FORTINET-FORTIAP-MIB
249 objects
MIB module for Fortinet FortiAP devices.
Imported Objects
| FORTINET-CORE-MIB | fortinet |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12356.120 | IdentityfnFortiAPMib | MIB module for Fortinet FortiAP devices. | ||
| 1.3.6.1.4.1.12356.120.0 | NodefapTraps | |||
| 1.3.6.1.4.1.12356.120.0.1 | NotificationfapDevUp | current | Indicates that the specified AP device is up. | |
| 1.3.6.1.4.1.12356.120.0.2 | NotificationfapCpuOverload | current | Indicates that the CPU usage of the specified AP has exceeded the configured threshold. | |
| 1.3.6.1.4.1.12356.120.0.3 | NotificationfapMemOverload | current | Indicates that the memory usage of the specified AP has exceeded the configured threshold. | |
| 1.3.6.1.4.1.12356.120.0.4 | NotificationfapDevDown | current | Indicates that the specified AP device is down. | |
| 1.3.6.1.4.1.12356.120.0.5 | NotificationfapAcConnected | current | Indicates that AP has connected to the specified AC. | |
| 1.3.6.1.4.1.12356.120.1 | NodefapCommon | |||
| 1.3.6.1.4.1.12356.120.1.1 | ScalarfapVersion | read-only | current | FortiAP Software Version. |
| 1.3.6.1.4.1.12356.120.1.2 | ScalarfapSerialNum | read-only | current | FortiAP Serial Number. |
| 1.3.6.1.4.1.12356.120.1.3 | ScalarfapHostName | read-only | current | Hostname of the FortiAP. |
| 1.3.6.1.4.1.12356.120.1.4 | ScalarfapRegionCode | read-only | current | Operating Region Code of the FortiAP. |
| 1.3.6.1.4.1.12356.120.1.5 | ScalarfapBaseMacAddr | read-only | current | BaseMAC Address of the FortiAP. |
| 1.3.6.1.4.1.12356.120.1.6 | ScalarfapBiosVer | read-only | current | BIOS Version of the FortiAP. |
| 1.3.6.1.4.1.12356.120.1.7 | ScalarfapBiosDataVer | read-only | current | BIOS Data Version of the FortiAP. |
| 1.3.6.1.4.1.12356.120.1.8 | ScalarfapSysPartNum | read-only | current | Hardware part number of the FortiAP. |
| 1.3.6.1.4.1.12356.120.2 | NodefapWTPConfig | |||
| 1.3.6.1.4.1.12356.120.2.1 | ScalarfapWtpWanMode | read-write | current | WAN Mode Operation. |
| 1.3.6.1.4.1.12356.120.2.2 | ScalarfapWtpApAddrMode | read-write | current | IP address Mode of the FortiAP Ethernet Interface. |
| 1.3.6.1.4.1.12356.120.2.3 | ScalarfapWtpApIpAddr | read-write | current | IP address of the FortiAP Ethernet Interface |
| 1.3.6.1.4.1.12356.120.2.4 | ScalarfapWtpApIpNetmask | read-write | current | Netmask of the FortiAP Ethernet Interface. |
| 1.3.6.1.4.1.12356.120.2.5 | ScalarfapWtpApIpGateway | read-write | current | Gateway of the FortiAP Ethernet Interface. |
| 1.3.6.1.4.1.12356.120.2.6 | ScalarfapWtpApMode | read-write | current | Operating Mode of the FortiAP. |
| 1.3.6.1.4.1.12356.120.2.7 | ScalarfapWtpApDnsAddr | read-write | current | DNS Server Address. |
| 1.3.6.1.4.1.12356.120.2.8 | ScalarfapWtpApStpMode | read-write | current | STP Operating Mode of the FortiAP. |
| 1.3.6.1.4.1.12356.120.2.9 | ScalarfapWtpApMgmtVlanID | read-write | current | Management VLAN ID of the FortiAP. |
| 1.3.6.1.4.1.12356.120.2.10 | ScalarfapWtpApAcDiscoveryType | read-write | current | AC discovery type of the FortiAP. |
| 1.3.6.1.4.1.12356.120.2.11 | ScalarfapWtpApAcAddr1 | read-write | current | IP address of the AC 1. |
| 1.3.6.1.4.1.12356.120.2.12 | ScalarfapWtpApAcAddr2 | read-write | current | IP address of the AC 2. |
| 1.3.6.1.4.1.12356.120.2.13 | ScalarfapWtpApAcAddr3 | read-write | current | IP address of the AC 3. |
| 1.3.6.1.4.1.12356.120.2.14 | ScalarfapWtpApAcHostname1 | read-write | current | Hostname of the AC 1. |
