FEC-MPS-MIB
830 objects
This MIB file contains administration MIBs for MPS phone subsystem.
Imported Objects
| BINTEC-MIB MISSING | bibo BitValue Date HexValue |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.53 | IdentitympsMIB | This MIB file contains administration MIBs for MPS phone subsystem. | ||
| 1.3.6.1.4.1.272.4.53.1 | NodempsSetup | |||
| 1.3.6.1.4.1.272.4.53.1.1 | NodempsSysConfig | |||
| 1.3.6.1.4.1.272.4.53.1.1.1 | ScalarmpsSysConfigCountry | read-write | current | This variable contains the country code settings of the PBX, e.g. change CLIP information at calls to exter, change impedance settings at internal analogue por… |
| 1.3.6.1.4.1.272.4.53.1.1.2 | ScalarmpsSysConfigSetExchangeDate | read-write | obsolete | Accept time and date is off, acceppt from exchange or accept from time server. |
| 1.3.6.1.4.1.272.4.53.1.1.3 | ScalarmpsSysConfigFacilities | read-write | current | System facilities: highRingerFrequency: a/b extension ringing frequency (0=50 Hz, 1=25 Hz) handoverBusyExtension: This value determines if handover to busy ext… |
| 1.3.6.1.4.1.272.4.53.1.1.4 | ScalarmpsSysConfigAreaCode | read-write | current | This variable contains the digits for the area code (national number, e.g. '5171'). |
| 1.3.6.1.4.1.272.4.53.1.1.5 | ScalarmpsSysConfigCountryCode | read-write | current | This variable contains the digits for the country code (international number, e.g '49'). |
| 1.3.6.1.4.1.272.4.53.1.1.6 | ScalarmpsSysConfigCodeInternationalPrefix | read-write | current | This variable contains the digits for international prefix code. |
| 1.3.6.1.4.1.272.4.53.1.1.7 | ScalarmpsSysConfigCodeNationalPrefix | read-write | current | This variable contains the digit for national prefix code. |
| 1.3.6.1.4.1.272.4.53.1.1.8 | ScalarmpsSysConfigCityCode | read-write | current | This variable contains the digit for the city code prefix. Extension with dial authorisation = 'local' can only dial numbers with this prefix. |
| 1.3.6.1.4.1.272.4.53.1.1.9 | ScalarmpsSysConfigLanguage | read-write | current | This variable contains the language code setting, e.g for system provided menue. |
| 1.3.6.1.4.1.272.4.53.1.1.10 | ScalarmpsSysConfigDefaultTargetType | read-write | current | This variable contains the default target type of system, if no incoming external call distribution match. 'off' means busy signalling to external subscriber. |
| 1.3.6.1.4.1.272.4.53.1.1.11 | ScalarmpsSysConfigDefaultTargetIndex | read-write | current | This variable contains index of the target table or zero (busy signalling), mpsSysConfigDefaultTargetType=group : index = mpsGroupIndex. mpsSysConfigDefaultTar… |
| 1.3.6.1.4.1.272.4.53.1.1.12 | ScalarmpsSysConfigExtMoHVolume | read-write | current | This variable contains the volume adjustment level for the external MoH played back via the audio-in jack (approximately in 3 dB steps): negative values -> att… |
| 1.3.6.1.4.1.272.4.53.1.1.13 | ScalarmpsSysConfigPreselectionCode | read-write | current | This variable contains the digits for system preselection (call-by-call). |
| 1.3.6.1.4.1.272.4.53.1.2 | NodempsSysTimer | |||
| 1.3.6.1.4.1.272.4.53.1.2.1 | ScalarmpsSysTimerCFNR | read-write | current | This variable contains the length of timer in seconds of call forwarding no reply. |
| 1.3.6.1.4.1.272.4.53.1.2.2 | ScalarmpsSysTimerExternalDoorIntercomTimeout | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.2.3 | ScalarmpsSysTimerRecallTimeout | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.2.4 | ScalarmpsSysTimerRecallBusyTimeout | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.2.5 | ScalarmpsSysTimerDirectCall | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.2.6 | ScalarmpsSysTimerExternalAlarmCallTimeout | read-write | obsolete | This variable contains the length of timer. For further implementations this global variable (that never shown via GUI until now) is obsolete und swapped to th… |
| 1.3.6.1.4.1.272.4.53.1.2.7 | ScalarmpsSysTimerDropCallNoReply | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.2.8 | ScalarmpsSysTimerDTMFAck | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.2.9 | ScalarmpsSysTimerDiallingBreakGSM | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.2.10 | ScalarmpsSysTimerSystemPark | read-write | current | This variable contains the length of timer in seconds. |
| 1.3.6.1.4.1.272.4.53.1.3 | NodempsSysCharge | |||
| 1.3.6.1.4.1.272.4.53.1.3.1 | ScalarmpsSysChargeProtocol | read-write | current | This value determine the charging protocol on the internal isdn ports. You have three options here: KEYPAD protocol - Charge data is transferred such that it c… |
| 1.3.6.1.4.1.272.4.53.1.3.2 | ScalarmpsSysChargeFrequency | read-write | obsolete | This value determine the frequency of the charge pulse for analogue terminals. |
| 1.3.6.1.4.1.272.4.53.1.3.3 | ScalarmpsSysChargeIncomingCall | read-write | obsolete | You can define whether acquisition is to be made for all connection (1), or only when a project number is input (2). |
| 1.3.6.1.4.1.272.4.53.1.3.4 | ScalarmpsSysChargeMultiplier | read-write | current | Charge rate multiplier. e.g. 1 Unit = 0,064 -> mpsSysChargeMultiplier = 64, mpsSysChargeExponent = -3. 1 Unit = 1,200 -> mpsSysChargeMultiplier = 12, mpsSysCha… |
| 1.3.6.1.4.1.272.4.53.1.3.5 | ScalarmpsSysChargeExponent | read-write | current | Charge rate exponent. e.g. 1 Unit = 0,064 -> mpsSysChargeMultiplier = 64, mpsSysChargeExponent = -3. 1 Unit = 1,200 -> mpsSysChargeMultiplier = 12, mpsSysCharg… |
| 1.3.6.1.4.1.272.4.53.1.3.6 | ScalarmpsSysChargeCurrencyName | read-write | current | This currency name will be displayed by the terminal. |
| 1.3.6.1.4.1.272.4.53.1.3.7 | ScalarmpsSysChargeExtensionIndex | read-write | obsolete | You can define an extension index at which internal telephone the communication data overflow is to be signaled per uus1 message. |
| 1.3.6.1.4.1.272.4.53.1.3.8 | ScalarmpsSysChargeHiddenDigitsCountA | read-write | current | You can enter the number of hidden digit positions for incoming calls. The positions (numbers) are concealed from right to left (from the end of the number). -… |
| 1.3.6.1.4.1.272.4.53.1.3.9 | ScalarmpsSysChargeHiddenDigitsCountB | read-write | current | You can enter the number of hidden digit positions for outgoing calls. The positions (numbers) are concealed from right to left (from the end of the number). -… |
| 1.3.6.1.4.1.272.4.53.1.3.10 | ScalarmpsSysChargeSaveOutgoingCall | read-write | current | System setting for saving call data records for outgoing calls: never(1) : no call data records for outgoing calls saved. all(2) : save call data records for a… |
| 1.3.6.1.4.1.272.4.53.1.3.11 | ScalarmpsSysChargeSaveIncomingCall | read-write | current | System setting for saving call data records for incoming calls: never(1) : no call data records for incoming calls saved. all(2) : save call data records for a… |
| 1.3.6.1.4.1.272.4.53.1.3.12 | ScalarmpsSysChargePrintingHost | read-write | current | This variable contains the host name for printing call data record. For local printing (serial printer), set to 'localhost'. For disable leave string empty. |
| 1.3.6.1.4.1.272.4.53.1.3.13 | ScalarmpsSysChargePrintingTcpPort | read-write | current | This variable contains the tcp port for printing call data record. For local printing (serial printer), set to an arbitrary port matching that one in soipConfi… |
| 1.3.6.1.4.1.272.4.53.1.4 | TablempsSysCalendarTable | not-accessible | current | This table contains information for each circuit switching time of the calendar. |
| 1.3.6.1.4.1.272.4.53.1.4.1 | RowmpsSysCalendarEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.1.4.1.1 | ColumnmpsSysCalendarIndex | read-write | obsolete | A unique value for each calendar. |
| 1.3.6.1.4.1.272.4.53.1.4.1.2 | ColumnmpsSysCalendarDay | read-write | obsolete | A unique value for each day of the calendar. |
| 1.3.6.1.4.1.272.4.53.1.4.1.3 | ColumnmpsSysCalendarPosition | read-write | obsolete | A unique value for each calendar, day and position. |
| 1.3.6.1.4.1.272.4.53.1.4.1.4 | ColumnmpsSysCalendarHour | read-write | obsolete | This variable contains the hour for the switching time. |
| 1.3.6.1.4.1.272.4.53.1.4.1.5 | ColumnmpsSysCalendarMinute | read-write | obsolete | This variable contains the minutes for the switching time. |
| 1.3.6.1.4.1.272.4.53.1.4.1.6 | ColumnmpsSysCalendarMode | read-write | obsolete | This variable contains the mode, to which the calendar will be switched. |
| 1.3.6.1.4.1.272.4.53.1.4.1.7 | ColumnmpsSysCalendarAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.1.5 | NodempsSysUserConfig | |||
| 1.3.6.1.4.1.272.4.53.1.5.1 | ScalarmpsSysUserConfigPIN | read-write | current | This variable contains the system PIN code for configuration. 'none' = inactive (can not be dialed). |
| 1.3.6.1.4.1.272.4.53.1.5.2 | ScalarmpsSysUserConfigExternPIN | read-write | current | This variable contains the system PIN code for remote control. |
| 1.3.6.1.4.1.272.4.53.1.5.3 | ScalarmpsSysUserConfigFacilities | read-write | current | System facilities. (1) enabled or (0) disabled: remoteConfig : Remote switching/ remote control. remoteAccess : Remote access. callRecordPrinting: Print call d… |
| 1.3.6.1.4.1.272.4.53.1.5.4 | ScalarmpsSysUserConfigCoS | read-write | current | This variable contains the current Class Of Service mode. |
| 1.3.6.1.4.1.272.4.53.1.5.5 | ScalarmpsSysUserConfigPBXMode | read-write | current | This variable contains the current PBX mode. |
| 1.3.6.1.4.1.272.4.53.1.5.6 | ScalarmpsSysUserConfigNightGroupMode | read-write | current | This variable contains the active group mode when the mpsSysConfigPBXMode = night. 0 = night mode for groups is off, individual settings used (day). |
| 1.3.6.1.4.1.272.4.53.1.5.7 | ScalarmpsSysUserConfigNightDoorIntercomMode | read-write | current | This variable contains the active DoorIntercom mode when variable mpsSysConfigPBXMode is set to night. Value 0 means night mode for door intercom units is off,… |
| 1.3.6.1.4.1.272.4.53.1.5.8 | ScalarmpsSysUserConfigNightTrunkMode | read-write | current | This variable contains the active trunk mode when variable mpsSysConfigPBXMode is set to night and mpsTrunkNumberTarget is set to re-route. 0 = night mode for … |
| 1.3.6.1.4.1.272.4.53.1.5.9 | ScalarmpsSysUserConfigNightExtensionMode | read-write | current | This variable contains the active extension mode when variable mpsSysConfigPBXMode is set to night and rerouting is active. 0 = night mode for extension is off… |
| 1.3.6.1.4.1.272.4.53.1.5.10 | ScalarmpsSysUserConfigNightGlobalReRouteMode | read-write | current | This variable contains the active reroute mode when variable mpsSysConfigPBXMode is set to night and global rerouting is available. 0 = night mode for global r… |
| 1.3.6.1.4.1.272.4.53.1.5.11 | ScalarmpsSysUserConfigDayGlobalReRouteMode | read-write | current | This variable contains the active global reroute mode when variable mpsSysConfigPBXMode is set to day and global rerouting is available. |
| 1.3.6.1.4.1.272.4.53.1.5.12 | ScalarmpsSysUserConfigNightAlarmInputMode | read-write | current | This variable contains the active alarm input mode when variable mpsSysConfigPBXMode is set to night. 0 = night mode for alarm input is off, so use the individ… |
| 1.3.6.1.4.1.272.4.53.2 | NodempsNumber | |||
| 1.3.6.1.4.1.272.4.53.2.1 | TablempsEmergencyNumberTable | not-accessible | current | This Table contains the numbers of emergency calls. Emergency numbers can be dialed, even if all B-channels of the PBX are busy. |
| 1.3.6.1.4.1.272.4.53.2.1.1 | RowmpsEmergencyNumberEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.2.1.1.1 | ColumnmpsEmergencyNumberIndex | read-write | current | A unique value for each emergency number. |
| 1.3.6.1.4.1.272.4.53.2.1.1.2 | ColumnmpsEmergencyNumberTarget | read-write | current | Contains the emergency number. |
| 1.3.6.1.4.1.272.4.53.2.1.1.3 | ColumnmpsEmergencyNumberDescr | read-write | current | Contains the description of emergency number. |
| 1.3.6.1.4.1.272.4.53.2.1.1.4 | ColumnmpsEmergencyNumberAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.2.2 | TablempsDirectCallNumberTable | not-accessible | current | This table contains the numbers for direct calls. |
| 1.3.6.1.4.1.272.4.53.2.2.1 | RowmpsDirectCallNumberEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.2.2.1.1 | ColumnmpsDirectCallNumberIndex | read-write | current | A unique value for each direct call number. This index can be selected within the mpsExtensionUserTable. |
| 1.3.6.1.4.1.272.4.53.2.2.1.2 | ColumnmpsDirectCallNumberTarget | read-write | current | Contains the direct call number. |
| 1.3.6.1.4.1.272.4.53.2.2.1.3 | ColumnmpsDirectCallNumberDescr | read-write | current | Contains the description of direct call. |
| 1.3.6.1.4.1.272.4.53.2.2.1.4 | ColumnmpsDirectCallNumberAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.2.3 | TablempsWhitelistNumberTable | not-accessible | current | This table contains the unrestricted numbers for outgoing calls. For each extension can be choosen, if unrestricted filter is enabled or disabled. |
| 1.3.6.1.4.1.272.4.53.2.3.1 | RowmpsWhitelistNumberEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.2.3.1.1 | ColumnmpsWhitelistNumberIndex | read-write | current | A unique value for each unrestricted number. |
| 1.3.6.1.4.1.272.4.53.2.3.1.2 | ColumnmpsWhitelistNumberTarget | read-write | current | The unrestricted number or prefix number. |
| 1.3.6.1.4.1.272.4.53.2.3.1.3 | ColumnmpsWhitelistNumberAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.2.4 | TablempsBlacklistNumberTable | not-accessible | current | This table contains the restricted numbers for outgoing calls. For each extension can be choosen, if restricted filter is enabled or disabled. |
| 1.3.6.1.4.1.272.4.53.2.4.1 | RowmpsBlacklistNumberEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.2.4.1.1 | ColumnmpsBlacklistNumberIndex | read-write | current | A unique value for each restricted number. |
| 1.3.6.1.4.1.272.4.53.2.4.1.2 | ColumnmpsBlacklistNumberTarget | read-write | current | The restricted number or prefix number. |
| 1.3.6.1.4.1.272.4.53.2.4.1.3 | ColumnmpsBlacklistNumberAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.2.5 | TablempsSpecialNumberTable | not-accessible | current | This table contains the information for special numbers (TNetBox, SMS-Server). |
| 1.3.6.1.4.1.272.4.53.2.5.1 | RowmpsSpecialNumberEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.2.5.1.1 | ColumnmpsSpecialNumberType | read-write | obsolete | This variable contains the type of the number. |
| 1.3.6.1.4.1.272.4.53.2.5.1.2 | ColumnmpsSpecialNumberPrio | read-write | obsolete | A unique value for each type a prio. |
| 1.3.6.1.4.1.272.4.53.2.5.1.3 | ColumnmpsSpecialNumberTarget | read-write | obsolete | The digits of the special number. |
| 1.3.6.1.4.1.272.4.53.2.5.1.4 | ColumnmpsSpecialNumberAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.2.6 | TablempsSystemNumberTable | not-accessible | current | This table contains additional system numbers. |
| 1.3.6.1.4.1.272.4.53.2.6.1 | RowmpsSystemNumberEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.2.6.1.1 | ColumnmpsSystemNumberIndex | read-write | current | A unique value for each system number. |
| 1.3.6.1.4.1.272.4.53.2.6.1.2 | ColumnmpsSystemNumberType | read-write | current | Type of system number. service-number(1) : internal service number. trunk-access(2) : line access digit to external line. pickup(3) : pickup an internal call. … |
| 1.3.6.1.4.1.272.4.53.2.6.1.3 | ColumnmpsSystemNumberNumber | read-write | current | The digits of the system number. |
| 1.3.6.1.4.1.272.4.53.2.6.1.4 | ColumnmpsSystemNumberAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.2.6.1.5 | ColumnmpsSystemNumberPosition | read-write | current | A counter for open-inquiry(7) and bundle-req(8) (mpsSystemNumberType). If mpsSystemNumberType = bundle-req, mpsSystemNumberPosition referecenes to mpsTrunkBund… |
| 1.3.6.1.4.1.272.4.53.3 | NodempsCommon | |||
| 1.3.6.1.4.1.272.4.53.3.1 | TablempsDeviceTable | not-accessible | current | This table contains information about each call control interface (device internal and external). |
| 1.3.6.1.4.1.272.4.53.3.1.1 | RowmpsDeviceEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.1.1.1 | ColumnmpsDeviceIfIndex | read-write | current | A unique value for each device. |
