FOUNDRY-SN-ROOT-MIB
5611 objects
This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers.
Imported Objects
| SNMPv2-SMI | enterprises MODULE-IDENTITY |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.68 | IdentityvrrpMIB | This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers. | ||
| 1.3.6.1.2.1.68.0 | NodevrrpNotifications | |||
| 1.3.6.1.2.1.68.0.1 | NotificationvrrpTrapNewMaster | current | The newMaster trap indicates that the sending agent has transitioned to 'Master' state. | |
| 1.3.6.1.2.1.68.0.2 | NotificationvrrpTrapAuthFailure | current | A vrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's aut… | |
| 1.3.6.1.2.1.68.1 | NodevrrpOperations | |||
| 1.3.6.1.2.1.68.1.1 | ScalarvrrpNodeVersion | read-only | current | This value identifies the particular version of the VRRP supported by this node. |
| 1.3.6.1.2.1.68.1.2 | ScalarvrrpNotificationCntl | read-write | current | Indicates whether the VRRP-enabled router will generate SNMP traps for events defined in this MIB. 'Enabled' results in SNMP traps; 'disabled', no traps are se… |
| 1.3.6.1.2.1.68.1.3 | TablevrrpOperTable | not-accessible | current | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpOperEntry' items. |
| 1.3.6.1.2.1.68.1.3.1 | RowvrrpOperEntry | not-accessible | current | An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combi… |
| 1.3.6.1.2.1.68.1.3.1.1 | ColumnvrrpOperVrId | not-accessible | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.2.1.68.1.3.1.2 | ColumnvrrpOperVirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined so that it is easily obtainabl… |
| 1.3.6.1.2.1.68.1.3.1.3 | ColumnvrrpOperState | read-only | current | The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a sta… |
| 1.3.6.1.2.1.68.1.3.1.4 | ColumnvrrpOperAdminState | read-create | current | This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `b… |
| 1.3.6.1.2.1.68.1.3.1.5 | ColumnvrrpOperPriority | read-create | current | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although … |
| 1.3.6.1.2.1.68.1.3.1.6 | ColumnvrrpOperIpAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond … |
| 1.3.6.1.2.1.68.1.3.1.7 | ColumnvrrpOperMasterIpAddr | read-only | current | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router. |
| 1.3.6.1.2.1.68.1.3.1.8 | ColumnvrrpOperPrimaryIpAddr | read-create | current | In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `vrrpOperMasterIp… |
| 1.3.6.1.2.1.68.1.3.1.9 | ColumnvrrpOperAuthType | read-create | current | Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to th… |
| 1.3.6.1.2.1.68.1.3.1.10 | ColumnvrrpOperAuthKey | read-create | current | The Authentication Key. This object is set according to the value of the 'vrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the l… |
| 1.3.6.1.2.1.68.1.3.1.11 | ColumnvrrpOperAdvertisementInterval | read-create | current | The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
| 1.3.6.1.2.1.68.1.3.1.12 | ColumnvrrpOperPreemptMode | read-create | current | Controls whether a higher priority virtual router will preempt a lower priority master. |
| 1.3.6.1.2.1.68.1.3.1.13 | ColumnvrrpOperVirtualRouterUpTime | read-only | current | This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperState') transitioned out of `initialized'. |
| 1.3.6.1.2.1.68.1.3.1.14 | ColumnvrrpOperProtocol | read-create | current | The particular protocol being controlled by this Virtual Router. New enumerations to this list can only be added via a new RFC on the standards track. |
| 1.3.6.1.2.1.68.1.3.1.15 | ColumnvrrpOperRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOpe… |
| 1.3.6.1.2.1.68.1.4 | TablevrrpAssoIpAddrTable | not-accessible | current | The table of addresses associated with this virtual router. |
| 1.3.6.1.2.1.68.1.4.1 | RowvrrpAssoIpAddrEntry | not-accessible | current | An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of… |
| 1.3.6.1.2.1.68.1.4.1.1 | ColumnvrrpAssoIpAddr | not-accessible | current | The assigned IP addresses that a virtual router is responsible for backing up. |
| 1.3.6.1.2.1.68.1.4.1.2 | ColumnvrrpAssoIpAddrRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results… |
| 1.3.6.1.2.1.68.1.5 | ScalarvrrpTrapPacketSrc | accessible-for-notify | current | The IP address of an inbound VRRP packet. Used by vrrpTrapAuthFailure trap. |
| 1.3.6.1.2.1.68.1.6 | ScalarvrrpTrapAuthErrorType | accessible-for-notify | current | Potential types of configuration conflicts. Used by vrrpAuthFailure trap. |
| 1.3.6.1.2.1.68.2 | NodevrrpStatistics | |||
| 1.3.6.1.2.1.68.2.1 | ScalarvrrpRouterChecksumErrors | read-only | current | The total number of VRRP packets received with an invalid VRRP checksum value. |
| 1.3.6.1.2.1.68.2.2 | ScalarvrrpRouterVersionErrors | read-only | current | The total number of VRRP packets received with an unknown or unsupported version number. |
| 1.3.6.1.2.1.68.2.3 | ScalarvrrpRouterVrIdErrors | read-only | current | The total number of VRRP packets received with an invalid VRID for this virtual router. |
| 1.3.6.1.2.1.68.2.4 | TablevrrpRouterStatsTable | not-accessible | current | Table of virtual router statistics. |
| 1.3.6.1.2.1.68.2.4.1 | RowvrrpRouterStatsEntry | not-accessible | current | An entry in the table, containing statistics information about a given virtual router. |
| 1.3.6.1.2.1.68.2.4.1.1 | ColumnvrrpStatsBecomeMaster | read-only | current | The total number of times that this virtual router's state has transitioned to MASTER. |
| 1.3.6.1.2.1.68.2.4.1.2 | ColumnvrrpStatsAdvertiseRcvd | read-only | current | The total number of VRRP advertisements received by this virtual router. |
| 1.3.6.1.2.1.68.2.4.1.3 | ColumnvrrpStatsAdvertiseIntervalErrors | read-only | current | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. |
| 1.3.6.1.2.1.68.2.4.1.4 | ColumnvrrpStatsAuthFailures | read-only | current | The total number of VRRP packets received that do not pass the authentication check. |
| 1.3.6.1.2.1.68.2.4.1.5 | ColumnvrrpStatsIpTtlErrors | read-only | current | The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. |
| 1.3.6.1.2.1.68.2.4.1.6 | ColumnvrrpStatsPriorityZeroPktsRcvd | read-only | current | The total number of VRRP packets received by the virtual router with a priority of '0'. |
| 1.3.6.1.2.1.68.2.4.1.7 | ColumnvrrpStatsPriorityZeroPktsSent | read-only | current | The total number of VRRP packets sent by the virtual router with a priority of '0'. |
| 1.3.6.1.2.1.68.2.4.1.8 | ColumnvrrpStatsInvalidTypePktsRcvd | read-only | current | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. |
| 1.3.6.1.2.1.68.2.4.1.9 | ColumnvrrpStatsAddressListErrors | read-only | current | The total number of packets received for which the address list does not match the locally configured list for the virtual router. |
| 1.3.6.1.2.1.68.2.4.1.10 | ColumnvrrpStatsInvalidAuthType | read-only | current | The total number of packets received with an unknown authentication type. |
| 1.3.6.1.2.1.68.2.4.1.11 | ColumnvrrpStatsAuthTypeMismatch | read-only | current | The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`vrrpOperAuthType'). |
| 1.3.6.1.2.1.68.2.4.1.12 | ColumnvrrpStatsPacketLengthErrors | read-only | current | The total number of packets received with a packet length less than the length of the VRRP header. |
| 1.3.6.1.2.1.68.3 | NodevrrpConformance | |||
| 1.3.6.1.2.1.68.3.1 | NodevrrpMIBCompliances | |||
| 1.3.6.1.2.1.68.3.1.1 | CompliancevrrpMIBCompliance | current | The core compliance statement for all VRRP implementations. | |
| 1.3.6.1.2.1.68.3.2 | NodevrrpMIBGroups | |||
| 1.3.6.1.2.1.68.3.2.1 | GroupvrrpOperGroup | current | Conformance group for VRRP operations. | |
| 1.3.6.1.2.1.68.3.2.2 | GroupvrrpStatsGroup | current | Conformance group for VRRP statistics. | |
| 1.3.6.1.2.1.68.3.2.3 | GroupvrrpTrapGroup | current | Conformance group for objects contained in VRRP notifications. | |
| 1.3.6.1.2.1.68.3.2.4 | GroupvrrpNotificationGroup | current | The VRRP MIB Notification Group. | |
| 1.3.6.1.2.1.100 | Identitybgp4V2TC | Textual conventions for BGP-4. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC XXX; see the RFC itself for full legal notic… | ||
| 1.3.6.1.3.1 | Nodepwe3 | |||
| 1.3.6.1.3.2 | Nodel3vpn | |||
| 1.3.6.1.3.3 | Nodebfd | |||
| 1.3.6.1.3.4 | NodevplsRoot | |||
| 1.3.6.1.3.5 | Nodebgp4V2Root | |||
| 1.3.6.1.3.5.1 | Identitybgp4V2 | The MIB module for the BGP-4 protocol. Copyright (C) The IETF Trust (2011). This version of this MIB module is part of RFC XXX; see the RFC itself for full leg… | ||
| 1.3.6.1.3.5.1.0 | Nodebgp4V2Notifications | |||
| 1.3.6.1.3.5.1.0.1 | Notificationbgp4V2EstablishedNotification | current | The BGP Established event is generated when the BGP FSM enters the established state. | |
| 1.3.6.1.3.5.1.0.2 | Notificationbgp4V2BackwardTransitionNotification | current | The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. Due to the nature of the BGP state … | |
| 1.3.6.1.3.5.1.1 | Nodebgp4V2Objects | |||
| 1.3.6.1.3.5.1.1.2 | Tablebgp4V2PeerTable | not-accessible | current | BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. |
| 1.3.6.1.3.5.1.1.2.1 | Rowbgp4V2PeerEntry | not-accessible | current | Entry containing information about the connection with a remote BGP peer. |
| 1.3.6.1.3.5.1.1.2.1.1 | Columnbgp4V2PeerInstance | not-accessible | current | The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes routers running BG… |
| 1.3.6.1.3.5.1.1.2.1.2 | Columnbgp4V2PeerLocalAddrType | not-accessible | current | The address family of the local end of the peering session. |
| 1.3.6.1.3.5.1.1.2.1.3 | Columnbgp4V2PeerLocalAddr | not-accessible | current | The local IP address of this entry's BGP connection. |
| 1.3.6.1.3.5.1.1.2.1.4 | Columnbgp4V2PeerRemoteAddrType | not-accessible | current | The address family of the remote end of the peering session. |
| 1.3.6.1.3.5.1.1.2.1.5 | Columnbgp4V2PeerRemoteAddr | not-accessible | current | The remote IP address of this entry's BGP peer. |
| 1.3.6.1.3.5.1.1.2.1.6 | Columnbgp4V2PeerLocalPort | read-only | current | The local port for the TCP connection between the BGP peers. |
| 1.3.6.1.3.5.1.1.2.1.7 | Columnbgp4V2PeerLocalAs | read-only | current | Some implementations of BGP can represent themselves as multiple ASes. This is the AS that this peering session is representing itself as to the remote peer. |
| 1.3.6.1.3.5.1.1.2.1.8 | Columnbgp4V2PeerLocalIdentifier | read-only | current | The BGP Identifier of the local system for this peering session. It is REQUIRED that all bgp4V2PeerLocalIdentifier values for the same bgp4V2PeerInstance be id… |
| 1.3.6.1.3.5.1.1.2.1.9 | Columnbgp4V2PeerRemotePort | read-only | current | The remote port for the TCP connection between the BGP peers. Note that the objects bgp4V2PeerLocalAddr, bgp4V2PeerLocalPort, bgp4V2PeerRemoteAddr and bgp4V2Pe… |
| 1.3.6.1.3.5.1.1.2.1.10 | Columnbgp4V2PeerRemoteAs | read-only | current | The remote autonomous system number received in the BGP OPEN message. |
| 1.3.6.1.3.5.1.1.2.1.11 | Columnbgp4V2PeerRemoteIdentifier | read-only | current | The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the bgp4V2PeerState is in the openconfirm or the established state. |
| 1.3.6.1.3.5.1.1.2.1.12 | Columnbgp4V2PeerAdminStatus | read-only | current | Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in… |
| 1.3.6.1.3.5.1.1.2.1.13 | Columnbgp4V2PeerState | read-only | current | The BGP peer connection state. |
| 1.3.6.1.3.5.1.1.2.1.14 | Columnbgp4V2PeerDescription | read-only | current | A user configured description identifying this peer. When this object is not the empty string, this object SHOULD contain a description that is unique within a… |
| 1.3.6.1.3.5.1.1.3 | Tablebgp4V2PeerErrorsTable | not-accessible | current | On a per-peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. |
| 1.3.6.1.3.5.1.1.3.1 | Rowbgp4V2PeerErrorsEntry | not-accessible | current | Each entry contains information about errors sent and received for a particular BGP peer. |
| 1.3.6.1.3.5.1.1.3.1.1 | Columnbgp4V2PeerLastErrorCodeReceived | read-only | current | The last error code received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.3.5.1.1.3.1.2 | Columnbgp4V2PeerLastErrorSubCodeReceived | read-only | current | The last subcode received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.3.5.1.1.3.1.3 | Columnbgp4V2PeerLastErrorReceivedTime | read-only | current | The timestamp that the last NOTIFICATION was received from this peer. |
| 1.3.6.1.3.5.1.1.3.1.4 | Columnbgp4V2PeerLastErrorReceivedText | read-only | current | This object contains an implementation specific explanation of the error that was reported. |
| 1.3.6.1.3.5.1.1.3.1.5 | Columnbgp4V2PeerLastErrorReceivedData | read-only | current | The last error code's data seen by this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this da… |
| 1.3.6.1.3.5.1.1.3.1.6 | Columnbgp4V2PeerLastErrorCodeSent | read-only | current | The last error code sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.3.5.1.1.3.1.7 | Columnbgp4V2PeerLastErrorSubCodeSent | read-only | current | The last subcode sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.3.5.1.1.3.1.8 | Columnbgp4V2PeerLastErrorSentTime | read-only | current | The timestamp that the last NOTIFICATION was sent to this peer. |
| 1.3.6.1.3.5.1.1.3.1.9 | Columnbgp4V2PeerLastErrorSentText | read-only | current | This object contains an implementation specific explanation of the error that is being reported. |
| 1.3.6.1.3.5.1.1.3.1.10 | Columnbgp4V2PeerLastErrorSentData | read-only | current | The last error code's data sent to this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this da… |
| 1.3.6.1.3.5.1.1.4 | Tablebgp4V2PeerEventTimesTable | not-accessible | current | A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the established state. |
| 1.3.6.1.3.5.1.1.4.1 | Rowbgp4V2PeerEventTimesEntry | not-accessible | current | Each row contains a set of statistics about time spent and events encountered in the peer session established state. |
| 1.3.6.1.3.5.1.1.4.1.1 | Columnbgp4V2PeerFsmEstablishedTime | read-only | current | This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set… |
| 1.3.6.1.3.5.1.1.4.1.2 | Columnbgp4V2PeerInUpdatesElapsedTime | read-only | current | Elapsed time (in seconds) since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is … |
| 1.3.6.1.3.5.1.1.9 | Tablebgp4V2NlriTable | not-accessible | current | The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents th… |
| 1.3.6.1.3.5.1.1.9.1 | Rowbgp4V2NlriEntry | not-accessible | current | Information about a path to a network. |
| 1.3.6.1.3.5.1.1.9.1.1 | Columnbgp4V2NlriIndex | not-accessible | current | This index allows for multiple instances of a base prefix for a certain AFI-SAFI from a given peer. This is currently useful for two things: 1. Allowing for a … |
| 1.3.6.1.3.5.1.1.9.1.2 | Columnbgp4V2NlriAfi | not-accessible | current | The address family of the prefix for this NLRI. Note that the AFI is not necessarily equivalent to the an InetAddressType. |
| 1.3.6.1.3.5.1.1.9.1.3 | Columnbgp4V2NlriSafi | not-accessible | current | The subsequent address family of the prefix for this NLRI |
| 1.3.6.1.3.5.1.1.9.1.4 | Columnbgp4V2NlriPrefixType | not-accessible | current | The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the … |
| 1.3.6.1.3.5.1.1.9.1.5 | Columnbgp4V2NlriPrefix | not-accessible | current | An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgp4V2Nlr… |
| 1.3.6.1.3.5.1.1.9.1.6 | Columnbgp4V2NlriPrefixLen | not-accessible | current | Length in bits of the address prefix in the Network Layer Reachability Information field. |
| 1.3.6.1.3.5.1.1.9.1.7 | Columnbgp4V2NlriBest | read-only | current | An indication of whether or not this route was chosen as the best BGP4 route for this destination. |
| 1.3.6.1.3.5.1.1.9.1.8 | Columnbgp4V2NlriCalcLocalPref | read-only | current | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. In the case where this prefix is ineligible, the value of this objec… |
| 1.3.6.1.3.5.1.1.9.1.9 | Columnbgp4V2NlriOrigin | read-only | current | The ultimate origin of the path information. |
| 1.3.6.1.3.5.1.1.9.1.10 | Columnbgp4V2NlriNextHopAddrType | read-only | current | The address family of the address for the border router that should be used to access the destination network. |
| 1.3.6.1.3.5.1.1.9.1.11 | Columnbgp4V2NlriNextHopAddr | read-only | current | The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet assoc… |
| 1.3.6.1.3.5.1.1.9.1.12 | Columnbgp4V2NlriLinkLocalNextHopAddrType | read-only | current | The address type for IPv6 link local addresses. This is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP im… |
| 1.3.6.1.3.5.1.1.9.1.13 | Columnbgp4V2NlriLinkLocalNextHopAddr | read-only | current | This value contains an IPv6 link local address and is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP impl… |
| 1.3.6.1.3.5.1.1.9.1.14 | Columnbgp4V2NlriLocalPrefPresent | read-only | current | This value is true when the LOCAL_PREF value was sent in the UPDATE message. |
| 1.3.6.1.3.5.1.1.9.1.15 | Columnbgp4V2NlriLocalPref | read-only | current | The originating BGP4 speakers degree of preference for an advertised route. |
| 1.3.6.1.3.5.1.1.9.1.16 | Columnbgp4V2NlriMedPresent | read-only | current | This value is true when the MED value was sent in the UPDATE message. |
| 1.3.6.1.3.5.1.1.9.1.17 | Columnbgp4V2NlriMed | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. When the MED value is absent but has a calculated default va… |
| 1.3.6.1.3.5.1.1.9.1.18 | Columnbgp4V2NlriAtomicAggregate | read-only | current | This value is true when the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific. |
| 1.3.6.1.3.5.1.1.9.1.19 | Columnbgp4V2NlriAggregatorPresent | read-only | current | This value is true when the AGGREGATOR path attribute was sent in the UPDATE message. |
| 1.3.6.1.3.5.1.1.9.1.20 | Columnbgp4V2NlriAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. When bgp4V2NlriAggregatorPresent is false, the value of this object should be zero (0). |
| 1.3.6.1.3.5.1.1.9.1.21 | Columnbgp4V2NlriAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. When bgp4V2NlriAggregatorPresent is false, the value of this object should be 0.0.0.0 |
| 1.3.6.1.3.5.1.1.9.1.22 | Columnbgp4V2NlriAsPathCalcLength | read-only | current | This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection. |
| 1.3.6.1.3.5.1.1.9.1.23 | Columnbgp4V2NlriAsPathString | read-only | current | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is impleme… |
| 1.3.6.1.3.5.1.1.9.1.24 | Columnbgp4V2NlriAsPath | read-only | current | In order to provide a canonicalized form of the BGP-4 AS_PATH along with the human-readable bgp4V2NlriAsPathString, which may be truncated, this object contain… |
| 1.3.6.1.3.5.1.1.9.1.25 | Columnbgp4V2NlriPathAttrUnknown | read-only | current | Path Attributes not understood by this implementation SHOULD be be presented in this object. Those Path Attributes use the type, length, value encoding documen… |
| 1.3.6.1.4.1.1991 | Identityfoundry | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.0 | IdentitysnTraps | The MIB module describes proprietery SNMP Trap information of Ruckus Wireless, Inc' router/switch product. Copyright 1996-2017 Ruckus Wireless, Inc.. All right… | ||
| 1.3.6.1.4.1.1991.0.1 | NotificationsnTrapChasPwrSupply | current | The SNMP trap that is generated when a power supply fails to operate normally. The value is a packed bit string; the 2 power supplies status are encoded into 4… | |
| 1.3.6.1.4.1.1991.0.2 | NotificationsnTrapLockedAddressViolation | current | The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port. | |
| 1.3.6.1.4.1.1991.0.3 | NotificationsnTrapOspfIfStateChange | current | An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface… | |
| 1.3.6.1.4.1.1991.0.4 | NotificationsnTrapOspfVirtIfStateChange | current | An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- fac… | |
| 1.3.6.1.4.1.1991.0.5 | NotificationsnOspfNbrStateChange | current | An ospfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor… | |
| 1.3.6.1.4.1.1991.0.6 | NotificationsnOspfVirtNbrStateChange | current | An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor st… | |
| 1.3.6.1.4.1.1991.0.7 | NotificationsnOspfIfConfigError | current | An ospfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with thi… | |
| 1.3.6.1.4.1.1991.0.8 | NotificationsnOspfVirtIfConfigError | current | An ospfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this rout… | |
| 1.3.6.1.4.1.1991.0.9 | NotificationsnOspfIfAuthFailure | current | An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type … | |
| 1.3.6.1.4.1.1991.0.10 | NotificationsnOspfVirtIfAuthFailure | current | An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type … | |
| 1.3.6.1.4.1.1991.0.11 | NotificationsnOspfIfRxBadPacket | current | An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed. | |
| 1.3.6.1.4.1.1991.0.12 | NotificationsnOspfVirtIfRxBadPacket | current | An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed. | |
| 1.3.6.1.4.1.1991.0.13 | NotificationsnOspfTxRetransmit | current | An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associat… | |
| 1.3.6.1.4.1.1991.0.14 | NotificationospfVirtIfTxRetransmit | current | An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated wi… | |
| 1.3.6.1.4.1.1991.0.15 | NotificationsnOspfOriginateLsa | current | An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happe… | |
| 1.3.6.1.4.1.1991.0.16 | NotificationsnOspfMaxAgeLsa | current | An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge. | |
| 1.3.6.1.4.1.1991.0.17 | NotificationsnOspfLsdbOverflow | current | An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded ospfExtLsdbLimit. | |
| 1.3.6.1.4.1.1991.0.18 | NotificationsnOspfLsdbApproachingOverflow | current | An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit. | |
| 1.3.6.1.4.1.1991.0.19 | NotificationsnTrapL4MaxSessionLimitReached | current | The SNMP trap that is generated when the maximum number of connections reached. | |
| 1.3.6.1.4.1.1991.0.20 | NotificationsnTrapL4TcpSynLimitReached | current | The SNMP trap that is generated when the number of TCP SYN limits reached. | |
| 1.3.6.1.4.1.1991.0.21 | NotificationsnTrapL4RealServerUp | current | The SNMP trap that is generated when the load balancing real server is up. | |
| 1.3.6.1.4.1.1991.0.22 | NotificationsnTrapL4RealServerDown | current | The SNMP trap that is generated when the load balancing real server is down. | |
| 1.3.6.1.4.1.1991.0.23 | NotificationsnTrapL4RealServerPortUp | current | The SNMP trap that is generated when the load balancing real server TCP port is up. | |
| 1.3.6.1.4.1.1991.0.24 | NotificationsnTrapL4RealServerPortDown | current | The SNMP trap that is generated when the load balancing real server TCP port is down. | |
| 1.3.6.1.4.1.1991.0.25 | NotificationsnTrapL4RealServerMaxConnectionLimitReached | current | The SNMP trap that is generated when the real server reaches maximum number of connections. | |
| 1.3.6.1.4.1.1991.0.26 | NotificationsnTrapL4BecomeStandby | current | The SNMP trap that is generated when the server load balancing switch changes state from active to standby. | |
| 1.3.6.1.4.1.1991.0.27 | NotificationsnTrapL4BecomeActive | current | The SNMP trap that is generated when the server load balancing switch changes state from standby to active. | |
| 1.3.6.1.4.1.1991.0.28 | NotificationsnTrapModuleInserted | current | The SNMP trap that is generated when a module was inserted to the chassis during system running. | |
| 1.3.6.1.4.1.1991.0.29 | NotificationsnTrapModuleRemoved | current | The SNMP trap that is generated when a module was removed from the chassis during system running. | |
| 1.3.6.1.4.1.1991.0.30 | NotificationsnTrapChasPwrSupplyFailed | current | The SNMP trap that is generated when a power supply operational status changed from normal to failure. | |
| 1.3.6.1.4.1.1991.0.31 | NotificationsnTrapChasFanFailed | current | The SNMP trap that is generated when a fan fails to operate normally. | |
| 1.3.6.1.4.1.1991.0.32 | NotificationsnTrapLockedAddressViolation2 | current | The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port. | |
| 1.3.6.1.4.1.1991.0.33 | NotificationsnTrapFsrpIfStateChange | current | The SNMP trap that is generated when a FSRP routing device changed state from active to standby or vice-versa. | |
| 1.3.6.1.4.1.1991.0.34 | NotificationsnTrapVrrpIfStateChange | current | The SNMP trap that is generated when a VRRP routing device switched between states master, backup, intialized or uknown. | |
| 1.3.6.1.4.1.1991.0.35 | NotificationsnTrapMgmtModuleRedunStateChange | current | The SNMP trap that is generated when the management module changes redundancy state. | |
| 1.3.6.1.4.1.1991.0.36 | NotificationsnTrapTemperatureWarning | current | The SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold. | |
| 1.3.6.1.4.1.1991.0.37 | NotificationsnTrapAccessListDeny | current | The SNMP trap that is generated when a packet was denied by an access list. | |
| 1.3.6.1.4.1.1991.0.38 | NotificationsnTrapMacFilterDeny | current | The SNMP trap that is generated when a packet was denied by a MAC address filter. | |
| 1.3.6.1.4.1.1991.0.39 | NotificationsnTrapL4GslbRemoteUp | current | The SNMP trap that is generated when the connection to the remote SI is established. | |
| 1.3.6.1.4.1.1991.0.40 | NotificationsnTrapL4GslbRemoteDown | current | The SNMP trap that is generated when the connection to the remote SI is down. | |
| 1.3.6.1.4.1.1991.0.41 | NotificationsnTrapL4GslbRemoteControllerUp | current | The SNMP trap that is generated when the connection to the GSLB SI is established. | |
| 1.3.6.1.4.1.1991.0.42 | NotificationsnTrapL4GslbRemoteControllerDown | current | The SNMP trap that is generated when the connection to the GSLB SI is down. | |
| 1.3.6.1.4.1.1991.0.43 | NotificationsnTrapL4GslbHealthCheckIpUp | current | The SNMP trap that is generated when GSLB health check for an address transitions from down to active state. | |
| 1.3.6.1.4.1.1991.0.44 | NotificationsnTrapL4GslbHealthCheckIpDown | current | The SNMP trap that is generated when GSLB health check for an address transitions from active to down state. | |
| 1.3.6.1.4.1.1991.0.45 | NotificationsnTrapL4GslbHealthCheckIpPortUp | current | The SNMP trap that is generated when a given port for a health check address is up. | |
| 1.3.6.1.4.1.1991.0.46 | NotificationsnTrapL4GslbHealthCheckIpPortDown | current | The SNMP trap that is generated when a given port for a health check address is down. | |
| 1.3.6.1.4.1.1991.0.47 | NotificationsnTrapL4FirewallBecomeStandby | current | The SNMP trap that is generated when the server load balancing switch Firewall changes state from active to standby. | |
| 1.3.6.1.4.1.1991.0.48 | NotificationsnTrapL4FirewallBecomeActive | current | The SNMP trap that is generated when the server load balancing switch Firewall changes state from standby to active. | |
| 1.3.6.1.4.1.1991.0.49 | NotificationsnTrapL4FirewallPathUp | current | The SNMP trap that is generated when the server load balancing switch Firewall path is up. | |
| 1.3.6.1.4.1.1991.0.50 | NotificationsnTrapL4FirewallPathDown | current | The SNMP trap that is generated when the server load balancing switch Firewall path is down. | |
| 1.3.6.1.4.1.1991.0.51 | NotificationsnTrapIcmpLocalExceedBurst | current | The SNMP trap that is generated when incoming ICMP exceeds burst-MAX. | |
| 1.3.6.1.4.1.1991.0.52 | NotificationsnTrapIcmpTransitExceedBurst | current | The SNMP trap that is generated when transit ICMP exceeds burst-MAX. | |
| 1.3.6.1.4.1.1991.0.53 | NotificationsnTrapTcpLocalExceedBurst | current | The SNMP trap that is generated when incoming TCP SYN exceeds burst-MAX. | |
| 1.3.6.1.4.1.1991.0.54 | NotificationsnTrapTcpTransitExceedBurst | current | The SNMP trap that is generated when transit TCP exceeds burst-MAX. | |
| 1.3.6.1.4.1.1991.0.55 | NotificationsnTrapL4ContentVerification | current | The SNMP trap that is generated when the HTTP match-list pattern is found. | |
| 1.3.6.1.4.1.1991.0.56 | NotificationsnTrapDuplicateIp | current | Duplicate IP address detected. | |
| 1.3.6.1.4.1.1991.0.57 | NotificationsnTrapMplsProblem | obsolete | NOT IMPLEMENTED: MPLS Problem Detected. | |
| 1.3.6.1.4.1.1991.0.58 | NotificationsnTrapMplsException | obsolete | NOT IMPLEMENTED: MPLS Exception Detected. | |
| 1.3.6.1.4.1.1991.0.59 | NotificationsnTrapMplsAudit | obsolete | NOT IMPLEMENTED: MPLS Audit Trap. | |
| 1.3.6.1.4.1.1991.0.60 | NotificationsnTrapMplsDeveloper | obsolete | NOT IMPLEMENTED: MPLS Developer Trap. | |
| 1.3.6.1.4.1.1991.0.61 | NotificationsnTrapNoBmFreeQueue | current | The SNMP trap that is generated when no free queue is available in buffer manager. | |
| 1.3.6.1.4.1.1991.0.62 | NotificationsnTrapSmcDmaDrop | current | The SNMP trap that is generated when SMC DMA packet is dropped. | |
| 1.3.6.1.4.1.1991.0.63 | NotificationsnTrapSmcBpDrop | current | The SNMP trap that is generated when SMC BackPlane packet is dropped. | |
| 1.3.6.1.4.1.1991.0.64 | NotificationsnTrapBmWriteSeqDrop | current | The SNMP trap that is generated when BM write sequence packet is dropped. | |
| 1.3.6.1.4.1.1991.0.65 | NotificationsnTrapBgpPeerUp | current | The SNMP trap that is generated when the bgp peer is up. | |
| 1.3.6.1.4.1.1991.0.66 | NotificationsnTrapBgpPeerDown | current | The SNMP trap that is generated when the bgp peer is down. | |
| 1.3.6.1.4.1.1991.0.67 | NotificationsnTrapL4RealServerResponseTimeLowerLimit | current | The SNMP trap that is generated when the real server average response time exceeds lower threshold. | |
| 1.3.6.1.4.1.1991.0.68 | NotificationsnTrapL4RealServerResponseTimeUpperLimit | current | The SNMP trap that is generated when the real server average response time exceeds upper threshold. | |
| 1.3.6.1.4.1.1991.0.69 | NotificationsnTrapL4TcpAttackRateExceedMax | current | The SNMP trap that is generated when the TCP attack rate exceeds configured maximum. | |
| 1.3.6.1.4.1.1991.0.70 | NotificationsnTrapL4TcpAttackRateExceedThreshold | current | The SNMP trap that is generated when the TCP attack rate exceeds 80% of configured maximum. | |
| 1.3.6.1.4.1.1991.0.71 | NotificationsnTrapL4ConnectionRateExceedMax | current | The SNMP trap that is generated when the L4 connection rate exceeds configured maximum. | |
| 1.3.6.1.4.1.1991.0.72 | NotificationsnTrapL4ConnectionRateExceedThreshold | current | The SNMP trap that is generated when the L4 connection rate exceeds 80% of configured maximum | |
| 1.3.6.1.4.1.1991.0.73 | NotificationsnTrapRunningConfigChanged | current | The SNMP trap that is generated when the running configuration was changed. | |
| 1.3.6.1.4.1.1991.0.74 | NotificationsnTrapStartupConfigChanged | current | The SNMP trap that is generated when the startup configuration was changed. | |
| 1.3.6.1.4.1.1991.0.75 | NotificationsnTrapUserLogin | current | The SNMP trap that is generated when user login. | |
| 1.3.6.1.4.1.1991.0.76 | NotificationsnTrapUserLogout | current | The SNMP trap that is generated when user logout. | |
| 1.3.6.1.4.1.1991.0.77 | NotificationsnTrapPortSecurityViolation | current | The SNMP trap that is generated when insecure MAC addresses are received from a port with MAC security feature enabled. | |
| 1.3.6.1.4.1.1991.0.78 | NotificationsnTrapPortSecurityShutdown | current | The SNMP trap that is generated when insecure MAC addresses are received from a port caused the port to shutdown. | |
| 1.3.6.1.4.1.1991.0.79 | NotificationsnTrapMrpStateChange | current | The SNMP trap that is generated when a MRP switching and routing device changed state to disabled, blocking, preforwarding, forwarding, uknown. | |
| 1.3.6.1.4.1.1991.0.80 | NotificationsnTrapMrpCamError | current | The SNMP trap that is generated when a MRP Cam Error occurs. | |
| 1.3.6.1.4.1.1991.0.81 | NotificationsnTrapChasPwrSupplyOK | current | The SNMP trap that is generated when a power supply operational status changed from failure to normal. | |
| 1.3.6.1.4.1.1991.0.82 | NotificationsnTrapVrrpeIfStateChange | current | The SNMP trap that is generated when a VRRPE routing device switched between states master, backup, intialized or uknown. | |
| 1.3.6.1.4.1.1991.0.83 | NotificationsnTrapVsrpIfStateChange | current | The SNMP trap that is generated when a VSRP switching and routing device switched between states master, backup, intialized or uknown. | |
| 1.3.6.1.4.1.1991.0.84 | NotificationsnTrapSrcIpAddressViolation | current | The SNMP trap that is generated when a rogue device spoofs source IP address for denial of service attack. | |
| 1.3.6.1.4.1.1991.0.85 | NotificationsnTrapMacAuthEnable | current | The SNMP trap that is generated when MAC-Authentication is enabled on an interface. | |
| 1.3.6.1.4.1.1991.0.86 | NotificationsnTrapMacAuthDisable | current | The SNMP trap that is generated when MAC-Authentication is disabled on an interface. | |
| 1.3.6.1.4.1.1991.0.87 | NotificationsnTrapMacAuthMACAccepted | current | The SNMP trap that is generated when MAC-Authentication is successful on an interface. | |
| 1.3.6.1.4.1.1991.0.88 | NotificationsnTrapMacAuthMACRejected | current | The SNMP trap that is generated when MAC-Authentication is failed on an interface. | |
| 1.3.6.1.4.1.1991.0.89 | NotificationsnTrapMacAuthPortDisabled | current | The SNMP trap that is generated when an interface is disabled due to MAC-Authentication detecting a DOS attack on that interface. | |
| 1.3.6.1.4.1.1991.0.110 | NotificationsnTrapClientLoginReject | current | The SNMP trap that is generated when a login attempt by a telnet or SSH client fails. | |
| 1.3.6.1.4.1.1991.0.111 | NotificationsnTrapLocalUserConfigChange | current | The SNMP trap that is generated when a local user configuration is changed. | |
| 1.3.6.1.4.1.1991.0.112 | NotificationsnTrapVlanConfigChange | current | The SNMP trap that is generated when a vlan configuration is changed. | |
| 1.3.6.1.4.1.1991.0.113 | NotificationsnTrapAclConfigChange | current | The SNMP trap that is generated when a ACL configuration is changed. | |
| 1.3.6.1.4.1.1991.0.114 | NotificationsnTrapMacFilterConfigChange | current | The SNMP trap that is generated when a MAC Filter configuration is changed. | |
| 1.3.6.1.4.1.1991.0.115 | NotificationsnTrapSNMPConfigChange | current | The SNMP trap that is generated when a SNMP configuration is changed. | |
| 1.3.6.1.4.1.1991.0.116 | NotificationsnTrapSyslogConfigChange | current | The SNMP trap that is generated when a Syslog configuration is changed. | |
| 1.3.6.1.4.1.1991.0.117 | NotificationsnTrapPasswordConfigChange | current | The SNMP trap that is generated when enable or line password is changed. | |
| 1.3.6.1.4.1.1991.0.118 | NotificationsnTrapServerStatusChange | current | The SNMP trap that is generated when a server is disabled or enabled. | |
| 1.3.6.1.4.1.1991.0.119 | NotificationsnTrapL4RealServerPortMaxConnectionLimitReached | current | The SNMP trap that is generated when the real server's port reaches maximum number of connections. | |
| 1.3.6.1.4.1.1991.0.120 | NotificationsnTrapL4LinkDown | current | The SNMP trap that is generated when the ISP link goes down. | |
| 1.3.6.1.4.1.1991.0.121 | NotificationsnTrapL4LinkUp | current | The SNMP trap that is generated when the ISP link goes up. | |
| 1.3.6.1.4.1.1991.0.122 | NotificationsnTrapPortPriorityChange | current | The SNMP trap that is generated when the priority of a port is changed. | |
| 1.3.6.1.4.1.1991.0.123 | NotificationsnTrapAutoPortDisableTrigger | current | The SNMP trap that is generated when automatic port disable was triggered. | |
| 1.3.6.1.4.1.1991.0.124 | NotificationsnTrapAutoPortDisableRelease | current | The SNMP trap that is generated when automatic port disable was released. | |
| 1.3.6.1.4.1.1991.0.125 | NotificationsnTrapPnPStatusChange | current | The SNMP trap that is generated when plug-and-play status change. | |
| 1.3.6.1.4.1.1991.0.126 | NotificationsnTrapWirelessIsrpPeerStateChange | current | The SNMP trap that is generated when ISRP Peer changes state. | |
| 1.3.6.1.4.1.1991.0.127 | NotificationsnTrapWirelessStationStateChange | current | The SNMP trap that is generated when a wireless station's state changes. | |
| 1.3.6.1.4.1.1991.0.128 | NotificationsnTrapWirelessStationRoamingEventTriggered | current | The SNMP trap that is generated when we received a MOVE request from the AP | |
| 1.3.6.1.4.1.1991.0.129 | NotificationsnTrapWirelessSappStateChange | current | The SNMP trap that is generated when SAPP between an AP and a FIPS changes state. | |
| 1.3.6.1.4.1.1991.0.130 | NotificationsnTrapExternalPowerConnectionStatus | current | The SNMP trap that is generated when the external power supply connecting or disconnecting to a power over ethernet module. | |
| 1.3.6.1.4.1.1991.0.131 | NotificationsnTrapDot1xSecurityViolation | current | The SNMP trap that is generated when a malicious mac address was detected. | |
| 1.3.6.1.4.1.1991.0.132 | NotificationsnTrapDot1xPortLinkChange | current | The SNMP trap that is generated when software port link status has changed to up or down. | |
| 1.3.6.1.4.1.1991.0.133 | NotificationsnTrapDot1xPortControlChange | current | The SNMP trap that is generated when software port control status has changed to authorize or unauthorize. | |
| 1.3.6.1.4.1.1991.0.134 | NotificationsnTrapDot1xVlanIdChange | current | The SNMP trap that is generated when VLAN ID of a port has changed. | |
| 1.3.6.1.4.1.1991.0.135 | NotificationsnTrapDot1xFilterSetupFailure | current | The SNMP trap that is generated when software failed to setup a filter to a mac address of a port. | |
| 1.3.6.1.4.1.1991.0.136 | NotificationsnTrapDot1xError | current | The SNMP trap that is generated when software detected system error. | |
| 1.3.6.1.4.1.1991.0.137 | NotificationsnTrapPortConfigChange | current | The SNMP trap that is generated when a port configuration is changed. | |
| 1.3.6.1.4.1.1991.0.138 | NotificationsnTrapMacAuthVlanIdChange | current | The SNMP trap that is generated when VLAN ID of a port has changed. | |
| 1.3.6.1.4.1.1991.0.139 | NotificationsnTrapWebAuthEnabled | current | The SNMP trap that is generated when web authentication is enabled. | |
| 1.3.6.1.4.1.1991.0.140 | NotificationsnTrapWebAuthDisabled | current | The SNMP trap that is generated when web authentication is disabled. | |
| 1.3.6.1.4.1.1991.0.141 | NotificationsnTrapIpConfigChange | current | The SNMP trap that is generated when IP system address changes. | |
| 1.3.6.1.4.1.1991.0.142 | NotificationsnTrapIpv6ConfigChange | current | The SNMP trap that is generated when IPv6 system address changes. | |
| 1.3.6.1.4.1.1991.0.143 | NotificationsnTrapMacAuthRadiusTimeout | current | The SNMP trap that is generated when a request from Mac-Auth to RADIUS has not been answered within the retry and time limit. | |
| 1.3.6.1.4.1.1991.0.144 | NotificationsnTrapDot1xRadiusTimeout | current | The SNMP trap that is generated when a request from 802.1x to RADIUS has not been answered within the retry and time limit. | |
| 1.3.6.1.4.1.1991.0.145 | NotificationsnTrapUDLDLinkDown | current | The SNMP trap that is generated when UDLD port link status has changed to down. | |
| 1.3.6.1.4.1.1991.0.146 | NotificationsnTrapUDLDLinkUp | current | The SNMP trap that is generated when UDLD port link status has changed to up. | |
| 1.3.6.1.4.1.1991.0.147 | NotificationsnTrapMacBasedVlanEnabled | current | The SNMP trap that is generated when MAC based VLAN is enabled. | |
| 1.3.6.1.4.1.1991.0.148 | NotificationsnTrapMacBasedVlanDisabled | current | The SNMP trap that is generated when MAC based VLAN is disabled. | |
| 1.3.6.1.4.1.1991.0.149 | NotificationsnTrapChasFanNormal | current | The SNMP trap that is generated when a fan operational status changed from failure to normal. | |
| 1.3.6.1.4.1.1991.0.150 | NotificationsnTrapStpRootGuardDetect | current | The SNMP trap that is generated when VLAN's Root-Guarded port received superior BPDU. | |
| 1.3.6.1.4.1.1991.0.151 | NotificationsnTrapStpRootGuardExpire | current | The SNMP trap that is generated when VLAN's ports's Root-Guard expire. | |
| 1.3.6.1.4.1.1991.0.152 | NotificationsnTrapStpBPDUGuardDetect | current | The SNMP trap that is generated when VLAN's BPDU-guarded port received BPDU . | |
| 1.3.6.1.4.1.1991.0.153 | NotificationsnTrapMstpBPDUGuardDetect | current | The SNMP trap that is generated when BPDU-guarded port received BPDU . | |
| 1.3.6.1.4.1.1991.0.154 | NotificationsnTrapErrorDisableAction | current | The SNMP trap that is generated when Interface error-disable is hit or recovery times out . | |
| 1.3.6.1.4.1.1991.0.155 | NotificationsnTrapLACPLinkStateChange | current | The SNMP trap that is generated when LACP port changes its state. | |
| 1.3.6.1.4.1.1991.0.156 | NotificationsnTrapOpticalMonitoringNotFoundryOptics | current | The SNMP trap that is generated if optical monitoring is enabled but optics vendor is not Ruckus Wireless, Inc. | |
| 1.3.6.1.4.1.1991.0.157 | NotificationsnTrapOpticalMonitoringFoundryOpticsNotCapable | current | The SNMP trap that is generated if optical monitoring is enabled but the Ruckus Wireless optic is not capable. | |
| 1.3.6.1.4.1.1991.0.158 | NotificationsnTrapStaticMulticastMacConfigAdd | current | The SNMP trap that is generated if a new entry is added to static multicast mac configuration table. Format 1: Static Mac entry with Mac Address <xxxx:xxxx:xxx… | |
| 1.3.6.1.4.1.1991.0.159 | NotificationsnTrapStaticMulticastMacConfigRemove | current | The SNMP trap that is generated if an entry is removed from static multicast mac configuration table . Format 1: Static Mac entry with Mac Address <xxxx:xxxx:x… | |
| 1.3.6.1.4.1.1991.0.160 | NotificationsnTrapSTPBPDUGuardExpire | current | The SNMP notification that is generated when a port is re-enabled after being disabled due to BPDU Guard Violation. Format: STP: BPDU Guard re-enabled on VLAN … | |
| 1.3.6.1.4.1.1991.0.161 | NotificationsnTrapPortLoopDetection | current | The SNMP notification is generated when a port loop is detected. Format: LOOP DETECTION: VLAN <id>, port <slot>/<port> detect, putting into err-disable state | |
| 1.3.6.1.4.1.1991.0.162 | NotificationsnTrapNoFreeTcamEntry | current | The SNMP trap that is generated when system is running out of TCAM spaces allocated for routing entries. | |
| 1.3.6.1.4.1.1991.0.163 | NotificationsnTrapStackingMasterElected | current | The SNMP trap that is generated when a unit is elected as Master unit for the stacking system. | |
| 1.3.6.1.4.1.1991.0.164 | NotificationsnTrapStackingUnitAdded | current | The SNMP trap that is generated when a unit has been added to the stacking system. | |
| 1.3.6.1.4.1.1991.0.165 | NotificationsnTrapStackingUnitDeleted | current | The SNMP trap that is generated when a unit has been deleted from the stacking system. | |
| 1.3.6.1.4.1.1991.0.166 | NotificationsnTrapStackingChasPwrSupplyOK | current | The SNMP trap that is generated when a power supply operational status changed from failure to normal for a stacking system. | |
| 1.3.6.1.4.1.1991.0.167 | NotificationsnTrapStackingChasPwrSupplyFailed | current | The SNMP trap that is generated when a power supply operational status changed from normal to failure for a stacking system. | |
| 1.3.6.1.4.1.1991.0.168 | NotificationsnTrapStackingChasFanNormal | current | The SNMP trap that is generated when a fan operational status changed from failure to normal for a stacking system | |
| 1.3.6.1.4.1.1991.0.169 | NotificationsnTrapStackingChasFanFailed | current | The SNMP trap that is generated when a fan fails to operate normally for a stacking system. | |
| 1.3.6.1.4.1.1991.0.170 | NotificationsnTrapStackingManagementMACChanged | current | The SNMP trap that is generated when the managemnet MAC address of a stacking system has been changed. | |
| 1.3.6.1.4.1.1991.0.171 | NotificationsnTrapStackingTemperatureWarning | current | The SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold for a stack sytem. | |
| 1.3.6.1.4.1.1991.0.172 | NotificationsnTrapIfIndexAssignmentChanged | current | The SNMP trap that is generated when the Interface Index (IfIndex) assignment for the physical interfaces was changed. | |
| 1.3.6.1.4.1.1991.0.173 | NotificationsnTrapPBRConfigChanged | current | The SNMP trap that is generated when a Policy Based Routing (PBR) routemap is bound or unbound either globally or to an interface. | |
| 1.3.6.1.4.1.1991.0.174 | NotificationsnTrapChasPwrSupplyRPSAdd | current | The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is added to the system. | |
| 1.3.6.1.4.1.1991.0.175 | NotificationsnTrapChasPwrSupplyRPSRemove | current | The SNMP trap that is generated when an External Redundant Power Supply (RPS2-EIF) is removed from the system. | |
| 1.3.6.1.4.1.1991.0.176 | NotificationsnTrapModuleStatusChange | current | The SNMP notification that is generated when a module's operational state changes. The management entity receiving the notification can identify the module and… | |
| 1.3.6.1.4.1.1991.0.177 | NotificationsnTrapChasHighSpeedFansNeeded | current | The SNMP trap that is generated when chassis doesn't have high speed fans for specific modules | |
| 1.3.6.1.4.1.1991.0.178 | NotificationsnTrapSysmaxReverted | current | The SNMP trap that is generated when the revertible sysmax elements are reverted during the card bringup if they can not be accomodated in the available memory. | |
| 1.3.6.1.4.1.1991.0.179 | NotificationsnTrapSysmaxLeftLowMem | current | The SNMP trap that is generated when its found during bootup that the configured sysmax set shall leave less than 10% available memory free. | |
| 1.3.6.1.4.1.1991.0.180 | NotificationsnTrapSysMemoryLowThreshold | current | The SNMP trap that is generated when the available dynamic memory in a card is below 5% of the installed physical memory. | |
| 1.3.6.1.4.1.1991.0.181 | NotificationsnTrapSysMemoryOutThreshold | current | The SNMP trap that is generated when the dynamic memory fails to be allocated in a system. | |
| 1.3.6.1.4.1.1991.0.182 | NotificationsnTrapLinkOAMLinkDown | current | The SNMP trap that is generated when Link-OAM port link status has changed to down. | |
| 1.3.6.1.4.1.1991.0.183 | NotificationsnTrapLinkOAMLinkUp | current | The SNMP trap that is generated when Link-OAM port link status has changed to up. | |
| 1.3.6.1.4.1.1991.0.184 | NotificationsnTrapI2CAccessLog | current | The SNMP trap that is generated to provide information about state of the management module's I2C accesses. | |
| 1.3.6.1.4.1.1991.0.185 | NotificationsnTrapLinkOAMLoopbackEntered | current | The SNMP trap that is generated when Link-OAM port has entered loopback mode. The link is not useful for data transfer any more. | |
| 1.3.6.1.4.1.1991.0.186 | NotificationsnTrapLinkOAMLoopbackCleared | current | The SNMP trap that is generated when Link-OAM port has entered loopback mode. The link is not useful for data transfer any more. | |
| 1.3.6.1.4.1.1991.0.187 | NotificationsnTrapLicenseAdded | deprecated | The SNMP trap that is generated when a new license is added to the system. | |
| 1.3.6.1.4.1.1991.0.188 | NotificationsnTrapLicenseRemoved | deprecated | The SNMP trap that is generated when an existing license is removed from the system. | |
| 1.3.6.1.4.1.1991.0.189 | NotificationsnTrapLicenseExpires | deprecated | The SNMP trap that is generated when a trial license is about to expire. This trap is generated daily for last 3 days and every 2 hours on the last day of expi… | |
| 1.3.6.1.4.1.1991.0.190 | NotificationsnTrapLicenseExpired | deprecated | The SNMP trap that is generated when a trial license has expired. | |
| 1.3.6.1.4.1.1991.0.191 | NotificationsnTrapUDLDCrcFailureDetected | current | The SNMP trap that is generated when UDLD detects CRC failures on PDUs received on a port | |
| 1.3.6.1.4.1.1991.0.196 | NotificationsnTrapStackingStandbyElected | current | The SNMP trap that is generated when a unit is elected as Standby unit for the stacking system. | |
| 1.3.6.1.4.1.1991.0.197 | NotificationsnTrapMacMoveThresholdRate | current | The SNMP notification is generated when MAC movement exceeding the certain threshold for a sampling interval is detected. Format: Mac-Move threshold-rate: MAC … | |
| 1.3.6.1.4.1.1991.0.198 | NotificationsnTrapMacMoveIntervalHistory | current | The SNMP notification is generated every user configured interval, summarizing the moves in the interval . Format: Mac-Move Interval-History: <#macs> macs move… | |
| 1.3.6.1.4.1.1991.0.199 | NotificationsnTrapStackingMixedModeChanged | current | The SNMP trap that is generated when a stacking system mode is changed. Format: The stacking system is changed to Mixed Stacking mode | |
| 1.3.6.1.4.1.1991.0.200 | NotificationsnTrapSysMonErrorDetect | current | The SNMP notification is generated when SYSMON detects internal error. | |
| 1.3.6.1.4.1.1991.0.201 | NotificationsnTrapMacNotification | current | The SNMP notification is generated when MAC event(s) is(are) detected. Format: MAC-Event:MAC:<mac>-VLAN:<vlan-id>-PORT:<port-id>-ACT:<action>::MAC:<mac>-VLAN:<… | |
| 1.3.6.1.4.1.1991.0.202 | NotificationsnTrapMacEventBufferFull | current | The SNMP notification is generated when MAC event buffer full is detected. Format: MAC-Event: The Buffer is full, FDB table walk is required | |
| 1.3.6.1.4.1.1991.0.203 | NotificationsnTrapStpDesignatedGuardDetect | current | The SNMP trap that is generated when VLAN's ports's Designated-Guard detect. | |
| 1.3.6.1.4.1.1991.0.204 | NotificationsnTrapStpDesignatedGuardDisable | current | The SNMP trap that is generated when VLAN's ports's Designated-Guard disable. | |
| 1.3.6.1.4.1.1991.0.205 | NotificationsnTrapLicenseNNLLTrialNotify | deprecated | The SNMP trap that is generated when a non-node locked licensed feature is enabled with no a non-node locked license installed. Format: Stack <stack_id>: Use o… | |
| 1.3.6.1.4.1.1991.0.206 | NotificationsnTrapLicenseNNLLTrialExpiry | deprecated | The SNMP trap that is generated when a non-node locked licensed feature is enabled after 30-44 days with no a non-node locked license installed. This message w… | |
| 1.3.6.1.4.1.1991.0.207 | NotificationsnTrapLicenseNNLLNonCompliant | deprecated | The SNMP trap that is generated when a non-node locked licensed feature is enabled after 45+ days whit no a non-node locked license installed. Or deletion of a… | |
| 1.3.6.1.4.1.1991.0.208 | NotificationsnTrapLicenseNNLLDelete | deprecated | The SNMP trap that is generated when a non-node locked licensed feature is enabled after a non-node locked license is deleted. Format: Stack <shack_id>: The <l… | |
| 1.3.6.1.4.1.1991.0.209 | NotificationsnTrapStackingShowStackConnect | current | The SNMP trap that is generated when the background diagnosis detects the connection errors to notify the user to check the connections in a stacking system Fo… | |
| 1.3.6.1.4.1.1991.0.210 | NotificationsnTrapStackingStandByChangedStandalone | current | The SNMP trap that is generated when a unit is changed from Standby to Stand alone when the active unit is down. | |
| 1.3.6.1.4.1.1991.0.211 | NotificationsnTrapBroadcastlimit | current | The SNMP trap that is generated after reached the Broadcast limit. | |
| 1.3.6.1.4.1.1991.0.212 | NotificationsnTrapMulticastlimit | current | The SNMP trap that is generated after reached the Multicast limit. | |
| 1.3.6.1.4.1.1991.0.213 | NotificationsnTrapUnicastlimit | current | The SNMP trap that is generated after reached the Unknown Unicast limit. | |
| 1.3.6.1.4.1.1991.0.214 | NotificationsnTrapPsuFanStateChange | current | The SNMP trap that is generated when the PSU fan status changed. | |
| 1.3.6.1.4.1.1991.0.215 | NotificationsnTrapStackISSUSystemCompleted | current | The SNMP trap that is generated when system completed stack upgrade process. Format: Stack: system upgrade completed | |
| 1.3.6.1.4.1.1991.0.216 | NotificationsnTrapStackISSUSystemFailed | current | The SNMP trap that is generated when system failed stack upgrade process. Format: Stack: system upgrade failed | |
| 1.3.6.1.4.1.1991.0.217 | NotificationsnTrapStackISSUUnitCompleted | current | The SNMP trap that is generated when unit completed upgrade process. Format: Stack: stack unit <unit_id> completed upgrade | |
| 1.3.6.1.4.1.1991.0.218 | NotificationsnTrapStackISSUUnitFailed | current | The SNMP trap that is generated when unit failed upgrade process. Format: Stack: system upgrade failed, stack unit <unit_id> is in failure state | |
| 1.3.6.1.4.1.1991.0.219 | NotificationsnTrapStackISSUSystemStart | current | The SNMP trap that is generated when system starts stack upgrade process. Format: Stack: system upgrade started and most of user interfaces are blocked | |
| 1.3.6.1.4.1.1991.0.220 | NotificationsnTrapStackingIgnoreShutdownTemperatureThresholdEnabled | current | The SNMP trap that is generated when Ignore Shutdown Temperature Threshold is enabled for a stack unit. | |
| 1.3.6.1.4.1.1991.0.221 | NotificationsnTrapStackingIgnoreShutdownTemperatureThresholdDisabled | current | The SNMP trap that is generated when Ignore Shutdown Temperature Threshold is disabled for a stack unit. | |
| 1.3.6.1.4.1.1991.0.222 | NotificationsnTrapGlobalBattleShortModeEnabled | current | The SNMP trap that is generated when battleshort mode is enabled at global level. | |
| 1.3.6.1.4.1.1991.0.223 | NotificationsnTrapGlobalBattleShortModeDisabled | current | The SNMP trap that is generated when battleshort mode is disabled at global level.. | |
| 1.3.6.1.4.1.1991.0.224 | NotificationsnTrapStackSAUOptionChange | current | The SNMP trap that is generated when SAU license option is changed. Format: Stack: SAU license option on unit <unit_id> is changed to <sau_type> | |
| 1.3.6.1.4.1.1991.0.225 | NotificationsnTrapPMSProtectActivated | current | The SNMP trap that is generated when port security violation protect is activated Format: Security: Port Security violation protect activated on interface ethe… | |
| 1.3.6.1.4.1.1991.0.226 | NotificationsnTrapPMSProtectDeactivated | current | The SNMP trap that is generated when port security violation protect is de-activated Format: Security: Port Security violation protect de-activated on interfac… | |
| 1.3.6.1.4.1.1991.0.227 | NotificationsnTrapStackSAUOptionDeleted | current | The SNMP trap that is generated when SAU license option is deleted. Format: Stack: unit <unit_id> deleted SAU license option <sau_type> | |
| 1.3.6.1.4.1.1991.0.228 | NotificationsnTrapStackCloudManagerConnected | current | The SNMP trap that is generated when Clold manager is connected. Format: Cloud: Cloud manager is connected. All local configuration interfaces are locked | |
| 1.3.6.1.4.1.1991.0.229 | NotificationsnTrapStackCloudManagerDisconnected | current | The SNMP trap that is generated when Clold manager is disconnected. Format: Cloud: Cloud manager is connected. All local configuration interfaces are available | |
| 1.3.6.1.4.1.1991.0.230 | NotificationsnTrapManager2FactorAuthenticationEnabled | current | The SNMP trap that is generated when Manager Two-Factor Authentication is enabled. Format: MGMT Agent: Manager 2 Factor Authentication enabled. | |
| 1.3.6.1.4.1.1991.0.231 | NotificationsnTrapManager2FactorAuthenticationDisabled | current | The SNMP trap that is generated when Manager Two-Factor Authentication is disabled. Format: MGMT Agent: Manager 2 Factor Authentication disabled. | |
| 1.3.6.1.4.1.1991.0.1000 | NotificationsnTrapChasFanOK | current | The SNMP trap that is generated when a fan operational status changed from failure to normal or change in the fan speed due to temperature variations downwards. | |
| 1.3.6.1.4.1.1991.0.1001 | NotificationsnTrapTemperatureOK | current | The SNMP trap that is generated when the actual temperature reading is below the warning temperature threshold. | |
| 1.3.6.1.4.1.1991.0.1002 | NotificationsnTrapCAMOverflow | current | The SNMP trap that is generated when any CAM partition becomes full. | |
| 1.3.6.1.4.1.1991.0.1003 | NotificationsnTrapOpticalMonitoringWarning | current | The SNMP trap that is generated if there is a warning during optical monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the cau… | |
| 1.3.6.1.4.1.1991.0.1004 | NotificationsnTrapOpticalMonitoringAlarm | current | The SNMP trap that is generated if there is an alarm during optical monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the caus… | |
| 1.3.6.1.4.1.1991.0.1005 | NotificationsnTrapOpticalMonitoringError | current | The SNMP trap that is generated if there is an error during optical monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the caus… | |
| 1.3.6.1.4.1.1991.0.1006 | NotificationsnTrapPosMonitoringWarning | current | The SNMP trap that is generated if there is a warning during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the c… | |
| 1.3.6.1.4.1.1991.0.1007 | NotificationsnTrapPosMonitoringAlarm | current | The SNMP trap that is generated if there is an alarm up/down during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message o… | |
| 1.3.6.1.4.1.1991.0.1008 | NotificationsnTrapPosMonitoringError | current | The SNMP trap that is generated if there is an error during POS alarm monitoring. The first varbind, snAgGblTrapMessage, will have a detailed message on the ca… | |
| 1.3.6.1.4.1.1991.0.1009 | NotificationsnTrapXfpSfpIncompatibleOptics | current | The SNMP trap that is generated if optics is incompatible with port configuration. | |
| 1.3.6.1.4.1.1991.0.1015 | NotificationsnTrapTMLoggingStart | current | The SNMP trap that is generated if TM logging is started by an event trigger. | |
| 1.3.6.1.4.1.1991.0.1016 | NotificationsnTrapTMLoggingStop | current | The SNMP trap that is generated if TM logging stopped due to storage full. | |
| 1.3.6.1.4.1.1991.0.1017 | NotificationsnTrapTMLoggingRestart | current | The SNMP trap that is generated if TM logging restarted after user clearing the log. | |
| 1.3.6.1.4.1.1991.0.1018 | NotificationsnTrapXfpSfpNotFoundryOptics | current | The SNMP trap that is generated if optics vendor is not Ruckus Wireless, Inc. | |
| 1.3.6.1.4.1.1991.0.1019 | NotificationsnTrapTMRecoverySlotReset | current | The SNMP trap that is generated when TM recovery slot reset is triggered. | |
| 1.3.6.1.4.1.1991.0.1020 | NotificationsnTrapTMEgressDataError | current | The SNMP trap that is generated when system detects egress data errors on Traffic Manager. For e.g. Fabric Monitoring : TM Egress data errors detected on LP <n… | |
| 1.3.6.1.4.1.1991.0.1100 | NotificationsnTrapSFMLinkDown | current | The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is down. For eg. Fabric Monitoring Link Down : SFM <num>/FE <num>/Lin… | |
| 1.3.6.1.4.1.1991.0.1101 | NotificationsnTrapSFMLinkUp | current | The SNMP trap that is generated when a link from LP Traffic Manager to SFM Fabric Element is up. For eg. Fabric Monitoring Link Up : SFM <num>/FE <num>/Link <n… | |
| 1.3.6.1.4.1.1991.0.1102 | NotificationsnTrapSFMAccessError | current | The SNMP trap that is generated when system fails to access a SFM Fabric Element. For e.g. Fabric Monitoring : Device access failure in SFM <num>/FE <num> | |
| 1.3.6.1.4.1.1991.0.1200 | NotificationsnTrapChassisFanSpeedLow | current | The SNMP trap that is generated when all chassis fans change to low speed. | |
| 1.3.6.1.4.1.1991.0.1201 | NotificationsnTrapChassisFanSpeedMedium | current | The SNMP trap that is generated when all chassis fans change to medium speed. | |
| 1.3.6.1.4.1.1991.0.1202 | NotificationsnTrapChassisFanSpeedMedHigh | current | The SNMP trap that is generated when all chassis fans change to medium high speed. | |
| 1.3.6.1.4.1.1991.0.1203 | NotificationsnTrapChassisFanSpeedHigh | current | The SNMP trap that is generated when all chassis fans change to high speed. | |
| 1.3.6.1.4.1.1991.0.1207 | NotificationsnTrapFIPSModeEnable | current | The SNMP trap that is generated when FIPS mode is enabled. | |
| 1.3.6.1.4.1.1991.0.1208 | NotificationsnTrapFIPSModeDisable | current | The SNMP trap that is generated when FIPS mode is disabled.The zeroization of host keys and shared secret keys is done after this trap is sent. | |
| 1.3.6.1.4.1.1991.0.1209 | NotificationsnTrapFIPSHostZeroized | current | The SNMP trap that is generated when host keys are zeroized in FIPS mode | |
| 1.3.6.1.4.1.1991.0.1210 | NotificationsnTrapFIPSSharedSecretZeroized | current | The SNMP trap that is generated when shared secret are zeroized in FIPS mode | |
| 1.3.6.1.4.1.1991.0.1211 | NotificationsnTrapFIPSPOSTStatus | current | The SNMP trap that is generated after POST. | |
| 1.3.6.1.4.1.1991.0.1212 | NotificationsnTrapFIPSCryptoModuleFailure | current | The SNMP trap that is generated on cryptographic module failure. | |
| 1.3.6.1.4.1.1991.1 | Nodeproducts | |||
| 1.3.6.1.4.1.1991.1.1 | Nodeswitch | |||
| 1.3.6.1.4.1.1991.1.1.1 | NodesnChassis | |||
| 1.3.6.1.4.1.1991.1.1.1.1 | NodesnChasGen | |||
| 1.3.6.1.4.1.1991.1.1.1.1.1 | ScalarsnChasType | read-only | current | The chassis type represents the type of Ruckus Wireless product being managed. |
| 1.3.6.1.4.1.1991.1.1.1.1.2 | ScalarsnChasSerNum | read-only | current | The serial number of the chassis. If the serial number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.1991.1.1.1.1.3 | ScalarsnChasPwrSupplyStatus | read-only | deprecated | This object is being deprecated, please use snChasPwrSupplyTable instead. A bit array that contains the value of the Chassis Power Supplies. This is a packed b… |
| 1.3.6.1.4.1.1991.1.1.1.1.4 | ScalarsnChasFanStatus | read-only | deprecated | This object is being deprecated, please use snChasFanTable instead. A bit array that contains the value of the fan status. This is a packed bit string. The sta… |
| 1.3.6.1.4.1.1991.1.1.1.1.5 | ScalarsnChasMainBrdDescription | read-only | current | The main board description string. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.6 | ScalarsnChasMainPortTotal | read-only | current | The total number of ports for the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.7 | ScalarsnChasExpBrdDescription | read-only | current | The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.8 | ScalarsnChasExpPortTotal | read-only | current | The total number of ports for the expansion board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.1.1.9 | ScalarsnChasStatusLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.10 | ScalarsnChasTrafficLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.11 | ScalarsnChasMediaLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.12 | ScalarsnChasEnablePwrSupplyTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate power supply failure traps. |