| 1.3.6.1.4.1.12356.120.2.15 | ScalarfapWtpApAcHostname2 | read-write | current | Hostname of the AC 2. |
| 1.3.6.1.4.1.12356.120.2.16 | ScalarfapWtpApAcHostname3 | read-write | current | Hostname of the AC 3. |
| 1.3.6.1.4.1.12356.120.2.17 | ScalarfapWtpAcMulticastAddr | read-write | current | Multicast Address of the AC. |
| 1.3.6.1.4.1.12356.120.2.18 | ScalarfapWtpAcDhcpCode | read-write | current | DHCP option code from AC. |
| 1.3.6.1.4.1.12356.120.2.19 | ScalarfapWtpAcFcldApCtrl | read-write | current | Forticloud AP Control server. |
| 1.3.6.1.4.1.12356.120.2.20 | ScalarfapWtpAcFcldId | read-write | current | Forticloud User ID. |
| 1.3.6.1.4.1.12356.120.2.21 | ScalarfapWtpAcFcldPassword | read-write | current | Forticloud User Password. |
| 1.3.6.1.4.1.12356.120.2.22 | ScalarfapWtpAcCtrlPort | read-write | current | CAPWAP AC Control Port. |
| 1.3.6.1.4.1.12356.120.2.23 | ScalarfapWtpAcDataChannelSecurity | read-write | current | DataChannel Security used in CAPWAP. |
| 1.3.6.1.4.1.12356.120.2.24 | ScalarfapWtpMeshApType | read-write | current | Mesh AP Type. |
| 1.3.6.1.4.1.12356.120.2.25 | ScalarfapWtpMeshSSID | read-write | current | MESH SSID to be Connected to. |
| 1.3.6.1.4.1.12356.120.2.26 | ScalarfapWtpMeshPassword | read-write | current | MESH Password to be Connected. |
| 1.3.6.1.4.1.12356.120.2.27 | ScalarfapWtpEthBridge | read-write | current | Disable/enable ethernet bridge on mesh leaf. |
| 1.3.6.1.4.1.12356.120.2.28 | ScalarfapWtpEthBridgeVlans | read-write | current | Ethernet vlan bridges on mesh leaf. |
| 1.3.6.1.4.1.12356.120.2.29 | ScalarfapLedState | read-write | current | Configured LED Mode of the FortiAP. |
| 1.3.6.1.4.1.12356.120.2.30 | ScalarfapPoeMode | read-write | current | Configured POE Mode of the FortiAP. |
| 1.3.6.1.4.1.12356.120.3 | NodefapWTPStatus | |||
| 1.3.6.1.4.1.12356.120.3.1 | ScalarfapAcDiscoveryType | read-only | current | Current AC Discovery type. |
| 1.3.6.1.4.1.12356.120.3.2 | ScalarfapCtlmsgOffload | read-only | current | Display the control messages to be offloaded. |
| 1.3.6.1.4.1.12356.120.3.3 | ScalarfapAcCertVersion | read-only | current | Operating AC certificate. |
| 1.3.6.1.4.1.12356.120.3.4 | ScalarfapPoeModeOper | read-only | current | Operating PoE Mode. |
| 1.3.6.1.4.1.12356.120.3.5 | ScalarfapLedMode | read-only | current | Operating LED State. |
| 1.3.6.1.4.1.12356.120.3.6 | ScalarfapAllowAccess | read-only | current | Control management access to the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.7 | ScalarfapLldpAccess | read-only | current | Link Layer Discovery Protocol for the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.8 | ScalarfapRadioCount | read-only | current | Total number of Radios on the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.9 | ScalarfapStationInfo | read-only | current | Connected & Allowed Stations on the FortiAP. Format x/y, x is the current station count, and y is the maximum number of stations allowed. |
| 1.3.6.1.4.1.12356.120.3.10 | ScalarfapEchoInterval | read-only | current | Time between Echo Requests sent by the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.11 | ScalarfapKeepAliveInterval | read-only | current | Time between two Keep Alive Packets sent by the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.12 | ScalarfapRetransmitMax | read-only | current | Maximum number of control packet retransmissions. |
| 1.3.6.1.4.1.12356.120.3.13 | ScalarfapDcDeadInterval | read-only | current | Data Channel Dead Interval. |
