FIBROLAN-DEVICE-MIB
53 objects
The MIB module to describe a Fibrolan device's system level attributes. This module includes the relevant traps as well. This module is part of Fibrolan's group of generic MIB modules. Copyright (C) Fibrolan Ltd. (2009).
Imported Objects
| FIBROLAN-COMMON-MIB | fibrolanGeneric FlFileServerType FlFileXferDirection FlTemperature FlUtilization |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4467.1000.10 | IdentityflDevice | The MIB module to describe a Fibrolan device's system level attributes. This module includes the relevant traps as well. This module is part of Fibrolan's grou… | ||
| 1.3.6.1.4.1.4467.1000.10.0 | NodeflDeviceNotifications | |||
| 1.3.6.1.4.1.4467.1000.10.0.10 | NotificationpsuStatusChange | current | PSU module state changed (fail or fan fail). Vars: PSU alarm status, PSU status last change | |
| 1.3.6.1.4.1.4467.1000.10.0.11 | NotificationdyingGasp | current | Device is losing power. This is the only trap that will be generated when the device is experiencing total power loss. Cleared by a coldStart alarm. Vars: none. | |
| 1.3.6.1.4.1.4467.1000.10.0.12 | NotificationtemperatureStatusChange | current | Device's internal temperature status has changed. Vars: temperature alarm status, temperature last change | |
| 1.3.6.1.4.1.4467.1000.10.0.13 | NotificationcpuStatusChange | current | CPU (or memory) status has changed. Vars: CPU alarm status, PCU status last change | |
| 1.3.6.1.4.1.4467.1000.10.0.19 | NotificationportMacLimit | current | MAC limit reached on port. Vars: port number | |
| 1.3.6.1.4.1.4467.1000.10.0.50 | NotificationconfigChanged | current | Device configuration has changed. Indicates the startup config was updated (even if it wasn't changed), as a result of a copy running to startup operation. | |
| 1.3.6.1.4.1.4467.1000.10.1 | NodeflDeviceMIBObjects | |||
| 1.3.6.1.4.1.4467.1000.10.1.10 | ScalarflDeviceReboot | read-write | current | Trigger a system reboot. The following sequence must be performed in order for the operation to be triggered: - read the object's value - must be 'ready' - set… |
| 1.3.6.1.4.1.4467.1000.10.1.11 | ScalarflDeviceRestoreDefaults | read-write | current | Trigger a system restore defaults operation. The following sequence must be performed in order for the operation to be triggered: - read the object's value - m… |
| 1.3.6.1.4.1.4467.1000.10.1.12 | ScalarflDeviceSaveConfig | read-write | current | Trigger save of the running config to NV memory (normally becomes the startup config). The following sequence must be performed in order for the operation to b… |
| 1.3.6.1.4.1.4467.1000.10.1.13 | ScalarflDeviceTemperature | read-only | current | The internal device temperature in degrees Centigrade. |
| 1.3.6.1.4.1.4467.1000.10.1.14 | ScalarflDeviceTemperatureAlarmsEnable | read-write | current | Determine whether temperature traps are generated. When disabled, the alarm status object should not be polled (will indicate no alarm). |
| 1.3.6.1.4.1.4467.1000.10.1.15 | ScalarflDeviceTemperatureAlarmStatus | read-only | current | This variable indicates the alarm status of the device's temperature. |
| 1.3.6.1.4.1.4467.1000.10.1.16 | ScalarflDeviceTemperatureStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time the device entered its current temperature status state. If the current state was entered prior to the last … |
| 1.3.6.1.4.1.4467.1000.10.1.100 | TableflDevicePsuStatusTable | not-accessible | current | Device Power Supply Unit (PSU) status table. |
| 1.3.6.1.4.1.4467.1000.10.1.100.1 | RowflDevicePsuStatusEntry | not-accessible | current | The entries of the PSU status table |
| 1.3.6.1.4.1.4467.1000.10.1.100.1.1 | ColumnflDevicePsuIndex | not-accessible | current | The index of the PSU. |
| 1.3.6.1.4.1.4467.1000.10.1.100.1.2 | ColumnflDevicePsuInstalled | read-only | current | Indicates whether PSU is installed or not (in slot) |
| 1.3.6.1.4.1.4467.1000.10.1.100.1.3 | ColumnflDevicePsuStatus | read-only | current | PSU operational status (supplying adequate power/voltage) |
| 1.3.6.1.4.1.4467.1000.10.1.100.1.4 | ColumnflDevicePsuFanStatus | read-only | current | PSU fan operational status (if applicable). singleFail indicates one of two (or more) fans have failed. |
| 1.3.6.1.4.1.4467.1000.10.1.100.1.5 | ColumnflDevicePsuAlarmsEnable | read-write | current | Determine whether PSU traps are generated for this PSU slot. When disabled, the alarm status object should not be polled (will indicate no alarm). |
| 1.3.6.1.4.1.4467.1000.10.1.100.1.6 | ColumnflDevicePsuAlarmStatus | read-only | current | This variable indicates the alarm status of the device's PSUs. fanDown indicates all fans of the power supply are down. |
| 1.3.6.1.4.1.4467.1000.10.1.100.1.7 | ColumnflDevicePsuStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time the PSU entered its current state. If the current state was entered prior to the last re-initialization of t… |
| 1.3.6.1.4.1.4467.1000.10.1.110 | TableflDeviceUpdateTable | not-accessible | current | Device (remote) update table. This table is used for uploading and downloading of maintenance related files (i.e. upgrades and configuration) from and to the s… |