| 1.3.6.1.4.1.1991.1.1.1.1.13 | ScalarsnChasMainBrdId | read-only | current | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.1991.1.1.1.1.14 | ScalarsnChasExpBrdId | read-only | current | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.1991.1.1.1.1.15 | ScalarsnChasSpeedLeds | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.1.1.16 | ScalarsnChasEnableFanTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate fan failure traps. |
| 1.3.6.1.4.1.1991.1.1.1.1.17 | ScalarsnChasIdNumber | read-write | current | An administratively-assigned chassis identity number, used by inventory control. |
| 1.3.6.1.4.1.1991.1.1.1.1.18 | ScalarsnChasActualTemperature | read-only | current | Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applic… |
| 1.3.6.1.4.1.1991.1.1.1.1.19 | ScalarsnChasWarningTemperature | read-write | current | Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only manageme… |
| 1.3.6.1.4.1.1991.1.1.1.1.20 | ScalarsnChasShutdownTemperature | read-write | current | Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. O… |
| 1.3.6.1.4.1.1991.1.1.1.1.21 | ScalarsnChasEnableTempWarnTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate temperature warning traps. |
| 1.3.6.1.4.1.1991.1.1.1.1.22 | ScalarsnChasFlashCard | read-only | current | A bit array that contains the value of the flash card status. This is a packed bit string. The status of each flash card is encoded into one bit. bit value mea… |
| 1.3.6.1.4.1.1991.1.1.1.1.23 | ScalarsnChasFlashCardLeds | read-only | current | A bit array that contains the value of the flash card LEDs. This is a packed bit string; each LED is encoded into 1 bit for each flash card. bit value meaning … |
| 1.3.6.1.4.1.1991.1.1.1.1.24 | ScalarsnChasNumSlots | read-only | current | Number of slots of the chassis. |
| 1.3.6.1.4.1.1991.1.1.1.1.25 | ScalarsnChasArchitectureType | read-only | current | Architecture type. |
| 1.3.6.1.4.1.1991.1.1.1.1.26 | ScalarsnChasProductType | read-only | current | Product type. |
| 1.3.6.1.4.1.1991.1.1.1.1.30 | ScalarsnChasGlobalIgnoreShutdownTemperature | read-write | current | Enable/Disable the temperature threshold shutdown (Battleshort mode) feature at global level. Able to fetch the temperature threshold shutdown (Battleshort mod… |
| 1.3.6.1.4.1.1991.1.1.1.2 | NodesnChasPwr | |||
| 1.3.6.1.4.1.1991.1.1.1.2.1 | TablesnChasPwrSupplyTable | not-accessible | current | A table of each power supply information. Only installed power supply appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1 | RowsnChasPwrSupplyEntry | not-accessible | current | A row in the power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1.1 | ColumnsnChasPwrSupplyIndex | read-only | current | The index to power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1.2 | ColumnsnChasPwrSupplyDescription | read-only | current | The power supply description string. |
| 1.3.6.1.4.1.1991.1.1.1.2.1.1.3 | ColumnsnChasPwrSupplyOperStatus | read-only | current | The power supply operation status. |
| 1.3.6.1.4.1.1991.1.1.1.2.2 | TablesnChasPwrSupply2Table | not-accessible | current | A table of each power supply information for each unit. Only installed power supply appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1 | RowsnChasPwrSupply2Entry | not-accessible | current | A row in the power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.1 | ColumnsnChasPwrSupply2Unit | read-only | current | The index to power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.2 | ColumnsnChasPwrSupply2Index | read-only | current | The index to power supply table. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.3 | ColumnsnChasPwrSupply2Description | read-only | current | The power supply description string. |
| 1.3.6.1.4.1.1991.1.1.1.2.2.1.4 | ColumnsnChasPwrSupply2OperStatus | read-only | current | The power supply operation status. |
| 1.3.6.1.4.1.1991.1.1.1.3 | NodesnChasFan | |||
| 1.3.6.1.4.1.1991.1.1.1.3.1 | TablesnChasFanTable | not-accessible | current | A table of each fan information. Only installed fan appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1 | RowsnChasFanEntry | not-accessible | current | A row in the fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1.1 | ColumnsnChasFanIndex | read-only | current | The index to fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1.2 | ColumnsnChasFanDescription | read-only | current | The fan description string. |
| 1.3.6.1.4.1.1991.1.1.1.3.1.1.3 | ColumnsnChasFanOperStatus | read-only | current | The fan operation status. |
| 1.3.6.1.4.1.1991.1.1.1.3.2 | TablesnChasFan2Table | not-accessible | current | A table of each fan information for each unit. Only installed fan appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1 | RowsnChasFan2Entry | not-accessible | current | A row in the fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.1 | ColumnsnChasFan2Unit | read-only | current | The index to fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.2 | ColumnsnChasFan2Index | read-only | current | The index to fan table. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.3 | ColumnsnChasFan2Description | read-only | current | The fan description string. |
| 1.3.6.1.4.1.1991.1.1.1.3.2.1.4 | ColumnsnChasFan2OperStatus | read-only | current | The fan operation status. |
| 1.3.6.1.4.1.1991.1.1.1.4 | NodesnChasUnit | |||
| 1.3.6.1.4.1.1991.1.1.1.4.1 | TablesnChasUnitTable | not-accessible | current | A table of chassis information for each unit. Only active chassis appears in a table row. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1 | RowsnChasUnitEntry | not-accessible | current | A row in the chassis table. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.1 | ColumnsnChasUnitIndex | read-only | current | The index to chassis table. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.2 | ColumnsnChasUnitSerNum | read-only | current | The serial number of the chassis for each unit. If the serial number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.3 | ColumnsnChasUnitNumSlots | read-only | current | Number of slots of the chassis for each unit. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.4 | ColumnsnChasUnitActualTemperature | read-only | current | Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applic… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.5 | ColumnsnChasUnitWarningTemperature | read-write | current | Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only manageme… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.6 | ColumnsnChasUnitShutdownTemperature | read-only | current | Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. O… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.7 | ColumnsnChasUnitPartNum | read-only | current | The part number of the chassis for each unit. If the part number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.8 | ColumnsnChasUnitIgnoreShutdownTemperature | read-write | current | Enable/Disable the temperature threshold shutdown (Battleshort mode) feature on the unit specific. Able to fetch the temperature threshold shutdown (Battleshor… |
| 1.3.6.1.4.1.1991.1.1.1.4.1.1.9 | ColumnsnChasUnitFanless | read-write | current | Fanless mode can be enabled or disabled on certain FI devices. none (0): not applicable to the device. enabled(1): fanless mode is enabled on the device disabl… |
| 1.3.6.1.4.1.1991.1.1.2 | NodesnAgentSys | |||
| 1.3.6.1.4.1.1991.1.1.2.1 | NodesnAgentGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.1.1 | ScalarsnAgReload | read-write | current | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running busy(4)......… |
| 1.3.6.1.4.1.1991.1.1.2.1.2 | ScalarsnAgEraseNVRAM | read-write | deprecated | This object is not supported from FI9010, please use snAgEraseConfig Action object to erase NVRAM of the agent. The following values can only be read: normal(1… |
| 1.3.6.1.4.1.1991.1.1.2.1.3 | ScalarsnAgWriteNVRAM | read-write | deprecated | This object is not supported from FI9010, please use snAgSaveConfig Action object to save all configuration info to NVRAM of the agent. The following values ca… |
| 1.3.6.1.4.1.1991.1.1.2.1.4 | ScalarsnAgConfigFromNVRAM | not-accessible | deprecated | This object is not supported from FI9010, Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)… |
| 1.3.6.1.4.1.1991.1.1.2.1.5 | ScalarsnAgTftpServerIp | read-write | deprecated | The tftp server address, this will be used for both download/upload image file and config file. |
| 1.3.6.1.4.1.1991.1.1.2.1.6 | ScalarsnAgImgFname | read-write | current | Name of the image file including path currently associated with the system. When the object is not used, the value is a zero length string. |
| 1.3.6.1.4.1.1991.1.1.2.1.7 | ScalarsnAgImgLoad | read-write | current | Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loa… |
| 1.3.6.1.4.1.1991.1.1.2.1.8 | ScalarsnAgCfgFname | read-write | current | Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a value which contains multiple f… |
| 1.3.6.1.4.1.1991.1.1.2.1.9 | ScalarsnAgCfgLoad | read-write | current | Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to operationError(17) and tftpWrongF… |
| 1.3.6.1.4.1.1991.1.1.2.1.10 | ScalarsnAgDefGwayIp | read-write | current | The default gateway (router) address. |
| 1.3.6.1.4.1.1991.1.1.2.1.11 | ScalarsnAgImgVer | read-only | current | The version of the running software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.1991.1.1.2.1.12 | ScalarsnAgFlashImgVer | read-only | current | The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, th… |
| 1.3.6.1.4.1.1991.1.1.2.1.13 | ScalarsnAgGblIfIpAddr | read-write | current | The interface ip address. |
| 1.3.6.1.4.1.1991.1.1.2.1.14 | ScalarsnAgGblIfIpMask | read-write | current | The interface ip address mask. |
| 1.3.6.1.4.1.1991.1.1.2.1.15 | ScalarsnAgGblPassword | read-write | deprecated | System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an null string. By default, this object n… |
| 1.3.6.1.4.1.1991.1.1.2.1.16 | ScalarsnAgTrpRcvrCurEntry | read-only | current | The current total entries of the Trap Receiver Table are created. |
| 1.3.6.1.4.1.1991.1.1.2.1.19 | ScalarsnAgGblDataRetrieveMode | read-write | current | By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. nextbootCfg(0).........the nex… |
| 1.3.6.1.4.1.1991.1.1.2.1.20 | ScalarsnAgSystemLog | read-write | current | The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is the value decribed below and fol… |
| 1.3.6.1.4.1.1991.1.1.2.1.21 | ScalarsnAgGblEnableColdStartTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate cold start traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.22 | ScalarsnAgGblEnableLinkUpTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate link up traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.23 | ScalarsnAgGblEnableLinkDownTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate link down traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.24 | ScalarsnAgGblPasswordChangeMode | read-only | current | Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management station, console command line interf… |
| 1.3.6.1.4.1.1991.1.1.2.1.25 | ScalarsnAgGblReadOnlyCommunity | read-write | current | SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on this o… |
| 1.3.6.1.4.1.1991.1.1.2.1.26 | ScalarsnAgGblReadWriteCommunity | read-write | current | SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on … |
| 1.3.6.1.4.1.1991.1.1.2.1.27 | ScalarsnAgGblCurrentSecurityLevel | read-only | current | This represnts the current log-in security level. Each level of security requires a password to permit user for different system configurations. |
| 1.3.6.1.4.1.1991.1.1.2.1.28 | ScalarsnAgGblSecurityLevelSet | read-write | current | This shows which the security level password to be set. |
| 1.3.6.1.4.1.1991.1.1.2.1.29 | ScalarsnAgGblLevelPasswordsMask | read-only | current | This shows the bitmap of level passwords which successfully assigned to the system. |
| 1.3.6.1.4.1.1991.1.1.2.1.30 | ScalarsnAgGblQueueOverflow | read-only | current | false - The device queues are not overflow. true - The device queues are overflow. |
| 1.3.6.1.4.1.1991.1.1.2.1.31 | ScalarsnAgGblBufferShortage | read-only | current | false - The device buffers are adequate. true - The device buffers are in shortage. |
| 1.3.6.1.4.1.1991.1.1.2.1.32 | ScalarsnAgGblDmaFailure | read-only | current | false - The device DMAs are in good condition. true - One of the DMAs in the device fails. |
| 1.3.6.1.4.1.1991.1.1.2.1.33 | ScalarsnAgGblResourceLowWarning | read-only | current | false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning. |
| 1.3.6.1.4.1.1991.1.1.2.1.34 | ScalarsnAgGblExcessiveErrorWarning | read-only | current | false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have. |
| 1.3.6.1.4.1.1991.1.1.2.1.35 | ScalarsnAgGblCpuUtilData | read-only | current | The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilColle… |
| 1.3.6.1.4.1.1991.1.1.2.1.36 | ScalarsnAgGblCpuUtilCollect | read-write | deprecated | enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics collection of utilization of the… |
| 1.3.6.1.4.1.1991.1.1.2.1.37 | ScalarsnAgGblTelnetTimeout | read-write | current | Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one minute. |
| 1.3.6.1.4.1.1991.1.1.2.1.38 | ScalarsnAgGblEnableWebMgmt | read-write | current | Enable/disable web management. |
| 1.3.6.1.4.1.1991.1.1.2.1.39 | ScalarsnAgGblSecurityLevelBinding | read-only | current | This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. |
| 1.3.6.1.4.1.1991.1.1.2.1.40 | ScalarsnAgGblEnableSLB | read-only | current | Enable/disable Server Load Balancing. |
| 1.3.6.1.4.1.1991.1.1.2.1.41 | ScalarsnAgSoftwareFeature | read-only | current | A bit string representing the software feature of the running switch/router image. These features were conditional compiled to different product images. For ea… |
| 1.3.6.1.4.1.1991.1.1.2.1.42 | ScalarsnAgGblEnableModuleInsertedTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.43 | ScalarsnAgGblEnableModuleRemovedTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps. |
| 1.3.6.1.4.1.1991.1.1.2.1.44 | ScalarsnAgGblTrapMessage | read-only | current | A generic trap message string. |
| 1.3.6.1.4.1.1991.1.1.2.1.45 | ScalarsnAgGblEnableTelnetServer | read-write | current | Enable or disable telnet server in device. |
| 1.3.6.1.4.1.1991.1.1.2.1.46 | ScalarsnAgGblTelnetPassword | read-write | current | Telnet Access Password and this is only useful for write operation. A read operation get a null string. Set operation on this object is allowed only if command… |
| 1.3.6.1.4.1.1991.1.1.2.1.47 | ScalarsnAgBuildDate | read-only | current | The date of the built software. |
| 1.3.6.1.4.1.1991.1.1.2.1.48 | ScalarsnAgBuildtime | read-only | current | The time of the built software. |
| 1.3.6.1.4.1.1991.1.1.2.1.49 | ScalarsnAgBuildVer | read-only | current | The version of the built software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.1991.1.1.2.1.50 | ScalarsnAgGblCpuUtil1SecAvg | read-only | current | The statistics collection of 1 second CPU utilization. |
| 1.3.6.1.4.1.1991.1.1.2.1.51 | ScalarsnAgGblCpuUtil5SecAvg | read-only | current | The statistics collection of 5 second CPU utilization. |
| 1.3.6.1.4.1.1991.1.1.2.1.52 | ScalarsnAgGblCpuUtil1MinAvg | read-only | current | The statistics collection of 1 minute CPU utilization. |
| 1.3.6.1.4.1.1991.1.1.2.1.53 | ScalarsnAgGblDynMemUtil | read-only | deprecated | The system dynamic memory utilization, in unit of percentage. Deprecated: Refer to snAgSystemDRAMUtil |
| 1.3.6.1.4.1.1991.1.1.2.1.54 | ScalarsnAgGblDynMemTotal | read-only | deprecated | The total amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMTotal |
| 1.3.6.1.4.1.1991.1.1.2.1.55 | ScalarsnAgGblDynMemFree | read-only | deprecated | The free amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMFree |
| 1.3.6.1.4.1.1991.1.1.2.1.56 | ScalarsnAgImgLoadSPModuleType | read-write | current | The switch processor module type of which that receives the downloaded image. |
| 1.3.6.1.4.1.1991.1.1.2.1.57 | ScalarsnAgImgLoadSPModuleNumber | read-write | current | The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules. |
| 1.3.6.1.4.1.1991.1.1.2.1.58 | ScalarsnAgTrapHoldTime | read-write | current | The time in seconds for which traps will be witheld during system initialization. |
| 1.3.6.1.4.1.1991.1.1.2.1.59 | ScalarsnAgSFlowSourceInterface | read-write | current | Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address configured on it. Value of 0 indi… |
| 1.3.6.1.4.1.1991.1.1.2.1.60 | ScalarsnAgGblTelnetLoginTimeout | read-write | current | Telnet session login timeout value in minutes. Default is 2 minutes. |
| 1.3.6.1.4.1.1991.1.1.2.1.61 | ScalarsnAgGblBannerExec | read-write | current | EXEC process creation banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.1991.1.1.2.1.62 | ScalarsnAgGblBannerIncoming | read-write | current | Incoming terminal line banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.1991.1.1.2.1.63 | ScalarsnAgGblBannerMotd | read-write | current | Message-of-the-day banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.1991.1.1.2.1.64 | ScalarsnAgWebMgmtServerTcpPort | read-write | current | The TCP port number of web management interface. |
| 1.3.6.1.4.1.1991.1.1.2.1.65 | ScalarsnAgTftpServerAddrType | read-write | current | TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2) |
| 1.3.6.1.4.1.1991.1.1.2.1.66 | ScalarsnAgTftpServerAddr | read-write | current | TFTP server IP address. |
| 1.3.6.1.4.1.1991.1.1.2.1.68 | ScalarsnAgGblPasswordCheckMode | read-only | current | enabled(1) - The password checking for SNMP set requests is enabled. The default value is enable. disabled(2) - The password checking for SNMP set requests is … |
| 1.3.6.1.4.1.1991.1.1.2.1.69 | ScalarsnAgGblEnableTelnetAuthentication | read-write | current | Enable or disable telnet authentication in device. |
| 1.3.6.1.4.1.1991.1.1.2.1.70 | ScalarsnAgGblManager2FactorAuthentication | read-write | current | enabled(1) - The manager two-factor authentication is enabled. Only revSSH access through SZ is allowed and all incoming SSH sessions to device are closed when… |
| 1.3.6.1.4.1.1991.1.1.2.1.71 | ScalarsnAgDefGwayIpv6 | read-only | current | The default ipv6 gateway (router) address. |
| 1.3.6.1.4.1.1991.1.1.2.1.72 | ScalarsnAgEraseConfig | read-write | current | Action object to erase start-up config from flash on the device. The following values can only be read: normal(1) error(2)... operation failed or bad flash era… |
| 1.3.6.1.4.1.1991.1.1.2.1.73 | ScalarsnAgSaveConfig | read-write | current | Action object to save all configuration info to flash on the device. The following values can only be read: normal(1) error(2)... operation failed or bad flash… |
| 1.3.6.1.4.1.1991.1.1.2.1.74 | ScalarsnAgGblFirmWareDownLoadState | read-only | current | The firmware download status represents the current state of a firmware download operation. |
| 1.3.6.1.4.1.1991.1.1.2.2 | NodesnAgentBrd | |||
| 1.3.6.1.4.1.1991.1.1.2.2.1 | TablesnAgentBrdTable | not-accessible | current | A table of each physical board information. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1 | RowsnAgentBrdEntry | not-accessible | current | A row in the Agent Board table. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.1 | ColumnsnAgentBrdIndex | read-only | current | The index to the Agent Interface Table. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.2 | ColumnsnAgentBrdMainBrdDescription | read-only | current | The main board description string. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.3 | ColumnsnAgentBrdMainBrdId | read-only | current | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.4 | ColumnsnAgentBrdMainPortTotal | read-only | current | The total number of ports for the main board. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.5 | ColumnsnAgentBrdExpBrdDescription | read-only | current | The expansion board description string. Expansion board are those boards attaching on the main board. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.6 | ColumnsnAgentBrdExpBrdId | read-only | current | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.7 | ColumnsnAgentBrdExpPortTotal | read-only | current | The total number of ports for the expansion board. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.8 | ColumnsnAgentBrdStatusLeds | read-only | deprecated | A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number … |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.9 | ColumnsnAgentBrdTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maxi… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.10 | ColumnsnAgentBrdMediaLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.11 | ColumnsnAgentBrdSpeedLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.12 | ColumnsnAgentBrdModuleStatus | read-only | current | By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. … |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.13 | ColumnsnAgentBrdRedundantStatus | read-only | current | The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.14 | ColumnsnAgentBrdAlarmLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each s… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.15 | ColumnsnAgentBrdTxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.16 | ColumnsnAgentBrdRxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit … |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.17 | ColumnsnAgentBrdStatusLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.18 | ColumnsnAgentBrdTrafficLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.19 | ColumnsnAgentBrdMediaLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.20 | ColumnsnAgentBrdSpeedLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.21 | ColumnsnAgentBrdAlarmLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.22 | ColumnsnAgentBrdTxTrafficLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.23 | ColumnsnAgentBrdRxTrafficLedString | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.24 | ColumnsnAgentBrdMemoryTotal | read-only | current | The total memory in bytes within this module. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.25 | ColumnsnAgentBrdMemoryAvailable | read-only | current | The total memory in bytes available for use within this module. |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.26 | ColumnsnAgentBrdSerialNumber | read-only | current | The Board Serial number. Zero length string indicates that module serial number has not been programmed within EEPROM or the module does not support serial num… |
| 1.3.6.1.4.1.1991.1.1.2.2.1.1.27 | ColumnsnAgentBrdPartNumber | read-only | current | The Board Part number. Zero length string indicates that module part number has not been programmed within EEPROM or the module does not support part number wi… |
| 1.3.6.1.4.1.1991.1.1.2.2.2 | TablesnAgentBrd2Table | not-accessible | current | A table of each physical board information for each unit. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1 | RowsnAgentBrd2Entry | not-accessible | current | A row in the Agent Board table. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.1 | ColumnsnAgentBrd2Unit | read-only | current | The index to the Agent module Table. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.2 | ColumnsnAgentBrd2Slot | read-only | current | The index to the Agent module Table. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.3 | ColumnsnAgentBrd2MainBrdDescription | read-only | current | The main board description string. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.4 | ColumnsnAgentBrd2MainBrdId | read-only | current | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.5 | ColumnsnAgentBrd2MainPortTotal | read-only | current | The total number of ports for the main board. |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.6 | ColumnsnAgentBrd2ModuleStatus | read-only | current | By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. … |
| 1.3.6.1.4.1.1991.1.1.2.2.2.1.7 | ColumnsnAgentBrd2RedundantStatus | read-only | current | The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. |
| 1.3.6.1.4.1.1991.1.1.2.3 | NodesnAgentTrp | |||
| 1.3.6.1.4.1.1991.1.1.2.3.1 | TablesnAgTrpRcvrTable | not-accessible | deprecated | A table of managers which to send traps. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1 | RowsnAgTrpRcvrEntry | not-accessible | deprecated | A row in the trap receiver table. The column snAgTrpRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects snAgTrp… |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.1 | ColumnsnAgTrpRcvrIndex | read-only | deprecated | The index to the Trap Receiver Table. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.2 | ColumnsnAgTrpRcvrIpAddr | read-write | deprecated | The ip address for SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.3 | ColumnsnAgTrpRcvrCommunityOrSecurityName | read-write | deprecated | Community string to use. In case of USM (SNMPv3) security model, this object is used to provide the security name. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.4 | ColumnsnAgTrpRcvrStatus | read-write | deprecated | This object is used to create and delete rows in the table and control if they are used. The values that can be written are: ignore(5)...don't use this entry t… |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.5 | ColumnsnAgTrpRcvrUDPPort | read-write | deprecated | UDP port number of the trap receiver. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.6 | ColumnsnAgTrpRcvrSecurityModel | read-write | deprecated | Version of trap format to be used. |
| 1.3.6.1.4.1.1991.1.1.2.3.1.1.7 | ColumnsnAgTrpRcvrSecurityLevel | read-write | deprecated | Used for USM (SNMPv3) security model to specify the level of security. The security name is provided by snAgTrpRcvrCommunityOrSecurityName. |
| 1.3.6.1.4.1.1991.1.1.2.4 | NodesnAgentBoot | |||
| 1.3.6.1.4.1.1991.1.1.2.4.1 | TablesnAgBootSeqTable | not-accessible | current | A table of image load sequnce instructions to the boot code. Boot code will start from instruction of the first valid entry to load the image. If failed, it wi… |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1 | RowsnAgBootSeqEntry | not-accessible | current | A row in the boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.1 | ColumnsnAgBootSeqIndex | read-only | current | The index to the boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.2 | ColumnsnAgBootSeqInstruction | read-write | current | The instruction for the boot code. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.3 | ColumnsnAgBootSeqIpAddr | read-write | current | The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.4 | ColumnsnAgBootSeqFilename | read-write | current | The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.1.1.5 | ColumnsnAgBootSeqRowStatus | read-write | current | To create or delete a boot sequence table entry. |
| 1.3.6.1.4.1.1991.1.1.2.4.2 | TablesnAgSpBootSeqTable | not-accessible | current | A table of image load sequnce instructions to the boot code for the slave (line) modules. Boot code will start from instruction of the first valid entry to loa… |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1 | RowsnAgSpBootSeqEntry | not-accessible | current | A row in the slave module boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.1 | ColumnsnAgSpBootSeqSpNumber | not-accessible | current | The slot numner of a slave/witch processor module for which this boot sequence applies. Setting value 0 applies to all SP modules. Index 0 is valid only for se… |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.2 | ColumnsnAgSpBootSeqIndex | not-accessible | current | The index to the boot sequence table. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.3 | ColumnsnAgSpBootSeqInstruction | read-write | current | The instruction for the boot code. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.4 | ColumnsnAgSpBootSeqIpAddr | read-write | current | The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.5 | ColumnsnAgSpBootSeqFilename | read-write | current | The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.1991.1.1.2.4.2.1.6 | ColumnsnAgSpBootSeqRowStatus | read-write | current | To create or delete a boot sequence table entry. |
| 1.3.6.1.4.1.1991.1.1.2.5 | NodesnAgCfgEos | |||
| 1.3.6.1.4.1.1991.1.1.2.5.1 | TablesnAgCfgEosTable | not-accessible | deprecated | This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET represents configuration file … |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1 | RowsnAgCfgEosEntry | not-accessible | deprecated | An EOS row in the table of encoded octet strings for table snAgCfgEosTable. |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1.1 | ColumnsnAgCfgEosIndex | read-only | deprecated | Each VLAN EOS Buffer Identifier have a multiple VLAN table entries. |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1.2 | ColumnsnAgCfgEosPacket | read-write | deprecated | An encoded octet string. On reads it contains an integral number of configuration file data packets. The size of each encoded octet string is less than or equa… |
| 1.3.6.1.4.1.1991.1.1.2.5.1.1.3 | ColumnsnAgCfgEosChkSum | read-write | deprecated | A checksum of each configuration file data packet. |
| 1.3.6.1.4.1.1991.1.1.2.6 | NodesnAgentLog | |||
| 1.3.6.1.4.1.1991.1.1.2.6.1 | NodesnAgSysLogGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.6.1.1 | ScalarsnAgSysLogGblEnable | read-write | current | Enable/disable system logging. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.2 | ScalarsnAgSysLogGblBufferSize | read-write | current | The number of dynamic system logging entries. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.3 | ScalarsnAgSysLogGblClear | read-write | current | Clear dynamic and/or static system logging buffers. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.4 | ScalarsnAgSysLogGblCriticalLevel | read-write | current | Filter events going to the logging buffer. This is a packed bit string object of which each bit has the following meaning: (bit 0 is the least significant bit)… |
| 1.3.6.1.4.1.1991.1.1.2.6.1.5 | ScalarsnAgSysLogGblLoggedCount | read-only | current | The number events logged in the system logging buffer. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.6 | ScalarsnAgSysLogGblDroppedCount | read-only | current | The number of events dropped. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.7 | ScalarsnAgSysLogGblFlushedCount | read-only | current | The number of times that the system logging buffer was cleared. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.8 | ScalarsnAgSysLogGblOverrunCount | read-only | current | The number of times that the system logging buffer was wrapped around. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.9 | ScalarsnAgSysLogGblServer | read-write | deprecated | IP address of syslog server. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.10 | ScalarsnAgSysLogGblFacility | read-write | current | Facility code. |
| 1.3.6.1.4.1.1991.1.1.2.6.1.11 | ScalarsnAgSysLogGblPersistenceEnable | read-write | current | Enable/disable system logging persistence. |
| 1.3.6.1.4.1.1991.1.1.2.6.2 | TablesnAgSysLogBufferTable | not-accessible | current | Dynamic system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1 | RowsnAgSysLogBufferEntry | not-accessible | current | A row in the dynamic system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.1 | ColumnsnAgSysLogBufferIndex | read-only | current | The index to the dynamic system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.2 | ColumnsnAgSysLogBufferTimeStamp | read-only | current | A time stamp when the event is logged. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.3 | ColumnsnAgSysLogBufferCriticalLevel | read-only | current | The critical level of this event. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.4 | ColumnsnAgSysLogBufferMessage | read-only | current | The system logging message. |
| 1.3.6.1.4.1.1991.1.1.2.6.2.1.5 | ColumnsnAgSysLogBufferCalTimeStamp | read-only | current | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.1991.1.1.2.6.3 | TablesnAgStaticSysLogBufferTable | not-accessible | current | Static system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1 | RowsnAgStaticSysLogBufferEntry | not-accessible | current | A row in the static system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.1 | ColumnsnAgStaticSysLogBufferIndex | read-only | current | The index to the static system logging buffer table. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.2 | ColumnsnAgStaticSysLogBufferTimeStamp | read-only | current | A time stamp when the event is logged. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.3 | ColumnsnAgStaticSysLogBufferCriticalLevel | read-only | current | The critical level of this event. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.4 | ColumnsnAgStaticSysLogBufferMessage | read-only | current | The system logging message. |
| 1.3.6.1.4.1.1991.1.1.2.6.3.1.5 | ColumnsnAgStaticSysLogBufferCalTimeStamp | read-only | current | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.1991.1.1.2.6.4 | TablesnAgSysLogServerTable | not-accessible | current | System Log Server table. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1 | RowsnAgSysLogServerEntry | not-accessible | current | A row in the SysLog Server table. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1.1 | ColumnsnAgSysLogServerIP | read-only | current | IP address of syslog server. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1.2 | ColumnsnAgSysLogServerUDPPort | read-only | current | UDP port number of syslog server. |
| 1.3.6.1.4.1.1991.1.1.2.6.4.1.3 | ColumnsnAgSysLogServerRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.2.7 | NodesnAgentSysParaConfig | |||
| 1.3.6.1.4.1.1991.1.1.2.7.1 | TablesnAgentSysParaConfigTable | not-accessible | current | A table of Agent of each board. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1 | RowsnAgentSysParaConfigEntry | not-accessible | current | A row in the Agent System Parameters Configuation table. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.1 | ColumnsnAgentSysParaConfigIndex | read-only | current | The index to the Agent System Parameters Configuation Table. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.2 | ColumnsnAgentSysParaConfigDescription | read-only | current | The main board description string. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.3 | ColumnsnAgentSysParaConfigMin | read-only | current | The minimum value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.4 | ColumnsnAgentSysParaConfigMax | read-only | current | The maximum value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.5 | ColumnsnAgentSysParaConfigDefault | read-only | current | The default value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.7.1.1.6 | ColumnsnAgentSysParaConfigCurrent | read-write | current | The current configurated value of this Agent System Parameter. |
| 1.3.6.1.4.1.1991.1.1.2.8 | NodesnAgentConfigModule | |||
| 1.3.6.1.4.1.1991.1.1.2.8.1 | TablesnAgentConfigModuleTable | not-accessible | current | A table of each configured module information. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1 | RowsnAgentConfigModuleEntry | not-accessible | current | A row in the Agent Configured Module table. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.1 | ColumnsnAgentConfigModuleIndex | read-only | current | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.2 | ColumnsnAgentConfigModuleType | read-write | current | The Configured Module Type. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.3 | ColumnsnAgentConfigModuleRowStatus | read-write | current | To create or delete a configured module table entry. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.4 | ColumnsnAgentConfigModuleDescription | read-only | current | A description of the configured module. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.5 | ColumnsnAgentConfigModuleOperStatus | read-only | current | Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.6 | ColumnsnAgentConfigModuleSerialNumber | read-only | current | Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.7 | ColumnsnAgentConfigModuleNumberOfPorts | read-only | current | The number of ports of module. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.8 | ColumnsnAgentConfigModuleMgmtModuleType | read-only | current | Management module type. |
| 1.3.6.1.4.1.1991.1.1.2.8.1.1.9 | ColumnsnAgentConfigModuleNumberOfCpus | read-only | current | The number of module CPUs. |
| 1.3.6.1.4.1.1991.1.1.2.8.2 | TablesnAgentConfigModule2Table | not-accessible | current | A table of each configured stacking module information. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1 | RowsnAgentConfigModule2Entry | not-accessible | current | A row in the Agent Configured Stacking Module table. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.1 | ColumnsnAgentConfigModule2Unit | read-only | current | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.2 | ColumnsnAgentConfigModule2Slot | read-only | current | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.3 | ColumnsnAgentConfigModule2Type | read-write | current | The Configured Module Type. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.4 | ColumnsnAgentConfigModule2RowStatus | read-write | current | To create or delete a configured module table entry. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.5 | ColumnsnAgentConfigModule2Description | read-only | current | A description of the configured module. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.6 | ColumnsnAgentConfigModule2OperStatus | read-only | current | Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.7 | ColumnsnAgentConfigModule2SerialNumber | read-only | current | Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.8 | ColumnsnAgentConfigModule2NumberOfPorts | read-only | current | The number of ports of module. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.9 | ColumnsnAgentConfigModule2MgmtModuleType | read-only | current | Management module type. |
| 1.3.6.1.4.1.1991.1.1.2.8.2.1.10 | ColumnsnAgentConfigModule2NumberOfCpus | read-only | current | The number of module CPUs. |
| 1.3.6.1.4.1.1991.1.1.2.9 | NodesnAgentUser | |||
| 1.3.6.1.4.1.1991.1.1.2.9.1 | NodesnAgentUserGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.9.1.1 | ScalarsnAgentUserMaxAccnt | read-only | current | Maximum number of user account entries can be configured. |
| 1.3.6.1.4.1.1991.1.1.2.9.2 | TablesnAgentUserAccntTable | not-accessible | current | A table of user account information. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1 | RowsnAgentUserAccntEntry | not-accessible | current | A row in the Agent User table. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.1 | ColumnsnAgentUserAccntName | read-only | current | The user name. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.2 | ColumnsnAgentUserAccntPassword | read-write | current | The user password. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.3 | ColumnsnAgentUserAccntEncryptCode | read-write | current | The password encryption method code. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.4 | ColumnsnAgentUserAccntPrivilege | read-write | current | The user privilege. |
| 1.3.6.1.4.1.1991.1.1.2.9.2.1.5 | ColumnsnAgentUserAccntRowStatus | read-write | current | To create or delete a user account table entry. |
| 1.3.6.1.4.1.1991.1.1.2.10 | NodesnAgentRedundant | |||
| 1.3.6.1.4.1.1991.1.1.2.10.1 | NodesnAgentRedunGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.10.1.1 | ScalarsnAgentRedunActiveMgmtMod | read-write | current | Slot number of the active management module. Setting this object does not take effect immediately. Saving configuration data to flash storage and reboot the sy… |
| 1.3.6.1.4.1.1991.1.1.2.10.1.2 | ScalarsnAgentRedunSyncConfig | read-write | current | Frequency of the backup management module copying the configuration data from the active management module. Each unit is 1 second. Setting a value 0 will disab… |
| 1.3.6.1.4.1.1991.1.1.2.10.1.3 | ScalarsnAgentRedunBkupCopyBootCode | read-write | current | If enabled(1), the backup management module copies the boot code from the active management module to its boot code flash storage after power up, and whenever … |
| 1.3.6.1.4.1.1991.1.1.2.10.1.4 | ScalarsnAgentEnableMgmtModRedunStateChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate management module redundancy state change traps. |
| 1.3.6.1.4.1.1991.1.1.2.10.1.5 | ScalarsnAgentRedunBkupBootLoad | read-write | current | Action object to down load a new boot code from boot flash storage of the active management module to the backup management module. The following are returned … |
| 1.3.6.1.4.1.1991.1.1.2.10.1.6 | ScalarsnAgentRedunSwitchOver | read-write | current | To force a switch-over from standby to active state if the backup management module exists in a chassis. |
| 1.3.6.1.4.1.1991.1.1.2.11 | NodesnAgentCpu | |||
| 1.3.6.1.4.1.1991.1.1.2.11.1 | TablesnAgentCpuUtilTable | not-accessible | current | Table to list utilization for all CPUs in the device. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1 | RowsnAgentCpuUtilEntry | not-accessible | current | A row in the CPU utilization table. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.1 | ColumnsnAgentCpuUtilSlotNum | read-only | current | The slot number of module which contains the cpu. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.2 | ColumnsnAgentCpuUtilCpuId | read-only | current | The id of cpu. For non-VM1/WSM management module, there is one CPU. For VM1/WSM there's one management CPU and three slave CPUs. The management CPU could be tu… |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.3 | ColumnsnAgentCpuUtilInterval | read-only | current | The value, in seconds, for this utilization. For both management and slave CPU, we display utilization for 1 sec, 5 sec, 60 sec and 300 sec interval. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.4 | ColumnsnAgentCpuUtilValue | read-only | deprecated | The statistical CPU utilization in units of one-hundredth of a percent. This value is deprecated. Users are recommended to use snAgentCpuUtilPercent or snAgent… |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.5 | ColumnsnAgentCpuUtilPercent | read-only | current | The statistical CPU utilization in units of a percent. |
| 1.3.6.1.4.1.1991.1.1.2.11.1.1.6 | ColumnsnAgentCpuUtil100thPercent | read-only | current | The statistical CPU utilization in units of one-hundredth of a percent. |
| 1.3.6.1.4.1.1991.1.1.2.11.2 | TablesnCpuProcessTable | not-accessible | current | Table to list utilization and runtime for all CPU processes in the device. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1 | RowsnCpuProcessEntry | not-accessible | current | A row in the CPU process table. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.1 | ColumnsnCpuProcessName | read-only | current | The process name. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.2 | ColumnsnCpuProcess5SecUtil | read-only | current | The statistics collection of last 5 second process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.3 | ColumnsnCpuProcess1MinUtil | read-only | current | The statistics collection of last 1 minute process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.4 | ColumnsnCpuProcess5MinUtil | read-only | current | The statistics collection of last 5 minute process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.5 | ColumnsnCpuProcess15MinUtil | read-only | current | The statistics collection of last 15 minute process utilization. |
| 1.3.6.1.4.1.1991.1.1.2.11.2.1.6 | ColumnsnCpuProcessRuntime | read-only | current | Process runtime in milliseconds. |
| 1.3.6.1.4.1.1991.1.1.2.12 | NodesnAgentHw | |||
| 1.3.6.1.4.1.1991.1.1.2.12.1 | TablesnAgentHwICBMCounterTable | not-accessible | current | Table to list the ICBM counter values. This table is not supported on 10G module. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1 | RowsnAgentHwICBMCounterEntry | not-accessible | current | A row representing ICBM counter values for that slot. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.1 | ColumnsnAgentHwICBMCounterSlot | read-only | current | Slot number where ICBM resides. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.2 | ColumnsnAgentHwICBMCounterDMA | read-only | current | DMA Id within a slot where ICBM resides. Valid only for Jetcore modules. For non-Jetcore modules, this index is ignored by the agent. In this case, value 0 wil… |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.3 | ColumnsnAgentHwICBMCounterFreeDepth | read-only | current | Current depth of the free queue for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.4 | ColumnsnAgentHwICBMCounterWriteDrop | read-only | current | Write sequencer drop count for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.5 | ColumnsnAgentHwICBMCounterWriteInput | read-only | current | Write sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.6 | ColumnsnAgentHwICBMCounterWriteOutput | read-only | current | Write sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.7 | ColumnsnAgentHwICBMCounterReadInput | read-only | current | Read sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.1.1.8 | ColumnsnAgentHwICBMCounterReadOutput | read-only | current | Read sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.1991.1.1.2.12.2 | TablesnCAMIpStatTable | not-accessible | current | Table to list the IP CAM statistics. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1 | RowsnCAMIpStatEntry | not-accessible | current | A row representing IP CAM statistics for a given interface and level. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.1 | ColumnsnCAMIpStatIfIndex | read-only | current | ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.2 | ColumnsnCAMIpStatLevel | read-only | current | Level of CAM entry for that interface. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.3 | ColumnsnCAMIpStatFreeEntries | read-only | current | Free entries in the IP CAM for that interface and level. |
| 1.3.6.1.4.1.1991.1.1.2.12.2.1.4 | ColumnsnCAMIpStatTotalEntries | read-only | current | Total entries in the IP CAM for that interface and level. |
| 1.3.6.1.4.1.1991.1.1.2.12.3 | TablesnCAMStatTable | not-accessible | current | Table to list the CAM statistics. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1 | RowsnCAMStatEntry | not-accessible | current | A row representing CAM statistics for a given DMA Id number. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.1 | ColumnsnCamStatDMAIdNumber | read-only | current | DMA Id number. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.2 | ColumnsnCamStatDMAMasterNumber | read-only | current | DMA Master for that DMA Id. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.3 | ColumnsnCamStatFreePool0Entries | read-only | current | CAM free pool0 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.4 | ColumnsnCamStatFreePool1Entries | read-only | current | CAM free pool1 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.5 | ColumnsnCamStatFreePool2Entries | read-only | current | CAM free pool2 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.6 | ColumnsnCamStatFreePool3Entries | read-only | current | CAM free pool3 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.7 | ColumnsnCamStatFreeL2Entries | read-only | current | CAM Free L2 entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.8 | ColumnsnCamStatFreeL2LowestSection | read-only | current | CAM Free L2 lowest section entries. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.9 | ColumnsnCamStatHostLookupCount | read-only | current | CAM host lookup count for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.10 | ColumnsnCamStatRouteLookupCount | read-only | current | CAM route lookup count for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.11 | ColumnsnCamStatLevel1 | read-only | current | CAM stat level1 entries for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.12 | ColumnsnCamStatLevel2 | read-only | current | CAM stat level2 entries for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.13 | ColumnsnCamStatLevel3 | read-only | current | CAM stat level3 entries for router. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.14 | ColumnsnCamStatMacFailCount | read-only | current | CAM MAC fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.15 | ColumnsnCamStatIPRouteFailCount | read-only | current | CAM IP route fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.16 | ColumnsnCamStatIPSessionFailCount | read-only | current | CAM IP session fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.17 | ColumnsnCamStatIPMCastFailCount | read-only | current | CAM IP multicast fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.18 | ColumnsnCamStatL2SessionFailCount | read-only | current | CAM L2 session fail count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.19 | ColumnsnCamStatAddMACCount | read-only | current | CAM add MAC count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.20 | ColumnsnCamStatAddVLANCount | read-only | current | CAM add VLAN count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.21 | ColumnsnCamStatAddIPHostCount | read-only | current | CAM add IP host count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.22 | ColumnsnCamStatAddIPRouteCount | read-only | current | CAM add IP route count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.23 | ColumnsnCamStatAddIPSessionCount | read-only | current | CAM add IP session count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.24 | ColumnsnCamStatAddIPMCastCount | read-only | current | CAM add IP multicast count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.25 | ColumnsnCamStatAddL2SessionCount | read-only | current | CAM add L2 session count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.26 | ColumnsnCamStatAddIPXCount | read-only | current | CAM add IPX count. |
| 1.3.6.1.4.1.1991.1.1.2.12.3.1.27 | ColumnsnCamStatDeleteDMACamCount | read-only | current | CAM delete DMA CAM count. |
| 1.3.6.1.4.1.1991.1.1.2.12.4 | NodesnAgSystemDRAM | |||
| 1.3.6.1.4.1.1991.1.1.2.12.4.1 | ScalarsnAgSystemDRAMUtil | read-only | current | The system dynamic memory utilization, in unit of percentage. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.2 | ScalarsnAgSystemDRAMTotal | read-only | current | The total amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.3 | ScalarsnAgSystemDRAMFree | read-only | current | The free amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.4 | ScalarsnAgSystemDRAMForBGP | read-only | current | The free amount of system dynamic memory used by BGP, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.4.5 | ScalarsnAgSystemDRAMForOSPF | read-only | current | The free amount of system dynamic memory used by OSPF, in number of bytes. |
| 1.3.6.1.4.1.1991.1.1.2.12.5 | NodesnAgSystemDebug | |||
| 1.3.6.1.4.1.1991.1.1.2.12.5.1 | ScalarsnAgSystemDebugTotalIn | read-only | current | Total incoming packet count. Sum of Buffer Manager and CPU read count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.2 | ScalarsnAgSystemDebugTotalOut | read-only | current | Total outgoing packet count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.3 | ScalarsnAgSystemDebugCpuQueueRead | read-only | current | CPU Queue read count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.4 | ScalarsnAgSystemDebugDRAMBuffer | read-only | current | DRAM buffer count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.5 | ScalarsnAgSystemDebugBMBuffer | read-only | current | BM buffer count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.6 | ScalarsnAgSystemDebugBMFreeBuffer | read-only | current | BM free buffer count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.7 | ScalarsnAgSystemDebugBMFreeBufferMgmt | read-only | current | BM free buffer management count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.8 | ScalarsnAgSystemDebugIpcGigLock | read-only | current | IPC GIG lock count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.9 | ScalarsnAgSystemDebugDRAMGetError | read-only | current | DRAM get error count. |
| 1.3.6.1.4.1.1991.1.1.2.12.5.10 | ScalarsnAgSystemDebugDRAMToBMCopyFail | read-only | current | DRAM to Buffer Manager copy fail count. |
| 1.3.6.1.4.1.1991.1.1.2.13 | NodesnAgentTemp | |||
| 1.3.6.1.4.1.1991.1.1.2.13.1 | TablesnAgentTempTable | not-accessible | current | Table to list temperatures of all the modules in the device. This table is applicable to only those modules with temperature sensors. This table is applicable … |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1 | RowsnAgentTempEntry | not-accessible | current | A row in the module temperature table. |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.1 | ColumnsnAgentTempSlotNum | not-accessible | current | The slot number of module which contains the temperature sensor represented by this row. |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.2 | ColumnsnAgentTempSensorId | not-accessible | current | The temperature sensor identifier of Slave module whose temperature is represented by this row, for management module: sensor#1 - Intake Side Temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.3 | ColumnsnAgentTempSensorDescr | read-only | current | Describes the temperature sensor in a human readable form. This is the same as snAgentTempSensorId, which is numeric and used to traverse the temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.1.1.4 | ColumnsnAgentTempValue | read-only | current | Temperature of the the sensor represented by this row. Each unit is 0.5 degrees Celcius. |
| 1.3.6.1.4.1.1991.1.1.2.13.2 | TablesnAgentTempThresholdTable | not-accessible | current | Table to list temperature threshold levels for 4 speeds of fan settings. Depending on the temperature level, the fans run at diffrent speeds of RPM. There are … |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1 | RowsnAgentTempThresholdEntry | not-accessible | current | A row in the module temperature threshold table. |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.1 | ColumnsnAgentTempThresholdModule | not-accessible | current | The module in the system for which threshold levels represented by this row are applicable. |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.2 | ColumnsnAgentTempThresholdLevel | not-accessible | current | The temperature threshold level of the module for which threshold levels represented by this row are applicable. |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.3 | ColumnsnAgentTempThresholdHighValue | read-write | current | The high value for the temperature threshold, above which the fans would need to operate at the next higher speed. If it reaches more than the high threshold v… |
| 1.3.6.1.4.1.1991.1.1.2.13.2.1.4 | ColumnsnAgentTempThresholdLowValue | read-write | current | The low value for the temperature threshold, below which the fans would need to operate at the next lower speed. This value is not applicable for the 'low' lev… |
| 1.3.6.1.4.1.1991.1.1.2.13.3 | TablesnAgentTemp2Table | not-accessible | current | Table to list temperatures of the modules in the device for each unit. This table is applicable to only those modules with temperature sensors. This table is a… |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1 | RowsnAgentTemp2Entry | not-accessible | current | A row in the module temperature table. |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.1 | ColumnsnAgentTemp2UnitNum | not-accessible | current | The unit number of module which contains the temperature sensor represented by this row. |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.2 | ColumnsnAgentTemp2SlotNum | not-accessible | current | The slot number of module which contains the temperature sensor represented by this row. |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.3 | ColumnsnAgentTemp2SensorId | not-accessible | current | The temperature sensor identifier of Slave module whose temperature is represented by this row, for management module: sensor#1 - Intake Side Temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.4 | ColumnsnAgentTemp2SensorDescr | read-only | current | Describes the temperature sensor in a human readable form. This is the same as snAgentTempSensorId, which is numeric and used to traverse the temperature senso… |
| 1.3.6.1.4.1.1991.1.1.2.13.3.1.5 | ColumnsnAgentTemp2Value | read-only | current | Temperature of the sensor represented by this row. Each unit is 0.5 degrees Celsius. |
| 1.3.6.1.4.1.1991.1.1.2.13.4 | TablesnAgentTempThreshold2Table | not-accessible | current | Table to list temperature threshold levels for 3 speeds of fan settings, threshold and warning temperature . Depending on the temperature level, the fans run a… |
| 1.3.6.1.4.1.1991.1.1.2.13.4.1 | RowsnAgentTempThreshold2Entry | not-accessible | current | A row in the module temperature threshold table. |
| 1.3.6.1.4.1.1991.1.1.2.13.4.1.1 | ColumnsnAgentTempThreshold2UnitNum | not-accessible | current | The unit number in the system for which threshold levels represented by this row are applicable. |
| 1.3.6.1.4.1.1991.1.1.2.13.4.1.2 | ColumnsnAgentTempThreshold2Rule | not-accessible | current | The Rule number in the system for which threshold levels represented by this row are applicable. |
| 1.3.6.1.4.1.1991.1.1.2.13.4.1.3 | ColumnsnAgentTempThreshold2LowValue | read-only | current | The low value for the temperature threshold, below which the fans would need to operate at the next lower speed. Each unit is degrees Celcius. This value is no… |
| 1.3.6.1.4.1.1991.1.1.2.13.4.1.4 | ColumnsnAgentTempThreshold2HighValue | read-only | current | The high value for the temperature threshold, above which the fans would need to operate at the next higher speed. If it reaches more than the high threshold v… |
| 1.3.6.1.4.1.1991.1.1.2.13.4.1.5 | ColumnsnAgentTempThreshold2ShutdownValue | read-only | current | Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is degrees Celcius. Only … |
| 1.3.6.1.4.1.1991.1.1.2.14 | IdentitysnAgentPoe | The Ruckus Wireless proprietary MIB module for Power Over Ethernet(PoE) It has PoE port and module configuring information. Copyright 1996-2017 Ruckus Wireless… | ||
| 1.3.6.1.4.1.1991.1.1.2.14.1 | NodesnAgentPoeGbl | |||
| 1.3.6.1.4.1.1991.1.1.2.14.1.1 | ScalarsnAgentPoeGblPowerCapacityTotal | read-only | current | This object shows the total inline power capacity available in the device, measured in mWatts. |
| 1.3.6.1.4.1.1991.1.1.2.14.1.2 | ScalarsnAgentPoeGblPowerCapacityFree | read-only | current | This object shows the inline power capacity currently available in the device which is unallocated, measured in mWatts. |
| 1.3.6.1.4.1.1991.1.1.2.14.1.3 | ScalarsnAgentPoeGblPowerAllocationsRequestsHonored | read-only | current | This object shows number of times the inline power allocations requests honored. |
| 1.3.6.1.4.1.1991.1.1.2.14.2 | NodesnAgentPoePort | |||
| 1.3.6.1.4.1.1991.1.1.2.14.2.2 | TablesnAgentPoePortTable | not-accessible | current | A table of POE port information. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1 | RowsnAgentPoePortEntry | not-accessible | current | A row in the POE port table. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.1 | ColumnsnAgentPoePortNumber | read-only | current | The port number in ifIndex value. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.2 | ColumnsnAgentPoePortControl | read-create | current | Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.3 | ColumnsnAgentPoePortWattage | read-create | current | Adjust the inline power wattage. Valid value between 1000 to 15400(IEEE802_3AF)/30000(IEEE802_3AT)/120000(IEEE802_3BT). Each unit is milliwatts. This object ca… |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.4 | ColumnsnAgentPoePortClass | read-create | current | Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after snSwIfInLinePowerControl has been set … |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.5 | ColumnsnAgentPoePortPriority | read-create | current | Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.6 | ColumnsnAgentPoePortConsumed | read-only | current | Inline power consumed by the port. Each unit is milliwatts. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.7 | ColumnsnAgentPoePortType | read-only | current | Inline Power device type 802.3af, 802.3at, 802.3bt or Legacy device. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.8 | ColumnsnAgentPoePortPDClass | read-only | current | This is a PD signature which the decive learns in the process of PD-classification. PD detection and PD-classification are two steps of powering PD. And if PD … |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.9 | ColumnsnAgentPoePortPDClassB | read-only | current | This is second PD class signature of dual signature PD which the device learns in the process of PD-classification. PD detection and PD-classification are two … |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.10 | ColumnsnAgentPoePortlldpReqPwr | read-only | current | Maximum power requested by PD through LLDP in milliwatts. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.11 | ColumnsnAgentPoePortlldpReqPwrA | read-only | deprecated | Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel snAgentPoePortlldpReqPwrA is power in milliwatts for c… |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.12 | ColumnsnAgentPoePortlldpReqPwrB | read-only | deprecated | Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel snAgentPoePortlldpReqPwrB is power in milliwatts for c… |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.13 | ColumnsnAgentPoePortCapability | read-only | current | Capability of port, 0-others, 1-2pair, 2-4pair. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.14 | ColumnsnAgentPoePortMax2PairPwr | read-only | current | Maximum power supported by 2pair port in milliwatts. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.15 | ColumnsnAgentPoePortMax4PairPwr | read-only | current | Maximum power supported by 4pair port in milliwatts. |
| 1.3.6.1.4.1.1991.1.1.2.14.2.2.1.16 | ColumnsnAgentPoePortMode | read-only | current | Poe port overdrive mode. |
