FORCE10-MSTP-MIB
89 objects
The MIB module for managing devices that support Multiple & Rapid Spanning Trees Protocol and algorithm. It is dedicated to reflect IEEE Std 802.1s. Note: This contains the MIB objects defined in MSTP-MIB of ruzin-mstp-mib-02.txt.
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBridge Timeout |
| FORCE10-SMI | f10Experiment |
| Q-BRIDGE-MIB | VlanId |
| RFC1213-MIB | mib-2 |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6027.20.2 | Identityf10Mstp | The MIB module for managing devices that support Multiple & Rapid Spanning Trees Protocol and algorithm. It is dedicated to reflect IEEE Std 802.1s. Note: This… | ||
| 1.3.6.1.4.1.6027.20.2.0 | NodemstpTraps | |||
| 1.3.6.1.4.1.6027.20.2.0.1 | NotificationmstpNewRootBridge | current | The mstpNewRootBridge trap indicates that the sending agent has become the new root of the Spanning Tree in the CIST or in any MSTI; the trap is sent by a brid… | |
| 1.3.6.1.4.1.6027.20.2.0.2 | NotificationmstpNewRootPort | current | The mstpNewRootPort trap indicates that the sending agent has changed the root Port of the Spanning Tree in the CIST or in any MSTI. If the instance has become… | |
| 1.3.6.1.4.1.6027.20.2.0.3 | NotificationmstpTopologyChange | current | A mstpTopologyChange trap is sent by a bridge when any of its configured ports n any instance (CIST or MSTI) transitions from the Learning state to the Forward… | |
| 1.3.6.1.4.1.6027.20.2.10 | NodemstpGen | |||
| 1.3.6.1.4.1.6027.20.2.10.2 | ScalarmstpGenBridgeMaxAge | read-write | current | 12.8.1.3.a) |
| 1.3.6.1.4.1.6027.20.2.10.3 | ScalarmstpGenBridgeHelloTime | read-write | current | 12.8.1.3.b) |
| 1.3.6.1.4.1.6027.20.2.10.4 | ScalarmstpGenBridgeForwardDelay | read-write | current | 12.8.1.3.c) |
| 1.3.6.1.4.1.6027.20.2.10.8 | ScalarmstpGenMaxAge | read-only | current | 12.8.1.3.a) |
| 1.3.6.1.4.1.6027.20.2.10.9 | ScalarmstpGenHelloTime | read-only | current | 12.8.1.3.b) |
| 1.3.6.1.4.1.6027.20.2.10.10 | ScalarmstpGenForwardDelay | read-only | current | 12.8.1.3.c) |
| 1.3.6.1.4.1.6027.20.2.10.14 | ScalarmstpGenMaxHops | read-write | current | 13.22.f) |
| 1.3.6.1.4.1.6027.20.2.10.15 | ScalarmstpGenHoldTime | read-write | current | . |
| 1.3.6.1.4.1.6027.20.2.10.16 | ScalarmstpGenMigrateTime | read-write | current | 13.22.d) |
| 1.3.6.1.4.1.6027.20.2.10.18 | ScalarmstpGenPathCostDefault | read-write | current | (Copied from draft-ietf-bridge-rstpmib-02.txt). The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of pathCostDefa… |
| 1.3.6.1.4.1.6027.20.2.10.19 | ScalarmstpGenCapable | read-only | current | An indication of wheter the Bridge supports 'maximum' level Spanning Tree Protocol. The value nonStp(0) indicates, the Bridge doesn't support any Spanning Tree… |
| 1.3.6.1.4.1.6027.20.2.10.20 | ScalarmstpGenForceVersion | read-write | current | The value forceNonStp(0) indicates, the Spanning Tree Protocol is disabled on the Bridge (or the Spanning Tree Protocol Emulation operates). Other possible val… |
| 1.3.6.1.4.1.6027.20.2.10.30 | ScalarmstpGenCfgIdFmtSel | read-write | current | Configuration Identificator Format Selector. |
| 1.3.6.1.4.1.6027.20.2.10.31 | ScalarmstpGenCfgIdName | read-write | current | The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. |
| 1.3.6.1.4.1.6027.20.2.10.32 | ScalarmstpGenCfgIdRevLevel | read-write | current | This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier. |
| 1.3.6.1.4.1.6027.20.2.10.33 | ScalarmstpGenCfgIdDigest | read-only | current | Configuration Digest. |
| 1.3.6.1.4.1.6027.20.2.10.34 | ScalarmstpGenReginalRoot | read-only | current | ... of CIST. |
| 1.3.6.1.4.1.6027.20.2.10.35 | ScalarmstpGenExternalRootCost | read-only | current | ... of CIST. |
| 1.3.6.1.4.1.6027.20.2.11 | TablemstpPortTable | not-accessible | current | A table that contains generic information about every port that is associated with this bridge. |
| 1.3.6.1.4.1.6027.20.2.11.1 | RowmstpPortEntry | not-accessible | current | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.6027.20.2.11.1.1 | ColumnmstpPortIndex | read-only | current | A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity… |
