FIBRE-CHANNEL-FE-MIB
145 objects
The MIB module for Fibre Channel Fabric Element.
Imported Objects
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | -- rfc2571 MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.75 | IdentityfcFeMIB | The MIB module for Fibre Channel Fabric Element. | ||
| 1.3.6.1.2.1.75.1 | NodefcFeMIBObjects | |||
| 1.3.6.1.2.1.75.1.1 | NodefcFeConfig | |||
| 1.3.6.1.2.1.75.1.1.1 | ScalarfcFeFabricName | read-write | current | The Name_Identifier of the Fabric to which this Fabric Element belongs. |
| 1.3.6.1.2.1.75.1.1.2 | ScalarfcFeElementName | read-write | current | The Name_Identifier of the Fabric Element. |
| 1.3.6.1.2.1.75.1.1.3 | ScalarfcFeModuleCapacity | read-only | current | The maximum number of modules in the Fabric Element, regardless of their current state. |
| 1.3.6.1.2.1.75.1.1.4 | TablefcFeModuleTable | not-accessible | current | A table that contains, one entry for each module in the Fabric Element, information of the modules. |
| 1.3.6.1.2.1.75.1.1.4.1 | RowfcFeModuleEntry | not-accessible | current | An entry containing the configuration parameters of a module. |
| 1.3.6.1.2.1.75.1.1.4.1.1 | ColumnfcFeModuleIndex | not-accessible | current | This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity. |
| 1.3.6.1.2.1.75.1.1.4.1.2 | ColumnfcFeModuleDescr | read-only | current | A textual description of the module. This value should include the full name and version identification of the module. |
| 1.3.6.1.2.1.75.1.1.4.1.3 | ColumnfcFeModuleObjectID | read-only | current | The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-f… |
| 1.3.6.1.2.1.75.1.1.4.1.4 | ColumnfcFeModuleOperStatus | read-only | current | This object indicates the operational status of the module: online(1) the module is functioning properly; offline(2) the module is not available; testing(3) th… |
| 1.3.6.1.2.1.75.1.1.4.1.5 | ColumnfcFeModuleLastChange | read-only | current | This object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of th… |
| 1.3.6.1.2.1.75.1.1.4.1.6 | ColumnfcFeModuleFxPortCapacity | read-only | current | The number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapaci… |
| 1.3.6.1.2.1.75.1.1.4.1.7 | ColumnfcFeModuleName | read-write | current | The Name_Identifier of the module. |
| 1.3.6.1.2.1.75.1.1.5 | TablefcFxPortTable | not-accessible | current | A table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts. |
| 1.3.6.1.2.1.75.1.1.5.1 | RowfcFxPortEntry | not-accessible | current | An entry containing the configuration and service parameters of a FxPort. |
| 1.3.6.1.2.1.75.1.1.5.1.1 | ColumnfcFxPortIndex | not-accessible | current | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value rema… |
| 1.3.6.1.2.1.75.1.1.5.1.2 | ColumnfcFxPortName | read-only | current | The World_wide Name of this FxPort. Each FxPort has a unique Port World_wide Name within the Fabric. |
| 1.3.6.1.2.1.75.1.1.5.1.3 | ColumnfcFxPortFcphVersionHigh | read-only | current | The highest or most recent version of FC-PH that the FxPort is configured to support. |
| 1.3.6.1.2.1.75.1.1.5.1.4 | ColumnfcFxPortFcphVersionLow | read-only | current | The lowest or earliest version of FC-PH that the FxPort is configured to support. |
| 1.3.6.1.2.1.75.1.1.5.1.5 | ColumnfcFxPortBbCredit | read-only | current | The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flo… |
| 1.3.6.1.2.1.75.1.1.5.1.6 | ColumnfcFxPortRxBufSize | read-only | current | The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort. |
| 1.3.6.1.2.1.75.1.1.5.1.7 | ColumnfcFxPortRatov | read-only | current | The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a R… |
| 1.3.6.1.2.1.75.1.1.5.1.8 | ColumnfcFxPortEdtov | read-only | current | The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition. |
| 1.3.6.1.2.1.75.1.1.5.1.9 | ColumnfcFxPortCosSupported | read-only | current | A value indicating the set of Classes of Service supported by the FxPort. |
| 1.3.6.1.2.1.75.1.1.5.1.10 | ColumnfcFxPortIntermixSupported | read-only | current | A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection. |
| 1.3.6.1.2.1.75.1.1.5.1.11 | ColumnfcFxPortStackedConnMode | read-only | current | A value indicating the mode of Stacked Connect supported by the FxPort. |
| 1.3.6.1.2.1.75.1.1.5.1.12 | ColumnfcFxPortClass2SeqDeliv | read-only | current | A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort. |