| 1.3.6.1.4.1.1991.1.1.2.14.3 | NodesnAgentPoeModule | |||
| 1.3.6.1.4.1.1991.1.1.2.14.3.1 | TablesnAgentPoeModuleTable | not-accessible | current | A table of POE Module configuration. |
| 1.3.6.1.4.1.1991.1.1.2.14.3.1.1 | RowsnAgentPoeModuleEntry | not-accessible | current | A row in the POE Module table. |
| 1.3.6.1.4.1.1991.1.1.2.14.3.1.1.1 | ColumnsnAgentPoeModuleNumber | read-only | current | This objects talks about POE module number. |
| 1.3.6.1.4.1.1991.1.1.2.14.3.1.1.2 | ColumnsnAgentPoeModuleBudget | read-create | current | This objects talks about module power budget in watts. |
| 1.3.6.1.4.1.1991.1.1.2.14.3.1.1.3 | ColumnsnAgentPoeModuleMaxPDTypeSupport | read-only | current | This object talks about the POE module type which is capable to support Power Device (PD) type ieee802.3af or ieee802.3at(also called POE plus)type. Module whi… |
| 1.3.6.1.4.1.1991.1.1.2.14.4 | NodesnAgentPoeUnit | |||
| 1.3.6.1.4.1.1991.1.1.2.14.4.1 | TablesnAgentPoeUnitTable | not-accessible | current | A table of POE informaion for each unit. Only the unit that has POE capability appears in a table row |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1 | RowsnAgentPoeUnitEntry | not-accessible | current | A row in the POE Unit table. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.1 | ColumnsnAgentPoeUnitIndex | read-only | current | The Index to POE unit Table. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.2 | ColumnsnAgentPoeUnitPowerCapacityTotal | read-only | current | This object shows the total inline power capacity available on that unit (device), measured in mWatts. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.3 | ColumnsnAgentPoeUnitPowerCapacityFree | read-only | current | This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts. In case of Static allocation to… |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.4 | ColumnsnAgentPoeUnitPowerAllocationsRequestsHonored | read-only | current | This object shows number of times the inline power allocations requests honored on that unit (device). |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.5 | ColumnsnAgentPoePwrAllocationType | read-only | current | This object shows the power allocation type, based on which the total free capacity is displayed. Static(1) or Dynamic(2) power allocation. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.6 | ColumnsnAgentPoeFwVersion | read-only | current | This object shows the poe-fw version running on the system. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.7 | ColumnsnAgentPoeFwUpgradeStatus | read-only | current | This object shows the manual and auto fw upgrade status. Inactive(0) if upgrade is not in progress, Active(1) if upgrade is in progress. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.8 | ColumnsnAgentPoeHwVersion | read-only | current | This object shows the poe hw version. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.9 | ColumnsnAgentMaxDeviceTemp | read-only | current | The object disaplys the maximum poe device temperature. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.10 | ColumnsnAgentTotalAdminOnPorts | read-only | current | The object disaplys the total number of ports whose admin status in on. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.11 | ColumnsnAgentTotalAdminOffPorts | read-only | current | The object disaplys the total number of ports whose admin status in off. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.12 | ColumnsnAgentTotalOperOnPorts | read-only | current | The object disaplys the total number of ports whose operational status in on. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.13 | ColumnsnAgentTotalDeniedPorts | read-only | current | The object disaplys the total number of ports which are in denied state. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.14 | ColumnsnAgentTotalNoPdPorts | read-only | current | The object disaplys the total number of ports where PD is not connected. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.15 | ColumnsnAgentTotalFaultPorts | read-only | current | The object disaplys the total number of ports that are in faulty status. |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.16 | ColumnsnAgentTotalHighPriPorts | read-only | current | The object disaplys the total number of ports having priority set to high(1). |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.17 | ColumnsnAgentTotalMediumPriPorts | read-only | current | The object disaplys the total number of ports having priority set to medium(2). |
| 1.3.6.1.4.1.1991.1.1.2.14.4.1.1.18 | ColumnsnAgentTotalLowPriPorts | read-only | current | The object disaplys the total number of ports having priority set to low(3). |
| 1.3.6.1.4.1.1991.1.1.2.15 | NodesnAgentLicense | |||
| 1.3.6.1.4.1.1991.1.1.2.15.1 | TablefdryLicenseTable | not-accessible | deprecated | A list of licenses maintained by license sub-system. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1 | RowfdryLicenseEntry | not-accessible | deprecated | An entry in a license table. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.1 | ColumnfdryLicensePackageName | not-accessible | deprecated | Name of the package, whose license information, this entry displays. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.2 | ColumnfdryLicenseLid | not-accessible | deprecated | License Id (LID) of the license from the package. For the node locked license, this LID is same as LID of the device. For the non-node locked license, this LID… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.3 | ColumnfdryLicenseHash | not-accessible | deprecated | A unique hash for identifying a license entry in the system. This helps traverse through the entries with same package name and LID. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.4 | ColumnfdryLicenseType | read-only | deprecated | The type of the license, which can be either normal or trial. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.5 | ColumnfdryLicensePrecedence | read-only | deprecated | Defines the priority of a particular trial license among those having the same package and LID. This is primarily used for determining which license to use, wh… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.6 | ColumnfdryLicenseTrialDays | read-only | deprecated | The number of trial days for the license, if it's a trial license. Otherwise, the value has no meaning for normal licenses and read as 0 on Get operation. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.7 | ColumnfdryLicenseTrialTimeElapsed | read-only | deprecated | The cumulative number of hours used for this trial license. This counts all the usages of the trial license. For a normal license, this is 0. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.8 | ColumnfdryLicenseTrialTimeLeft | read-only | deprecated | The number of hours left for the trial license. This is derived from the total number of hours and the cumulative number of hours used. For a normal license, t… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.9 | ColumnfdryLicenseTrialState | read-only | deprecated | This indicates the state of the trial license. Invalid means the license is not valid for this box, unused means the license is never used, avtive means it has… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.10 | ColumnfdryLicenseVendorInfo | read-only | deprecated | This is the Ruckus Wireless specific package data which is an octet string. This contains encoded information of license specific information such as package b… |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.11 | ColumnfdryLicenseSlot | read-only | deprecated | This indicates the slot number of the module, the license belongs to. There is a one to one mapping between LID and slot number, as each module has unique LID … |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.12 | ColumnfdryLicenseMode | read-only | deprecated | The mode of the license, which can be either node locked or non-node locked mode. |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.13 | ColumnfdryLicenseSerialNumber | read-only | deprecated | This is the serial number of the license. This is only for the non-node locked license |
| 1.3.6.1.4.1.1991.1.1.2.15.1.1.14 | ColumnfdryLicenseCapacity | read-only | deprecated | The capacity of the license. For POD license, this is the number of ports. For premium or advance license, it is 1 |
| 1.3.6.1.4.1.1991.1.1.2.15.3 | TablebrcdPortLicenseTable | not-accessible | current | A list of ports which require the port license. |
| 1.3.6.1.4.1.1991.1.1.2.15.3.1 | RowbrcdPortLicenseEntry | not-accessible | current | An entry in a licensed port table. |
| 1.3.6.1.4.1.1991.1.1.2.15.3.1.1 | ColumnbrcdPortLicenseIndex | not-accessible | current | The port/interface index (ifindex). |
| 1.3.6.1.4.1.1991.1.1.2.15.3.1.2 | ColumnbrcdPortLicenseStatus | read-only | current | The current license state of the port. validLic(1) ............ the port requires port license, and has valid license noLic(2) ........... the port requires po… |
| 1.3.6.1.4.1.1991.1.1.2.15.4 | TablesnSAULicenseUnitTable | not-accessible | current | A list of SAU licenses maintained by each unit. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1 | RowsnSAULicenseUnitEntry | not-accessible | current | An entry in SAU license table. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.1 | ColumnsnSAULicenseUnitIndex | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.2 | ColumnsnSAULicensePackageName | read-only | current | Name of the license package. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.3 | ColumnsnSAUIsPremLicensePresent | read-only | current | The present state of L3 premium license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.4 | ColumnsnSAUIsPoDLicensePresent | read-only | current | The present state of PoD license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.5 | ColumnsnSAUPoDLicensedSpeed | read-only | current | The port speed of PoD license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.6 | ColumnsnSAUPoDLicensedPorts | read-only | current | The number of licensed ports. The capacity of PoD License. Zero means no PoD license or the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.7 | ColumnsnSAUIsMACSecLicensePresent | read-only | current | The present state of MACSec license. none means the license is not applicable to this device |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.8 | ColumnsnSAUPremSerialNumber | read-only | current | This is the serial number of CoE L3 premium license. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.9 | ColumnsnSAUPoDSerialNumber | read-only | current | This is the serial number of CoE PoD license. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.10 | ColumnsnSAUMACsecSerialNumber | read-only | current | This is the serial number of CoE MACsec license. |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.11 | ColumnsnSAUICX7150SerialNumber | read-only | deprecated | This is the serial number of CoE ICX7150 license. FOR ICX7150 platform, only one SAU license option can be installed. e.g. 4x10gr, It is combination of l3 prem… |
| 1.3.6.1.4.1.1991.1.1.2.15.4.1.12 | ColumnsnSAUICX8200SerialNumber | read-only | current | This is the serial number of CoE ICX8200 license. FOR ICX8200 platform, only one SAU license option can be installed. e.g. 4x25gr, It is combination of l3 prem… |
| 1.3.6.1.4.1.1991.1.1.3 | IdentitysnSwitch | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.1.3.1 | NodesnSwInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.1.1 | ScalarsnSwGroupOperMode | read-write | current | noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represents all switch ports with Basi… |
| 1.3.6.1.4.1.1991.1.1.3.1.2 | ScalarsnSwGroupIpL3SwMode | read-write | current | The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3… |
| 1.3.6.1.4.1.1991.1.1.3.1.3 | ScalarsnSwGroupIpMcastMode | read-write | current | The Switch Group is configured with the IP Multicast (IGMP snooping) mode either enabled (active or passive) or disabled and the default is disabled mode. disa… |
| 1.3.6.1.4.1.1991.1.1.3.1.4 | ScalarsnSwGroupDefaultCfgMode | read-write | current | The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will change to non-default. default(1).… |
| 1.3.6.1.4.1.1991.1.1.3.1.5 | ScalarsnSwGroupSwitchAgeTime | read-write | current | Sets the aging period for ports on the device, defining how long a port address remains active in the address table. Valid values: 0 = no aging, or 67 - 65535 … |
| 1.3.6.1.4.1.1991.1.1.3.1.6 | ScalarsnVLanGroupVlanCurEntry | read-only | current | The current total entry number of VLANs are configured. |
| 1.3.6.1.4.1.1991.1.1.3.1.7 | ScalarsnVLanGroupSetAllVLan | read-write | current | The value of this object is the VLanIndex of a particalur entry in snVLanByPortCfgTable (snVLanByPortCfgVLanId). All the attributes of that row of table except… |
| 1.3.6.1.4.1.1991.1.1.3.1.8 | ScalarsnSwPortSetAll | read-write | current | The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMod… |
| 1.3.6.1.4.1.1991.1.1.3.1.9 | ScalarsnFdbTableCurEntry | read-only | current | The current total entry number of FDB are configured. |
| 1.3.6.1.4.1.1991.1.1.3.1.10 | ScalarsnFdbTableStationFlush | read-write | current | The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in process The following value … |
| 1.3.6.1.4.1.1991.1.1.3.1.11 | ScalarsnPortStpSetAll | read-write | current | The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of… |
| 1.3.6.1.4.1.1991.1.1.3.1.12 | ScalarsnSwProbePortNum | read-write | current | A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8… |
| 1.3.6.1.4.1.1991.1.1.3.1.13 | ScalarsnSw8021qTagMode | read-write | current | The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IEEE… |
| 1.3.6.1.4.1.1991.1.1.3.1.14 | ScalarsnSwGlobalStpMode | read-write | current | Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spann… |
| 1.3.6.1.4.1.1991.1.1.3.1.15 | ScalarsnSwIpMcastQuerierMode | read-write | current | The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)...........when prunning traffic loca… |
| 1.3.6.1.4.1.1991.1.1.3.1.17 | ScalarsnSwViolatorPortNumber | read-only | current | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The bit 0 to bit 7: port number. … |
| 1.3.6.1.4.1.1991.1.1.3.1.18 | ScalarsnSwViolatorMacAddress | read-only | current | The source address of the violator packet received by the switch or router. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.19 | ScalarsnVLanGroupVlanMaxEntry | read-write | current | The maximum number of VLAN entries are allowed to configure. |
| 1.3.6.1.4.1.1991.1.1.3.1.20 | ScalarsnSwEosBufferSize | read-only | current | A specific buffer size for all the different EOS buffers. |
| 1.3.6.1.4.1.1991.1.1.3.1.21 | ScalarsnVLanByPortEntrySize | read-only | deprecated | The size of each VLAN table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.22 | ScalarsnSwPortEntrySize | read-only | current | The size of each port table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.23 | ScalarsnFdbStationEntrySize | read-only | current | The size of each Fdb station table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.24 | ScalarsnPortStpEntrySize | read-only | current | The size of each port stp table entry. |
| 1.3.6.1.4.1.1991.1.1.3.1.25 | ScalarsnSwEnableBridgeNewRootTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate bridge new root traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.26 | ScalarsnSwEnableBridgeTopoChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate bridge topology change traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.27 | ScalarsnSwEnableLockedAddrViolationTrap | read-write | deprecated | Indicates whether the SNMP agent process is permitted to generate locked address violation traps. |
| 1.3.6.1.4.1.1991.1.1.3.1.28 | ScalarsnSwIpxL3SwMode | read-write | current | The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer… |
| 1.3.6.1.4.1.1991.1.1.3.1.29 | ScalarsnVLanByIpSubnetMaxSubnets | read-only | current | The maximum number of subnets for each IP VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.30 | ScalarsnVLanByIpxNetMaxNetworks | read-only | current | The maximum number of networks for each IPX VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.31 | ScalarsnSwProtocolVLanMode | read-write | deprecated | disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). |
| 1.3.6.1.4.1.1991.1.1.3.1.32 | ScalarsnMacStationVLanId | read-write | deprecated | This VLAN ID controls filtering of the Forwarding Database table in the standard Bridge MIB (dot1dTpFdbTable). Since the dot1dTpFdbTable contains MAC addresses… |
| 1.3.6.1.4.1.1991.1.1.3.1.33 | ScalarsnSwClearCounters | read-write | current | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP … |
| 1.3.6.1.4.1.1991.1.1.3.1.34 | ScalarsnSw8021qTagType | read-write | current | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.1991.1.1.3.1.35 | ScalarsnSwBroadcastLimit | read-write | obsolete | Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of … |
| 1.3.6.1.4.1.1991.1.1.3.1.36 | ScalarsnSwMaxMacFilterPerSystem | read-only | current | The maximum number of MAC Filters per system in the MAC Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.37 | ScalarsnSwMaxMacFilterPerPort | read-only | current | The maximum number of MAC Filters per port in the Port MAC Access Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.1.38 | ScalarsnSwDefaultVLanId | read-write | current | The VLAN ID of the DEFAULT PORT-VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.1.39 | ScalarsnSwGlobalAutoNegotiate | read-write | current | This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotiation mode. If set to enable(1)… |
| 1.3.6.1.4.1.1991.1.1.3.1.40 | ScalarsnSwQosMechanism | read-write | current | Indicates whether the qos mechanism is strict or weighted. |
| 1.3.6.1.4.1.1991.1.1.3.1.41 | ScalarsnSwSingleStpMode | read-write | current | Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. disable(0)...........no Single Spa… |
| 1.3.6.1.4.1.1991.1.1.3.1.42 | ScalarsnSwFastStpMode | read-write | current | Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Sp… |
| 1.3.6.1.4.1.1991.1.1.3.1.43 | ScalarsnSwViolatorIfIndex | read-only | deprecated | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.1991.1.1.3.1.44 | ScalarsnSwSingleStpVLanId | read-only | current | The VLAN ID of the Single Spanning Tree VLAN if Single Spanning Tree was enabled. This object returns zero if Single Spanning Tree was disabled. |
| 1.3.6.1.4.1.1991.1.1.3.1.45 | ScalarsnSwJumboMode | read-write | current | The jumbo mode on the Switch can be set either enabled or disabled and the default is disabled mode. The jumbo frame (10200 bytes) can be supported if this mod… |
| 1.3.6.1.4.1.1991.1.1.3.1.46 | ScalarsnSwACLPerPortPerVlanMode | read-write | current | The ACL Per port per VLAN mode on the Switch can be set either enabled or disabled and the default is disabled mode. Allow the access list on selective ports o… |
| 1.3.6.1.4.1.1991.1.1.3.1.47 | ScalarsnSwIpMcastVersion | read-write | current | Multicast version at the globle level can be set 2 or 3, and the default is 2 |
| 1.3.6.1.4.1.1991.1.1.3.1.48 | ScalarsnSwMgmtVlan | read-only | current | VLAN can be a part of the management VLAN. It dedicates this VLAN for management purpose. The value 0 means that the management VLAN is not configurated, or is… |
| 1.3.6.1.4.1.1991.1.1.3.1.49 | ScalarsnSwErrDisableRecoveryTimeout | read-write | current | Configure the errdisable timeout value in second. Valid values: 0 = default value, or 10 - 65535 seconds Default: 300 seconds. |
| 1.3.6.1.4.1.1991.1.1.3.1.50 | ScalarsnSwErrDisableRecoveryCause | read-write | current | Configure the errdisable cause support recovery. Valid values: 0 = no recovery is supported, or other value, bit 0 - Enable auto-recovery from all causes bit 1… |
| 1.3.6.1.4.1.1991.1.1.3.1.51 | ScalarsnSwFwdProfileNumber | read-only | current | Tells us the current forwarding profile loaded on the ICX Unit. Only Applicable for 7850 and 7550 0 - Forwarding Profile Not Supported on Unit 1 - Forwarding P… |
| 1.3.6.1.4.1.1991.1.1.3.1.52 | ScalarsnSwErrDisableRecoveryCauseInt | read-only | current | Get the errdisable cause support recovery in Integer format. Valid values: 0 = no recovery is Enabled, bit 0(1) - auto-recovery from all causes is Enabled bit … |
| 1.3.6.1.4.1.1991.1.1.3.2 | NodesnVLanInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.2.1 | TablesnVLanByPortTable | not-accessible | deprecated | If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number o… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1 | RowsnVLanByPortEntry | not-accessible | deprecated | An entry in the VLAN By Port Information table. snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Globa… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.1 | ColumnsnVLanByPortVLanIndex | read-only | deprecated | The VLAN ID index must not be greater than the snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.2 | ColumnsnVLanByPortVLanId | read-only | deprecated | The VLAN ID index to the VLAN By Port Info Table. Each VLAN Identifier can have a membership of multiple ports. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.3 | ColumnsnVLanByPortPortMask | read-write | deprecated | The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.4 | ColumnsnVLanByPortQos | read-write | deprecated | The Stand alone stackable switch VLAN Priority values are: low(0) high(1) The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.5 | ColumnsnVLanByPortStpMode | read-write | deprecated | Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.6 | ColumnsnVLanByPortStpPriority | read-write | deprecated | dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of … |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.7 | ColumnsnVLanByPortStpGroupMaxAge | read-write | deprecated | dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifi… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.8 | ColumnsnVLanByPortStpGroupHelloTime | read-write | deprecated | dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.9 | ColumnsnVLanByPortStpGroupForwardDelay | read-write | deprecated | dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.10 | ColumnsnVLanByPortRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.11 | ColumnsnVLanByPortOperState | read-only | deprecated | By default, this mode is set to notActivated(0). notActivated(0)...the VLAN entry is not activated and not in running mode. activated(1)......the VLAN entry is… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.12 | ColumnsnVLanByPortBaseNumPorts | read-only | deprecated | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.13 | ColumnsnVLanByPortBaseType | read-only | deprecated | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.14 | ColumnsnVLanByPortStpProtocolSpecification | read-only | deprecated | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.15 | ColumnsnVLanByPortStpMaxAge | read-only | deprecated | dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.16 | ColumnsnVLanByPortStpHelloTime | read-only | deprecated | dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the r… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.17 | ColumnsnVLanByPortStpHoldTime | read-only | deprecated | dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be tra… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.18 | ColumnsnVLanByPortStpForwardDelay | read-only | deprecated | dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning sta… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.19 | ColumnsnVLanByPortStpTimeSinceTopologyChange | read-only | deprecated | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.20 | ColumnsnVLanByPortStpTopChanges | read-only | deprecated | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.21 | ColumnsnVLanByPortStpRootCost | read-only | deprecated | dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.22 | ColumnsnVLanByPortStpRootPort | read-only | deprecated | dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.23 | ColumnsnVLanByPortStpDesignatedRoot | read-only | deprecated | dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as execute… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.24 | ColumnsnVLanByPortBaseBridgeAddress | read-only | deprecated | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.25 | ColumnsnVLanByPortVLanName | read-write | deprecated | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.26 | ColumnsnVLanByPortRouterIntf | read-write | deprecated | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.27 | ColumnsnVLanByPortChassisPortMask | read-write | deprecated | The Chassis VLAN switch port membership. (It was obsoleted after release 07100, replaced by snVLanByPortPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.1.1.28 | ColumnsnVLanByPortPortList | read-only | deprecated | A list of port indices which are the port membership of a VLAN By Port. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the … |
| 1.3.6.1.4.1.1991.1.1.3.2.2 | TablesnVLanByProtocolTable | not-accessible | deprecated | . |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1 | RowsnVLanByProtocolEntry | not-accessible | deprecated | An entry in the VLAN By Protocol Configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.1 | ColumnsnVLanByProtocolVLanId | read-only | deprecated | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.2 | ColumnsnVLanByProtocolIndex | read-only | deprecated | |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.3 | ColumnsnVLanByProtocolDynamic | read-write | deprecated | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.4 | ColumnsnVLanByProtocolStaticMask | read-write | deprecated | The Standand-alone switch Protocol VLAN port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.5 | ColumnsnVLanByProtocolExcludeMask | read-write | deprecated | The Standand-alone switch Protocol VLAN port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.6 | ColumnsnVLanByProtocolRouterIntf | read-write | deprecated | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.7 | ColumnsnVLanByProtocolRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.8 | ColumnsnVLanByProtocolDynamicMask | read-only | deprecated | The Standand-alone switch Protocol VLAN active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.9 | ColumnsnVLanByProtocolChassisStaticMask | read-write | deprecated | The Chassis Protocol VLAN port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.10 | ColumnsnVLanByProtocolChassisExcludeMask | read-write | deprecated | The Chassis Protocol VLAN port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.11 | ColumnsnVLanByProtocolChassisDynamicMask | read-only | deprecated | The Chassis Protocol VLAN active port membership. (It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.12 | ColumnsnVLanByProtocolVLanName | read-write | deprecated | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.13 | ColumnsnVLanByProtocolStaticPortList | read-write | deprecated | A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slo… |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.14 | ColumnsnVLanByProtocolExcludePortList | read-write | deprecated | A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the … |
| 1.3.6.1.4.1.1991.1.1.3.2.2.1.15 | ColumnsnVLanByProtocolDynamicPortList | read-only | deprecated | A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit i… |
| 1.3.6.1.4.1.1991.1.1.3.2.3 | TablesnVLanByIpSubnetTable | not-accessible | deprecated | An entry of the VLAN By IPX Network Number Table. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1 | RowsnVLanByIpSubnetEntry | not-accessible | deprecated | An entry in the VLAN By IP Subnet Configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.1 | ColumnsnVLanByIpSubnetVLanId | read-only | deprecated | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.2 | ColumnsnVLanByIpSubnetIpAddress | read-only | deprecated | Subnet IP address. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.3 | ColumnsnVLanByIpSubnetSubnetMask | read-only | deprecated | Subnet mask associated with the Subnet IP address. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.4 | ColumnsnVLanByIpSubnetDynamic | read-write | deprecated | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.5 | ColumnsnVLanByIpSubnetStaticMask | read-write | deprecated | The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.6 | ColumnsnVLanByIpSubnetExcludeMask | read-write | deprecated | The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.7 | ColumnsnVLanByIpSubnetRouterIntf | read-write | deprecated | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.8 | ColumnsnVLanByIpSubnetRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.9 | ColumnsnVLanByIpSubnetDynamicMask | read-only | deprecated | The Standand-alone switch VLAN By Subnet active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.10 | ColumnsnVLanByIpSubnetChassisStaticMask | read-write | deprecated | The Chassis VLAN By Subnet port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.11 | ColumnsnVLanByIpSubnetChassisExcludeMask | read-write | deprecated | The Chassis VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.12 | ColumnsnVLanByIpSubnetChassisDynamicMask | read-only | deprecated | The Chassis VLAN By Subnet active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.13 | ColumnsnVLanByIpSubnetVLanName | read-write | deprecated | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.14 | ColumnsnVLanByIpSubnetStaticPortList | read-write | deprecated | A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the… |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.15 | ColumnsnVLanByIpSubnetExcludePortList | read-write | deprecated | A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is … |
| 1.3.6.1.4.1.1991.1.1.3.2.3.1.16 | ColumnsnVLanByIpSubnetDynamicPortList | read-only | deprecated | A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-b… |
| 1.3.6.1.4.1.1991.1.1.3.2.4 | TablesnVLanByIpxNetTable | not-accessible | deprecated | An entry of the VLAN By IPX Network Number Table. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1 | RowsnVLanByIpxNetEntry | not-accessible | deprecated | An entry in the VLAN By Ipx Network Number Configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.1 | ColumnsnVLanByIpxNetVLanId | read-only | deprecated | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.2 | ColumnsnVLanByIpxNetNetworkNum | read-only | deprecated | IPX Network Number. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.3 | ColumnsnVLanByIpxNetFrameType | read-only | deprecated | The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApp… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.4 | ColumnsnVLanByIpxNetDynamic | read-write | deprecated | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.5 | ColumnsnVLanByIpxNetStaticMask | read-write | deprecated | The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.6 | ColumnsnVLanByIpxNetExcludeMask | read-write | deprecated | The VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.7 | ColumnsnVLanByIpxNetRouterIntf | read-write | deprecated | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.8 | ColumnsnVLanByIpxNetRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.9 | ColumnsnVLanByIpxNetDynamicMask | read-only | deprecated | The VLAN By IPX network active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.10 | ColumnsnVLanByIpxNetChassisStaticMask | read-write | deprecated | The Chassis VLAN By IPX network port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.11 | ColumnsnVLanByIpxNetChassisExcludeMask | read-write | deprecated | The Chassis VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.12 | ColumnsnVLanByIpxNetChassisDynamicMask | read-only | deprecated | The Chassis VLAN By IPX network active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList) |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.13 | ColumnsnVLanByIpxNetVLanName | read-write | deprecated | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.14 | ColumnsnVLanByIpxNetStaticPortList | read-write | deprecated | A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is t… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.15 | ColumnsnVLanByIpxNetExcludePortList | read-write | deprecated | A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit i… |
| 1.3.6.1.4.1.1991.1.1.3.2.4.1.16 | ColumnsnVLanByIpxNetDynamicPortList | read-only | deprecated | A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8… |
| 1.3.6.1.4.1.1991.1.1.3.2.5 | TablesnVLanByATCableTable | not-accessible | deprecated | A Table Of VLAN By AppleTalk Network Number. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1 | RowsnVLanByATCableEntry | not-accessible | deprecated | An entry of the AppleTalk Cable VLAN table. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.1 | ColumnsnVLanByATCableVLanId | read-only | deprecated | The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.2 | ColumnsnVLanByATCableIndex | read-only | deprecated | AppleTalk Cable VLAN index number. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.3 | ColumnsnVLanByATCableRouterIntf | read-write | deprecated | A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interf… |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.4 | ColumnsnVLanByATCableRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.5 | ColumnsnVLanByATCableChassisStaticMask | read-write | deprecated | A list of ports which are statically configured to become port members of a VLAN. (It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortL… |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.6 | ColumnsnVLanByATCableVLanName | read-write | deprecated | VLAN Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.5.1.7 | ColumnsnVLanByATCableStaticPortList | read-write | deprecated | A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is … |
| 1.3.6.1.4.1.1991.1.1.3.2.6 | TablesnVLanByPortMemberTable | not-accessible | current | Port VLAN (Layer 2 VLAN) port membership table. |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1 | RowsnVLanByPortMemberEntry | not-accessible | current | An entry of the port VLAN membership table. |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.1 | ColumnsnVLanByPortMemberVLanId | read-only | current | The VLAN identifier (VLAN ID). |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.2 | ColumnsnVLanByPortMemberPortId | read-only | current | The ifIndex which is a member of the port VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.3 | ColumnsnVLanByPortMemberRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.2.6.1.4 | ColumnsnVLanByPortMemberTagMode | read-write | current | Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-defau… |
| 1.3.6.1.4.1.1991.1.1.3.2.7 | TablesnVLanByPortCfgTable | not-accessible | current | Port VLAN (Layer 2 VLAN) configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1 | RowsnVLanByPortCfgEntry | not-accessible | current | An entry of the port VLAN configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.1 | ColumnsnVLanByPortCfgVLanId | read-only | current | The VLAN identifier (VLAN ID). |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.2 | ColumnsnVLanByPortCfgQos | read-write | current | The Stand alone stackable switch VLAN Priority values are: level0(0) level1(1) The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), le… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.3 | ColumnsnVLanByPortCfgStpMode | read-write | current | Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.4 | ColumnsnVLanByPortCfgStpPriority | read-write | current | dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of … |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.5 | ColumnsnVLanByPortCfgStpGroupMaxAge | read-write | current | dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifi… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.6 | ColumnsnVLanByPortCfgStpGroupHelloTime | read-write | current | dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.7 | ColumnsnVLanByPortCfgStpGroupForwardDelay | read-write | current | dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.8 | ColumnsnVLanByPortCfgBaseNumPorts | read-only | current | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.9 | ColumnsnVLanByPortCfgBaseType | read-only | current | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.10 | ColumnsnVLanByPortCfgStpProtocolSpecification | read-only | current | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.11 | ColumnsnVLanByPortCfgStpMaxAge | read-only | current | dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.12 | ColumnsnVLanByPortCfgStpHelloTime | read-only | current | dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the r… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.13 | ColumnsnVLanByPortCfgStpHoldTime | read-only | current | dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be tra… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.14 | ColumnsnVLanByPortCfgStpForwardDelay | read-only | current | dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning sta… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.15 | ColumnsnVLanByPortCfgStpTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.16 | ColumnsnVLanByPortCfgStpTopChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.17 | ColumnsnVLanByPortCfgStpRootCost | read-only | current | dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.18 | ColumnsnVLanByPortCfgStpRootPort | read-only | current | dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.19 | ColumnsnVLanByPortCfgStpDesignatedRoot | read-only | current | dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as execute… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.20 | ColumnsnVLanByPortCfgBaseBridgeAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.21 | ColumnsnVLanByPortCfgVLanName | read-write | current | VLAN Community Name string. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.22 | ColumnsnVLanByPortCfgRouterIntf | read-write | current | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.23 | ColumnsnVLanByPortCfgRowStatus | read-write | current | Use object to delete a vlan entry. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.24 | ColumnsnVLanByPortCfgStpVersion | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.25 | ColumnsnVLanByPortCfgInOctets | read-only | deprecated | The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE. |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.26 | ColumnsnVLanByPortCfgMcastMode | read-write | current | Multicast (IGMP snooping) mode on the VLAN can be set either active or passive or disabled and the default is disabled. disabled(0)..... IP Multicast is disabl… |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.27 | ColumnsnVLanByPortCfgMcastVersion | read-write | current | Multicast version at this VLAN can be set 2 or 3, and the default is 2. The initial value is 0 |
| 1.3.6.1.4.1.1991.1.1.3.2.7.1.28 | ColumnsnVLanByPortCfgLoopDetectionMode | read-write | current | Port Loop Detection is a port-level/vlan , feature that checks for L2/L3 loops within topologies. There are 2 modes to this feature. Strict Mode (Per Port) and… |
| 1.3.6.1.4.1.1991.1.1.3.3 | NodesnSwPortInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.3.1 | TablesnSwPortInfoTable | not-accessible | deprecated | A specific snSwPortInfo group consists of a number of switch ports. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1 | RowsnSwPortInfoEntry | not-accessible | deprecated | An entry in the snSwPortInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwPortInfoTable requires the entired sequ… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.1 | ColumnsnSwPortInfoPortNum | read-only | deprecated | The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.2 | ColumnsnSwPortInfoMonitorMode | read-write | deprecated | DEPRECATED by snSwPortInfoMirrorMode and snPortMonitorTable. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.3 | ColumnsnSwPortInfoTagMode | read-write | deprecated | For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.4 | ColumnsnSwPortInfoChnMode | read-write | deprecated | The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.5 | ColumnsnSwPortInfoSpeed | read-write | deprecated | The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.6 | ColumnsnSwPortInfoMediaType | read-only | deprecated | The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits pe… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.7 | ColumnsnSwPortInfoConnectorType | read-only | deprecated | The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3).........… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.8 | ColumnsnSwPortInfoAdminStatus | read-write | deprecated | The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.9 | ColumnsnSwPortInfoLinkStatus | read-only | deprecated | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.10 | ColumnsnSwPortInfoPortQos | read-write | deprecated | The Stand alone stackable switch Port Qos Priority values are: low(0) high(1) The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.11 | ColumnsnSwPortInfoPhysAddress | read-only | deprecated | The port physical address. The physical address represents the switch port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.12 | ColumnsnSwPortStatsInFrames | read-only | deprecated | The total number of packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.13 | ColumnsnSwPortStatsOutFrames | read-only | deprecated | The total number of packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.14 | ColumnsnSwPortStatsAlignErrors | read-only | deprecated | dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS che… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.15 | ColumnsnSwPortStatsFCSErrors | read-only | deprecated | dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The co… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.16 | ColumnsnSwPortStatsMultiColliFrames | read-only | deprecated | dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one co… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.17 | ColumnsnSwPortStatsFrameTooLongs | read-only | deprecated | dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instanc… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.18 | ColumnsnSwPortStatsTxColliFrames | read-only | deprecated | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.19 | ColumnsnSwPortStatsRxColliFrames | read-only | deprecated | A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified … |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.20 | ColumnsnSwPortStatsFrameTooShorts | read-only | deprecated | A count of frames received on a particular interface that below the minimum permitted frame size. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.21 | ColumnsnSwPortLockAddressCount | read-write | deprecated | The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.22 | ColumnsnSwPortStpPortEnable | read-write | deprecated | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.23 | ColumnsnSwPortDhcpGateListId | read-write | deprecated | The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.24 | ColumnsnSwPortName | read-write | deprecated | Port Name string. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.25 | ColumnsnSwPortStatsInBcastFrames | read-only | deprecated | The total number of broadcast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.26 | ColumnsnSwPortStatsOutBcastFrames | read-only | deprecated | The total number of broadcast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.27 | ColumnsnSwPortStatsInMcastFrames | read-only | deprecated | The total number of multicast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.28 | ColumnsnSwPortStatsOutMcastFrames | read-only | deprecated | The total number of multicast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.29 | ColumnsnSwPortStatsInDiscard | read-only | deprecated | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.30 | ColumnsnSwPortStatsOutDiscard | read-only | deprecated | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.31 | ColumnsnSwPortStatsMacStations | read-only | deprecated | The total number of MAC Stations connected to the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.32 | ColumnsnSwPortCacheGroupId | read-write | deprecated | Cache Group ID for the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.33 | ColumnsnSwPortTransGroupId | read-write | deprecated | Transparent Group ID for the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.34 | ColumnsnSwPortInfoAutoNegotiate | read-write | deprecated | This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.35 | ColumnsnSwPortInfoFlowControl | read-write | deprecated | Enable/Disbale port flow control. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.36 | ColumnsnSwPortInfoGigType | read-only | deprecated | The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per secon… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.37 | ColumnsnSwPortStatsLinkChange | read-only | deprecated | The total number of link state change of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.38 | ColumnsnSwPortIfIndex | read-only | deprecated | In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.39 | ColumnsnSwPortDescr | read-only | deprecated | A textual string containing the slot/port information about the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.40 | ColumnsnSwPortInOctets | read-only | deprecated | The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 12… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.41 | ColumnsnSwPortOutOctets | read-only | deprecated | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined i… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.42 | ColumnsnSwPortStatsInBitsPerSec | read-only | deprecated | The number of bits per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.43 | ColumnsnSwPortStatsOutBitsPerSec | read-only | deprecated | The number of bits per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.44 | ColumnsnSwPortStatsInPktsPerSec | read-only | deprecated | The number of packets per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.45 | ColumnsnSwPortStatsOutPktsPerSec | read-only | deprecated | The number of packets per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.46 | ColumnsnSwPortStatsInUtilization | read-only | deprecated | The input network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.47 | ColumnsnSwPortStatsOutUtilization | read-only | deprecated | The output network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.48 | ColumnsnSwPortFastSpanPortEnable | read-write | deprecated | The enabled/disabled fast span port status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.49 | ColumnsnSwPortFastSpanUplinkEnable | read-write | deprecated | The enabled/disabled fast span uplink status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.50 | ColumnsnSwPortVlanId | read-write | deprecated | The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an inval… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.51 | ColumnsnSwPortRouteOnly | read-write | deprecated | Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable r… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.52 | ColumnsnSwPortPresent | read-only | deprecated | Indicate if the port is absent or present. This object only valid for M4 module |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.53 | ColumnsnSwPortGBICStatus | read-only | deprecated | Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set t… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.54 | ColumnsnSwPortStatsInKiloBitsPerSec | read-only | deprecated | Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.55 | ColumnsnSwPortStatsOutKiloBitsPerSec | read-only | deprecated | Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.56 | ColumnsnSwPortLoadInterval | read-write | deprecated | The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.57 | ColumnsnSwPortTagType | read-write | deprecated | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.58 | ColumnsnSwPortInLinePowerControl | read-write | deprecated | Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.59 | ColumnsnSwPortInLinePowerWattage | read-write | deprecated | Adjust the inline power wattage. Valid value between 1000 and 15400. Each unit is milliwatts. This object can only be set after snSwPortInLinePowerControl has … |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.60 | ColumnsnSwPortInLinePowerClass | read-write | deprecated | Adjust the inline power class. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port d… |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.61 | ColumnsnSwPortInLinePowerPriority | read-write | deprecated | Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.62 | ColumnsnSwPortInfoMirrorMode | read-write | deprecated | Enable/disable mirror on this port. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.63 | ColumnsnSwPortStatsInJumboFrames | read-only | deprecated | The total number of jumbo packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.64 | ColumnsnSwPortStatsOutJumboFrames | read-only | deprecated | The total number of jumbo packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.66 | ColumnsnSwPortInLinePowerConsumed | read-only | deprecated | Inline power consumed by the port. Each unit is milliwatts. |
| 1.3.6.1.4.1.1991.1.1.3.3.1.1.67 | ColumnsnSwPortInLinePowerPDType | read-only | deprecated | Inline Power device type 802.3af or Legacy device. |
| 1.3.6.1.4.1.1991.1.1.3.3.2 | NodesnInterfaceId | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.1 | NodesnEthernetInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.2 | NodesnPosInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.3 | NodesnAtmInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.4 | NodesnVirtualInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.5 | NodesnLoopbackInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.6 | NodesnGreTunnelInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.7 | NodesnSubInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.8 | NodesnMplsTunnelInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.9 | NodesnPvcInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.10 | NodesnMgmtEthernetInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.11 | NodesnTrunkInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.12 | NodesnVirtualMgmtInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.2.13 | Nodesn6to4TunnelInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.3.3 | TablesnInterfaceLookupTable | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.3.1 | RowsnInterfaceLookupEntry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.3.1.1 | ColumnsnInterfaceLookupInterfaceId | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.3.1.2 | ColumnsnInterfaceLookupIfIndex | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4 | TablesnIfIndexLookupTable | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4.1 | RowsnIfIndexLookupEntry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4.1.1 | ColumnsnIfIndexLookupIfIndex | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.4.1.2 | ColumnsnIfIndexLookupInterfaceId | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.5 | TablesnSwIfInfoTable | not-accessible | current | A specific snSwIfInfo group consists of a number of switch ports. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1 | RowsnSwIfInfoEntry | not-accessible | current | An entry in the snSwIfInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwIfInfoTable requires the entire sequence … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.1 | ColumnsnSwIfInfoPortNum | read-only | current | The port/interface index (ifindex). |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.2 | ColumnsnSwIfInfoMonitorMode | read-write | deprecated | DEPRECATED by snSwIf2MirrorMode and snPortMonitorTable. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.3 | ColumnsnSwIfInfoMirrorPorts | read-write | current | The list of port/interface index (ifindex), which mirror this interface, when monitoring is enabled. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.4 | ColumnsnSwIfInfoTagMode | read-write | current | Configure an interface as tagged member of non-default VLAN, untagged VLAN membership of the interface will not be modified, be it is default-VLAN or non-defau… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.5 | ColumnsnSwIfInfoTagType | read-write | current | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.6 | ColumnsnSwIfInfoChnMode | read-write | current | The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.7 | ColumnsnSwIfInfoSpeed | read-write | current | The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.8 | ColumnsnSwIfInfoMediaType | read-only | current | The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits pe… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.9 | ColumnsnSwIfInfoConnectorType | read-only | current | The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3).........… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.10 | ColumnsnSwIfInfoAdminStatus | read-write | current | The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.11 | ColumnsnSwIfInfoLinkStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.12 | ColumnsnSwIfInfoPortQos | read-write | current | The Stand alone stackable switch Port Qos Priority values are: low(0) high(1) The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.13 | ColumnsnSwIfInfoPhysAddress | read-only | current | The port physical address. The physical address represents the switch port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.14 | ColumnsnSwIfLockAddressCount | read-write | current | The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.15 | ColumnsnSwIfStpPortEnable | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.16 | ColumnsnSwIfDhcpGateListId | read-write | current | The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.17 | ColumnsnSwIfName | read-write | current | Port Name string. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.18 | ColumnsnSwIfDescr | read-only | current | A textual string containing the slot/port information about the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.19 | ColumnsnSwIfInfoAutoNegotiate | read-write | current | This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.20 | ColumnsnSwIfInfoFlowControl | read-write | current | Enable/Disbale port flow control. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.21 | ColumnsnSwIfInfoGigType | read-only | current | The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per secon… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.22 | ColumnsnSwIfFastSpanPortEnable | read-write | current | The enabled/disabled fast span port status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.23 | ColumnsnSwIfFastSpanUplinkEnable | read-write | current | The enabled/disabled fast span uplink status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.24 | ColumnsnSwIfVlanId | read-only | deprecated | This object return 0 due to no support for this object from FI 08.0.80 release. Write operation not-supported for this object. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.25 | ColumnsnSwIfRouteOnly | read-write | current | Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable r… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.26 | ColumnsnSwIfPresent | read-only | current | Indicate if the port is absent or present. This object only valid for M4 module. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.27 | ColumnsnSwIfGBICStatus | read-only | current | Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set t… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.28 | ColumnsnSwIfLoadInterval | read-write | current | The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.29 | ColumnsnSwIfStatsInFrames | read-only | current | The total number of packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.30 | ColumnsnSwIfStatsOutFrames | read-only | current | The total number of packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.31 | ColumnsnSwIfStatsAlignErrors | read-only | current | dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS che… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.32 | ColumnsnSwIfStatsFCSErrors | read-only | current | dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The co… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.33 | ColumnsnSwIfStatsMultiColliFrames | read-only | current | dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one co… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.34 | ColumnsnSwIfStatsTxColliFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.35 | ColumnsnSwIfStatsRxColliFrames | read-only | current | A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.36 | ColumnsnSwIfStatsFrameTooLongs | read-only | current | dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instanc… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.37 | ColumnsnSwIfStatsFrameTooShorts | read-only | current | A count of frames received on a particular interface that below the minimum permitted frame size. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.38 | ColumnsnSwIfStatsInBcastFrames | read-only | current | The total number of broadcast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.39 | ColumnsnSwIfStatsOutBcastFrames | read-only | current | The total number of broadcast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.40 | ColumnsnSwIfStatsInMcastFrames | read-only | current | The total number of multicast packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.41 | ColumnsnSwIfStatsOutMcastFrames | read-only | current | The total number of multicast packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.42 | ColumnsnSwIfStatsInDiscard | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.43 | ColumnsnSwIfStatsOutDiscard | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.44 | ColumnsnSwIfStatsMacStations | read-only | current | The total number of MAC Stations connected to the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.45 | ColumnsnSwIfStatsLinkChange | read-only | current | The total number of link state change of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.46 | ColumnsnSwIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 12… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.47 | ColumnsnSwIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined i… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.48 | ColumnsnSwIfStatsInBitsPerSec | read-only | current | The number of bits per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.49 | ColumnsnSwIfStatsOutBitsPerSec | read-only | current | The number of bits per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.50 | ColumnsnSwIfStatsInPktsPerSec | read-only | current | The number of packets per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.51 | ColumnsnSwIfStatsOutPktsPerSec | read-only | current | The number of packets per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.52 | ColumnsnSwIfStatsInUtilization | read-only | current | The input network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.53 | ColumnsnSwIfStatsOutUtilization | read-only | current | The output network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.54 | ColumnsnSwIfStatsInKiloBitsPerSec | read-only | current | Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.55 | ColumnsnSwIfStatsOutKiloBitsPerSec | read-only | current | Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.56 | ColumnsnSwIfStatsInJumboFrames | read-only | current | The total number of jumbo packets received on the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.57 | ColumnsnSwIfStatsOutJumboFrames | read-only | current | The total number of jumbo packets transmitted out of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.58 | ColumnsnSwIfInfoMirrorMode | read-write | current | Enable/disable mirror on this port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.59 | ColumnsnSwIfMacLearningDisable | read-write | deprecated | The status of MAC learning feature on an ethernet port. For POS port, Get operation will return the default value and Set operation will return an error. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.62 | ColumnsnSwIfInfoNativeMacAddress | read-only | current | The port native MAC address. The native MAC address represents the switch port. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.63 | ColumnsnSwIfQosMonitorDropCounterMode | read-write | current | Enable/disable monitoring egress drop counter on this port. ICX7150 has a set of queue drop counters. A port can be selected to associate with these counters. … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.64 | ColumnsnSwIfLRMAdapterPresent | read-only | current | To display the state for Long Reach Module (LRM) adapter is presented on this port. Some FastIron ICX devices support LRM optics on 10G fiber ports. LRM adapte… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.65 | ColumnsnSwIfStpBPDUGuardMode | read-write | current | The status of the spanning tree BPDU guard on an ethernet port. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.66 | ColumnsnSwIfStpRootGuardMode | read-write | current | The status of the spanning tree root guard on an ethernet port. Declare the port to be on root guard for all spanning trees. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.67 | ColumnsnSwIfRstpAdminEdgePortMode | read-write | current | The status of the rapid spanning tree admin edge port on an ethernet port. Declare the port to be an operational edge for all vlans. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.68 | ColumnsnSwIfInfoClockMode | read-write | current | The port can be configured to operate in either master or slave mode. The values are: none(0).........no configured or no support for clock mode, like fiber po… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.69 | ColumnsnSwIfProtectedMode | read-write | current | Protected port is a port-level, per-device/stack only, security feature that restricts communication with a device connected to the port. The default is false … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.70 | ColumnsnSwIfTrustDscpMode | read-write | current | The status of Trust DSCP on an ethernet port. The default is false state. |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.71 | ColumnsnSwIfVoiceVlanId | read-write | current | VLAN can be configurated as a voice over IP VLAN on an ethernet port. The valid range of voice VLAN ID is 1-4095. The value 0 means that the voice VLAN is not … |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.72 | ColumnsnSwIfPortLoopDetectionMode | read-write | current | Port Loop Detection is a port-level/vlan , feature that checks for L2/L3 loops within topologies. There are 2 modes to this feature. Strict Mode (Per Port) and… |