| 1.3.6.1.4.1.272.4.53.3.1.1.2 | ColumnmpsDeviceMode | read-write | current | Contains mode of the device. itrunk-pmp(2) : isdn extern, point-to-multipoint itrunk-pp(3) : isdn extern, point-to-point iline-pmp(4) : isdn intern, point-to-m… |
| 1.3.6.1.4.1.272.4.53.3.1.1.3 | ColumnmpsDeviceDisplayName | read-write | current | Display name of the device. |
| 1.3.6.1.4.1.272.4.53.3.1.1.4 | ColumnmpsDeviceBundle | read-write | obsolete | This variable contains the bundle number of the device. |
| 1.3.6.1.4.1.272.4.53.3.1.1.5 | ColumnmpsDeviceTrunkGroup | read-write | current | A unique value for each trunk group index (reference to mpsTrunkGroupTable). |
| 1.3.6.1.4.1.272.4.53.3.1.1.6 | ColumnmpsDeviceDefaultExtension | read-write | current | Defines the extension to be used for outgoing calls without calling party number (reference to mpsExtensionTable). |
| 1.3.6.1.4.1.272.4.53.3.1.1.7 | ColumnmpsDeviceBusMode | read-write | obsolete | The configuration of the internal isdn device port is standard(1) or extended(2) |
| 1.3.6.1.4.1.272.4.53.3.1.1.8 | ColumnmpsDeviceClipNoScreening | read-write | obsolete | This value determine when the mpsDeviceMode = itrunk-pp, wether ClipNoScreening is disabled(1) or individual(2) or global(3). |
| 1.3.6.1.4.1.272.4.53.3.1.1.9 | ColumnmpsDeviceAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.1.1.10 | ColumnmpsDeviceLayer2AlwaysOn | read-write | current | This value determine if the Layer2 for this external isdn port is keept permanently active (true) or not (false). |
| 1.3.6.1.4.1.272.4.53.3.1.1.11 | ColumnmpsDeviceType | read-write | current | Set to 'tdm' for physical interfaces (isdn, pots) and set to 'ip' or 'capi' for virtual interfaces. |
| 1.3.6.1.4.1.272.4.53.3.2 | TablempsDeviceVirtualTable | not-accessible | current | This table contains information for each virtual device. |
| 1.3.6.1.4.1.272.4.53.3.2.1 | RowmpsDeviceVirtualEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.3.2.1.1 | ColumnmpsDeviceVirtualIndex | read-write | obsolete | A unique value for each virtual device. |
| 1.3.6.1.4.1.272.4.53.3.2.1.2 | ColumnmpsDeviceVirtualMode | read-write | obsolete | Contains mode of the device. |
| 1.3.6.1.4.1.272.4.53.3.2.1.3 | ColumnmpsDeviceVirtualDefaultExtension | read-write | obsolete | Contains the extension index of an internal device port, for default. |
| 1.3.6.1.4.1.272.4.53.3.2.1.4 | ColumnmpsDeviceVirtualAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.3 | TablempsTrunkGroupTable | not-accessible | current | This table contains global information about external trunk groups. |
| 1.3.6.1.4.1.272.4.53.3.3.1 | RowmpsTrunkGroupEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.3.1.1 | ColumnmpsTrunkGroupIndex | read-write | current | A unique value for each trunk group. |
| 1.3.6.1.4.1.272.4.53.3.3.1.2 | ColumnmpsTrunkGroupLayer2AlwaysOn | read-write | obsolete | This value determine if the Layer2 for this external isdn port is always on (1) or off (2). |
| 1.3.6.1.4.1.272.4.53.3.3.1.3 | ColumnmpsTrunkGroupDefaultTargetType | read-write | current | This variable contains the target type for misdialing, default is group. 'none' means no routing (busy signalling). 'global' -> use system target 'mpsSysConfig… |
| 1.3.6.1.4.1.272.4.53.3.3.1.4 | ColumnmpsTrunkGroupDefaultTargetGroupIndex | read-write | current | This variable contains the default target group index if the mpsTrunkGroupDefaultTargetType = group (1). |
| 1.3.6.1.4.1.272.4.53.3.3.1.5 | ColumnmpsTrunkGroupDefaultTargetExtensionIndex | read-write | current | This variable contains the default target extension index if the mpsTrunkGroupDefaultTargetType = extension(2). |
| 1.3.6.1.4.1.272.4.53.3.3.1.6 | ColumnmpsTrunkGroupAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.3.1.7 | ColumnmpsTrunkGroupOutSigMode | read-write | current | This variable contains the outgoing signalling mode for this TrunkGroup. standard(1) : standard signalling cnsGlobal(2) : for all outgoing calls, the global CL… |
| 1.3.6.1.4.1.272.4.53.3.3.1.8 | ColumnmpsTrunkGroupBaseNumber | read-write | current | This variable contains the base number of the point-to-point port. |
| 1.3.6.1.4.1.272.4.53.3.3.1.9 | ColumnmpsTrunkGroupFixedOutNumber | read-write | current | This variable contains the number for fixed outgoing number signalling. 1. mpsTrunkGroupOutSigMode = fixedDDI : the fixed DDI for outgoing calls. 2. mpsTrunkGr… |
| 1.3.6.1.4.1.272.4.53.3.3.1.10 | ColumnmpsTrunkGroupDisplayName | read-write | current | Display name of the trunk group. |
| 1.3.6.1.4.1.272.4.53.3.3.1.11 | ColumnmpsTrunkGroupFacilities | read-write | current | Special facilities for trunks. ignoreBaseNumber : for P-P-trunks - ignore base number for incoming calls. suppressBaseNumber: for P-P-trunks - don't send base … |
| 1.3.6.1.4.1.272.4.53.3.3.1.12 | ColumnmpsTrunkGroupOutNumberType | read-write | current | This variable contains the type of number of the calling party for outgoing calls. 'default' means the type of number will be set by the PBX, otherwise use unk… |
| 1.3.6.1.4.1.272.4.53.3.3.1.13 | ColumnmpsTrunkGroupInterfaceType | read-write | current | This variable contains the interface type, for which type of interface this trunk group can be used. isdn-pmp(1) : isdn extern, point-to-multipoint isdn-pp(2) … |
| 1.3.6.1.4.1.272.4.53.3.4 | TablempsTrunkGroupVoIPTable | not-accessible | current | This table contains information about external VoIP provider. |
| 1.3.6.1.4.1.272.4.53.3.4.1 | RowmpsTrunkGroupVoIPEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.4.1.1 | ColumnmpsTrunkGroupVoIPIndex | read-write | current | A unique value for each trunk group. |
| 1.3.6.1.4.1.272.4.53.3.4.1.2 | ColumnmpsTrunkGroupVoIPType | read-write | current | This value determines the type of the VoIP provider. |
| 1.3.6.1.4.1.272.4.53.3.4.1.3 | ColumnmpsTrunkGroupVoIPMode | read-write | current | This value determine the mode of the VoIP. |
| 1.3.6.1.4.1.272.4.53.3.4.1.4 | ColumnmpsTrunkGroupVoIPDescr | read-write | current | This variable contains a textual description of the VoIP provider. |
| 1.3.6.1.4.1.272.4.53.3.4.1.5 | ColumnmpsTrunkGroupVoIPBundle | read-write | obsolete | This variable contains the number of the bundle for this provider. |
| 1.3.6.1.4.1.272.4.53.3.4.1.6 | ColumnmpsTrunkGroupVoIPDomain | read-write | current | This variable contains name, port and transport of the registrar. example: 192.0.0.1:5060;tcp or phone30.bintec.de:5060;upd |
| 1.3.6.1.4.1.272.4.53.3.4.1.7 | ColumnmpsTrunkGroupVoIPIpAddress | read-write | current | This variable contains IP adress of the registrar. |
| 1.3.6.1.4.1.272.4.53.3.4.1.8 | ColumnmpsTrunkGroupVoIPUserAccount | read-write | current | This variable contains the user account. |
| 1.3.6.1.4.1.272.4.53.3.4.1.9 | ColumnmpsTrunkGroupVoIPAuthName | read-write | current | This variable contains authorisation name. |
| 1.3.6.1.4.1.272.4.53.3.4.1.10 | ColumnmpsTrunkGroupVoIPAuthPassword | read-write | current | This variable contains authorisation password. |
| 1.3.6.1.4.1.272.4.53.3.4.1.11 | ColumnmpsTrunkGroupVoIPFacilities | read-write | current | Special facilities of the IP provider. internationalNumber: Generate international phone number. CLIR: 1 -> Deactivate number suppression. UseUserID: Use UserI… |
| 1.3.6.1.4.1.272.4.53.3.4.1.12 | ColumnmpsTrunkGroupVoIPNetwork | read-write | obsolete | This variable contains the special location index. |
| 1.3.6.1.4.1.272.4.53.3.4.1.13 | ColumnmpsTrunkGroupVoIPInviteTimeout | read-write | current | This variable contains the length of the end of dial timer. |
| 1.3.6.1.4.1.272.4.53.3.4.1.14 | ColumnmpsTrunkGroupVoIPAdminStatus | read-write | current | VoIP Provider is active or not active. Set to delete, to discard the whole entry. |
| 1.3.6.1.4.1.272.4.53.3.4.1.15 | ColumnmpsTrunkGroupVoIPOperationStatus | read-only | current | This variable contains the actual operation status. notregistered : client is not registered registering : notregistered, registration pending registered : cli… |
| 1.3.6.1.4.1.272.4.53.3.4.1.16 | ColumnmpsTrunkGroupVoIPTestCommand | read-write | current | This variable contains the current status. Set to test, to test the VoIP provider. Automatically set to 'idle' when complete. |
| 1.3.6.1.4.1.272.4.53.3.4.1.17 | ColumnmpsTrunkGroupVoIPTestResult | read-only | current | This variable contains the current status. |
| 1.3.6.1.4.1.272.4.53.3.4.1.18 | ColumnmpsTrunkGroupVoIPCurrentCalls | read-only | current | This variable contains the current calls. |
| 1.3.6.1.4.1.272.4.53.3.4.1.19 | ColumnmpsTrunkGroupVoIPReregisterTimer | read-write | current | This variable contains reregistering timer in seconds. |
| 1.3.6.1.4.1.272.4.53.3.4.1.20 | ColumnmpsTrunkGroupVoIPCodecs | read-write | current | The supported Codecs of the Provider set one or more of the following bit values: ulaw (1) alaw (2) g729 (4) g726 (8) g726_16 (16) g726_32 (32) g726_40 (64) g7… |
| 1.3.6.1.4.1.272.4.53.3.4.1.21 | ColumnmpsTrunkGroupVoIPCodecOrder | read-write | current | Sorting the codecs default -> system default order quality -> highest quality first lowest -> lowest bandwidth first highest -> highest bandwidth first |
| 1.3.6.1.4.1.272.4.53.3.4.1.22 | ColumnmpsTrunkGroupVoIPProxy | read-write | current | This variable contains name, port and transport of the outbound proxy. example: 192.0.0.1:5060;tcp or phone30.bintec.de:5060;upd |
| 1.3.6.1.4.1.272.4.53.3.4.1.23 | ColumnmpsTrunkGroupVoIPSTUNServer | read-write | current | This variable contains name and portof the STUN server. example: 192.0.0.1:5060 or phone30.bintec.de:5060 |
| 1.3.6.1.4.1.272.4.53.3.4.1.24 | ColumnmpsTrunkGroupVoIPMaxSimCalls | read-write | current | This variable contains the maximum of simultaneous connection for this provider. 0 = no limitation. |
| 1.3.6.1.4.1.272.4.53.3.4.1.25 | ColumnmpsTrunkGroupVoIPReplaceSrc | read-write | current | This variable contains the source string for substitution of the incoming number prefix. If the incoming number prefix is equal to this string, the incoming nu… |
| 1.3.6.1.4.1.272.4.53.3.4.1.26 | ColumnmpsTrunkGroupVoIPReplaceDest | read-write | current | String substitution, if the incoming number prefix is equal to the mpsTrunkGroupVoIPReplaceSrc string. |
| 1.3.6.1.4.1.272.4.53.3.4.1.27 | ColumnmpsTrunkGroupVoIPIfIndex | read-write | current | Reference to the interface index mpsDeviceIfIndex of the mspDeviceTable . |
| 1.3.6.1.4.1.272.4.53.3.4.1.28 | ColumnmpsTrunkGroupVoIPCodecProperties | read-write | current | A reference to mpsCodecPropertyTable for codec properties. If '0' use system default. |
| 1.3.6.1.4.1.272.4.53.3.4.1.29 | ColumnmpsTrunkGroupVoIPRealm | read-write | current | The Realm/Domain of the provider. This domain is used e.g. at registration or authentication instead of registration domain. |
| 1.3.6.1.4.1.272.4.53.3.4.1.30 | ColumnmpsTrunkGroupVoIPFromRealm | read-write | current | The From Realm/Domain of the provider. This domain is used after the '@' in the From information element in the SIP header. |
| 1.3.6.1.4.1.272.4.53.3.4.1.31 | ColumnmpsTrunkGroupVoIPCLIP | read-write | current | Use the phone number instead of the user account in the SIP header to indidcate the caller identity. This is provider dependent: display : transfer in DISPLAY … |
| 1.3.6.1.4.1.272.4.53.3.6 | TablempsTrunkGroupPOTSTable | not-accessible | current | This table contains advanced information of the external pots trunk groups. |
| 1.3.6.1.4.1.272.4.53.3.6.1 | RowmpsTrunkGroupPOTSEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.3.6.1.1 | ColumnmpsTrunkGroupPOTSIndex | read-write | obsolete | A unique value for each trunk group. |
| 1.3.6.1.4.1.272.4.53.3.6.1.2 | ColumnmpsTrunkGroupPOTSDialingType | read-write | obsolete | Type of dialling, DTMF and pulse dialing. |
| 1.3.6.1.4.1.272.4.53.3.6.1.3 | ColumnmpsTrunkGroupPOTSWait2Dial | read-write | obsolete | Time slice in seconds, before digits will be send to trunk. Set to 0: dial tone detection is on. |
| 1.3.6.1.4.1.272.4.53.3.6.1.4 | ColumnmpsTrunkGroupPOTSBusytoneDetection | read-write | obsolete | This value determine if busystone detection is on (true) or off (false). |
| 1.3.6.1.4.1.272.4.53.3.6.1.5 | ColumnmpsTrunkGroupPOTSBusytoneTimeSlice | read-write | obsolete | Max time slice in seconds, to detect the busytone. |
| 1.3.6.1.4.1.272.4.53.3.6.1.6 | ColumnmpsTrunkGroupPOTSClip | read-write | obsolete | Number display (CLIP). |
| 1.3.6.1.4.1.272.4.53.3.6.1.7 | ColumnmpsTrunkGroupPOTSChargeFrequency | read-write | obsolete | This value determine the frequency of the charge pulse for POTS trunk groups |
| 1.3.6.1.4.1.272.4.53.3.6.1.8 | ColumnmpsTrunkGroupPOTSEndOfDial | read-write | obsolete | End of dial time slice in seconds. |
| 1.3.6.1.4.1.272.4.53.3.6.1.9 | ColumnmpsTrunkGroupPOTSAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.6.1.10 | ColumnmpsTrunkGroupPOTSFaxSwitchIndex | read-write | obsolete | A unique value for each fax switch. |
| 1.3.6.1.4.1.272.4.53.3.6.1.11 | ColumnmpsTrunkGroupPOTSUefs | read-write | obsolete | This value determine if 'DDI on POTS' (UEFS) is on (true) or off (false). |
| 1.3.6.1.4.1.272.4.53.3.7 | TablempsTrunkNumberTable | not-accessible | current | This table contains advanced information about external numbers. |
| 1.3.6.1.4.1.272.4.53.3.7.1 | RowmpsTrunkNumberEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.7.1.1 | ColumnmpsTrunkNumberIndex | read-write | current | A unique value for each trunk number. |
| 1.3.6.1.4.1.272.4.53.3.7.1.2 | ColumnmpsTrunkNumberGroup | read-write | current | A unique value for each trunk group index. 0 allowed for mpsTrunkNumberType = cnsIndividual, for all trunk groups |
| 1.3.6.1.4.1.272.4.53.3.7.1.3 | ColumnmpsTrunkNumberNumberIndex | read-write | current | A unique value for each number entry of a trunk group. |
| 1.3.6.1.4.1.272.4.53.3.7.1.4 | ColumnmpsTrunkNumberType | read-write | current | This variable contains the information of the type of number: msn : MSN ddi : DDI (direct dialling in) cnsIndividual : clip no screening additionalMSN : MSN at… |
| 1.3.6.1.4.1.272.4.53.3.7.1.5 | ColumnmpsTrunkNumberTarget | read-write | current | The external number can be assigned to an internal target: group: a group of internal extensions. extension: one internal extension. call-through: use the call… |
| 1.3.6.1.4.1.272.4.53.3.7.1.6 | ColumnmpsTrunkNumberTargetIndex | read-write | current | This variable contains index of the target table or zero, mpsTrunkNumberTarget=group : index = mpsGroupIndex. mpsTrunkNumberTarget=extension : index = Extensio… |
| 1.3.6.1.4.1.272.4.53.3.7.1.7 | ColumnmpsTrunkNumberNumberEntry | read-write | current | This variable contains the digits of the external number (MSN,DDI,...). |
| 1.3.6.1.4.1.272.4.53.3.7.1.8 | ColumnmpsTrunkNumberCalendar | read-write | current | Select a calendar index to switch the call distribution for immediately rerouting automatically. |
| 1.3.6.1.4.1.272.4.53.3.7.1.9 | ColumnmpsTrunkNumberDisplayName | read-write | current | Display name of the trunk number. |
| 1.3.6.1.4.1.272.4.53.3.7.1.10 | ColumnmpsTrunkNumberAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.7.1.11 | ColumnmpsTrunkNumberReRouteAppl | read-write | current | Index of ReRouting application in mpsReRouteApplTable. Value 0 means that ReRouting application is inactive. |
| 1.3.6.1.4.1.272.4.53.3.8 | TablempsTrunkNumberUserTable | not-accessible | current | This table contains information about current mode for incoming call distribution to an immediately rerouting function. |
| 1.3.6.1.4.1.272.4.53.3.8.1 | RowmpsTrunkNumberUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.8.1.1 | ColumnmpsTrunkNumberUserIndex | read-write | current | A unique value for each trunk number, references mpsTrunkNumberIndex in mpsTrunkNumberTable. |
| 1.3.6.1.4.1.272.4.53.3.8.1.2 | ColumnmpsTrunkNumberUserMode | read-write | current | This variable contains the actual mode for incoming call distribution to a reroute function. |
| 1.3.6.1.4.1.272.4.53.3.8.1.3 | ColumnmpsTrunkNumberUserAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.9 | TablempsTrunkNumberModeTable | not-accessible | current | This table contains reroute information for each trunk number and mode. |
| 1.3.6.1.4.1.272.4.53.3.9.1 | RowmpsTrunkNumberModeEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.9.1.1 | ColumnmpsTrunkNumberModeIndex | read-write | current | A unique value for each entry. |
| 1.3.6.1.4.1.272.4.53.3.9.1.2 | ColumnmpsTrunkNumberModeNumberIndex | read-write | current | This variable contains the trunk number index. Reference to mpsTrunkNumberTable. |