| 1.3.6.1.4.1.6027.20.2.11.1.2 | ColumnmstpPortAdminMACEnable | read-write | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.3 | ColumnmstpPortOperMACEnable | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.4 | ColumnmstpPortUpTime | read-only | current | The value of sysUpTime at the time when the Port has been enabled by mstpPortAdminMACEnable or linked last time. |
| 1.3.6.1.4.1.6027.20.2.11.1.5 | ColumnmstpPortAdminExternalPathCost | read-write | current | The administrative value of the External Port Cost parameter. The value 0 means, that Port Cost will be selected automatically in correspondence with the speed… |
| 1.3.6.1.4.1.6027.20.2.11.1.6 | ColumnmstpPortOperExternalPathCost | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.7 | ColumnmstpPortAdminEdge | read-write | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.8 | ColumnmstpPortOperEdge | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.9 | ColumnmstpPortAutoEdge | read-write | current | (From IEEE Std 8021D). Optional. |
| 1.3.6.1.4.1.6027.20.2.11.1.10 | ColumnmstpPortAdminPointToPoint | read-write | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.11 | ColumnmstpPortOperPointToPoint | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.12 | ColumnmstpPortHelloTime | read-write | current | . |
| 1.3.6.1.4.1.6027.20.2.11.1.13 | ColumnmstpPortAdminNonStp | read-write | current | Ports with this object set to true(1) do not participate in any STP computation; they are always in Forwarding state, do not send BPDU and all received on thes… |
| 1.3.6.1.4.1.6027.20.2.11.1.14 | ColumnmstpPortProtocolMigration | read-write | current | Reflects 'mcheck' - 'Force BPDU Migration Check' management operation, which is executes, when this object is being set to true(1). The value false(2) in SET o… |
| 1.3.6.1.4.1.6027.20.2.11.1.15 | ColumnmstpPortRxTcnBpduCounter | read-only | current | Received Topology Change Notification (TCN) Messages. |
| 1.3.6.1.4.1.6027.20.2.11.1.16 | ColumnmstpPortRxCfgBpduCounter | read-only | current | Received Configuration BPDUs (IEEE Std 802.1d-1998). |
| 1.3.6.1.4.1.6027.20.2.11.1.17 | ColumnmstpPortRxRstBpduCounter | read-only | current | Received RST BPDUs IEEE Std 802.1w-2001. |
| 1.3.6.1.4.1.6027.20.2.11.1.18 | ColumnmstpPortRxMstBpduCounter | read-only | current | Received MST BPDUs IEEE Std 802.1s. |
| 1.3.6.1.4.1.6027.20.2.11.1.19 | ColumnmstpPortTxTcnBpduCounter | read-only | current | Transmitted Topology Change Notification (TCN) Messages. |
| 1.3.6.1.4.1.6027.20.2.11.1.20 | ColumnmstpPortTxCfgBpduCounter | read-only | current | Transmitted Configuration BPDUs (IEEE Std 802.1d-1998). |
| 1.3.6.1.4.1.6027.20.2.11.1.21 | ColumnmstpPortTxRstBpduCounter | read-only | current | Transmitted RST BPDUs IEEE Std 802.1w-2001. |
| 1.3.6.1.4.1.6027.20.2.11.1.22 | ColumnmstpPortTxMstBpduCounter | read-only | current | Transmitted MST BPDUs IEEE Std 802.1s. |
| 1.3.6.1.4.1.6027.20.2.12 | TablemstpMapTable | not-accessible | current | MST Configuration table (VID=>MSTID translation): allocates each and every possible VLAN to CST or a specific MSTI. |
| 1.3.6.1.4.1.6027.20.2.12.1 | RowmstpMapEntry | not-accessible | current | MST Configuration table (VID=>MSTID translation): allocates each and every possible VLAN to CST or a specific MSTI. |
| 1.3.6.1.4.1.6027.20.2.12.1.1 | ColumnmstpMapMSTiID | not-accessible | current | . |
| 1.3.6.1.4.1.6027.20.2.12.1.2 | ColumnmstpMapVlanRangeIndex | not-accessible | current | Signifies the index to the VLAN range entry in the table. |
| 1.3.6.1.4.1.6027.20.2.12.1.3 | ColumnmstpMapVlanMin | read-create | current | . |
| 1.3.6.1.4.1.6027.20.2.12.1.4 | ColumnmstpMapVlanMax | read-create | current | . |
| 1.3.6.1.4.1.6027.20.2.12.1.9 | ColumnmstpMapRowStatus | read-create | current | The status of the row as per SNMP-v2. |
| 1.3.6.1.4.1.6027.20.2.13 | TablemstpXstTable | not-accessible | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1 | RowmstpXstEntry | not-accessible | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.1 | ColumnmstpXstId | read-only | current | 0 means CIST. |