| 1.3.6.1.2.1.75.1.1.5.1.13 | ColumnfcFxPortClass3SeqDeliv | read-only | current | A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort. |
| 1.3.6.1.2.1.75.1.1.5.1.14 | ColumnfcFxPortHoldTime | read-only | current | The maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that … |
| 1.3.6.1.2.1.75.1.2 | NodefcFeStatus | |||
| 1.3.6.1.2.1.75.1.2.1 | TablefcFxPortStatusTable | not-accessible | current | A table that contains, one entry for each FxPort in the Fabric Element, operational status and parameters of the FxPorts. |
| 1.3.6.1.2.1.75.1.2.1.1 | RowfcFxPortStatusEntry | not-accessible | current | An entry containing operational status and parameters of a FxPort. |
| 1.3.6.1.2.1.75.1.2.1.1.1 | ColumnfcFxPortID | read-only | current | The address identifier by which this FxPort is identified within the Fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabr… |
| 1.3.6.1.2.1.75.1.2.1.1.2 | ColumnfcFxPortBbCreditAvailable | read-only | current | The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or eq… |
| 1.3.6.1.2.1.75.1.2.1.1.3 | ColumnfcFxPortOperMode | read-only | current | The current operational mode of the FxPort. |
| 1.3.6.1.2.1.75.1.2.1.1.4 | ColumnfcFxPortAdminMode | read-write | current | The desired operational mode of the FxPort. |
| 1.3.6.1.2.1.75.1.2.2 | TablefcFxPortPhysTable | not-accessible | current | A table that contains, one entry for each FxPort in the Fabric Element, physical level status and parameters of the FxPorts. |
| 1.3.6.1.2.1.75.1.2.2.1 | RowfcFxPortPhysEntry | not-accessible | current | An entry containing physical level status and parameters of a FxPort. |
| 1.3.6.1.2.1.75.1.2.2.1.1 | ColumnfcFxPortPhysAdminStatus | read-write | current | The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicate… |
| 1.3.6.1.2.1.75.1.2.2.1.2 | ColumnfcFxPortPhysOperStatus | read-only | current | The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then … |
| 1.3.6.1.2.1.75.1.2.2.1.3 | ColumnfcFxPortPhysLastChange | read-only | current | The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not ch… |
| 1.3.6.1.2.1.75.1.2.2.1.4 | ColumnfcFxPortPhysRttov | read-write | current | The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization. |
| 1.3.6.1.2.1.75.1.2.3 | TablefcFxLoginTable | not-accessible | current | A table that contains, one entry for each NxPort attached to a particular FxPort in the Fabric Element, services parameters established from the most recent Fa… |
| 1.3.6.1.2.1.75.1.2.3.1 | RowfcFxLoginEntry | not-accessible | current | An entry containing service parameters established from a successful Fabric Login. |
| 1.3.6.1.2.1.75.1.2.3.1.1 | ColumnfcFxPortNxLoginIndex | not-accessible | current | The object identifies the associated NxPort in the attachment for which the entry contains information. |
| 1.3.6.1.2.1.75.1.2.3.1.2 | ColumnfcFxPortFcphVersionAgreed | read-only | current | The version of FC-PH that the FxPort has agreed to support from the Fabric Login |
| 1.3.6.1.2.1.75.1.2.3.1.3 | ColumnfcFxPortNxPortBbCredit | read-only | current | The total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached NxPort. It is for buffer… |
| 1.3.6.1.2.1.75.1.2.3.1.4 | ColumnfcFxPortNxPortRxDataFieldSize | read-only | current | The Receive Data Field Size of the attached NxPort. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the NxPort. |
| 1.3.6.1.2.1.75.1.2.3.1.5 | ColumnfcFxPortCosSuppAgreed | read-only | current | A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request. |
| 1.3.6.1.2.1.75.1.2.3.1.6 | ColumnfcFxPortIntermixSuppAgreed | read-only | current | A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only v… |
| 1.3.6.1.2.1.75.1.2.3.1.7 | ColumnfcFxPortStackedConnModeAgreed | read-only | current | A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been agree… |
| 1.3.6.1.2.1.75.1.2.3.1.8 | ColumnfcFxPortClass2SeqDelivAgreed | read-only | current | A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service ha… |
| 1.3.6.1.2.1.75.1.2.3.1.9 | ColumnfcFxPortClass3SeqDelivAgreed | read-only | current | A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has be… |
| 1.3.6.1.2.1.75.1.2.3.1.10 | ColumnfcFxPortNxPortName | read-only | current | The port name of the attached NxPort. |
| 1.3.6.1.2.1.75.1.2.3.1.11 | ColumnfcFxPortConnectedNxPort | read-only | current | The address identifier of the destination NxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If this FxPort is not en… |