| 1.3.6.1.4.1.272.4.53.3.9.1.3 | ColumnmpsTrunkNumberModeMode | read-write | current | For each trunk number index (mpsTrunkNumberModeNumberIndex), several modes can exists. |
| 1.3.6.1.4.1.272.4.53.3.9.1.4 | ColumnmpsTrunkNumberModeRerouteIndex | read-write | current | Index of the ReRouting function in mpsReRouteTable. 0 = ReRouting function deactived. |
| 1.3.6.1.4.1.272.4.53.3.9.1.5 | ColumnmpsTrunkNumberModeAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.10 | TablempsTrunkBundleTable | not-accessible | current | This table contains information of the trunk bundle configuration. |
| 1.3.6.1.4.1.272.4.53.3.10.1 | RowmpsTrunkBundleEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.10.1.1 | ColumnmpsTrunkBundleIndex | read-write | current | A unique value for each trunk bundle. |
| 1.3.6.1.4.1.272.4.53.3.10.1.2 | ColumnmpsTrunkBundleDescription | read-write | current | Description of the trunk bundle. |
| 1.3.6.1.4.1.272.4.53.3.10.1.3 | ColumnmpsTrunkBundleAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.3.11 | TablempsTrunkBundleEntryTable | not-accessible | current | This table contains information about relation of trunk group and bundles. |
| 1.3.6.1.4.1.272.4.53.3.11.1 | RowmpsTrunkBundleEntryEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.3.11.1.1 | ColumnmpsTrunkBundleEntryIndex | read-write | current | This variable contains the trunk bundle index of the mpsTrunkBundleTable for this trunk group. |
| 1.3.6.1.4.1.272.4.53.3.11.1.2 | ColumnmpsTrunkBundleEntryPrio | read-write | current | This variable contains the routing priority of the trunk group. |
| 1.3.6.1.4.1.272.4.53.3.11.1.3 | ColumnmpsTrunkBundleEntryTrunkGroup | read-write | current | This variable contains the trunk group index of the mpsTrunkGroupTable. |
| 1.3.6.1.4.1.272.4.53.3.11.1.4 | ColumnmpsTrunkBundleEntryAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.4 | NodempsSubscriber | |||
| 1.3.6.1.4.1.272.4.53.4.1 | TablempsSubscriberNumberTable | not-accessible | current | This table contains information about the call distribution for incoming external calls. |
| 1.3.6.1.4.1.272.4.53.4.1.1 | RowmpsSubscriberNumberEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.4.1.1.1 | ColumnmpsSubscriberNumberTrunkGroup | read-write | obsolete | A unique value for each trunk group index. |
| 1.3.6.1.4.1.272.4.53.4.1.1.2 | ColumnmpsSubscriberNumberIndex | read-write | obsolete | A unique value for each call distribution. |
| 1.3.6.1.4.1.272.4.53.4.1.1.3 | ColumnmpsSubscriberNumberType | read-write | obsolete | This variable contains the information of the type of number. |
| 1.3.6.1.4.1.272.4.53.4.1.1.4 | ColumnmpsSubscriberNumberTarget | read-write | obsolete | The external number can be assigned to internal teams or subscribers. |
| 1.3.6.1.4.1.272.4.53.4.1.1.5 | ColumnmpsSubscriberNumberGroupIndex | read-write | obsolete | This variable contains the group index, if mpsCallDistributionTargetType=team. |
| 1.3.6.1.4.1.272.4.53.4.1.1.6 | ColumnmpsSubscriberNumberExtensionIndex | read-write | obsolete | This variable contains the extension index, if mpsCallDistributionTargetType=extension. |
| 1.3.6.1.4.1.272.4.53.4.1.1.7 | ColumnmpsSubscriberNumberAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.4.2 | TablempsSubscriberNumberSimpleTable | not-accessible | current | This table contains the information of the external MSN number. |
| 1.3.6.1.4.1.272.4.53.4.2.1 | RowmpsSubscriberNumberSimpleEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.4.2.1.1 | ColumnmpsSubscriberNumberSimpleTrunkGroup | read-write | obsolete | A unique value for each trunk group index. |
| 1.3.6.1.4.1.272.4.53.4.2.1.2 | ColumnmpsSubscriberNumberSimpleIndex | read-write | obsolete | A unique value for each external MSN number. |
| 1.3.6.1.4.1.272.4.53.4.2.1.3 | ColumnmpsSubscriberNumberSimpleNumber | read-write | obsolete | This variable contains the digits of the external MSN number. |
| 1.3.6.1.4.1.272.4.53.4.2.1.4 | ColumnmpsSubscriberNumberSimpleType | read-write | obsolete | This variable contains the type of the external number. |
| 1.3.6.1.4.1.272.4.53.4.2.1.5 | ColumnmpsSubscriberNumberSimpleAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.4.4 | TablempsSubscriberNumberCompositePrefixTable | not-accessible | current | This table contains the information of the external DDI number. |
| 1.3.6.1.4.1.272.4.53.4.4.1 | RowmpsSubscriberNumberCompositePrefixEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.4.4.1.1 | ColumnmpsSubscriberNumberCompositePrefixTrunkGroup | read-write | obsolete | A unique value for each trunk group index. |
| 1.3.6.1.4.1.272.4.53.4.4.1.2 | ColumnmpsSubscriberNumberCompositePrefixNumber | read-write | obsolete | This variable contains the digits of the external DDI prefix number. |
| 1.3.6.1.4.1.272.4.53.4.4.1.3 | ColumnmpsSubscriberNumberCompositePrefixAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.4.5 | TablempsCallThroughTable | not-accessible | current | This table contains the information about call through handling. |
| 1.3.6.1.4.1.272.4.53.4.5.1 | RowmpsCallThroughEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.4.5.1.1 | ColumnmpsCallThroughIndex | read-write | current | A unique value for each call through entry. |
| 1.3.6.1.4.1.272.4.53.4.5.1.2 | ColumnmpsCallThroughInTrunkGroup | read-write | current | A unique value for the incoming trunk group. Reference to mpsTrunkGroupTable. |
| 1.3.6.1.4.1.272.4.53.4.5.1.3 | ColumnmpsCallThroughInNumberIndex | read-write | current | This value index of the incoming external MSN. Reference to mpsTrunkNumberTable. |
| 1.3.6.1.4.1.272.4.53.4.5.1.4 | ColumnmpsCallThroughOutTrunkGroup | read-write | current | A unique value for the outgoing trunk group. Reference to mpsTrunkGroupTable. |
| 1.3.6.1.4.1.272.4.53.4.5.1.5 | ColumnmpsCallThroughOutNumberIndex | read-write | current | This value index of the outgoing external MSN. Reference to mpsTrunkNumberTable. |
| 1.3.6.1.4.1.272.4.53.4.5.1.6 | ColumnmpsCallThroughOutBundle | read-write | current | A unique value for the outgoing bundle. Reference to mpsTrunkBundleTable. |
| 1.3.6.1.4.1.272.4.53.4.5.1.7 | ColumnmpsCallThroughFacilities | read-only | obsolete | Special facilities of the call through entry. clip_sreening : sreen the incoming phone number. ars : use ars (automatic route selection) |
| 1.3.6.1.4.1.272.4.53.4.5.1.8 | ColumnmpsCallThroughAdminStatus | read-write | current | For enable, disable or delete. |
| 1.3.6.1.4.1.272.4.53.4.5.1.9 | ColumnmpsCallThroughOption | read-write | current | This variable contains the authorisation option for the calling party. clipscr -> only CLIP screening pin -> only PIN check clipscrAndPin -> CLIP screening and… |
| 1.3.6.1.4.1.272.4.53.4.5.1.10 | ColumnmpsCallThroughExtension | read-write | current | This variable contains the extension for outgoing call routing. |
| 1.3.6.1.4.1.272.4.53.4.5.1.11 | ColumnmpsCallThroughPIN | read-write | current | This variable contains the PIN code for call through, if set in mpsCallThroughOption. |
| 1.3.6.1.4.1.272.4.53.5 | NodempsGroup | |||
| 1.3.6.1.4.1.272.4.53.5.1 | TablempsGroupTable | not-accessible | current | This table contains the information of the global team parameter for each extension group. |
| 1.3.6.1.4.1.272.4.53.5.1.1 | RowmpsGroupEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.5.1.1.1 | ColumnmpsGroupIndex | read-write | current | A unique value for each group. |
| 1.3.6.1.4.1.272.4.53.5.1.1.2 | ColumnmpsGroupDisplayName | read-write | current | Internal name of the group. |
| 1.3.6.1.4.1.272.4.53.5.1.1.3 | ColumnmpsGroupNumber | read-write | current | This variable contains the extension number of the group. Allowing all group members to be reached at all times for external and internal calls |
| 1.3.6.1.4.1.272.4.53.5.1.1.4 | ColumnmpsGroupNoReplyTimeout | read-write | current | The linear and rotating team calls allow you to configure a time interval in seconds, after which the next member of the team will be called. |
| 1.3.6.1.4.1.272.4.53.5.1.1.5 | ColumnmpsGroupMulticastTrigger | read-write | current | The linear and rotating team calls allow you to configure a time interval in seconds, after which all members of the team will be called in parallel. |
| 1.3.6.1.4.1.272.4.53.5.1.1.6 | ColumnmpsGroupCallForwardingEnable | read-write | current | This value determine if call forwarding of the extension group member will be done(1) or not(2). |
| 1.3.6.1.4.1.272.4.53.5.1.1.7 | ColumnmpsGroupCallCalendar | read-write | current | Select a calendar to switch the call mode automatically. After you have selected a calendar you can set the active call mode. 0 (not active), 1 (day mode), 2 (… |
| 1.3.6.1.4.1.272.4.53.5.1.1.8 | ColumnmpsGroupAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.5.1.1.9 | ColumnmpsGroupCallForwardingExtern | read-write | current | Use 2nd b-channel (false) or call deflection/partial rerouting (true) for call forwarding. |
| 1.3.6.1.4.1.272.4.53.5.1.1.10 | ColumnmpsGroupWrapUpTime | read-write | current | This variable contains the length of timer in seconds for the wrap up time. This timer value is used, if mpsGroupModeOperation is set to 'maxIdle'. |
| 1.3.6.1.4.1.272.4.53.5.1.1.11 | ColumnmpsGroupExtDescription | read-write | current | This value contains an extendend description in order to combine several mpsGroupTable entries in the GUI. |
| 1.3.6.1.4.1.272.4.53.5.1.1.12 | ColumnmpsGroupType | read-write | current | This variable contains the type of this group. The type is used to determine mpsGroupTables for different applications. |
| 1.3.6.1.4.1.272.4.53.5.2 | TablempsGroupModeTable | not-accessible | current | This table contains the information about mode settings of a group. |
| 1.3.6.1.4.1.272.4.53.5.2.1 | RowmpsGroupModeEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.5.2.1.1 | ColumnmpsGroupModeIndex | read-write | current | A unique value for each group |
| 1.3.6.1.4.1.272.4.53.5.2.1.2 | ColumnmpsGroupModeNumber | read-write | current | A unique value for each mode of a group. |
| 1.3.6.1.4.1.272.4.53.5.2.1.3 | ColumnmpsGroupModeOperation | read-write | current | Signalling mode of the group: multicast : all assigned terminals are called simultaneously chainNoRepeat : All assigned terminals are called in the sequence of… |
| 1.3.6.1.4.1.272.4.53.5.2.1.4 | ColumnmpsGroupModeRoutingType | read-write | current | Additonal info for the signalling mode. standard(1) : standard routing, busy check. busyOnBusy(2): check busy conditions -> The whole team is busy, if one team… |
| 1.3.6.1.4.1.272.4.53.5.2.1.5 | ColumnmpsGroupModeCFUEnable | read-write | current | Determines group members are either only extension (false) or an external destination (true). For further implementations this variable is obsolete while group… |
| 1.3.6.1.4.1.272.4.53.5.2.1.6 | ColumnmpsGroupModeCFUTargetNumber | read-write | current | This external number (destiantion) will be called, if mpsGroupModeCFUEnable set to true. For further implementations this variable is not any longer necessary.… |
| 1.3.6.1.4.1.272.4.53.5.2.1.7 | ColumnmpsGroupModeCFUSourceIndex | read-write | current | The charge information will be stored for this extension. |
| 1.3.6.1.4.1.272.4.53.5.2.1.8 | ColumnmpsGroupModeBusyOnBusy | read-write | current | Decides whether additional calls for this team should be signalled or not. This variable contains the threshold for busy signalling. |
| 1.3.6.1.4.1.272.4.53.5.2.1.9 | ColumnmpsGroupModeCFNRTimer | read-write | current | This is the delay until rerouting starts. |
| 1.3.6.1.4.1.272.4.53.5.2.1.10 | ColumnmpsGroupModeCFNRTargetGroup | read-write | current | Group index for rerouting. |
| 1.3.6.1.4.1.272.4.53.5.2.1.11 | ColumnmpsGroupModeAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.5.2.1.12 | ColumnmpsGroupModeAutoCallAccept | read-write | current | If true, every call will be connected immediately with MoH. Selected MoH contains on mpsGroupModeMusicOnHold settings. |
| 1.3.6.1.4.1.272.4.53.5.2.1.13 | ColumnmpsGroupModeMusicOnHold | read-write | current | This variable contains the selected music on hold (MoH) that a party is to hear if mpsGroupModeAutoCallAccept = true. Possible values are: file: variable mpsGr… |
| 1.3.6.1.4.1.272.4.53.5.2.1.14 | ColumnmpsGroupModeReRouteIndex | read-write | current | Index of the ReRouting function in mpsReRouteTable. 0 = ReRouting function deactived. |
| 1.3.6.1.4.1.272.4.53.5.2.1.15 | ColumnmpsGroupModeMOHFileDirectory | read-write | current | Name of directory (on flash medium) which contains file to be used for music on hold. This variable references the entry in mpsWaveFile table where variable mp… |
| 1.3.6.1.4.1.272.4.53.5.2.1.16 | ColumnmpsGroupModeMOHDefaultVariant | read-write | current | This variable specifies the chosen default variant if variable mpsGroupModeMusicOnHold is set to value default. Default value for that variable is 1. |
| 1.3.6.1.4.1.272.4.53.5.3 | TablempsGroupModeChainTable | not-accessible | current | This table contains the extension in each group and Mode. |
| 1.3.6.1.4.1.272.4.53.5.3.1 | RowmpsGroupModeChainEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.5.3.1.1 | ColumnmpsGroupModeChainGroup | read-write | current | A unique value for each group, reference to mpsGroupTable and mpsGroupModeTable. |
| 1.3.6.1.4.1.272.4.53.5.3.1.2 | ColumnmpsGroupModeChainGroupMode | read-write | current | A unique value for each Mode, reference to mpsGroupModeTable (same as mpsGroupModeNumber). |
| 1.3.6.1.4.1.272.4.53.5.3.1.3 | ColumnmpsGroupModeChainPosition | read-write | current | A unique value for each priority. |
| 1.3.6.1.4.1.272.4.53.5.3.1.4 | ColumnmpsGroupModeChainExtension | read-write | current | A unique value for each extension, reference to mpsExtensionTable. For further implementations this variable contains the reference to an mpsExtension entry or… |
| 1.3.6.1.4.1.272.4.53.5.3.1.5 | ColumnmpsGroupModeChainAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.5.3.1.6 | ColumnmpsGroupModeChainExternalNumber | read-write | current | For further implementations in this variable contains external numbers. To show that the mpsGroupModeChainEntry is assigned to an external team member, the mps… |
| 1.3.6.1.4.1.272.4.53.5.4 | TablempsGroupActiveTable | not-accessible | current | This table contains information of logged in or logged out state for each extension in a group. |
| 1.3.6.1.4.1.272.4.53.5.4.1 | RowmpsGroupActiveEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.5.4.1.1 | ColumnmpsGroupActiveGroup | read-write | current | A unique value for each group, reference to mpsGroupTable. |
| 1.3.6.1.4.1.272.4.53.5.4.1.2 | ColumnmpsGroupActiveExtension | read-write | current | A unique value for each extension, reference to mpsExtensionTable. |
| 1.3.6.1.4.1.272.4.53.5.4.1.3 | ColumnmpsGroupActiveFlag | read-write | current | Extension group member is logged in(1) or logged out(2). |
| 1.3.6.1.4.1.272.4.53.5.4.1.4 | ColumnmpsGroupActiveAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.5.5 | TablempsGroupUserTable | not-accessible | current | This table contains the information of the current mode for each group. |
| 1.3.6.1.4.1.272.4.53.5.5.1 | RowmpsGroupUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.5.5.1.1 | ColumnmpsGroupUserIndex | read-write | current | A unique value for each group, reference to mpsGroupTable. |
| 1.3.6.1.4.1.272.4.53.5.5.1.2 | ColumnmpsGroupUserModeNumber | read-write | current | Select the active call mode list, reference to mpsGroupModeTable (same as mpsGroupModeNumber). |
| 1.3.6.1.4.1.272.4.53.5.5.1.3 | ColumnmpsGroupUserAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.5.6 | TablempsGroupStatusTable | not-accessible | current | This table contains status information about groups, used for call-center application. |
| 1.3.6.1.4.1.272.4.53.5.6.1 | RowmpsGroupStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.5.6.1.1 | ColumnmpsGroupStatusIndex | read-write | current | A unique value for each group. |
| 1.3.6.1.4.1.272.4.53.5.6.1.2 | ColumnmpsGroupStatusActiveCalls | read-only | current | This variable contains the number of currently active calls. |
| 1.3.6.1.4.1.272.4.53.5.6.1.3 | ColumnmpsGroupStatusWaitingCalls | read-only | current | This variable contains the number of currently waiting calls. |