| 1.3.6.1.4.1.1991.1.1.3.3.5.1.73 | ColumnsnSWIfErrDisableStatus | read-only | current | The port's error disable status. The values are: not-error-disable(0).........the port is not under error disable state. bpdu-guard(1).......ERRDISABLE_BPDUGUA… |
| 1.3.6.1.4.1.1991.1.1.3.3.6 | TablesnIfOpticalMonitoringInfoTable | not-accessible | current | This table lists the instrumented parameters of all optical interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1 | RowsnIfOpticalMonitoringInfoEntry | not-accessible | current | Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.1 | ColumnsnIfOpticalMonitoringTemperature | read-only | current | This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xx… |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.2 | ColumnsnIfOpticalMonitoringTxPower | read-only | current | This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low… |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.3 | ColumnsnIfOpticalMonitoringRxPower | read-only | current | This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low wa… |
| 1.3.6.1.4.1.1991.1.1.3.3.6.1.4 | ColumnsnIfOpticalMonitoringTxBiasCurrent | read-only | current | Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. |
| 1.3.6.1.4.1.1991.1.1.3.3.7 | TablesnInterfaceLookup2Table | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.7.1 | RowsnInterfaceLookup2Entry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.7.1.1 | ColumnsnInterfaceLookup2InterfaceId | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.7.1.2 | ColumnsnInterfaceLookup2IfIndex | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8 | TablesnIfIndexLookup2Table | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8.1 | RowsnIfIndexLookup2Entry | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8.1.1 | ColumnsnIfIndexLookup2IfIndex | not-accessible | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.8.1.2 | ColumnsnIfIndexLookup2InterfaceId | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.3.9 | TablesnIfMediaInfoTable | not-accessible | current | This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated… |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1 | RowsnIfMediaInfoEntry | not-accessible | current | An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.1 | ColumnsnIfMediaType | read-only | current | The type of the media installed in the physical port. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.2 | ColumnsnIfMediaVendorName | read-only | current | The media vendor name, full name of the corporation. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.3 | ColumnsnIfMediaVersion | read-only | current | The media vendor product version number. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.4 | ColumnsnIfMediaPartNumber | read-only | current | The media vendor part number. |
| 1.3.6.1.4.1.1991.1.1.3.3.9.1.5 | ColumnsnIfMediaSerialNumber | read-only | current | The vendor serial number of the media device. |
| 1.3.6.1.4.1.1991.1.1.3.3.10 | TablesnIfOpticalLaneMonitoringTable | not-accessible | current | This table lists the instrumented parameters of all lanes within a 100G optic of type LR4 and LR10. LR4 has 4 lanes per optic, LR10 has 10 lanes per optic. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1 | RowsnIfOpticalLaneMonitoringEntry | not-accessible | current | Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.1 | ColumnsnIfOpticalLaneMonitoringLane | not-accessible | current | The lane number of this 100G optic. LR4 has 4, and LR10 has 10 lanes. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.2 | ColumnsnIfOpticalLaneMonitoringTemperature | read-only | current | This object holds the value of the transmitter laser diode temperature for the lane in the interface. This object indicates the health of the transmitter. The … |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.3 | ColumnsnIfOpticalLaneMonitoringTxPower | read-only | current | This object holds the value of the transmitter optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value,… |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.4 | ColumnsnIfOpticalLaneMonitoringRxPower | read-only | current | This object holds the value of the receiver optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or… |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.5 | ColumnsnIfOpticalLaneMonitoringTxBiasCurrent | read-only | current | Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm. |
| 1.3.6.1.4.1.1991.1.1.3.3.10.1.6 | ColumnsnIfOpticalLaneMonitoringVoltage | read-only | current | This object holds the value of the transmitter laser diode voltage for the lane in the interface. This object indicates the health of the transmitter. The form… |
| 1.3.6.1.4.1.1991.1.1.3.3.11 | TablebrcdIfEgressCounterInfoTable | not-accessible | current | This table lists the information of egress counters of all the queues in the physical ports. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1 | RowbrcdIfEgressCounterInfoEntry | not-accessible | current | An entry in the Interface Egress Counter Information table. The ifIndices of ethernet interfaces and the queue number will be used to index this table. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.1 | ColumnbrcdIfEgressCounterIfIndex | not-accessible | current | The port number of egress counter in the physical port. The port/interface index (ifindex). |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.2 | ColumnbrcdIfEgressCounterQueueId | not-accessible | current | The queue number of egress counter in the given port. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.3 | ColumnbrcdIfEgressCounterType | read-only | current | The queue type of the egress counter in a given port. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.4 | ColumnbrcdIfEgressCounterPkts | read-only | current | The egress packet counters of the queue in a given port. |
| 1.3.6.1.4.1.1991.1.1.3.3.11.1.5 | ColumnbrcdIfEgressCounterDropPkts | read-only | current | The egress dropped packet counters of the queue in a given port. ICX7150 platform has another set of queue drop counters which are displayed only when the port… |
| 1.3.6.1.4.1.1991.1.1.3.3.12 | TablesnSwIfInfoLimitTable | not-accessible | current | Rate limiting table for different types of traffic for a port. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1 | RowsnSwIfInfoLimitEntry | not-accessible | current | An entry in the snSwIfInfoLimit table indicates the configuration on a specified port for rate limiting values. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.1 | ColumnsnSwIfInfoLimitType | read-write | current | The type of the limit, the values specified in this row applies for, which takes on values broadcast, multicast, unknown-unicast. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.2 | ColumnsnSwIfInfoLimitPkts | read-write | current | Limit the number of packets to forward per second out of the switch port. Setting a value of 0 to this object disables the limitation check. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.3 | ColumnsnSwIfInfoLimitBits | read-write | current | Limit the number of kilo bytes to forward per second out of the switch port. Setting a value of 0 to this object disables the limitation check. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.4 | ColumnsnSwIfInfoLimitThreshold | read-write | current | The number of packets to be dropped when the rate limit is reached before taking the specified action like shutdown port. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.5 | ColumnsnSwIfInfoLimitShutdownTime | read-write | current | Specifies the time the port should be in down state and this takes effect only if Threshold is configured. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.6 | ColumnsnSwIfInfoLimitLog | read-write | current | Enable or disable the logging of the rate limit occurances. |
| 1.3.6.1.4.1.1991.1.1.3.3.12.1.7 | ColumnsnSwIfInfoLimitRowStatus | read-create | current | Specifies whether to config or unconfig the limit on the ifindex, for the LimitType, which takes on values config or unconfig. |
| 1.3.6.1.4.1.1991.1.1.3.4 | NodesnFdbInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.4.1 | TablesnFdbTable | not-accessible | current | This table contains snFdb information for each station known to the system, one entry per station. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1 | RowsnFdbEntry | not-accessible | current | Each entry represents the information of a static MAC station. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.1 | ColumnsnFdbStationIndex | read-only | current | The FDB Station index to the Fdb Station Table. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.2 | ColumnsnFdbStationAddr | read-write | current | The snFdbs physical address. The physical address represents a MAC Station. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.3 | ColumnsnFdbStationPort | read-write | deprecated | Station slot/port number. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.4 | ColumnsnFdbVLanId | read-write | current | The Station VLan ID. |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.5 | ColumnsnFdbStationQos | read-write | current | The Stand alone stackable station Qos Priority values are: low(0) high(1) The BigIron switch station Priority values are: level0(0), level1(1), level2(2), leve… |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.6 | ColumnsnFdbStationType | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.7 | ColumnsnFdbRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.4.1.1.8 | ColumnsnFdbStationIf | read-write | current | Station interface index. |
| 1.3.6.1.4.1.1991.1.1.3.5 | NodesnPortStpInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.5.1 | TablesnPortStpTable | not-accessible | deprecated | A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is ena… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1 | RowsnPortStpEntry | not-accessible | deprecated | An entry in the snPortStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPortStpTable requires the entired sequence of… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.1 | ColumnsnPortStpVLanId | read-only | deprecated | The VLAN ID of the VLAN switch community. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.2 | ColumnsnPortStpPortNum | read-only | deprecated | The port number of the Switch. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.3 | ColumnsnPortStpPortPriority | read-write | deprecated | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.4 | ColumnsnPortStpPathCost | read-write | deprecated | dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends t… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.5 | ColumnsnPortStpOperState | read-only | deprecated | By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. activated(1)......the Port STP … |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.6 | ColumnsnPortStpPortEnable | not-accessible | deprecated | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.7 | ColumnsnPortStpPortForwardTransitions | not-accessible | deprecated | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.8 | ColumnsnPortStpPortState | read-only | deprecated | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.9 | ColumnsnPortStpPortDesignatedCost | read-only | deprecated | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.10 | ColumnsnPortStpPortDesignatedRoot | read-only | deprecated | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.11 | ColumnsnPortStpPortDesignatedBridge | read-only | deprecated | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.12 | ColumnsnPortStpPortDesignatedPort | read-only | deprecated | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.13 | ColumnsnPortStpPortAdminRstp | read-write | deprecated | Enable or disable RSTP of a port which is a member of a VLAN. If the VLAN is not operating in RSTP, this object will return FALSE(2) and this object is not wri… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.14 | ColumnsnPortStpPortProtocolMigration | read-write | deprecated | When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.15 | ColumnsnPortStpPortAdminEdgePort | read-write | deprecated | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.1991.1.1.3.5.1.1.16 | ColumnsnPortStpPortAdminPointToPoint | read-write | deprecated | The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if i… |
| 1.3.6.1.4.1.1991.1.1.3.5.2 | TablesnIfStpTable | not-accessible | current | A specific snIfStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is enabl… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1 | RowsnIfStpEntry | not-accessible | current | An entry in the snIfStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snIfStpTable requires the entired sequence of the… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.1 | ColumnsnIfStpVLanId | read-only | current | The VLAN ID of the VLAN switch community. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.2 | ColumnsnIfStpPortNum | read-only | current | The port number of the Switch. It has the ifIndex value. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.3 | ColumnsnIfStpPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.4 | ColumnsnIfStpCfgPathCost | read-write | current | dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends t… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.5 | ColumnsnIfStpOperState | read-only | current | By default, this mode is set to notActivated(0). notActivated(0)...the Port STP or RSTP entry is not configured and not in running mode. activated(1)......the … |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.8 | ColumnsnIfStpPortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.9 | ColumnsnIfStpPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.10 | ColumnsnIfStpPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.11 | ColumnsnIfStpPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.12 | ColumnsnIfStpPortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.13 | ColumnsnIfStpPortAdminRstp | read-write | current | Enable or disable RSTP of a port which is a member of a VLAN. If the VLAN is not operating in RSTP, this object will return FALSE(2) and this object is not wri… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.14 | ColumnsnIfStpPortProtocolMigration | read-write | current | When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.15 | ColumnsnIfStpPortAdminEdgePort | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.16 | ColumnsnIfStpPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of TRUE(1) indicates that this port should always be treated as if i… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.17 | ColumnsnIfStpOperPathCost | read-only | current | dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends t… |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.18 | ColumnsnIfStpPortRole | read-only | current | STP/RSTP port role. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.19 | ColumnsnIfStpBPDUTransmitted | read-only | current | STP/RSTP bridge protocol unit transmitted counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.20 | ColumnsnIfStpBPDUReceived | read-only | current | STP/RSTP bridge protocol unit received counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.21 | ColumnsnIfRstpConfigBPDUReceived | read-only | current | RSTP configuration bridge protocol unit received counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.22 | ColumnsnIfRstpTCNBPDUReceived | read-only | current | RSTP topology change notification bridge protocol unit received counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.23 | ColumnsnIfRstpConfigBPDUTransmitted | read-only | current | RSTP configuration bridge protocol unit transmitted counter. |
| 1.3.6.1.4.1.1991.1.1.3.5.2.1.24 | ColumnsnIfRstpTCNBPDUTransmitted | read-only | current | RSTP topology change notification bridge protocol unit transmitted counter. |
| 1.3.6.1.4.1.1991.1.1.3.6 | NodesnTrunkInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.6.1 | TablesnTrunkTable | not-accessible | current | A specific snTrunkTable consists of a number of Trunk port-mask. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1 | RowsnTrunkEntry | not-accessible | current | An entry in the snTrunkTable indicates the configuration on a specified Trunk port membership. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1.1 | ColumnsnTrunkIndex | read-only | current | The number of the trunk entries can be configured. This can be 32*<slots> for Jetcore, and 16*<slots> for Ironcore. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1.2 | ColumnsnTrunkPortMask | read-write | current | Trunk membership of the Switch. |
| 1.3.6.1.4.1.1991.1.1.3.6.1.1.3 | ColumnsnTrunkType | read-write | current | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.1991.1.1.3.6.2 | TablesnMSTrunkTable | not-accessible | current | A table contains the configuration of port members of multi-slot trunk groups. |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1 | RowsnMSTrunkEntry | not-accessible | current | An entry of the snMSTrunkTable. |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.1 | ColumnsnMSTrunkPortIndex | read-only | current | The primary port of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5, 9, 13, … |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.2 | ColumnsnMSTrunkPortList | read-write | current | A list of port indices which are the port membership of a trunk group. Each port index is a 16-bit integer in big endian order. The first port index must be th… |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.3 | ColumnsnMSTrunkType | read-write | current | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.1991.1.1.3.6.2.1.4 | ColumnsnMSTrunkRowStatus | read-write | current | To create or delete a table entry. |
| 1.3.6.1.4.1.1991.1.1.3.6.3 | TablesnMSTrunkIfTable | not-accessible | current | A table contains the configuration of port members of multi-slot trunk groups. |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1 | RowsnMSTrunkIfEntry | not-accessible | current | An entry of the snMSTrunkIfTable. |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.1 | ColumnsnMSTrunkIfIndex | read-only | current | The primary port(IfIndex) of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5… |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.2 | ColumnsnMSTrunkIfList | read-write | current | A list of interface indices which are the port membership of a trunk group. Each interface index is a 16-bit integer in big endian order. The first interface/p… |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.3 | ColumnsnMSTrunkIfType | read-write | current | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.1991.1.1.3.6.3.1.4 | ColumnsnMSTrunkIfRowStatus | read-write | current | To create or delete a table entry. |
| 1.3.6.1.4.1.1991.1.1.3.7 | NodesnSwSummary | |||
| 1.3.6.1.4.1.1991.1.1.3.7.1 | ScalarsnSwSummaryMode | read-write | current | The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configur… |
| 1.3.6.1.4.1.1991.1.1.3.8 | NodesnDhcpGatewayListInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.8.1 | TablesnDhcpGatewayListTable | not-accessible | current | A table of DHCP gateway list of addresses. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1 | RowsnDhcpGatewayListEntry | not-accessible | current | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1.1 | ColumnsnDhcpGatewayListId | read-only | current | The ID for a DHCP gateway list entry. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1.2 | ColumnsnDhcpGatewayListAddrList | read-write | current | The DHCP gateway address list for each DHCP gateway list ID. This list contains 1 to 8 IP addresses represented by octet string. |
| 1.3.6.1.4.1.1991.1.1.3.8.1.1.3 | ColumnsnDhcpGatewayListRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.9 | NodesnDnsInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.9.1 | ScalarsnDnsDomainName | read-write | current | DNS Domain Name string. |
| 1.3.6.1.4.1.1991.1.1.3.9.2 | ScalarsnDnsGatewayIpAddrList | read-write | current | The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string. |
| 1.3.6.1.4.1.1991.1.1.3.10 | NodesnMacFilter | |||
| 1.3.6.1.4.1.1991.1.1.3.10.1 | TablesnMacFilterTable | not-accessible | current | MAC filter table. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1 | RowsnMacFilterEntry | not-accessible | current | An entry in the MAC filter table. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.1 | ColumnsnMacFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.2 | ColumnsnMacFilterAction | read-write | current | Action to take if the Mac packet match with this filter. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.3 | ColumnsnMacFilterSourceMac | read-write | current | Source MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.4 | ColumnsnMacFilterSourceMask | read-write | current | Source MAC subnet mask. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.5 | ColumnsnMacFilterDestMac | read-write | current | Destination MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.6 | ColumnsnMacFilterDestMask | read-write | current | Destination MAC subnet mask. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.7 | ColumnsnMacFilterOperator | read-write | current | Type of comparison to perform. |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.8 | ColumnsnMacFilterFrameType | read-write | current | Frame Type: ethernet-type, LLC and SNAP types |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.9 | ColumnsnMacFilterFrameTypeNum | read-write | current | Frame Type Number. 0 means NA |
| 1.3.6.1.4.1.1991.1.1.3.10.1.1.10 | ColumnsnMacFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.10.2 | TablesnMacFilterPortAccessTable | not-accessible | deprecated | MAC Filter port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1 | RowsnMacFilterPortAccessEntry | not-accessible | deprecated | An entry in the MAC Filter Port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1.1 | ColumnsnMacFilterPortAccessPortIndex | read-only | deprecated | The port index. For FastIron/NetIron products, port index value is from 1 to 42 For BigIron products, port index is an encoded number: The bit 0 to bit 7: port… |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1.2 | ColumnsnMacFilterPortAccessFilters | read-write | deprecated | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.1991.1.1.3.10.2.1.3 | ColumnsnMacFilterPortAccessRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.10.3 | TablesnMacFilterIfAccessTable | not-accessible | current | MAC Filter port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1 | RowsnMacFilterIfAccessEntry | not-accessible | current | An entry in the MAC Filter Port access table. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1.1 | ColumnsnMacFilterIfAccessPortIndex | read-only | current | The port/interface index. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1.2 | ColumnsnMacFilterIfAccessFilters | read-write | current | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.1991.1.1.3.10.3.1.3 | ColumnsnMacFilterIfAccessRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.11 | NodesnNTP | |||
| 1.3.6.1.4.1.1991.1.1.3.11.1 | NodesnNTPGeneral | |||
| 1.3.6.1.4.1.1991.1.1.3.11.1.1 | ScalarsnNTPPollInterval | read-write | current | Interval specifies how often to poll the NTP server. Each unit is one second. |
| 1.3.6.1.4.1.1991.1.1.3.11.1.2 | ScalarsnNTPTimeZone | read-write | current | Time zone. |
| 1.3.6.1.4.1.1991.1.1.3.11.1.3 | ScalarsnNTPSummerTimeEnable | read-write | current | Enable/Disable daylight saving time. This enables daylight saving time for time/date starting 02:00:00 of first Sunday in April and ending 02:00:00 of last Sun… |
| 1.3.6.1.4.1.1991.1.1.3.11.1.4 | ScalarsnNTPSystemClock | read-write | current | System clock, in the following format: octet 0: seconds after the minute [0-60] octet 1: minutes after the hour [0-59] octet 2: hours since midnight [0-23] oct… |
| 1.3.6.1.4.1.1991.1.1.3.11.1.5 | ScalarsnNTPSync | read-write | current | Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. For get operation, always return 'other(1)'. |
| 1.3.6.1.4.1.1991.1.1.3.11.2 | TablesnNTPServerTable | not-accessible | current | NTP (Network Time Protocol) server table. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1 | RowsnNTPServerEntry | not-accessible | current | An entry in the NTP server table. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1.1 | ColumnsnNTPServerIp | read-only | current | NTP server IP address. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1.2 | ColumnsnNTPServerVersion | read-write | current | NTP server version. |
| 1.3.6.1.4.1.1991.1.1.3.11.2.1.3 | ColumnsnNTPServerRowStatus | read-write | current | To create or delete a NTP server table entry. |
| 1.3.6.1.4.1.1991.1.1.3.12 | NodesnRadius | |||
| 1.3.6.1.4.1.1991.1.1.3.12.1 | NodesnRadiusGeneral | |||
| 1.3.6.1.4.1.1991.1.1.3.12.1.1 | ScalarsnRadiusSNMPAccess | read-only | current | Indicate whether Radius group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Radius group MIB objects return 'general error'. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.2 | ScalarsnRadiusEnableTelnetAuth | read-write | current | Enable/Disable telnet authentication specified by 'snRadiusLoginMethod'. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.3 | ScalarsnRadiusRetransmit | read-write | current | The number of authentication query retransmissions to the Radius server. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.4 | ScalarsnRadiusTimeOut | read-write | current | Interval specifies how long to wait for authentication reply from the Radius server, each unit is one second. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.5 | ScalarsnRadiusDeadTime | read-write | current | Interval specifies Radius server dead time, each unit is one minute. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.6 | ScalarsnRadiusKey | read-write | current | Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. |
| 1.3.6.1.4.1.1991.1.1.3.12.1.7 | ScalarsnRadiusLoginMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user login process. Each octet has the following enumeration value: en… |
| 1.3.6.1.4.1.1991.1.1.3.12.1.8 | ScalarsnRadiusEnableMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user entering priviledge mode of the command line interface. Each octe… |
| 1.3.6.1.4.1.1991.1.1.3.12.1.9 | ScalarsnRadiusWebServerMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the web-server. Each octet has the following enumeratio… |
| 1.3.6.1.4.1.1991.1.1.3.12.1.10 | ScalarsnRadiusSNMPServerMethod | read-write | current | A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the snmp-server. Each octet has the following enumerati… |
| 1.3.6.1.4.1.1991.1.1.3.12.2 | TablesnRadiusServerTable | not-accessible | current | Radius server table. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1 | RowsnRadiusServerEntry | not-accessible | current | An entry in the Radius server table. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.1 | ColumnsnRadiusServerIp | read-only | current | Radius server IP address. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.2 | ColumnsnRadiusServerAuthPort | read-write | current | Authentication UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.3 | ColumnsnRadiusServerAcctPort | read-write | current | Account UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.4 | ColumnsnRadiusServerRowStatus | read-write | current | To create or delete a Radius server table entry. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.5 | ColumnsnRadiusServerRowKey | read-write | current | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.1991.1.1.3.12.2.1.6 | ColumnsnRadiusServerUsage | read-write | current | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.1991.1.1.3.13 | NodesnTacacs | |||
| 1.3.6.1.4.1.1991.1.1.3.13.1 | NodesnTacacsGeneral | |||
| 1.3.6.1.4.1.1991.1.1.3.13.1.1 | ScalarsnTacacsRetransmit | read-write | current | The number of authentication query retransmissions to the Tacacs server. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.2 | ScalarsnTacacsTimeOut | read-write | current | Interval specifies how long to wait for authentication reply from the Tacacs server, each unit is one second. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.3 | ScalarsnTacacsDeadTime | read-write | current | Interval specifies Tacacs server dead time, each unit is one minute. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.4 | ScalarsnTacacsKey | read-write | current | Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. |
| 1.3.6.1.4.1.1991.1.1.3.13.1.5 | ScalarsnTacacsSNMPAccess | read-only | current | Indicate whether Tacacs group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Tacacs group MIB objects return 'general error'. |
| 1.3.6.1.4.1.1991.1.1.3.13.2 | TablesnTacacsServerTable | not-accessible | current | Tacacs server table. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1 | RowsnTacacsServerEntry | not-accessible | current | An entry in the Tacacs server table. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.1 | ColumnsnTacacsServerIp | read-only | current | Tacacs server IP address. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.2 | ColumnsnTacacsServerAuthPort | read-write | current | Authentication UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.3 | ColumnsnTacacsServerRowStatus | read-write | current | To create or delete a Tacacs server table entry. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.4 | ColumnsnTacacsServerRowKey | read-write | current | Authentication key displayed as encrypted text. Write operation can only be done if the SET request uses SNMPv3 with data encrypted using privacy key. |
| 1.3.6.1.4.1.1991.1.1.3.13.2.1.5 | ColumnsnTacacsServerUsage | read-write | current | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.1991.1.1.3.14 | NodesnQos | |||
| 1.3.6.1.4.1.1991.1.1.3.14.1 | TablesnQosProfileTable | not-accessible | current | A table contains the configuration of qos profile groups. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1 | RowsnQosProfileEntry | not-accessible | current | An entry of the snQosProfileTable. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.1 | ColumnsnQosProfileIndex | read-only | current | The table index of QOS Profile. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.2 | ColumnsnQosProfileName | read-write | current | Qos Profile Name string. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.3 | ColumnsnQosProfileRequestedBandwidth | read-write | current | Qos Profile Requested Bandwidth. |
| 1.3.6.1.4.1.1991.1.1.3.14.1.1.4 | ColumnsnQosProfileCalculatedBandwidth | read-only | current | Qos Profile Calculated Bandwidth. |
| 1.3.6.1.4.1.1991.1.1.3.14.2 | TablesnQosBindTable | not-accessible | current | A table contains the configuration of 802.1p to qos profile binding groups. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1 | RowsnQosBindEntry | not-accessible | current | An entry of the snQosBindTable. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1.1 | ColumnsnQosBindIndex | read-only | current | The table index of QOS Bind. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1.2 | ColumnsnQosBindPriority | read-only | current | QOS bind priority. |
| 1.3.6.1.4.1.1991.1.1.3.14.2.1.3 | ColumnsnQosBindProfileIndex | read-write | current | QOS Bind Profile Index. This is pointer to the index of snQosProfile Table. |
| 1.3.6.1.4.1.1991.1.1.3.14.3 | NodesnDosAttack | |||
| 1.3.6.1.4.1.1991.1.1.3.14.3.1 | NodesnDosAttackGlobal | |||
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.1 | ScalarsnDosAttackICMPDropCount | read-only | current | ICMP drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.2 | ScalarsnDosAttackICMPBlockCount | read-only | current | ICMP block counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.3 | ScalarsnDosAttackSYNDropCount | read-only | current | SYN drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.1.4 | ScalarsnDosAttackSYNBlockCount | read-only | current | SYN block counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2 | TablesnDosAttackPortTable | not-accessible | current | Denial of service attack port table. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1 | RowsnDosAttackPortEntry | not-accessible | current | An entry of the denial of service attack port table. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.1 | ColumnsnDosAttackPort | read-only | current | ifIndex value of a port. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.2 | ColumnsnDosAttackPortICMPDropCount | read-only | current | ICMP drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.3 | ColumnsnDosAttackPortICMPBlockCount | read-only | current | ICMP block counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.4 | ColumnsnDosAttackPortSYNDropCount | read-only | current | SYN drop counter. |
| 1.3.6.1.4.1.1991.1.1.3.14.3.2.1.5 | ColumnsnDosAttackPortSYNBlockCount | read-only | current | SYN block counter. |
| 1.3.6.1.4.1.1991.1.1.3.15 | NodesnAAA | |||
| 1.3.6.1.4.1.1991.1.1.3.15.1 | NodesnAuthentication | |||
| 1.3.6.1.4.1.1991.1.1.3.15.1.1 | ScalarsnAuthenticationDot1x | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authenticat… |
| 1.3.6.1.4.1.1991.1.1.3.15.1.2 | ScalarsnAuthenticationEnable | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.1.3 | ScalarsnAuthenticationLogin | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.1.4 | ScalarsnAuthenticationSnmpserver | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.1.5 | ScalarsnAuthenticationWebserver | read-write | current | A sequence of authentication methods. Each octet represents a method to authorize the user command. Each octet has the following value: enable(1) - Use enable … |
| 1.3.6.1.4.1.1991.1.1.3.15.2 | NodesnAuthorization | |||
| 1.3.6.1.4.1.1991.1.1.3.15.2.1 | ScalarsnAuthorizationCommandMethods | read-write | current | A sequence of authorization methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authorize by… |
| 1.3.6.1.4.1.1991.1.1.3.15.2.2 | ScalarsnAuthorizationCommandLevel | read-write | current | Commands, which are equal to and less than the specified command level here needs to be authorized. Possible enumeration values: 0 - Privilege level 0 4 - Priv… |
| 1.3.6.1.4.1.1991.1.1.3.15.2.3 | ScalarsnAuthorizationExec | read-write | current | A sequence of exec authorization methods. Each octet represents a method for telnet or SSH login authorization. Each octet has the following enumeration value:… |
| 1.3.6.1.4.1.1991.1.1.3.15.2.4 | ScalarsnAuthorizationCoaEnable | read-write | current | For change of Authorization (COA) enable. Possible enumeration values: 1 - Enable COA 0 - No Enable COA. |
| 1.3.6.1.4.1.1991.1.1.3.15.2.5 | ScalarsnAuthorizationCoaIgnore | read-write | current | For change of Authorization (COA) ignore COA commands. Possible enumeration values: dm-request(1) - Disconnect message request modify-acl(2) - Modify access co… |
| 1.3.6.1.4.1.1991.1.1.3.15.3 | NodesnAccounting | |||
| 1.3.6.1.4.1.1991.1.1.3.15.3.1 | ScalarsnAccountingCommandMethods | read-write | current | A sequence of accounting methods. Each octet represents a method to account for the user command. Each octet has the following enumeration value: radius(2) - s… |
| 1.3.6.1.4.1.1991.1.1.3.15.3.2 | ScalarsnAccountingCommandLevel | read-write | current | Commands, which are equal to and less than the specified command level here will be accounted. Possible enumeration values: level0 - Privilege level 0 level4 -… |
| 1.3.6.1.4.1.1991.1.1.3.15.3.3 | ScalarsnAccountingExec | read-write | current | A sequence of accounting methods. Each octet represents a method for telnet or SSH login accounting. Each octet has the following enumeration value: radius(2) … |
| 1.3.6.1.4.1.1991.1.1.3.15.3.4 | ScalarsnAccountingSystem | read-write | current | A sequence of accounting methods. Each octet represents a method to account for the system related events. Each octet has the following enumeration value: radi… |
| 1.3.6.1.4.1.1991.1.1.3.16 | IdentitysnCAR | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.1.3.16.1 | NodesnPortCARs | |||
| 1.3.6.1.4.1.1991.1.1.3.16.1.1 | TablesnPortCARTable | not-accessible | current | A table of rate limit configuration entries. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets … |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1 | RowsnPortCAREntry | not-accessible | current | A collection of rate-limit configuration objects on this interface. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.1 | ColumnsnPortCARifIndex | read-only | current | The ifIndex value for this rate limit entry. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.2 | ColumnsnPortCARDirection | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.3 | ColumnsnPortCARRowIndex | read-only | current | The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.4 | ColumnsnPortCARType | read-only | current | The type of traffic rate-limited against. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.5 | ColumnsnPortCARAccIdx | read-only | current | The index to the access list if RateLimitType is either quickAcc or standardAcc. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.6 | ColumnsnPortCARRate | read-create | current | The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in … |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.7 | ColumnsnPortCARLimit | read-create | current | This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes th… |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.8 | ColumnsnPortCARExtLimit | read-only | current | This is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.9 | ColumnsnPortCARConformAction | read-only | current | Action to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent r… |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.10 | ColumnsnPortCARExceedAction | read-only | current | Action to be taken when the traffic exceeds the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate… |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.11 | ColumnsnPortCARStatSwitchedPkts | read-only | current | The counter of packets permitted by this rate limit. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.12 | ColumnsnPortCARStatSwitchedBytes | read-only | current | The counter of bytes permitted by this interface. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.13 | ColumnsnPortCARStatFilteredPkts | read-only | current | The counter of packets which exceeded this rate limit. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.14 | ColumnsnPortCARStatFilteredBytes | read-only | current | The counter of bytes which exceeded this rate limit. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.15 | ColumnsnPortCARStatCurBurst | read-only | current | The current received burst size. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.1.1.16 | ColumnsnPortCARRowStatus | read-create | current | The variable is used to create new row in the rate limit table, only CreateAndGo(4) and destroy(6) are supported values |
| 1.3.6.1.4.1.1991.1.1.3.16.1.2 | TableagRateLimitCounterTable | not-accessible | current | A table of rate limit counter entries. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.2.1 | RowagRateLimitCounterEntry | not-accessible | current | A collection of rate-limit counter objects on a interface, direction and configuration row index within that interface. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.2.1.1 | ColumnagRateLimitCounterFwdedOctets | read-only | current | The forwarded octet count for this rate limit entry. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.2.1.2 | ColumnagRateLimitCounterDroppedOctets | read-only | current | The dropped octet count for this rate limit entry. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.2.1.3 | ColumnagRateLimitCounterReMarkedOctets | read-only | current | The remarked octet count for this rate limit entry. |
| 1.3.6.1.4.1.1991.1.1.3.16.1.2.1.4 | ColumnagRateLimitCounterTotalOctets | read-only | current | The total octet count for this rate limit entry. |
| 1.3.6.1.4.1.1991.1.1.3.17 | NodesnVLanCAR | |||
| 1.3.6.1.4.1.1991.1.1.3.18 | NodesnNetFlow | |||
| 1.3.6.1.4.1.1991.1.1.3.18.1 | NodesnNetFlowGlb | |||
| 1.3.6.1.4.1.1991.1.1.3.18.1.1 | ScalarsnNetFlowGblEnable | read-write | current | Enable/disable NetFlow export operation. |
| 1.3.6.1.4.1.1991.1.1.3.18.1.2 | ScalarsnNetFlowGblVersion | read-write | current | NetFlow export version. |
| 1.3.6.1.4.1.1991.1.1.3.18.1.3 | ScalarsnNetFlowGblProtocolDisable | read-write | current | bit 0 - other, disable all protocols export except UDP and TCP bit 1 - tcp, disable TCP protocol export bit 2 - udp, disable UDP protocol export |
| 1.3.6.1.4.1.1991.1.1.3.18.1.4 | ScalarsnNetFlowGblActiveTimeout | read-write | current | Maximum time an active flow can be in the NetFlow cache (minutes: 1..60) |
| 1.3.6.1.4.1.1991.1.1.3.18.1.5 | ScalarsnNetFlowGblInactiveTimeout | read-write | current | Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600) |
| 1.3.6.1.4.1.1991.1.1.3.18.2 | TablesnNetFlowCollectorTable | not-accessible | current | A table of each NetFlow collector information. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1 | RowsnNetFlowCollectorEntry | not-accessible | current | A row in the NetFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.1 | ColumnsnNetFlowCollectorIndex | read-only | current | The index to the NetFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.2 | ColumnsnNetFlowCollectorIp | read-write | current | The NetFlow collector ip address. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.3 | ColumnsnNetFlowCollectorUdpPort | read-write | current | The NetFlow collector UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.4 | ColumnsnNetFlowCollectorSourceInterface | read-write | current | The ifIndex value to specify source port to export NetFlow packet. Value 0 to indicate default outgoing port. |
| 1.3.6.1.4.1.1991.1.1.3.18.2.1.5 | ColumnsnNetFlowCollectorRowStatus | read-write | current | To create or delete a NetFlow collector table entry. |
| 1.3.6.1.4.1.1991.1.1.3.18.3 | TablesnNetFlowAggregationTable | not-accessible | current | A table of each NetFlow aggregation scheme information. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1 | RowsnNetFlowAggregationEntry | not-accessible | current | A row in the NetFlow Aggregation table. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.1 | ColumnsnNetFlowAggregationIndex | read-only | current | The Aggregation scheme ID |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.2 | ColumnsnNetFlowAggregationIp | read-write | current | The NetFlow aggregation collector ip address. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.3 | ColumnsnNetFlowAggregationUdpPort | read-write | current | The NetFlow aggregation collector UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.4 | ColumnsnNetFlowAggregationSourceInterface | read-write | current | The ifIndex value to specify source port to export NetFlow aggregation packet. Value 0 to indicate default outgoing port. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.5 | ColumnsnNetFlowAggregationNumberOfCacheEntries | read-write | current | Number of cache entries for aggregation scheme |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.6 | ColumnsnNetFlowAggregationActiveTimeout | read-write | current | Maximum time an active flow can be in the aggregation cache |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.7 | ColumnsnNetFlowAggregationInactiveTimeout | read-write | current | Maximum time an inactive flow can be in the aggregation cache |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.8 | ColumnsnNetFlowAggregationEnable | read-write | current | Enable/disable NetFlow aggregation for this aggregation scheme. |
| 1.3.6.1.4.1.1991.1.1.3.18.3.1.9 | ColumnsnNetFlowAggregationRowStatus | read-write | current | To create or delete a NetFlow collector table entry. |
| 1.3.6.1.4.1.1991.1.1.3.18.4 | TablesnNetFlowIfTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.1991.1.1.3.18.4.1 | RowsnNetFlowIfEntry | not-accessible | current | Entry containing the type of switching performed on that interface. |
| 1.3.6.1.4.1.1991.1.1.3.18.4.1.1 | ColumnsnNetFlowIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.1991.1.1.3.18.4.1.2 | ColumnsnNetFlowIfFlowSwitching | read-write | current | To enable/disable flow switching in a particular interface: disable (0) - no flow switching enable (1) - flow switching |
| 1.3.6.1.4.1.1991.1.1.3.19 | NodesnSFlow | |||
| 1.3.6.1.4.1.1991.1.1.3.19.1 | NodesnSFlowGlb | |||
| 1.3.6.1.4.1.1991.1.1.3.19.1.1 | ScalarsnSflowStatus | read-only | current | To enable/disable sflow sampling on all the interfaces. disabled - sflow sampling disabled enableed - sflow sampling enabled Unless globally enabled, it can't … |
| 1.3.6.1.4.1.1991.1.1.3.19.1.2 | ScalarsnSflowSampleRate | read-only | current | To set the rate wt which the packet sampling to happen. A value of 512 means, every 512th packet is simpleed for flow collection. |
| 1.3.6.1.4.1.1991.1.1.3.19.1.3 | ScalarsnSflowSourcePort | read-only | current | To set the UDP source port for sending the sflow samples to the configured collectors. Any permissible value can be configured for this and default is 8888. |
| 1.3.6.1.4.1.1991.1.1.3.19.1.4 | ScalarsnSflowAgentAddrType | read-only | current | To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determi… |
| 1.3.6.1.4.1.1991.1.1.3.19.1.5 | ScalarsnSflowAgentAddr | read-only | current | To set the Agent IPv4/IPv6 address type on the switch. Sflow uses the Agent IP address in the samples sent to collector and this address is dynamically determi… |
| 1.3.6.1.4.1.1991.1.1.3.19.2 | TablesnSflowCollectorTable | not-accessible | current | Table of all but first sFlow collectors. The first collector can be configured using sFlowTable in RFC 3176. The RFC cannot be used to configure more than one … |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1 | RowsnSflowCollectorEntry | not-accessible | current | A row in the sFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.1 | ColumnsnSflowCollectorIndex | read-only | current | The index to the sFlow collector table. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.2 | ColumnsnSflowCollectorIP | read-write | current | The sFlow collector ip address. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.3 | ColumnsnSflowCollectorUDPPort | read-write | current | The sFlow collector UDP port number. |
| 1.3.6.1.4.1.1991.1.1.3.19.2.1.4 | ColumnsnSflowCollectorRowStatus | read-write | current | To create, update or delete a SFlow collector table entry. If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away… |
| 1.3.6.1.4.1.1991.1.1.3.20 | NodesnFDP | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1 | NodesnFdpMIBObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.1 | NodesnFdpInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1 | TablesnFdpInterfaceTable | not-accessible | current | Status of FDP on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1 | RowsnFdpInterfaceEntry | not-accessible | current | An entry in the snFdpInterfaceTable, having the status of FDP on an interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.1 | ColumnsnFdpInterfaceIfIndex | not-accessible | current | ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.2 | ColumnsnFdpInterfaceFdpEnable | read-write | current | The flag, whether the Ruckus Wireless Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE). |
| 1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.3 | ColumnsnFdpInterfaceCdpEnable | read-write | current | The flag, whether the Cisco Discovery Protocol is currently running on this interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE). |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2 | NodesnFdpCache | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1 | TablesnFdpCacheTable | not-accessible | current | The table for the cached information obtained via receiving FDP/CDP messages. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1 | RowsnFdpCacheEntry | not-accessible | current | An entry in the snFdpCacheTable, having the information received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is r… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.1 | ColumnsnFdpCacheIfIndex | not-accessible | current | ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.2 | ColumnsnFdpCacheDeviceIndex | not-accessible | current | Identification of a device, which sent FDP/CDP messages |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.3 | ColumnsnFdpCacheDeviceId | read-only | current | The Device-ID string as reported in the most recent FDP/CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent … |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.4 | ColumnsnFdpCacheAddressType | read-only | current | An indication of the type of address contained in the corresponding instance of snFdpCacheAddress. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.5 | ColumnsnFdpCacheAddress | read-only | current | The (first) network-layer address of the device as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.6 | ColumnsnFdpCacheVersion | read-only | current | Version string as reported in the most recent FDP/CDP message. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.7 | ColumnsnFdpCacheDevicePort | read-only | current | The Port-ID string as reported in the most recent FDP/CDP message. This will typically be the value of the ifName object (e.g., Ethernet0). The zero-length str… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.8 | ColumnsnFdpCachePlatform | read-only | current | The Device's Hardware Platform as reported in the most recent FDP/CDP message. The zero-length string indicates that no Platform field (TLV) was reported in th… |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.9 | ColumnsnFdpCacheCapabilities | read-only | current | The Device's Functional Capabilities as reported in the most recent FDP/CDP message. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.10 | ColumnsnFdpCacheVendorId | read-only | current | Indicates the entry received by either FDP or CDP. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.11 | ColumnsnFdpCacheIsAggregateVlan | read-only | current | Neighbor device is in aggregated-vlan. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.12 | ColumnsnFdpCacheTagType | read-only | current | Neighbor device tag-type. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.13 | ColumnsnFdpCachePortVlanMask | read-only | current | Neighbor device port VLAN masks in 512-byte octet string. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.14 | ColumnsnFdpCachePortTagMode | read-only | current | Neighbor device port tag mode. Dual(3) mode not supported from FI 08.0.80 release. This object will return 0 for dual(3) Mode. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.15 | ColumnsnFdpCacheDefaultTrafficeVlanIdForDualMode | read-only | deprecated | This object return 0 due to no support for this object from FI 08.0.80 release. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3 | NodesnFdpGlobal | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.1 | ScalarsnFdpGlobalRun | read-write | current | The flag, whether the Ruckus Wireless Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.2 | ScalarsnFdpGlobalMessageInterval | read-write | current | The interval at which FDP messages are to be generated. The default value is 60 seconds. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.3 | ScalarsnFdpGlobalHoldTime | read-write | current | The time for the receiving device holds FDP message. The default value is 180 seconds. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.3.4 | ScalarsnFdpGlobalCdpRun | read-write | current | An indication of whether the Cisco Discovery Protocol is currently running. CDP entries in snFdpCacheTable are deleted when CDP is disabled. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4 | NodesnFdpCachedAddr | |||
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1 | TablesnFdpCachedAddressTable | not-accessible | current | Cached address table from receiving FDP/CDP messages. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1 | RowsnFdpCachedAddressEntry | not-accessible | current | An entry (conceptual row) in the snFdpCacheAddressTable, containing one cached address from FDP/CDP messages. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.1 | ColumnsnFdpCachedAddrIfIndex | not-accessible | current | The ifIndex value of the local interface. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.2 | ColumnsnFdpCachedAddrDeviceIndex | not-accessible | current | A unique vlaue for each device from which FDP/CDP messages are being received. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.3 | ColumnsnFdpCachedAddrDeviceAddrEntryIndex | not-accessible | current | A unique vlaue for address entry in device from which FDP/CDP messages are being received. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.4 | ColumnsnFdpCachedAddrType | read-only | current | An indication of the type of address contained in the corresponding instance of snFdpCacheAddrValue. |
| 1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.5 | ColumnsnFdpCachedAddrValue | read-only | current | The network-layer address of the device SNMP-agent as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX addr… |
| 1.3.6.1.4.1.1991.1.1.3.21 | IdentitysnVsrp | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.1.3.21.1 | NodesnVsrpGlobal | |||
| 1.3.6.1.4.1.1991.1.1.3.21.1.1 | ScalarsnVsrpGroupOperModeVsrp | read-write | current | The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activa… |
| 1.3.6.1.4.1.1991.1.1.3.21.1.2 | ScalarsnVsrpIfStateChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps. |
| 1.3.6.1.4.1.1991.1.1.3.21.1.3 | ScalarsnVsrpIfMaxNumVridPerIntf | read-only | current | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.1991.1.1.3.21.1.4 | ScalarsnVsrpIfMaxNumVridPerSystem | read-only | current | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.1991.1.1.3.21.1.5 | ScalarsnVsrpClearVrrpStat | read-write | current | Clear VSRP statistics command. |
| 1.3.6.1.4.1.1991.1.1.3.21.2 | NodesnVsrpIfIntf | |||
| 1.3.6.1.4.1.1991.1.1.3.21.2.1 | TablesnVsrpIfTable | not-accessible | current | The VSRP Interface Table describes the interfaces from the viewpoint of VSRP. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1 | RowsnVsrpIfEntry | not-accessible | current | The VSRP Interface Entry describes one interface from the viewpoint of VSRP. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1.1 | ColumnsnVsrpIfVlanId | read-only | current | Vlan index. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1.2 | ColumnsnVsrpIfAuthType | read-write | current | The authentication type of this interface. |
| 1.3.6.1.4.1.1991.1.1.3.21.2.1.1.3 | ColumnsnVsrpIfAuthPassword | read-write | current | The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd. |
| 1.3.6.1.4.1.1991.1.1.3.21.3 | NodesnVsrpVirRtr | |||
| 1.3.6.1.4.1.1991.1.1.3.21.3.1 | TablesnVsrpVirRtrTable | not-accessible | current | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1 | RowsnVsrpVirRtrEntry | not-accessible | current | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.1 | ColumnsnVsrpVirRtrVlanId | read-only | current | Vlan index. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.2 | ColumnsnVsrpVirRtrId | read-only | current | One of the virtual router ID of this vsrp interface. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3 | ColumnsnVsrpVirRtrOwnership | read-write | current | The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp ro… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4 | ColumnsnVsrpVirRtrCfgPriority | read-write | current | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5 | ColumnsnVsrpVirRtrTrackPriority | read-write | current | The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6 | ColumnsnVsrpVirRtrCurrPriority | read-only | current | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.7 | ColumnsnVsrpVirRtrHelloInt | read-write | current | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.8 | ColumnsnVsrpVirRtrDeadInt | read-write | current | Dead interval (seconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.9 | ColumnsnVsrpVirRtrPreemptMode | read-write | current | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.10 | ColumnsnVsrpVirRtrState | read-only | current | This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11 | ColumnsnVsrpVirRtrIpAddrMask | read-write | current | The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.12 | ColumnsnVsrpVirRtrActivate | read-write | current | This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13 | ColumnsnVsrpVirRtrTrackPortList | read-write | current | This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecuti… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.14 | ColumnsnVsrpVirRtrAdvertiseBackup | read-write | current | Set Advertise this backup router to master |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.15 | ColumnsnVsrpVirRtrHoldDownInt | read-write | current | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16 | ColumnsnVsrpVirRtrInitTtl | read-write | current | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.17 | ColumnsnVsrpVirRtrIncPortList | read-write | current | Include all free ports of the VLAN into its control ports |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.18 | ColumnsnVsrpVirRtrSave | read-write | current | Set VSRP to save current parameters value |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.19 | ColumnsnVsrpVirRtrBackupInt | read-write | current | Time interval between backup routers hello message advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.20 | ColumnsnVsrpVirRtrRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.21 | ColumnsnVsrpVirRtrRxArpPktDropCnts | read-only | current | The received vsrp ARP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.22 | ColumnsnVsrpVirRtrRxIpPktDropCnts | read-only | current | The received VSRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.23 | ColumnsnVsrpVirRtrRxPortMismatchCnts | read-only | current | The received vsrp Port mismatching Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.24 | ColumnsnVsrpVirRtrRxNumOfIpMismatchCnts | read-only | current | The received VSRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.25 | ColumnsnVsrpVirRtrRxIpMismatchCnts | read-only | current | The received vsrp IP Address mismatching Counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.26 | ColumnsnVsrpVirRtrRxHelloIntMismatchCnts | read-only | current | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.27 | ColumnsnVsrpVirRtrRxPriorityZeroFromMasterCnts | read-only | current | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.28 | ColumnsnVsrpVirRtrRxHigherPriorityCnts | read-only | current | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.29 | ColumnsnVsrpVirRtrTransToMasterStateCnts | read-only | current | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.30 | ColumnsnVsrpVirRtrTransToBackupStateCnts | read-only | current | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.31 | ColumnsnVsrpVirRtrCurrDeadInt | read-only | current | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.32 | ColumnsnVsrpVirRtrCurHelloInt | read-only | current | Set backup router hello interval |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.33 | ColumnsnVsrpVirRtrCurHoldDownInt | read-only | current | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34 | ColumnsnVsrpVirRtrCurInitTtl | read-only | current | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.35 | ColumnsnVsrpVirRtrHelloMacAddress | read-only | current | Hello MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.21.3.1.1.36 | ColumnsnVsrpVirRtrMasterIpAddr | read-only | current | The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router. |
| 1.3.6.1.4.1.1991.1.1.3.22 | NodesnArpInfo | |||
| 1.3.6.1.4.1.1991.1.1.3.23 | IdentitysnWireless | |||
| 1.3.6.1.4.1.1991.1.1.3.23.1 | NodewgGroup | |||
| 1.3.6.1.4.1.1991.1.1.3.23.1.1 | ScalarwgMobilityId | read-write | current | Unique Identifier used to specify the mobility doamin. Valid range is <1 - 65535>. Use <0> to remove the domain. |
| 1.3.6.1.4.1.1991.1.1.3.23.1.2 | ScalarwgVpnPTDeletePolicy | read-write | current | Write a valid VPN pass through policy ID to remove the policy. Return zero when reading this object. |
| 1.3.6.1.4.1.1991.1.1.3.23.2 | TablewgIfTable | not-accessible | current | WiFi Interface Table. |
| 1.3.6.1.4.1.1991.1.1.3.23.2.1 | RowwgIfEntry | not-accessible | current | An entry of the WiFi Interface Table. |
| 1.3.6.1.4.1.1991.1.1.3.23.2.1.1 | ColumnwgIfIndex | read-only | current | ifIndex value of the switch interface. |
| 1.3.6.1.4.1.1991.1.1.3.23.2.1.2 | ColumnwgIfWirelessEnable | read-write | current | Control wireless function of the switch interface. |
| 1.3.6.1.4.1.1991.1.1.3.23.2.1.3 | ColumnwgIfPnPLearnNewAP | read-write | current | Control the interface to learn new AP. |
| 1.3.6.1.4.1.1991.1.1.3.23.2.1.4 | ColumnwgIfAutoPortDisable | read-write | current | Disable the interface if the interface link status change. |
| 1.3.6.1.4.1.1991.1.1.3.23.2.1.5 | ColumnwgIfVpnPTPolicyId | read-write | current | To bind an interface to a VPN pass through policy, write a valid policy number which is larger than zero. To unbind an interface to a VPN pass through policy, … |
| 1.3.6.1.4.1.1991.1.1.3.23.2.1.6 | ColumnwgIfFullCompRoamingEnable | read-write | current | Control full compatibility roaming of an interface. |
| 1.3.6.1.4.1.1991.1.1.3.23.3 | TablewgRoamingPeerTable | not-accessible | current | Roaming Peer table contains information of peers. |