| 1.3.6.1.2.1.75.1.2.3.1.12 | ColumnfcFxPortBbCreditModel | read-write | current | This object identifies the BB_Credit model used by the FxPort. |
| 1.3.6.1.2.1.75.1.3 | NodefcFeError | |||
| 1.3.6.1.2.1.75.1.3.1 | TablefcFxPortErrorTable | not-accessible | current | A table that contains, one entry for each FxPort, counters that record the numbers of errors detected. |
| 1.3.6.1.2.1.75.1.3.1.1 | RowfcFxPortErrorEntry | not-accessible | current | An entry containing error counters of a FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.1 | ColumnfcFxPortLinkFailures | read-only | current | The number of link failures detected by this FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.2 | ColumnfcFxPortSyncLosses | read-only | current | The number of loss of synchronization detected by the FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.3 | ColumnfcFxPortSigLosses | read-only | current | The number of loss of signal detected by the FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.4 | ColumnfcFxPortPrimSeqProtoErrors | read-only | current | The number of primitive sequence protocol errors detected by the FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.5 | ColumnfcFxPortInvalidTxWords | read-only | current | The number of invalid transmission word detected by the FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.6 | ColumnfcFxPortInvalidCrcs | read-only | current | The number of invalid CRC detected by this FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.7 | ColumnfcFxPortDelimiterErrors | read-only | current | The number of Delimiter Errors detected by this FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.8 | ColumnfcFxPortAddressIdErrors | read-only | current | The number of address identifier errors detected by this FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.9 | ColumnfcFxPortLinkResetIns | read-only | current | The number of Link Reset Protocol received by this FxPort from the attached NxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.10 | ColumnfcFxPortLinkResetOuts | read-only | current | The number of Link Reset Protocol issued by this FxPort to the attached NxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.11 | ColumnfcFxPortOlsIns | read-only | current | The number of Offline Sequence received by this FxPort. |
| 1.3.6.1.2.1.75.1.3.1.1.12 | ColumnfcFxPortOlsOuts | read-only | current | The number of Offline Sequence issued by this FxPort. |
| 1.3.6.1.2.1.75.1.4 | NodefcFeAccounting | |||
| 1.3.6.1.2.1.75.1.4.1 | TablefcFxPortC1AccountingTable | not-accessible | current | A table that contains, one entry for each FxPort in the Fabric Element, Class 1 accounting information recorded since the management agent has re-initialized. |
| 1.3.6.1.2.1.75.1.4.1.1 | RowfcFxPortC1AccountingEntry | not-accessible | current | An entry containing Class 1 accounting information for each FxPort. |
| 1.3.6.1.2.1.75.1.4.1.1.1 | ColumnfcFxPortC1InFrames | read-only | current | The number of Class 1 frames (other than Class 1 connect- request) received by this FxPort from its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.1.1.2 | ColumnfcFxPortC1OutFrames | read-only | current | The number of Class 1 frames (other than Class 1 connect- request) delivered through this FxPort to its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.1.1.3 | ColumnfcFxPortC1InOctets | read-only | current | The number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.1.1.4 | ColumnfcFxPortC1OutOctets | read-only | current | The number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.1.1.5 | ColumnfcFxPortC1Discards | read-only | current | The number of Class 1 frames discarded by this FxPort. |
| 1.3.6.1.2.1.75.1.4.1.1.6 | ColumnfcFxPortC1FbsyFrames | read-only | current | The number of F_BSY frames generated by this FxPort against Class 1 connect-request. |
| 1.3.6.1.2.1.75.1.4.1.1.7 | ColumnfcFxPortC1FrjtFrames | read-only | current | The number of F_RJT frames generated by this FxPort against Class 1 connect-request. |
| 1.3.6.1.2.1.75.1.4.1.1.8 | ColumnfcFxPortC1InConnections | read-only | current | The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect- request. |
| 1.3.6.1.2.1.75.1.4.1.1.9 | ColumnfcFxPortC1OutConnections | read-only | current | The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request. |