| 1.3.6.1.4.1.272.4.53.5.6.1.4 | ColumnmpsGroupStatusSumConnectedCalls | read-only | current | This variable contains the summary of connected calls. |
| 1.3.6.1.4.1.272.4.53.5.6.1.5 | ColumnmpsGroupStatusConnectedCalls | read-only | current | This value is a copy from mpsGroupStatusSumConnectedCall at 0:00h. To get the summary of the connected calls from a day, subtract the the mpsGroupStatusConnect… |
| 1.3.6.1.4.1.272.4.53.5.6.1.6 | ColumnmpsGroupStatusSumLostCalls | read-only | current | This variable contains the summary of lost calls. |
| 1.3.6.1.4.1.272.4.53.5.6.1.7 | ColumnmpsGroupStatusLostCalls | read-only | current | This value is a copy from mpsGroupStatusSumLostCalls at 0:00h. To get the summary of the lost calls from a day, subtract the the mpsGroupStatusLostCalls from m… |
| 1.3.6.1.4.1.272.4.53.6 | NodempsExtension | |||
| 1.3.6.1.4.1.272.4.53.6.1 | TablempsExtensionTable | not-accessible | current | This table contains all internal extensions. |
| 1.3.6.1.4.1.272.4.53.6.1.1 | RowmpsExtensionEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.1.1.1 | ColumnmpsExtensionIndex | read-write | current | A unique value for each internal extension. |
| 1.3.6.1.4.1.272.4.53.6.1.1.2 | ColumnmpsExtensionIfIndex | read-write | obsolete | InterfaceIndex where the extension is placed. |
| 1.3.6.1.4.1.272.4.53.6.1.1.3 | ColumnmpsExtensionDeviceVirtualIndex | read-write | obsolete | This variable contains the virtual device index of the mpsDeviceVirtual table, if the mpsExtensionIfIndex is zero. |
| 1.3.6.1.4.1.272.4.53.6.1.1.4 | ColumnmpsExtensionNumber | read-write | current | This variable contains the internal number for the extension. |
| 1.3.6.1.4.1.272.4.53.6.1.1.5 | ColumnmpsExtensionDisplayName | read-write | current | Internal name of the extension. This name will be displayed as internal calling party. |
| 1.3.6.1.4.1.272.4.53.6.1.1.6 | ColumnmpsExtensionAuthName | read-write | current | Login name for VoIP-registration at the PBX. |
| 1.3.6.1.4.1.272.4.53.6.1.1.7 | ColumnmpsExtensionAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.1.1.8 | ColumnmpsExtensionUser | read-write | current | This variable contains the reference to mpsUserIndex in mpsUserTable. |
| 1.3.6.1.4.1.272.4.53.6.1.1.9 | ColumnmpsExtensionFacStatus | read-only | current | This variable contains the status for this extension. This status is set from call control to handle ccbs or ccnr (barred), room-supervision or temporarily tru… |
| 1.3.6.1.4.1.272.4.53.6.1.1.10 | ColumnmpsExtensionFacilities | read-write | current | Extension facilities. mwi-tone : message waiting indication -> special tone. |
| 1.3.6.1.4.1.272.4.53.6.1.1.11 | ColumnmpsExtensionChargeCounter | read-write | current | This variable contains current total charge counter for this extension. This value is standardized to a thousandth. Update via acctStoreTable. Cleanup this cha… |
| 1.3.6.1.4.1.272.4.53.6.1.1.12 | ColumnmpsExtensionReRouteAppl | read-write | current | Index of ReRouting application in mpsReRouteApplTable. Value 0 means that ReRouting application is inactive. |
| 1.3.6.1.4.1.272.4.53.6.2 | TablempsExtensionAdminTable | not-accessible | current | This table contains extended settings for internal extension. |
| 1.3.6.1.4.1.272.4.53.6.2.1 | RowmpsExtensionAdminEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.2.1.1 | ColumnmpsExtensionAdminIndex | read-write | current | A unique value for each extension. |
| 1.3.6.1.4.1.272.4.53.6.2.1.2 | ColumnmpsExtensionAdminDialAuthorisation | read-write | obsolete | Dialing privileges for a extension specifies what type of calls (internal, external, etc. ) this extension can place. Default is international. |
| 1.3.6.1.4.1.272.4.53.6.2.1.3 | ColumnmpsExtensionAdminFacilities | read-write | current | Special facilities of the extension. suppress-A-Addr: Suppress outgoing CLIP information (CLIR). suppress-B-Addr: This value determines if supression number of… |
| 1.3.6.1.4.1.272.4.53.6.2.1.4 | ColumnmpsExtensionAdminPickupGroup | read-write | obsolete | Enter the number of the group in which calls are to be taken. |
| 1.3.6.1.4.1.272.4.53.6.2.1.5 | ColumnmpsExtensionAdminPhonebookAccess | read-write | obsolete | This value determine the access to the PBX phonebook. |
| 1.3.6.1.4.1.272.4.53.6.2.1.6 | ColumnmpsExtensionAdminMusicOnHold | read-write | obsolete | This variable contains the selected music on hold (MoH) that a party is to hear that has been transferred by the selected internal subscriber. |
| 1.3.6.1.4.1.272.4.53.6.2.1.7 | ColumnmpsExtensionAdminAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.2.1.8 | ColumnmpsExtensionAdminCalendar | read-write | current | Select a calendar index to switch the call distribution for rerouting via calendar. |
| 1.3.6.1.4.1.272.4.53.6.2.1.9 | ColumnmpsExtensionAdminWrapUpTime | read-write | current | This variable contains the length of timer in seconds for the wrap up time. This timer value is used, if mpsGroupModeOperation is set to 'callcenter'. |
| 1.3.6.1.4.1.272.4.53.6.3 | TablempsExtensionUserTable | not-accessible | current | This table contains extended settings for internal extensions. |
| 1.3.6.1.4.1.272.4.53.6.3.1 | RowmpsExtensionUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.3.1.1 | ColumnmpsExtensionUserIndex | read-write | current | This variable references the mpsExtensionIndex. |
| 1.3.6.1.4.1.272.4.53.6.3.1.2 | ColumnmpsExtensionUserAuthPassword | read-write | current | Password for VoIP-registration at the PBX. |
| 1.3.6.1.4.1.272.4.53.6.3.1.3 | ColumnmpsExtensionUserChargeLimit | read-write | current | This variable contains the maximum amounts available for calling. |
| 1.3.6.1.4.1.272.4.53.6.3.1.4 | ColumnmpsExtensionUserDirectCall | read-write | current | This variable contains the index of the DirectCallTable. 0 = disabled. |
| 1.3.6.1.4.1.272.4.53.6.3.1.5 | ColumnmpsExtensionUserFacilities | read-write | current | Special facilities of the extension. charge-limit: This value determines if the maximum amounts available for calling is enabled. call-waiting: Call waiting si… |
| 1.3.6.1.4.1.272.4.53.6.3.1.6 | ColumnmpsExtensionUserAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.3.1.7 | ColumnmpsExtensionUserUserMode | read-write | current | This variable contains the actual mode for the incoming call distribution to a reroute function. |
| 1.3.6.1.4.1.272.4.53.6.4 | TablempsExtensionSourceTable | not-accessible | current | This table contains the outgoing CLIP information for each subscriber, that will be displayed to the public exchange for external outgoing calls. |
| 1.3.6.1.4.1.272.4.53.6.4.1 | RowmpsExtensionSourceEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.4.1.1 | ColumnmpsExtensionSourceExtension | read-write | current | This variable references the mpsExtensionIndex. |
| 1.3.6.1.4.1.272.4.53.6.4.1.2 | ColumnmpsExtensionSourceTrunkGroup | read-write | current | This variable references the mpsTrunkGroupIndex. |
| 1.3.6.1.4.1.272.4.53.6.4.1.3 | ColumnmpsExtensionSourceSubscriberNumber | read-write | obsolete | A unique value for each extension and outgoing external number. |
| 1.3.6.1.4.1.272.4.53.6.4.1.4 | ColumnmpsExtensionSourceSubscriberAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.4.1.5 | ColumnmpsExtensionSourceTrunkNumber | read-write | current | A unique value for each extension and outgoing external number. Index in mpsTrunkNumberTable |
| 1.3.6.1.4.1.272.4.53.6.4.1.6 | ColumnmpsExtensionSourceHideNumber | read-write | current | Always hide this number on outgoing calls from this subscriber. |
| 1.3.6.1.4.1.272.4.53.6.4.1.7 | ColumnmpsExtensionSourceType | read-write | current | This variable contains the actual number signaling type. standard: standard number signaling -> use the number which is indexed via the mpsExtensionSourceTrunk… |
| 1.3.6.1.4.1.272.4.53.6.4.1.8 | ColumnmpsExtensionSourcePrio | read-write | current | Priority of the outgoing trunk number. Used to set the outgoing trunk line sequence individually for each extension (instead of globally via the ClassOfService… |
| 1.3.6.1.4.1.272.4.53.6.5 | TablempsExtensionABTable | not-accessible | current | This table contains the additional information of the analog extension. |
| 1.3.6.1.4.1.272.4.53.6.5.1 | RowmpsExtensionABEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.6.5.1.1 | ColumnmpsExtensionABIndex | read-write | obsolete | A unique value for additional analog extension settings. |
| 1.3.6.1.4.1.272.4.53.6.5.1.2 | ColumnmpsExtensionABMode | read-write | obsolete | You can configure each analog port to accept a different terminal device. Additional settings or special functions may be required depending on the type of ter… |
| 1.3.6.1.4.1.272.4.53.6.5.1.3 | ColumnmpsExtensionABGatewayNumber | read-write | obsolete | This variable contains the gateway number, if mpsExtensionABMode=gateway. |
| 1.3.6.1.4.1.272.4.53.6.5.1.4 | ColumnmpsExtensionABDialingType | read-write | obsolete | Type of dialling, DTMF and pulse dialing. |
| 1.3.6.1.4.1.272.4.53.6.5.1.5 | ColumnmpsExtensionABChargePulse | read-write | obsolete | If your analog terminal devices support the display of cost and charge information you can set the transmission of charge pulses at the corresponding connectio… |
| 1.3.6.1.4.1.272.4.53.6.5.1.6 | ColumnmpsExtensionABClip | read-write | obsolete | Number display (CLIP). |
| 1.3.6.1.4.1.272.4.53.6.5.1.7 | ColumnmpsExtensionABClipOffHook | read-write | obsolete | Number display (CLIP off Hook). |
| 1.3.6.1.4.1.272.4.53.6.5.1.8 | ColumnmpsExtensionABCnip | read-write | obsolete | Name display (CNIP). |
| 1.3.6.1.4.1.272.4.53.6.5.1.9 | ColumnmpsExtensionABFlashTime | read-write | obsolete | This variable contains the analogue flash time in milliseconds. |
| 1.3.6.1.4.1.272.4.53.6.5.1.10 | ColumnmpsExtensionABDoorIntercom | read-write | obsolete | This variable contains the number of the door intercom. |
| 1.3.6.1.4.1.272.4.53.6.5.1.11 | ColumnmpsExtensionABDoorIntercomTimer | read-write | obsolete | This variable contains the length of timer in seconds for open door. |
| 1.3.6.1.4.1.272.4.53.6.5.1.12 | ColumnmpsExtensionABAdminStatus | read-write | obsolete | Jsut for delete. |
| 1.3.6.1.4.1.272.4.53.6.6 | TablempsExtensionVoIPTable | not-accessible | current | This table contains additional information for VoIP extension. |
| 1.3.6.1.4.1.272.4.53.6.6.1 | RowmpsExtensionVoIPEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.6.1.1 | ColumnmpsExtensionVoIPIndex | read-write | current | This variable references the mpsExtensionIndex. |
| 1.3.6.1.4.1.272.4.53.6.6.1.2 | ColumnmpsExtensionVoIPLocation | read-write | obsolete | This variable contains the registration location area from which the subscriber is able to setup an VoIP-register. |
| 1.3.6.1.4.1.272.4.53.6.6.1.3 | ColumnmpsExtensionVoIPNetwork | read-write | obsolete | If mpsSubsRegistrationLocation = network (6), this value contains the special location index. |
| 1.3.6.1.4.1.272.4.53.6.6.1.4 | ColumnmpsExtensionVoIPAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.6.1.5 | ColumnmpsExtensionVoIPAdminBinding | read-write | current | This variable contains name, port and transport of a statically registered client. example: 192.0.0.1:5060;tcp or phone30.bintec.de:5060;upd Data will be used,… |
| 1.3.6.1.4.1.272.4.53.6.6.1.6 | ColumnmpsExtensionVoIPFacilities | read-write | current | Special facilities of the IP client. static: establish client with fix IP and port, no register possible. g726coding: 0 -> I.366 1 -> RFC 3551/X.420 no-auto-ho… |
| 1.3.6.1.4.1.272.4.53.6.6.1.7 | ColumnmpsExtensionVoIPIpAddressInfo | read-only | current | This variable contains the IP Address of the dynamically registered client, to show info in UI. |
| 1.3.6.1.4.1.272.4.53.6.6.1.8 | ColumnmpsExtensionVoIPOperationBinding | read-only | current | This variable contains name:port of the registered client, to show info in UI. |
| 1.3.6.1.4.1.272.4.53.6.6.1.9 | ColumnmpsExtensionVoIPOperationStatus | read-only | current | This variable contains the actual operation status. notregistered : client is not registered registering : notregistered, registration pending registered : cli… |
| 1.3.6.1.4.1.272.4.53.6.6.1.10 | ColumnmpsExtensionVoIPCurrentCalls | read-only | obsolete | This variable contains the current calls. |
| 1.3.6.1.4.1.272.4.53.6.6.1.11 | ColumnmpsExtensionVoIPCodecs | read-write | obsolete | For codecs, supported for this extension: ulaw (1) alaw (2) g729 (4) g726 (8) g726_16 (16) g726_32 (32) g726_40 (64) g728 (128) g723_63 (256) g723_53 (512) g72… |
| 1.3.6.1.4.1.272.4.53.6.6.1.12 | ColumnmpsExtensionVoIPCodecOrder | read-write | obsolete | Sorting the codecs default -> system default order quality -> highest quality first lowest -> lowest bandwith first highest -> highest bandwith first |
| 1.3.6.1.4.1.272.4.53.6.6.1.13 | ColumnmpsExtensionVoIPCodecProperties | read-write | current | A reference to mpsCodecPropertyTable for codec properties. 0 = use system default. |
| 1.3.6.1.4.1.272.4.53.6.7 | TablempsExtensionTrunkRouteTable | not-accessible | current | This table contains information, if an internal extension is to use only certain bundles for external connections. multiple entries can exists for each extensi… |
| 1.3.6.1.4.1.272.4.53.6.7.1 | RowmpsExtensionTrunkRouteEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.6.7.1.1 | ColumnmpsExtensionTrunkRouteIndex | read-write | obsolete | A unique value for each extension. |
| 1.3.6.1.4.1.272.4.53.6.7.1.2 | ColumnmpsExtensionTrunkRouteNumber | read-write | obsolete | Priority of the bundle. |
| 1.3.6.1.4.1.272.4.53.6.7.1.3 | ColumnmpsExtensionTrunkRouteBundle | read-write | obsolete | This value contain the bundle number. |
| 1.3.6.1.4.1.272.4.53.6.7.1.4 | ColumnmpsExtensionTrunkRouteAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.8 | TablempsExtensionTrunkAccessTable | not-accessible | current | This table contains information, if the direct access to the bundle from this extension is allowed or not. |
| 1.3.6.1.4.1.272.4.53.6.8.1 | RowmpsExtensionTrunkAccessEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.6.8.1.1 | ColumnmpsExtensionTrunkAccessIndex | read-write | obsolete | A unique value for each extension. |
| 1.3.6.1.4.1.272.4.53.6.8.1.2 | ColumnmpsExtensionTrunkAccessBundle | read-write | obsolete | This value contain the bundle number. |
| 1.3.6.1.4.1.272.4.53.6.8.1.3 | ColumnmpsExtensionTrunkAccessGrant | read-write | obsolete | This value determine whether the direct access to the bundle number is allowed(1) or not allowed(2). |
| 1.3.6.1.4.1.272.4.53.6.8.1.4 | ColumnmpsExtensionTrunkAccessAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.9 | TablempsExtensionDiversionTable | not-accessible | current | This table contains the configured diversions. |
| 1.3.6.1.4.1.272.4.53.6.9.1 | RowmpsExtensionDiversionEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.9.1.1 | ColumnmpsExtensionDiversionIndex | read-write | current | A unique value for the extension, who has configured this diversion. |
| 1.3.6.1.4.1.272.4.53.6.9.1.2 | ColumnmpsExtensionDiversionService | read-write | current | Diversion for a special service. |
| 1.3.6.1.4.1.272.4.53.6.9.1.3 | ColumnmpsExtensionDiversionCFU | read-write | current | Destination number for call forwarding unconditional. |
| 1.3.6.1.4.1.272.4.53.6.9.1.4 | ColumnmpsExtensionDiversionCFB | read-write | current | Destination number for call forwarding busy. |
| 1.3.6.1.4.1.272.4.53.6.9.1.5 | ColumnmpsExtensionDiversionCFNR | read-write | current | Destination number for call forwarding no reply. |
| 1.3.6.1.4.1.272.4.53.6.9.1.6 | ColumnmpsExtensionDiversionCFU2 | read-write | current | This variable contains the diversion target number for call deflection. |
| 1.3.6.1.4.1.272.4.53.6.9.1.7 | ColumnmpsExtensionDiversionCFU3 | read-write | current | This variable contains the diversion target number for follow me. |
| 1.3.6.1.4.1.272.4.53.6.9.1.8 | ColumnmpsExtensionDiversionCFU3Fixed | read-write | current | This value determines whether the follow me diversion (CFU3) is fixed(1) or variable(2). |
| 1.3.6.1.4.1.272.4.53.6.9.1.9 | ColumnmpsExtensionDiversionCFU3Active | read-write | current | This value determines whether the follow me diversion (CFU3) is active(1) or not active(2). |
| 1.3.6.1.4.1.272.4.53.6.9.1.10 | ColumnmpsExtensionDiversionAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.10 | TablempsExtensionCAPITable | not-accessible | current | This table contains the additional information of the CAPI extension. |