| 1.3.6.1.4.1.1991.1.1.3.23.3.1 | RowwgRoamingPeerEntry | not-accessible | current | An entry of the roaming peer table. |
| 1.3.6.1.4.1.1991.1.1.3.23.3.1.1 | ColumnwgRoamingPeerIpAddress | read-only | current | IP Address of the ISRP peer. |
| 1.3.6.1.4.1.1991.1.1.3.23.3.1.2 | ColumnwgRoamingPeerConnectionStatus | read-only | current | Shows the state of the ISRP Connection. |
| 1.3.6.1.4.1.1991.1.1.3.23.3.1.3 | ColumnwgRoamingPeerRowStatus | read-write | current | Shows the state of the row in the PeerRow Table. |
| 1.3.6.1.4.1.1991.1.1.3.23.4 | TablewgPnPTable | not-accessible | current | AP Plug and Play Table. |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1 | RowwgPnPEntry | not-accessible | current | An entry of the AP Plug and Play Table. |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1.1 | ColumnwgPnPIfIndex | read-only | current | ifIndex value of the switch interface. |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1.2 | ColumnwgPnPMacAddress | read-only | current | MAC address of the attached AP. |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1.3 | ColumnwgPnPIpAddress | read-write | current | IP address of the attached AP. |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1.4 | ColumnwgPnPIpMask | read-write | current | Subnet mask of the attached AP. |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1.5 | ColumnwgPnPIpDefaultGw | read-write | current | Default gateway of the attached AP. |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1.6 | ColumnwgPnPStatus | read-only | current | AP device status. If the switch diecovered a new AP which had not been configured, the 'discovered' state will return. If the AP's IP address, subnet mask and … |
| 1.3.6.1.4.1.1991.1.1.3.23.4.1.7 | ColumnwgPnPRowStatus | read-write | current | Create, delete or modify a row of AP Plug and Play Table. |
| 1.3.6.1.4.1.1991.1.1.3.23.5 | TablewgVpnPTServerTable | not-accessible | current | VPN pass through server table |
| 1.3.6.1.4.1.1991.1.1.3.23.5.1 | RowwgVpnPTServerEntry | not-accessible | current | An entry of the VPN pass through server table. |
| 1.3.6.1.4.1.1991.1.1.3.23.5.1.1 | ColumnwgVpnPTServerPolicyId | read-only | current | VPN pass through policy identifier. It must be greater than zero. |
| 1.3.6.1.4.1.1991.1.1.3.23.5.1.2 | ColumnwgVpnPTServerIpAddress | read-only | current | VPN server IP address. |
| 1.3.6.1.4.1.1991.1.1.3.23.5.1.3 | ColumnwgVpnPTServerRowStatus | read-write | current | Create or delete a row of VPN pass through server table. |
| 1.3.6.1.4.1.1991.1.1.3.23.6 | TablewgVpnPTFilterTable | not-accessible | current | VPN pass through filter table |
| 1.3.6.1.4.1.1991.1.1.3.23.6.1 | RowwgVpnPTFilterEntry | not-accessible | current | An entry of the VPN pass through filter table. |
| 1.3.6.1.4.1.1991.1.1.3.23.6.1.1 | ColumnwgVpnPTFilterPolicyId | read-only | current | VPN pass through policy identifier. It must be greater than zero. |
| 1.3.6.1.4.1.1991.1.1.3.23.6.1.2 | ColumnwgVpnPTFilterProtocol | read-only | current | Allow this type of protocol to pass through. |
| 1.3.6.1.4.1.1991.1.1.3.23.6.1.3 | ColumnwgVpnPTFilterPort | read-only | current | Allow this protocol port to pass through. |
| 1.3.6.1.4.1.1991.1.1.3.23.6.1.4 | ColumnwgVpnPTFilterRowStatus | read-write | current | Create or delete a row of VPN pass through filter table. |
| 1.3.6.1.4.1.1991.1.1.3.23.7 | TablewgVpnPTPolicyTable | not-accessible | current | VPN pass through policy table |
| 1.3.6.1.4.1.1991.1.1.3.23.7.1 | RowwgVpnPTPolicyEntry | not-accessible | current | An entry of the VPN pass through policy table. |
| 1.3.6.1.4.1.1991.1.1.3.23.7.1.1 | ColumnwgVpnPTPolicyId | read-only | current | VPN pass through policy identifier. It must be greater than zero. |
| 1.3.6.1.4.1.1991.1.1.3.23.7.1.2 | ColumnwgVpnPTPolicyPortList | read-only | current | A list of ports bound to this VPN pass through policy. |
| 1.3.6.1.4.1.1991.1.1.3.24 | NodesnMac | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1 | NodesnMacSecurity | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1.1 | NodesnPortMacSecurity | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1 | TablesnPortMacSecurityTable | not-accessible | current | Status of port MAC security on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1 | RowsnPortMacSecurityEntry | not-accessible | current | An entry in the snPortMacSecurityTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.1 | ColumnsnPortMacSecurityIfIndex | read-only | current | ifIndex value of the local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.2 | ColumnsnPortMacSecurityResource | read-only | current | The MAC address was secured using local or shared resources. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.3 | ColumnsnPortMacSecurityQueryIndex | read-only | current | Entry index within the given resource of local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.4 | ColumnsnPortMacSecurityMAC | read-only | current | The secure MAC address for this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.5 | ColumnsnPortMacSecurityAgeLeft | read-only | current | The number of minutes the MAC address will remain secure before being aged out. 0 means no aging. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.6 | ColumnsnPortMacSecurityShutdownStatus | read-only | current | Interface up/down status. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.7 | ColumnsnPortMacSecurityShutdownTimeLeft | read-only | current | If snPortMacSecurityShutdownStatus is up(1), this value will be 0. If snPortMacSecurityShutdownStatus is down(2), this gives the number of seconds before this … |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.8 | ColumnsnPortMacSecurityVlanId | read-only | current | The vlan membership of this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2 | TablesnPortMacSecurityModuleStatTable | not-accessible | current | Port MAC security statistics on each module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1 | RowsnPortMacSecurityModuleStatEntry | not-accessible | current | An entry in the snPortMacSecurityModuleStatTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.1 | ColumnsnPortMacSecurityModuleStatSlotNum | read-only | current | The slot number of the port security device module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.2 | ColumnsnPortMacSecurityModuleStatTotalSecurityPorts | read-only | current | The totol number of Ethernet interfaces on which MAC security is configured in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.3 | ColumnsnPortMacSecurityModuleStatTotalMACs | read-only | current | The totol number of port MAC security MAC addresses are learned or configured in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.4 | ColumnsnPortMacSecurityModuleStatViolationCounts | read-only | current | The totol number of counts of violation are collected in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.5 | ColumnsnPortMacSecurityModuleStatTotalShutdownPorts | read-only | current | The totol number of Ethernet interfaces are shutted down due to security violation in this module. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3 | TablesnPortMacSecurityIntfContentTable | not-accessible | current | Port MAC security statistics on each Ethernet Interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1 | RowsnPortMacSecurityIntfContentEntry | not-accessible | current | An entry in the snPortMacSecurityIntfContentTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.1 | ColumnsnPortMacSecurityIntfContentIfIndex | not-accessible | current | In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2863. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.2 | ColumnsnPortMacSecurityIntfContentSecurity | read-write | current | Port security for this interface can be either disabled or enabled. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.3 | ColumnsnPortMacSecurityIntfContentViolationType | read-write | current | Port security violation type for this interface is shutdown or restrict. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.4 | ColumnsnPortMacSecurityIntfContentShutdownTime | read-write | current | If snPortMacSecurityIntfContentViolationType is shutdown(0), this value gives the number of seconds this interface is shut down when violation occurs. In the s… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.5 | ColumnsnPortMacSecurityIntfContentShutdownTimeLeft | read-only | current | If snPortMacSecurityIntfContentViolationType is shutdown(1), whether this interface has been shut down due to a security violation and the value gives the numb… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.6 | ColumnsnPortMacSecurityIntfContentAgeOutTime | read-write | current | The amount of time, in minutes, MAC addresses learned on this interface will remain secure. It allows configurable values 0-1440. 0 means no aging permanently. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.7 | ColumnsnPortMacSecurityIntfContentMaxLockedMacAllowed | read-write | current | Maximum number of security MAC addresses can be locked to this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.8 | ColumnsnPortMacSecurityIntfContentTotalMACs | read-only | current | The totol number of port MAC security MAC addresses are locked in this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.9 | ColumnsnPortMacSecurityIntfContentViolationCounts | read-only | current | The totol number of counts of violation are collected in this interface. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4 | TablesnPortMacSecurityIntfMacTable | not-accessible | current | Status of port MAC security on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1 | RowsnPortMacSecurityIntfMacEntry | not-accessible | current | An entry in the snPortMacSecurityIntfMacTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.1 | ColumnsnPortMacSecurityIntfMacIfIndex | read-only | current | ifIndex value of the local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.2 | ColumnsnPortMacSecurityIntfMacAddress | read-only | current | The secure MAC address for this local Ethernet interface on which the secure MAC Address is configured and/or learned. The maximum number of the secure MAC Add… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.3 | ColumnsnPortMacSecurityIntfMacVlanId | read-write | current | The vlan membership of this interface, zero means don't care. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.4 | ColumnsnPortMacSecurityIntfMacRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5 | TablesnPortMacSecurityAutosaveMacTable | not-accessible | current | Autosave MAC addresses of port MAC security on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1 | RowsnPortMacSecurityAutosaveMacEntry | not-accessible | current | An entry in the snPortMacSecurityAutosaveMacTable |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.1 | ColumnsnPortMacSecurityAutosaveMacIfIndex | read-only | current | ifIndex value of the local Ethernet interface on which MAC security is configured. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.2 | ColumnsnPortMacSecurityAutosaveMacResource | read-only | current | The MAC address was autosaved using local or shared resources. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.3 | ColumnsnPortMacSecurityAutosaveMacQueryIndex | read-only | current | Entry index within the given resource of local Ethernet interface on which MAC security is autosaved. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.4 | ColumnsnPortMacSecurityAutosaveMacAddress | read-only | current | The secure MAC address for this local Ethernet interface on which the secure MAC Address is autosaved. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.2 | NodesnPortMacGlobalSecurity | |||
| 1.3.6.1.4.1.1991.1.1.3.24.1.2.1 | ScalarsnPortMacGlobalSecurityFeature | read-write | current | Port security for this device can be either disabled or enabled. |
| 1.3.6.1.4.1.1991.1.1.3.24.1.2.2 | ScalarsnPortMacGlobalSecurityAgeOutTime | read-write | current | The amount of time, in minutes, MAC addresses learned on this device will remain secure. It allows configurable values in the range of 0-1440. 0 means no aging… |
| 1.3.6.1.4.1.1991.1.1.3.24.1.2.3 | ScalarsnPortMacGlobalSecurityAutosave | read-write | current | The port security autosave value for this device. It allows configurable values 0 and also in the range of 15-1440. The value 0 means no autosave. |
| 1.3.6.1.4.1.1991.1.1.3.25 | NodesnPortMonitor | |||
| 1.3.6.1.4.1.1991.1.1.3.25.1 | TablesnPortMonitorTable | not-accessible | current | Status of port monitoring on the device's interfaces. |
| 1.3.6.1.4.1.1991.1.1.3.25.1.1 | RowsnPortMonitorEntry | not-accessible | current | An entry in the snPortMonitorTable |
| 1.3.6.1.4.1.1991.1.1.3.25.1.1.1 | ColumnsnPortMonitorIfIndex | not-accessible | current | ifIndex value of the local interface on which monitoring is configuerd. |
| 1.3.6.1.4.1.1991.1.1.3.25.1.1.2 | ColumnsnPortMonitorMirrorList | read-write | current | Lists the monitoring configuration of this port. The value is a space delimited sequence of ifIndex of mirror port and monitor mode. The values for mode can be… |
| 1.3.6.1.4.1.1991.1.1.3.26 | NodesnSSH | |||
| 1.3.6.1.4.1.1991.1.1.3.27 | NodesnSSL | |||
| 1.3.6.1.4.1.1991.1.1.3.28 | NodesnMacAuth | |||
| 1.3.6.1.4.1.1991.1.1.3.31 | IdentitysnStacking | Management Information for stacking system configuration and operational status. Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wi… | ||
| 1.3.6.1.4.1.1991.1.1.3.31.1 | NodesnStackingGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.31.1.1 | ScalarsnStackingGlobalConfigState | read-write | current | Configure stack state for stacking feature on the global level. none: neutral, receive packets only enable: stacking is enable, send and receive packets disabl… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.2 | ScalarsnStackingGlobalMacAddress | read-write | current | Management MAC address of the stacking system. This is available to change management MAC address of stack for administrative purpose. It is strongly recommend… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.3 | ScalarsnStackingGlobalPersistentMacTimerState | read-write | deprecated | Configure persistent MAC timer state for stacking feature on the global level. enable: the persistent MAC timer is active and configured. The persistent MAC ti… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.4 | ScalarsnStackingGlobalPersistentMacTimer | read-write | deprecated | Persistent MAC timer in minutes for the stacking system Number of minutes to retain original active stack unit's base MAC address in event of active unit crash… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.5 | ScalarsnStackingGlobalTopology | read-only | current | The topology of the stacking system |
| 1.3.6.1.4.1.1991.1.1.3.31.1.6 | ScalarsnStackingGlobalMode | read-only | current | The stacking mode of the system. stackingMode: the system has been installed STK EEPROM, and it is in stacking mode. nonStackingMode:the system has not been in… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.7 | ScalarsnStackingGlobalMixedMode | read-only | current | The mixed stacking mode of the system. mixedStackingMode: the system is in a mixed stacking mode (heterogeneous stacking). classicStackingMode: the system is n… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.8 | ScalarsnStackingGlobalMaxUnitNumber | read-only | current | The max number of units in the stacking system. 1 as default value for no-stacking device |
| 1.3.6.1.4.1.1991.1.1.3.31.1.9 | ScalarsnStackingGlobalHighestPriority | read-only | current | The highest stack priority that can be configured in the stacking system. 0 as default value for no-stacking device |
| 1.3.6.1.4.1.1991.1.1.3.31.1.10 | ScalarsnStackingGlobalZeroTouchEnable | read-write | current | Configure Stack Zero Touch feature for a stacking system on the global level. The Zero Touch feature discovers new stack member units, assigns them IDs, define… |
| 1.3.6.1.4.1.1991.1.1.3.31.2 | NodesnStackingTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.31.2.1 | TablesnStackingConfigUnitTable | not-accessible | current | Stacking configuration unit table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1 | RowsnStackingConfigUnitEntry | not-accessible | current | An entry in the stacking configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1 | ColumnsnStackingConfigUnitIndex | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2 | ColumnsnStackingConfigUnitPriority | read-write | current | The priority in Active/backup eclection. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3 | ColumnsnStackingConfigUnitConfigStackPort | read-write | deprecated | The IfIndex for the configured stacking port. If no stacking port is configured, it will be displayed zero and the first two 10G ports as the default stacking … |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4 | ColumnsnStackingConfigUnitRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5 | ColumnsnStackingConfigUnitType | read-only | current | A description of the configured/active system type for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6 | ColumnsnStackingConfigUnitState | read-only | current | A state for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7 | ColumnsnStackingConfigUnitStackPort1 | read-write | current | A stack port for the unit. It returns 0 if stack port does not exist. Entering 0 means to delete this stack port. Note that the maximum stack port on an unit i… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8 | ColumnsnStackingConfigUnitStackPort2 | read-write | current | Other one stack port for the unit. It returns 0 if stack port does not exist. Entering 0 means to delete this stack port. Note that the maximum stack port on a… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.9 | ColumnsnStackingConfigUnitConnectPort1 | read-write | deprecated | First connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are sugges… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.10 | ColumnsnStackingConfigUnitConnectPort2 | read-write | deprecated | second connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are sugge… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.11 | ColumnsnStackingConfigUnitStackTrunk1 | read-write | current | A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NU… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.12 | ColumnsnStackingConfigUnitStackTrunk2 | read-write | current | A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NU… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.13 | ColumnsnStackingConfigUnitName | read-write | current | A name description of stacking unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2 | TablesnStackingOperUnitTable | not-accessible | current | Stacking operation unit table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1 | RowsnStackingOperUnitEntry | not-accessible | current | An entry in the stacking operation table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.1 | ColumnsnStackingOperUnitIndex | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.2 | ColumnsnStackingOperUnitRole | read-only | current | A role for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.3 | ColumnsnStackingOperUnitMac | read-only | current | A MAC address for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.4 | ColumnsnStackingOperUnitPriority | read-only | current | The priority in Active/backup eclection. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.5 | ColumnsnStackingOperUnitState | read-only | current | A state for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.6 | ColumnsnStackingOperUnitDescription | read-only | current | Describes the stacking state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.7 | ColumnsnStackingOperUnitStackPort1 | read-only | current | First stack port for each unit. It returns 0 if stack port does not exist. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.8 | ColumnsnStackingOperUnitStackPort1State | read-only | current | The first stack port state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.9 | ColumnsnStackingOperUnitStackPort2 | read-only | current | Second stack port for each unit. It returns 0 if stack port does not exist. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.10 | ColumnsnStackingOperUnitStackPort2State | read-only | current | The second stack port state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11 | ColumnsnStackingOperUnitNeighbor1 | read-only | current | Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12 | ColumnsnStackingOperUnitNeighbor2 | read-only | current | Stacking neighbor unit (right) number. If there is no neighbor unit, then it returns 0. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.13 | ColumnsnStackingOperUnitImgVer | read-only | current | The version of the running software image |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.14 | ColumnsnStackingOperUnitBuildlVer | read-only | current | The version of the running software build |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3 | TablesnStackingConfigStackTrunkTable | not-accessible | deprecated | Stacking configuration stack trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1 | RowsnStackingConfigStackTrunkEntry | not-accessible | deprecated | An entry in the stacking configuration Stack trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.1 | ColumnsnStackingConfigStackTrunkUnit | not-accessible | deprecated | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.2 | ColumnsnStackingConfigStackTrunkPort1 | not-accessible | deprecated | The IfIndex for the first (primary) port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more tha… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.3 | ColumnsnStackingConfigStackTrunkPort2 | not-accessible | deprecated | The IfIndex for the second port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one log… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.4 | ColumnsnStackingConfigStackTrunkRowStatus | read-write | deprecated | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.5 | ColumnsnStackingConfigStackTrunkNumPort1 | read-only | deprecated | Number of logical ports for the first (primary) port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. … |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.6 | ColumnsnStackingConfigStackTrunkNumPort2 | read-only | deprecated | Number of logical ports for the second port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4 | TablesnStackingConfigPeriPortTable | not-accessible | deprecated | Stacking configuration peripheral port table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1 | RowsnStackingConfigPeriPortEntry | not-accessible | deprecated | An entry in the stacking configuration peripheral port table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.1 | ColumnsnStackingConfigPeriPortUnit | not-accessible | deprecated | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.2 | ColumnsnStackingConfigPeriPortPort | not-accessible | deprecated | The IfIndex for the configured mixed stacking peripheral port. It is up to eight peripheral ports per unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.3 | ColumnsnStackingConfigPeriPortRowStatus | read-write | deprecated | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5 | TablesnStackingConfigPeriTrunkTable | not-accessible | deprecated | Stacking configuration peripheral trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1 | RowsnStackingConfigPeriTrunkEntry | not-accessible | deprecated | An entry in the stacking configuration peripheral trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.1 | ColumnsnStackingConfigPeriTrunkUnit | not-accessible | deprecated | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.2 | ColumnsnStackingConfigPeriTrunkPort1 | not-accessible | deprecated | The IfIndex for the first port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks … |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.3 | ColumnsnStackingConfigPeriTrunkPort2 | not-accessible | deprecated | The IfIndex for the second port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.4 | ColumnsnStackingConfigPeriTrunkRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6 | TablesnStackingNeighborPortTable | not-accessible | current | Stacking neighbor port table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1 | RowsnStackingNeighborPortEntry | not-accessible | current | An entry in the stacking neighborport table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.1 | ColumnsnStackingNeighborPortUnit | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.2 | ColumnsnStackingNeighborPortStackPort | not-accessible | current | The IfIndex for the stack port on this unit. if it is a stack trunk, then this port is the first port of stack trunk. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.3 | ColumnsnStackingNeighborPortNeighborPort | read-only | current | The IfIndex for the neighbor port of the stack port on this unit. if it is a stack trunk, then this port is the first port of stack trunk on the neighbor unit.… |
| 1.3.6.1.4.1.1991.1.1.3.32 | NodefdryMacVlanMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.33 | IdentityfdryLinkAggregationGroupMIB | Management Information Base module for link aggregate group configuration and statistics. Link aggregation group is a new concept of trunk and this MIB is repl… | ||
| 1.3.6.1.4.1.1991.1.1.3.33.1 | NodefdryLinkAggregationGroupTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.33.1.1 | TablefdryLinkAggregationGroupTable | not-accessible | current | LinkAggregationGroup table. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1 | RowfdryLinkAggregationGroupEntry | not-accessible | current | An entry of the Link Aggregate Group table. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.1 | ColumnfdryLinkAggregationGroupName | read-create | current | Name of a LinkAggregationGroup. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.2 | ColumnfdryLinkAggregationGroupType | read-create | current | LinkAggregationGroup type. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.3 | ColumnfdryLinkAggregationGroupAdminStatus | read-create | deprecated | The desired deplyed state of this LinkAggregationGroup entry. This is not the operational status. Refer to ifTable for the operational status. deploy(1).......… |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.4 | ColumnfdryLinkAggregationGroupIfList | read-create | current | A list of interface indices which are the port membership of a trunk group. Each interface index is a 32-bit integer in big endian order. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.5 | ColumnfdryLinkAggregationGroupPrimaryPort | read-create | deprecated | The primary port for the Link Aggregation Group. This must be set before deploying the LinkAggregateGroup unless this is a keepalive LinkAggregateGroup. Zero w… |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.6 | ColumnfdryLinkAggregationGroupTrunkType | read-create | current | The trunk connection type which specifies what the scheme of load-sharing among the trunk ports is. Supported only on SWDR & TNTO platforms. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.7 | ColumnfdryLinkAggregationGroupTrunkThreshold | read-create | current | The number of UP ports needed to keep the trunk up. Not applicable for keepalive LAG. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.8 | ColumnfdryLinkAggregationGroupLacpTimeout | read-create | current | The LACP timeout value this LACP LAG will use. Applicable for dynamic and keepalive LAG only. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.9 | ColumnfdryLinkAggregationGroupIfIndex | read-only | current | After deployment the operation information of a LAG entry will be represented in an entry in ifTable. Use this variable as the ifIndex to access the entry in i… |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.10 | ColumnfdryLinkAggregationGroupPortCount | read-only | current | The number of member ports belong to this LAG. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.11 | ColumnfdryLinkAggregationGroupRowStatus | read-create | current | The status of this conceptual row. Only createAndGo (4) & destroy(6) is supported. To create a row in this table, a manager must set this object to createAndGo… |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.12 | ColumnfdryLinkAggregationGroupId | read-write | current | The numeric identifier assigned to this LAG. |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.13 | ColumnfdryLinkAggregationGroupLacpMode | read-write | current | The LACP mode value this LAG will use. Applicable for dynamic and keepalive LAG only. 0- lacp mode not supported 1- lacp mode active 2- lacp mode passive for s… |
| 1.3.6.1.4.1.1991.1.1.3.33.1.1.1.14 | ColumnfdryLinkAggregationGroupLagMac | read-write | current | MAC Address assigned for LAG interface. Format of mac address will be HHHH.HHHH.HHHH. |
| 1.3.6.1.4.1.1991.1.1.3.33.2 | NodefdryLinkAggregationGroupPortTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.33.2.1 | TablefdryLinkAggregationGroupPortTable | not-accessible | deprecated | A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table … |
| 1.3.6.1.4.1.1991.1.1.3.33.2.1.1 | RowfdryLinkAggregationGroupPortEntry | not-accessible | deprecated | An entry of the Link Aggregate Group Port table. |
| 1.3.6.1.4.1.1991.1.1.3.33.2.1.1.1 | ColumnfdryLinkAggregationGroupPortLacpPriority | read-write | deprecated | The LACP priority value assigned to this link aggregation port. Applicable for dynamic and keepalive LAG only. |
| 1.3.6.1.4.1.1991.1.1.3.33.3 | NodefdryLinkAggregationGroupLacpPortTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.33.3.1 | TablefdryLinkAggregationGroupLacpPortTable | not-accessible | current | A table that contains Link Aggregation Control information about every LACP port associated with this device. A row appears in this table for each physical por… |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1 | RowfdryLinkAggregationGroupLacpPortEntry | not-accessible | current | An entry of the Link Aggregate Group LACP Port table. Applicable for dynamic and keepalive LAG only. |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1.1 | ColumnfdryLinkAggregationGroupLacpPortAdminStatus | read-only | current | The current admin state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1.2 | ColumnfdryLinkAggregationGroupLacpPortLinkStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1.3 | ColumnfdryLinkAggregationGroupLacpPortLacpStatus | read-only | current | The current LACP state of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1.4 | ColumnfdryLinkAggregationGroupLacpPortLacpSysID | read-only | current | The LACP system ID of the LAG. |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1.5 | ColumnfdryLinkAggregationGroupLacpPortLacpKey | read-only | current | The LACP key ID of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1.6 | ColumnfdryLinkAggregationGroupLacpPortLacpRemoteSysID | read-only | current | The LACP remote system ID of the LAG. |
| 1.3.6.1.4.1.1991.1.1.3.33.3.1.1.7 | ColumnfdryLinkAggregationGroupLacpPortLacpRemoteKey | read-only | current | The LACP remote key ID of the interface. |
| 1.3.6.1.4.1.1991.1.1.3.35 | IdentityfdryDaiMIB | Management Information for configuration of Dynamic ARP Inspection feature. Dynamic ARP Inspection is a security mechanism which validates all ARP packets in a… | ||
| 1.3.6.1.4.1.1991.1.1.3.35.1 | NodefdryDaiVlan | |||
| 1.3.6.1.4.1.1991.1.1.3.35.1.1 | TablefdryDaiVlanConfigTable | not-accessible | current | A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of t… |
| 1.3.6.1.4.1.1991.1.1.3.35.1.1.1 | RowfdryDaiVlanConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable Dynamic ARP Inspection at the existing VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.35.1.1.1.1 | ColumnfdryDaiVlanVLanId | not-accessible | current | This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured. |
| 1.3.6.1.4.1.1991.1.1.3.35.1.1.1.2 | ColumnfdryDaiVlanDynArpInspEnable | read-write | current | This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this objec… |
| 1.3.6.1.4.1.1991.1.1.3.35.2 | NodefdryDaiInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.35.2.1 | TablefdryDaiIfConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface. |
| 1.3.6.1.4.1.1991.1.1.3.35.2.1.1 | RowfdryDaiIfConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable trust state for Dynamic ARP Inspection at each physical interface capable of this feature. |
| 1.3.6.1.4.1.1991.1.1.3.35.2.1.1.1 | ColumnfdryDaiIfTrustValue | read-write | current | This object indicates whether the interface is trusted for Dynamic ARP Inspection. If this object is set to 'true', the interface is trusted. ARP packets comin… |
| 1.3.6.1.4.1.1991.1.1.3.35.3 | NodefdryDaiArpInspect | |||
| 1.3.6.1.4.1.1991.1.1.3.35.3.1 | TablefdryDaiArpInspectTable | not-accessible | current | A table provides the mechanism to control Dynamic ARP Inspection entries. When an IP-MAC mapping entry is created in a device supporting this table, a correspo… |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1 | RowfdryDaiArpInspectEntry | not-accessible | current | A row instance contains the configuration to map a device IP address with its MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1.1 | ColumnfdryDaiArpInspectIpAddr | not-accessible | current | The device IP address. |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1.2 | ColumnfdryDaiArpInspectMacAddr | read-create | current | The device MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1.3 | ColumnfdryDaiArpInspectRowStatus | read-create | current | This variable is used to create, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except t… |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1.4 | ColumnfdryDaiArpInspectType | read-only | current | The type of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1.5 | ColumnfdryDaiArpInspectState | read-only | current | The state of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1.6 | ColumnfdryDaiArpInspectAge | read-only | current | The timer of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.35.3.1.1.7 | ColumnfdryDaiArpInspectPort | read-only | current | The port of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.36 | IdentityfdryDhcpSnoopMIB | Management Information for configuration of DHCP Snooping feature. DHCP Snooping is a security feature which enables the device to filter untrusted DHCP packet… | ||
| 1.3.6.1.4.1.1991.1.1.3.36.1 | NodefdryDhcpSnoopGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.36.1.1 | ScalarfdryDhcpSnoopGlobalClearOper | read-write | current | valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears all entries in the DHCP binding databa… |
| 1.3.6.1.4.1.1991.1.1.3.36.2 | NodefdryDhcpSnoopVlan | |||
| 1.3.6.1.4.1.1991.1.1.3.36.2.1 | TablefdryDhcpSnoopVlanConfigTable | not-accessible | current | A table provides the mechanism to control DHCP Snooping per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table… |
| 1.3.6.1.4.1.1991.1.1.3.36.2.1.1 | RowfdryDhcpSnoopVlanConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable DHCP Snooping at the existing VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.36.2.1.1.1 | ColumnfdryDhcpSnoopVlanVLanId | not-accessible | current | This object indicates the VLAN number on which DHCP Snooping feature is configured. |
| 1.3.6.1.4.1.1991.1.1.3.36.2.1.1.2 | ColumnfdryDhcpSnoopVlanDhcpSnoopEnable | read-write | current | This object indicates whether DHCP Snooping is enabled in this VLAN. If this object is set to 'true', DHCP Snooping is enabled. If this object is set to 'false… |
| 1.3.6.1.4.1.1991.1.1.3.36.3 | NodefdryDhcpSnoopInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.36.3.1 | TablefdryDhcpSnoopIfConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state for DHCP Snooping purpose at each physical interface. |
| 1.3.6.1.4.1.1991.1.1.3.36.3.1.1 | RowfdryDhcpSnoopIfConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable trust state for DHCP Snooping at each physical interface capable of this feature. |
| 1.3.6.1.4.1.1991.1.1.3.36.3.1.1.1 | ColumnfdryDhcpSnoopIfTrustValue | read-write | current | This object indicates whether the interface is trusted for DHCP Snooping. If this object is set to 'true', the interface is trusted. DHCP packets coming to thi… |
| 1.3.6.1.4.1.1991.1.1.3.36.4 | NodefdryDhcpSnoopBind | |||
| 1.3.6.1.4.1.1991.1.1.3.36.4.1 | TablefdryDhcpSnoopBindTable | not-accessible | obsolete | A table provides the information of DHCP snooping binding database learnt by the device |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1 | RowfdryDhcpSnoopBindEntry | not-accessible | obsolete | A row instance contains the information of DHCP snoonping entry. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1.1 | ColumnfdryDhcpSnoopBindIpAddr | not-accessible | obsolete | The device IP address. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1.2 | ColumnfdryDhcpSnoopBindMacAddr | read-only | obsolete | The device MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1.3 | ColumnfdryDhcpSnoopBindType | read-only | obsolete | The type of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1.4 | ColumnfdryDhcpSnoopBindState | read-only | obsolete | The state of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1.5 | ColumnfdryDhcpSnoopBindPort | read-only | obsolete | The port of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1.6 | ColumnfdryDhcpSnoopBindVlanId | read-only | obsolete | This object indicates the VLAN number on which DHCP snooping feature is configured. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.1.1.7 | ColumnfdryDhcpSnoopBindClearOper | read-write | obsolete | valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears this entry in the DHCP binding databas… |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2 | TablefdryDhcpSnoopBind2Table | not-accessible | current | A table provides the information of DHCP snooping binding database learnt by the device |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1 | RowfdryDhcpSnoopBind2Entry | not-accessible | current | A row instance contains the information of DHCP snoonping entry. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1.1 | ColumnfdryDhcpSnoopBind2MacAddr | not-accessible | current | The device MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1.2 | ColumnfdryDhcpSnoopBind2VlanId | not-accessible | current | This object indicates the VLAN number on which DHCP snooping feature is configured. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1.3 | ColumnfdryDhcpSnoopBind2IpAddr | read-only | current | The device IP address. |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1.4 | ColumnfdryDhcpSnoopBind2Type | read-only | current | The type of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1.5 | ColumnfdryDhcpSnoopBind2State | read-only | current | The state of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1.6 | ColumnfdryDhcpSnoopBind2Port | read-only | current | The port of the ARP entry |
| 1.3.6.1.4.1.1991.1.1.3.36.4.2.1.7 | ColumnfdryDhcpSnoopBind2ClearOper | read-write | current | valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears this entry in the DHCP binding databas… |
| 1.3.6.1.4.1.1991.1.1.3.37 | IdentityfdryIpSrcGuardMIB | Management Information for configuration of IP Source Guard feature. IP Source Guard is a security feature that restricts IP traffic on untrusted ports by filt… | ||
| 1.3.6.1.4.1.1991.1.1.3.37.1 | NodefdryIpSrcGuardInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.37.1.1 | TablefdryIpSrcGuardIfConfigTable | not-accessible | current | A table provides the mechanism to configure enabling or disabling IP Source Guard purpose at each physical interface. |
| 1.3.6.1.4.1.1991.1.1.3.37.1.1.1 | RowfdryIpSrcGuardIfConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable IP Source Guard at each physical interface capable of this feature. |
| 1.3.6.1.4.1.1991.1.1.3.37.1.1.1.1 | ColumnfdryIpSrcGuardIfEnable | read-write | current | This object indicates whether IP Source Guard is enabled at this interface. If this object is set to 'true', IP Source Guard is enabled. Traffic coming to this… |
| 1.3.6.1.4.1.1991.1.1.3.37.2 | NodefdryIpSrcGuardPortVlan | |||
| 1.3.6.1.4.1.1991.1.1.3.37.2.1 | TablefdryIpSrcGuardPortVlanConfigTable | not-accessible | current | A table provides the mechanism to configure enabling or disabling IP Source Guard purpose per port per VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.37.2.1.1 | RowfdryIpSrcGuardPortVlanConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable IP Source Guard per port per VLAN of this feature. |
| 1.3.6.1.4.1.1991.1.1.3.37.2.1.1.1 | ColumnfdryIpSrcGuardPortVlanPortId | not-accessible | current | The ifIndex of the port for IP Source Guard purpose per port per VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.37.2.1.1.2 | ColumnfdryIpSrcGuardPortVlanVlanId | not-accessible | current | The number of VLAN for IP Source Guard purpose per port per VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.37.2.1.1.3 | ColumnfdryIpSrcGuardPortVlanEnable | read-write | current | This object indicates whether IP Source Guard is enabled at this interface and this VLAN number. If this object is set to 'true', IP Source Guard per-port-per-… |
| 1.3.6.1.4.1.1991.1.1.3.37.3 | NodefdryIpSrcGuardBind | |||
| 1.3.6.1.4.1.1991.1.1.3.37.3.1 | TablefdryIpSrcGuardBindTable | not-accessible | current | A table provides the information of IP addresses used IP Source Guard purpose at each physical interface with or without specific VLAN memberships |
| 1.3.6.1.4.1.1991.1.1.3.37.3.1.1 | RowfdryIpSrcGuardBindEntry | not-accessible | current | A row instance contains IP address used for IP Source Guard purpose at each physical interface with or without specific VLAN memberships . |
| 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.1 | ColumnfdryIpSrcGuardBindIpAddr | not-accessible | current | The device IP address. |
| 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.2 | ColumnfdryIpSrcGuardBindVlanId | read-create | current | This object indicates the specific VLAN memberships on this interface. The VLAN number is optional. If you configure a VLAN number, the bindings applies to tha… |
| 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.3 | ColumnfdryIpSrcGuardBindRowStatus | read-create | current | This variable is used to create, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except t… |
| 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.4 | ColumnfdryIpSrcGuardBindMode | read-only | current | The mode of the IP Source Guard entry |
| 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.5 | ColumnfdryIpSrcGuardBindType | read-only | current | The type of the IP Source Guard entry |
| 1.3.6.1.4.1.1991.1.1.3.39 | NodebrcdRouteMap | |||
| 1.3.6.1.4.1.1991.1.1.3.40 | NodebrcdSPXMIB | |||
| 1.3.6.1.4.1.1991.1.1.3.41 | IdentitybrcdStackISSUMIB | Management Information for Stack ISSU configuration and operational status. Supported Platforms: - supported on Ruckus Wireless ICX platforms. Copyright 1996-2… | ||
| 1.3.6.1.4.1.1991.1.1.3.41.1 | NodebrcdStackISSUGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.41.1.1 | ScalarbrcdStackISSUGlobalUpgradeOption | read-write | current | User configures the system upgrade option to initiate stack upgrade process using primary or secondary image. The set operation is allowed only on the active u… |
| 1.3.6.1.4.1.1991.1.1.3.41.1.2 | ScalarbrcdStackISSUGlobalUpgradeStatus | read-only | current | The state of upgrade process for a stacking or SPX system The default state is in notUpgrading state |
| 1.3.6.1.4.1.1991.1.1.3.41.1.3 | ScalarbrcdStackISSUGlobalUpgradeSystemReady | read-only | current | The per-upgrade state of a stacking or SPX system. The system must be in ready state before the upgrade process starts. It checks the following aspects: Topolo… |
| 1.3.6.1.4.1.1991.1.1.3.41.1.4 | ScalarbrcdStackISSUGlobalUpgradeError | read-only | current | The error message of system upgrade process on a stacking or SPX system. The default is null string, which means system has no error or is in no-upgrade state |
| 1.3.6.1.4.1.1991.1.1.3.41.2 | NodebrcdStackISSUTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.41.2.1 | TablebrcdStackISSUStatusUnitTable | not-accessible | current | Stack ISSU status unit table. |
| 1.3.6.1.4.1.1991.1.1.3.41.2.1.1 | RowbrcdStackISSUStatusUnitEntry | not-accessible | current | An entry in the stack ISSU status table. |
| 1.3.6.1.4.1.1991.1.1.3.41.2.1.1.1 | ColumnbrcdStackISSUStatusUnitIndex | not-accessible | current | The unit Id. If it is a SPX system, CB unit ID is from 1 to 16. PE unit ID is from 17 to 56 |
| 1.3.6.1.4.1.1991.1.1.3.41.2.1.1.2 | ColumnbrcdStackISSUStatusUnitSequence | read-only | current | The sequence of upgrade in a stacking or SPX system. if unit is PE, the sequence number is the same as attached to the CB unit in a SPX system. The default is … |
| 1.3.6.1.4.1.1991.1.1.3.41.2.1.1.3 | ColumnbrcdStackISSUStatusUnitType | read-only | current | A description of the system type for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.41.2.1.1.4 | ColumnbrcdStackISSUStatusUnitRole | read-only | current | A role for each unit |
| 1.3.6.1.4.1.1991.1.1.3.41.2.1.1.5 | ColumnbrcdStackISSUStatusUnitStatus | read-only | current | The status of upgrade for each unit. The default is in notUpgraded state |
| 1.3.6.1.4.1.1991.1.1.3.42 | IdentitysnDhcpServer | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.1.3.42.1 | NodesnDhcpServerGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.42.1.1 | ScalarsnDhcpServerGlobalConfigState | read-write | current | Configure state for DHCPv4 server on the global level. enabled: DHCPv4 server is enabled disabled: DHCPv4 server is disabled Note: DHCPv4 client should be disa… |
| 1.3.6.1.4.1.1991.1.1.3.42.2 | NodesnDhcpServerTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.42.2.1 | TablesnDhcpServerPoolConfigTable | not-accessible | current | A table containing the configurations of dhcp server global pools. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1 | RowsnDhcpServerPoolConfigEntry | not-accessible | current | An entry containing the objects for configuring the network ip or host ip etc. to global pools for DHCP server. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.1 | ColumnsnDhcpServerPoolName | not-accessible | current | DHCP server global pool name. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.2 | ColumnsnDhcpServerPoolNetwork | read-write | current | Network ip of a DHCP global pool. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.3 | ColumnsnDhcpServerPoolNetworkMask | read-write | current | Net mask of a DHCP global pool(network). |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.4 | ColumnsnDhcpServerPoolStartAddr | read-write | current | Start IP of a DHCP global pool. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.5 | ColumnsnDhcpServerPoolEndAddr | read-write | current | End ip of a DHCP global pool. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.6 | ColumnsnDhcpServerPoolLeaseDay | read-write | current | Number of days of the lease. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.7 | ColumnsnDhcpServerPoolLeaseHour | read-write | current | Number of hours of the lease. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.8 | ColumnsnDhcpServerPoolLeaseMinute | read-write | current | Number of minutes of the lease. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.9 | ColumnsnDhcpServerPoolDeploy | read-write | current | Flag of undo operation for DHCPSrvGlobalPoolConfigTable. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.1.1.10 | ColumnsnDhcpServerPoolRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2 | TablesnDhcpServerPoolOptionConfigTable | not-accessible | current | A table for configuring options to DHCP global pools. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1 | RowsnDhcpServerPoolOptionConfigEntry | not-accessible | current | An entry containing the objects for configuring options to DHCP global pools. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.1 | ColumnsnDhcpServerPoolOptionCode | not-accessible | current | Option code. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.2 | ColumnsnDhcpServerPoolOptionType | read-create | current | Option type. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.3 | ColumnsnDhcpServerPoolOptionAscii | read-create | current | Ascii string of an option. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.4 | ColumnsnDhcpServerPoolOptionHexString | read-create | current | Hex string of an option. 1st to 16th hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the form… |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.5 | ColumnsnDhcpServerPoolOptionIPString | read-create | current | Ip string of an option. 1 to 3 ip addresses can be configured at most simultaneously. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.6 | ColumnsnDhcpServerPoolOptionRowStatus | read-create | current | RowStatus. Three actions are used: active, createAndGo, destroy. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.7 | ColumnsnDhcpServerPoolOptionBoolString | read-create | current | Bool string of an option. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.8 | ColumnsnDhcpServerPoolOptionIntString | read-create | current | Int string of an option |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.9 | ColumnsnDhcpServerPoolOptionIPAddrPairString | read-create | current | Ip address pair (ip address & mask) string of option policy-filter(21).Two sets of destination address and subnet mask can be configured at most simultaneously. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.10 | ColumnsnDhcpServerPoolOptionStaticRouteString | read-create | current | Ip address pair (detination & route) string of option static-route(33). Two sets of destination address and static route of the destination address can be conf… |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.11 | ColumnsnDhcpServerPoolOptionSlpDirAgentString | read-create | current | This option specifies the location of one or more SLP Directory Agents. The SLP Directory Agent Option specifies a list of IP addresses for Directory Agents. D… |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.12 | ColumnsnDhcpServerPoolOptionSlpSrvScopeString | read-create | current | The scope list is a comma delimited list which indicates the scopes that a SLP Agent is configured to use. The first byte determines (0 or 1) whether SLP Agent… |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.13 | ColumnsnDhcpServerPoolOptionPxeIntfIdString | read-create | current | The object refers the value of PXE interface Id value. First Octet encodes a network interface type. For now the only supported value is 1 for Universal Networ… |
| 1.3.6.1.4.1.1991.1.1.3.42.2.2.1.14 | ColumnsnDhcpServerPoolOptionPxeClientIdString | read-create | current | The object refers the value of PXE client id string. First byte describes the type of the machine identifier in the remaining octets in this option. 0 (zero) i… |
| 1.3.6.1.4.1.1991.1.1.3.42.2.3 | TablesnDhcpServerPoolExcludedSingleAddressTable | not-accessible | current | A table for configuring single excluded address to DHCP server address pools. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.3.1 | RowsnDhcpServerPoolExcludedSingleAddressEntry | not-accessible | current | An entry containing the objects for configuring single excluded address to DHCP server address pools. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.3.1.1 | ColumnsnDhcpServerPoolExcludedAddressIndex | not-accessible | current | Excluded Address Index. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.3.1.2 | ColumnsnDhcpServerPoolExcludedSingleAddress | read-create | current | Single address excluded from the address pool. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.3.1.3 | ColumnsnDhcpServerPoolExcludedSingleAddressRowStatus | read-create | current | RowStatus. Three actions are used: active, createAndGo, destroy. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.4 | TablesnDhcpServerPoolExcludedAddressRangeTable | not-accessible | current | A table for configuring excluded address range to DHCP server address pools. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.4.1 | RowsnDhcpServerPoolExcludedAddressRangeEntry | not-accessible | current | An entry containing the objects for configuring excluded address and excluded address range to DHCP server address pools. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.4.1.1 | ColumnsnDhcpServerPoolExcludedAddressRangeIndex | not-accessible | current | Excluded address range index. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.4.1.2 | ColumnsnDhcpServerPoolExcludedStartAddress | read-create | current | Start addresses of the excluded from the address pool. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.4.1.3 | ColumnsnDhcpServerPoolExcludedEndAddress | read-create | current | End addresses of the excluded from the address pool. |
| 1.3.6.1.4.1.1991.1.1.3.42.2.4.1.4 | ColumnsnDhcpServerPoolExcludedAddressRowStatus | read-create | current | RowStatus. Three actions are used: active, createAndGo, destroy. |
| 1.3.6.1.4.1.1991.1.1.3.43 | IdentityruckusWiredClientMIB | Management Information for discovering/querying the directly connected clients of Ruckus ICX Switches/Routers. The information consists of: 1. Device MAC/IPv4/… | ||
| 1.3.6.1.4.1.1991.1.1.3.43.0 | NoderuckusWiredClientNotify | |||
| 1.3.6.1.4.1.1991.1.1.3.43.0.1 | NotificationruckusWiredClientConnectedNotify | current | This notification is sent if a client is detected and/or authenticated. | |
| 1.3.6.1.4.1.1991.1.1.3.43.0.2 | NotificationruckusWiredClientDisconnectedNotify | current | This notification is sent if client is deleted for reasons such as log-off or inactivity. | |
| 1.3.6.1.4.1.1991.1.1.3.43.1 | NoderuckusWiredClientObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.43.1.1 | NoderuckusWiredClients | |||
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1 | TableruckusWiredClientsTable | not-accessible | current | A table providing information about the clients directly connected on all the ports in the Ruckus devices. When FlexAuth is enabled, this table contains entrie… |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1 | RowruckusWiredClientEntry | not-accessible | current | An entry containing information about a specific client on a given port |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.1 | ColumnruckusWiredClientMac | read-only | current | Specifies the MAC Address of the client (device/host) represented by this client entry |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.2 | ColumnruckusWiredClientVlan | read-only | current | Specifies the VLAN, the client (device/host) belongs to, represented by this client entry. In case of voice-phones, this VLAN is the voice-VLAN (tagged) and in… |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.3 | ColumnruckusWiredClientType | read-only | current | Decribes the type of the client connnected on this port |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.4 | ColumnruckusWiredClientAuthType | read-only | current | Specifies the authentication method that is used for authenticating the client on this port represented by this client (when FlexAuth is enabled). Otherwise, i… |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.5 | ColumnruckusWiredClientStatus | read-only | current | The authentication state of the client which can take the following values. noAuth - not authenticated allowed - client authentication is successful, so the co… |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.6 | ColumnruckusWiredClientDescr | read-only | current | Desribes the client as derived from LLDP/CDP device description for LLDP/CDP learned devices. Otherwise it's an empty string for now. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.7 | ColumnruckusWiredClientUserName | read-only | current | Specified the User name associated with the client, represented by this entry. It coule be username or MAC address, where user-name is not present and not appl… |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.8 | ColumnruckusWiredClientV4Addr | read-only | current | The IPv4 address of the client represented by this entry. A client can have both IPv4 and IPv6 addresses bound on dual-stack hosts. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.9 | ColumnruckusWiredClientV6Addr | read-only | current | The IPv6 address of the client represented by this entry. A client can have both IPv4 and IPv6 addresses bound on dual-stack hosts. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.10 | ColumnruckusWiredClientUpTime | read-only | current | Specifies the time the client had been up from the time the client entry is created in the Ruckus device. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.11 | ColumnruckusWiredClientTxPkts | read-only | current | The total number of packets transmitted on this port for this client. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.12 | ColumnruckusWiredClientRxPkts | read-only | current | The total number of packets received on this port for this client. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.13 | ColumnruckusWiredClientTxOctets | read-only | current | The total number of octets transmitted on this port for this client. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.14 | ColumnruckusWiredClientRxOctets | read-only | current | The total number of octets receivedon this port for this client. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.15 | ColumnruckusDhcpClientHostName | read-only | current | Specified the Host name associated with the client, represented by this entry. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.16 | ColumnruckusDhcpClientDeviceTypeName | read-only | current | Specified the Device type name (mobile,laptop) associated with the client, represented by this entry. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.17 | ColumnruckusDhcpClientOsVendorName | read-only | current | Specified the OS vendor name associated with the client, represented by this entry. |
| 1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.18 | ColumnruckusDhcpClientModelName | read-only | current | Specified the Device mode name associated with the client, represented by this entry. |
| 1.3.6.1.4.1.1991.1.1.3.43.2 | NoderuckusWiredClientConformance | |||
| 1.3.6.1.4.1.1991.1.1.3.43.2.1 | NoderuckusWiredClientMIBCompliances | |||
| 1.3.6.1.4.1.1991.1.1.3.43.2.1.1 | ComplianceruckusWiredClientCompliance | current | The compliance statement for entities which implement RUCKUS-CLIENT-MIB. | |
| 1.3.6.1.4.1.1991.1.1.3.43.2.2 | NoderuckusWiredClientMIBGroups | |||
| 1.3.6.1.4.1.1991.1.1.3.43.2.2.1 | GroupruckusWiredClientGroup | current | A collection of objects that provide client information for a specific client. | |
| 1.3.6.1.4.1.1991.1.1.3.44 | IdentityruckusAuthMIB | Management Information for configuration/querying of Flexible authentication which consists of 802.1X, MAC-Auth and Web-Auth. It is grouped into five MIBs - 1.… | ||
| 1.3.6.1.4.1.1991.1.1.3.44.0 | NoderuckusAuthNotification | |||
| 1.3.6.1.4.1.1991.1.1.3.44.0.1 | NotificationruckusAuthPortAuthorizedNotif | current | This notification is sent if a 802.1x supplicant is detected and authenticated successfully with supplicant getting assigned a VLAN. | |
| 1.3.6.1.4.1.1991.1.1.3.44.0.2 | NotificationruckusAuthPortUnauthorizedNotif | current | This notification is sent if a 802.1x supplicant had logged off or session is cleared for other reasons. | |
| 1.3.6.1.4.1.1991.1.1.3.44.0.3 | NotificationruckusAuthMacAuthorizedNotif | current | This notification is sent if a non-802.1x client is detected and authenticated successfully with client/device getting assigned a VLAN. | |
| 1.3.6.1.4.1.1991.1.1.3.44.0.4 | NotificationruckusAuthMacUnauthorizedNotif | current | This notification is sent if a non-802.1x client had logged off or session is cleared for other reasons. | |
| 1.3.6.1.4.1.1991.1.1.3.44.0.5 | NotificationruckusAuthAclFailNotif | current | This notification is sent if a an ACL counldn't be applied for authenticated client, resulting the client in authentication failure. | |
| 1.3.6.1.4.1.1991.1.1.3.44.1 | NoderuckusAuthObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.1 | NoderuckusAuthConfig | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.1 | ScalarruckusAuthDefaultVlan | read-only | current | This default VLAN is used to place all the FlexAuth enabled ports, so this VLAN acts as a VLAN for the clients to belong to, when authentication server doesn't… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.2 | ScalarruckusAuthVoiceVlan | read-only | current | This voice VLAN is used to advertise through LLDP/CDP on the ports, when connected devices are detected as Phones and authentication server doesn't assign any … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.3 | ScalarruckusAuthCriticalVlan | read-only | current | This VLAN is used to place the clients, when the authentication server times out and the timeout action is configired as 'critical', so the clients have limite… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.4 | ScalarruckusAuthRestrictVlan | read-only | current | This VLAN is used to place the clients, when the clients fail the authentication and the failure action is configured as 'restrict', so the clients have limite… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.5 | ScalarruckusAuthEnable | read-only | current | Specifies, which authentication methods are enabled globally. Unless the method is enabled globally, the same can't be enabled at port level. A bit field of '1… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.6 | ScalarruckusAuthMode | read-only | current | Specifies the authentication mode for all the FlexAuth enabled ports. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.7 | ScalarruckusAuthMethods | read-only | current | Specifies which authentication methods to be attempted in series of methods for all FlexAuth enabled ports. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.8 | ScalarruckusAuthMaxSessions | read-only | current | Specifies the maximum number of authenticated clients allowed on a port. This doesn't include the clients allowed due to authentication failure and timeout pol… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.9 | ScalarruckusAuthFailAction | read-only | current | Specifies the action to be taken, when the clients fail the authentication. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.10 | ScalarruckusAuthTimeoutAction | read-only | current | Specifies the action to be taken, when the authentication server times out. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.11 | ScalarruckusAuthReauthEnable | read-only | current | The reauthentication control for all the FlexAuth enabled ports. Setting this object to 'enabled' causes every FlexAuth enabled port to reauthenticate the devi… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.12 | ScalarruckusAuthReauthPeriod | read-only | current | How often to re-authenticates clients, when periodic re-authentication is enabled. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.13 | ScalarruckusAuthReauthTimeout | read-only | current | How often to re-authenticates clients, when the clients were allowed due to authentication server timeout. Value of 0 disables the re-authentication. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.14 | ScalarruckusAuthIdleTimeout | read-only | current | Specifies the time to keep the sessions in the Ruckus device, after the inactivity detection time expired in the hardware. If the clients start the traffic in … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.15 | ScalarruckusAuthDeniedTimeout | read-only | current | Specifies the time to keep the denied sessions in the Ruckus device for the clients which are blocked as they failed authentication. When the clients start the… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.16 | ScalarruckusAuthAging | read-only | current | Specifies, if denied and permitted sessions are enabled or disabled for aging. Aging is enabled by default. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.17 | ScalarruckusAuthDefaultV4IngressAcl | read-only | current | Specifies the default User Access List (ACL) applied in the Ingress direction for the IPv4 traffic for sessins when ACLs are not dynamically assigned through R… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.18 | ScalarruckusAuthDefaultV4EgressAcl | read-only | current | Specifies the default User Access List (ACL) applied in the Egress direction for the IPv4 traffic for sessins when ACLs are not dynamically assigned through RA… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.19 | ScalarruckusAuthDefaultV6IngressAcl | read-only | current | Specifies the default User Access List (ACL) applied in the Ingress direction for the IPv6 traffic for sessins when ACLs are not dynamically assigned through R… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.1.20 | ScalarruckusAuthDefaultV6EgressAcl | read-only | current | Specifies the default User Access List (ACL) applied in the Egress direction for the IPv6 traffic for sessins when ACLs are not dynamically assigned through RA… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.2 | NoderuckusDot1xAuthConfig | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.2.1 | ScalarruckusDot1xQuietPeriod | read-only | current | When the Ruckus device is unable to authenticate the Client, the amount of time the Ruckus device waits before trying again. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.2.2 | ScalarruckusDot1xTxPeriod | read-only | current | When a Client does not send back an EAP(Extensible Authentication Protocol)- response/identity frame, the amount of time the Ruckus device waits before retrans… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.2.3 | ScalarruckusDot1xSuppTimeout | read-only | current | When a supplicant (Client) does not respond to an EAP-request frame, the amount of time before the Ruckus device retransmits the frame. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.2.4 | ScalarruckusDot1xMaxReq | read-only | current | The number of times the Ruckus device retransmits an EAP-request/identity request frame if it does not receive an EAP-response/identity response frame from the… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.2.5 | ScalarruckusDot1xMaxReauthReq | read-only | current | The number of re-authentication attempts that are permitted before the port becomes Unauthorized. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.2.6 | ScalarruckusDot1xGuestVlan | read-only | current | This VLAN is used to place the clients, when the supplicant/client times out as it's not capable of IEEE-802.1X authentication protocol. A value of zero for th… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.2.7 | ScalarruckusDot1xMacAuthOverride | read-only | current | Specifies if the MAC-Authentication should be tried next when a client fails authentication with Dot1x authentication method. This may be required when devices… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.3 | NoderuckusMacAuthConfig | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.3.1 | ScalarruckusMacAuthPasswordFormat | read-only | current | Specifies the format to be used for MAC address, which is used as credential in MAC-authentication. As MAC addresses are represented in different formats, all … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.3.2 | ScalarruckusMacAuthPasswordOverride | read-only | current | Specifies the password to be used for all MAC- authentication clients. This is normally of 0 length string, which means the client MAC address is used as the p… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.3.3 | ScalarruckusMacAuthDot1xOverride | read-only | current | Specifies if the Dot1x should be tried next when a client fails authentication with MAC-Authentication method. This may be required when devices are Dot1x capa… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.3.4 | ScalarruckusMacAuthDot1xEnable | read-only | current | Specifies if the Dot1x should be tried next when a client succeeds authentication with MAC-Authentication method. This may be required when devices are not Dot… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4 | NoderuckusWebAuthConfig | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1 | TableruckusWebAuthTable | not-accessible | current | A table that allows configuration of WebAuth for a specified VLAN. WebAuth is configured at the VLAN level unlike MAC-Auth and Dot1x at the port level. An entr… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1 | RowruckusWebAuthEntry | not-accessible | current | An entry of WebAuth configuration. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.1 | ColumnruckusWebAuthVlan | not-accessible | current | Specifies the VLAN, this configuration entry applies to. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.2 | ColumnruckusWebAuthEnable | read-only | current | Specifies if Web-Auth is enabled or disabled. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.3 | ColumnruckusWebAuthMode | read-only | current | Specifies the authentication mode used for authenticating the users. none - no authentication is performed passcode - passcode based authentication, where the … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.4 | ColumnruckusWebAuthMethod | read-only | current | When the AuthMode is configured as password, this specifies the order for performing authentication. radius - RADIUS server for authentication local - Local us… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.5 | ColumnruckusWebAuthMaxHosts | read-only | current | Specifies the maximum number of hosts allowed to be authenticated. Value 0 means no limit. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.6 | ColumnruckusWebAuthMaxAuthAttempts | read-only | current | Specifies the maximum number of attempts allowed during the auth cycle, after which the user is blocked for configured amount of time, before next authenticati… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.7 | ColumnruckusWebAuthReauthTime | read-only | current | Specifies the re-authentication time, so the authenticated users can be periodically reauthenticated after the timeout specified through this object. Value 0 m… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.8 | ColumnruckusWebAuthCycleTime | read-only | current | Specifies the time of the authentication since the first attempted user authentication, after which the user is not allowed to authenticate and must reload the… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.9 | ColumnruckusWebAuthBlockTime | read-only | current | Specifies the time for blocking the user when successive attempts have failed resulting in blocking the user. Value of 0 means, the user is blocked permanently. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.10 | ColumnruckusWebAuthMacAgeTime | read-only | current | Specifies the the time which together with mac-age-time of the switch is considered an inactive time of the authenticated host, after which the device is force… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.11 | ColumnruckusWebAuthPasscode | read-only | current | Specifies the statically configured passcode used to authenticate when passcode is used auth-method. The passcode is digits only. This can consist of upto 4 pa… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.12 | ColumnruckusWebAuthLocalUserDb | read-only | current | Specifies the locally configured User Database for use in authentication, when the auth-methos is password. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.13 | ColumnruckusWebAuthSecureLogin | read-only | current | Specifies if HTTPS is used for authentication or not. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.14 | ColumnruckusWebAuthAccounting | read-only | current | Specifies if accounting is enbled or disabled. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.15 | ColumnruckusWebAuthCaptiveProfile | read-only | current | Specifies the name of the configured Captive Portal profile, which should be used for redirection, if the auth-method is configured as captivePortal. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.16 | ColumnruckusWebAuthRedirectName | read-only | current | Specifies the name to be used for URL when internal authentication is used dusring authentication for prompting username/password from the users, otherwise swi… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.17 | ColumnruckusWebAuthWebpageRemoveUserId | read-write | current | Specifies if user-id field in custom webauth login page is disabled or not, default value is disable, i.e., user-id field is displayed |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.18 | ColumnruckusWebAuthWebpageUsernameLabel | read-write | current | Specifies the name to be used for user-id label in webauth login page |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.19 | ColumnruckusWebAuthWebpagePasswordLabel | read-write | current | Specifies the name to be used for password label in webauth login page |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.20 | ColumnruckusWebAuthUpLinkPort | read-write | current | Specifies the port to be used as uplink port in network segmentation deployment |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.21 | ColumnruckusWebAuthWebpageTop | read-write | current | Specifies the name to be used for Top of webauth login page |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.22 | ColumnruckusWebAuthWebpageBottom | read-write | current | Specifies the name to be used for Bottom of webauth login page |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.23 | ColumnruckusWebAuthWebpageTitle | read-write | current | Specifies the name to be used for Title in webauth login page |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.1.1.24 | ColumnruckusWebAuthWebpageLoginButton | read-write | current | Specifies the name to be used for Login-button in webauth login page |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.2 | TableruckusWebAuthTrustPortTable | not-accessible | current | A table that allows configuration of WebAuth Trust ports which are skipped from authentication in the given VLAN and are typically uplink ports. An entry exist… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.2.1 | RowruckusWebAuthTrustPortEntry | not-accessible | current | An entry in WebAuth Trust Port table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.2.1.1 | ColumnruckusWebAuthTrustPort | read-only | current | Specifies the trusted port or the up-link port, which is considered secure, so authentication is not performed on that port. This port generally provides acces… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.3 | TableruckusWebAuthDnsFilterTable | not-accessible | current | A table that allows configuration of WebAuth DNS filters which are qualified DNS servers and should be allowed access during authentication for DNS queries by … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1 | RowruckusWebAuthDnsFilterEntry | not-accessible | current | An entry in WebAuth DNS-Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.1 | ColumnruckusWebAuthDnsFilterId | not-accessible | current | An index into the DNS filter table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.2 | ColumnruckusWebAuthDnsFilterType | read-only | current | The address type of the this filter entry, a V4 or V6 address. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.3 | ColumnruckusWebAuthDnsFilterAddr | read-only | current | The DNS server address, which is a V4 or V6 address. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.3.1.4 | ColumnruckusWebAuthDnsFilterPrefix | read-only | current | The DNS server server prefix, which applies to V4/V6 addresses. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.4 | TableruckusWebAuthWhiteListTable | not-accessible | current | A table that allows configuration of WebAuth Whitelist entries which are qualified external servers that should be allowed access during authentication for var… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1 | RowruckusWebAuthWhiteListEntry | not-accessible | current | An entry in WebAuth Whitelist table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.1 | ColumnruckusWebAuthWhiteListId | not-accessible | current | An index into the White List Server table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.2 | ColumnruckusWebAuthWhiteListType | read-only | current | The address type of the this whitelist entry, a V4 or V6 or DNS name. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.3 | ColumnruckusWebAuthWhiteListAddr | read-only | current | The whitelist server address, which is a V4 or V6 address or DNS name. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.4.1.4 | ColumnruckusWebAuthWhiteListPrefix | read-only | current | The whitelist server prefix, which applies to V4/V6 addresses. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.5 | TableruckusWebAuthFilterTable | not-accessible | current | A table that allows configuration of WebAuth auth- filters which are applied to statically authenticate the clients without the need for authentication. This c… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1 | RowruckusWebAuthFilterEntry | not-accessible | current | An entry in WebAuth Auth-Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.1 | ColumnruckusWebAuthFilterMac | read-only | current | Specifies the MAC Address of the filter for matching the authenticating clients through static authentication. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.2 | ColumnruckusWebAuthFilterPort | read-only | current | Specifies the port in the VLAN, where this filter should be applied. If the port not valid, the entry applies to all ports in VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.3 | ColumnruckusWebAuthFilterDuration | read-only | current | Specifies the time for blocking or allowing the user when the filter results in authenticating the user (matches). Value of 0 means, the user is blocked perman… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.5.1.4 | ColumnruckusWebAuthFilterAction | read-only | current | Specifies the action to be performed when this filter is applied on the authenticating client when matching occurs. permit(1) - allow the client in specified V… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.6 | TableruckusWebAuthCaptivePortalTable | not-accessible | current | A table that allows configuration of WebAuth Captive profiles for various external WebAuth servers. The rntry provides the server information such as the DNS n… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1 | RowruckusWebAuthCaptivePortalEntry | not-accessible | current | An entry in WebAuth Captive Poratl table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.1 | ColumnruckusWebAuthCaptivePortalName | not-accessible | current | Specifies the name of the profile entry. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.2 | ColumnruckusWebAuthCaptivePortalType | read-only | current | Specifies the Captive server type - qualified name or IP address. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.3 | ColumnruckusWebAuthCaptivePortalAddr | read-only | current | Specifies the Captive server qualified name or IP address. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.4 | ColumnruckusWebAuthCaptivePortalPort | read-only | current | Specifies the Captive server port for HTTP/HTTPS access. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.4.6.1.5 | ColumnruckusWebAuthCaptivePortalLoginPage | read-only | current | Specifies the login page of the Captive server, where the client should be redirected to. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5 | NoderuckusAuthPortConfig | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1 | TableruckusAuthPortTable | not-accessible | current | A table that allows configuration of FlexAuth, including Dot1x and MAC-Auth for a specified port. Most objects at the port level oerride the similar configured… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1 | RowruckusAuthPortEntry | not-accessible | current | An entry of FlexAuth port configuration. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.1 | ColumnruckusAuthPortEnable | read-only | current | Specifies authentication methods that are enabled on this port. Unless the method is enabled globally, the same can't be enabled at port level. A bit field of … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.2 | ColumnruckusAuthPortDot1xControl | read-only | current | Specifies the Dot1x operating mode for this port, when Dot1x is enabled. force-unauthorized(1)- port's controlled port is placed unconditionally in the unautho… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.3 | ColumnruckusAuthPortDefaultVlan | read-only | current | This default VLAN is used to place this port, so this VLAN acts as a VLAN for the clients to belong to, when authentication server doesn't assign any VLANs. A … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.4 | ColumnruckusAuthPortVoiceVlan | read-only | current | This voice VLAN is used to advertise through LLDP/CDP on this port, when connected devices are detected as Phones and authentication server doesn't assign any … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.5 | ColumnruckusAuthPortCriticalVlan | read-only | current | This VLAN is used to place the clients of this port, when the authentication server times out and the port auth-timeout-action is configired as 'critical', so … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.6 | ColumnruckusAuthPortRestrictVlan | read-only | current | This VLAN is used to place the clients of this port, when the clients fail the authentication and the auth-failure-action is configured as 'restrict', so the c… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.7 | ColumnruckusAuthPortMode | read-only | current | Specifies the authentication mode for this port. This overrides the globally configured value. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.8 | ColumnruckusAuthPortMethods | read-only | current | Specifies authentication methods to be attempted in series of methods for this port. This overrides the globally configured value. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.9 | ColumnruckusAuthPortMaxSessions | read-only | current | Specifies the maximum number of authenticated clients allowed on this port. This doesn't include the clients allowed due to authentication failure and timeout … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.10 | ColumnruckusAuthPortFailAction | read-only | current | Specifies the action to be taken on this port. This overrides the globally set value. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.11 | ColumnruckusAuthPortTimeoutAction | read-only | current | Specifies the action to be taken on this port, when the authentication server times out for various readons like server busy, network access, etc. This overrid… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.12 | ColumnruckusAuthPortReauthTimeout | read-only | current | How often to re-authenticates clients of this port, when the clients were allowed due to authentication server timeout. Value of 0 disables the re-authenticati… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.13 | ColumnruckusAuthPortAging | read-only | current | Specifies, if denied and permitted sessions are enabled or disabled for aging on this port. This overrided the global value. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.14 | ColumnruckusAuthPortAllowTagged | read-only | current | Specifies, if denied and permitted sessions are enabled or disabled for aging on this port. A bit field of '1' indicates enabled, otherwise disabled. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.15 | ColumnruckusAuthPortSourceGuard | read-only | current | Source guard enabling ensures that the client IP address to be learned and allow the packets matching that IP address only. This is implied when user ACLs are … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.16 | ColumnruckusAuthPortDosAttacks | read-only | current | Specifies to prevent/allow Denial of Service attacks on this port. Constantly sending packets from different clients (MAC addresses) causes DOS, as the clients… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.5.1.1.17 | ColumnruckusAuthPortDosAttackLimit | read-only | current | The maximum number of clients to be allowed at any time without authentication, and if authentication pending clients exceed the configured limit (as specified… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.6 | NoderuckusAuthFilterConfig | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.6.1 | TableruckusAuthFilterTable | not-accessible | current | A table that allows configuration of FlexAuth auth- filters which are applied to statically authenticate the clients without the need for RADIUS server authent… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1 | RowruckusAuthFilterEntry | not-accessible | current | An entry of FlexAuth port Auth-Filter configuration. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.1 | ColumnruckusAuthFilterId | not-accessible | current | An index into the authe filter table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.2 | ColumnruckusAuthFilterMac | read-only | current | Specifies the MAC Address of the filter for matching the authenticating clients through static authentication. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.3 | ColumnruckusAuthFilterMask | read-only | current | Specifies the Mask of the filter for matching the incoming clients through static authentication. The mask is applied on MAC in the filter and client MAC befor… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.4 | ColumnruckusAuthFilterVlan | read-only | current | Specifies the VLAN which should be used to place the authenticating client after the matching is done. This VLAN applies only when the action is permit. Denied… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.6.1.1.5 | ColumnruckusAuthFilterAction | read-only | current | Specifies the action to be performed when this filter is applied on the authenticating client and matching occurs. permit(1) - allow the client in specified VL… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7 | NoderuckusAuthSessions | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1 | TableruckusAuthSessionTable | not-accessible | current | A table providing information about the FlexAuth sessions for each client at port level in the Ruckus device. This table contains entries for all the clients a… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1 | RowruckusAuthSessionEntry | not-accessible | current | An entry containing information about the FlexAuth session of a specified client on a port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.1 | ColumnruckusAuthSessionMac | read-only | current | Specifies the MAC Address of the client (device/host) represented by this session entry |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.2 | ColumnruckusAuthSessionVlan | read-only | current | Specifies the VLAN, the client (device/host) belongs to, represented by this session entry. In case of voice-phones, this VLAN is the voice-VLAN (tagged) and i… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.3 | ColumnruckusAuthSessionVlanType | read-only | current | Decribes the type of the VLAN associated with the session. default(1) - Default VLANs as configured on Ruckus device restrict(2) - Restricted VLAN as authentic… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.4 | ColumnruckusAuthSessionTaggedVlan | read-only | current | Tagged VLAN or Voice VLAN sent by the RADIUS server, so the port gets added to the VLAN, to prepare the device to send tagged packets in case of phones. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.5 | ColumnruckusAuthSessionUserName | read-only | current | Indicates the User name associated with the client, represented by this session. In case of Dot1x sessions, it's the username used by the user to log into the … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.6 | ColumnruckusAuthSessionDeviceType | read-only | current | Decribes the type of the client connnected and authenticated on this port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.7 | ColumnruckusAuthSessionMethod | read-only | current | Specifies the authentication method that is used for authenticating the client on this port represented by this session. It's possible that both authentication… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.8 | ColumnruckusAuthSessionMode | read-only | current | Indicates the authentication mode applied for this client on this port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.9 | ColumnruckusAuthSessionStatus | read-only | current | The authentication state of the session which can take the following values. allowed - client authentication is successful, so the complete access is granted b… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.10 | ColumnruckusAuthSessionDot1xStatus | read-only | current | Indicates the state of Dot1x authentication, if the client is using Dot1x for authentication. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.11 | ColumnruckusAuthSessionAgingType | read-only | current | Indicates the aging status of the client session which can be of the following values. software(1): Client MAC entry is cleared as the entry timedout in hardwa… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.12 | ColumnruckusAuthSessionAge | read-only | current | When the aging type is either software or hardware, this object indicates the time, the session had been in that state. When the configured maximum time is rea… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.13 | ColumnruckusAuthSessionTimeout | read-only | current | Specifies the maximum amount of time, the session should exit before re-authenticating or terminating the sessions depending on another RADIUS attribute 'Termi… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.14 | ColumnruckusAuthSessionIdleTimeout | read-only | current | Specifies the maximum amount of time after which the session is cleared when there is no traffic from the client. A value of 0 means, the sessions never gets t… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.15 | ColumnruckusAuthSessionTime | read-only | current | Indcates the session UP time since the session had been up or created. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.16 | ColumnruckusAuthSessionV4IngressAcl | read-only | current | Specifies the User Access List (ACL) applied in the Ingress direction for the IPv4 traffic for this client on this port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.17 | ColumnruckusAuthSessionV4EgressAcl | read-only | current | Specifies the User Access List (ACL) applied in the Egress direction for the IPv4 traffic for this client on this port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.18 | ColumnruckusAuthSessionV6IngressAcl | read-only | current | Specifies the User Access List (ACL) applied in the Ingress direction for the IPv6 traffic for this client on this port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.19 | ColumnruckusAuthSessionV6EgressAcl | read-only | current | Specifies the User Access List (ACL) applied in the Egress direction for the IPv6 traffic for this client on this port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.20 | ColumnruckusAuthSessionTxOctets | read-only | current | Specifies the number bytes sent for this session on the port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.21 | ColumnruckusAuthSessionRxOctets | read-only | current | Specifies the number bytes received for this session on the port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.22 | ColumnruckusAuthSessionTxPkts | read-only | current | Specifies the number bytes sent for this session on the port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.23 | ColumnruckusAuthSessionRxPkts | read-only | current | Specifies the number bytes received for this session on the port. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.24 | ColumnruckusAuthSessionFailureReason | read-only | current | Specifies the internal failure reason for this client, such as memory allocation, RADIUS attribute parsing, RADIUS REJECT, etc. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.1.1.25 | ColumnruckusAuthSessionFlags | read-only | current | Desacribes various other parameters of client session, by clubbing them together in one object for simplicity. staticAuthenticated(0): Client is authenticatica… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.2 | TableruckusAuthSessionAddrTable | not-accessible | current | An address table providing V4/V6 information about the FlexAuth sessions for each client at port level in the Ruckus device. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1 | RowruckusAuthSessionAddrEntry | not-accessible | current | An entry containing information about the FlexAuth session address of a specified client on a port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1.1 | ColumnruckusAuthSessionAddrId | not-accessible | current | An index into the White List Server table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1.2 | ColumnruckusAuthSessionAddrType | read-only | current | The address type of the this address entry, a V4 or V6. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.7.2.1.3 | ColumnruckusAuthSessionAddr | read-only | current | The address of this session entry, which is a V4 or V6 address. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8 | NoderuckusAuthStatistics | |||
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1 | TableruckusAuthStatsTable | not-accessible | current | A table that provides information about the summary of MAC-Auth and Dot1x sessions at port level. An entry exists in this table for every port enabled for Flex… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1 | RowruckusAuthStatsEntry | not-accessible | current | An entry of port level FlexAuth session summary table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.1 | ColumnruckusDot1xSessionsAttempted | read-only | current | The number of Dot1x sessions attempted on this port, since the time the stats were cleared. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.2 | ColumnruckusDot1xSessionsAccepted | read-only | current | The number of Dot1x sessions accepted or permited on this port, since the time the stats were cleared. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.3 | ColumnruckusDot1xSessionsRejected | read-only | current | The number of Dot1x sessions failed or rejected on this port, since the time the stats were cleared. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.4 | ColumnruckusDot1xSessionsInProgress | read-only | current | The number of Dot1x sessions which are in progress on this port waiting for authentication to be completed, since the time the stats were cleared. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.5 | ColumnruckusDot1xSessionsErrored | read-only | current | The number of Dot1x sessions which are neither accepted or rejected due to conditions like timeout, resource failure, etc; on this port, since the time the sta… |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.6 | ColumnruckusMacAuthSessionsAttempted | read-only | current | The number of MAC-Auth sessions attempted on this port, since the time the stats were cleared. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.7 | ColumnruckusMacAuthSessionsAccepted | read-only | current | The number of MAC-Auth sessions accepted or permited on this port, since the time the stats were cleared |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.8 | ColumnruckusMacAuthSessionsRejected | read-only | current | The number of MAC-Auth sessions failed or rejected on this port, since the time the stats were cleared |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.9 | ColumnruckusMacAuthSessionsInProgress | read-only | current | The number of MAC-Auth sessions which are in progress on this port waiting for authentication to be completed, since the time the stats were cleared |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.1.1.10 | ColumnruckusMacAuthSessionsErrored | read-only | current | The number of MAC-Auth sessions which are neither accepted or rejected due to conditions like timeout, resource failure, etc; on this port, since the time the … |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2 | TableruckusDot1xAuthStatsTable | not-accessible | current | A table that provides information about the Dot1x Statistics at port level. An entry exists in this table for every port enabled for Dot1x. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1 | RowruckusDot1xAuthStatsEntry | not-accessible | current | An entry of per port Dot1x statistics table. |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.1 | ColumnruckusDot1xTxEAPFrames | read-only | current | The total number of EAPOL frames transmitted on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.2 | ColumnruckusDot1xTxEAPReqIdFrames | read-only | current | The number of EAP-Request/Identity frames transmitted on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.3 | ColumnruckusDot1xTxEAPReqFrames | read-only | current | The number of transmitted EAP request frames that are not EAP-Request/identify on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.4 | ColumnruckusDot1xRxEAPFrames | read-only | current | The total number of EAPOL frames received on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.5 | ColumnruckusDot1xRxEAPStartFrames | read-only | current | The number of EAPOL-Start frames received on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.6 | ColumnruckusDot1xRxEAPLogOffFrames | read-only | current | The number of EAPOL-Logoff frames received on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.7 | ColumnruckusDot1xRxEAPRespIdFrames | read-only | current | The number of EAP-Response/Identify frames received on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.8 | ColumnruckusDot1xRxEAPRespFrames | read-only | current | The number of received EAP-Response frames other than EAP-Response/Identity on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.9 | ColumnruckusDot1xRxEAPInvalidFrames | read-only | current | The number of invalid EAPOL frames received on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.10 | ColumnruckusDot1xRxLengthErrorFrames | read-only | current | The number of EAPOL frames received with incorrect length on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.11 | ColumnruckusDot1xRxEAPLastFrameVersion | read-only | current | The version of last EAP frame received on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.1.8.2.1.12 | ColumnruckusDot1xRxEAPLastFrameSource | read-only | current | The MAC address of the source from where the last EAP frame received on this port |
| 1.3.6.1.4.1.1991.1.1.3.44.2 | NoderuckusAuthConformance | |||
| 1.3.6.1.4.1.1991.1.1.3.44.2.1 | NoderuckusAuthMIBCompliances | |||
| 1.3.6.1.4.1.1991.1.1.3.44.2.1.1 | ComplianceruckusAuthCompliance | current | The compliance statement for entities which implement RUCKUS-AUTH-MIB. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2 | NoderuckusAuthMIBGroups | |||
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.1 | GroupruckusAuthConfigGroup | current | A collection of objects that provide global configuration of FlexAuth feature, common to both MAC-Auth and Dot1x. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.2 | GroupruckusDot1xAuthConfigGroup | current | A collection of objects that provide global global configuration of Dot1x sub-feature, which applies only to Dot1x. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.3 | GroupruckusMacAuthConfigGroup | current | A collection of objects that provide global configuration of MAC-Auth sub-feature, which applies only to MAC-Auth. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.4 | GroupruckusAuthPortConfigGroup | current | A collection of objects that provide interface configuration of FlexAuth feature,common to both MAC-Auth and Dot1x. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.5 | GroupruckusAuthFilterConfigGroup | current | A collection of objects that provide interface auth filter configuration of FlexAuth feature, common to both MAC-Auth and Dot1x. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.6 | GroupruckusAuthSessionsGroup | current | A collection of objects that provide session information of a FlexAuth session. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.7 | GroupruckusAuthStatsGroup | current | A collection of objects that provide session statistics of FlexAuth sessions at port level. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.8 | GroupruckusDot1xAuthStatsGroup | current | A collection of objects that provide Dot1x statistics of Dot1x sessions at port level. | |
| 1.3.6.1.4.1.1991.1.1.3.44.2.2.9 | GroupruckusWebAuthConfigGroup | current | A collection of objects that provide WebAuth configuration. | |
| 1.3.6.1.4.1.1991.1.1.3.45 | IdentityruckusAclMIB | Management Information for describing the MAC, IPv4, IPv6 ACLs, their bindings on ports, VLANs and VLAN+Port combinations. The Ruckus Wireless, Inc proprietary… | ||
| 1.3.6.1.4.1.1991.1.1.3.45.0 | NoderuckusAclNotify | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1 | NoderuckusAclObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1.1 | NoderuckusAcls | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1.1.1 | TableruckusAclTable | not-accessible | current | Table of Ruckus Ipv4/Ipv6/MAC Access Control Lists (ACLs) |
| 1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1 | RowruckusAclEntry | not-accessible | current | An entry in the Ruckus Ipv4/Ipv6/MAC Access Control List table. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.1 | ColumnruckusAclType | not-accessible | current | Type of the ACL, this entry specifies. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.2 | ColumnruckusAclName | not-accessible | current | Unique Access Control List name for an entry. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.3 | ColumnruckusAclAcctEnable | read-create | current | Specifies if accounting is enabled for the filters in this ACL. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.4 | ColumnruckusAclStandard | read-only | current | Specifies the type IPv4 ACL - standard or extended, if ACL is of IPv4 ACL. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.1.1.1.5 | ColumnruckusAclRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creat… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2 | NoderuckusAclFilters | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1 | NoderuckusIpv4Filters | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1 | TableruckusIpv4AclFilterTable | not-accessible | current | Table of Ruckus Ipv4 Access Control List filters |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1 | RowruckusIpv4AclFilterEntry | not-accessible | current | An entry in the Ruckus Ipv4 Access Control List Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.1 | ColumnruckusIpv4AclFilterSeqNum | not-accessible | current | Specifies the sequence number for this ACL filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.2 | ColumnruckusIpv4AclFilterAction | read-create | current | Action to take if the IP packet matches with this ACL filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.3 | ColumnruckusIpv4AclFilterStdProtocol | read-create | current | Standard transport protocols allowed. The extended option enables to define other protocol using the OID ruckusIpv4AclFilterExtProtocol which takes any value. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.4 | ColumnruckusIpv4AclFilterExtProtocol | read-create | current | Any transport protocol other than standard protocols mentioned with ruckusIpv4AclFilterStdProtocol OID. 0 means any protocol. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.5 | ColumnruckusIpv4AclFilterSrcAddr | read-create | current | Source Ipv4 address to match in packets. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.6 | ColumnruckusIpv4AclFilterSrcMask | read-create | current | Source Ipv4 address mask used in combination with source IPv4 address to derive effective address for matching. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.7 | ColumnruckusIpv4AclFilterSrcOperator | read-create | current | Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.8 | ColumnruckusIpv4AclFilterSrcPortLow | read-create | current | Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.9 | ColumnruckusIpv4AclFilterSrcPortHigh | read-create | current | Used only if the operator is defined as 'range', where it specifies the end of range |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.10 | ColumnruckusIpv4AclFilterDestAddr | read-create | current | Destination Ipv4 address to match in packets. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.11 | ColumnruckusIpv4AclFilterDestMask | read-create | current | Destination Ipv4 address mask used in combination with source IPv4 address to derive effective address for matching. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.12 | ColumnruckusIpv4AclFilterDestOperator | read-create | current | Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.13 | ColumnruckusIpv4AclFilterDestPortLow | read-create | current | Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.14 | ColumnruckusIpv4AclFilterDestPortHigh | read-create | current | Used only if the operator is defined as 'range', where it specifies the end of range |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.15 | ColumnruckusIpv4AclFilterEstablished | read-create | current | Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This filter only applies to TCP transport protocol. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.16 | ColumnruckusIpv4AclFilterPrecedence | read-create | current | Specifies the IP precedence value to match in packets. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.17 | ColumnruckusIpv4AclFilterTos | read-create | current | This refers to the IP TOS value in range <0-15>, which is the sum of numeric vlaues of the following options 0x0 - normal TOS 0x1 - minimum monetary cost TOS 0… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.18 | ColumnruckusIpv4AclFilterIcmpType | read-create | current | Specifies the ICMP type for matching if the Protocol is ICMP. 0 means ignore the field. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.19 | ColumnruckusIpv4AclFilterIcmpCode | read-create | current | ICMP Message Code value. Used in combination with ICMP Message Type to setup an ICMP filter. This object is not used with any other protocol. 0 means ignored. … |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.20 | ColumnruckusIpv4AclFilterExtIcmpType | read-create | current | Any type that can't be specified using the standard types can be specified using this object. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.21 | ColumnruckusIpv4AclFilterPolicyName | read-create | current | Specifies the DSCP value to use in matching or marking. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.22 | ColumnruckusIpv4AclFilterDscpMatch | read-create | current | Specifies the DSCP value for matching with this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.23 | ColumnruckusIpv4AclFilterDscpForce | read-create | current | Specifies the DSCP value to be used for marking in outgoing packets matching this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.24 | ColumnruckusIpv4AclFilterPriorityMatch | read-create | current | Specifies the 802.1P priority for matching with this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.25 | ColumnruckusIpv4AclFilterPriorityForce | read-create | current | Specifies the 802.1P priority to be used for marking in outgoing packets matching this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.26 | ColumnruckusIpv4AclFilterInternalPriority | read-create | current | QoS priority option for this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.27 | ColumnruckusIpv4AclFilterMirrorPkts | read-create | current | Mirror packets matching ACL permit clause. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.28 | ColumnruckusIpv4AclFilterLogEnable | read-create | current | Specifies if logging is enabled for the filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.29 | ColumnruckusIpv4AclFilterComments | read-only | current | Remark description of individual Access Control List entry. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.1.1.1.30 | ColumnruckusIpv4AclFilterRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creat… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2 | NoderuckusIpv6Filters | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1 | TableruckusIpv6AclFilterTable | not-accessible | current | Table of Ruckus Ipv6 Access Control List Filters |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1 | RowruckusIpv6AclFilterEntry | not-accessible | current | An entry in the Ruckus Ipv6 Access Control List Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.1 | ColumnruckusIpv6AclFilterSeqNum | not-accessible | current | Specifies the sequence number for this ACL filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.2 | ColumnruckusIpv6AclFilterAction | read-create | current | Action to take if the IPv6 packet matches with this access control list filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.3 | ColumnruckusIpv6AclFilterStdProtocol | read-create | current | Standard transport protocols allowed. The extended option enables to define other protocol using the OID ruckusIpv6AclFilterExtProtocol which takes any value. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.4 | ColumnruckusIpv6AclFilterExtProtocol | read-create | current | Any transport protocol other than standard protocols mentioned with ruckusIpv6AclFilterStdProtocol OID. 0 means any protocol. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.5 | ColumnruckusIpv6AclFilterSrcAddr | read-create | current | Source Ipv6 address to match in packets. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.6 | ColumnruckusIpv6AclFilterSrcPrefixLen | read-create | current | Source Ipv6 address prefix length. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.7 | ColumnruckusIpv6AclFilterSrcOperator | read-create | current | Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.8 | ColumnruckusIpv6AclFilterSrcPortLow | read-create | current | Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.9 | ColumnruckusIpv6AclFilterSrcPortHigh | read-create | current | Used only if the operator is defined as 'range', where it specifies the end of range |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.10 | ColumnruckusIpv6AclFilterDestAddr | read-create | current | Destination Ipv6 address to match in packets. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.11 | ColumnruckusIpv6AclFilterDestPrefixLen | read-create | current | Destination Ipv6 address prefix length. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.12 | ColumnruckusIpv6AclFilterDestOperator | read-create | current | Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.13 | ColumnruckusIpv6AclFilterDestPortLow | read-create | current | Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.14 | ColumnruckusIpv6AclFilterDestPortHigh | read-create | current | Used only if the operator is defined as 'range', where it specifies the end of range |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.15 | ColumnruckusIpv6AclFilterEstablished | read-create | current | Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This filter only applies to TCP transport protocol. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.16 | ColumnruckusIpv6AclFilterIcmpType | read-create | current | Specifies the ICMP6 type for matching if the Protocol is ICMP6. 0 means ignore the field. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.17 | ColumnruckusIpv6AclFilterIcmpCode | read-create | current | ICMP Message Code value. Used in combination with ICMP Message Type to setup an ICMP filter. This object is not used with any other protocol. 0 means ignored. … |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.18 | ColumnruckusIpv6AclFilterExtIcmpType | read-create | current | Any type that can't be specified using the standard types can be specified using this object. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.19 | ColumnruckusIpv6AclFilterPolicyName | read-create | current | Specifies the DSCP value to use in matching or marking. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.20 | ColumnruckusIpv6AclFilterDscpMatch | read-create | current | Specifies the DSCP value for matching with this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.21 | ColumnruckusIpv6AclFilterDscpForce | read-create | current | Specifies the DSCP value to be used for marking in outgoing packets matching this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.22 | ColumnruckusIpv6AclFilterPriorityMatch | read-create | current | Specifies the 802.1P priority for matching with this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.23 | ColumnruckusIpv6AclFilterPriorityForce | read-create | current | Specifies the 802.1P priority to be used for marking in outgoing packets matching this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.24 | ColumnruckusIpv6AclFilterInternalPriority | read-create | current | QoS priority option for this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.25 | ColumnruckusIpv6AclFilterFragments | read-create | current | Match IPv6 fragments with non-zero fragment offset in V6 packets matching this ACL permit clause. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.26 | ColumnruckusIpv6AclFilterSourceRoute | read-create | current | Match only rource routed packets matching this ACL permit clause. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.27 | ColumnruckusIpv6AclFilterMirrorPkts | read-create | current | Mirror packets matching ACL permit clause. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.28 | ColumnruckusIpv6AclFilterLogEnable | read-create | current | Specifies if logging is enabled for the filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.29 | ColumnruckusIpv6AclFilterComments | read-only | current | Remark description of individual Access Control List entry. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.30 | ColumnruckusIpv6AclFilterRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creat… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3 | NoderuckusMacFilters | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1 | TableruckusMacAclFilterTable | not-accessible | current | Table of Ruckus Mac Access Control List Filters. MAC ACLs filter traffic based on any of the following fields: - Source MAC address and source MAC mask - Desti… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1 | RowruckusMacAclFilterEntry | not-accessible | current | An entry in the Ruckus MAC Access Control List Filter table. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.1 | ColumnruckusMacAclFilterSeqNum | not-accessible | current | Specifies the sequence number for this ACL filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.2 | ColumnruckusMacAclFilterAction | read-create | current | Action to take if the L2 packet matches with this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.3 | ColumnruckusMacAclFilterSrcAddr | read-create | current | Source MAC address to match in the incoming L2 packet. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.4 | ColumnruckusMacAclFilterSrcMask | read-create | current | Source MAC address mask to apply with source address to derive the MAC address for filter action. For example, to match on the first two bytes of MAC aabb.ccdd… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.5 | ColumnruckusMacAclFilterDestAddr | read-create | current | Destination MAC address to match in the incoming L2 packet. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.6 | ColumnruckusMacAclFilterDestMask | read-create | current | Destination MAC address mask to apply with destination address to derive the MAC address for filter action. For example, to match on the first two bytes of MAC… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.7 | ColumnruckusMacAclFilterEtherType | read-create | current | Ethernet Type to match in the incoming packet, if specified. The extended option enables to define other types sing the OID ruckusMacAclFilterExtEtherType whic… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.8 | ColumnruckusMacAclFilterExtEtherType | read-create | current | Any EtherType other than standard protocols mentioned with ruckusMacAclFilterEtherType OID. 0 means any protocol. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.9 | ColumnruckusMacAclFilterMirrorPkts | read-create | current | Mirror packets matching ACL permit clause. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.10 | ColumnruckusMacAclFilterLogEnable | read-create | current | Specifies if logging is enabled for this filter. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.2.3.1.1.11 | ColumnruckusMacAclFilterRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the creat… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3 | NoderuckusAclBindings | |||
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1 | TableruckusAclIfBindTable | not-accessible | current | Table of IPv4/IPv6/MAC ACL bindings to a port. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1 | RowruckusAclIfBindEntry | not-accessible | current | An entry in the IPv4/IPv6/MAC ACL bindings for a gievn port. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.1 | ColumnruckusAclIfBindPort | not-accessible | current | The port on where this ACL binding is applied on. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.2 | ColumnruckusAclIfBindType | not-accessible | current | Type of the ACL, this binding describes on the port. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.3 | ColumnruckusAclIfBindDirection | not-accessible | current | Direction in which this ACL is applied on the port. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.4 | ColumnruckusAclIfBindName | read-create | current | Defined ACL name to bind on port in the given direction. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.5 | ColumnruckusAclIfBindLog | read-create | current | Enable or disable logging on the port for this ACL. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.1.1.6 | ColumnruckusAclIfBindRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the bindi… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2 | TableruckusAclVlanBindTable | not-accessible | current | Table of IPv4/IPv6/MAC ACL bindings to a VLAN |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1 | RowruckusAclVlanBindEntry | not-accessible | current | An entry in the IPv4/IPv6/MAC ACL bindings for a gievn VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.1 | ColumnruckusAclVlanBindId | not-accessible | current | The VLAN where this ACL binding is applied. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.2 | ColumnruckusAclVlanBindType | not-accessible | current | Type of the ACL, this binding describes on the VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.3 | ColumnruckusAclVlanBindDirection | not-accessible | current | Direction in which this ACL is applied on the VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.4 | ColumnruckusAclVlanBindName | read-create | current | Defined ACL name to bind on VLAN in the given direction. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.5 | ColumnruckusAclVlanBindLog | read-create | current | Enable or disable logging on the VLAN for this ACL. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.2.1.6 | ColumnruckusAclVlanBindRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the bindi… |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3 | TableruckusAclVPortBindTable | not-accessible | current | Table of IPv4/IPv6/MAC ACL bindings to a port on VLAN |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1 | RowruckusAclVPortBindEntry | not-accessible | current | An entry in the IPv4/IPv6/MAC ACL bindings for a port in a VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.1 | ColumnruckusAclVPortBindId | not-accessible | current | The VLAN where this ACL binding is applied on. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.2 | ColumnruckusAclVPortBindPort | not-accessible | current | The port in the VLAN where this ACL binding is applied on. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.3 | ColumnruckusAclVPortBindType | not-accessible | current | Type of the ACL, this binding describes on the port in a VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.4 | ColumnruckusAclVPortBindDirection | not-accessible | current | Direction in which this ACL is applied on the port in a VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.5 | ColumnruckusAclVPortBindName | read-create | current | Defined ACL name to bind on port in a VLAN in the given direction. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.6 | ColumnruckusAclVPortBindLog | read-create | current | Enable or disable logging on the port in a VLAN for this ACL. |
| 1.3.6.1.4.1.1991.1.1.3.45.1.3.3.1.7 | ColumnruckusAclVPortBindRowStatus | read-create | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to createAndGo(4) results in the bindi… |
| 1.3.6.1.4.1.1991.1.1.3.45.2 | NoderuckusAclConformance | |||
| 1.3.6.1.4.1.1991.1.1.3.45.2.1 | NoderuckusAclCompliances | |||
| 1.3.6.1.4.1.1991.1.1.3.45.2.1.1 | ComplianceruckusAclCompliance | current | The compliance statement for entities which implement RUCKUS-ACL-MIB. | |
| 1.3.6.1.4.1.1991.1.1.3.45.2.2 | NoderuckusAclGroups | |||
| 1.3.6.1.4.1.1991.1.1.3.45.2.2.1 | GroupruckusAclGroup | current | A collection of objects that provide ACL information on a given unit. | |
| 1.3.6.1.4.1.1991.1.1.3.46 | IdentityruckusDhcpClientMIB | Copyright 2020 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, I… | ||
| 1.3.6.1.4.1.1991.1.1.3.46.1 | NoderuckusDhcpClientGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.46.1.1 | ScalarruckusDhcpClientGlobalConfigState | read-write | current | Configure state for DHCP client on the global level. enabled(1) - DHCPv4 client is enabled. disabled(0) - DHCPv4 client is disabled. Note: DHCPv4 server should… |
| 1.3.6.1.4.1.1991.1.1.3.46.1.2 | ScalarruckusDhcpClientGlobalAutoUpdateConfigState | read-write | current | Configure state for DHCP client auto-update on the global level. enabled(1) - DHCPv4 client auto-update is enabled. disabled(0) - DHCPv4 client auto-update is … |
| 1.3.6.1.4.1.1991.1.1.3.46.1.3 | ScalarruckusDhcpClientSpecificVEPort | read-write | current | Configure state of DHCP client on specific VE at the global level. If DHCP client is configured at specific VE, ifIndex of the DHCP client enabled VE port is r… |
| 1.3.6.1.4.1.1991.1.1.3.47 | IdentityruckusNdiMIB | Management Information for configuration of Neighbour Discovery inspection feature. NDI is a security mechanism which validates all ND packets in a subnet and … | ||
| 1.3.6.1.4.1.1991.1.1.3.47.0 | NoderuckusNdiNotify | |||
| 1.3.6.1.4.1.1991.1.1.3.47.1 | NoderuckusNdiObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.47.1.1 | NoderuckusNdiVlan | |||
| 1.3.6.1.4.1.1991.1.1.3.47.1.1.1 | TableruckusNdiVlanConfigTable | not-accessible | current | A table provides the mechanism to control Neighbor Discovery Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding ent… |
| 1.3.6.1.4.1.1991.1.1.3.47.1.1.1.1 | RowruckusNdiVlanConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable Neighbor Discovery Inspection at the existing VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.47.1.1.1.1.1 | ColumnruckusNdiVlanConfigVlanId | not-accessible | current | This object indicates the VLAN number on which Neighbor Discovery Inspection feature is configured. |