| 1.3.6.1.4.1.4467.1000.10.1.110.1 | RowflDeviceUpdateEntry | not-accessible | current | The entries of the device udpate table. |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.1 | ColumnflDeviceUpdateTableIndex | not-accessible | current | Table index. |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.2 | ColumnflDeviceUpdateType | read-write | current | Update type (target). |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.3 | ColumnflDeviceUpdateFileServerType | read-write | current | The type of remote file server (e.g. TFTP), from which the update file will be retrieved, or to which it will be saved. The type is effectively the file transf… |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.4 | ColumnflDeviceUpdateFileServerAddress | read-write | current | The IP address of the remote file server (e.g. TFTP), from which the update file will be retrieved, or to which it will be saved. Address must be a valid unica… |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.5 | ColumnflDeviceUpdateFileXferDirection | read-write | current | The direction in which the update file transfer will be performed: to or from the remote server. |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.6 | ColumnflDeviceUpdateFileName | read-write | current | The name of the update file. Some systems may not support this object, in which case the name is set using the version name object. The file name may include a… |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.7 | ColumnflDeviceUpdateStart | read-write | current | Trigger the update process. Setting this object to start(2) will initiate the update operation. This can be done only when the object's value is ready(0). If n… |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.8 | ColumnflDeviceUpdateStatus | read-only | current | Status of the update process. Some systems or update processes may support this object partially (i.e. not implement all states). |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.9 | ColumnflDeviceUpdateErrorStatus | read-only | current | Status of the update process. Some systems or update processes may support this object partially (i.e. not implement all errors). |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.10 | ColumnflDeviceUpdateErrorCode | read-only | current | Indicates the error code of the last update operation. If no errors occured (operation completed successfully) this object should be 0. The meaning of the erro… |
| 1.3.6.1.4.1.4467.1000.10.1.110.1.11 | ColumnflDeviceUpdateUrl | read-write | current | The URL string of the update file. In most systems, when this field is used, other fields (e.g. IP address) will not be used. |
| 1.3.6.1.4.1.4467.1000.10.1.120 | TableflDeviceCpuStatusTable | not-accessible | current | CPU Status table. Provides information regarding system's CPU(s) and memory resources. This table is extending the relevant entries in the Entity MIB (physical… |
| 1.3.6.1.4.1.4467.1000.10.1.120.1 | RowflDeviceCpuStatusEntry | not-accessible | current | The entries of the CPU Status table. |
| 1.3.6.1.4.1.4467.1000.10.1.120.1.1 | ColumnflDeviceCpuIndex | not-accessible | current | Index of the CPU table (will be 0 only in most systems). |
| 1.3.6.1.4.1.4467.1000.10.1.120.1.2 | ColumnflDeviceCpuUtilization | read-only | current | Utilization (load) of the CPU in percents of maximum capacity. |
| 1.3.6.1.4.1.4467.1000.10.1.120.1.3 | ColumnflDeviceMemoryUtilization | read-only | current | Utilization (usage) of the memory in percents of physical memory size. |
| 1.3.6.1.4.1.4467.1000.10.1.120.1.4 | ColumnflDeviceNvMemoryUtilization | read-only | current | Utilization (usage) of the NV memory in percents of physical NV memory size. |
| 1.3.6.1.4.1.4467.1000.10.1.120.1.5 | ColumnflDeviceCpuAlarmsEnable | read-write | current | Determine whether CPU traps are generated. When disabled, the alarm status object should not be polled (will indicate no alarm). |
| 1.3.6.1.4.1.4467.1000.10.1.120.1.6 | ColumnflDeviceCpuAlarmStatus | read-only | current | This variable indicates the alarm status of the device's CPU(s) and memory. This object is a bitmap represented as a sum; therefore, it can represent multiple … |
| 1.3.6.1.4.1.4467.1000.10.1.120.1.7 | ColumnflDeviceCpuStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time the CPU entered its current state. If the current state was entered prior to the last re-initialization of t… |
| 1.3.6.1.4.1.4467.1000.10.1.500 | TableflDeviceAlarmThresholdTable | not-accessible | current | Alarm thresholds table. This table provides configuration facilities for threshold crossing alarms (TCA) defined in this MIB module. |
| 1.3.6.1.4.1.4467.1000.10.1.500.1 | RowflDeviceAlarmThresholdEntry | not-accessible | current | The entries of the alarm threshold table. |
| 1.3.6.1.4.1.4467.1000.10.1.500.1.1 | ColumnflDeviceAlarmThresholdTableIndex | not-accessible | current | Table index. |
| 1.3.6.1.4.1.4467.1000.10.1.500.1.2 | ColumnflDeviceAlarmThresholdType | read-only | current | The type of the threshold (enumerated). This object is expected to be extended with new types in future revisions. |
| 1.3.6.1.4.1.4467.1000.10.1.500.1.3 | ColumnflDeviceAlarmThresholdValue | read-write | current | The threshold value beyond which the alarm is active. Note: the type of the threshold determines whether this value is the upper bound for the alarm activation… |
| 1.3.6.1.4.1.4467.1000.10.1.500.1.4 | ColumnflDeviceAlarmThresholdClearValue | read-write | current | The threshold value below which the alarm is cleared. Note: the type of the threshold determines whether this value is the upper bound for the alarm activation… |