FORCE10-SYSTEM-COMPONENT-MIB
60 objects
Dell Networking OS System component MIB. Dell Networking OS System component allow user to view the SW information of a component in the system. Currently, the available component information that are avaibale are 1) CAM Entries on linecard - Overall system CAM usage table - L2 Ingress or Egress CAM Usage - L3 Ingress or Egress CAM Usage - L3Ext Table CAM Usage (Specific to S-series L3 tables-Broadcom pltforms)
Imported Objects
| FORCE10-SMI | f10Mgmt |
| FORCE10-TC | F10CamPartitionType |
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6027.3.7 | Identityf10SysComponentMib | Dell Networking OS System component MIB. Dell Networking OS System component allow user to view the SW information of a component in the system. Currently, the… | ||
| 1.3.6.1.4.1.6027.3.7.1 | Nodef10SysComponentObjects | |||
| 1.3.6.1.4.1.6027.3.7.1.1 | Nodef10CamEntries | |||
| 1.3.6.1.4.1.6027.3.7.1.1.1 | TablecamUsageTable | not-accessible | current | A table of general CAM usages table. |
| 1.3.6.1.4.1.6027.3.7.1.1.1.1 | RowcamUsageEntry | not-accessible | current | A table of CAM usage table. The table show the different partition of CAM |
| 1.3.6.1.4.1.6027.3.7.1.1.1.1.1 | ColumncamUsageSlot | not-accessible | current | The slot number of linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.1.1.2 | ColumncamUsagePipeNum | not-accessible | current | The port pipe number on the linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.1.1.3 | ColumncamUsagePartId | not-accessible | current | The partition id of the CAM on the line card. |
| 1.3.6.1.4.1.6027.3.7.1.1.1.1.4 | ColumncamUsagePartDesc | read-only | current | The description of the CAM partition id. |
| 1.3.6.1.4.1.6027.3.7.1.1.1.1.5 | ColumncamUsageTotal | read-only | current | The total cam size allocated to this CAM partition |
| 1.3.6.1.4.1.6027.3.7.1.1.1.1.6 | ColumncamUsageUsed | read-only | current | The total cam used or configured to this CAM partition |
| 1.3.6.1.4.1.6027.3.7.1.1.2 | TablecamUsageL2Table | not-accessible | current | A table of Layer 2 or switch layer CAM usages table. |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1 | RowcamUsageL2Entry | not-accessible | current | A table of Layer 2 (switch layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress. |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.1 | ColumncamUsageL2Slot | not-accessible | current | The slot number of linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.2 | ColumncamUsageL2PipeId | not-accessible | current | The port pipe number on the linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.3 | ColumncamUsageL2IngAclTotal | read-only | current | The total cam size allocated to layer 2 ingress ACL |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.4 | ColumncamUsageL2IngAclUsed | read-only | current | The total cam used or configured in layer 2 ingress ACL |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.7 | ColumncamUsageL2IngFibTotal | read-only | current | The total cam size allocated to layer 2 ingress FIB |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.8 | ColumncamUsageL2IngFibUsed | read-only | current | The total cam used or configured in layer 2 ingress FIB |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.9 | ColumncamUsageL2EgrAclTotal | read-only | current | The total cam size allocated to layer 2 Egress ACL |
| 1.3.6.1.4.1.6027.3.7.1.1.2.1.10 | ColumncamUsageL2EgrAclUsed | read-only | current | The total cam used or configured in layer 2 Egress Acl |
| 1.3.6.1.4.1.6027.3.7.1.1.3 | TablecamUsageL3Table | not-accessible | current | A table of Layer 3 or router layer CAM usages table. |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1 | RowcamUsageL3Entry | not-accessible | current | A table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress. |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.1 | ColumncamUsageL3Slot | not-accessible | current | The slot number of linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.2 | ColumncamUsageL3PipeId | not-accessible | current | The port pipe number on the linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.3 | ColumncamUsageL3IngFibTotal | read-only | current | The total cam size allocated to layer 3 ingress FIB |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.4 | ColumncamUsageL3IngFibUsed | read-only | current | The total cam used or configured in layer 3 ingress FIB |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.5 | ColumncamUsageL3IngSysFlowTotal | read-only | current | The total cam size allocated to layer 3 ingress system flow |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.6 | ColumncamUsageL3IngSysFlowUsed | read-only | current | The total cam used or configured in layer 3 ingress system flow |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.7 | ColumncamUsageL3IngTrcListTotal | read-only | current | The total cam size allocated to layer 3 ingress trace list |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.8 | ColumncamUsageL3IngTrcListUsed | read-only | current | The total cam used or configured in layer 3 ingress trace list |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.9 | ColumncamUsageL3IngMcastFibTotal | read-only | current | The total cam size allocated to layer 3 ingress multicast FIB |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.10 | ColumncamUsageL3IngMcastFibUsed | read-only | current | The total cam used or configured in layer 3 ingress multicast FIB |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.11 | ColumncamUsageL3IngQosTotal | read-only | current | The total cam size allocated to layer 3 ingress QOS |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.12 | ColumncamUsageL3IngQosUsed | read-only | current | The total cam used or configured in layer 3 ingress QOS |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.13 | ColumncamUsageL3IngPbrTotal | read-only | current | The total cam size allocated to layer 3 ingress PBR |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.14 | ColumncamUsageL3IngPbrUsed | read-only | current | The total cam used or configured in layer 3 ingress QOS |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.15 | ColumncamUsageL3IngAclTotal | read-only | current | The total cam size allocated to layer 3 ingress ACL |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.16 | ColumncamUsageL3IngAclUsed | read-only | current | The total cam used or configured in layer 3 ingress ACL |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.17 | ColumncamUsageL3EgrAclTotal | read-only | current | The total cam size allocated to layer 3 egress ACL |
| 1.3.6.1.4.1.6027.3.7.1.1.3.1.18 | ColumncamUsageL3EgrAclUsed | read-only | current | The total cam used or configured in layer 3 egress ACL |
| 1.3.6.1.4.1.6027.3.7.1.1.4 | TablecamUsageL3ExtTable | not-accessible | current | A table of Layer 3 or router layer CAM usages table based on BCM pltform. |
| 1.3.6.1.4.1.6027.3.7.1.1.4.1 | RowcamUsageL3ExtEntry | not-accessible | current | A table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM/Table based on BCM architecture. |
| 1.3.6.1.4.1.6027.3.7.1.1.4.1.1 | ColumncamUsageL3ExtSlot | not-accessible | current | The slot number of linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.4.1.2 | ColumncamUsageL3ExtPipeId | not-accessible | current | The port pipe number on the linecard where the CAM is located |
| 1.3.6.1.4.1.6027.3.7.1.1.4.1.3 | ColumncamUsageL3ExtHostTotal | read-only | current | The total cam size allocated to layer 3 Host table. Host table is shared by IPv4,IPv6 unicast host route entries (ARP) and IPv4,IPv6 Multicast entries. The usa… |
| 1.3.6.1.4.1.6027.3.7.1.1.4.1.4 | ColumncamUsageL3ExtHostUsed | read-only | current | The total cam used in layer 3 Host table. As Host table is shared by IPv4,Ipv6 unicast host route entries and IPv4,IPv6 Multicast entries. The usage reflects s… |
| 1.3.6.1.4.1.6027.3.7.1.1.4.1.5 | ColumncamUsageL3ExtLPMTotal | read-only | current | The total cam size allocated to layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,IPv6 unicast route entries. |
| 1.3.6.1.4.1.6027.3.7.1.1.4.1.6 | ColumncamUsageL3ExtLPMUsed | read-only | current | The total cam size used in layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,Ipv6 unicast route entries.The usage reflects sum of IPv4 and v6… |
| 1.3.6.1.4.1.6027.3.7.1.2 | Nodef10SysComponentTrap | |||
| 1.3.6.1.4.1.6027.3.7.1.2.0 | NodesysCompAlarmMibNotifications | |||
| 1.3.6.1.4.1.6027.3.7.1.2.0.1 | NotificationcamUsageThresholdExceed | current | The agent generate this trap when the cam usage for a partition is exceeded. | |
| 1.3.6.1.4.1.6027.3.7.1.2.0.2 | NotificationcamIsFull | current | The agent generate this trap when the cam is fully used. | |
| 1.3.6.1.4.1.6027.3.7.1.2.0.3 | NotificationcamAuditError | current | The agent generate this trap when a cam entry mismatches with the Software entry. | |
| 1.3.6.1.4.1.6027.3.7.1.2.1 | NodesysCompAlarmVariable | |||
| 1.3.6.1.4.1.6027.3.7.1.2.1.1 | ScalarsysCompAlarmLevel | accessible-for-notify | current | the message warning level |
| 1.3.6.1.4.1.6027.3.7.1.2.1.2 | ScalarsysCompAlarmVarString | accessible-for-notify | current | An generic string value in the TRAP object |
| 1.3.6.1.4.1.6027.3.7.1.2.1.3 | ScalarsysCompSlotId | accessible-for-notify | current | The associated LineCard in the TRAP object |
| 1.3.6.1.4.1.6027.3.7.1.2.1.4 | ScalarsysCompPortPipe | accessible-for-notify | current | The associated port pipe in the TRAP object |
| 1.3.6.1.4.1.6027.3.7.1.2.1.5 | ScalarsysCompCamPartId | accessible-for-notify | current | The associated CAM partion name in the TRAP object |