| 1.3.6.1.4.1.1991.1.1.3.47.1.1.1.1.2 | ColumnruckusNdiVlanDynNDInspectionEnable | read-write | current | This object indicates whether Neighbor Discovery Inspection is enabled in this VLAN. If this object is set to 'true', Neighbor Discovery Inspection is enabled.… |
| 1.3.6.1.4.1.1991.1.1.3.47.1.2 | NoderuckusNdiInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.47.1.2.1 | TableruckusNdInspectIfConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state for Neighbor Discovery Inspection purpose at each physical interface. |
| 1.3.6.1.4.1.1991.1.1.3.47.1.2.1.1 | RowruckusNdiIfConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable trust state for Neighbor Discovery Inspection at each physical interface capable of this feature. |
| 1.3.6.1.4.1.1991.1.1.3.47.1.2.1.1.1 | ColumnruckusNdiIfTrustValue | read-write | current | This object indicates whether the interface is trusted for Neighbor Discovery Inspection. If this object is set to 'true', the interface is trusted. ND packets… |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3 | NoderuckusNdiNDInspect | |||
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1 | TableruckusNdiStaticNDInspectTable | not-accessible | current | A table provides the mechanism to control Neighbor Discovery Inspection entries created by the user. When an IP-MAC mapping entry is created in a device suppor… |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1 | RowruckusNdiStaticNDInspectEntry | not-accessible | current | A row instance contains the configuration to map a device IP address with its MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.1 | ColumnruckusNdiStaticNDInspectIpv6Addr | not-accessible | current | The device IPv6 address. |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.2 | ColumnruckusNdiStaticNDInspectMacAddr | read-create | current | The device MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.3 | ColumnruckusNdiStaticNDInspectType | read-only | current | The type of the ND entry |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.4 | ColumnruckusNdiStaticNDInspectState | read-only | current | The state of the ND entry |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.5 | ColumnruckusNdiStaticNDInspectAge | read-only | current | The timer of the ND entry |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.6 | ColumnruckusNdiStaticNDInspectPort | read-only | current | The ifindex vlaue of a port of the ND entry |
| 1.3.6.1.4.1.1991.1.1.3.47.1.3.1.1.7 | ColumnruckusNdiStaticNDInspectRowStatus | read-create | current | The status of the entry in the table. |
| 1.3.6.1.4.1.1991.1.1.3.47.2 | NoderuckusNdiConformance | |||
| 1.3.6.1.4.1.1991.1.1.3.47.2.1 | NoderuckusNdiCompliances | |||
| 1.3.6.1.4.1.1991.1.1.3.47.2.1.1 | ComplianceruckusNdiCompliance | current | The compliance statement for entities which implement RUCKUS-NDI-MIB. | |
| 1.3.6.1.4.1.1991.1.1.3.48 | IdentityruckusDhcpv6SnoopMIB | Management Information for configuration of DHCPv6 Snooping feature. DHCPv6 Snooping is a security feature which enables the device to filter untrusted DHCPv6 … | ||
| 1.3.6.1.4.1.1991.1.1.3.48.0 | NoderuckusDhcpv6SnoopNotify | |||
| 1.3.6.1.4.1.1991.1.1.3.48.1 | NoderuckusDhcpv6SnoopObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.48.1.1 | NoderuckusDhcpv6SnoopGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.48.1.1.1 | ScalarruckusDhcpv6SnoopGlobalClearOper | read-write | current | valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears all entries in the DHCPv6 binding data… |
| 1.3.6.1.4.1.1991.1.1.3.48.1.2 | NoderuckusDhcpv6SnoopVlan | |||
| 1.3.6.1.4.1.1991.1.1.3.48.1.2.1 | TableruckusDhcpv6SnoopVlanConfigTable | not-accessible | current | A table provides the mechanism to control DHCPv6 Snooping per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this tab… |
| 1.3.6.1.4.1.1991.1.1.3.48.1.2.1.1 | RowruckusDhcpv6SnoopVlanConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable DHCPv6 Snooping at the existing VLAN. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.2.1.1.1 | ColumnruckusDhcpv6SnoopVlanConfigVLanId | not-accessible | current | This object indicates the VLAN number on which DHCP Snooping feature is configured. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.2.1.1.2 | ColumnruckusDhcpv6SnoopVlanConfigDhcpv6SnoopEnable | read-write | current | This object indicates whether DHCPv6 Snooping is enabled in this VLAN. If this object is set to 'true', DHCPv6 Snooping is enabled. If this object is set to 'f… |
| 1.3.6.1.4.1.1991.1.1.3.48.1.3 | NoderuckusDhcpv6SnoopInterface | |||
| 1.3.6.1.4.1.1991.1.1.3.48.1.3.1 | TableruckusDhcpv6SnoopIfConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state for DHCPv6 Snooping purpose at each physical interface. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.3.1.1 | RowruckusDhcpv6SnoopIfConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable trust state for DHCPv6 Snooping at each physical interface capable of this feature. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.3.1.1.1 | ColumnruckusDhcpv6SnoopIfConfigTrustValue | read-create | current | This object indicates whether the interface is trusted for DHCPv6 Snooping. If this object is set to 'true', the interface is trusted. DHCPv6 packets coming to… |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4 | NoderuckusDhcpv6SnoopBind | |||
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1 | TableruckusDhcpv6SnoopBindTable | not-accessible | current | A table provides the information of DHCPv6 snooping binding database learnt by the device |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1 | RowruckusDhcpv6SnoopBindEntry | not-accessible | current | A row instance contains the information of DHCPv6 snoonping entry. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.1 | ColumnruckusDhcpv6SnoopBindMacAddr | not-accessible | current | The device MAC address. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.2 | ColumnruckusDhcpv6SnoopBindVlanId | not-accessible | current | This object indicates the VLAN number on which DHCPv6 snooping feature is configured. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.3 | ColumnruckusDhcpv6SnoopBindIpAddr | read-only | current | The device IP address. |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.4 | ColumnruckusDhcpv6SnoopBindType | read-only | current | The type of the ND entry |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.5 | ColumnruckusDhcpv6SnoopBindState | read-only | current | The state of the ND entry |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.6 | ColumnruckusDhcpv6SnoopBindPort | read-only | current | The port of the ND entry |
| 1.3.6.1.4.1.1991.1.1.3.48.1.4.1.1.7 | ColumnruckusDhcpv6SnoopBindClearOper | read-write | current | valid(0) - this value is always returned when the variable is read. clear(1) - setting the variable to this value clears this entry in the DHCPv6 binding datab… |
| 1.3.6.1.4.1.1991.1.1.3.48.2 | NoderuckusDhcpv6SnoopConformance | |||
| 1.3.6.1.4.1.1991.1.1.3.48.2.1 | ComplianceruckusDhcpv6SnoopCompliance | current | The compliance statement for entities which implement RUCKUS-DHCPv6Snoop-MIB. | |
| 1.3.6.1.4.1.1991.1.1.3.48.2.1 | NoderuckusDhcpv6SnoopCompliances | |||
| 1.3.6.1.4.1.1991.1.1.3.49 | IdentityruckusVxlanMIB | Management Information for configuration of VxLAN feature. VxLAN is a Layer 3 feature which helps to extend a Local Area Network over devices which are separat… | ||
| 1.3.6.1.4.1.1991.1.1.3.49.1 | NoderuckusVxlanObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.49.1.1 | NoderuckusVxlanOverlayGateway | |||
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1 | TableruckusVxlanOverlayGatewayTable | not-accessible | current | This table provides the general configuration details related to an overlay gateway. When a new overlay Gateway is created a new entry will be added in this ta… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1 | RowruckusVxlanOverlayGatewayEntry | not-accessible | current | An row instance of the Overlay Gateway table. |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.1 | ColumnruckusVxlanOverlayGatewayName | read-only | current | VxLAN Overlay Gateway Name |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.2 | ColumnruckusVxlanOverlayGatewayType | read-write | current | VxLAN Overlay Gateway Name Type Only Type Supported is: 1 - Layer2-Extension |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.3 | ColumnruckusVxlanOverlayGatewayLoopbackId | read-write | current | VxLAN Overlay Gateway Loopback ID |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.4 | ColumnruckusVxlanOverlayGatewayMappedVlans | read-only | current | VxLAN Overlay Gateway Number of Mapped Vlans |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.5 | ColumnruckusVxlanOverlayGatewayExtendedSites | read-only | current | VxLAN Overlay Gateway Number of Extended Sites |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.1.1.6 | ColumnruckusVxlanOverlayGatewayRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2 | TableruckusVxlanOverlayGatewayVlanMapTable | not-accessible | current | This table provides the information related to the vlan - vni mapping which is included in an overlay gateway If a new vlan- vni mapping is introduced in an ov… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1 | RowruckusVxlanOverlayGatewayVlanMapEntry | not-accessible | current | An row instance of the Overlay Gateway Vlan Map table. |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.1 | ColumnruckusVxlanOverlayGatewayVlanMapVlanId | read-only | current | Vlan Index of the VLAN - VNI Mapping |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.2 | ColumnruckusVxlanOverlayGatewayVlanMapVniId | read-write | current | VNI Index of the VLAN - VNI Mapping |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.3 | ColumnruckusVxlanOverlayGatewayVlanMapVfiId | read-only | current | VFI Index of the VLAN - VNI Mapping |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.4 | ColumnruckusVxlanOverlayGatewayVlanMapCrossConnect | read-only | current | The Cross-Connect Setting for a VLAN-VNI Mapping 0 - If Cross-Connect Setting is Disabled 1 - If Cross-Connect Setting is Enabled |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.5 | ColumnruckusVxlanOverlayGatewayVlanMapStatistics | read-only | current | The VXLAN Statistics for a VLAN-VNI Mapping 0 - If Setting is Disabled 1 - If Setting is Enabled |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.6 | ColumnruckusVxlanOverlayGatewayVlanMapAccessPortCount | read-only | current | Number of Access Ports Added to the VLAN |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.7 | ColumnruckusVxlanOverlayGatewayVlanMapExtendedSite | read-only | current | Number of Sites the VLAN - VNI Mapping is extended to |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.8 | ColumnruckusVxlanOverlayGatewayVlanMapRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.9 | ColumnruckusVxlanOverlayGatewayVlanMapInUnicastPackets | read-only | current | Number of incoming unicast packets on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.10 | ColumnruckusVxlanOverlayGatewayVlanMapInUnicastBytes | read-only | current | Number of incoming unicast bytes on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.11 | ColumnruckusVxlanOverlayGatewayVlanMapInMulticastPackets | read-only | current | Number of incoming multicast packets on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.12 | ColumnruckusVxlanOverlayGatewayVlanMapInMutlticastBytes | read-only | current | Number of incoming multicast bytes on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.13 | ColumnruckusVxlanOverlayGatewayVlanMapInBroadcastPackets | read-only | current | Number of incoming broadcast packets on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.14 | ColumnruckusVxlanOverlayGatewayVlanMapInBroadcastBytes | read-only | current | Number of incoming broadcast bytes on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.15 | ColumnruckusVxlanOverlayGatewayVlanMapOutPackets | read-only | current | Number of outgoing packets on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.2.1.16 | ColumnruckusVxlanOverlayGatewayVlanMapOutBytes | read-only | current | Number of outgoing bytes on the VNI |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3 | TableruckusVxlanOverlayGatewaySiteTable | not-accessible | current | This table provides the information related to the external site which is extended by an overlay-gateway If a new site is extended by an overlay gateway then a… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1 | RowruckusVxlanOverlayGatewaySiteEntry | not-accessible | current | An row instance of the Overlay Gateway Site table. |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.1 | ColumnruckusVxlanOverlayGatewaySiteName | read-only | current | VxLAN Extended Site Name |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.2 | ColumnruckusVxlanOverlayGatewaySiteIpAddress | read-write | current | VxLAN Extended Site's IP Address |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.3 | ColumnruckusVxlanOverlayGatewaySiteStatus | read-only | current | VxLAN Extended Site's Status True - If Site is up False - If Site is Down |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.4 | ColumnruckusVxlanOverlayGatewaySiteRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.5 | ColumnruckusVxlanOverlayGatewaySiteInUnicastPackets | read-only | current | Number of incoming unicast packets on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.6 | ColumnruckusVxlanOverlayGatewaySiteInUnicastBytes | read-only | current | Number of incoming unicast bytes on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.7 | ColumnruckusVxlanOverlayGatewaySiteInMulticastPackets | read-only | current | Number of incoming multicast packets on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.8 | ColumnruckusVxlanOverlayGatewaySiteInMutlticastBytes | read-only | current | Number of incoming multicast bytes on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.9 | ColumnruckusVxlanOverlayGatewaySiteInBroadcastPackets | read-only | current | Number of incoming broadcast packets on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.10 | ColumnruckusVxlanOverlayGatewaySiteInBroadcastBytes | read-only | current | Number of incoming broadcast bytes on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.11 | ColumnruckusVxlanOverlayGatewaySiteOutPackets | read-only | current | Number of outgoing packets on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.12 | ColumnruckusVxlanOverlayGatewaySiteOutBytes | read-only | current | Number of outgoing bytes on the site's Network Virtual Port |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.13 | ColumnruckusVxlanOverlayGatewaySiteMonitoring | read-only | current | VxLAN Extended Site's Monitoring Status True - If Monitoring is Enabled False - If Monitoring is Disabled |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.14 | ColumnruckusVxlanOverlayGatewaySiteKeepAlive | read-write | current | VxLAN Extended Site's Monitoring Mechanism Keep-Alive Value The Interval after which an ICMP Ping is sent |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.3.1.15 | ColumnruckusVxlanOverlayGatewaySiteRetry | read-write | current | VxLAN Extended Site's Monitoring Mechanism Retry Value The Number of times the ICMP Pings will be sent to the extended site IP. If a response is not received a… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.4 | TableruckusVxlanOverlayGatewaySiteExtVlanTable | not-accessible | current | This table provides the information related to the vlans which are extended to an external site which is extended by an overlay-gateway If a new vlan is extend… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.4.1 | RowruckusVxlanOverlayGatewaySiteExtVlanEntry | not-accessible | current | An row instance of the Overlay Gateway Extended Site Vlan table. |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.4.1.1 | ColumnruckusVxlanOverlayGatewaySiteExtVlanId | read-only | current | Vlan Index extended to the site |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.4.1.2 | ColumnruckusVxlanOverlayGatewaySiteExtVlanRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.5 | TableruckusVxlanOverlayGatewaySiteIpListTable | not-accessible | current | This table provides the information related to the IPs which are added to the IP List in the site which is extended by an overlay-gateway. The IP List includes… |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1 | RowruckusVxlanOverlayGatewaySiteIpListEntry | not-accessible | current | An row instance of the Overlay Gateway Site IP List table. |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1.1 | ColumnruckusVxlanOverlayGatewaySiteIpListIpIndex | read-only | current | Index at which the IP is assigned in the IP List |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1.2 | ColumnruckusVxlanOverlayGatewaySiteIpListIpAddress | read-write | current | IP Address added to the IP List of the Site |
| 1.3.6.1.4.1.1991.1.1.3.49.1.1.5.1.3 | ColumnruckusVxlanOverlayGatewaySiteIpListRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.3.50 | NodesnPortProfile | |||
| 1.3.6.1.4.1.1991.1.1.3.50.1 | TablesnSwPortProfileTable | not-accessible | current | A table containing port profile entries. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1 | RowsnSwPortProfileEntry | not-accessible | current | An entry in the port profile table. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.1 | ColumnsnSwPortProfileName | read-write | current | Name of the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.2 | ColumnsnSwDhcpSnoopingTrust | read-write | current | Enable dhcp snooping for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.3 | ColumnsnSwDot1x | read-write | current | Enable dot1x for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.4 | ColumnsnSwEgressAcl | read-write | current | Egress ACL the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.5 | ColumnsnSwIngressAcl | read-write | current | Ingress ACL the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.6 | ColumnsnSwIpsg | read-write | current | Set IP Source Guard the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.7 | ColumnsnSwLldpDevNameAndDesc | read-write | current | Set LLDP Device system name the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.8 | ColumnsnSwMacOui | read-write | current | Set MAC-OUI the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.9 | ColumnsnSwMacAuth | read-write | current | Enable MacAuth for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.10 | ColumnsnSwPoeClass | read-write | current | POE class |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.11 | ColumnsnPoeEnable | read-write | current | Enable POE for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.12 | ColumnsnSwPortPrioPoePriority | read-write | current | POE Priority for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.13 | ColumnsnSwPortPrioritySpeed | read-write | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.14 | ColumnsnSwPorts | read-write | current | The InterfaceIndex for port access entry. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.15 | ColumnsnSwProtectedPort | read-write | current | Enable Protected port for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.16 | ColumnsnSwRadius | read-write | current | Radius for the port profile it cannot be 255.255.255.255 or 0.0.0.0. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.17 | ColumnsnSwRstpAdminEdgePort | read-write | current | Enable RSTP admin Edge port for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.18 | ColumnsnSwStpBpduGuard | read-write | current | Enable STP BPDU Guard for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.19 | ColumnsnSwStpRootGuard | read-write | current | Enable STP Root Guard for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.20 | ColumnsnSwTaggedVlans | read-write | current | Tagged VLAN for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.21 | ColumnsnSwUntaggedVlan | read-write | current | UnTagged VLAN for the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.22 | ColumnsnSwPortProfileRowStatus | read-write | current | To create or delete a time profile table entry. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.23 | ColumnsnSwLldpDevNameBeginAndDesc | read-write | current | Set LLDP Device system name Begin and description the port profile. |
| 1.3.6.1.4.1.1991.1.1.3.50.1.1.24 | ColumnsnSwLldpDevNameIncludeAndDesc | read-write | current | Set LLDP Device system name include and description the port profile. |
| 1.3.6.1.4.1.1991.1.1.4 | IdentitysnL4 | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.1.4.1 | NodesnL4Gen | |||
| 1.3.6.1.4.1.1991.1.1.4.1.1 | ScalarsnL4MaxSessionLimit | read-write | current | numbers of maximum session (L4 cache) entries |
| 1.3.6.1.4.1.1991.1.1.4.1.2 | ScalarsnL4TcpSynLimit | read-write | current | Numbers of connection per second |
| 1.3.6.1.4.1.1991.1.1.4.1.3 | ScalarsnL4slbGlobalSDAType | read-write | current | Global Session Distribution Algorithm(SDA) |
| 1.3.6.1.4.1.1991.1.1.4.1.4 | ScalarsnL4slbTotalConnections | read-only | current | Total connections in this device |
| 1.3.6.1.4.1.1991.1.1.4.1.5 | ScalarsnL4slbLimitExceeds | read-only | current | exceeds snL4TCPSynLimit (numbers of connection per second) |
| 1.3.6.1.4.1.1991.1.1.4.1.6 | ScalarsnL4slbForwardTraffic | read-only | current | Client->Server |
| 1.3.6.1.4.1.1991.1.1.4.1.7 | ScalarsnL4slbReverseTraffic | read-only | current | Server->Client |
| 1.3.6.1.4.1.1991.1.1.4.1.8 | ScalarsnL4slbDrops | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.9 | ScalarsnL4slbDangling | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.10 | ScalarsnL4slbDisableCount | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.11 | ScalarsnL4slbAged | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.12 | ScalarsnL4slbFinished | read-only | current | FIN_or_RST |
| 1.3.6.1.4.1.1991.1.1.4.1.13 | ScalarsnL4FreeSessionCount | read-only | current | Maximum sessions - used sessions |
| 1.3.6.1.4.1.1991.1.1.4.1.14 | ScalarsnL4BackupInterface | read-write | current | backup monitoring port |
| 1.3.6.1.4.1.1991.1.1.4.1.15 | ScalarsnL4BackupMacAddr | read-write | current | Associated MAC address for backup monitoring port |
| 1.3.6.1.4.1.1991.1.1.4.1.16 | ScalarsnL4Active | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.17 | ScalarsnL4Redundancy | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.18 | ScalarsnL4Backup | read-only | current | true->StandBy,false->active |
| 1.3.6.1.4.1.1991.1.1.4.1.19 | ScalarsnL4BecomeActive | read-only | current | How many times this device become active |
| 1.3.6.1.4.1.1991.1.1.4.1.20 | ScalarsnL4BecomeStandBy | read-only | current | How many times this device become standby |
| 1.3.6.1.4.1.1991.1.1.4.1.21 | ScalarsnL4BackupState | read-only | current | Backup state |
| 1.3.6.1.4.1.1991.1.1.4.1.22 | ScalarsnL4NoPDUSent | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.23 | ScalarsnL4NoPDUCount | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.24 | ScalarsnL4NoPortMap | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.1.25 | ScalarsnL4unsuccessfulConn | read-only | current | Unsuccessfull connection |
| 1.3.6.1.4.1.1991.1.1.4.1.26 | ScalarsnL4PingInterval | read-write | current | Ping retries interval |
| 1.3.6.1.4.1.1991.1.1.4.1.27 | ScalarsnL4PingRetry | read-write | current | Ping retries attempts |
| 1.3.6.1.4.1.1991.1.1.4.1.28 | ScalarsnL4TcpAge | read-write | current | TCP reset age |
| 1.3.6.1.4.1.1991.1.1.4.1.29 | ScalarsnL4UdpAge | read-write | current | UDP reset age |
| 1.3.6.1.4.1.1991.1.1.4.1.30 | ScalarsnL4EnableMaxSessionLimitReachedTrap | read-write | current | Enable/disable maximum number of connections reached trap. |
| 1.3.6.1.4.1.1991.1.1.4.1.31 | ScalarsnL4EnableTcpSynLimitReachedTrap | read-write | current | Enable/disable the number of TCP SYN limits reached trap. |
| 1.3.6.1.4.1.1991.1.1.4.1.32 | ScalarsnL4EnableRealServerUpTrap | read-write | current | Enable/disable the real server up trap. |
| 1.3.6.1.4.1.1991.1.1.4.1.33 | ScalarsnL4EnableRealServerDownTrap | read-write | current | Enable/disable the real server down trap. |
| 1.3.6.1.4.1.1991.1.1.4.1.34 | ScalarsnL4EnableRealServerPortUpTrap | read-write | current | Enable/disable the real server TCP port up trap. |
| 1.3.6.1.4.1.1991.1.1.4.1.35 | ScalarsnL4EnableRealServerPortDownTrap | read-write | current | Enable/disable the real server TCP port down trap. |
| 1.3.6.1.4.1.1991.1.1.4.1.36 | ScalarsnL4EnableRealServerMaxConnLimitReachedTrap | read-write | current | Enable/disable the real server maximum number of connections reached trap. |
| 1.3.6.1.4.1.1991.1.1.4.1.37 | ScalarsnL4EnableBecomeStandbyTrap | read-write | current | Enable/disable trap of the server load balancing switch changes state from active to standby. |
| 1.3.6.1.4.1.1991.1.1.4.1.38 | ScalarsnL4EnableBecomeActiveTrap | read-write | current | Enable/disable trap of the server load balancing switch changes state from standby to active. |
| 1.3.6.1.4.1.1991.1.1.4.1.39 | ScalarsnL4slbRouterInterfacePortMask | read-write | deprecated | Router interface port mask. (It was obsoleted after release 07100, replaced by snL4slbRouterInterfacePortList) |
| 1.3.6.1.4.1.1991.1.1.4.1.40 | ScalarsnL4MaxNumWebCacheGroup | read-only | current | The maximum number of server cache groups |
| 1.3.6.1.4.1.1991.1.1.4.1.41 | ScalarsnL4MaxNumWebCachePerGroup | read-only | current | The maximum number of WEB Cache servers in each of web cache group |
| 1.3.6.1.4.1.1991.1.1.4.1.42 | ScalarsnL4WebCacheStateful | read-write | current | The WEB Cache servers cache-stateful |
| 1.3.6.1.4.1.1991.1.1.4.1.43 | ScalarsnL4EnableGslbHealthCheckIpUpTrap | read-write | current | Health check IP up. |
| 1.3.6.1.4.1.1991.1.1.4.1.44 | ScalarsnL4EnableGslbHealthCheckIpDownTrap | read-write | current | Health check IP down. |
| 1.3.6.1.4.1.1991.1.1.4.1.45 | ScalarsnL4EnableGslbHealthCheckIpPortUpTrap | read-write | current | Health check IP port up. |
| 1.3.6.1.4.1.1991.1.1.4.1.46 | ScalarsnL4EnableGslbHealthCheckIpPortDownTrap | read-write | current | Health check IP port down. |
| 1.3.6.1.4.1.1991.1.1.4.1.47 | ScalarsnL4EnableGslbRemoteGslbSiDownTrap | read-write | current | Connection to GSLB ServerIron is down. |
| 1.3.6.1.4.1.1991.1.1.4.1.48 | ScalarsnL4EnableGslbRemoteGslbSiUpTrap | read-write | current | Connection to GSLB ServerIron is up. |
| 1.3.6.1.4.1.1991.1.1.4.1.49 | ScalarsnL4EnableGslbRemoteSiDownTrap | read-write | current | GSLB connection to remote ServerIron is down. |
| 1.3.6.1.4.1.1991.1.1.4.1.50 | ScalarsnL4EnableGslbRemoteSiUpTrap | read-write | current | GSLB connection to remote ServerIron is up. |
| 1.3.6.1.4.1.1991.1.1.4.1.51 | ScalarsnL4slbRouterInterfacePortList | read-write | current | Router interface port list. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. |
| 1.3.6.1.4.1.1991.1.1.4.2 | NodesnL4VirtualServer | |||
| 1.3.6.1.4.1.1991.1.1.4.2.1 | TablesnL4VirtualServerTable | not-accessible | current | Virtual Server table. |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1 | RowsnL4VirtualServerEntry | not-accessible | current | An entry in L4 Virtual Server table. |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1.1 | ColumnsnL4VirtualServerIndex | read-only | current | The table index for a Virtual Server entry. |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1.2 | ColumnsnL4VirtualServerName | read-write | current | Virtual server name. |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1.3 | ColumnsnL4VirtualServerVirtualIP | read-write | current | Virtual Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1.4 | ColumnsnL4VirtualServerAdminStatus | read-write | current | Virtual Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1.5 | ColumnsnL4VirtualServerSDAType | read-write | current | TCP/UDP Sessions Distribution Algorithms Type. |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1.6 | ColumnsnL4VirtualServerRowStatus | read-write | current | To create or delete a virtual server entry. |
| 1.3.6.1.4.1.1991.1.1.4.2.1.1.7 | ColumnsnL4VirtualServerDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.3 | NodesnL4RealServer | |||
| 1.3.6.1.4.1.1991.1.1.4.3.1 | TablesnL4RealServerTable | not-accessible | current | Real Server table. |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1 | RowsnL4RealServerEntry | not-accessible | current | An entry in the Real Server table. |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.1 | ColumnsnL4RealServerIndex | read-only | current | The table index for a Real Server entry. |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.2 | ColumnsnL4RealServerName | read-write | current | Real server name. |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.3 | ColumnsnL4RealServerIP | read-write | current | Real Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.4 | ColumnsnL4RealServerAdminStatus | read-write | current | Real Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.5 | ColumnsnL4RealServerMaxConnections | read-write | current | Real Server Maximum Connection allowed. |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.6 | ColumnsnL4RealServerWeight | read-write | current | Real Server weight |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.7 | ColumnsnL4RealServerRowStatus | read-write | current | To create or delete a real server entry. |
| 1.3.6.1.4.1.1991.1.1.4.3.1.1.8 | ColumnsnL4RealServerDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.4 | NodesnL4VirtualServerPort | |||
| 1.3.6.1.4.1.1991.1.1.4.4.1 | TablesnL4VirtualServerPortTable | not-accessible | current | Virtual Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1 | RowsnL4VirtualServerPortEntry | not-accessible | current | An entry in the Virtual Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.1 | ColumnsnL4VirtualServerPortIndex | read-only | current | The index for Virtual Server Port entry. |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.2 | ColumnsnL4VirtualServerPortServerName | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.3 | ColumnsnL4VirtualServerPortPort | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.4 | ColumnsnL4VirtualServerPortAdminStatus | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.5 | ColumnsnL4VirtualServerPortSticky | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.6 | ColumnsnL4VirtualServerPortConcurrent | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.7 | ColumnsnL4VirtualServerPortRowStatus | read-write | current | To create or delete a virtual server port entry. |
| 1.3.6.1.4.1.1991.1.1.4.4.1.1.8 | ColumnsnL4VirtualServerPortDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.5 | NodesnL4RealServerPort | |||
| 1.3.6.1.4.1.1991.1.1.4.5.1 | TablesnL4RealServerPortTable | not-accessible | current | Real Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.5.1.1 | RowsnL4RealServerPortEntry | not-accessible | current | An entry in the Real Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.5.1.1.1 | ColumnsnL4RealServerPortIndex | read-only | current | The index for Real Server Port entry. |
| 1.3.6.1.4.1.1991.1.1.4.5.1.1.2 | ColumnsnL4RealServerPortServerName | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.5.1.1.3 | ColumnsnL4RealServerPortPort | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.5.1.1.4 | ColumnsnL4RealServerPortAdminStatus | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.5.1.1.5 | ColumnsnL4RealServerPortRowStatus | read-write | current | To create or delete a Real server port entry. |
| 1.3.6.1.4.1.1991.1.1.4.5.1.1.6 | ColumnsnL4RealServerPortDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.6 | NodesnL4Bind | |||
| 1.3.6.1.4.1.1991.1.1.4.6.1 | TablesnL4BindTable | not-accessible | current | Bind table. |
| 1.3.6.1.4.1.1991.1.1.4.6.1.1 | RowsnL4BindEntry | not-accessible | current | An entry in the Bind table. |
| 1.3.6.1.4.1.1991.1.1.4.6.1.1.1 | ColumnsnL4BindIndex | read-only | current | The index for Bind entry. |
| 1.3.6.1.4.1.1991.1.1.4.6.1.1.2 | ColumnsnL4BindVirtualServerName | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.6.1.1.3 | ColumnsnL4BindVirtualPortNumber | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.6.1.1.4 | ColumnsnL4BindRealServerName | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.6.1.1.5 | ColumnsnL4BindRealPortNumber | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.6.1.1.6 | ColumnsnL4BindRowStatus | read-write | current | To create or delete bind entry. |
| 1.3.6.1.4.1.1991.1.1.4.7 | NodesnL4VirtualServerStatus | |||
| 1.3.6.1.4.1.1991.1.1.4.7.1 | TablesnL4VirtualServerStatusTable | not-accessible | current | Virtual Server Status table. |
| 1.3.6.1.4.1.1991.1.1.4.7.1.1 | RowsnL4VirtualServerStatusEntry | not-accessible | current | An entry in L4 Virtual Server Status table. |
| 1.3.6.1.4.1.1991.1.1.4.7.1.1.1 | ColumnsnL4VirtualServerStatusIndex | read-only | current | The table index for a Virtual Server Status entry. |
| 1.3.6.1.4.1.1991.1.1.4.7.1.1.2 | ColumnsnL4VirtualServerStatusName | read-only | current | Virtual server name. |
| 1.3.6.1.4.1.1991.1.1.4.7.1.1.3 | ColumnsnL4VirtualServerStatusReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.7.1.1.4 | ColumnsnL4VirtualServerStatusTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.7.1.1.5 | ColumnsnL4VirtualServerStatusTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8 | NodesnL4RealServerStatus | |||
| 1.3.6.1.4.1.1991.1.1.4.8.1 | TablesnL4RealServerStatusTable | not-accessible | current | Real Server Status table. |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1 | RowsnL4RealServerStatusEntry | not-accessible | current | An entry in the Real Server Status table. |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.1 | ColumnsnL4RealServerStatusIndex | read-only | current | The table index for a Real Server Status entry. |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.2 | ColumnsnL4RealServerStatusName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.3 | ColumnsnL4RealServerStatusRealIP | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.4 | ColumnsnL4RealServerStatusReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.5 | ColumnsnL4RealServerStatusTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.6 | ColumnsnL4RealServerStatusCurConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.7 | ColumnsnL4RealServerStatusTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.8 | ColumnsnL4RealServerStatusAge | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.9 | ColumnsnL4RealServerStatusState | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.10 | ColumnsnL4RealServerStatusReassignments | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.11 | ColumnsnL4RealServerStatusReassignmentLimit | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.12 | ColumnsnL4RealServerStatusFailedPortExists | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.13 | ColumnsnL4RealServerStatusFailTime | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.8.1.1.14 | ColumnsnL4RealServerStatusPeakConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.9 | NodesnL4VirtualServerPortStatus | |||
| 1.3.6.1.4.1.1991.1.1.4.9.1 | TablesnL4VirtualServerPortStatusTable | not-accessible | current | Virtual Server Port Status table. |
| 1.3.6.1.4.1.1991.1.1.4.9.1.1 | RowsnL4VirtualServerPortStatusEntry | not-accessible | current | An entry in the Virtual Server Port Status table. |
| 1.3.6.1.4.1.1991.1.1.4.9.1.1.1 | ColumnsnL4VirtualServerPortStatusIndex | read-only | current | The index for Virtual Server Port Status entry. |
| 1.3.6.1.4.1.1991.1.1.4.9.1.1.2 | ColumnsnL4VirtualServerPortStatusPort | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.9.1.1.3 | ColumnsnL4VirtualServerPortStatusServerName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.9.1.1.4 | ColumnsnL4VirtualServerPortStatusCurrentConnection | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.9.1.1.5 | ColumnsnL4VirtualServerPortStatusTotalConnection | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.9.1.1.6 | ColumnsnL4VirtualServerPortStatusPeakConnection | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.10 | NodesnL4RealServerPortStatus | |||
| 1.3.6.1.4.1.1991.1.1.4.10.1 | TablesnL4RealServerPortStatusTable | not-accessible | current | Real Server Port Status table. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1 | RowsnL4RealServerPortStatusEntry | not-accessible | current | An entry in the Real Server Port Status table. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.1 | ColumnsnL4RealServerPortStatusIndex | read-only | current | The index for Real Server Port Status entry. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.2 | ColumnsnL4RealServerPortStatusPort | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.3 | ColumnsnL4RealServerPortStatusServerName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.4 | ColumnsnL4RealServerPortStatusReassignCount | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.5 | ColumnsnL4RealServerPortStatusState | read-only | current | Real server port state |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.6 | ColumnsnL4RealServerPortStatusFailTime | read-only | current | Only useful, if real server port state is failed. Indicating how seconds has been elapsed from the last retry. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.7 | ColumnsnL4RealServerPortStatusCurrentConnection | read-only | current | Real server port current connection |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.8 | ColumnsnL4RealServerPortStatusTotalConnection | read-only | current | Real server port total connection |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.9 | ColumnsnL4RealServerPortStatusRxPkts | read-only | current | Real server port receive packets. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.10 | ColumnsnL4RealServerPortStatusTxPkts | read-only | current | Real server port transmit packets. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.11 | ColumnsnL4RealServerPortStatusRxBytes | read-only | current | Real server port receive bytes. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.12 | ColumnsnL4RealServerPortStatusTxBytes | read-only | current | Real server port transmit bytes. |
| 1.3.6.1.4.1.1991.1.1.4.10.1.1.13 | ColumnsnL4RealServerPortStatusPeakConnection | read-only | current | peak connection for real server port. |
| 1.3.6.1.4.1.1991.1.1.4.11 | NodesnL4Policy | |||
| 1.3.6.1.4.1.1991.1.1.4.11.1 | TablesnL4PolicyTable | not-accessible | current | L4 policy table. |
| 1.3.6.1.4.1.1991.1.1.4.11.1.1 | RowsnL4PolicyEntry | not-accessible | current | An entry of the L4 policy table. |
| 1.3.6.1.4.1.1991.1.1.4.11.1.1.1 | ColumnsnL4PolicyId | read-only | current | The ID to identify a entry. |
| 1.3.6.1.4.1.1991.1.1.4.11.1.1.2 | ColumnsnL4PolicyPriority | read-write | current | The Stand alone stackable switch L4 Policy Priority values are: normal(0) high(1) cache(2) transparent(3) The BigIron switch L4 Priority values are: level0(0),… |
| 1.3.6.1.4.1.1991.1.1.4.11.1.1.3 | ColumnsnL4PolicyScope | read-write | current | Scope of the local or global. Global automatic apply to all port. Local apply to a port. |
| 1.3.6.1.4.1.1991.1.1.4.11.1.1.4 | ColumnsnL4PolicyProtocol | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.11.1.1.5 | ColumnsnL4PolicyPort | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.11.1.1.6 | ColumnsnL4PolicyRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.4.12 | NodesnL4PolicyPortAccess | |||
| 1.3.6.1.4.1.1991.1.1.4.12.1 | TablesnL4PolicyPortAccessTable | not-accessible | current | ip interface L4 policy access table. |
| 1.3.6.1.4.1.1991.1.1.4.12.1.1 | RowsnL4PolicyPortAccessEntry | not-accessible | current | An entry of the ip interface L4 policy access table. |
| 1.3.6.1.4.1.1991.1.1.4.12.1.1.1 | ColumnsnL4PolicyPortAccessPort | read-only | current | The ip interface to which the L4 policy applies. |
| 1.3.6.1.4.1.1991.1.1.4.12.1.1.2 | ColumnsnL4PolicyPortAccessList | read-write | current | An ip L4 policy list, of which each octet contains a ID number that forms a group of s. A valid entry in the snL4PolicyTable with the corresponding ID number (… |
| 1.3.6.1.4.1.1991.1.1.4.12.1.1.3 | ColumnsnL4PolicyPortAccessRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.1.4.13 | NodesnL4Trap | |||
| 1.3.6.1.4.1.1991.1.1.4.13.1 | ScalarsnL4TrapRealServerIP | read-only | current | Real server IP address. |
| 1.3.6.1.4.1.1991.1.1.4.13.2 | ScalarsnL4TrapRealServerName | read-only | current | Real server name. |
| 1.3.6.1.4.1.1991.1.1.4.13.3 | ScalarsnL4TrapRealServerPort | read-only | current | Transport protocol port number of the real server. |
| 1.3.6.1.4.1.1991.1.1.4.13.4 | ScalarsnL4TrapRealServerCurConnections | read-only | current | Real Server current connections. |
| 1.3.6.1.4.1.1991.1.1.4.13.5 | ScalarsnL4TrapLinkName | read-only | current | Link name. |
| 1.3.6.1.4.1.1991.1.1.4.13.6 | ScalarsnL4LinkVirtualInterface | read-only | current | Link virtual interface. |
| 1.3.6.1.4.1.1991.1.1.4.14 | NodesnL4WebCache | |||
| 1.3.6.1.4.1.1991.1.1.4.14.1 | TablesnL4WebCacheTable | not-accessible | current | Real Server table. |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1 | RowsnL4WebCacheEntry | not-accessible | current | An entry in the Real Server table. |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1.1 | ColumnsnL4WebCacheIP | read-only | current | Real Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1.2 | ColumnsnL4WebCacheName | read-write | current | Real server name. |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1.3 | ColumnsnL4WebCacheAdminStatus | read-write | current | Real Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1.4 | ColumnsnL4WebCacheMaxConnections | read-write | current | Real Server Maximum Connection allowed. |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1.5 | ColumnsnL4WebCacheWeight | read-write | current | Real Server weight |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1.6 | ColumnsnL4WebCacheRowStatus | read-write | current | To create or delete a real server entry. |
| 1.3.6.1.4.1.1991.1.1.4.14.1.1.7 | ColumnsnL4WebCacheDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.15 | NodesnL4WebCacheGroup | |||
| 1.3.6.1.4.1.1991.1.1.4.15.1 | TablesnL4WebCacheGroupTable | not-accessible | current | Web Cache Group table. |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1 | RowsnL4WebCacheGroupEntry | not-accessible | current | An entry in the Web Cache Group table. |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1.1 | ColumnsnL4WebCacheGroupId | read-only | current | The identification for a Web Cache Group entry. The limit is from 1 to snL4MaxNumWebCacheGroup. |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1.2 | ColumnsnL4WebCacheGroupName | read-write | current | Web Cache Group name. |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1.3 | ColumnsnL4WebCacheGroupWebCacheIpList | read-write | current | A list of the Server Cache Group Real Server IP Address. The number of IP Address is from 1 (4 OCTETs) to the snL4MaxNumServersPerWebCacheGroup, maximum number… |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1.4 | ColumnsnL4WebCacheGroupDestMask | read-write | current | Cache Server Group Destination Mask. |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1.5 | ColumnsnL4WebCacheGroupSrcMask | read-write | current | Cache Server Group Source Mask. |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1.6 | ColumnsnL4WebCacheGroupAdminStatus | read-write | current | The WEB Cache Group is set either enabled(1)...........activated. disabled(0)..........disabled. |
| 1.3.6.1.4.1.1991.1.1.4.15.1.1.7 | ColumnsnL4WebCacheGroupRowStatus | read-write | current | To create or delete a Web Cache Group entry. |
| 1.3.6.1.4.1.1991.1.1.4.16 | NodesnL4WebCacheTrafficStats | |||
| 1.3.6.1.4.1.1991.1.1.4.16.1 | TablesnL4WebCacheTrafficStatsTable | not-accessible | current | Web Cache Traffic Statistics table. |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1 | RowsnL4WebCacheTrafficStatsEntry | not-accessible | current | An entry in the Web Cache Traffic Statistics table. |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.1 | ColumnsnL4WebCacheTrafficIp | read-only | current | Cache Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.2 | ColumnsnL4WebCacheTrafficPort | read-only | current | The WEB Cache port is one of the protocol port such as UDP, TCP etc. |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.3 | ColumnsnL4WebCacheCurrConnections | read-only | current | Number of the current connections in WEB Cache group. |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.4 | ColumnsnL4WebCacheTotalConnections | read-only | current | The total connections in WEB Cache group. |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.5 | ColumnsnL4WebCacheTxPkts | read-only | current | Number of the Packets sending from Client/Web-Server to Cache Server |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.6 | ColumnsnL4WebCacheRxPkts | read-only | current | Number of the Packets sending from Cache Server to Client/Web-Server |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.7 | ColumnsnL4WebCacheTxOctets | read-only | current | Number of the Octets sending from Client/Web-Server to Cache Server |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.8 | ColumnsnL4WebCacheRxOctets | read-only | current | Number of the Octets sending from Cache Server to Client/Web-Server |
| 1.3.6.1.4.1.1991.1.1.4.16.1.1.9 | ColumnsnL4WebCachePortState | read-only | current | Web Cache Port state. |
| 1.3.6.1.4.1.1991.1.1.4.17 | NodesnL4WebUncachedTrafficStats | |||
| 1.3.6.1.4.1.1991.1.1.4.17.1 | TablesnL4WebUncachedTrafficStatsTable | not-accessible | current | Web Uncached Traffic Statistics table. |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1 | RowsnL4WebUncachedTrafficStatsEntry | not-accessible | current | An entry in the Web Uncached Traffic Statistics table. |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.1 | ColumnsnL4WebServerPort | read-only | current | Web Server Port. |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.2 | ColumnsnL4WebClientPort | read-only | current | Web Client Port. |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.3 | ColumnsnL4WebUncachedTxPkts | read-only | current | Number of the Packets sending from Client port to Web Server port |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.4 | ColumnsnL4WebUncachedRxPkts | read-only | current | Number of the Packets sending from Web Server port to Client port |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.5 | ColumnsnL4WebUncachedTxOctets | read-only | current | Number of the Octets sending from Client port to Web Server port |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.6 | ColumnsnL4WebUncachedRxOctets | read-only | current | Number of the Octets sending from Web Server port to Client port |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.7 | ColumnsnL4WebServerPortName | read-only | current | Web Server Port Name string. |
| 1.3.6.1.4.1.1991.1.1.4.17.1.1.8 | ColumnsnL4WebClientPortName | read-only | current | Web Client Port Name string. |
| 1.3.6.1.4.1.1991.1.1.4.18 | NodesnL4WebCachePort | |||
| 1.3.6.1.4.1.1991.1.1.4.18.1 | TablesnL4WebCachePortTable | not-accessible | current | Real Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.18.1.1 | RowsnL4WebCachePortEntry | not-accessible | current | An entry in the Real Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.18.1.1.1 | ColumnsnL4WebCachePortServerIp | read-only | current | Cache Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.18.1.1.2 | ColumnsnL4WebCachePortPort | read-only | current | The WEB Cache port is one of the protocol port such as UDP, TCP etc. |
| 1.3.6.1.4.1.1991.1.1.4.18.1.1.3 | ColumnsnL4WebCachePortAdminStatus | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.18.1.1.4 | ColumnsnL4WebCachePortRowStatus | read-write | current | To create or delete a Real server port entry. |
| 1.3.6.1.4.1.1991.1.1.4.18.1.1.5 | ColumnsnL4WebCachePortDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.19 | NodesnL4RealServerCfg | |||
| 1.3.6.1.4.1.1991.1.1.4.19.1 | TablesnL4RealServerCfgTable | not-accessible | current | Real Server table. |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1 | RowsnL4RealServerCfgEntry | not-accessible | current | An entry in the Real Server table. |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1.1 | ColumnsnL4RealServerCfgIP | read-only | current | Real Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1.2 | ColumnsnL4RealServerCfgName | read-write | current | Real server name. |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1.3 | ColumnsnL4RealServerCfgAdminStatus | read-write | current | Real Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1.4 | ColumnsnL4RealServerCfgMaxConnections | read-write | current | Real Server Maximum Connection allowed. |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1.5 | ColumnsnL4RealServerCfgWeight | read-write | current | Real Server weight |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1.6 | ColumnsnL4RealServerCfgRowStatus | read-write | current | To create or delete a real server entry. |
| 1.3.6.1.4.1.1991.1.1.4.19.1.1.7 | ColumnsnL4RealServerCfgDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.20 | NodesnL4RealServerPortCfg | |||
| 1.3.6.1.4.1.1991.1.1.4.20.1 | TablesnL4RealServerPortCfgTable | not-accessible | current | Real Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.20.1.1 | RowsnL4RealServerPortCfgEntry | not-accessible | current | An entry in the Real Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.20.1.1.1 | ColumnsnL4RealServerPortCfgIP | read-only | current | The IP address for the Real Server . |
| 1.3.6.1.4.1.1991.1.1.4.20.1.1.2 | ColumnsnL4RealServerPortCfgServerName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.20.1.1.3 | ColumnsnL4RealServerPortCfgPort | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.20.1.1.4 | ColumnsnL4RealServerPortCfgAdminStatus | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.20.1.1.5 | ColumnsnL4RealServerPortCfgRowStatus | read-write | current | To create or delete a Real server port entry. |
| 1.3.6.1.4.1.1991.1.1.4.20.1.1.6 | ColumnsnL4RealServerPortCfgDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.21 | NodesnL4VirtualServerCfg | |||
| 1.3.6.1.4.1.1991.1.1.4.21.1 | TablesnL4VirtualServerCfgTable | not-accessible | current | Virtual Server table. |
| 1.3.6.1.4.1.1991.1.1.4.21.1.1 | RowsnL4VirtualServerCfgEntry | not-accessible | current | An entry in L4 Virtual Server table. |
| 1.3.6.1.4.1.1991.1.1.4.21.1.1.1 | ColumnsnL4VirtualServerCfgVirtualIP | read-only | current | Virtual Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.21.1.1.2 | ColumnsnL4VirtualServerCfgName | read-write | current | Virtual server name. |
| 1.3.6.1.4.1.1991.1.1.4.21.1.1.3 | ColumnsnL4VirtualServerCfgAdminStatus | read-write | current | Virtual Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.1991.1.1.4.21.1.1.4 | ColumnsnL4VirtualServerCfgSDAType | read-write | current | TCP/UDP Sessions Distribution Algorithms Type. |
| 1.3.6.1.4.1.1991.1.1.4.21.1.1.5 | ColumnsnL4VirtualServerCfgRowStatus | read-write | current | To create or delete a virtual server entry. |
| 1.3.6.1.4.1.1991.1.1.4.21.1.1.6 | ColumnsnL4VirtualServerCfgDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.22 | NodesnL4VirtualServerPortCfg | |||
| 1.3.6.1.4.1.1991.1.1.4.22.1 | TablesnL4VirtualServerPortCfgTable | not-accessible | current | Virtual Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1 | RowsnL4VirtualServerPortCfgEntry | not-accessible | current | An entry in the Virtual Server Port table. |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.1 | ColumnsnL4VirtualServerPortCfgIP | read-only | current | Virtual Server IP Address. |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.2 | ColumnsnL4VirtualServerPortCfgPort | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.3 | ColumnsnL4VirtualServerPortCfgServerName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.4 | ColumnsnL4VirtualServerPortCfgAdminStatus | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.5 | ColumnsnL4VirtualServerPortCfgSticky | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.6 | ColumnsnL4VirtualServerPortCfgConcurrent | read-write | current | |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.7 | ColumnsnL4VirtualServerPortCfgRowStatus | read-write | current | To create or delete a virtual server port entry. |
| 1.3.6.1.4.1.1991.1.1.4.22.1.1.8 | ColumnsnL4VirtualServerPortCfgDeleteState | read-only | current | Delete operation state. |
| 1.3.6.1.4.1.1991.1.1.4.23 | NodesnL4RealServerStatistic | |||
| 1.3.6.1.4.1.1991.1.1.4.23.1 | TablesnL4RealServerStatisticTable | not-accessible | current | Real Server Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1 | RowsnL4RealServerStatisticEntry | not-accessible | current | An entry in the Real Server Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.1 | ColumnsnL4RealServerStatisticRealIP | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.2 | ColumnsnL4RealServerStatisticName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.3 | ColumnsnL4RealServerStatisticReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.4 | ColumnsnL4RealServerStatisticTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.5 | ColumnsnL4RealServerStatisticCurConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.6 | ColumnsnL4RealServerStatisticTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.7 | ColumnsnL4RealServerStatisticAge | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.8 | ColumnsnL4RealServerStatisticState | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.9 | ColumnsnL4RealServerStatisticReassignments | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.10 | ColumnsnL4RealServerStatisticReassignmentLimit | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.11 | ColumnsnL4RealServerStatisticFailedPortExists | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.12 | ColumnsnL4RealServerStatisticFailTime | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.23.1.1.13 | ColumnsnL4RealServerStatisticPeakConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.24 | NodesnL4RealServerPortStatistic | |||
| 1.3.6.1.4.1.1991.1.1.4.24.1 | TablesnL4RealServerPortStatisticTable | not-accessible | current | Real Server Port Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1 | RowsnL4RealServerPortStatisticEntry | not-accessible | current | An entry in the Real Server Port Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.1 | ColumnsnL4RealServerPortStatisticIP | read-only | current | The index for Real Server Port Statistic entry. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.2 | ColumnsnL4RealServerPortStatisticPort | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.3 | ColumnsnL4RealServerPortStatisticServerName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.4 | ColumnsnL4RealServerPortStatisticReassignCount | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.5 | ColumnsnL4RealServerPortStatisticState | read-only | current | Real server port state |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.6 | ColumnsnL4RealServerPortStatisticFailTime | read-only | current | Only useful, if real server port state is failed. Indicating how seconds has been elapsed from the last retry. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.7 | ColumnsnL4RealServerPortStatisticCurrentConnection | read-only | current | Real server port current connection |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.8 | ColumnsnL4RealServerPortStatisticTotalConnection | read-only | current | Real server port total connection |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.9 | ColumnsnL4RealServerPortStatisticRxPkts | read-only | current | Real server port receive packets. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.10 | ColumnsnL4RealServerPortStatisticTxPkts | read-only | current | Real server port transmit packets. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.11 | ColumnsnL4RealServerPortStatisticRxBytes | read-only | current | Real server port receive bytes. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.12 | ColumnsnL4RealServerPortStatisticTxBytes | read-only | current | Real server port transmit bytes. |
| 1.3.6.1.4.1.1991.1.1.4.24.1.1.13 | ColumnsnL4RealServerPortStatisticPeakConnection | read-only | current | peak connection for real server port. |
| 1.3.6.1.4.1.1991.1.1.4.25 | NodesnL4VirtualServerStatistic | |||
| 1.3.6.1.4.1.1991.1.1.4.25.1 | TablesnL4VirtualServerStatisticTable | not-accessible | current | Virtual Server Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1 | RowsnL4VirtualServerStatisticEntry | not-accessible | current | An entry in L4 Virtual Server Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.1 | ColumnsnL4VirtualServerStatisticIP | read-only | current | The table index for a Virtual Server Statistic entry. |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.2 | ColumnsnL4VirtualServerStatisticName | read-only | current | Virtual server name. |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.3 | ColumnsnL4VirtualServerStatisticReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.4 | ColumnsnL4VirtualServerStatisticTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.5 | ColumnsnL4VirtualServerStatisticTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.6 | ColumnsnL4VirtualServerStatisticReceiveBytes | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.7 | ColumnsnL4VirtualServerStatisticTransmitBytes | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.8 | ColumnsnL4VirtualServerStatisticSymmetricState | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.9 | ColumnsnL4VirtualServerStatisticSymmetricPriority | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.10 | ColumnsnL4VirtualServerStatisticSymmetricKeep | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.11 | ColumnsnL4VirtualServerStatisticSymmetricActivates | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.12 | ColumnsnL4VirtualServerStatisticSymmetricInactives | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.13 | ColumnsnL4VirtualServerStatisticSymmetricBestStandbyMacAddr | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.25.1.1.14 | ColumnsnL4VirtualServerStatisticSymmetricActiveMacAddr | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.26 | NodesnL4VirtualServerPortStatistic | |||
| 1.3.6.1.4.1.1991.1.1.4.26.1 | TablesnL4VirtualServerPortStatisticTable | not-accessible | current | Virtual Server Port Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.26.1.1 | RowsnL4VirtualServerPortStatisticEntry | not-accessible | current | An entry in the Virtual Server Port Statistic table. |
| 1.3.6.1.4.1.1991.1.1.4.26.1.1.1 | ColumnsnL4VirtualServerPortStatisticIP | read-only | current | The index for Virtual Server Port Statistic entry. |
| 1.3.6.1.4.1.1991.1.1.4.26.1.1.2 | ColumnsnL4VirtualServerPortStatisticPort | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.26.1.1.3 | ColumnsnL4VirtualServerPortStatisticServerName | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.26.1.1.4 | ColumnsnL4VirtualServerPortStatisticCurrentConnection | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.26.1.1.5 | ColumnsnL4VirtualServerPortStatisticTotalConnection | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.26.1.1.6 | ColumnsnL4VirtualServerPortStatisticPeakConnection | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.27 | NodesnL4GslbSiteRemoteServerIrons | |||
| 1.3.6.1.4.1.1991.1.1.4.27.1 | TablesnL4GslbSiteRemoteServerIronTable | not-accessible | current | GSLB remote ServerIron configuration table. |
| 1.3.6.1.4.1.1991.1.1.4.27.1.1 | RowsnL4GslbSiteRemoteServerIronEntry | not-accessible | current | An entry of a GSLB remote ServerIron configuration. |
| 1.3.6.1.4.1.1991.1.1.4.27.1.1.1 | ColumnsnL4GslbSiteRemoteServerIronIP | read-only | current | The index for each remote ServerIron in a site. |
| 1.3.6.1.4.1.1991.1.1.4.27.1.1.2 | ColumnsnL4GslbSiteRemoteServerIronPreference | read-write | current | The preference of a remote ServerIron. The default value is 128. |
| 1.3.6.1.4.1.1991.1.1.4.28 | NodesnL4History | |||
| 1.3.6.1.4.1.1991.1.1.4.28.1 | TablesnL4RealServerHistoryControlTable | not-accessible | current | A list of history control entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1 | RowsnL4RealServerHistoryControlEntry | not-accessible | current | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerHistoryControlInterval object might be named… |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1.1 | ColumnsnL4RealServerHistoryControlIndex | read-only | current | An index that uniquely identifies an entry in the snL4RealServerHistoryControl table.Each such entry defines a set of samples at a particular interval for an i… |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1.2 | ColumnsnL4RealServerHistoryControlDataSource | read-write | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerHist… |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1.3 | ColumnsnL4RealServerHistoryControlBucketsRequested | read-write | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerHisto… |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1.4 | ColumnsnL4RealServerHistoryControlBucketsGranted | read-only | current | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerHistoryCont… |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1.5 | ColumnsnL4RealServerHistoryControlInterval | read-write | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerHistoryContro… |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1.6 | ColumnsnL4RealServerHistoryControlOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.1991.1.1.4.28.1.1.7 | ColumnsnL4RealServerHistoryControlStatus | read-write | current | The status of this snL4RealServerHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerHistoryControlEntry will be… |