| 1.3.6.1.4.1.12356.120.3.14 | ScalarfapDiscoveryInterval | read-only | current | AC Discovery Interval. |
| 1.3.6.1.4.1.12356.120.3.15 | ScalarfapReportInterval | read-only | current | Background Scan Report Interval. |
| 1.3.6.1.4.1.12356.120.3.16 | ScalarfapStationStatsInterval | read-only | current | Time between running station stats reports. |
| 1.3.6.1.4.1.12356.120.3.17 | ScalarfapVapStatsInterval | read-only | current | Time between running vap stats reports. |
| 1.3.6.1.4.1.12356.120.3.18 | ScalarfapRadioStatsInterval | read-only | current | Time between running radio stats reports. |
| 1.3.6.1.4.1.12356.120.3.19 | ScalarfapStationCapInterval | read-only | current | Time between running station capability reports. |
| 1.3.6.1.4.1.12356.120.3.20 | ScalarfapIdleTimeout | read-only | current | Time after which a client is considered idle and timed out. |
| 1.3.6.1.4.1.12356.120.3.21 | ScalarfapStatisticsInterval | read-only | current | Staticics collect interval. |
| 1.3.6.1.4.1.12356.120.3.22 | ScalarfapFortiPresenceInterval | read-only | current | Time between running FortiPresence reports. |
| 1.3.6.1.4.1.12356.120.3.23 | ScalarfapFsmState | read-only | current | Current CAPWAP state of the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.24 | ScalarfapWtpIpAddr | read-only | current | IP address of the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.25 | ScalarfapAcIpAddr | read-only | current | IP address of the AC control channel. |
| 1.3.6.1.4.1.12356.120.3.26 | ScalarfapAcPort | read-only | current | UDP port number of the AC control channel. |
| 1.3.6.1.4.1.12356.120.3.27 | ScalarfapIpFragmentPrevent | read-only | current | Prevent IP fragmentation for CAPWAP tunneled control and data packets. |
| 1.3.6.1.4.1.12356.120.3.28 | ScalarfapAeroScout | read-only | current | AeroScout Real Time Location Service support. |
| 1.3.6.1.4.1.12356.120.3.29 | ScalarfapLanMode | read-only | current | LAN Port Mode. |
| 1.3.6.1.4.1.12356.120.3.30 | ScalarfapLanPortCount | read-only | current | Total number of LAN Ports on the FortiAP. |
| 1.3.6.1.4.1.12356.120.3.31 | ScalarfapDataChannelStatus | read-only | current | FortiAP Data Channel Status. |
| 1.3.6.1.4.1.12356.120.3.32 | ScalarfapDataChannelSecurityOper | read-only | current | Data Channel Security. |
| 1.3.6.1.4.1.12356.120.3.33 | ScalarfapFortiPresenceServer | read-only | current | IP address of the FortiPresence server. |
| 1.3.6.1.4.1.12356.120.3.34 | ScalarfapFortiPresencePort | read-only | current | UDP port number of the Forti presence server. |
| 1.3.6.1.4.1.12356.120.3.35 | ScalarfapFortiPresenceProject | read-only | current | The project name of the Forti presence server. |
| 1.3.6.1.4.1.12356.120.3.36 | ScalarfapWtpLocation | read-only | current | Physical location of the FortiAP. |
| 1.3.6.1.4.1.12356.120.4 | NodefapRadioTables | |||
| 1.3.6.1.4.1.12356.120.4.1 | TablefapRadioTable | not-accessible | current | A configuration table of device's radios |
| 1.3.6.1.4.1.12356.120.4.1.1 | RowfapRadioEntry | not-accessible | current | An entry containing information applicable to a particular virtual domain |
| 1.3.6.1.4.1.12356.120.4.1.1.1 | ColumnfapRadioIndex | not-accessible | current | Radio index number. |
| 1.3.6.1.4.1.12356.120.4.1.1.2 | ColumnfapRadioMode | read-only | current | Configured radio mode. |
| 1.3.6.1.4.1.12356.120.4.1.1.3 | ColumnfapRadioCountry | read-only | current | Radio Operating Country. |
| 1.3.6.1.4.1.12356.120.4.1.1.4 | ColumnfapRadioCountryId | read-only | current | Radio Operating Country ID. |
