FM-MIB
52 objects
The proprietary MIB module for FM module.
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.122 | Identityfsfm | The proprietary MIB module for FM module. | ||
| 1.3.6.1.4.1.10876.101.1.122.1 | NodefsFmSystem | |||
| 1.3.6.1.4.1.10876.101.1.122.1.1 | ScalarfsFmSystemControl | read-write | current | Fault Management module is shutdown or started through this object. When set to 'start', resources required by the FM module is allocated and the module starts… |
| 1.3.6.1.4.1.10876.101.1.122.1.2 | ScalarfsFmModuleStatus | read-write | current | The module status of the Fault Management module. The value enabled(1) indicates the Fault Management module is currently enabled in the system. The value disa… |
| 1.3.6.1.4.1.10876.101.1.122.1.3 | ScalarfsFmTraceOption | read-write | current | This object is used to enable trace statements in Fault Management module. A four byte integer is used for enabling the trace level. Each bit in the four byte … |
| 1.3.6.1.4.1.10876.101.1.122.2 | NodefsFmLinkEvent | |||
| 1.3.6.1.4.1.10876.101.1.122.2.1 | TablefsFmLinkEventTable | not-accessible | current | This table contains objects to configure Link Events on the interfaces. |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1 | RowfsFmLinkEventEntry | not-accessible | current | This table contains action to be taken for each link event. |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1.1 | ColumnfsFmSymPeriodAction | read-write | current | Action to be taken when a Symbol Period Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning' specifi… |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1.2 | ColumnfsFmFrameAction | read-write | current | Action to be taken when a Frame Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning' specifies that … |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1.3 | ColumnfsFmFramePeriodAction | read-write | current | Action to be taken when a Frame Period Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning' specifie… |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1.4 | ColumnfsFmFrameSecSummAction | read-write | current | Action to be taken when a Frame Seconds summary Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning'… |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1.5 | ColumnfsFmCriticalEventAction | read-write | current | Action to be taken when a Critical Event occurs at the local interface and notification is received from remote interface. 'none' specifies no action will be t… |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1.6 | ColumnfsFmDyingGaspAction | read-write | current | Action to be taken when a Dying Gasp event occurs at the local interface and notification is received from remote interface. 'none' specifies no action will be… |
| 1.3.6.1.4.1.10876.101.1.122.2.1.1.7 | ColumnfsFmLinkFaultAction | read-write | current | Action to be taken when a Link Fault Event occurs at the local interface and notification is received from remote interface. 'none' specifies no action will be… |
| 1.3.6.1.4.1.10876.101.1.122.3 | NodefsFmLoopback | |||
| 1.3.6.1.4.1.10876.101.1.122.3.1 | TablefsFmLoopbackTable | not-accessible | current | This table contains objects to configure Remote Loopback mode and loopback tests. |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1 | RowfsFmLoopbackEntry | not-accessible | current | This table contains remote loopback configuration and loopback test configuration. |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.1 | ColumnfsFmLoopbackStatus | read-only | current | The loopback status of the local interface. This status is obtained from the local EOAM Client. When operating in normal mode with no loopback in progress, the… |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.2 | ColumnfsFmLBTestPattern | read-write | current | Test Pattern for the remote loopback test. The default pattern of the test data will be 'F0F0F0F0'H |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.3 | ColumnfsFmLBTestPktSize | read-write | current | Test packet size for the remote loopback test |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.4 | ColumnfsFmLBTestCount | read-write | current | Number of Test packets to be sent for the remote loopback test |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.5 | ColumnfsFmLBTestWaitTime | read-write | current | This timer is started after sending the last test packet. The Fault management module will wait until this timer expires or the packet reception counter is equ… |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.6 | ColumnfsFmLBTestCommand | read-write | current | This attribute initiates remote loopback test with an EOAM peer. Writing startLoopbackTest(2) to this attribute cause the fault management send loopback test p… |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.7 | ColumnfsFmLBTestStatus | read-only | current | This attribute indicates the status of the remote loopback test. 