FORCEPOINT-NGFW-ENGINE-MIB
193 objects
Top level enterprise MIB for Forcepoint NGFW
Imported Objects
| HCNUM-TC | CounterBasedGauge64 |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressIPv6 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.47565.1.1 | IdentityforcepointNGFWEngineMib | Top level enterprise MIB for Forcepoint NGFW | ||
| 1.3.6.1.4.1.47565.1.1.0 | NodeengineNotifications | |||
| 1.3.6.1.4.1.47565.1.1.0.1 | NotificationfwPolicyInstall | current | A firewall policy was (re)installed | |
| 1.3.6.1.4.1.47565.1.1.0.2 | NotificationnodeOnline | current | A node has gone to an online state | |
| 1.3.6.1.4.1.47565.1.1.0.3 | NotificationnodeOffline | current | A node has gone to an offline or standby state | |
| 1.3.6.1.4.1.47565.1.1.0.4 | NotificationnodeBoot | current | A node has booted up | |
| 1.3.6.1.4.1.47565.1.1.0.5 | NotificationnodeShutdown | current | A node is shutting down | |
| 1.3.6.1.4.1.47565.1.1.0.6 | NotificationnodeUserLogin | current | A user has started a login session | |
| 1.3.6.1.4.1.47565.1.1.0.7 | NotificationnodeFailedUserLogin | current | Failed user login | |
| 1.3.6.1.4.1.47565.1.1.0.8 | NotificationnodeUserLogout | current | A user has finished session | |
| 1.3.6.1.4.1.47565.1.1.0.9 | NotificationnodeTestFailure | current | NodeTest has failed | |
| 1.3.6.1.4.1.47565.1.1.0.10 | NotificationnodeHwmon | current | Hardware monitoring system has detected problems | |
| 1.3.6.1.4.1.47565.1.1.1 | NodeengineObjects | |||
| 1.3.6.1.4.1.47565.1.1.1.1 | ScalarfwSoftwareVersion | read-only | current | Version string of the firewall software |
| 1.3.6.1.4.1.47565.1.1.1.2 | ScalarfwSecurityPolicy | read-only | current | Name of the current security policy on the firewall |
| 1.3.6.1.4.1.47565.1.1.1.3 | ScalarfwPolicyTime | read-only | current | The time when the security policy was installed to the firewall |
| 1.3.6.1.4.1.47565.1.1.1.4 | ScalarfwConnNumber | read-only | current | Number of current connections |
| 1.3.6.1.4.1.47565.1.1.1.5 | ScalarfwAccepted | read-only | current | Number of accepted packets |
| 1.3.6.1.4.1.47565.1.1.1.6 | ScalarfwDropped | read-only | current | Number of dropped packets |
| 1.3.6.1.4.1.47565.1.1.1.7 | ScalarfwLogged | read-only | current | Number of logged packets |
| 1.3.6.1.4.1.47565.1.1.1.8 | ScalarfwAccounted | read-only | current | Number of accounted packets |
| 1.3.6.1.4.1.47565.1.1.1.9 | ScalarfwRejected | read-only | current | Number of rejected packets |
| 1.3.6.1.4.1.47565.1.1.1.10 | TablefwIfStatsTable | not-accessible | current | This table contains an entry for each interface in system |
| 1.3.6.1.4.1.47565.1.1.1.10.1 | RowfwIfStatsEntry | not-accessible | current | Row for an interface |
| 1.3.6.1.4.1.47565.1.1.1.10.1.1 | ColumnfwIfStatsIndex | not-accessible | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. |
| 1.3.6.1.4.1.47565.1.1.1.10.1.2 | ColumnfwIfName | read-only | current | Name of interface |
| 1.3.6.1.4.1.47565.1.1.1.10.1.3 | ColumnfwIfAcceptedPkts | read-only | current | Number of accepted packets by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.4 | ColumnfwIfDroppedPkts | read-only | current | Number of dropped packets by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.5 | ColumnfwIfLoggedPkts | read-only | current | Number of logged packets by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.6 | ColumnfwIfAccountedPkts | read-only | current | Number of accounted packets by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.7 | ColumnfwIfRejectedPkts | read-only | current | Number of rejected packets by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.8 | ColumnfwIfAcceptedBytes | read-only | current | Number of accepted bytes by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.9 | ColumnfwIfDroppedBytes | read-only | current | Number of dropped bytes by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.10 | ColumnfwIfLoggedBytes | read-only | current | Number of logged bytes by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.11 | ColumnfwIfAccountedBytes | read-only | current | Number of accounted bytes by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.12 | ColumnfwIfRejectedBytes | read-only | current | Number of rejected bytes by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.13 | ColumnfwIfForwardedPkts | read-only | current | Number of forwarded packets by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.14 | ColumnfwIfForwardedBytes | read-only | current | Number of forwarded bytes by firewall rules |
| 1.3.6.1.4.1.47565.1.1.1.10.1.15 | ColumnfwIfComment | read-only | current | Comment of interface |
| 1.3.6.1.4.1.47565.1.1.1.11 | NodefwHardware | |||
| 1.3.6.1.4.1.47565.1.1.1.11.1 | TablefwCpuStatsTable | not-accessible | current | This table contains an entry for each CPU in a system and total usage of all cpus. |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1 | RowfwCpuStatsEntry | not-accessible | current | Row with information about CPU usage |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.1 | ColumnfwCpuStatsId | not-accessible | current | A unique value, greater than zero, for each CPU in the managed system. First element with Id '0' is designed for total values. |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.2 | ColumnfwCpuName | read-only | current | Name of data current line concern |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.3 | ColumnfwCpuTotal | read-only | current | The total CPU load percentage |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.4 | ColumnfwCpuUser | read-only | current | The percentage of time the CPU has spent running users' processes that are not niced |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.5 | ColumnfwCpuSystem | read-only | current | The percentage of time the CPU has spent running the kernel and its processes |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.6 | ColumnfwCpuNice | read-only | current | The percentage of time the CPU has spent running users' processes that have been niced |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.7 | ColumnfwCpuIdle | read-only | current | The percentage of time the CPU was idle |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.8 | ColumnfwCpuIoWait | read-only | current | The percentage of time the CPU has been waiting for I/O to complete |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.9 | ColumnfwCpuHwIrq | read-only | current | The percentage of time the CPU has been servicing hardware interrupts |
| 1.3.6.1.4.1.47565.1.1.1.11.1.1.10 | ColumnfwCpuSoftIrq | read-only | current | The percentage of time the CPU has been servicing software interrupts |
| 1.3.6.1.4.1.47565.1.1.1.11.2 | NodefwMemoryInfo | |||
| 1.3.6.1.4.1.47565.1.1.1.11.2.1 | ScalarfwSwapBytesTotal | read-only | current | Total swap space |
| 1.3.6.1.4.1.47565.1.1.1.11.2.2 | ScalarfwSwapBytesUsed | read-only | current | Used space of swap |
| 1.3.6.1.4.1.47565.1.1.1.11.2.3 | ScalarfwSwapBytesUnused | read-only | current | Amount of unused space of swap |
| 1.3.6.1.4.1.47565.1.1.1.11.2.4 | ScalarfwMemBytesTotal | read-only | current | Number of available bytes of physical memory |
| 1.3.6.1.4.1.47565.1.1.1.11.2.5 | ScalarfwMemBytesUsed | read-only | current | Amount of memory being in use |
| 1.3.6.1.4.1.47565.1.1.1.11.2.6 | ScalarfwMemBytesUnused | read-only | current | Amount of unused bytes of physical memory |
| 1.3.6.1.4.1.47565.1.1.1.11.2.7 | ScalarfwMemBytesBuffers | read-only | current | Amount of memory used as buffers |
| 1.3.6.1.4.1.47565.1.1.1.11.2.8 | ScalarfwMemBytesCached | read-only | current | Amount of memory used as cache |
| 1.3.6.1.4.1.47565.1.1.1.11.2.9 | ScalarfwMemBytesSReclaimable | read-only | current | Amount of reclaimable Slab memory |
| 1.3.6.1.4.1.47565.1.1.1.11.2.10 | ScalarfwMemBytesAvailable | read-only | current | Amount of memory available |
| 1.3.6.1.4.1.47565.1.1.1.11.2.11 | ScalarfwInspectionBytesUsed | read-only | current | Amount of inspection memory being used |
| 1.3.6.1.4.1.47565.1.1.1.11.2.12 | ScalarfwInspectionPercentageUsed | read-only | current | Amount of inspection memory being used as a percentage of memory given to inspection |
| 1.3.6.1.4.1.47565.1.1.1.11.3 | TablefwDiskStatsTable | not-accessible | current | Table contains an entry for each partition mounted in a system. |
| 1.3.6.1.4.1.47565.1.1.1.11.3.1 | RowfwDiskStatsEntry | not-accessible | current | Row of information concerning one partition |
| 1.3.6.1.4.1.47565.1.1.1.11.3.1.1 | ColumnfwPartitionIndex | not-accessible | current | A unique value, greater than zero, for each partition |
| 1.3.6.1.4.1.47565.1.1.1.11.3.1.2 | ColumnfwPartitionDevName | read-only | current | A unique name of a device |
| 1.3.6.1.4.1.47565.1.1.1.11.3.1.3 | ColumnfwMountPointName | read-only | current | Name of a mount point |
| 1.3.6.1.4.1.47565.1.1.1.11.3.1.4 | ColumnfwPartitionSize | read-only | current | Total size of the partition |
| 1.3.6.1.4.1.47565.1.1.1.11.3.1.5 | ColumnfwPartitionUsed | read-only | current | Amount of used space of the partition (in kilobytes) |
| 1.3.6.1.4.1.47565.1.1.1.11.3.1.6 | ColumnfwPartitionAvail | read-only | current | Information about amount of free space on partition (in kilobytes) |
| 1.3.6.1.4.1.47565.1.1.1.11.4 | ScalarfwNewConnectionsS | read-only | current | Number of new connections / second |
| 1.3.6.1.4.1.47565.1.1.1.11.5 | ScalarfwDiscardedConnectionsS | read-only | current | Number of discarded connections / second |
| 1.3.6.1.4.1.47565.1.1.1.11.6 | ScalarfwRefusedConnectionsS | read-only | current | Number of refused connections / second |
| 1.3.6.1.4.1.47565.1.1.1.12 | TablefwVpnEp4Table | not-accessible | current | This table contains an entry for each IPv4 VPN end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.12.1 | RowfwVpnEp4Entry | not-accessible | current | Row for an IPv4 VPN end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.12.1.1 | ColumnfwVpnEp4Index | not-accessible | current | A unique value, greater than zero, for each end-point pair. |
| 1.3.6.1.4.1.47565.1.1.1.12.1.2 | ColumnfwVpnEp4Local | read-only | current | Local IPv4 end-point address |
| 1.3.6.1.4.1.47565.1.1.1.12.1.3 | ColumnfwVpnEp4Remote | read-only | current | Remote IPv4 end-point address |
| 1.3.6.1.4.1.47565.1.1.1.12.1.4 | ColumnfwVpnEp4RemoteType | read-only | current | The type of remote VPN end-point |
| 1.3.6.1.4.1.47565.1.1.1.12.1.5 | ColumnfwVpnEp4ReceivedBytes | read-only | current | Number of received bytes between the end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.12.1.6 | ColumnfwVpnEp4SentBytes | read-only | current | Number of sent bytes between the end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.12.1.7 | ColumnfwVpnEp4IpsecSa | read-only | current | Number of currently established IPsec SAs between the end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.13 | TablefwVpnEp6Table | not-accessible | current | This table contains an entry for each IPv6 VPN end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.13.1 | RowfwVpnEp6Entry | not-accessible | current | Row for an IPv6 VPN end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.13.1.1 | ColumnfwVpnEp6Index | not-accessible | current | A unique value, greater than zero, for each end-point pair. |
| 1.3.6.1.4.1.47565.1.1.1.13.1.2 | ColumnfwVpnEp6Local | read-only | current | Local IPv6 end-point address |
| 1.3.6.1.4.1.47565.1.1.1.13.1.3 | ColumnfwVpnEp6Remote | read-only | current | Remote IPv6 end-point address |
| 1.3.6.1.4.1.47565.1.1.1.13.1.4 | ColumnfwVpnEp6RemoteType | read-only | current | The type of remote VPN end-point |
| 1.3.6.1.4.1.47565.1.1.1.13.1.5 | ColumnfwVpnEp6ReceivedBytes | read-only | current | Number of received bytes between the end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.13.1.6 | ColumnfwVpnEp6SentBytes | read-only | current | Number of sent bytes between the end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.13.1.7 | ColumnfwVpnEp6IpsecSa | read-only | current | Number of currently established IPsec SAs between the end-point pair |
| 1.3.6.1.4.1.47565.1.1.1.14 | TablefwMbrInterfaceTable | not-accessible | current | This table contains an entry for each cellular interface in system |
| 1.3.6.1.4.1.47565.1.1.1.14.1 | RowfwMbrInterfaceEntry | not-accessible | current | Row for a cellular interface |
| 1.3.6.1.4.1.47565.1.1.1.14.1.1 | ColumnfwMbrInterfaceIndex | not-accessible | current | A unique value, greater than zero, for each cellular interface or interface sub-layer in the managed system. |
| 1.3.6.1.4.1.47565.1.1.1.14.1.2 | ColumnfwMbrName | read-only | current | Modem name |
| 1.3.6.1.4.1.47565.1.1.1.14.1.3 | ColumnfwMbrBandUsed | read-only | current | Interface band in use |
| 1.3.6.1.4.1.47565.1.1.1.14.1.4 | ColumnfwMbrSignalStrength | read-only | current | Modem signal strength in dBm |
| 1.3.6.1.4.1.47565.1.1.1.14.1.5 | ColumnfwMbrStatus | read-only | current | Status of the modem (not present, ok, warning, error, fatal error) |
| 1.3.6.1.4.1.47565.1.1.1.15 | ScalarfwDiskSerialNumber | read-only | current | Disk serial number |
| 1.3.6.1.4.1.47565.1.1.1.16 | TablefwHwTempSensorTable | not-accessible | current | This table contains an entry for each temperature sensor in system |
| 1.3.6.1.4.1.47565.1.1.1.16.1 | RowfwHwTempSensorEntry | not-accessible | current | Row for a temperature sensor |
| 1.3.6.1.4.1.47565.1.1.1.16.1.1 | ColumnfwHwTempSensorIndex | not-accessible | current | A unique value, greater than zero, for each temperature sensor |
| 1.3.6.1.4.1.47565.1.1.1.16.1.2 | ColumnfwHwTemperatureName | read-only | current | Name of the temperature sensor |
| 1.3.6.1.4.1.47565.1.1.1.16.1.3 | ColumnfwHwTemperature | read-only | current | Temperature in degrees C for the given temperature sensor |
| 1.3.6.1.4.1.47565.1.1.1.16.1.4 | ColumnfwHwTemperatureStatus | read-only | current | Status of the temperature sensor (not present, ok, warning, error, fatal error) |
| 1.3.6.1.4.1.47565.1.1.1.17 | TablefwPsuTable | not-accessible | current | This table contains an entry for each power supply unit in system |
| 1.3.6.1.4.1.47565.1.1.1.17.1 | RowfwPsuEntry | not-accessible | current | Row for a PSU |
| 1.3.6.1.4.1.47565.1.1.1.17.1.1 | ColumnfwPsuIndex | not-accessible | current | A unique value, greater than zero, for each PSU |
| 1.3.6.1.4.1.47565.1.1.1.17.1.2 | ColumnfwPsuName | read-only | current | Name of the PSU |
| 1.3.6.1.4.1.47565.1.1.1.17.1.3 | ColumnfwPsuStatus | read-only | current | Status of the PSU (not present, ok, warning, error, fatal error) |
| 1.3.6.1.4.1.47565.1.1.1.18 | TablefwFanTable | not-accessible | current | This table contains an entry for each fan in system |
| 1.3.6.1.4.1.47565.1.1.1.18.1 | RowfwFanEntry | not-accessible | current | Row for a fan |
| 1.3.6.1.4.1.47565.1.1.1.18.1.1 | ColumnfwFanIndex | not-accessible | current | A unique value, greater than zero, for each fan |
| 1.3.6.1.4.1.47565.1.1.1.18.1.2 | ColumnfwFanName | read-only | current | Fan name |
| 1.3.6.1.4.1.47565.1.1.1.18.1.3 | ColumnfwFan | read-only | current | Fan speed in RPM |
| 1.3.6.1.4.1.47565.1.1.1.18.1.4 | ColumnfwFanStatus | read-only | current | Status of the fan (not present, ok, warning, error, fatal error) |
| 1.3.6.1.4.1.47565.1.1.1.19 | NodenetNodeObjects | |||
| 1.3.6.1.4.1.47565.1.1.1.19.1 | ScalarnodeClusterId | read-only | current | The identification number of the cluster this node belongs to |
| 1.3.6.1.4.1.47565.1.1.1.19.2 | ScalarnodeMemberId | read-only | current | Node's member identification within the cluster |
| 1.3.6.1.4.1.47565.1.1.1.19.3 | ScalarnodeOperState | read-only | current | The operative (clustering) state of the node |
| 1.3.6.1.4.1.47565.1.1.1.19.4 | ScalarnodeCPULoad | read-only | current | The CPU load percentage on the node |
| 1.3.6.1.4.1.47565.1.1.1.19.5 | ScalarnodeLastLogin | read-only | current | The most recent login event on the node |
| 1.3.6.1.4.1.47565.1.1.1.19.6 | ScalarnodeLastLoginTime | read-only | current | Timestamp of the most recent login event on the node |
| 1.3.6.1.4.1.47565.1.1.1.19.7 | TablenodeTestTable | not-accessible | current | This table contains an entry for each test instance that was configured to send a trap on test failure |
| 1.3.6.1.4.1.47565.1.1.1.19.7.1 | RownodeTestEntry | not-accessible | current | Row for a test instance |
| 1.3.6.1.4.1.47565.1.1.1.19.7.1.1 | ColumnnodeTestIndex | not-accessible | current | Unique positive integer index of the nodeTest instance |
| 1.3.6.1.4.1.47565.1.1.1.19.7.1.2 | ColumnnodeTestIdentity | read-only | current | Identification string of a nodeTest |
| 1.3.6.1.4.1.47565.1.1.1.19.7.1.3 | ColumnnodeTestResult | read-only | current | The most recent result of the nodeTest |
| 1.3.6.1.4.1.47565.1.1.1.19.7.1.4 | ColumnnodeTestResultTime | read-only | current | The timestamp of the most recent result of the nodeTest |
| 1.3.6.1.4.1.47565.1.1.1.19.8 | ScalarnodeHwmonEvent | read-only | current | Reason for the hardware monitoring event |
| 1.3.6.1.4.1.47565.1.1.1.19.9 | ScalarnodeApplianceModel | read-only | current | Appliance model name |
| 1.3.6.1.4.1.47565.1.1.1.19.10 | ScalarnodePosCode | read-only | current | Appliance POS code |
| 1.3.6.1.4.1.47565.1.1.1.19.11 | ScalarnodeLoginTime | read-only | current | The most recent login event on the node |
| 1.3.6.1.4.1.47565.1.1.1.19.12 | ScalarnodePolicyApplyTime | read-only | current | The time when the security policy was installed to the node |
| 1.3.6.1.4.1.47565.1.1.1.19.13 | ScalarnodeHardwareSerialNumber | read-only | current | Hardware chassis serial number |
| 1.3.6.1.4.1.47565.1.1.1.20 | TablefwVoltageTable | not-accessible | current | This table contains an entry for each voltage in system |
| 1.3.6.1.4.1.47565.1.1.1.20.1 | RowfwVoltageEntry | not-accessible | current | Row for a voltage |
| 1.3.6.1.4.1.47565.1.1.1.20.1.1 | ColumnfwVoltageIndex | not-accessible | current | A unique value, greater than zero, for each voltage |
| 1.3.6.1.4.1.47565.1.1.1.20.1.2 | ColumnfwVoltageName | read-only | current | Voltage name |
| 1.3.6.1.4.1.47565.1.1.1.20.1.3 | ColumnfwVoltage | read-only | current | Voltage in volts |
| 1.3.6.1.4.1.47565.1.1.1.20.1.4 | ColumnfwVoltageStatus | read-only | current | Status of the voltage (not present, ok, warning, error, fatal error) |
| 1.3.6.1.4.1.47565.1.1.1.21 | TablefwVETable | not-accessible | current | This table contains an entry for each virtual engine |
| 1.3.6.1.4.1.47565.1.1.1.21.1 | RowfwVEEntry | not-accessible | current | Row for virtual engine |
| 1.3.6.1.4.1.47565.1.1.1.21.1.1 | ColumnfwVEIndex | not-accessible | current | A unique value, greater that zero, for each virtual engine. |
| 1.3.6.1.4.1.47565.1.1.1.21.1.2 | ColumnfwVEEngineId | read-only | current | Engine ID of the virtual engine |
| 1.3.6.1.4.1.47565.1.1.1.21.1.3 | ColumnfwVEName | read-only | current | Name of the virtual engine |
| 1.3.6.1.4.1.47565.1.1.1.21.1.4 | ColumnfwVEStatus | read-only | current | Status of the virtual engine e.g. Active |
| 1.3.6.1.4.1.47565.1.1.1.22 | TablefwIfStatsProcTable | not-accessible | current | This table contains an entry for each interface in system |
| 1.3.6.1.4.1.47565.1.1.1.22.1 | RowfwIfStatsProcEntry | not-accessible | current | Row for an interface |
| 1.3.6.1.4.1.47565.1.1.1.22.1.1 | ColumnfwIfStatsProcIndex | not-accessible | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. |
| 1.3.6.1.4.1.47565.1.1.1.22.1.2 | ColumnfwIfProcName | read-only | current | Name of interface. |
| 1.3.6.1.4.1.47565.1.1.1.22.1.3 | ColumnfwIfProcReceivedBytes | read-only | current | Number of good received bytes, corresponding to rx_packets. For IEEE 802.3 devices should count the length of Ethernet Frames excluding the FCS. |
| 1.3.6.1.4.1.47565.1.1.1.22.1.4 | ColumnfwIfProcReceivedPackets | read-only | current | Number of good packets received by the interface. For hardware interfaces counts all good packets received from the device by the host, including packets which… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.5 | ColumnfwIfProcReceivedErrs | read-only | current | Total number of bad packets received on this network device. This counter must include events counted by rx_length_errors, rx_crc_errors, rx_frame_errors and o… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.6 | ColumnfwIfProcReceivedDrop | read-only | current | Number of packets received but not processed, e.g. due to lack of resources or unsupported protocol. For hardware interfaces this counter may include packets d… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.7 | ColumnfwIfProcReceivedFifo | read-only | current | Historically the count of overflow events. Those events may be reported in the receive descriptors or via interrupts, and may not correspond one-to-one with dr… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.8 | ColumnfwIfProcReceivedFrame | read-only | current | Receiver frame alignment errors. Part of aggregate frame errors in /proc/net/dev. For IEEE 802.3 devices this counter should be equivalent to: - 30.3.1.1.7 aAl… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.9 | ColumnfwIfProcReceivedCompressed | read-only | current | Number of correctly received compressed packets. This counters is only meaningful for interfaces which support packet compression (e.g. CSLIP, PPP). |
| 1.3.6.1.4.1.47565.1.1.1.22.1.10 | ColumnfwIfProcReceivedMulticast | read-only | current | Multicast packets received. For hardware interfaces this statistic is commonly calculated at the device level (unlike rx_packets) and therefore may include pac… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.11 | ColumnfwIfProcTransmitBytes | read-only | current | Number of good transmitted bytes, corresponding to tx_packets. For IEEE 802.3 devices should count the length of Ethernet Frames excluding the FCS. |
| 1.3.6.1.4.1.47565.1.1.1.22.1.12 | ColumnfwIfProcTransmitPackets | read-only | current | Number of packets successfully transmitted. For hardware interfaces counts packets which host was able to successfully hand over to the device, which does not … |
| 1.3.6.1.4.1.47565.1.1.1.22.1.13 | ColumnfwIfProcTransmitErrs | read-only | current | Total number of transmit problems. This counter must include events counter by tx_aborted_errors, tx_carrier_errors, tx_fifo_errors, tx_heartbeat_errors, tx_wi… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.14 | ColumnfwIfProcTransmitDrop | read-only | current | Number of packets dropped on their way to transmission, e.g. due to lack of resources. |
| 1.3.6.1.4.1.47565.1.1.1.22.1.15 | ColumnfwIfProcTransmitFifo | read-only | current | Number of frame transmission errors due to device FIFO underrun / underflow. This condition occurs when the device begins transmission of a frame but is unable… |
| 1.3.6.1.4.1.47565.1.1.1.22.1.16 | ColumnfwIfProcTransmitColls | read-only | current | Number of collisions during packet transmissions. |
| 1.3.6.1.4.1.47565.1.1.1.22.1.17 | ColumnfwIfProcTransmitCarrier | read-only | current | Number of frame transmission errors due to loss of carrier during transmission. Part of aggregate carrier errors in /proc/net/dev. For IEEE 802.3 devices this … |
| 1.3.6.1.4.1.47565.1.1.1.22.1.18 | ColumnfwIfProcTransmitCompressed | read-only | current | Number of transmitted compressed packets. This counters is only meaningful for interfaces which support packet compression (e.g. CSLIP, PPP). |
| 1.3.6.1.4.1.47565.1.1.2 | NodeengineGroups | |||
| 1.3.6.1.4.1.47565.1.1.2.1 | GroupfirewallGeneralInformationGroup | current | A collection of objects giving general information about the firewall | |
| 1.3.6.1.4.1.47565.1.1.2.2 | GroupfirewallIfaceStatsGroup | current | A collection of objects giving information about the current firewall interface related traffic statistics | |
| 1.3.6.1.4.1.47565.1.1.2.3 | GroupfirewallGeneralStatsGroup | current | A collection of objects giving general information about the firewall traffic statistics | |
| 1.3.6.1.4.1.47565.1.1.2.4 | GroupfirewallHardwareGroup | current | A collection of objects giving information about the hardware parameters | |
| 1.3.6.1.4.1.47565.1.1.2.5 | GroupfirewallMbrInterfaceGroup | current | A collection of objects giving information about the Mbr related parameters | |
| 1.3.6.1.4.1.47565.1.1.2.6 | GroupfirewallPerformanceGroup | current | A collection of objects giving information about the performance related parameters | |
| 1.3.6.1.4.1.47565.1.1.2.7 | GroupfirewallVpnEpGroup | current | A collection of objects giving information about the configured VPN end-point pairs | |
| 1.3.6.1.4.1.47565.1.1.2.8 | GroupnodeIdentificationGroup | current | A collection of objects identifying the node in a cluster | |
| 1.3.6.1.4.1.47565.1.1.2.9 | GroupnodeStatusGroup | current | A collection of objects giving information about the status of the node | |
| 1.3.6.1.4.1.47565.1.1.2.10 | GroupnodeLoginGroup | current | A collection of objects giving information about logins into the node | |
| 1.3.6.1.4.1.47565.1.1.2.11 | GroupnodeTesterGroup | current | A collection of objects giving information about the tests in the test subsystem of the node | |
| 1.3.6.1.4.1.47565.1.1.2.12 | GroupfirewallGeneralNotifGroup | current | A collection of notification giving information about general events in the firewall | |
| 1.3.6.1.4.1.47565.1.1.2.13 | GroupnodeStatusNotificationsGroup | current | A collection of notifications informing about changes in a node's status | |
| 1.3.6.1.4.1.47565.1.1.2.14 | GroupnodeLoginNotificationsGroup | current | A collection of notifications informing about user logins | |
| 1.3.6.1.4.1.47565.1.1.2.15 | GroupnodeTesterNotificationsGroup | current | A collection of notifications informing about test failures | |
| 1.3.6.1.4.1.47565.1.1.2.16 | GroupnodeHwmonNotificationsGroup | current | A collection of notifications informing about hardware monitoring issues | |
| 1.3.6.1.4.1.47565.1.1.2.17 | GroupnodeHwmonGroup | current | A collection of objects giving information about hardware monitoring events in the node | |
| 1.3.6.1.4.1.47565.1.1.2.18 | GroupengineVEGroup | current | A collection of objects giving information about Virtual Engines in the Engine | |
| 1.3.6.1.4.1.47565.1.1.2.19 | GroupfirewallIfaceStatsProcGroup | current | A collection of objects giving information about the current firewall interface related traffic statistics |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FwFixedThousandths | Integer32 FwVoltageEntry ::= SEQUENCE { fwVoltageIndex INTEGER, fwVoltageName DisplayString, fwVoltage FwFixedThousandths, fwVoltageStatus FwHwComponentStatus } | current | Fixed point, three decimals |
| FwHwComponentStatus | INTEGER { notPresent(-1), ok(0), warning(1), error(2), fatalError(3) } | current | Operational status of the corresponding hardware component. notPresent(-1) Component is unexpectedly not present. ok(0) Component working as intended. warning(1) Component needs attention. error(2) Component is inoperat… |
| VpnEndpointType | INTEGER { unknown(0), static(1), dynamic(2), mobile(3) } | current | A value that represents the type of the remote VPN end-point. unknown(0) The type of the remote VPN end-point is not known. static(1) The remote VPN end-point has a static IP address. dynamic(2) The remote VPN end-point… |