| 1.3.6.1.4.1.12356.120.4.1.1.5 | ColumnfapRadioStationInfo | read-only | current | Connected & Allowed Stations on the Radio. Format x/y, x is the current station count and y is the maximum number of stations allowed. |
| 1.3.6.1.4.1.12356.120.4.1.1.6 | ColumnfapRadioType | read-only | current | WiFi band Radio operates. |
| 1.3.6.1.4.1.12356.120.4.1.1.7 | ColumnfapRadioHT2040Coexist | read-only | current | Allowing both HT20 and HT40 on the same Radio. |
| 1.3.6.1.4.1.12356.120.4.1.1.8 | ColumnfapRadioBeaconInterval | read-only | current | Time between beacon frames in msec. |
| 1.3.6.1.4.1.12356.120.4.1.1.9 | ColumnfapRadioTxPowerConfig | read-only | current | Configured Tx Power of the Radio. |
| 1.3.6.1.4.1.12356.120.4.1.1.10 | ColumnfapRadioTxPowerOper | read-only | current | Operating Tx Power of the Radio. |
| 1.3.6.1.4.1.12356.120.4.1.1.11 | ColumnfapRadioTxPowerMax | read-only | current | Maximum Tx Power of the Radio. |
| 1.3.6.1.4.1.12356.120.4.1.1.12 | ColumnfapRadioChannelWidth | read-only | current | Channel bandwidth: 160, 80, 40, or 20MHz. |
| 1.3.6.1.4.1.12356.120.4.1.1.13 | ColumnfapRadioSGI | read-only | current | Short guard interval configuration. |
| 1.3.6.1.4.1.12356.120.4.1.1.14 | ColumnfapRadioChannelOper | read-only | current | Operating radio channel. |
| 1.3.6.1.4.1.12356.120.4.1.1.15 | ColumnfapRadioChannelUtil | read-only | current | Channel utilization measurement. |
| 1.3.6.1.4.1.12356.120.4.1.1.16 | ColumnfapRadioSensorMode | read-only | current | Scan WiFi nearby stations. |
| 1.3.6.1.4.1.12356.120.4.1.1.17 | ColumnfapRadioApScan | read-only | current | Rogue AP Detection. |
| 1.3.6.1.4.1.12356.120.4.1.1.18 | ColumnfapRadioApScanPeriod | read-only | current | Period of time between background scans. |
| 1.3.6.1.4.1.12356.120.4.1.1.19 | ColumnfapRadioApScanInterval | read-only | current | Period of time between scanning two channels. |
| 1.3.6.1.4.1.12356.120.4.1.1.20 | ColumnfapRadioApScanDuration | read-only | current | Listening time on a scanning channel. |
| 1.3.6.1.4.1.12356.120.4.1.1.21 | ColumnfapRadioApScanIdleTime | read-only | current | Waiting time for channel inactivity before scanning a new channel. |
| 1.3.6.1.4.1.12356.120.4.1.1.22 | ColumnfapRadioApScanReportTimer | read-only | current | Period of time between background scan reports. |
| 1.3.6.1.4.1.12356.120.4.1.1.23 | ColumnfapRadioDARRP | read-only | current | Distributed Automatic Radio Resource Provisioning. |
| 1.3.6.1.4.1.12356.120.4.1.1.24 | ColumnfapRadioSpectralAnalysis | read-only | current | Spectrum analysis to find interference. |
| 1.3.6.1.4.1.12356.120.4.1.1.25 | ColumnfapRadioWIDS | read-only | current | Wireless Intrusion Detection System Profile. |
| 1.3.6.1.4.1.12356.120.4.1.1.26 | ColumnfapRadioFortiPresence | read-only | current | FortiPresence to monitor the location and activity of WiFi clients. |
| 1.3.6.1.4.1.12356.120.4.1.1.27 | ColumnfapRadioAirFairness | read-only | current | Disable/enable air time fairness. |
| 1.3.6.1.4.1.12356.120.4.1.1.28 | ColumnfapRadioConfigChannelList | read-only | current | Configured channel list. |
| 1.3.6.1.4.1.12356.120.4.1.1.29 | ColumnfapRadioHwChannelList | read-only | current | Hareware supported channel list. |
| 1.3.6.1.4.1.12356.120.4.1.1.30 | ColumnfapRadioNolChannelList | read-only | current | Non-occupancy channel list. |
| 1.3.6.1.4.1.12356.120.7 | NodefapVapTables | |||