| 1.3.6.1.2.1.75.1.4.1.1.10 | ColumnfcFxPortC1ConnTime | read-only | current | The cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until… |
| 1.3.6.1.2.1.75.1.4.2 | TablefcFxPortC2AccountingTable | not-accessible | current | A table that contains, one entry for each FxPort in the Fabric Element, Class 2 accounting information recorded since the management agent has re-initialized. |
| 1.3.6.1.2.1.75.1.4.2.1 | RowfcFxPortC2AccountingEntry | not-accessible | current | An entry containing Class 2 accounting information for each FxPort. |
| 1.3.6.1.2.1.75.1.4.2.1.1 | ColumnfcFxPortC2InFrames | read-only | current | The number of Class 2 frames received by this FxPort from its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.2.1.2 | ColumnfcFxPortC2OutFrames | read-only | current | The number of Class 2 frames delivered through this FxPort to its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.2.1.3 | ColumnfcFxPortC2InOctets | read-only | current | The number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.2.1.4 | ColumnfcFxPortC2OutOctets | read-only | current | The number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.2.1.5 | ColumnfcFxPortC2Discards | read-only | current | The number of Class 2 frames discarded by this FxPort. |
| 1.3.6.1.2.1.75.1.4.2.1.6 | ColumnfcFxPortC2FbsyFrames | read-only | current | The number of F_BSY frames generated by this FxPort against Class 2 frames. |
| 1.3.6.1.2.1.75.1.4.2.1.7 | ColumnfcFxPortC2FrjtFrames | read-only | current | The number of F_RJT frames generated by this FxPort against Class 2 frames. |
| 1.3.6.1.2.1.75.1.4.3 | TablefcFxPortC3AccountingTable | not-accessible | current | A table that contains, one entry for each FxPort in the Fabric Element, Class 3 accounting information recorded since the management agent has re-initialized. |
| 1.3.6.1.2.1.75.1.4.3.1 | RowfcFxPortC3AccountingEntry | not-accessible | current | An entry containing Class 3 accounting information for each FxPort. |
| 1.3.6.1.2.1.75.1.4.3.1.1 | ColumnfcFxPortC3InFrames | read-only | current | The number of Class 3 frames received by this FxPort from its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.3.1.2 | ColumnfcFxPortC3OutFrames | read-only | current | The number of Class 3 frames delivered through this FxPort to its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.3.1.3 | ColumnfcFxPortC3InOctets | read-only | current | The number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.3.1.4 | ColumnfcFxPortC3OutOctets | read-only | current | The number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort. |
| 1.3.6.1.2.1.75.1.4.3.1.5 | ColumnfcFxPortC3Discards | read-only | current | The number of Class 3 frames discarded by this FxPort. |
| 1.3.6.1.2.1.75.1.5 | NodefcFeCapabilities | |||
| 1.3.6.1.2.1.75.1.5.1 | TablefcFxPortCapTable | not-accessible | current | A table that contains, one entry for each FxPort, the capabilities of the port within the Fabric Element. |
| 1.3.6.1.2.1.75.1.5.1.1 | RowfcFxPortCapEntry | not-accessible | current | An entry containing the Cap of a FxPort. |
| 1.3.6.1.2.1.75.1.5.1.1.1 | ColumnfcFxPortCapFcphVersionHigh | read-only | current | The highest or most recent version of FC-PH that the FxPort is capable of supporting. |
| 1.3.6.1.2.1.75.1.5.1.1.2 | ColumnfcFxPortCapFcphVersionLow | read-only | current | The lowest or earliest version of FC-PH that the FxPort is capable of supporting. |
| 1.3.6.1.2.1.75.1.5.1.1.3 | ColumnfcFxPortCapBbCreditMax | read-only | current | The maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort. |
| 1.3.6.1.2.1.75.1.5.1.1.4 | ColumnfcFxPortCapBbCreditMin | read-only | current | The minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort. |
| 1.3.6.1.2.1.75.1.5.1.1.5 | ColumnfcFxPortCapRxDataFieldSizeMax | read-only | current | The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort. |
| 1.3.6.1.2.1.75.1.5.1.1.6 | ColumnfcFxPortCapRxDataFieldSizeMin | read-only | current | The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort. |
| 1.3.6.1.2.1.75.1.5.1.1.7 | ColumnfcFxPortCapCos | read-only | current | A value indicating the set of Classes of Service that the FxPort is capable of supporting. |
| 1.3.6.1.2.1.75.1.5.1.1.8 | ColumnfcFxPortCapIntermix | read-only | current | A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is on… |