| 1.3.6.1.4.1.272.4.53.6.10.1 | RowmpsExtensionCAPIEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.10.1.1 | ColumnmpsExtensionCAPIIndex | read-write | current | A unique value for additional CAPI extension settings. |
| 1.3.6.1.4.1.272.4.53.6.10.1.2 | ColumnmpsExtensionCAPIWakeOnLan | read-write | current | This value determine if Wake On LAN is off or on. Set to delete, to discard the whole entry. |
| 1.3.6.1.4.1.272.4.53.6.10.1.3 | ColumnmpsExtensionCAPIMacAddress | read-write | current | This variable contains the MAC address of the capi extension. |
| 1.3.6.1.4.1.272.4.53.6.11 | TablempsCAPIClientTable | not-accessible | current | This table contains all registered CAPI clients. |
| 1.3.6.1.4.1.272.4.53.6.11.1 | RowmpsCAPIClientEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.11.1.1 | ColumnmpsCAPIClientIndex | read-only | current | A unique value for each registerd CAPI client. |
| 1.3.6.1.4.1.272.4.53.6.11.1.2 | ColumnmpsCAPIClientIP | read-only | current | This variable contains the IP Address of the registered CAPI Client. |
| 1.3.6.1.4.1.272.4.53.6.11.1.3 | ColumnmpsCAPIClientMac | read-only | current | This variable contains the MAC address of the registered CAPI Client. |
| 1.3.6.1.4.1.272.4.53.6.11.1.4 | ColumnmpsCAPIClientName | read-only | current | Name (DHCP/NETBIOS) of the registered CAPI Client. |
| 1.3.6.1.4.1.272.4.53.6.11.1.5 | ColumnmpsCAPIClientAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.12 | TablempsExtensionModeTable | not-accessible | current | This table contains the detailed information about extension modes. |
| 1.3.6.1.4.1.272.4.53.6.12.1 | RowmpsExtensionModeEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.12.1.1 | ColumnmpsExtensionModeIndex | read-write | current | A unique value for each mode for extension. |
| 1.3.6.1.4.1.272.4.53.6.12.1.2 | ColumnmpsExtensionModeExtIndex | read-write | current | Reference to the extension for this mode entry. |
| 1.3.6.1.4.1.272.4.53.6.12.1.3 | ColumnmpsExtensionModeMode | read-write | current | For each extension index can exist several mode entries. (One entry for each mode.) |
| 1.3.6.1.4.1.272.4.53.6.12.1.4 | ColumnmpsExtensionModeReRouteIndex | read-write | current | Index of the ReRouting function in mpsReRouteTable. 0 = ReRouting function inactive. |
| 1.3.6.1.4.1.272.4.53.6.12.1.5 | ColumnmpsExtensionModeAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.13 | TablempsClassOfServiceTable | not-accessible | current | This table contains the class of service settings. |
| 1.3.6.1.4.1.272.4.53.6.13.1 | RowmpsClassOfServiceEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.13.1.1 | ColumnmpsCoSIndex | read-write | current | A unique value for each class of service. |
| 1.3.6.1.4.1.272.4.53.6.13.1.2 | ColumnmpsCoSDescription | read-write | current | This variable contains the name of the class of service. |
| 1.3.6.1.4.1.272.4.53.6.13.1.3 | ColumnmpsCoSDialAuthorisation | read-write | current | Dialing privileges for a extension specifies what type of calls (internal, external, etc. ) this extension can place. Default is international. 'unknown' = no … |
| 1.3.6.1.4.1.272.4.53.6.13.1.4 | ColumnmpsCoSFacilities | read-write | current | Special facilities of the class of service. auto-trunk-req : This setting defines whether automatic access to an outside line is to be configured. man-trunk-gr… |
| 1.3.6.1.4.1.272.4.53.6.13.1.5 | ColumnmpsCoSPickupGroup | read-write | current | This variable contains the pickup group. Only extension with the same pickup group can pickup a call from another extension. |
| 1.3.6.1.4.1.272.4.53.6.13.1.6 | ColumnmpsCoSFeatureGroup | read-write | current | This variable contains the feature group. |
| 1.3.6.1.4.1.272.4.53.6.13.1.7 | ColumnmpsCoSPhonebookAccess | read-write | current | Phonebook access to the global PBX phonebook. dial-authorisation: Access the global phonebook to restrictions resulting from entries in the mpsBlacklistNumberT… |
| 1.3.6.1.4.1.272.4.53.6.13.1.8 | ColumnmpsCoSMusicOnHold | read-write | current | This variable contains the file/tone the remote is provided with, when call is held. Possible values are: file: variable mpsCoSMOHFileDirectory specifies direc… |
| 1.3.6.1.4.1.272.4.53.6.13.1.9 | ColumnmpsCoSAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.13.1.10 | ColumnmpsCoSTrunkBundleAccess | read-write | current | This variable contains a bit field that allows to selectively enable/disable manual trunk group selection. |
| 1.3.6.1.4.1.272.4.53.6.13.1.11 | ColumnmpsCoSMOHFileDirectory | read-write | current | Name of directory (on flash medium) which contains file to be used for music on hold. This variable references the entry in mpsWaveFile table where variable mp… |
| 1.3.6.1.4.1.272.4.53.6.13.1.12 | ColumnmpsCoSMOHDefaultVariant | read-write | current | This variable specifies the chosen default variant if variable mpsCoSMusicOnHold is set to value default. Default value for that variable is 1. |
| 1.3.6.1.4.1.272.4.53.6.13.1.13 | ColumnmpsCoSTrunkCallDisplay | read-write | current | Defines how an external trunk call shall be displayed on Systemphones: trunk-and-number-name(1): Show descriptions of mpsTrunkGroupTable and mpsTrunkNumberTabl… |
| 1.3.6.1.4.1.272.4.53.6.13.1.14 | ColumnmpsCoSSwitchContacts | read-write | current | Defines which relay contact(s) may be switched by telephone (access) dial codes. The bit position corresponds to the SwitchingContactIndex. |
| 1.3.6.1.4.1.272.4.53.6.14 | TablempsUserTable | not-accessible | current | This table contains the information about users. |
| 1.3.6.1.4.1.272.4.53.6.14.1 | RowmpsUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.14.1.1 | ColumnmpsUserIndex | read-write | current | A unique value for each user. |
| 1.3.6.1.4.1.272.4.53.6.14.1.2 | ColumnmpsUserName | read-write | current | This variable contains the name of the user. |
| 1.3.6.1.4.1.272.4.53.6.14.1.3 | ColumnmpsUserDescription | read-write | current | This variable contains additional description for the user. e.g. 'Hotline' or 'R&D'. |
| 1.3.6.1.4.1.272.4.53.6.14.1.4 | ColumnmpsUserLoginUser | read-write | current | This variable contains the login user string, referencing variable biboAdmLoginUser in biboAdmLoginTable. This string will be used in mpsExtensionLoginUser, to… |
| 1.3.6.1.4.1.272.4.53.6.14.1.5 | ColumnmpsUserMobileNumber | read-write | current | This variable contains the user's mobile number. |
| 1.3.6.1.4.1.272.4.53.6.14.1.6 | ColumnmpsUserHomeNumber | read-write | current | This variable contains the user's home number. |
| 1.3.6.1.4.1.272.4.53.6.14.1.7 | ColumnmpsUserMailAddress | read-write | current | This variable contains the user's mail address. |
| 1.3.6.1.4.1.272.4.53.6.14.1.8 | ColumnmpsUserFacilities | read-write | current | user facilities. showMobilNumInPhonebook: Select whether this number is shown during system phonebook acces. showHomeNumInPhonebook: Select whether this number… |
| 1.3.6.1.4.1.272.4.53.6.14.1.9 | ColumnmpsUserCallThroughOutExtIndex | read-write | current | This variable contains the extension index for outgoing call routing, if mpsUserFacilities callThrough option is enabled. Otherwise this value is unused. |
| 1.3.6.1.4.1.272.4.53.6.14.1.10 | ColumnmpsUserStandardCoS | read-write | current | This variable contains the index of the standard class of service referencing mpsCoSIndex in mpsClassOfServiceTable. |
| 1.3.6.1.4.1.272.4.53.6.14.1.11 | ColumnmpsUserOptionalCoS | read-write | current | This variable contains the index of the optional class of service referencing to mpsCoSIndex in mpsClassOfServiceTable. |
| 1.3.6.1.4.1.272.4.53.6.14.1.12 | ColumnmpsUserNightCoS | read-write | current | This variable contains the index of the night class of service referencing to mpsCoSIndex in mpsClassOfServiceTable. |
| 1.3.6.1.4.1.272.4.53.6.14.1.13 | ColumnmpsUserAuthPassword | read-write | current | This variable contains authorisation password used for VoIP client registration. |
| 1.3.6.1.4.1.272.4.53.6.14.1.14 | ColumnmpsUserAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.15 | TablempsCoSTrunkRouteTable | not-accessible | current | This table contains information about the call routing oder for calls to external destination for the referenced class of service. |
| 1.3.6.1.4.1.272.4.53.6.15.1 | RowmpsCoSTrunkRouteEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.15.1.1 | ColumnmpsCoSTrunkRouteIndex | read-write | current | A unique value for each trunk route entry. |
| 1.3.6.1.4.1.272.4.53.6.15.1.2 | ColumnmpsCoSTrunkRouteCoS | read-write | current | This variable contains the class of service index for this trunk route entry. Reference to mpsCoSIndex in mpsClassOfServiceTable. |
| 1.3.6.1.4.1.272.4.53.6.15.1.3 | ColumnmpsCoSTrunkRoutePrio | read-write | current | Priority of the trunk route entry. |
| 1.3.6.1.4.1.272.4.53.6.15.1.4 | ColumnmpsCoSTrunkRouteTrunkGroup | read-write | current | This variable contains the trunk group index (mpsTrukGroupIndex). |
| 1.3.6.1.4.1.272.4.53.6.15.1.5 | ColumnmpsCoSTrunkRouteAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.16 | TablempsParallelRingingTable | not-accessible | current | This table contains information about parallel ringing feature. If the extension is called an additional parallel call we be initiated. |
| 1.3.6.1.4.1.272.4.53.6.16.1 | RowmpsParallelRingingEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.16.1.1 | ColumnmpsPRIndex | read-write | current | A unique value for each parallel ringing entry. |
| 1.3.6.1.4.1.272.4.53.6.16.1.2 | ColumnmpsPRExtension | read-write | current | This variable contains the extension for this parallel ringing entry. Reference to mpsExtensionIndex in mpsExtensionTable. |
| 1.3.6.1.4.1.272.4.53.6.16.1.3 | ColumnmpsPRFacilities | read-write | current | mpsPRFacilities: This value decides which number will be used for the parallel call: pr-number: the configured number (mpsPRNumber) mobile-number: the mobile n… |
| 1.3.6.1.4.1.272.4.53.6.16.1.4 | ColumnmpsPRNumber | read-write | current | This variable contains the digits of the parallel ringing number. |
| 1.3.6.1.4.1.272.4.53.6.16.1.5 | ColumnmpsPRAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.17 | TablempsExtensionStatusTable | not-accessible | current | This table contains status information about each extension logged-in in a call-center group (mpsGroupTable). |
| 1.3.6.1.4.1.272.4.53.6.17.1 | RowmpsExtensionStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.17.1.1 | ColumnmpsExtensionStatusIndex | read-only | current | A unique value for each extension. |
| 1.3.6.1.4.1.272.4.53.6.17.1.2 | ColumnmpsExtensionStatusEndOfWrapUpTime | read-only | current | This variable contains the end or wrap-up time for this extension, after termination of an incoming call for mpsGroupModeOperation_call_center. |
| 1.3.6.1.4.1.272.4.53.6.17.1.3 | ColumnmpsExtensionStatusConnectionStatus | read-only | current | This variable contains the connection status. |
| 1.3.6.1.4.1.272.4.53.6.17.1.4 | ColumnmpsExtensionStatusSumConnectedCalls | read-only | current | This variable contains the summary of connected calls since system start. |
| 1.3.6.1.4.1.272.4.53.6.17.1.5 | ColumnmpsExtensionStatusConnectedCalls | read-only | current | This value is a copy from mpsExtensionStatusSumConnectedCalls at 0:00h. To get the summary of the connected calls from a day, subtract the mpsExtensionStatusCo… |
| 1.3.6.1.4.1.272.4.53.6.17.1.6 | ColumnmpsExtensionStatusSumConnectionTime | read-only | current | This variable contains the summary of time of the connected calls. |
| 1.3.6.1.4.1.272.4.53.6.17.1.7 | ColumnmpsExtensionStatusConnectionTime | read-only | current | This value is a copy from mpsExtensionStatusSumConnnectionTime at 0:00h. To get the summary of time of the connected calls from a day, subtract the mpsExtensio… |
| 1.3.6.1.4.1.272.4.53.6.18 | TablempsUserUserTable | not-accessible | current | This table contains additional information for the user. |
| 1.3.6.1.4.1.272.4.53.6.18.1 | RowmpsUserUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.6.18.1.1 | ColumnmpsUserUserIndex | read-write | current | A unique value for each user, referencing to mpsUserIndex in mpsUserTable. |
| 1.3.6.1.4.1.272.4.53.6.18.1.2 | ColumnmpsUserUserPin | read-write | current | This variable contains authorization PIN for telephone procedures. 'none' = inactive (can not be dialed). |
| 1.3.6.1.4.1.272.4.53.6.18.1.3 | ColumnmpsUserUserAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.6.18.1.4 | ColumnmpsUserUserFacilities | read-write | current | user facilities. userBusyOnBusy: if set, all incoming calls for this user are rejected with user busy, if at least one number of this user is busy. |
| 1.3.6.1.4.1.272.4.53.7 | NodempsDoorIntercom | |||
| 1.3.6.1.4.1.272.4.53.7.1 | TablempsDoorIntercomTable | not-accessible | current | This table contains the global information about door intercoms. |
| 1.3.6.1.4.1.272.4.53.7.1.1 | RowmpsDoorIntercomEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.7.1.1.1 | ColumnmpsDoorIntercomIndex | read-write | current | A unique value for each door intercom. |
| 1.3.6.1.4.1.272.4.53.7.1.1.2 | ColumnmpsDoorIntercomConnectDTMF | read-write | current | Doorline adapter keycode for call acception. |
| 1.3.6.1.4.1.272.4.53.7.1.1.3 | ColumnmpsDoorIntercomAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.7.2 | TablempsDoorIntercomSourceTable | not-accessible | current | This table contains the global information for each button of a door intercom. |
| 1.3.6.1.4.1.272.4.53.7.2.1 | RowmpsDoorIntercomSourceEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.7.2.1.1 | ColumnmpsDoorIntercomSourceIndex | read-write | current | A unique value for each door intercom. Reference to mpsDoorIntercomIndex. |
| 1.3.6.1.4.1.272.4.53.7.2.1.2 | ColumnmpsDoorIntercomSourceButton | read-write | current | A unique value for each button of a door intercom. |
| 1.3.6.1.4.1.272.4.53.7.2.1.3 | ColumnmpsDoorIntercomSourceSetupDTMF | read-write | current | A unique value for each door intercom and bell button. |
| 1.3.6.1.4.1.272.4.53.7.2.1.4 | ColumnmpsDoorIntercomSourceForwardingTime | read-write | current | The linear and rotating doorline team calls allow you to configure a time interval in seconds, after which the next member of the doorline team will be called. |
| 1.3.6.1.4.1.272.4.53.7.2.1.5 | ColumnmpsDoorIntercomSourceParallelTime | read-write | current | The linear and rotating doorline team calls allow you to configure a time interval in seconds, after which all members of the doorline team will be called at t… |
| 1.3.6.1.4.1.272.4.53.7.2.1.6 | ColumnmpsDoorIntercomSourceAlertingTimeout | read-write | current | The doorline team calls allow you to configure a time interval in seconds, how long the whole team will be called. |
| 1.3.6.1.4.1.272.4.53.7.2.1.7 | ColumnmpsDoorIntercomSourceCalendar | read-write | current | Select a calendar to switch the call mode automatically. After you have selected a calendar you can set the active call mode. 0 (not active), 1 (day mode), 2 (… |
| 1.3.6.1.4.1.272.4.53.7.2.1.8 | ColumnmpsDoorIntercomSourceAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.7.2.1.9 | ColumnmpsDoorIntercomSourceDescr | read-write | current | Name of the button. |
| 1.3.6.1.4.1.272.4.53.7.3 | TablempsDoorIntercomUserTable | not-accessible | current | This table contains the mode information for each button of a door intercom. |
| 1.3.6.1.4.1.272.4.53.7.3.1 | RowmpsDoorIntercomUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.7.3.1.1 | ColumnmpsDoorIntercomUserIndex | read-write | current | A unique value for each door intercom. Reference to mpsDoorIntercomIndex. |
| 1.3.6.1.4.1.272.4.53.7.3.1.2 | ColumnmpsDoorIntercomUserButton | read-write | current | A reference to mpsDoorIntercomSourceButton. |
| 1.3.6.1.4.1.272.4.53.7.3.1.3 | ColumnmpsDoorIntercomUserMode | read-write | current | Select the active call mode. |
| 1.3.6.1.4.1.272.4.53.7.3.1.4 | ColumnmpsDoorIntercomUserAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.7.4 | TablempsDoorIntercomModeTable | not-accessible | current | This table contains information about door intercom and mode. |
| 1.3.6.1.4.1.272.4.53.7.4.1 | RowmpsDoorIntercomModeEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.7.4.1.1 | ColumnmpsDoorIntercomModeIndex | read-write | current | A unique value for each door intercom. Reference to mpsDoorIntercomIndex. |
| 1.3.6.1.4.1.272.4.53.7.4.1.2 | ColumnmpsDoorIntercomModeButton | read-write | current | A unique value for each button of a door intercom. Reference to mpsDoorIntercomSourceButtonIndex. |
| 1.3.6.1.4.1.272.4.53.7.4.1.3 | ColumnmpsDoorIntercomModeNumber | read-write | current | For each door intercom a variant. Reference to mpsDoorIntercomUserMode. |
| 1.3.6.1.4.1.272.4.53.7.4.1.4 | ColumnmpsDoorIntercomModeHandling | read-write | current | Signalling mode (internal) of the door intercom group: simultaneous: all assigned terminals are called simultaneously linear : all assigned terminals are calle… |
| 1.3.6.1.4.1.272.4.53.7.4.1.5 | ColumnmpsDoorIntercomModeAssignment | read-write | current | Door intercom group member are internal or one external number. |
| 1.3.6.1.4.1.272.4.53.7.4.1.6 | ColumnmpsDoorIntercomModeExtNumber | read-write | current | This external number will be called, if mpsDoorIntercomModeAssignment = external. |
| 1.3.6.1.4.1.272.4.53.7.4.1.7 | ColumnmpsDoorIntercomModeAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.7.5 | TablempsDoorIntercomModeChainTable | not-accessible | current | This table contains the extension of each door intercom group and variant. |
| 1.3.6.1.4.1.272.4.53.7.5.1 | RowmpsDoorIntercomModeChainEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.7.5.1.1 | ColumnmpsDoorIntercomModeChainIndex | read-write | current | A unique value for each door intercom. Reference to mpsDoorIntercomIndex. |
| 1.3.6.1.4.1.272.4.53.7.5.1.2 | ColumnmpsDoorIntercomModeChainButton | read-write | current | A unique value for each door intercom. Reference to mpsDoorIntercomSourceButtonIndex. |
| 1.3.6.1.4.1.272.4.53.7.5.1.3 | ColumnmpsDoorIntercomModeChainNumber | read-write | current | For each door intercom a variant. Reference to mpsDoorIntercomUserMode. |
| 1.3.6.1.4.1.272.4.53.7.5.1.4 | ColumnmpsDoorIntercomModeChainPosition | read-write | current | This value determine the order of the called extensions. |
| 1.3.6.1.4.1.272.4.53.7.5.1.5 | ColumnmpsDoorIntercomModeChainExtension | read-write | current | A unique value for each extension in the door intercom group variant. Reference to mpsExtensionIndex in mpsExtensionTable. |
| 1.3.6.1.4.1.272.4.53.7.5.1.6 | ColumnmpsDoorIntercomModeChainAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.8 | NodempsVoIP | |||
| 1.3.6.1.4.1.272.4.53.8.1 | TablempsNetworkTable | not-accessible | current | This table contains information for each IP location. Every VoIP extension and VoIP provider will be associate to an IP location. |
| 1.3.6.1.4.1.272.4.53.8.1.1 | RowmpsNetworkEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.272.4.53.8.1.1.1 | ColumnmpsNetworkIndex | read-write | obsolete | A unique value for each location. |
| 1.3.6.1.4.1.272.4.53.8.1.1.2 | ColumnmpsNetworkRegTimer | read-write | obsolete | Registration timer in seconds for IP extension. Set to 0 to get the time from the terminal. |
| 1.3.6.1.4.1.272.4.53.8.1.1.3 | ColumnmpsNetworkBwUpstream | read-write | obsolete | Bandwidth for upstream data in kBits/s. |
| 1.3.6.1.4.1.272.4.53.8.1.1.4 | ColumnmpsNetworkBwDownstream | read-write | obsolete | Bandwidth for downstream data in kBits/s. |
| 1.3.6.1.4.1.272.4.53.8.1.1.5 | ColumnmpsNetworkAddress | read-write | obsolete | IP Address of the location. |
| 1.3.6.1.4.1.272.4.53.8.1.1.6 | ColumnmpsNetworkNetMask | read-write | obsolete | Subnet mask. |
| 1.3.6.1.4.1.272.4.53.8.1.1.7 | ColumnmpsNetworkDescr | read-write | obsolete | Name of the location. |
| 1.3.6.1.4.1.272.4.53.8.1.1.8 | ColumnmpsNetworkDomain | read-write | obsolete | DNS name of the location. |
| 1.3.6.1.4.1.272.4.53.8.1.1.9 | ColumnmpsNetworkRTPTrafficReservation | read-write | obsolete | Maximum RTP Traffic in percent. |
| 1.3.6.1.4.1.272.4.53.8.1.1.10 | ColumnmpsNetworkAdminStatus | read-write | obsolete | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.8.1.1.11 | ColumnmpsNetworkIfIndex | read-write | obsolete | Index of network interface from ifTable to apply the bandwidth settings. If the default value has been set, the entry is manually configured by the user otherw… |
| 1.3.6.1.4.1.272.4.53.8.2 | TablempsCodecPropertyTable | not-accessible | current | This table contains information about codec properties referred by extensions and providers. |
| 1.3.6.1.4.1.272.4.53.8.2.1 | RowmpsCodecPropertyEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.8.2.1.1 | ColumnmpsCodecPropertyIndex | read-write | current | A unique value for each codec list. |
| 1.3.6.1.4.1.272.4.53.8.2.1.2 | ColumnmpsCodecPropertyDescr | read-write | current | Contains the description of codec property definition. |
| 1.3.6.1.4.1.272.4.53.8.2.1.3 | ColumnmpsCodecPropertyCodecs | read-write | current | For codecs, supported by the provider or extension: ulaw (1) alaw (2) g729 (4) g726 (8) g726_16 (16) g726_32 (32) g726_40 (64) g728 (128) g723_63 (256) g723_53… |
| 1.3.6.1.4.1.272.4.53.8.2.1.4 | ColumnmpsCodecPropertyOrder | read-write | current | Sorting the codecs default -> system default order quality -> highest quality first lowest -> lowest bandwith first highest -> highest bandwith first |
| 1.3.6.1.4.1.272.4.53.8.2.1.5 | ColumnmpsCodecPropertyFacilities | read-write | current | Facilities for codec settings: g726coding: 0 -> I.366 1 -> RFC 3551/X.420 |
| 1.3.6.1.4.1.272.4.53.8.2.1.6 | ColumnmpsCodecPropertyAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.8.3 | NodempsVoIPConfig | |||
| 1.3.6.1.4.1.272.4.53.8.3.1 | ScalarmpsVoIPConfigRtpPort | read-write | current | Start value of dynamic RTP port. |
| 1.3.6.1.4.1.272.4.53.8.3.2 | ScalarmpsVoIPRegTimer | read-write | current | Registration timer in seconds for IP extension. Set to 0 to get the time from the VoIP client. |
| 1.3.6.1.4.1.272.4.53.8.3.3 | ScalarmpsVoIPDscpSignalling | read-write | current | The DSCP value used in IP header for signalling data. |
| 1.3.6.1.4.1.272.4.53.8.3.4 | ScalarmpsVoIPServerCertIndex | read-write | current | Index of certificate entry in certTable to be used as server certificate for SIPS transport. If 0, predefined certificate of SIP stack is used. |
| 1.3.6.1.4.1.272.4.53.8.3.5 | ScalarmpsVoIPSubscribeTimer | read-write | current | Timer value in seconds for SIP SUBSCRIBE session. |
| 1.3.6.1.4.1.272.4.53.9 | NodempsPhonebook | |||
| 1.3.6.1.4.1.272.4.53.9.1 | TablempsPhonebookTable | not-accessible | current | This table contains information about the PBX phonebook. |
| 1.3.6.1.4.1.272.4.53.9.1.1 | RowmpsPhonebookEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.9.1.1.1 | ColumnmpsPhonebookIndex | read-write | current | A unique value for each phonebook entry. |
| 1.3.6.1.4.1.272.4.53.9.1.1.2 | ColumnmpsPhonebookName | read-write | current | This name will be displayed at the telephone. |
| 1.3.6.1.4.1.272.4.53.9.1.1.3 | ColumnmpsPhonebookNumber | read-write | current | This variable contains the number. |
| 1.3.6.1.4.1.272.4.53.9.1.1.4 | ColumnmpsPhonebookBundle | read-write | current | This variable contains the bundle number. Reference to mpsTrunkBundleTable. |
| 1.3.6.1.4.1.272.4.53.9.1.1.5 | ColumnmpsPhonebookCallThroughAdminStatus | read-write | current | If enable the remote can use the call through feature. |
| 1.3.6.1.4.1.272.4.53.9.2 | TablempsUserPhonebookTable | not-accessible | current | This table contains information about the private user phonebook. |
| 1.3.6.1.4.1.272.4.53.9.2.1 | RowmpsUserPhonebookEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.9.2.1.1 | ColumnmpsUserPhonebookIndex | read-write | current | A unique value for each user phonebook entry. |
| 1.3.6.1.4.1.272.4.53.9.2.1.2 | ColumnmpsUserPhonebookUserIndex | read-write | current | Reference to owner of this private phonebook entry (mpsUserIndex in mpsUserTable). An entry is visible via phonebook access only to this user. |
| 1.3.6.1.4.1.272.4.53.9.2.1.3 | ColumnmpsUserPhonebookName | read-write | current | This name will be displayed at the telephone. |
| 1.3.6.1.4.1.272.4.53.9.2.1.4 | ColumnmpsUserPhonebookNumber | read-write | current | This variable contains the number. |
| 1.3.6.1.4.1.272.4.53.9.2.1.5 | ColumnmpsUserPhonebookAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.10 | NodempsArs | |||
| 1.3.6.1.4.1.272.4.53.10.1 | NodempsArsRoutingConfig | |||
| 1.3.6.1.4.1.272.4.53.10.1.1 | ScalarmpsArsRoutingFallbackLevel | read-write | current | This variable contains the maximum fallback level. |
| 1.3.6.1.4.1.272.4.53.10.1.2 | ScalarmpsArsRoutingFallbackAction | read-write | current | This value determine if fallback is enabled (true) or disabled (false). |
| 1.3.6.1.4.1.272.4.53.10.2 | TablempsArsZoneDetailsTable | not-accessible | current | This table contains information about zone numbers, assigning each entry to a zone in the zone table. |
| 1.3.6.1.4.1.272.4.53.10.2.1 | RowmpsArsZoneDetailsEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.10.2.1.1 | ColumnmpsArsZoneDetailsIndex | read-write | current | A unique index for each zone. |
| 1.3.6.1.4.1.272.4.53.10.2.1.2 | ColumnmpsArsZoneDetailsNumber | read-write | current | This object specifies a number prefix for the Automatic Route Selection zone. |
| 1.3.6.1.4.1.272.4.53.10.2.1.3 | ColumnmpsArsZoneDetailsDescription | read-write | current | An additional name description. |
| 1.3.6.1.4.1.272.4.53.10.2.1.4 | ColumnmpsArsZoneDetailsZoneIndex | read-write | current | This object references the ZoneIndex in mpsArsZoneTable assigned to the entry. |
| 1.3.6.1.4.1.272.4.53.10.2.1.5 | ColumnmpsArsZoneDetailsAdminStatus | read-write | current | Specifies whether this entry defines a mpsArsZoneDetailsEntry or should be deleted |
| 1.3.6.1.4.1.272.4.53.10.3 | TablempsArsZoneTable | not-accessible | current | This table contains information about Automatic Route Selection zones. |
| 1.3.6.1.4.1.272.4.53.10.3.1 | RowmpsArsZoneEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.10.3.1.1 | ColumnmpsArsZoneIndex | read-write | current | A unique index for each zone definition. |
| 1.3.6.1.4.1.272.4.53.10.3.1.2 | ColumnmpsArsZoneDescription | read-write | current | This object defines a zone description for the Automatic Route Selection functionality. |
| 1.3.6.1.4.1.272.4.53.10.3.1.3 | ColumnmpsArsZoneAdminStatus | read-write | current | Specifies whether this entry defines an LCR Zone or should be deleted |
| 1.3.6.1.4.1.272.4.53.10.4 | TablempsArsRoutingTable | not-accessible | current | This table contains information about routing rule of the LCR routing. |
| 1.3.6.1.4.1.272.4.53.10.4.1 | RowmpsArsRoutingEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.10.4.1.1 | ColumnmpsArsRoutingIndex | read-write | current | A unique index for each ArsRouting entry. |
| 1.3.6.1.4.1.272.4.53.10.4.1.2 | ColumnmpsArsRoutingPrio | read-write | current | This object specifies the prio among the routing entries refering the same Zone,Day and Week entries. |
| 1.3.6.1.4.1.272.4.53.10.4.1.3 | ColumnmpsArsRoutingZone | read-write | current | This object specifies an index in the mpsArsZoneTable. |
| 1.3.6.1.4.1.272.4.53.10.4.1.4 | ColumnmpsArsRoutingDays | read-write | current | This object specifies the weekdays this routing shall be active. |
| 1.3.6.1.4.1.272.4.53.10.4.1.5 | ColumnmpsArsRoutingAdminStatus | read-write | current | Specifies whether this entry defines a routing or should be deleted |
| 1.3.6.1.4.1.272.4.53.10.5 | TablempsArsRoutingDetailsTable | not-accessible | current | This table assigns a carrier and start time selection to an entry in the mpsArsRoutingTable. |
| 1.3.6.1.4.1.272.4.53.10.5.1 | RowmpsArsRoutingDetailsEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.10.5.1.1 | ColumnmpsArsRoutingDetailsHour | read-write | current | This object specifies the start hour for activity of this routing entry. |
| 1.3.6.1.4.1.272.4.53.10.5.1.2 | ColumnmpsArsRoutingDetailsMinute | read-write | current | This object specifies the start minute for activity of this routing entry. |
| 1.3.6.1.4.1.272.4.53.10.5.1.3 | ColumnmpsArsRoutingDetailsRoutingIndex | read-write | current | This object specifies a number for the LCR zone. Reference to mpsARSZoneIndex. |
| 1.3.6.1.4.1.272.4.53.10.5.1.4 | ColumnmpsArsRoutingDetailsCarrierIndex | read-write | current | A unique index for each carrier. Reference to mpsARSCarrierIndex. |
| 1.3.6.1.4.1.272.4.53.10.5.1.5 | ColumnmpsArsRoutingDetailsAdminStatus | read-write | current | Specifies whether this entry defines a LCR RoutingDetails Entry or should be deleted |
| 1.3.6.1.4.1.272.4.53.10.6 | TablempsArsCarrierTable | not-accessible | current | This table contains information about carrier used by Automatic Route Selection feature. |
| 1.3.6.1.4.1.272.4.53.10.6.1 | RowmpsArsCarrierEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.10.6.1.1 | ColumnmpsArsCarrierIndex | read-write | current | A unique index for each carrier. |
| 1.3.6.1.4.1.272.4.53.10.6.1.2 | ColumnmpsArsCarrierDisplayName | read-write | current | This object specifies a Carrier description for the Autom. Route Selection functionality. The DisplayName can be shown on the sytem phones. |
| 1.3.6.1.4.1.272.4.53.10.6.1.3 | ColumnmpsArsCarrierNumber | read-write | current | This object specifies the number to be inserted to select a special route (carrier). |
| 1.3.6.1.4.1.272.4.53.10.6.1.4 | ColumnmpsArsCarrierNumberPresentation | read-write | current | show: number presentation is active (CLIP). hide: number presentation is restricted (CLIR). |
| 1.3.6.1.4.1.272.4.53.10.6.1.5 | ColumnmpsArsCarrierRoutingMode | read-write | current | This object specifies the routing mode for this carrier: RoutingMode=standard -> Route via standard (ClassOfService) settings, RoutingMode=bundle -> Route via … |
| 1.3.6.1.4.1.272.4.53.10.6.1.6 | ColumnmpsArsCarrierRoutingModeNumber | read-write | current | This object specifies the bundle (number as string, reference to mpsTrunkBundleTable) or internal MSN depending on the selected RoutingMode. |
| 1.3.6.1.4.1.272.4.53.10.6.1.7 | ColumnmpsArsCarrierRoutingAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.10.6.1.8 | ColumnmpsArsCarrierRoutingTargetIndex | read-write | current | This variable contains the index (reference) of the target to be used for routing: RoutingMode=standard -> TargetIndex = 0, RoutingMode=bundle -> TargetIndex =… |
| 1.3.6.1.4.1.272.4.53.11 | NodempsFaxSwitch | |||
| 1.3.6.1.4.1.272.4.53.11.1 | TablempsFaxSwitchTable | not-accessible | current | This table contains the information about fax switches. |
| 1.3.6.1.4.1.272.4.53.11.1.1 | RowmpsFaxSwitchEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.11.1.1.1 | ColumnmpsFaxSwitchIndex | read-write | current | A unique value for each fax switch. Use the same value in mpsFaxSwitchModeIndex and mpsFaxSwitchUserIndex as reference to this entry. |
| 1.3.6.1.4.1.272.4.53.11.1.1.2 | ColumnmpsFaxSwitchCallCalendar | read-write | current | Select a calendar to switch the fax mode automatically. The active mode will be set in mpsFaxSwitchUserModeNumber in mpsFaxSwitchUserTable. |
| 1.3.6.1.4.1.272.4.53.11.1.1.3 | ColumnmpsFaxSwitchAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.11.2 | TablempsFaxSwitchModeTable | not-accessible | current | This table contains the information about fax switch modes. |
| 1.3.6.1.4.1.272.4.53.11.2.1 | RowmpsFaxSwitchModeEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.11.2.1.1 | ColumnmpsFaxSwitchModeIndex | read-write | current | A unique value for each fax switch. Use the same value in mpsFaxSwitchIndex and mpsFaxSwitchUserIndex as reference to this entry. |
| 1.3.6.1.4.1.272.4.53.11.2.1.2 | ColumnmpsFaxSwitchModeNumber | read-write | current | A unique value or each mode of fax switch. The current active fax mode is set in mpsFaxSwitchUserModeNumber in mpsFaxSwitchUserTable. |
| 1.3.6.1.4.1.272.4.53.11.2.1.3 | ColumnmpsFaxSwitchModeExtension | read-write | current | This variable contains the extension index of the fax port. |
| 1.3.6.1.4.1.272.4.53.11.2.1.4 | ColumnmpsFaxSwitchModeCNGTimeSlice | read-write | current | This variable contains the time slice in seconds to detect the CNG tone. |
| 1.3.6.1.4.1.272.4.53.11.2.1.5 | ColumnmpsFaxSwitchModeRingingTime | read-write | current | This variable contains the time in seconds how long the extension will be called. |
| 1.3.6.1.4.1.272.4.53.11.2.1.6 | ColumnmpsFaxSwitchModeAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.11.3 | TablempsFaxSwitchUserTable | not-accessible | current | This table contains the information about current mode for fax switches. |
| 1.3.6.1.4.1.272.4.53.11.3.1 | RowmpsFaxSwitchUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.11.3.1.1 | ColumnmpsFaxSwitchUserIndex | read-write | current | A unique value for each fax switch. Use the same value in mpsFaxSwitchIndex and mpsFaxSwitchModeIndex as reference to this entry. |
| 1.3.6.1.4.1.272.4.53.11.3.1.2 | ColumnmpsFaxSwitchUserModeNumber | read-write | current | Select the active fax mode number. If a calendar in mpsFaxSwitchTable is selected the mode is switched automatically. |
| 1.3.6.1.4.1.272.4.53.11.3.1.3 | ColumnmpsFaxSwitchUserAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.12 | NodempsCalendar | |||
| 1.3.6.1.4.1.272.4.53.12.1 | TablempsCalendarTable | not-accessible | current | This table contains information about calendars. |
| 1.3.6.1.4.1.272.4.53.12.1.1 | RowmpsCalendarEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.12.1.1.1 | ColumnmpsCalendarIndex | read-write | current | A unique value for each calendar. Use the same value in mpsCalSetting->mpsCalSetCalIndex as reference to this entry. |
| 1.3.6.1.4.1.272.4.53.12.1.1.2 | ColumnmpsCalendarDescription | read-write | current | Description of this calendar. |
| 1.3.6.1.4.1.272.4.53.12.1.1.3 | ColumnmpsCalendarType | read-write | current | This variable contains the type of the calendar. group(1) : calendar to switch group mode. dayNight(2) : calendar to switch between day and night mode of the w… |
| 1.3.6.1.4.1.272.4.53.12.1.1.4 | ColumnmpsCalendarFacilities | read-write | current | This variable contains specific facilities of the calendar useHoliday (1) : consider holiday or not. |
| 1.3.6.1.4.1.272.4.53.12.1.1.5 | ColumnmpsCalendarAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.12.2 | TablempsCalSettingTable | not-accessible | current | This table contains information about day of the calendar. |
| 1.3.6.1.4.1.272.4.53.12.2.1 | RowmpsCalSettingEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.12.2.1.1 | ColumnmpsCalSetIndex | read-write | current | A unique value for calendar. Use the same value in mpsCalDetail->mpsCalDetailIndex as reference to this entry. |
| 1.3.6.1.4.1.272.4.53.12.2.1.2 | ColumnmpsCalSetCalIndex | read-write | current | Reference to mpsCalendar->mpsCalendarIndex. |
| 1.3.6.1.4.1.272.4.53.12.2.1.3 | ColumnmpsCalSetDay | read-write | current | This variable contains valid days for this calendar. |
| 1.3.6.1.4.1.272.4.53.12.2.1.4 | ColumnmpsCalSetAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.12.3 | TablempsCalDetailTable | not-accessible | current | This table contains information about hour, minute and mode of the calendar. |
| 1.3.6.1.4.1.272.4.53.12.3.1 | RowmpsCalDetailEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.12.3.1.1 | ColumnmpsCalDetailIndex | read-write | current | A unique value for calendar. Use the same value in mpsCalSetIndex->CalSetIndex as reference to this entry. |
| 1.3.6.1.4.1.272.4.53.12.3.1.2 | ColumnmpsCalDetailHour | read-write | current | This variable contains the hour for the switching time. |
| 1.3.6.1.4.1.272.4.53.12.3.1.3 | ColumnmpsCalDetailMin | read-write | current | This variable contains the minutes for the switching time. |
| 1.3.6.1.4.1.272.4.53.12.3.1.4 | ColumnmpsCalDetailMode | read-write | current | This variable contains the mode, to which the calendar will be switched. |
| 1.3.6.1.4.1.272.4.53.12.3.1.5 | ColumnmpsCalDetailAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.12.4 | TablempsPublicHolidayTable | not-accessible | current | This table contains dates of public holiday. This days will be considered, if useHoliday in mpsCalendarFacilities of mpsCalendarTable is set. |
| 1.3.6.1.4.1.272.4.53.12.4.1 | RowmpsPublicHolidayEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.12.4.1.1 | ColumnmpsPubHolIndex | read-write | current | A unique value for public holiday. |
| 1.3.6.1.4.1.272.4.53.12.4.1.2 | ColumnmpsPubHolDescription | read-write | current | Description of this public holiday. |
| 1.3.6.1.4.1.272.4.53.12.4.1.3 | ColumnmpsPubHolDateDay | read-write | current | This variable contains the day of the public holiday |
| 1.3.6.1.4.1.272.4.53.12.4.1.4 | ColumnmpsPubHolDateMonth | read-write | current | This variable contains the month of the public holiday. |
| 1.3.6.1.4.1.272.4.53.12.4.1.5 | ColumnmpsPubHolDateEndDay | read-write | current | This variable contains the end day for period setting. |
| 1.3.6.1.4.1.272.4.53.12.4.1.6 | ColumnmpsPubHolDateEndMonth | read-write | current | This variable contains the end month for period setting. |
| 1.3.6.1.4.1.272.4.53.12.4.1.7 | ColumnmpsPubHolAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.13 | NodempsReRoute | |||
| 1.3.6.1.4.1.272.4.53.13.1 | TablempsReRouteTable | not-accessible | current | This table contains settings for the reroute functionality. |
| 1.3.6.1.4.1.272.4.53.13.1.1 | RowmpsReRouteEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.13.1.1.1 | ColumnmpsReRouteIndex | read-write | current | A unique value for each reroute function. |
| 1.3.6.1.4.1.272.4.53.13.1.1.2 | ColumnmpsReRouteDescr | read-write | current | This variable contains the name of the rerouting function. |
| 1.3.6.1.4.1.272.4.53.13.1.1.3 | ColumnmpsReRouteType | read-write | current | This variable contains type of the rerouting function. |
| 1.3.6.1.4.1.272.4.53.13.1.1.4 | ColumnmpsReRouteBusyQueueSize | read-write | current | This variable contains the max. number of calls in the queue if mpsReRouteType = onBusy. |
| 1.3.6.1.4.1.272.4.53.13.1.1.5 | ColumnmpsReRouteBusyMoh | read-write | current | Incoming call can be acctepted with MoH (!= off). This variable contains the selected music on hold (MoH). Possible values are: file: variable mpsReRouteBusyMo… |
| 1.3.6.1.4.1.272.4.53.13.1.1.6 | ColumnmpsReRouteBusyQueueTime | read-write | current | This variable contains the max. time that a call will remain in the busy queue, before droped. '0' = 'endless' |
| 1.3.6.1.4.1.272.4.53.13.1.1.7 | ColumnmpsReRouteNoReplyTime | read-write | current | The reroute type = onNoReply allow you to configure a time interval in seconds, after the incoming call was connected to the announcement. |
| 1.3.6.1.4.1.272.4.53.13.1.1.8 | ColumnmpsReRouteAnnouncement | read-write | current | An incoming call to the rerouting function gets connected to this announcement, unless it's off. Possible values are: file: variable mpsReRouteAnnFileDirectory… |
| 1.3.6.1.4.1.272.4.53.13.1.1.9 | ColumnmpsReRouteTargetType | read-write | current | This variable contains the target type of the rerouting function, after the announcement finished. 'off' means the call doesn't get dropped to an target but di… |
| 1.3.6.1.4.1.272.4.53.13.1.1.10 | ColumnmpsReRouteTargetIndex | read-write | current | This variable contains index of the target table or zero, mpsTrunkNumberTarget=group : index = mpsGroupIndex. mpsTrunkNumberTarget=extension : index = Extensio… |
| 1.3.6.1.4.1.272.4.53.13.1.1.11 | ColumnmpsReRouteTransferCond | read-write | current | This variable contains the file/tone the calling party hears while new target gets called. Possible values are: ringtone: use same tone as for ringing indicati… |
| 1.3.6.1.4.1.272.4.53.13.1.1.12 | ColumnmpsReRouteAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.13.1.1.13 | ColumnmpsReRoutePlayBackCnt | read-write | current | This variable contains the playback count. '0' = 'endless'. |
| 1.3.6.1.4.1.272.4.53.13.1.1.14 | ColumnmpsReRouteAutoExchange | read-write | current | This variable contains the call switching function auto(1) : automatic without direct dial-in. autoWithoutDisa(2) : automatic with direct dial-in. autoWithDisa… |
| 1.3.6.1.4.1.272.4.53.13.1.1.15 | ColumnmpsReRouteBusyMohFileDirectory | read-write | current | Name of directory (on flash medium) which contains file to be used for music on hold. This variable references the entry in mpsWaveFile table where variable mp… |
| 1.3.6.1.4.1.272.4.53.13.1.1.16 | ColumnmpsReRouteBusyMohDefaultVariant | read-write | current | This variable specifies the chosen default variant if variable mpsReRouteBusyMoh is set to value default. Default value for that variable is 1. |
| 1.3.6.1.4.1.272.4.53.13.1.1.17 | ColumnmpsReRouteAnnFileDirectory | read-write | current | Name of directory (on flash medium) which contains file to be used for music on hold. This variable references the entry in mpsWaveFile table where variable mp… |
| 1.3.6.1.4.1.272.4.53.13.1.1.18 | ColumnmpsReRouteTransferCondFileDirectory | read-write | current | Name of directory (on flash medium) which contains file to be used for music on hold. This variable references the entry in mpsWaveFile table where variable mp… |
| 1.3.6.1.4.1.272.4.53.13.1.1.19 | ColumnmpsReRouteTransferCondDefaultVariant | read-write | current | This variable specifies the chosen default variant if variable mpsReRouteTransferCond is set to value default. Default value for that variable is 1. |
| 1.3.6.1.4.1.272.4.53.13.3 | TablempsAnnDisaTable | not-accessible | current | This table contains settings for the DISA (Direct Inward System Access) for an announcement file. |
| 1.3.6.1.4.1.272.4.53.13.3.1 | RowmpsAnnDisaEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.13.3.1.1 | ColumnmpsAnnDisaIndex | read-write | current | A unique value for each announcement DISA. |
| 1.3.6.1.4.1.272.4.53.13.3.1.2 | ColumnmpsAnnDisaReRouteIndex | read-write | current | This variable contains the reroute index. Reference to mpsreRouteIndex. |
| 1.3.6.1.4.1.272.4.53.13.3.1.3 | ColumnmpsAnnDisaNumber | read-write | current | This variable contains number of the DISA for the reroute index. |
| 1.3.6.1.4.1.272.4.53.13.3.1.4 | ColumnmpsAnnDisaTargetType | read-write | current | This variable contains the default target type for this DISA, default is group. |
| 1.3.6.1.4.1.272.4.53.13.3.1.5 | ColumnmpsAnnDisaTargetIndex | read-write | current | This variable contains index of the target table or zero, mpsTrunkNumberTarget=group : index = mpsGroupIndex. mpsTrunkNumberTarget=extension : index = Extensio… |
| 1.3.6.1.4.1.272.4.53.13.3.1.6 | ColumnmpsAnnDisaAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.13.4 | TablempsWaveFileTable | not-accessible | current | This table contains settings for each wave file stored on an external memory device (e.g. SD-Card) |
| 1.3.6.1.4.1.272.4.53.13.4.1 | RowmpsWaveFileEntry | not-accessible | current | This entry only is created by the respective device driver |
| 1.3.6.1.4.1.272.4.53.13.4.1.1 | ColumnmpsWaveFileIndex | read-only | current | A unique index for each wave file table entry. |
| 1.3.6.1.4.1.272.4.53.13.4.1.2 | ColumnmpsWaveFileDescription | read-write | current | The description can be used to assign an alias name to the wave file. |
| 1.3.6.1.4.1.272.4.53.13.4.1.3 | ColumnmpsWaveFileDirectory | read-write | current | Specifies the complete path/tree where the wave file can be found on the mounted device. |
| 1.3.6.1.4.1.272.4.53.13.4.1.4 | ColumnmpsWaveFileName | read-write | current | Simply contains the wave file name on the mounted device. |
| 1.3.6.1.4.1.272.4.53.13.4.1.5 | ColumnmpsWaveFileAcousticProperties | read-only | current | Optionally contains acoustic properties of the wave file: e.g. audioformat, bit-rate, sample-rate etc. |
| 1.3.6.1.4.1.272.4.53.13.4.1.6 | ColumnmpsWaveFileSize | read-write | current | This variable contains the wave file size in kbytes. |
| 1.3.6.1.4.1.272.4.53.13.4.1.7 | ColumnmpsWaveFileDuration | read-only | current | This variable contains the wave file (music) duration in seconds. |
| 1.3.6.1.4.1.272.4.53.13.4.1.8 | ColumnmpsWaveFileVolume | read-write | current | This variable contains the volume adjustment level for the wave file to be played back with (approximately in 3 dB steps): negative values -> attenuate during … |
| 1.3.6.1.4.1.272.4.53.13.4.1.9 | ColumnmpsWaveFileStatus | read-write | current | Wave file status: create(1) -> new wave file shall be stored on the device remove(2) -> wave file shall be deleted on the storage device done(3) -> synchroniza… |
| 1.3.6.1.4.1.272.4.53.13.4.1.10 | ColumnmpsWaveFileUploadResult | read-write | current | Wave file upload result (error) code: success(1) -> the wave file upload was successful, no-mem-card(2) -> no memory card plugged, no-mem-space(3) -> no more s… |
| 1.3.6.1.4.1.272.4.53.13.5 | TablempsReRouteApplTable | not-accessible | current | This table contains settings for the reroute application. |
| 1.3.6.1.4.1.272.4.53.13.5.1 | RowmpsReRouteApplEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.13.5.1.1 | ColumnmpsReRouteApplIndex | read-write | current | A unique value for each reroute application. |
| 1.3.6.1.4.1.272.4.53.13.5.1.2 | ColumnmpsReRouteApplDescr | read-write | current | This variable contains the name of the rerouting application. |
| 1.3.6.1.4.1.272.4.53.13.5.1.3 | ColumnmpsReRouteApplType | read-write | current | This variable contains type of the rerouting application. trunkNumber: used for external trunk numbers with call distribution 'reroute'. extension : used for i… |
| 1.3.6.1.4.1.272.4.53.13.5.1.4 | ColumnmpsReRouteApplCalendar | read-write | current | Select a calendar index to switch the acitve mode this rerouting application automatically. |
| 1.3.6.1.4.1.272.4.53.13.5.1.5 | ColumnmpsReRouteApplAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.13.6 | TablempsReRouteApplModeTable | not-accessible | current | This table contains reroute information for each rerouting application and mode. |
| 1.3.6.1.4.1.272.4.53.13.6.1 | RowmpsReRouteApplModeEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.13.6.1.1 | ColumnmpsReRouteApplModeIndex | read-write | current | A unique value for each entry. |
| 1.3.6.1.4.1.272.4.53.13.6.1.2 | ColumnmpsReRouteApplModeApplIndex | read-write | current | This variable contains the reroute application index. Reference to mpsReReouteApplTable. |
| 1.3.6.1.4.1.272.4.53.13.6.1.3 | ColumnmpsReRouteApplModeModeNumber | read-write | current | For each rerouting application index, several modes can exist. |
| 1.3.6.1.4.1.272.4.53.13.6.1.4 | ColumnmpsReRouteApplModeRerouteIndex | read-write | current | Index of the ReRouting function in mpsReRouteTable. Value 0 means that ReRouting function is inactive. |
| 1.3.6.1.4.1.272.4.53.13.6.1.5 | ColumnmpsReRouteApplModeAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.14 | NodempsTerminal | |||
| 1.3.6.1.4.1.272.4.53.14.1 | TablempsTerminalTable | not-accessible | current | This table contains information about terminal endpoints. |
| 1.3.6.1.4.1.272.4.53.14.1.1 | RowmpsTerminalEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.14.1.1.1 | ColumnmpsTerminalIndex | read-write | current | A unique value for each terminal. |
| 1.3.6.1.4.1.272.4.53.14.1.1.2 | ColumnmpsTerminalIfIndex | read-write | current | Reference to mpsDeviceTable. 0 = no reference. |
| 1.3.6.1.4.1.272.4.53.14.1.1.3 | ColumnmpsTerminalPhoneType | read-write | current | Select the phone type of the terminal: standard (1) : standard terminal systemphone (2) : the terminal is a system phone vms (3) : internal Voice Mail Server o… |
| 1.3.6.1.4.1.272.4.53.14.1.1.4 | ColumnmpsTerminalType | read-write | current | This varibale contains the terminal type: telephone(1) : 'normal' phone answering-machine(2): answering machine voice-mail(3) : external voice mail server erme… |
| 1.3.6.1.4.1.272.4.53.14.1.1.5 | ColumnmpsTerminalDescr | read-write | current | A textual description of the terminal endpoint. |
| 1.3.6.1.4.1.272.4.53.14.1.1.6 | ColumnmpsTerminalAdminStatus | read-write | current | Admin status of the terminal. Set to 'delete' to delete the whole entry. |
| 1.3.6.1.4.1.272.4.53.14.1.1.7 | ColumnmpsTerminalDoorIntercom | read-write | current | This variable contains the number of the door intercom, refer to mpsDoorIntercomIndex in mpsDoorIntercomTable, only valid for mpsTerminalPhoneType = standard a… |
| 1.3.6.1.4.1.272.4.53.14.1.1.8 | ColumnmpsTerminalIPSystelPort | read-only | current | This variable contains the RTP port number for IP system phone. |
| 1.3.6.1.4.1.272.4.53.14.1.1.9 | ColumnmpsTerminalInterfaceType | read-write | current | This variable contains the interface type, for which type of interface this terminal can be used. |
| 1.3.6.1.4.1.272.4.53.14.1.1.10 | ColumnmpsTerminalOperStatus | read-only | current | Operational status of the terminal. |
| 1.3.6.1.4.1.272.4.53.14.1.1.11 | ColumnmpsTerminalMacAddress | read-write | current | This variable contains the MAC address of the IP terminal. |