| 1.3.6.1.4.1.6027.20.2.13.1.2 | ColumnmstpXstBridgePriority | read-write | current | Bridge priority, in steps of 4096. |
| 1.3.6.1.4.1.6027.20.2.13.1.3 | ColumnmstpXstBridgeId | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.4 | ColumnmstpXstDesignatedRoot | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.5 | ColumnmstpXstDesignatedBridge | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.6 | ColumnmstpXstInternalRootCost | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.7 | ColumnmstpXstRootPort | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.8 | ColumnmstpXstMasterPort | read-only | current | Non zero value may not be in CIST. |
| 1.3.6.1.4.1.6027.20.2.13.1.11 | ColumnmstpXstTimeSinceTopologyChange | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.12 | ColumnmstpXstTopologyChangesCount | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.13.1.13 | ColumnmstpXstTopologyChangeFlag | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14 | TablemstpXstPortTable | not-accessible | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1 | RowmstpXstPortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.1 | ColumnmstpXstPortXstId | not-accessible | current | 0 means CIST. |
| 1.3.6.1.4.1.6027.20.2.14.1.2 | ColumnmstpXstPortIndex | read-only | current | The value of mstpPortIndex of the Port in mstpPortTable. |
| 1.3.6.1.4.1.6027.20.2.14.1.3 | ColumnmstpXstPortState | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.4 | ColumnmstpXstPortRole | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.6 | ColumnmstpXstPortDesignatedRoot | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.7 | ColumnmstpXstPortExternalRootCost | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.8 | ColumnmstpXstPortRegionalBridge | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.9 | ColumnmstpXstPortInternalRootCost | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.10 | ColumnmstpXstPortDesignatedBridge | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.14 | ColumnmstpXstPortDesignatedPort | read-only | current | . |
| 1.3.6.1.4.1.6027.20.2.14.1.15 | ColumnmstpXstPortPriority | read-write | current | Port priority, in steps of 16. |
| 1.3.6.1.4.1.6027.20.2.14.1.16 | ColumnmstpXstPortAdminInternalPathCost | read-write | current | The value 0 means, that the cost will be selected automatically. |
| 1.3.6.1.4.1.6027.20.2.14.1.17 | ColumnmstpXstPortOperInternalPathCost | read-only | current | . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BpduCounter | Counter32 | current | An optional counter of received or transmitted Bridge Protocol Data Units of different types on/from a Port. If the agent does not support these counter, it returns the value 0. These counters are reset when the protoco… |
| MstiInstanceIndex | Integer32 (1..64) | current | A unique value, greater than zero, for each Multiple Spanning Tree Instance (MSTI) in the managed Bridge. The value for each MstiInstanceIndex remains constant for the instance. The |
| MstiOrCistInstanceIndex | Integer32 (0..64) | current | This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST). |
| PortId | OCTET STRING (SIZE (2)) | current | The Port Identifier of the Port, the unique Port identifier comprising two parts, the Port Number and the Port Priority field (13.24.8 of IEEE Std 802.1s, 8.5.5.1 and 17.18.16 of IEEE Std 802.1D, 1998 Edition). |
| PortIndex | INTEGER (1..4094) | current | A unique value, greater than zero, for each Port in the managed Bridge. The value for each PortIndex remain constant at least from one re-initialization of the entity's network management system to the next re-initializ… |
| PortIndexOrZero | Integer32 (0..2147483647) | current | This textual convention is an extension of the PortIndex convention. The latter defines a greater than zero value used to identify a Port in the managed Bridge. This extension permits the additional value of zero. the v… |