| 1.3.6.1.4.1.12356.120.7.1 | TablefapVapTable | not-accessible | current | A table of virtual access point configured on the device |
| 1.3.6.1.4.1.12356.120.7.1.1 | RowfapVapEntry | not-accessible | current | An entry containing information applicable \ to a particular virtual domain |
| 1.3.6.1.4.1.12356.120.7.1.1.1 | ColumnfapVapRadioId | not-accessible | current | Index number of the radio. |
| 1.3.6.1.4.1.12356.120.7.1.1.2 | ColumnfapVapWlanId | not-accessible | current | Index number of the WLAN. |
| 1.3.6.1.4.1.12356.120.7.1.1.3 | ColumnfapVapBSSID | read-only | current | BSSID of the virtual AP. |
| 1.3.6.1.4.1.12356.120.7.1.1.4 | ColumnfapVapSSID | read-only | current | SSID used by the virtual AP. |
| 1.3.6.1.4.1.12356.120.7.1.1.5 | ColumnfapVapAdmin | read-only | current | Administration Status of VAP interface. |
| 1.3.6.1.4.1.12356.120.7.1.1.6 | ColumnfapVapStatus | read-only | current | Operating Status of VAP interface. |
| 1.3.6.1.4.1.12356.120.7.1.1.7 | ColumnfapVapMeshBackhaul | read-only | current | Enable/Disable mesh backhaul on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.8 | ColumnfapVapLocalAuth | read-only | current | Enable/disable local authorization on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.9 | ColumnfapVapLocalStandAlone | read-only | current | Enable/disable local Stand Alone on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.10 | ColumnfapVapNatMode | read-only | current | Enable/Disable NAT mode on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.11 | ColumnfapVapLocalBridging | read-only | current | Enable/Disable local briding on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.12 | ColumnfapVapSplitTunnel | read-only | current | Enable/Disable split tunnel on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.13 | ColumnfapVapLanIsolation | read-only | current | Enable/Disable LAN isolation on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.14 | ColumnfapVapIntraSsidPriv | read-only | current | Enable/Disable intra SSID privacy on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.15 | ColumnfapVapMacAuth | read-only | current | Enable/Disable MAC authorization on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.16 | ColumnfapVapMacAuthFailThrough | read-only | current | Enable/Disable MAC authorization fail through on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.17 | ColumnfapVapTunnelType | read-only | current | The tunnel type of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.18 | ColumnfapVapVlanId | read-only | current | Vlan ID of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.19 | ColumnfapVapAuth | read-only | current | Authentication information of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.20 | ColumnfapVapProbRespSuppress | read-only | current | Enable/Disable probe response suppress on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.21 | ColumnfapVapProbRespThresh | read-only | current | Probe response threshold on the VAP in dBm. |
| 1.3.6.1.4.1.12356.120.7.1.1.22 | ColumnfapVapRxSop | read-only | current | Enable/Disable Rx SoP on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.23 | ColumnfapVapRx5GThresh | read-only | current | Rx 5G threshold on the VAP in dBm. |
| 1.3.6.1.4.1.12356.120.7.1.1.24 | ColumnfapVapRx2GThresh | read-only | current | Rx 2G threshold on the VAP in dBm. |