| 1.3.6.1.4.1.272.4.53.14.1.1.12 | ColumnmpsTerminalOEMType | read-write | current | OEM device type of the terminal e.g. Siemens OpenStage, Gigaset... |
| 1.3.6.1.4.1.272.4.53.14.2 | TablempsExtensionTerminalTable | not-accessible | current | This table contains the information, which extension is assigned to which terminal. |
| 1.3.6.1.4.1.272.4.53.14.2.1 | RowmpsExtensionTerminalEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.14.2.1.1 | ColumnmpsExtTermIndex | read-write | current | A unique value for each extension-terminal assignment. |
| 1.3.6.1.4.1.272.4.53.14.2.1.2 | ColumnmpsExtTermExt | read-write | current | Contains the index of the assigned extension. |
| 1.3.6.1.4.1.272.4.53.14.2.1.3 | ColumnmpsExtTermTerminal | read-write | current | Contains the index of the terminal for this extension. |
| 1.3.6.1.4.1.272.4.53.14.2.1.4 | ColumnmpsExtTermPrio | read-write | current | Contains the priority of this extension for this terminal. |
| 1.3.6.1.4.1.272.4.53.14.2.1.5 | ColumnmpsExtTermAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.14.3 | TablempsTerminalStatusTable | not-accessible | current | This table contains the status information about IP terminal registered via Provisioning-Server. |
| 1.3.6.1.4.1.272.4.53.14.3.1 | RowmpsTerminalStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.14.3.1.1 | ColumnmpsTerminalStatusMacAddress | read-only | current | This variable contains the MAC address of the IP terminal. |
| 1.3.6.1.4.1.272.4.53.14.3.1.2 | ColumnmpsTerminalStatusDeviceType | read-only | current | This variable contains device type of the terminal. |
| 1.3.6.1.4.1.272.4.53.14.3.1.3 | ColumnmpsTerminalStatusContactURI | read-only | current | This variable contains contact URI of the terminal: e.g. 'http://192.168.0.105:8085/contact_dls.html/ContactDLS' |
| 1.3.6.1.4.1.272.4.53.14.3.1.4 | ColumnmpsTerminalStatusLastSeen | read-only | current | The date of last register at the provisioning server. |
| 1.3.6.1.4.1.272.4.53.14.3.1.5 | ColumnmpsTerminalStatusSerialNr | read-only | current | This variable contains serial number of the terminal. |
| 1.3.6.1.4.1.272.4.53.14.3.1.6 | ColumnmpsTerminalStatusSoftwareVersion | read-only | current | Software version of the IP terminal. |
| 1.3.6.1.4.1.272.4.53.14.3.1.7 | ColumnmpsTerminalStatusConfigDate | read-only | current | The date of last configuration change via the provisioning server. |
| 1.3.6.1.4.1.272.4.53.14.3.1.8 | ColumnmpsTerminalStatusOEMType | read-only | current | OEM device type of the terminal e.g. Siemens OpenStage, Gigaset... |
| 1.3.6.1.4.1.272.4.53.14.4 | TablempsTerminalCmdTable | not-accessible | current | The mpsTerminalCmdTable is used to trigger OpenStage provisioning actions at OpenStage phones. Creating entries: Entries are added to this table by assigning a… |
| 1.3.6.1.4.1.272.4.53.14.4.1 | RowmpsTerminalCmdEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.14.4.1.1 | ColumnmpsTerminalCmdMacAddress | read-write | current | The MAC Address of the OpenStage Phone. Reference to mpsTerminalStatusTable MacAddress. |
| 1.3.6.1.4.1.272.4.53.14.4.1.2 | ColumnmpsTerminalCmdCmd | read-write | current | Command for configuration handling. Possible values are : none(1) -> default value fw-update(2) -> new firmware file shall be stored on the device reset-passwd… |
| 1.3.6.1.4.1.272.4.53.14.4.1.3 | ColumnmpsTerminalCmdState | read-only | current | The state of this command (i.e., mpsTerminalStatusCmd). todo(1) : the command will start soon running(2) : the command is currently executing done(3) : the com… |
| 1.3.6.1.4.1.272.4.53.16 | NodempsHotel | |||
| 1.3.6.1.4.1.272.4.53.16.1 | NodempsHotelConfig | |||
| 1.3.6.1.4.1.272.4.53.16.1.1 | ScalarmpsHotelConfigActive | read-write | current | This value determines, if system hotel functions are active or not. |
| 1.3.6.1.4.1.272.4.53.16.1.2 | ScalarmpsHotelConfigReception1 | read-write | current | This variable contains the first reception phone. Reference to mpsExtensionTable. |
| 1.3.6.1.4.1.272.4.53.16.1.3 | ScalarmpsHotelConfigReception2 | read-write | current | This variable contains the second reception phone. Reference to mpsExtensionTable. |
| 1.3.6.1.4.1.272.4.53.16.1.4 | ScalarmpsHotelConfigWakeUpChoice | read-write | current | If the bit is set, the wakeUp announcement at check-in is selectable via menue access. |
| 1.3.6.1.4.1.272.4.53.16.1.5 | ScalarmpsHotelConfigChargeMultiplier | read-write | current | Charge rate multiplier. e.g. 1 Unit = 0,064 -> mpsHotelConfigChargeMultiplier = 64, mpsHotelConfigChargeExponent = -3. 1 Unit = 1,200 -> mpsHotelConfigChargeMu… |
| 1.3.6.1.4.1.272.4.53.16.1.6 | ScalarmpsHotelConfigChargeExponent | read-write | current | Charge rate exponent. e.g. 1 Unit = 0,064 -> mpsHotelConfigChargeMultiplier = 64, mpsHotelConfigChargeExponent = -3. 1 Unit = 1,200 -> mpsHotelConfigChargeMult… |
| 1.3.6.1.4.1.272.4.53.16.1.7 | ScalarmpsHotelConfigPrintHeader | read-write | current | Definition of header for charging bill printout (at reception) at checkout. |
| 1.3.6.1.4.1.272.4.53.16.1.8 | ScalarmpsHotelConfigPrintFooter | read-write | current | Definition of footer for charging bill printout (at reception) at checkout. |
| 1.3.6.1.4.1.272.4.53.16.1.9 | ScalarmpsHotelConfigFacilities | read-write | current | Hotel global facilities: room-to-room-call-barring : room to room calls are not allowed. |
| 1.3.6.1.4.1.272.4.53.16.2 | NodempsHotelWakeUp | |||
| 1.3.6.1.4.1.272.4.53.16.2.1 | ScalarmpsHotelWakeUpDuration | read-write | current | This variable contains the duration of the wakeUp announcement in seconds. |
| 1.3.6.1.4.1.272.4.53.16.2.2 | ScalarmpsHotelWakeUpPlaybackNumber | read-write | current | This variable contains number of play-back loops. |
| 1.3.6.1.4.1.272.4.53.16.2.3 | ScalarmpsHotelWakeUpRepeatTime | read-write | current | This variable contains the time delay in minutes before repeating the wakeUp call if not connected. |
| 1.3.6.1.4.1.272.4.53.16.2.4 | ScalarmpsHotelWakeUpAnnDefault | read-write | current | This variable contains the selected music on hold (MoH) that the wakeUp party hears, if no special wakeUp announcement is selected for the wakeUp party (defaul… |
| 1.3.6.1.4.1.272.4.53.16.2.5 | ScalarmpsHotelWakeUpNumberOfRepetition | read-write | current | This variable contains number of wake-up-call repetitions. |
| 1.3.6.1.4.1.272.4.53.16.2.6 | ScalarmpsHotelWakeUpAnnDefaultFileDirectory | read-write | current | Name of directory (on flash medium) which contains file to be used for music on hold. This variable references the entry in mpsWaveFile table where variable mp… |
| 1.3.6.1.4.1.272.4.53.16.2.7 | ScalarmpsHotelWakeUpAnnDefaultDefaultVariant | read-write | current | This variable specifies the chosen default variant if variable mpsHotelWakeUpAnnDefault is set to value default. Default value for that variable is 1. |
| 1.3.6.1.4.1.272.4.53.16.3 | TablempsHotelTable | not-accessible | current | This table contains information about the status of the room telephones for hotel function: check-in, check-out, wakeUp settings, room status. |
| 1.3.6.1.4.1.272.4.53.16.3.1 | RowmpsHotelEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.16.3.1.1 | ColumnmpsHotelIndex | read-write | current | A unique value for each hotel room telephone. |
| 1.3.6.1.4.1.272.4.53.16.3.1.2 | ColumnmpsHotelDescription | read-write | current | A description for this hotel room. |
| 1.3.6.1.4.1.272.4.53.16.3.1.3 | ColumnmpsHotelExtension | read-write | current | This variable contains index of the room telephone. Reference to mpsExtensionTable. |
| 1.3.6.1.4.1.272.4.53.16.3.1.4 | ColumnmpsHotelAdditionalInfo | read-write | current | Use for additional description info for the guest e.g language. |
| 1.3.6.1.4.1.272.4.53.16.3.1.5 | ColumnmpsHotelCheckInTime | read-write | current | Date and time of check-in. |
| 1.3.6.1.4.1.272.4.53.16.3.1.6 | ColumnmpsHotelCheckOutStatus | read-write | current | This variable contains the check-out status of the room telephone. |
| 1.3.6.1.4.1.272.4.53.16.3.1.7 | ColumnmpsHotelRoomStatus | read-write | current | This variable contains the room status. unknown(1): room status unknown. notCleaned(2): room not cleaned. cleaned(3): room cleaned, but not checked. checked(4)… |
| 1.3.6.1.4.1.272.4.53.16.3.1.8 | ColumnmpsHotelWakeUpDay | read-write | current | WakeUp day. |
| 1.3.6.1.4.1.272.4.53.16.3.1.9 | ColumnmpsHotelWakeUpMonth | read-write | current | WakeUp month. |
| 1.3.6.1.4.1.272.4.53.16.3.1.10 | ColumnmpsHotelWakeUpYear | read-write | current | WakeUp year. |
| 1.3.6.1.4.1.272.4.53.16.3.1.11 | ColumnmpsHotelWakeUpHour | read-write | current | WakeUp hour. |
| 1.3.6.1.4.1.272.4.53.16.3.1.12 | ColumnmpsHotelWakeUpMin | read-write | current | WakeUp minutes. |
| 1.3.6.1.4.1.272.4.53.16.3.1.13 | ColumnmpsHotelWakeUpType | read-write | current | This variable contains type of the wakeUp call. once(1): wakeUp call only one day. daily(2): WakeUp call daily. |
| 1.3.6.1.4.1.272.4.53.16.3.1.14 | ColumnmpsHotelWakeUpAnnouncement | read-write | current | This variable contains the selected music on hold (MoH) that the wakeUp party hears at wakeUp call. Possible values are: file: variable mpsHotelWakeUpAnnFileDi… |
| 1.3.6.1.4.1.272.4.53.16.3.1.15 | ColumnmpsHotelFacilities | read-write | current | Hotel facilities. mwi-tone : message waiting indication -> special tone. |
| 1.3.6.1.4.1.272.4.53.16.3.1.16 | ColumnmpsHotelAdminStatus | read-write | current | Just for MIB entry deletion. |
| 1.3.6.1.4.1.272.4.53.16.3.1.17 | ColumnmpsHotelDialAuthorisation | read-write | current | Dialing privileges for a hotel extension specifies what type of calls (internal, external, etc. ) this extension can place. Default is incoming. This value is … |
| 1.3.6.1.4.1.272.4.53.16.3.1.18 | ColumnmpsHotelWakeUpAnnFileDirectory | read-write | current | Name of directory (on flash medium) which contains file to be used for music on hold. This variable references the entry in mpsWaveFile table where variable mp… |
| 1.3.6.1.4.1.272.4.53.16.3.1.19 | ColumnmpsHotelWakeUpAnnDefaultVariant | read-write | current | This variable specifies the chosen default variant if variable mpsHotelWakeUpAnnouncement is set to value default. Default value for that variable is 1. |
| 1.3.6.1.4.1.272.4.53.17 | NodempsCall | |||
| 1.3.6.1.4.1.272.4.53.17.1 | TablempsCallTransactionTable | not-accessible | current | This table contains status information about each transaction. |
| 1.3.6.1.4.1.272.4.53.17.1.1 | RowmpsCallTransactionEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.53.17.1.1.1 | ColumnmpsCallTransIndex | read-only | current | A unique ID for each transaction. |
| 1.3.6.1.4.1.272.4.53.17.1.1.2 | ColumnmpsCallTransType | read-only | current | This variable contains the transaction type: subscriber: transaction to/from internal subscriber. trunk: transaction to/from trunk port. parking: a parked call… |
| 1.3.6.1.4.1.272.4.53.17.1.1.3 | ColumnmpsCallTransLocalNumber | read-only | current | This variable contains the local number of the transaction: for mpsCallTransType = subscriber: the number of the internal extension for mpsCallTransType = trun… |
| 1.3.6.1.4.1.272.4.53.17.1.1.4 | ColumnmpsCallTransRemoteNumber | read-only | current | This variable contains the remote number of the transaction: for mpsCallTransType = subscriber: the MSN or DDI of the trunk port for mpsCallTransType = trunk :… |
| 1.3.6.1.4.1.272.4.53.17.1.1.5 | ColumnmpsCallTransRedirectNumber | read-only | current | This variable contains the redirected or redirection number for redirected transactions. |
| 1.3.6.1.4.1.272.4.53.17.1.1.6 | ColumnmpsCallTransDirection | read-only | current | |
| 1.3.6.1.4.1.272.4.53.17.1.1.7 | ColumnmpsCallTransState | read-only | current | This variable contains the state of the transaction. |
| 1.3.6.1.4.1.272.4.53.17.1.1.8 | ColumnmpsCallTransChannel | read-only | current | The corresponding channel number for this transaction. |
| 1.3.6.1.4.1.272.4.53.17.1.1.9 | ColumnmpsCallTransIfIndex | read-only | current | The corresponding interface used for this transaction. |
| 1.3.6.1.4.1.272.4.53.18 | NodempsAlarm | |||
| 1.3.6.1.4.1.272.4.53.18.1 | TablempsSwitchingContactTable | not-accessible | current | This table contains settings for all switching contacts (relays). |
| 1.3.6.1.4.1.272.4.53.18.1.1 | RowmpsSwitchingContactEntry | not-accessible | current | Settings for each switching contact |
| 1.3.6.1.4.1.272.4.53.18.1.1.1 | ColumnmpsSwitchingContactIndex | read-only | current | A unique value for each switching contact (relay number). |
| 1.3.6.1.4.1.272.4.53.18.1.1.2 | ColumnmpsSwitchingContactDescription | read-write | current | A description for this switching contact |
| 1.3.6.1.4.1.272.4.53.18.1.1.3 | ColumnmpsSwitchingContactType | read-write | current | This value defines the application for which the switching contact is used: dial-code(1) : Contact is controlled according to used dial codes (on/off or closed… |
| 1.3.6.1.4.1.272.4.53.18.1.1.4 | ColumnmpsSwitchingContactTimer | read-write | current | Switching contact signalling period in seconds. |
| 1.3.6.1.4.1.272.4.53.18.2 | TablempsAlarmInputTable | not-accessible | current | This table contains settings for all alarm inputs (all FXS ports). |
| 1.3.6.1.4.1.272.4.53.18.2.1 | RowmpsAlarmInputEntry | not-accessible | current | Settings for each alarm input mapped to FXS ports. |
| 1.3.6.1.4.1.272.4.53.18.2.1.1 | ColumnmpsAlarmInputIfIndex | read-write | current | A unique reference to potsIfTable. |
| 1.3.6.1.4.1.272.4.53.18.2.1.2 | ColumnmpsAlarmInputIndicationExtension | read-write | current | A unique reference to mpsExtensionTable. This reference assignes the indication number of the alarm input. |
| 1.3.6.1.4.1.272.4.53.18.2.1.3 | ColumnmpsAlarmInputContact | read-write | current | A unique reference to mpsSwitchingContactTable. This reference assignes a relay contact which have to be switched if alarm input is initiated. |
| 1.3.6.1.4.1.272.4.53.18.2.1.4 | ColumnmpsAlarmInputWaveType | read-write | current | This variable contains the file/tone the remote is provided with, when alarm call is answered. Possible values are: file: variable mpsAlarmInputWaveDir specifi… |
| 1.3.6.1.4.1.272.4.53.18.2.1.5 | ColumnmpsAlarmInputWaveFileDir | read-write | current | Name of directory (on flash medium) which contains the file to be used as alarm call wave file. This variable references the entry in mpsWaveFile table where m… |
| 1.3.6.1.4.1.272.4.53.18.2.1.6 | ColumnmpsAlarmInputWaveDefaultVariant | read-write | current | This variable specifies the chosen default variant if variable mpsAlarmInputWaveType is set to value default. Default value for that variable is 1. |
| 1.3.6.1.4.1.272.4.53.18.2.1.7 | ColumnmpsAlarmInputWavePlayBackCnt | read-write | current | Value contains number of playbacks of selected wave file. (0 = endless). |
| 1.3.6.1.4.1.272.4.53.18.2.1.8 | ColumnmpsAlarmInputGroup | read-write | current | A unique reference to mpsGroupTable. This reference assignes a special group to the alarm input. All settings for call distribution of alarm input are outsourc… |
| 1.3.6.1.4.1.272.4.53.18.2.1.9 | ColumnmpsAlarmInputSignalingTimer | read-write | current | This value contains the signaling timeout of the alarm. After expiration of this timer, the alarm call will be released and delayed for the value stored in mps… |
| 1.3.6.1.4.1.272.4.53.18.2.1.10 | ColumnmpsAlarmInputSignalingRepeat | read-write | current | This value contains the number of signaling repetition on no response (after mpsAlarmInputSignalingTimeout expires) or all team-members are busy (and call wait… |
| 1.3.6.1.4.1.272.4.53.18.2.1.11 | ColumnmpsAlarmInputDelayTimer | read-write | current | This value contains the delay-timer of the alarm. After expiring of this timer, the alarm call will be re-established if mpsAlarmInputSignalingRepeat-counter u… |
| 1.3.6.1.4.1.272.4.53.18.2.1.12 | ColumnmpsAlarmInputExternalConnTimer | read-write | current | This value contains the external connection timer of the alarm. After timer expiry the external alarm call will be released. |
| 1.3.6.1.4.1.272.4.53.18.2.1.13 | ColumnmpsAlarmInputInfoMsg | read-write | current | An info message (UUS1) delivered if alarm is initiated. Terminals must support UUS1-text messages to show this info message. |
| 1.3.6.1.4.1.272.4.53.18.2.1.14 | ColumnmpsAlarmInputAdminStatus | read-write | obsolete | Just for MIB entry deletion and for deactivation. |