'notInitiated' indicates that the loopback has not been initiated yet. 'loopbackbTestInprogres… |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.8 | ColumnfsFmLBTestStartTimestamp | read-only | current | Start timestamp of the current loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.9 | ColumnfsFmLBTestEndTimestamp | read-only | current | End timestamp of the current loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.10 | ColumnfsFmLBTestTxCount | read-only | current | Statistics of number of Test packets transmitted during current loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.11 | ColumnfsFmLBTestRxCount | read-only | current | Statistics of number of Test packets received during current loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.1.1.12 | ColumnfsFmLBTestMatchCount | read-only | current | Statistics of number of Test packets that matched with the test pattern sent during current loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.2 | TablefsFmLBStatsTable | not-accessible | current | This table contains statistics of the last remote loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.2.1 | RowfsFmLBStatsEntry | not-accessible | current | This table contains remote loopback test results of the last session. This table is updated every time a new loopback test session is started. The current fsFm… |
| 1.3.6.1.4.1.10876.101.1.122.3.2.1.1 | ColumnfsFmLBStatsStartTimestamp | read-only | current | Start timestamp of the current loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.2.1.2 | ColumnfsFmLBStatsEndTimestamp | read-only | current | End timestamp of the current loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.2.1.3 | ColumnfsFmLBStatsTxCount | read-only | current | Statistics of number of Test packets transmitted during last loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.2.1.4 | ColumnfsFmLBStatsRxCount | read-only | current | Statistics of number of Test packets received during last loopback test. |
| 1.3.6.1.4.1.10876.101.1.122.3.2.1.5 | ColumnfsFmLBStatsMatchCount | read-only | current | Statistics of number of Test packets that matched with the test pattern sent. |
| 1.3.6.1.4.1.10876.101.1.122.4 | NodefsFmVarRetrieval | |||
| 1.3.6.1.4.1.10876.101.1.122.4.1 | TablefsFmVarRetrievalTable | not-accessible | current | This table contains objects to configure MIB variable requests to be sent and clear variable response table |
| 1.3.6.1.4.1.10876.101.1.122.4.1.1 | RowfsFmVarRetrievalEntry | not-accessible | current | This table contains the list of Branch and Leaves to be sent out for a Variable Request |
| 1.3.6.1.4.1.10876.101.1.122.4.1.1.1 | ColumnfsFmVarRetrievalMaxVar | read-write | current | This attribute specifies the maximum number of Variable descriptors that can be sent on the interface |
| 1.3.6.1.4.1.10876.101.1.122.4.1.1.2 | ColumnfsFmVarRetrievalRequest | read-write | current | This attribute specifies the Variable descriptor string that will be sent in the Variable Request OAMPDU. Setting this attribute also sends the variable reques… |
| 1.3.6.1.4.1.10876.101.1.122.4.1.1.3 | ColumnfsFmVarRetrievalClearResponse | read-write | current | This attribute clears the variable response log on the specified interface. Writing 'clearResponseLog' to this variable cause the 'fsFmVarResponseTable' to be … |
| 1.3.6.1.4.1.10876.101.1.122.4.3 | TablefsFmVarResponseTable | not-accessible | current | This table contains the log of the Variable responses received |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1 | RowfsFmVarResponseEntry | not-accessible | current | This table contains the list of Variable responses received on each interface. If the response is too long, it is split and stored in multiple parts |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1.1 | ColumnfsFmVarResponseId | not-accessible | current | An arbitrary integer for identifiying more than one Response received on an interface |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1.2 | ColumnfsFmVarResponseRx1 | read-only | current | This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1.3 | ColumnfsFmVarResponseRx2 | read-only | current | This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1.4 | ColumnfsFmVarResponseRx3 | read-only | current | This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1.5 | ColumnfsFmVarResponseRx4 | read-only | current | This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1.6 | ColumnfsFmVarResponseRx5 | read-only | current | This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored |
| 1.3.6.1.4.1.10876.101.1.122.4.3.1.7 | ColumnfsFmVarResponseRx6 | read-only | current | This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored |