FORCE10-COPY-CONFIG-MIB
33 objects
Dell Networking OS Copy Config MIB provides copying of running-config to to startup-config and vice-versa, and Dell Networking OS files to local disk or other system via ftp or tftp.
Imported Objects
| FORCE10-SMI | f10Mgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6027.3.5 | Identityf10CopyConfigMib | Dell Networking OS Copy Config MIB provides copying of running-config to to startup-config and vice-versa, and Dell Networking OS files to local disk or other … | ||
| 1.3.6.1.4.1.6027.3.5.1 | Nodef10CopyConfigObjects | |||
| 1.3.6.1.4.1.6027.3.5.1.1 | Nodef10CopyConfig | |||
| 1.3.6.1.4.1.6027.3.5.1.1.1 | Tablef10CopyTable | not-accessible | current | A table of config-copy requests. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1 | Rowf10CopyEntry | not-accessible | current | A config-copy request. To use this copy on NMS, user must first query the MIB. if the query returns the result of the previous copied and there is no pending c… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.1 | ColumncopyConfigIndex | not-accessible | current | To initiate a config copy request, user should assign a positive random value as an index. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.2 | ColumncopySrcFileType | read-write | current | Specifies the type of file to copy from. if the copySrcFileType is runningConfig(2) or startupConfig(3), the default F10ConfigFileLocation is flash(1). If the … |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.3 | ColumncopySrcFileLocation | read-write | current | Specifies the location of source file. If the copySrcFileType has the value of ftosFile(1), it is expected that the copySrcFileType and copySrcFileName must al… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.4 | ColumncopySrcFileName | read-write | current | The file name (including the path, if applicable) of the file. If copySourceFileType is set to runningConfig or startupConfig, copySrcFileName is not needed. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.5 | ColumncopyDestFileType | read-write | current | Specifies the type of file to copy to. if the copyDestFileType is runningConfig(2) or startupConfig(3), the default f10DestFileLocation is flash(1). If the cop… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.6 | ColumncopyDestFileLocation | read-write | current | Specifies the location of destination file. If the copyDestFileType has the value of ftosFile(1), it is expected that the copyDestFileType and copyDestFileName… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.7 | ColumncopyDestFileName | read-write | current | Specifies the location of destination file. If the copyDestFileType has the value of ftosFile(1), it is expected that the f10CopyDestFileTyp and copyDestFileLo… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.8 | ColumncopyServerAddress | read-write | deprecated | The ip address of the tftp server from (or to) which to copy the configuration file. Values of 0.0.0.0 or FF.FF.FF.FF for copyServerAddress are not allowed. If… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.9 | ColumncopyUserName | read-write | current | Remote user name for copy via ftp, or scp. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServer… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.10 | ColumncopyUserPassword | read-write | current | Password used by ftp, scp for copying a file to an ftp/scp server. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login info… |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.11 | ColumncopyState | read-only | current | The state of config-copy operation. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.12 | ColumncopyTimeStarted | read-only | current | The timetick when the copy started. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.13 | ColumncopyTimeCompleted | read-only | current | The timetick when the copy completed. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.14 | ColumncopyFailCause | read-only | current | The reason a config-copy request failed. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.15 | ColumncopyEntryRowStatus | read-write | current | The state of the copy operation. Uses CreateAndGo when you are performing the copy. The state is set to active when the copy is completed. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.16 | ColumncopyServerInetAddressType | read-write | current | The address type of copyServerInetAddress. Only ipv4 (1), ipv6 (2) and dns (16) types are supported. |
| 1.3.6.1.4.1.6027.3.5.1.1.1.1.17 | ColumncopyServerInetAddress | read-write | current | The IP address of the address ftp/tftp/scp server from or to which to copy the configuration file. If the copyDestFileLocation has the value of ftp(4) or scp(5… |
| 1.3.6.1.4.1.6027.3.5.1.2 | Nodef10CopyConfigTraps | |||
| 1.3.6.1.4.1.6027.3.5.1.2.0 | NodecopyAlarmMibNotifications | |||
| 1.3.6.1.4.1.6027.3.5.1.2.0.1 | NotificationcopyConfigCompleted | current | The agent generate this trap when a copy operational is completed. | |
| 1.3.6.1.4.1.6027.3.5.1.2.0.2 | NotificationconfigConflict | current | The agent generate this trap when a configuration conflict found during audit. | |
| 1.3.6.1.4.1.6027.3.5.1.2.0.3 | NotificationconfigConflictClear | current | The agent generate this trap when a configuration conflict resolved during audit. | |
| 1.3.6.1.4.1.6027.3.5.1.2.0.4 | NotificationbatchConfigCommitProgress | current | The agent generate this trap when a configuration commit is initiated. | |
| 1.3.6.1.4.1.6027.3.5.1.2.0.5 | NotificationbatchConfigCommitCompleted | current | The agent generate this trap when a configuration commit is completed. | |
| 1.3.6.1.4.1.6027.3.5.1.2.1 | NodecopyAlarmVariable | |||
| 1.3.6.1.4.1.6027.3.5.1.2.1.1 | ScalarcopyAlarmLevel | accessible-for-notify | current | the message warning level |
| 1.3.6.1.4.1.6027.3.5.1.2.1.2 | ScalarcopyAlarmString | accessible-for-notify | current | An generic string value in the TRAP object |
| 1.3.6.1.4.1.6027.3.5.1.2.1.3 | ScalarcopyAlarmIndex | accessible-for-notify | current | the index of the current copy. Indicates the index of the current copy, i.e. copyConfigIndex of f10CopyTable. Set to '-1' if copy executed by CLI |