| 1.3.6.1.2.1.75.1.5.1.1.9 | ColumnfcFxPortCapStackedConnMode | read-only | current | A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting. |
| 1.3.6.1.2.1.75.1.5.1.1.10 | ColumnfcFxPortCapClass2SeqDeliv | read-only | current | A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery. |
| 1.3.6.1.2.1.75.1.5.1.1.11 | ColumnfcFxPortCapClass3SeqDeliv | read-only | current | A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery. |
| 1.3.6.1.2.1.75.1.5.1.1.12 | ColumnfcFxPortCapHoldTimeMax | read-only | current | The maximum holding time (in microseconds) that the FxPort is capable of supporting. |
| 1.3.6.1.2.1.75.1.5.1.1.13 | ColumnfcFxPortCapHoldTimeMin | read-only | current | The minimum holding time (in microseconds) that the FxPort is capable of supporting. |
| 1.3.6.1.2.1.75.2 | NodefcFeMIBConformance | |||
| 1.3.6.1.2.1.75.2.1 | NodefcFeMIBCompliances | |||
| 1.3.6.1.2.1.75.2.1.1 | CompliancefcFeMIBMinimumCompliance | read-only | current | The minimum compliance statement for SNMP entities which implement the FIBRE-CHANNEL-FE-MIB. |
| 1.3.6.1.2.1.75.2.1.2 | CompliancefcFeMIBFullCompliance | read-only | current | The full compliance statement for SNMP entities which implement the FIBRE-CHANNEL-FE-MIB. |
| 1.3.6.1.2.1.75.2.2 | NodefcFeMIBGroups | |||
| 1.3.6.1.2.1.75.2.2.1 | GroupfcFeConfigGroup | current | A collection of objects providing the configuration and service parameters of the Fabric Element, the modules, and FxPorts. | |
| 1.3.6.1.2.1.75.2.2.2 | GroupfcFeStatusGroup | current | A collection of objects providing the operational status and established service parameters for the Fabric Element and the attached NxPorts. | |
| 1.3.6.1.2.1.75.2.2.3 | GroupfcFeErrorGroup | current | A collection of objects providing various error statistics detected by the FxPorts. | |
| 1.3.6.1.2.1.75.2.2.4 | GroupfcFeClass1AccountingGroup | current | A collection of objects providing various class 1 performance statistics detected by the FxPorts. | |
| 1.3.6.1.2.1.75.2.2.5 | GroupfcFeClass2AccountingGroup | current | A collection of objects providing various class 2 performance statistics detected by the FxPorts. | |
| 1.3.6.1.2.1.75.2.2.6 | GroupfcFeClass3AccountingGroup | current | A collection of objects providing various class 3 performance statistics detected by the FxPorts. | |
| 1.3.6.1.2.1.75.2.2.7 | GroupfcFeCapabilitiesGroup | current | A collection of objects providing the inherent capability of each FxPort within the Fabric Element. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FcAddressId | OCTET STRING (SIZE (3)) | current | Represents Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric. |
| FcBbCredit | Integer32 (0..32767) | current | Represents the buffer-to-buffer credit of an NxPort or FxPort. |
| FcBbCreditModel | INTEGER { regular(1), alternate (2) } | current | Represents the BB_Credit model of an FxPort. |
| FcCosCap | BITS { classF(0), class1(1), class2(2), class3(3), class4(4), class5(5), class6(6) } | current | Represents the class of service capability of an NxPort or FxPort. |
| FcFeFxPortCapacity | Unsigned32 | current | Represents the maximum number of FxPorts within a module. |
| FcFeFxPortIndex | Unsigned32 | current | Represents the FxPort index within a conceptual table. |
| FcFeModuleCapacity | Unsigned32 | current | Represents the maximum number of modules within a Fabric Element. |
| FcFeModuleIndex | Unsigned32 | current | Represents the module index within a conceptual table. |
| FcFeNxPortIndex | Integer32 (1..126) | current | Represents the NxPort index within a conceptual table. |
| FcNameId | OCTET STRING (SIZE (8)) | current | Represents the Worldwide Name associated with a Fibre Channel (FC) entity. |
| FcphVersion | Integer32 (0..255) | current | Represents the version of FC-PH supported by an NxPort or FxPort. |
| FcRxDataFieldSize | Integer32 (128..2112) | current | Represents the receive data field size of an NxPort or FxPort. |
| FcStackedConnMode | INTEGER { none(1), transparent(2), lockedDown(3) } | current | Represents an enumerated value used to indicate the Class 1 Stacked Connect Mode supported by an NxPort or FxPort. |
| MicroSeconds | Unsigned32 | current | Represents time unit value in microseconds. |
| MilliSeconds | Unsigned32 | current | Represents time unit value in milliseconds. |