FEC-SYSINY-MIB
13 objects
The MIB module for INY specific parts.
Imported Objects
| BINTEC-MIB MISSING | Date sys |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.17.5 | IdentitysysINYMIB | The MIB module for INY specific parts. | ||
| 1.3.6.1.4.1.272.4.17.5.1 | NodesysInyRelais | |||
| 1.3.6.1.4.1.272.4.17.5.1.1 | ScalarsysInyRelaisState | read-write | current | Relais control. off : Relais control coil is always off. on : Relais control coil is always on. alarm : Relais control coil controlled by failure LED. |
| 1.3.6.1.4.1.272.4.17.5.2 | NodesysInyTemperature | |||
| 1.3.6.1.4.1.272.4.17.5.2.1 | ScalarsysInyTemperatureCurrent | read-only | current | Temperature during the last measurement time. |
| 1.3.6.1.4.1.272.4.17.5.2.2 | ScalarsysInyTemperatureMax | read-only | current | Maximum observed temperature. |
| 1.3.6.1.4.1.272.4.17.5.2.3 | ScalarsysInyTemperatureMaxTime | read-only | current | Point in time the maximum temperature was observed. |
| 1.3.6.1.4.1.272.4.17.5.2.4 | ScalarsysInyTemperatureMin | read-only | current | Minimum observed temperature. |
| 1.3.6.1.4.1.272.4.17.5.2.5 | ScalarsysInyTemperatureMinTime | read-only | current | Point in time the minimum temperature was observed. |
| 1.3.6.1.4.1.272.4.17.5.2.6 | ScalarsysInyTemperatureUpdatePeriod | read-write | current | Measurement interval of temperature update in seconds. 0: Disable measurements. |
| 1.3.6.1.4.1.272.4.17.5.2.7 | ScalarsysInyTemperatureLowerThreshold | read-write | current | Minimal allowed temperature. If temperature falls below this threshold, a syslog message is generated. |
| 1.3.6.1.4.1.272.4.17.5.2.8 | ScalarsysInyTemperatureUpperThreshold | read-write | current | Maximal allowed temperature. If temperature raises above this threshold, a syslog message is generated. |
| 1.3.6.1.4.1.272.4.17.5.2.9 | ScalarsysInyTemperatureAlarm | read-only | current | Indicates if the defined temperature thresholds are violated. |