| 1.3.6.1.4.1.12356.120.7.1.1.25 | ColumnfapVapLdpcType | read-only | current | LDPC coding type of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.26 | ColumnfapVapDhcpOp82Insert | read-only | current | Enable/Disable DHCP option 82 insertion on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.27 | ColumnfapVapDhcpOp82CircId | read-only | current | DHCP option 82 circuit ID of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.28 | ColumnfapVapDhcpOp82RemId | read-only | current | DHCP option 82 remote ID of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.29 | ColumnfapVapBcSuppression | read-only | current | Broadcast and multicast suppression of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.30 | ColumnfapVapKeyId | read-only | current | Key Id of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.31 | ColumnfapVapKeyLength | read-only | current | Key length of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.32 | ColumnfapVapPMF | read-only | current | PMF options of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.33 | ColumnfapVapOKC | read-only | current | Disable/enable the OKC of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.34 | ColumnfapVapDynamicVLAN | read-only | current | Enable/Disable dynamic VLAN on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.35 | ColumnfapVapExternRoaming | read-only | current | Enable/disable Extern roaming on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.36 | ColumnfapVapVoiceEnterprise | read-only | current | Enable/Disable voice enterprise on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.37 | ColumnfapVapFastBssTrans | read-only | current | Enable/Disable fast BSS transtion on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.38 | ColumnfapVapCpAuth | read-only | current | Enable/Disable captive portal authorization on the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.39 | ColumnfapVapWebAuthServer | read-only | current | CP authorization web server of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.40 | ColumnfapVapAtfWeight | read-only | current | Air time fairness weightage of the VAP in percentage. |
| 1.3.6.1.4.1.12356.120.7.1.1.41 | ColumnfapVapRadServer | read-only | current | Radius server list. Format(IP address:port number). |
| 1.3.6.1.4.1.12356.120.7.1.1.42 | ColumnfapVapRadAcctServer | read-only | current | Radius account server list. Format(IP address:port number). |
| 1.3.6.1.4.1.12356.120.7.1.1.43 | ColumnfapVapRadAcctInterimIntv | read-only | current | Radius account interim interval. |
| 1.3.6.1.4.1.12356.120.7.1.1.44 | ColumnfapVapRadCoA | read-only | current | Enable/disable Radius CoA. |
| 1.3.6.1.4.1.12356.120.7.1.1.45 | ColumnfapVapStaInfoCount | read-only | current | Station count of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.46 | ColumnfapVapStaInfoMax | read-only | current | Station maximum count of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.47 | ColumnfapVapRateLimitUL | read-only | current | Rate limit(Kbps) up link. |
| 1.3.6.1.4.1.12356.120.7.1.1.48 | ColumnfapVapRateLimitDL | read-only | current | Rate limit(Kbps) down link. |
| 1.3.6.1.4.1.12356.120.7.1.1.49 | ColumnfapVapRateLimitUlUser | read-only | current | Rate limit(Kbps) up link user. |
| 1.3.6.1.4.1.12356.120.7.1.1.50 | ColumnfapVapRateLimitDLUser | read-only | current | Rate limit(Kbps) down link user. |
| 1.3.6.1.4.1.12356.120.7.1.1.51 | ColumnfapVapRateLimitBurst | read-only | current | Enable/disable rate limit burst. |
