FEC-IKEV2-MIB
36 objects
Management Information for IKEv2 of IPSec Subsystem
Imported Objects
| BINTEC-MIB MISSING | BitValue Date HexValue ipsec |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE snmpModules TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TestAndIncr TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.26.21 | Tableikev2SaTable | not-accessible | current | This table contains the list of currently active IKE security associations, that are created using IKEv2 protocol. |
| 1.3.6.1.4.1.272.4.26.21.1 | Rowikev2SaEntry | not-accessible | current | This object contains an IKE security association. |
| 1.3.6.1.4.1.272.4.26.21.1.1 | Columnikev2SaIndex | read-only | current | A unique index for this entry. |
| 1.3.6.1.4.1.272.4.26.21.1.2 | Columnikev2SaState | read-write | current | |
| 1.3.6.1.4.1.272.4.26.21.1.3 | Columnikev2SaAuthMethod | read-only | current | |
| 1.3.6.1.4.1.272.4.26.21.1.4 | Columnikev2SaEncAlg | read-only | current | The encryption algorithm used for the IKE_SA. Possible values: des(2), des3(3), rc5(4), idea(5), cast(6), blowfish(7), aes-cbc(12), aes-ctr(13) |
| 1.3.6.1.4.1.272.4.26.21.1.5 | Columnikev2SaIntegAlg | read-only | current | The integrity protection algorithm used for the IKE_SA. Possible values: hmac-md5-96(1), hmac-sha1-96(2) |
| 1.3.6.1.4.1.272.4.26.21.1.6 | Columnikev2SaPrfAlg | read-only | current | The hash algorithm used for the pseudo random function. Possible values: hmac-md5(1), hmac-sha1(2) |
| 1.3.6.1.4.1.272.4.26.21.1.7 | Columnikev2SaGroup | read-only | current | The Diffie-Hellman group used for the IKE_SA. Possible values: 1 - DH-group 768-bit MODP, 2 - DH-group 1024-bit MODP |
| 1.3.6.1.4.1.272.4.26.21.1.8 | Columnikev2SaRole | read-only | current | |
| 1.3.6.1.4.1.272.4.26.21.1.9 | Columnikev2SaLocalId | read-only | current | The local ID used for authentication. |
| 1.3.6.1.4.1.272.4.26.21.1.10 | Columnikev2SaRemoteId | read-only | current | The remote ID used for authentication. |
| 1.3.6.1.4.1.272.4.26.21.1.11 | Columnikev2SaLocalIp | read-only | current | The local IP address used in the IKE communication. |
| 1.3.6.1.4.1.272.4.26.21.1.12 | Columnikev2SaRemoteIp | read-only | current | The remote IP address used in the IKE communication. |
| 1.3.6.1.4.1.272.4.26.21.1.13 | Columnikev2SaSpiI | read-only | current | The SPI of the initiator. |
| 1.3.6.1.4.1.272.4.26.21.1.14 | Columnikev2SaSpiR | read-only | current | The SPI of the responder. |
| 1.3.6.1.4.1.272.4.26.21.1.15 | Columnikev2SaCreated | read-only | current | Time the SA was created. |
| 1.3.6.1.4.1.272.4.26.21.1.16 | Columnikev2SaLastUsed | read-only | current | Time the SA was used last. |
| 1.3.6.1.4.1.272.4.26.21.1.17 | Columnikev2SaExpires | read-only | current | Time the SA will expire. |
| 1.3.6.1.4.1.272.4.26.21.1.18 | Columnikev2SaNumCerts | read-only | current | The number of certificates received from the remote side when negotiating this SA. |
| 1.3.6.1.4.1.272.4.26.21.1.19 | Columnikev2SaNumNegotiations | read-only | current | This object specifies the number of currently active negotiations for this SA. |
| 1.3.6.1.4.1.272.4.26.21.1.20 | Columnikev2SaBytes | read-only | current | Number of bytes transmitted using this SA. |
| 1.3.6.1.4.1.272.4.26.21.1.21 | Columnikev2SaPeerIndex | read-only | current | The index of the peer for which this SA was created. |
| 1.3.6.1.4.1.272.4.26.21.1.22 | Columnikev2SaLocalPort | read-only | current | Local port currently used for the SA. |
| 1.3.6.1.4.1.272.4.26.21.1.23 | Columnikev2SaRemotePort | read-only | current | Remote port currently used for the SA. |
| 1.3.6.1.4.1.272.4.26.22 | Tableikev2ProfileTable | not-accessible | current | This table contains the list of IKE_SA profiles. these profiles are neede when using IKEv2 protocol. |
| 1.3.6.1.4.1.272.4.26.22.1 | Rowikev2ProfileEntry | not-accessible | current | This object contains an IKE_SA profile. |
| 1.3.6.1.4.1.272.4.26.22.1.1 | Columnikev2PrfIndex | read-write | current | A unique index identifying this entry. |
| 1.3.6.1.4.1.272.4.26.22.1.2 | Columnikev2PrfDescription | read-write | current | An optional description for this profile. |
| 1.3.6.1.4.1.272.4.26.22.1.3 | Columnikev2PrfProposal | read-write | current | The index of the first IKE proposal which may be used for IKE SA negotiation with this profile. |
| 1.3.6.1.4.1.272.4.26.22.1.4 | Columnikev2PrfBlockTime | read-write | current | This object specifies the time in seconds for which a peer is blocked for any IPSec operations after a phase 1 initiator negotiation failed. Special values: -1… |
| 1.3.6.1.4.1.272.4.26.22.1.5 | Columnikev2PrfNatT | read-write | current | |
| 1.3.6.1.4.1.272.4.26.22.1.6 | Columnikev2PrfMtuMax | read-write | current | The maximum MTU value allowed for ipsecPeerMtu. Zero means use value from global profile, if this is the global profile, 1418 is assumed. Nonzero values smalle… |
| 1.3.6.1.4.1.272.4.26.22.1.7 | Columnikev2PrfLifeSeconds | read-write | current | The time (in seconds) after which an SA will be rekeyed. |
| 1.3.6.1.4.1.272.4.26.22.1.8 | Columnikev2PrfAliveCheck | read-write | current | This object specifies if a check is done to see whether the other endpoint is alive. (only for IKEv2). |
| 1.3.6.1.4.1.272.4.26.252 | Identityikev2MIB | Management Information for IKEv2 of IPSec Subsystem |