| 1.3.6.1.4.1.12356.120.7.1.1.52 | ColumnfapVapPrimaryWag | read-only | current | The name of the primary WAG of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.53 | ColumnfapVapSecondaryWag | read-only | current | The name of the secondary WAG of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.54 | ColumnfapVapCurrentWag | read-only | current | The name of the current live WAG of the VAP. |
| 1.3.6.1.4.1.12356.120.7.1.1.55 | ColumnfapVapTunEchoIntv | read-only | current | The time interval (seconds) to send out echo frame when the VAP is in the tunnel dual ping mode. |
| 1.3.6.1.4.1.12356.120.7.1.1.56 | ColumnfapVapTunFallbackTimeout | read-only | current | Timeout value (seconds) to check if the current tunnel falls back to the configured primary tunnel. |
| 1.3.6.1.4.1.12356.120.8 | NodefapStationTables | |||
| 1.3.6.1.4.1.12356.120.8.1 | TablefapStationTable | not-accessible | current | A table of connected stations on the device |
| 1.3.6.1.4.1.12356.120.8.1.1 | RowfapStationEntry | not-accessible | current | An entry containing information applicable \ to connected stations |
| 1.3.6.1.4.1.12356.120.8.1.1.1 | ColumnfapStaRadioId | not-accessible | current | Index number of the radio. |
| 1.3.6.1.4.1.12356.120.8.1.1.2 | ColumnfapStaWlanId | not-accessible | current | Index number of the WLAN. |
| 1.3.6.1.4.1.12356.120.8.1.1.3 | ColumnfapStaMacAddr | not-accessible | current | MAC address of the connected station. |
| 1.3.6.1.4.1.12356.120.8.1.1.4 | ColumnfapStaBSSID | read-only | current | BSSID of the connected station. |
| 1.3.6.1.4.1.12356.120.8.1.1.5 | ColumnfapStaVlanId | read-only | current | Vlan Id of the connected station. |
| 1.3.6.1.4.1.12356.120.8.1.1.6 | ColumnfapStaIpAddr | read-only | current | IP address of the connected station. |
| 1.3.6.1.4.1.12356.120.8.1.1.7 | ColumnfapStaSSID | read-only | current | SSID of the connected station. |
| 1.3.6.1.4.1.12356.120.9 | NodefapWagTables | |||
| 1.3.6.1.4.1.12356.120.9.1 | TablefapWagTable | not-accessible | current | A table of tunnel profiles configured on the device |
| 1.3.6.1.4.1.12356.120.9.1.1 | RowfapWagEntry | not-accessible | current | An tunnel profile entry containing information applicable to a particular virtual domain |
| 1.3.6.1.4.1.12356.120.9.1.1.1 | ColumnfapWagTunType | not-accessible | current | The tunnel type of the WAG. It's one of indexes for the WAG entry. |
| 1.3.6.1.4.1.12356.120.9.1.1.2 | ColumnfapWagIpAddr | not-accessible | current | The IP address of the WAG. It's one of indexes for the WAG entry. |
| 1.3.6.1.4.1.12356.120.9.1.1.3 | ColumnfapWagPort | not-accessible | current | The UDP port of the WAG. It's one of indexes for the WAG entry. |
| 1.3.6.1.4.1.12356.120.9.1.1.4 | ColumnfapWagState | read-only | current | The FSM state of the current WAG. |
| 1.3.6.1.4.1.12356.120.9.1.1.5 | ColumnfapWagRxPackets | read-only | current | The number of packets received on the current tunnel. |
| 1.3.6.1.4.1.12356.120.9.1.1.6 | ColumnfapWagRxBytes | read-only | current | The number of bytes received on the current tunnel. |
| 1.3.6.1.4.1.12356.120.9.1.1.7 | ColumnfapWagRxErrors | read-only | current | The number of received packet errors on the current tunnel. |
| 1.3.6.1.4.1.12356.120.9.1.1.8 | ColumnfapWagTxPackets | read-only | current | The number of packets transmitted on the current tunnel. |
| 1.3.6.1.4.1.12356.120.9.1.1.9 | ColumnfapWagTxBytes | read-only | current | The number of bytes transmitted on the current tunnel. |
| 1.3.6.1.4.1.12356.120.9.1.1.10 | ColumnfapWagTxErrors | read-only | current | The number of transmitted packet errors on the current tunnel. |
| 1.3.6.1.4.1.12356.120.9.1.1.11 | ColumnfapWagAliveTime | read-only | current | How long the tunnel is in active mode in seconds. |
| 1.3.6.1.4.1.12356.120.9.1.1.12 | ColumnfapWagPingInterv | read-only | current | Interval of the ping echo request in seconds. |
| 1.3.6.1.4.1.12356.120.9.1.1.13 | ColumnfapWagPingNum | read-only | current | The number of the ping echo requests. |
| 1.3.6.1.4.1.12356.120.9.1.1.14 | ColumnfapWagDhcpAddr | read-only | current | The IP address used in the DHCP request. |
| 1.3.6.1.4.1.12356.120.10 | NodefapModel | |||
| 1.3.6.1.4.1.12356.120.10.22111 | Nodefap221e | |||
| 1.3.6.1.4.1.12356.120.10.22121 | Nodefapu221ev | |||
| 1.3.6.1.4.1.12356.120.10.22131 | Nodefaps221e | |||
| 1.3.6.1.4.1.12356.120.10.22211 | Nodefap222e | |||
| 1.3.6.1.4.1.12356.120.10.22311 | Nodefap223e | |||
| 1.3.6.1.4.1.12356.120.10.22321 | Nodefapu223ev | |||
| 1.3.6.1.4.1.12356.120.10.22331 | Nodefaps223e | |||
| 1.3.6.1.4.1.12356.120.10.22411 | Nodefap224e | |||
| 1.3.6.1.4.1.12356.120.10.23111 | Nodefap231e | |||
| 1.3.6.1.4.1.12356.120.10.23112 | Nodefap231f | |||
| 1.3.6.1.4.1.12356.120.10.23122 | Nodefapu231f | |||
| 1.3.6.1.4.1.12356.120.10.23412 | Nodefap234f | |||
| 1.3.6.1.4.1.12356.120.10.23422 | Nodefapu234f | |||
| 1.3.6.1.4.1.12356.120.10.23912 | Nodefap23jf | |||
| 1.3.6.1.4.1.12356.120.10.24921 | Nodefapu24jev | |||
| 1.3.6.1.4.1.12356.120.10.24941 | Nodefapc24je | |||
| 1.3.6.1.4.1.12356.120.10.32111 | Nodefap321e | |||
| 1.3.6.1.4.1.12356.120.10.32121 | Nodefapu321ev | |||
| 1.3.6.1.4.1.12356.120.10.32321 | Nodefapu323ev | |||
| 1.3.6.1.4.1.12356.120.10.42111 | Nodefap421e | |||
| 1.3.6.1.4.1.12356.120.10.42121 | Nodefapu421ev | |||
| 1.3.6.1.4.1.12356.120.10.42131 | Nodefaps421e | |||
| 1.3.6.1.4.1.12356.120.10.42221 | Nodefapu422ev | |||
| 1.3.6.1.4.1.12356.120.10.42231 | Nodefaps422e | |||
| 1.3.6.1.4.1.12356.120.10.42311 | Nodefap423e | |||
| 1.3.6.1.4.1.12356.120.10.42321 | Nodefapu423ev | |||
| 1.3.6.1.4.1.12356.120.10.42331 | Nodefaps423e | |||
| 1.3.6.1.4.1.12356.120.10.43112 | Nodefap431f | |||
| 1.3.6.1.4.1.12356.120.10.43122 | Nodefapu431f | |||
| 1.3.6.1.4.1.12356.120.10.43212 | Nodefap432f | |||
| 1.3.6.1.4.1.12356.120.10.43222 | Nodefapu432f | |||
| 1.3.6.1.4.1.12356.120.10.43312 | Nodefap433f | |||
| 1.3.6.1.4.1.12356.120.10.43322 | Nodefapu433f | |||
| 1.3.6.1.4.1.12356.120.10.83112 | Nodefap831f | |||
| 1.3.6.1.4.1.12356.120.100 | NodefapMibConformance | |||
| 1.3.6.1.4.1.12356.120.100.1 | GroupfapTrapGroup | current | Event notifications. | |
| 1.3.6.1.4.1.12356.120.100.2 | GroupfapTrapObjectGroup | current | Object identifiers used in notifications. | |
| 1.3.6.1.4.1.12356.120.100.3 | GroupfapSysCommGroup | current | Objects pertaining to the common system info of the AP. | |
| 1.3.6.1.4.1.12356.120.100.4 | GroupfapWtpConfGroup | current | Objects pertaining to the configuration of the AP. | |
| 1.3.6.1.4.1.12356.120.100.5 | GroupfapWtpStatusGroup | current | Object pertaining to the status of the AP. | |
| 1.3.6.1.4.1.12356.120.100.6 | GroupfapRadioGroup | current | Object pertaining to radio information of the AP. | |
| 1.3.6.1.4.1.12356.120.100.7 | GroupfapVapGroup | current | Object pertaining to the VAP information of the AP. | |
| 1.3.6.1.4.1.12356.120.100.8 | GroupfapWagGroup | current | Object pertaining to the WAG information of the AP. | |
| 1.3.6.1.4.1.12356.120.100.9 | GroupfapStationGroup | current | Object pertaining to the station information of the AP. | |
| 1.3.6.1.4.1.12356.120.100.100 | CompliancefapMibCompliance | current | The compliance statement for the FAP MIB. |