| 1.3.6.1.4.1.1991.1.1.4.28.2 | TablesnL4RealServerHistoryTable | not-accessible | current | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1 | RowsnL4RealServerHistoryEntry | not-accessible | current | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4RealServerHistoryControlEntry which set … |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.1 | ColumnsnL4RealServerHistoryIndex | read-only | current | The snL4RealServerHistory of which this entry is a part.The snL4RealServerHistory identified by a particular value of this index is the same snL4RealServerHist… |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.2 | ColumnsnL4RealServerHistorySampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4RealServerHistoryControlEntry. Thi… |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.3 | ColumnsnL4RealServerHistoryIntervalStart | read-only | current | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.4 | ColumnsnL4RealServerHistoryReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.5 | ColumnsnL4RealServerHistoryTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.6 | ColumnsnL4RealServerHistoryTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.7 | ColumnsnL4RealServerHistoryCurConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.8 | ColumnsnL4RealServerHistoryPeakConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.2.1.9 | ColumnsnL4RealServerHistoryReassignments | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.3 | TablesnL4RealServerPortHistoryControlTable | not-accessible | current | A list of history control entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1 | RowsnL4RealServerPortHistoryControlEntry | not-accessible | current | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerPortHistoryControlInterval object might be n… |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1.1 | ColumnsnL4RealServerPortHistoryControlIndex | read-only | current | An index that uniquely identifies an entry in the snL4RealServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval for … |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1.2 | ColumnsnL4RealServerPortHistoryControlDataSource | read-write | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerPort… |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1.3 | ColumnsnL4RealServerPortHistoryControlBucketsRequested | read-write | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerPortH… |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1.4 | ColumnsnL4RealServerPortHistoryControlBucketsGranted | read-only | current | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerPortHistory… |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1.5 | ColumnsnL4RealServerPortHistoryControlInterval | read-write | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerPortHistoryCo… |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1.6 | ColumnsnL4RealServerPortHistoryControlOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.1991.1.1.4.28.3.1.7 | ColumnsnL4RealServerPortHistoryControlStatus | read-write | current | The status of this snL4RealServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerPortHistoryControlEntry… |
| 1.3.6.1.4.1.1991.1.1.4.28.4 | TablesnL4RealServerPortHistoryTable | not-accessible | current | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1 | RowsnL4RealServerPortHistoryEntry | not-accessible | current | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4RealServerPortHistoryControlEntry which … |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.1 | ColumnsnL4RealServerPortHistoryIndex | read-only | current | The snL4RealServerPortHistory of which this entry is a part.The snL4RealServerPortHistory identified by a particular value of this index is the same snL4RealSe… |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.2 | ColumnsnL4RealServerPortHistorySampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4RealServerPortHistoryControlEntry.… |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.3 | ColumnsnL4RealServerPortHistoryIntervalStart | read-only | current | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.4 | ColumnsnL4RealServerPortHistoryReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.5 | ColumnsnL4RealServerPortHistoryTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.6 | ColumnsnL4RealServerPortHistoryTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.7 | ColumnsnL4RealServerPortHistoryCurConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.8 | ColumnsnL4RealServerPortHistoryPeakConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.4.1.9 | ColumnsnL4RealServerPortHistoryResponseTime | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.5 | TablesnL4VirtualServerHistoryControlTable | not-accessible | current | A list of history control entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1 | RowsnL4VirtualServerHistoryControlEntry | not-accessible | current | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerHistoryControlInterval object might be na… |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1.1 | ColumnsnL4VirtualServerHistoryControlIndex | read-only | current | An index that uniquely identifies an entry in the snL4VirtualServerHistoryControl table.Each such entry defines a set of samples at a particular interval for a… |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1.2 | ColumnsnL4VirtualServerHistoryControlDataSource | read-write | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerH… |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1.3 | ColumnsnL4VirtualServerHistoryControlBucketsRequested | read-write | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerHi… |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1.4 | ColumnsnL4VirtualServerHistoryControlBucketsGranted | read-only | current | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryC… |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1.5 | ColumnsnL4VirtualServerHistoryControlInterval | read-write | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerHistoryCon… |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1.6 | ColumnsnL4VirtualServerHistoryControlOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.1991.1.1.4.28.5.1.7 | ColumnsnL4VirtualServerHistoryControlStatus | read-write | current | The status of this snL4VirtualServerHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerHistoryControlEntry w… |
| 1.3.6.1.4.1.1991.1.1.4.28.6 | TablesnL4VirtualServerHistoryTable | not-accessible | current | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1 | RowsnL4VirtualServerHistoryEntry | not-accessible | current | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4VirtualServerHistoryControlEntry which s… |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.1 | ColumnsnL4VirtualServerHistoryIndex | read-only | current | The snL4VirtualServerHistory of which this entry is a part.The snL4VirtualServerHistory identified by a particular value of this index is the same snL4VirtualS… |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.2 | ColumnsnL4VirtualServerHistorySampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4VirtualServerHistoryControlEntry. … |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.3 | ColumnsnL4VirtualServerHistoryIntervalStart | read-only | current | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.4 | ColumnsnL4VirtualServerHistoryReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.5 | ColumnsnL4VirtualServerHistoryTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.6 | ColumnsnL4VirtualServerHistoryTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.7 | ColumnsnL4VirtualServerHistoryCurConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.6.1.8 | ColumnsnL4VirtualServerHistoryPeakConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.7 | TablesnL4VirtualServerPortHistoryControlTable | not-accessible | current | A list of history control entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1 | RowsnL4VirtualServerPortHistoryControlEntry | not-accessible | current | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerPortHistoryControlInterval object might b… |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1.1 | ColumnsnL4VirtualServerPortHistoryControlIndex | read-only | current | An index that uniquely identifies an entry in the snL4VirtualServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval f… |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1.2 | ColumnsnL4VirtualServerPortHistoryControlDataSource | read-write | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerP… |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1.3 | ColumnsnL4VirtualServerPortHistoryControlBucketsRequested | read-write | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerPo… |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1.4 | ColumnsnL4VirtualServerPortHistoryControlBucketsGranted | read-only | current | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerPortHist… |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1.5 | ColumnsnL4VirtualServerPortHistoryControlInterval | read-write | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerPortHistor… |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1.6 | ColumnsnL4VirtualServerPortHistoryControlOwner | read-write | current | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.1991.1.1.4.28.7.1.7 | ColumnsnL4VirtualServerPortHistoryControlStatus | read-write | current | The status of this snL4VirtualServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerPortHistoryContro… |
| 1.3.6.1.4.1.1991.1.1.4.28.8 | TablesnL4VirtualServerPortHistoryTable | not-accessible | current | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1 | RowsnL4VirtualServerPortHistoryEntry | not-accessible | current | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4VirtualServerPortHistoryControlEntry whi… |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.1 | ColumnsnL4VirtualServerPortHistoryIndex | read-only | current | The snL4VirtualServerPortHistory of which this entry is a part.The snL4VirtualServerPortHistory identified by a particular value of this index is the same snL4… |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.2 | ColumnsnL4VirtualServerPortHistorySampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4VirtualServerPortHistoryControlEnt… |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.3 | ColumnsnL4VirtualServerPortHistoryIntervalStart | read-only | current | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.4 | ColumnsnL4VirtualServerPortHistoryReceivePkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.5 | ColumnsnL4VirtualServerPortHistoryTransmitPkts | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.6 | ColumnsnL4VirtualServerPortHistoryTotalConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.7 | ColumnsnL4VirtualServerPortHistoryCurConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.4.28.8.1.8 | ColumnsnL4VirtualServerPortHistoryPeakConnections | read-only | current | |
| 1.3.6.1.4.1.1991.1.1.5 | NodesnStack | |||
| 1.3.6.1.4.1.1991.1.1.5.1 | NodesnStackGen | |||
| 1.3.6.1.4.1.1991.1.1.5.1.1 | ScalarsnStackPriSwitchMode | read-write | current | The Stackable Management Primary Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........primary switch enabled disabled(… |
| 1.3.6.1.4.1.1991.1.1.5.1.2 | ScalarsnStackMaxSecSwitch | read-only | current | The Maximum Secondary Switches are allowed in the Stackable Management Group. |
| 1.3.6.1.4.1.1991.1.1.5.1.3 | ScalarsnStackTotalSecSwitch | read-only | current | The Total Secondary Switches currently connected to the Stackable Management Group. |
| 1.3.6.1.4.1.1991.1.1.5.1.4 | ScalarsnStackSyncAllSecSwitch | read-write | current | Synchronize all the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).… |
| 1.3.6.1.4.1.1991.1.1.5.1.5 | ScalarsnStackSmSlotIndex | read-write | current | The Slot 0 is the Master slot and Slot 1-8 are slaves. All the slot-based MIB data can be retrieved with respect to this slot index such as snChassis global MI… |
| 1.3.6.1.4.1.1991.1.1.5.1.6 | ScalarsnStackFmpSetProcess | read-only | current | normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state. pending(1) - The pending process is waiting for the result of an FMP-SET. fail… |
| 1.3.6.1.4.1.1991.1.1.5.2 | NodesnStackSecSwitchInfo | |||
| 1.3.6.1.4.1.1991.1.1.5.2.1 | TablesnStackSecSwitchTable | not-accessible | current | If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number o… |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1 | RowsnStackSecSwitchEntry | not-accessible | current | An entry in the Stackable Management Secondary Switch Information table. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.1 | ColumnsnStackSecSwitchIndex | read-only | current | The secondary switch index must not be greater than the snStackMaxSecSwitch. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.2 | ColumnsnStackSecSwitchSlotId | read-write | current | The secondary switch slot ID must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically… |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.3 | ColumnsnStackSecSwitchPortCnts | read-only | current | The number of ports in this secondary switch. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.4 | ColumnsnStackSecSwitchEnabled | read-write | current | The secondary switch has been selected to Stackable Management Group. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.5 | ColumnsnStackSecSwitchAck | read-only | current | The secondary switch has sent reponse to the primary switch. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.6 | ColumnsnStackSecSwitchMacAddr | read-only | current | The secondary switch physical address. The physical address represents a MAC Station. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.7 | ColumnsnStackSecSwitchSyncCmd | read-write | current | Synchronize the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).....… |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.8 | ColumnsnStackSecSwitchIpAddr | read-write | current | The secondary switch IP Address and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.9 | ColumnsnStackSecSwitchSubnetMask | read-write | current | The secondary switch IP Subnet Mask and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.1991.1.1.5.2.1.1.10 | ColumnsnStackSecSwitchCfgCmd | read-write | current | snStackSecSwitchSlotId must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically. auto… |
| 1.3.6.1.4.1.1991.1.1.6 | NodesnSci | |||
| 1.3.6.1.4.1.1991.1.1.7 | NodefdrySntp | |||
| 1.3.6.1.4.1.1991.1.1.8 | NodefdryRadius | |||
| 1.3.6.1.4.1.1991.1.1.8.1 | IdentityfdryRadiusMIB | The Ruckus Wireless proprietary MIB module for Radius Authentication Servers It has new table combines Ipv4 and Ipv6 Radius Authentication Servers configuratio… | ||
| 1.3.6.1.4.1.1991.1.1.8.1.1 | NodefdryRadiusServer | |||
| 1.3.6.1.4.1.1991.1.1.8.1.1.1 | TablefdryRadiusServerTable | not-accessible | current | Radius server table, listing the RADIUS authentication servers |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1 | RowfdryRadiusServerEntry | not-accessible | current | An entry in the Radius server table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The … |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.1 | ColumnfdryRadiusServerIndex | not-accessible | current | The index to the Radius server Table. Maximum 8 Radius servers are supported. |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.2 | ColumnfdryRadiusServerAddrType | read-create | current | Radius server IP address Type. Supported address types are ipv4(1) and ipv6(2) |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.3 | ColumnfdryRadiusServerAddr | read-create | current | Radius server IP address. |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.4 | ColumnfdryRadiusServerAuthPort | read-create | current | Authentication UDP port number. |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.5 | ColumnfdryRadiusServerAcctPort | read-create | current | Account UDP port number. |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.6 | ColumnfdryRadiusServerRowKey | read-create | current | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.7 | ColumnfdryRadiusServerUsage | read-create | current | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.8 | ColumnfdryRadiusServerRowStatus | read-create | current | This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified … |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.9 | ColumnfdryRadiusServerAuthType | read-create | current | To allow this server to support dot1x/mac-auth/web-auth 0 - mac-auth 1 - dot1x 2 - web-auth |
| 1.3.6.1.4.1.1991.1.1.8.1.1.1.1.10 | ColumnfdryRadiusServerPriority | read-create | current | Radius server priority 0-7. |
| 1.3.6.1.4.1.1991.1.1.9 | NodefdryTacacs | |||
| 1.3.6.1.4.1.1991.1.1.9.1 | IdentityfdryTacacsMIB | The Ruckus Wireless proprietary MIB module for Tacacs Authentication Servers It has new table combines Ipv4 and Ipv6 Tacacs Authentication Servers configuratio… | ||
| 1.3.6.1.4.1.1991.1.1.9.1.1 | NodefdryTacacsServer | |||
| 1.3.6.1.4.1.1991.1.1.9.1.1.1 | TablefdryTacacsServerTable | not-accessible | current | Tacacs server table, listing the Tacacs authentication servers |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1 | RowfdryTacacsServerEntry | not-accessible | current | An entry in the Tacacs server table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The … |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1.1 | ColumnfdryTacacsServerIndex | not-accessible | current | The index to the Tacacs server Table, Maximum 8 Tacacs servers are supported. |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1.2 | ColumnfdryTacacsServerAddrType | read-create | current | Tacacs server IP address Type. Supported address types are ipv4(1) and ipv6(2) |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1.3 | ColumnfdryTacacsServerAddr | read-create | current | Tacacs server IP address. |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1.4 | ColumnfdryTacacsServerAuthPort | read-create | current | Authentication UDP port number. |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1.5 | ColumnfdryTacacsServerRowKey | read-create | current | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1.6 | ColumnfdryTacacsServerUsage | read-create | current | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.1991.1.1.9.1.1.1.1.7 | ColumnfdryTacacsServerRowStatus | read-create | current | This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified … |
| 1.3.6.1.4.1.1991.1.1.10 | NodefdryTrap | |||
| 1.3.6.1.4.1.1991.1.1.10.1 | IdentityfdryTrapMIB | The Ruckus Wireless proprietary MIB module for Traps. It has new table combines Ipv4 and Ipv6 configuration of trap Receiver/managers which to send traps. Copy… | ||
| 1.3.6.1.4.1.1991.1.1.10.1.1 | NodefdryTrapReceiver | |||
| 1.3.6.1.4.1.1991.1.1.10.1.1.1 | TablefdryTrapReceiverTable | not-accessible | current | Trap Receiver table. |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1 | RowfdryTrapReceiverEntry | not-accessible | current | An entry in the Trap Receiver table. This table uses running index as the Index to the table. Reasons to go for running index Scheme than IP addresses: 1. The … |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.1 | ColumnfdryTrapReceiverIndex | not-accessible | current | The index to the Trap Receiver Table. |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.2 | ColumnfdryTrapReceiverAddrType | read-create | current | Trap Receiver IP address Type. Supported address types are ipv4(1) and ipv6(2) |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.3 | ColumnfdryTrapReceiverAddr | read-create | current | Trap Receiver IP address. |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.4 | ColumnfdryTrapReceiverCommunityOrSecurityName | read-create | current | Community string to use. In case of USM (SNMPv3) security model, this object is used to provide the security name. |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.5 | ColumnfdryTrapReceiverUDPPort | read-create | current | UDP port number of the trap receiver. |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.6 | ColumnfdryTrapReceiverSecurityModel | read-create | current | Version of trap format to be used. |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.7 | ColumnfdryTrapReceiverSecurityLevel | read-create | current | Used for USM (SNMPv3) security model to specify the level of security. The security name is provided by fdryTrapReceiverCommunityOrSecurityName. |
| 1.3.6.1.4.1.1991.1.1.10.1.1.1.1.8 | ColumnfdryTrapReceiverRowStatus | read-create | current | This variable is used to create, modify, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified … |
| 1.3.6.1.4.1.1991.1.1.11 | NodebrcdSysLog | |||
| 1.3.6.1.4.1.1991.1.1.12 | NodebrcdMct | |||
| 1.3.6.1.4.1.1991.1.1.13 | NodebrcdFabric | |||
| 1.3.6.1.4.1.1991.1.1.15 | NodebrcdIPSec | |||
| 1.3.6.1.4.1.1991.1.2 | Noderouter | |||
| 1.3.6.1.4.1.1991.1.2.1 | NodesnIpx | |||
| 1.3.6.1.4.1.1991.1.2.2 | IdentitysnIp | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.2.2.1 | NodesnRtIpGeneral | |||
| 1.3.6.1.4.1.1991.1.2.2.1.1 | ScalarsnRtClearArpCache | read-write | current | clear(1) will clear arp cache table. |
| 1.3.6.1.4.1.1991.1.2.2.1.2 | ScalarsnRtClearIpCache | read-write | current | clear(1) will clear ip route cache table. |
| 1.3.6.1.4.1.1991.1.2.2.1.3 | ScalarsnRtClearIpRoute | read-write | current | clear(1) will clear ip route table. |
| 1.3.6.1.4.1.1991.1.2.2.1.4 | ScalarsnRtBootpServer | read-write | deprecated | IP address of bootp server to which bootp packet need to be relayed. |
| 1.3.6.1.4.1.1991.1.2.2.1.5 | ScalarsnRtBootpRelayMax | read-write | current | Maximum number of hop the bootp packet should travel. |
| 1.3.6.1.4.1.1991.1.2.2.1.6 | ScalarsnRtArpAge | read-write | current | The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age. |
| 1.3.6.1.4.1.1991.1.2.2.1.7 | ScalarsnRtIpIrdpEnable | read-write | current | Perform router advertisement on this box. |
| 1.3.6.1.4.1.1991.1.2.2.1.8 | ScalarsnRtIpLoadShare | read-write | current | If more than one route available, use them to share load. |
| 1.3.6.1.4.1.1991.1.2.2.1.9 | ScalarsnRtIpProxyArp | read-write | current | Enable/disable proxy arp function in the box. |
| 1.3.6.1.4.1.1991.1.2.2.1.10 | ScalarsnRtIpRarp | read-write | current | Enable/disable RARP server. |
| 1.3.6.1.4.1.1991.1.2.2.1.11 | ScalarsnRtIpTtl | read-write | current | The time to live value to be used in IP header of IP packet generated by the box. |
| 1.3.6.1.4.1.1991.1.2.2.1.12 | ScalarsnRtIpSetAllPortConfig | read-write | current | The value of this object is an index number of a snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex), which is the selected row to copy all of its read-… |
| 1.3.6.1.4.1.1991.1.2.2.1.13 | ScalarsnRtIpFwdCacheMaxEntries | read-only | current | The maximum number of ip forwarding table entries. |
| 1.3.6.1.4.1.1991.1.2.2.1.14 | ScalarsnRtIpFwdCacheCurEntries | read-only | current | The current number of ip forwarding table entries. |
| 1.3.6.1.4.1.1991.1.2.2.1.15 | ScalarsnRtIpMaxStaticRouteEntries | read-only | current | The maximum number of static route entries in the static route table. |
| 1.3.6.1.4.1.1991.1.2.2.1.16 | ScalarsnRtIpDirBcastFwd | read-write | current | Enable/Disable directed broadcast forwarding. |
| 1.3.6.1.4.1.1991.1.2.2.1.17 | ScalarsnRtIpLoadShareNumOfPaths | read-write | current | Number of routes are used to share load. |
| 1.3.6.1.4.1.1991.1.2.2.1.18 | ScalarsnRtIpLoadShareMaxPaths | read-only | current | Maximum number of routes can be configured to share load. |
| 1.3.6.1.4.1.1991.1.2.2.1.19 | ScalarsnRtIpLoadShareMinPaths | read-only | current | Minimum number of routes can be configured to share load. |
| 1.3.6.1.4.1.1991.1.2.2.1.20 | ScalarsnRtIpProtocolRouterId | read-write | current | Router Id for all IP Protocols. |
| 1.3.6.1.4.1.1991.1.2.2.1.21 | ScalarsnRtIpSourceRoute | read-write | current | Enable/Disable source routing support, ability to drop the source routing packets. |
| 1.3.6.1.4.1.1991.1.2.2.2 | TablesnRtIpStaticRouteTable | not-accessible | current | IP static/default route table. |
| 1.3.6.1.4.1.1991.1.2.2.2.1 | RowsnRtIpStaticRouteEntry | not-accessible | current | An entry in the IP static route table. |
| 1.3.6.1.4.1.1991.1.2.2.2.1.1 | ColumnsnRtIpStaticRouteDest | read-write | current | Destination IP address. 0.0.0.0 for default route. |
| 1.3.6.1.4.1.1991.1.2.2.2.1.2 | ColumnsnRtIpStaticRouteMask | read-write | current | Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask. |
| 1.3.6.1.4.1.1991.1.2.2.2.1.3 | ColumnsnRtIpStaticRouteNextHop | read-write | current | IP address of next hop router that is located on one of the directly attached IP subnet. |
| 1.3.6.1.4.1.1991.1.2.2.2.1.4 | ColumnsnRtIpStaticRouteMetric | read-write | current | The metrics to next hop router. |
| 1.3.6.1.4.1.1991.1.2.2.2.1.5 | ColumnsnRtIpStaticRouteRowStatus | read-write | current | To create or delete a static route entry. |
| 1.3.6.1.4.1.1991.1.2.2.2.1.6 | ColumnsnRtIpStaticRouteDistance | read-write | current | Administration distance. |
| 1.3.6.1.4.1.1991.1.2.2.2.1.7 | ColumnsnRtIpStaticRouteOutgoingInterface | read-only | current | The outgoing interface of a static route. Use the ifIndex value here to specify the outgoing interface. Value of 0 indicates that outgoing interface has not be… |
| 1.3.6.1.4.1.1991.1.2.2.3 | TablesnRtIpFilterTable | not-accessible | current | IP filter table. |
| 1.3.6.1.4.1.1991.1.2.2.3.1 | RowsnRtIpFilterEntry | not-accessible | current | An entry in the IP filter table. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.1 | ColumnsnRtIpFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.2 | ColumnsnRtIpFilterAction | read-write | current | Action to take if the ip packet match with this filter. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.3 | ColumnsnRtIpFilterProtocol | read-write | current | Transport protocol. 0 means don't care |
| 1.3.6.1.4.1.1991.1.2.2.3.1.4 | ColumnsnRtIpFilterSourceIp | read-write | current | Source IP address. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.5 | ColumnsnRtIpFilterSourceMask | read-write | current | Source IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.6 | ColumnsnRtIpFilterDestIp | read-write | current | Destination IP address. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.7 | ColumnsnRtIpFilterDestMask | read-write | current | Destination IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.8 | ColumnsnRtIpFilterOperator | read-write | current | Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number |
| 1.3.6.1.4.1.1991.1.2.2.3.1.9 | ColumnsnRtIpFilterOperand | read-write | current | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.1991.1.2.2.3.1.10 | ColumnsnRtIpFilterRowStatus | read-write | current | To create or delete a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.11 | ColumnsnRtIpFilterEstablished | read-write | current | Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol. |
| 1.3.6.1.4.1.1991.1.2.2.3.1.12 | ColumnsnRtIpFilterQosPriority | read-write | current | The router L4 Qos Priority values are: low(0) high(1) The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), lev… |
| 1.3.6.1.4.1.1991.1.2.2.4 | TablesnRtIpRarpTable | not-accessible | current | IP RARP table. |
| 1.3.6.1.4.1.1991.1.2.2.4.1 | RowsnRtIpRarpEntry | not-accessible | current | An entry in the IP Rarp table. |
| 1.3.6.1.4.1.1991.1.2.2.4.1.1 | ColumnsnRtIpRarpIndex | read-only | current | The table index for a Rarp entry. |
| 1.3.6.1.4.1.1991.1.2.2.4.1.2 | ColumnsnRtIpRarpMac | read-write | current | The Mac address for a Rarp entry. |
| 1.3.6.1.4.1.1991.1.2.2.4.1.3 | ColumnsnRtIpRarpIp | read-write | current | The IP address for a Rarp entry. |
| 1.3.6.1.4.1.1991.1.2.2.4.1.4 | ColumnsnRtIpRarpRowStatus | read-write | current | To create or delete a Rarp entry. |
| 1.3.6.1.4.1.1991.1.2.2.5 | TablesnRtStaticArpTable | not-accessible | current | IP static arp table. |
| 1.3.6.1.4.1.1991.1.2.2.5.1 | RowsnRtStaticArpEntry | not-accessible | current | An entry in the IP static arp table. |
| 1.3.6.1.4.1.1991.1.2.2.5.1.1 | ColumnsnRtStaticArpIndex | read-only | current | The table index for a static arp entry. |
| 1.3.6.1.4.1.1991.1.2.2.5.1.2 | ColumnsnRtStaticArpIp | read-write | current | The IP address for a static arp entry. |
| 1.3.6.1.4.1.1991.1.2.2.5.1.3 | ColumnsnRtStaticArpMac | read-write | current | The Mac address for a static arp entry. |
| 1.3.6.1.4.1.1991.1.2.2.5.1.4 | ColumnsnRtStaticArpPort | read-write | current | The port index for a static arp entry. |
| 1.3.6.1.4.1.1991.1.2.2.5.1.5 | ColumnsnRtStaticArpRowStatus | read-write | current | To create or delete a Static Arp entry. |
| 1.3.6.1.4.1.1991.1.2.2.6 | TablesnRtIpPortAddrTable | not-accessible | deprecated | IP port address table. |
| 1.3.6.1.4.1.1991.1.2.2.6.1 | RowsnRtIpPortAddrEntry | not-accessible | deprecated | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.1991.1.2.2.6.1.1 | ColumnsnRtIpPortAddrPortIndex | read-only | deprecated | The port index for port address entry. |
| 1.3.6.1.4.1.1991.1.2.2.6.1.2 | ColumnsnRtIpPortAddress | read-only | deprecated | The port IP address. |
| 1.3.6.1.4.1.1991.1.2.2.6.1.3 | ColumnsnRtIpPortSubnetMask | read-write | deprecated | The port IP address subnet mask. |
| 1.3.6.1.4.1.1991.1.2.2.6.1.4 | ColumnsnRtIpPortAddrType | read-write | deprecated | The port IP address type. |
| 1.3.6.1.4.1.1991.1.2.2.6.1.5 | ColumnsnRtIpPortRowStatus | read-write | deprecated | To create or delete a port address entry. |
| 1.3.6.1.4.1.1991.1.2.2.7 | TablesnRtIpPortAccessTable | not-accessible | deprecated | IP port access table. |
| 1.3.6.1.4.1.1991.1.2.2.7.1 | RowsnRtIpPortAccessEntry | not-accessible | deprecated | An entry in the IP Port access table. |
| 1.3.6.1.4.1.1991.1.2.2.7.1.1 | ColumnsnRtIpPortAccessPortIndex | read-only | deprecated | The port index for port access entry. |
| 1.3.6.1.4.1.1991.1.2.2.7.1.2 | ColumnsnRtIpPortAccessDirection | read-only | deprecated | The incoming or outgoing check for port access. |
| 1.3.6.1.4.1.1991.1.2.2.7.1.3 | ColumnsnRtIpPortAccessFilters | read-write | deprecated | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.1991.1.2.2.7.1.4 | ColumnsnRtIpPortAccessRowStatus | read-write | deprecated | To create or delete a port access entry. |
| 1.3.6.1.4.1.1991.1.2.2.8 | TablesnRtIpPortConfigTable | not-accessible | deprecated | IP port Config table. |
| 1.3.6.1.4.1.1991.1.2.2.8.1 | RowsnRtIpPortConfigEntry | not-accessible | deprecated | An entry in the IP Port Config table. |
| 1.3.6.1.4.1.1991.1.2.2.8.1.1 | ColumnsnRtIpPortConfigPortIndex | read-only | deprecated | The port index for port config entry. |
| 1.3.6.1.4.1.1991.1.2.2.8.1.2 | ColumnsnRtIpPortMtu | read-write | deprecated | The maximun transfer unit. |
| 1.3.6.1.4.1.1991.1.2.2.8.1.3 | ColumnsnRtIpPortEncap | read-write | deprecated | Data link encapsulation to be used on the IP frame transmitted on the port. |
| 1.3.6.1.4.1.1991.1.2.2.8.1.4 | ColumnsnRtIpPortMetric | read-write | deprecated | The metric. |
| 1.3.6.1.4.1.1991.1.2.2.8.1.5 | ColumnsnRtIpPortDirBcastFwd | read-write | deprecated | Enable/Disable directed broadcast forwarding on the port. |
| 1.3.6.1.4.1.1991.1.2.2.9 | NodesnRtBcastFwd | |||
| 1.3.6.1.4.1.1991.1.2.2.9.1 | NodesnRtBcastFwdGeneral | |||
| 1.3.6.1.4.1.1991.1.2.2.9.1.1 | ScalarsnRtUdpBcastFwdEnable | read-write | current | Enable or disable UDP broadcast forwarding service. When UDP broadcast forwarding is enabled, default entries are added to the UDP broadcast forwarding port ta… |
| 1.3.6.1.4.1.1991.1.2.2.9.2 | NodesnRtUdpBcastFwdPort | |||
| 1.3.6.1.4.1.1991.1.2.2.9.2.1 | TablesnRtUdpBcastFwdPortTable | not-accessible | current | This table contains a list of UDP port numbers for which forwarding UDP broadcast is enabled. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.1.1 | RowsnRtUdpBcastFwdPortEntry | not-accessible | current | An entry of the UDP broadcast forwarding port table. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.1.1.1 | ColumnsnRtUdpBcastFwdPortIndex | read-only | current | The table index for a UDP broadcast forwarding port entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.1.1.2 | ColumnsnRtUdpBcastFwdPortNumber | read-write | current | UDP port number for which UDP broadcast forwarding is enabled. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.1.1.3 | ColumnsnRtUdpBcastFwdPortRowStatus | read-write | current | To create or delete a UDP broadcast forwarding port entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.2 | TablesnRtUdpBroadcastFwdPortTable | not-accessible | current | This table contains a list of UDP port numbers for which forwarding UDP broadcast is enabled. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.2.1 | RowsnRtUdpBroadcastFwdPortEntry | not-accessible | current | An entry of the UDP broadcast forwarding port table. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.2.1.1 | ColumnsnRtUdpBroadcastFwdPortNumber | not-accessible | current | UDP port number for which UDP broadcast forwarding is enabled. |
| 1.3.6.1.4.1.1991.1.2.2.9.2.2.1.2 | ColumnsnRtUdpBroadcastFwdPortRowStatus | read-write | current | To create or delete a UDP broadcast forwarding port entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3 | NodesnRtUdpHelper | |||
| 1.3.6.1.4.1.1991.1.2.2.9.3.1 | TablesnRtUdpHelperTable | not-accessible | current | UDP helper table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.1.1 | RowsnRtUdpHelperEntry | not-accessible | current | An entry of the UDP helper table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.1 | ColumnsnRtUdpHelperPortIndex | read-only | current | The port index for a UDP helper entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.2 | ColumnsnRtUdpHelperIndex | read-only | current | The table index for a UDP helper entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.3 | ColumnsnRtUdpHelperAddr | read-write | current | The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.… |
| 1.3.6.1.4.1.1991.1.2.2.9.3.1.1.4 | ColumnsnRtUdpHelperRowStatus | read-write | current | To create or delete a UDP helper entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.2 | TablesnRtUdpIfHelperTable | not-accessible | current | UDP helper table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.2.1 | RowsnRtUdpIfHelperEntry | not-accessible | current | An entry of the UDP helper table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.2.1.1 | ColumnsnRtUdpIfHelperPortIndex | not-accessible | current | The port/interface index for a UDP helper entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.2.1.2 | ColumnsnRtUdpIfHelperAddr | not-accessible | current | The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.… |
| 1.3.6.1.4.1.1991.1.2.2.9.3.2.1.3 | ColumnsnRtUdpIfHelperAddrType | read-write | current | Type of the helper address. It can be unicast or subnet brodcast address. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.2.1.4 | ColumnsnRtUdpIfHelperRowStatus | read-write | current | To create or delete a UDP helper entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.3 | TablesnRtIpIfHelperTable | not-accessible | current | IP helper address table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.3.1 | RowsnRtIpIfHelperEntry | not-accessible | current | An entry of the IP helper address table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.3.1.1 | ColumnsnRtIpIfHelperIfIndex | not-accessible | current | Interface index of the port for an IP helper address entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.3.1.2 | ColumnsnRtIpIfHelperAddrIndex | not-accessible | current | The helper address table index for an IP helper address entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.3.1.3 | ColumnsnRtIpIfHelperAddr | read-write | current | The IP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.2… |
| 1.3.6.1.4.1.1991.1.2.2.9.3.3.1.4 | ColumnsnRtIpIfHelperAddrType | read-write | current | Type of the helper address. It can be unicast or subnet broadcast address. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.3.1.5 | ColumnsnRtIpIfHelperRowStatus | read-write | current | To create or delete an IP helper entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.4 | TablesnRtIpv6IfHelperTable | not-accessible | current | IPV6 helper address table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.4.1 | RowsnRtIpv6IfHelperEntry | not-accessible | current | An entry of the IPV6 helper address table. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.4.1.1 | ColumnsnRtIpv6IfHelperIfIndex | not-accessible | current | Interface index of the port for an IPV6 helper address entry. |
| 1.3.6.1.4.1.1991.1.2.2.9.3.4.1.2 | ColumnsnRtIpv6IfHelperAddr | not-accessible | current | The IPV6 helper address. This is the address that client packets will be forwarded |
| 1.3.6.1.4.1.1991.1.2.2.9.3.4.1.3 | ColumnsnRtIpv6IfHelperRowStatus | read-write | current | To create or delete an IPV6IfhelperEntry. |
| 1.3.6.1.4.1.1991.1.2.2.10 | NodesnRtIpTraceRoute | |||
| 1.3.6.1.4.1.1991.1.2.2.10.1 | NodesnRtIpTraceRouteGeneral | |||
| 1.3.6.1.4.1.1991.1.2.2.10.1.1 | ScalarsnRtIpTraceRouteTargetAddr | read-write | current | Target IP address of which trace route is performed. |
| 1.3.6.1.4.1.1991.1.2.2.10.1.2 | ScalarsnRtIpTraceRouteMinTtl | read-write | current | Minimum TTL value carried in the first probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the … |
| 1.3.6.1.4.1.1991.1.2.2.10.1.3 | ScalarsnRtIpTraceRouteMaxTtl | read-write | current | Maximum TTL value carried in the last probe packet. Value 0 cannot be used for SET operations. This value is returned if traceroute is not running within the s… |
| 1.3.6.1.4.1.1991.1.2.2.10.1.4 | ScalarsnRtIpTraceRouteTimeOut | read-write | current | Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet). Value 0 cannot be used for SET operations. This value is re… |
| 1.3.6.1.4.1.1991.1.2.2.10.1.5 | ScalarsnRtIpTraceRouteControl | read-write | current | Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initi… |
| 1.3.6.1.4.1.1991.1.2.2.10.2 | NodesnRtIpTraceRouteResult | |||
| 1.3.6.1.4.1.1991.1.2.2.10.2.1 | TablesnRtIpTraceRouteResultTable | not-accessible | current | Trace route result table. |
| 1.3.6.1.4.1.1991.1.2.2.10.2.1.1 | RowsnRtIpTraceRouteResultEntry | not-accessible | current | An entry of the trace route result table. |
| 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.1 | ColumnsnRtIpTraceRouteResultIndex | read-only | current | The table index for a trace route result entry. |
| 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.2 | ColumnsnRtIpTraceRouteResultAddr | read-only | current | The router or the target address of which forms part of the route to reach the destination address. |
| 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.3 | ColumnsnRtIpTraceRouteResultRoundTripTime1 | read-only | current | The round trip time between the first probe packet transmitted and the reponse ICMP packet received. |
| 1.3.6.1.4.1.1991.1.2.2.10.2.1.1.4 | ColumnsnRtIpTraceRouteResultRoundTripTime2 | read-only | current | The round trip time between the second probe packet transmitted and the reponse ICMP packet received. |
| 1.3.6.1.4.1.1991.1.2.2.11 | TablesnRtIpFwdCacheTable | not-accessible | current | IP forwarding cache table. |
| 1.3.6.1.4.1.1991.1.2.2.11.1 | RowsnRtIpFwdCacheEntry | not-accessible | current | An entry in the IP forwarding cache table. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.1 | ColumnsnRtIpFwdCacheIndex | read-only | current | The table index for a ip forwarding cache table entry. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.2 | ColumnsnRtIpFwdCacheIp | read-only | current | The IP address of a station. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.3 | ColumnsnRtIpFwdCacheMac | read-only | current | The Mac address of an IP station. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.4 | ColumnsnRtIpFwdCacheNextHopIp | read-only | current | The next hop router IP address. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.5 | ColumnsnRtIpFwdCacheOutgoingPort | read-only | current | The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. Non-zero value has the fol… |
| 1.3.6.1.4.1.1991.1.2.2.11.1.6 | ColumnsnRtIpFwdCacheType | read-only | current | The 'dynamic' or 'permanent' type for a ip forwarding cache table entry. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.7 | ColumnsnRtIpFwdCacheAction | read-only | current | The action to take. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.8 | ColumnsnRtIpFwdCacheFragCheck | read-only | current | Check for fragmentation. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.9 | ColumnsnRtIpFwdCacheSnapHdr | read-only | current | Apply SNAP encapsulation. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.10 | ColumnsnRtIpFwdCacheVLanId | read-only | current | The VLAN ID for a ip forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry. |
| 1.3.6.1.4.1.1991.1.2.2.11.1.11 | ColumnsnRtIpFwdCacheOutgoingIf | read-only | current | The outgoing interface of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. |
| 1.3.6.1.4.1.1991.1.2.2.12 | TablesnIpAsPathAccessListTable | not-accessible | current | Ip As-Path Access List table. |
| 1.3.6.1.4.1.1991.1.2.2.12.1 | RowsnIpAsPathAccessListEntry | not-accessible | current | An entry in the Ip As-Path Access List table. |
| 1.3.6.1.4.1.1991.1.2.2.12.1.1 | ColumnsnIpAsPathAccessListIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.12.1.2 | ColumnsnIpAsPathAccessListSequence | read-only | current | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.12.1.3 | ColumnsnIpAsPathAccessListAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.2.12.1.4 | ColumnsnIpAsPathAccessListRegExpression | read-write | current | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.2.12.1.5 | ColumnsnIpAsPathAccessListRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.2.13 | TablesnIpCommunityListTable | not-accessible | current | Ip Community List table. |
| 1.3.6.1.4.1.1991.1.2.2.13.1 | RowsnIpCommunityListEntry | not-accessible | current | An entry in the Ip Community List table. |
| 1.3.6.1.4.1.1991.1.2.2.13.1.1 | ColumnsnIpCommunityListIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.13.1.2 | ColumnsnIpCommunityListSequence | read-only | current | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.13.1.3 | ColumnsnIpCommunityListAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.2.13.1.4 | ColumnsnIpCommunityListCommNum | read-write | current | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.2.13.1.5 | ColumnsnIpCommunityListInternet | read-write | current | Disabled/Enabled the Internet Community. |
| 1.3.6.1.4.1.1991.1.2.2.13.1.6 | ColumnsnIpCommunityListNoAdvertise | read-write | current | Do not advertise this route to any peer (internal or external). |
| 1.3.6.1.4.1.1991.1.2.2.13.1.7 | ColumnsnIpCommunityListNoExport | read-write | current | Do not advertise this route to an EBGP peer. |
| 1.3.6.1.4.1.1991.1.2.2.13.1.8 | ColumnsnIpCommunityListRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.2.13.1.9 | ColumnsnIpCommunityListLocalAs | read-write | current | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. |
| 1.3.6.1.4.1.1991.1.2.2.14 | TablesnIpPrefixListTable | not-accessible | current | Ip Prefix List table. |
| 1.3.6.1.4.1.1991.1.2.2.14.1 | RowsnIpPrefixListEntry | not-accessible | current | An entry in the Ip Prefix List table. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.1 | ColumnsnIpPrefixListName | read-only | current | An octet string of the ip prefix list name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.2 | ColumnsnIpPrefixListSequence | read-only | current | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.3 | ColumnsnIpPrefixListDesc | read-write | current | An octet string of the ip prefix list description, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.4 | ColumnsnIpPrefixListAction | read-write | current | Action to take if the ip prefix match with this filter. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.5 | ColumnsnIpPrefixListAddr | read-write | current | Prefix IP address. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.6 | ColumnsnIpPrefixListMask | read-write | current | Prefix IP mask. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.7 | ColumnsnIpPrefixListGeValue | read-write | current | Greater than value. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.8 | ColumnsnIpPrefixListLeValue | read-write | current | Less than value. |
| 1.3.6.1.4.1.1991.1.2.2.14.1.9 | ColumnsnIpPrefixListRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.2.14.1.10 | ColumnsnIpPrefixListLength | read-write | current | Prefix IP mask length. |
| 1.3.6.1.4.1.1991.1.2.2.16 | TablesnIpAsPathAccessListStringTable | not-accessible | current | Ip As-Path Access List table, string version. |
| 1.3.6.1.4.1.1991.1.2.2.16.1 | RowsnIpAsPathAccessListStringEntry | not-accessible | current | An entry in the Ip As-Path Access List table. |
| 1.3.6.1.4.1.1991.1.2.2.16.1.1 | ColumnsnIpAsPathAccessListStringName | read-only | current | The table index for a filter entry, string version. |
| 1.3.6.1.4.1.1991.1.2.2.16.1.2 | ColumnsnIpAsPathAccessListStringSequence | read-only | current | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.16.1.3 | ColumnsnIpAsPathAccessListStringAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.2.16.1.4 | ColumnsnIpAsPathAccessListStringRegExpression | read-write | current | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.2.16.1.5 | ColumnsnIpAsPathAccessListStringRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.2.17 | TablesnIpCommunityListStringTable | not-accessible | current | Ip Community ListString table, string version. |
| 1.3.6.1.4.1.1991.1.2.2.17.1 | RowsnIpCommunityListStringEntry | not-accessible | current | An entry in the Ip Community ListString table. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.1 | ColumnsnIpCommunityListStringName | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.2 | ColumnsnIpCommunityListStringSequence | read-only | current | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.3 | ColumnsnIpCommunityListStringAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.4 | ColumnsnIpCommunityListStringCommNum | read-write | current | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. This object is valid for standard community list. For exte… |
| 1.3.6.1.4.1.1991.1.2.2.17.1.5 | ColumnsnIpCommunityListStringInternet | read-write | current | Disabled/Enabled the Internet Community. Valid only for standard community list. For extended type, 0 is returned. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.6 | ColumnsnIpCommunityListStringNoAdvertise | read-write | current | Do not advertise this route to any peer (internal or external). Valid only for standard community list. For extended type, 0 is returned. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.7 | ColumnsnIpCommunityListStringNoExport | read-write | current | Do not advertise this route to an EBGP peer. Valid only for standard community list. For extended type, 0 is returned. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.8 | ColumnsnIpCommunityListStringRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.2.17.1.9 | ColumnsnIpCommunityListStringLocalAs | read-write | current | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. Valid only for stan… |
| 1.3.6.1.4.1.1991.1.2.2.17.1.10 | ColumnsnIpCommunityListStringType | read-write | current | Type of the community list, whether standard or extended. Default value is standard. |
| 1.3.6.1.4.1.1991.1.2.2.17.1.11 | ColumnsnIpCommunityListStringRegExpr | read-write | current | The regular expression string for extended community list. This object will return NULL for standard community list. |
| 1.3.6.1.4.1.1991.1.2.2.18 | TablesnRtIpPortIfAddrTable | not-accessible | current | IP port If address table. |
| 1.3.6.1.4.1.1991.1.2.2.18.1 | RowsnRtIpPortIfAddrEntry | not-accessible | current | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.1991.1.2.2.18.1.1 | ColumnsnRtIpPortIfAddrInterfaceIndex | read-only | current | The InterfaceIndex for port address entry. |
| 1.3.6.1.4.1.1991.1.2.2.18.1.2 | ColumnsnRtIpPortIfAddress | read-only | current | The port IP address. |
| 1.3.6.1.4.1.1991.1.2.2.18.1.3 | ColumnsnRtIpPortIfSubnetMask | read-write | current | The port IP address subnet mask. |
| 1.3.6.1.4.1.1991.1.2.2.18.1.4 | ColumnsnRtIpPortIfAddrType | read-write | current | The port IP address type. |
| 1.3.6.1.4.1.1991.1.2.2.18.1.5 | ColumnsnRtIpPortIfRowStatus | read-write | current | To create or delete a port address entry. |
| 1.3.6.1.4.1.1991.1.2.2.19 | TablesnRtIpPortIfAccessTable | not-accessible | current | IP port If access table. |
| 1.3.6.1.4.1.1991.1.2.2.19.1 | RowsnRtIpPortIfAccessEntry | not-accessible | current | An entry in the IP Port access table. |
| 1.3.6.1.4.1.1991.1.2.2.19.1.1 | ColumnsnRtIpPortIfAccessInterfaceIndex | read-only | current | The InterfaceIndex for port access entry. |
| 1.3.6.1.4.1.1991.1.2.2.19.1.2 | ColumnsnRtIpPortIfAccessDirection | read-only | current | The incoming or outgoing check for port access. |
| 1.3.6.1.4.1.1991.1.2.2.19.1.3 | ColumnsnRtIpPortIfAccessFilters | read-write | current | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.1991.1.2.2.19.1.4 | ColumnsnRtIpPortIfAccessRowStatus | read-write | current | To create or delete a port access entry. |
| 1.3.6.1.4.1.1991.1.2.2.20 | TablesnRtIpPortIfConfigTable | not-accessible | current | IP port If Config table. |
| 1.3.6.1.4.1.1991.1.2.2.20.1 | RowsnRtIpPortIfConfigEntry | not-accessible | current | An entry in the IP Port Config table. |
| 1.3.6.1.4.1.1991.1.2.2.20.1.1 | ColumnsnRtIpPortIfConfigInterfaceIndex | read-only | current | The If index for port config entry. |
| 1.3.6.1.4.1.1991.1.2.2.20.1.2 | ColumnsnRtIpPortIfMtu | read-write | current | The maximun transfer unit. Ethernet MTU Range: 46 to 1500 POS MTU Range: 60 to 4470 ATM MTU Range: 1500 to 9180 ATM SubIf MTU Range: 1500 to 9180 For jumbo sup… |
| 1.3.6.1.4.1.1991.1.2.2.20.1.3 | ColumnsnRtIpPortIfEncap | read-write | current | Data link encapsulation to be used on the IP frame transmitted on the port. |
| 1.3.6.1.4.1.1991.1.2.2.20.1.4 | ColumnsnRtIpPortIfMetric | read-write | current | The metric. |
| 1.3.6.1.4.1.1991.1.2.2.20.1.5 | ColumnsnRtIpPortIfDirBcastFwd | read-write | current | Enable/Disable directed broadcast forwarding on the port. |
| 1.3.6.1.4.1.1991.1.2.2.21 | TableagIpPortCounterTable | not-accessible | current | IP port counter table to display IP traffic statistics. At present the system supports only IP statistics for Ethernet ports. |
| 1.3.6.1.4.1.1991.1.2.2.21.1 | RowagIpPortCounterEntry | not-accessible | current | An entry in the IP port counter table. |
| 1.3.6.1.4.1.1991.1.2.2.21.1.1 | ColumnagIpPortCounterIpVersion | not-accessible | current | The version of IP protocol for which this counter entry is returned. This table supports ipv4(1) and ipv6(2) enumerations. |
| 1.3.6.1.4.1.1991.1.2.2.21.1.2 | ColumnagIpPortCounterRxPacket | read-only | current | Total IP packets received on a given interface. |
| 1.3.6.1.4.1.1991.1.2.2.21.1.3 | ColumnagIpPortCounterRxOctet | read-only | current | Total IP octets received on a given interface. |
| 1.3.6.1.4.1.1991.1.2.2.21.1.4 | ColumnagIpPortCounterTxPacket | read-only | current | Total IP packets transmitted out from a given interface. |
| 1.3.6.1.4.1.1991.1.2.2.21.1.5 | ColumnagIpPortCounterTxOctet | read-only | current | Total IP octets transmitted out from a given interface. |
| 1.3.6.1.4.1.1991.1.2.2.23 | TablesnRouteStatsEntryTable | not-accessible | current | IPv4/IPv6 Routing table statistics. |
| 1.3.6.1.4.1.1991.1.2.2.23.1 | RowsnRouteStatsEntry | not-accessible | current | An entry in the Routing statistics table. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.1 | ColumnsnRouteStatsVrfNameLength | not-accessible | current | Length of VRF name. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.2 | ColumnsnRouteStatsVrfName | not-accessible | current | VRF name. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.3 | ColumnsnRouteStatsAfi | not-accessible | current | Address family identifier: ipv4(1) or ipv6(2). |
| 1.3.6.1.4.1.1991.1.2.2.23.1.4 | ColumnsnRouteStatsRouteLimit | read-only | current | Maximum number of routes allowed in the routing table for a VRF and AFI (VRF maximum limit). |
| 1.3.6.1.4.1.1991.1.2.2.23.1.5 | ColumnsnRouteStatsRouteCount | read-only | current | Current route count in the routing table for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.6 | ColumnsnRouteStatsDirectRouteCount | read-only | current | Number of Connected routes for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.7 | ColumnsnRouteStatsHostRouteCount | read-only | current | Number of Host routes for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.8 | ColumnsnRouteStatsStaticRouteCount | read-only | current | Number of Static routes for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.9 | ColumnsnRouteStatsRipRouteCount | read-only | current | Number of RIP routes for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.10 | ColumnsnRouteStatsOspfRouteCount | read-only | current | Number of OSPF routes for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.2.23.1.11 | ColumnsnRouteStatsBgpRouteCount | read-only | current | Number of BGP routes for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.3 | NodesnRip | |||
| 1.3.6.1.4.1.1991.1.2.3.1 | NodesnRtIpRipGeneral | |||
| 1.3.6.1.4.1.1991.1.2.3.1.1 | ScalarsnRtIpRipEnable | read-write | current | Enable/disable ip rip routing. |
| 1.3.6.1.4.1.1991.1.2.3.1.2 | ScalarsnRtIpRipUpdateTime | read-write | current | Ip rip update interval in seconds. |
| 1.3.6.1.4.1.1991.1.2.3.1.3 | ScalarsnRtIpRipRedisEnable | read-write | current | Enable/disable redistribution to rip. |
| 1.3.6.1.4.1.1991.1.2.3.1.4 | ScalarsnRtIpRipRedisDefMetric | read-write | current | Default metric to be used when redistribute route to rip. |
| 1.3.6.1.4.1.1991.1.2.3.1.5 | ScalarsnRtIpRipSetAllPortConfig | read-write | current | The value of this object is an index number of a snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex), which is the selected row to copy all of its… |
| 1.3.6.1.4.1.1991.1.2.3.1.6 | ScalarsnRtIpRipGblFiltList | read-write | current | An ip rip global filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable wit… |
| 1.3.6.1.4.1.1991.1.2.3.1.7 | ScalarsnRtIpRipFiltOnAllPort | read-write | current | Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/… |
| 1.3.6.1.4.1.1991.1.2.3.1.8 | ScalarsnRtIpRipDistance | read-write | current | Administration distance. |
| 1.3.6.1.4.1.1991.1.2.3.1.9 | ScalarsnRtIpRipEcmpEnable | read-write | current | Enable/disable ECMP for ip rip routing. |
| 1.3.6.1.4.1.1991.1.2.3.2 | TablesnRtIpRipPortConfigTable | not-accessible | deprecated | IP Rip port Config table. |
| 1.3.6.1.4.1.1991.1.2.3.2.1 | RowsnRtIpRipPortConfigEntry | not-accessible | deprecated | An entry in the IP Rip Port Config table. |
| 1.3.6.1.4.1.1991.1.2.3.2.1.1 | ColumnsnRtIpRipPortConfigPortIndex | read-only | deprecated | The port index for ip rip port config entry. |
| 1.3.6.1.4.1.1991.1.2.3.2.1.2 | ColumnsnRtIpRipPortVersion | read-write | deprecated | The ip rip version on this port. |
| 1.3.6.1.4.1.1991.1.2.3.2.1.3 | ColumnsnRtIpRipPortPoisonReverse | read-write | deprecated | Enable/disable poison reverse. |
| 1.3.6.1.4.1.1991.1.2.3.2.1.4 | ColumnsnRtIpRipPortLearnDefault | read-write | deprecated | Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enable… |
| 1.3.6.1.4.1.1991.1.2.3.3 | TablesnRtIpRipRedisTable | not-accessible | current | IP Rip Redistribution table. |
| 1.3.6.1.4.1.1991.1.2.3.3.1 | RowsnRtIpRipRedisEntry | not-accessible | current | An entry in the IP Rip Redistribution table. |
| 1.3.6.1.4.1.1991.1.2.3.3.1.1 | ColumnsnRtIpRipRedisIndex | read-only | current | The table index for a IP Rip Redistribution entry. |
| 1.3.6.1.4.1.1991.1.2.3.3.1.2 | ColumnsnRtIpRipRedisAction | read-write | current | The action to take when match this IP Rip Redistribution entry. |
| 1.3.6.1.4.1.1991.1.2.3.3.1.3 | ColumnsnRtIpRipRedisProtocol | read-write | current | The protocol to be distributed. other(1) cannot be used for SNMP-SET. |
| 1.3.6.1.4.1.1991.1.2.3.3.1.4 | ColumnsnRtIpRipRedisIp | read-write | current | The ip address of the ip route to be distributed. 0.0.0.0 - all routes |
| 1.3.6.1.4.1.1991.1.2.3.3.1.5 | ColumnsnRtIpRipRedisMask | read-write | current | The ip subnet mask of the ip route to be distributed. |
| 1.3.6.1.4.1.1991.1.2.3.3.1.6 | ColumnsnRtIpRipRedisMatchMetric | read-write | current | The metric of the route to be matched to determine the redistribution. 0 - any metric value |
| 1.3.6.1.4.1.1991.1.2.3.3.1.7 | ColumnsnRtIpRipRedisSetMetric | read-write | current | The new metric of the route to be advertised. 0 - use the default metric. |
| 1.3.6.1.4.1.1991.1.2.3.3.1.8 | ColumnsnRtIpRipRedisRowStatus | read-write | current | To create or delete a Redistribution entry. |
| 1.3.6.1.4.1.1991.1.2.3.3.1.9 | ColumnsnRtIpRipRedisRouteMapName | read-write | current | The route map reference for this Redistribution entry. |
| 1.3.6.1.4.1.1991.1.2.3.4 | TablesnRtIpRipRouteFilterTable | not-accessible | current | ip rip route filter table. |
| 1.3.6.1.4.1.1991.1.2.3.4.1 | RowsnRtIpRipRouteFilterEntry | not-accessible | current | An entry of the ip rip route filter table. |
| 1.3.6.1.4.1.1991.1.2.3.4.1.1 | ColumnsnRtIpRipRouteFilterId | read-only | current | The filter ID to identify a filter entry. |
| 1.3.6.1.4.1.1991.1.2.3.4.1.2 | ColumnsnRtIpRipRouteFilterAction | read-write | current | Action to take if the ip rip packet matched with this filter. |
| 1.3.6.1.4.1.1991.1.2.3.4.1.3 | ColumnsnRtIpRipRouteFilterIpAddr | read-write | current | Route IP address to compare with any route IP addresses in a ip rip packet. IP address 0.0.0.0 always compare equals to any route IP addresses in any ip rip pa… |
| 1.3.6.1.4.1.1991.1.2.3.4.1.4 | ColumnsnRtIpRipRouteFilterSubnetMask | read-write | current | Subnet mask to apply to the route IP address in a ip rip packet, the result is compared to snRtIpRipRouteFilterIpAddr. If snRtIpRipRouteFilterIpAddr is 0.0.0.0… |
| 1.3.6.1.4.1.1991.1.2.3.4.1.5 | ColumnsnRtIpRipRouteFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.3.5 | TablesnRtIpRipNbrFilterTable | not-accessible | current | ip rip neighbor filter table. |
| 1.3.6.1.4.1.1991.1.2.3.5.1 | RowsnRtIpRipNbrFilterEntry | not-accessible | current | An entry of the ip rip neighbor filter table. |
| 1.3.6.1.4.1.1991.1.2.3.5.1.1 | ColumnsnRtIpRipNbrFilterId | read-only | current | The filter ID to identify a filter entry. |
| 1.3.6.1.4.1.1991.1.2.3.5.1.2 | ColumnsnRtIpRipNbrFilterAction | read-write | current | Action to take if the ip rip packet source IP address compares equal to the source IP address in this filter. |
| 1.3.6.1.4.1.1991.1.2.3.5.1.3 | ColumnsnRtIpRipNbrFilterSourceIp | read-write | current | Source IP address to compare with the source IP address in a ip rip packet. IP address 0.0.0.0 always compares equal to any source IP addresses in any ip rip p… |
| 1.3.6.1.4.1.1991.1.2.3.5.1.4 | ColumnsnRtIpRipNbrFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.3.6 | TablesnRtIpRipPortAccessTable | not-accessible | deprecated | ip interface rip access table. |
| 1.3.6.1.4.1.1991.1.2.3.6.1 | RowsnRtIpRipPortAccessEntry | not-accessible | deprecated | An entry of the ip interface rip access table. |
| 1.3.6.1.4.1.1991.1.2.3.6.1.1 | ColumnsnRtIpRipPortAccessPort | read-only | deprecated | The ip interface to which the rip filter applies. |
| 1.3.6.1.4.1.1991.1.2.3.6.1.2 | ColumnsnRtIpRipPortAccessDir | read-only | deprecated | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.1991.1.2.3.6.1.3 | ColumnsnRtIpRipPortAccessFilterList | read-write | deprecated | An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the c… |
| 1.3.6.1.4.1.1991.1.2.3.6.1.4 | ColumnsnRtIpRipPortAccessRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.3.7 | TablesnRtIpRipPortIfConfigTable | not-accessible | current | IP Rip port If Config table. |
| 1.3.6.1.4.1.1991.1.2.3.7.1 | RowsnRtIpRipPortIfConfigEntry | not-accessible | current | An entry in the IP Rip Port If Config table. |
| 1.3.6.1.4.1.1991.1.2.3.7.1.1 | ColumnsnRtIpRipPortIfConfigInterfaceIndex | read-only | current | The If index for ip rip port config entry. |
| 1.3.6.1.4.1.1991.1.2.3.7.1.2 | ColumnsnRtIpRipPortIfVersion | read-write | current | The ip rip version on this port. |
| 1.3.6.1.4.1.1991.1.2.3.7.1.3 | ColumnsnRtIpRipPortIfPoisonReverse | read-write | current | Enable/disable poison reverse. |
| 1.3.6.1.4.1.1991.1.2.3.7.1.4 | ColumnsnRtIpRipPortIfLearnDefault | read-write | current | Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enable… |
| 1.3.6.1.4.1.1991.1.2.3.8 | TablesnRtIpRipPortIfAccessTable | not-accessible | current | ip interface rip access table. |
| 1.3.6.1.4.1.1991.1.2.3.8.1 | RowsnRtIpRipPortIfAccessEntry | not-accessible | current | An entry of the ip interface rip access table. |
| 1.3.6.1.4.1.1991.1.2.3.8.1.1 | ColumnsnRtIpRipPortIfAccessPort | read-only | current | The ip interface to which the rip filter applies. |
| 1.3.6.1.4.1.1991.1.2.3.8.1.2 | ColumnsnRtIpRipPortIfAccessDir | read-only | current | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.1991.1.2.3.8.1.3 | ColumnsnRtIpRipPortIfAccessFilterList | read-write | current | An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the c… |
| 1.3.6.1.4.1.1991.1.2.3.8.1.4 | ColumnsnRtIpRipPortIfAccessRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.3.9 | NodesnRtIpRipStats | |||
| 1.3.6.1.4.1.1991.1.2.3.9.1 | ScalarsnRtIpRipStatsOutRequest | read-only | current | Number of outgoing RIP requests. |
| 1.3.6.1.4.1.1991.1.2.3.9.2 | ScalarsnRtIpRipStatsOutResponse | read-only | current | Number of outgoing RIP responses. |
| 1.3.6.1.4.1.1991.1.2.3.9.3 | ScalarsnRtIpRipStatsInRequest | read-only | current | Number of incoming RIP requests. |
| 1.3.6.1.4.1.1991.1.2.3.9.4 | ScalarsnRtIpRipStatsInResponse | read-only | current | Number of incoming RIP responses. |
| 1.3.6.1.4.1.1991.1.2.3.9.5 | ScalarsnRtIpRipStatsUnrecognized | read-only | current | Number of unrecognized RIP packets. |
| 1.3.6.1.4.1.1991.1.2.3.9.6 | ScalarsnRtIpRipStatsBadVersion | read-only | current | Number of RIP packets with bad version number. |
| 1.3.6.1.4.1.1991.1.2.3.9.7 | ScalarsnRtIpRipStatsBadAddrFamily | read-only | current | Number of RIP packets with bad address family value. |
| 1.3.6.1.4.1.1991.1.2.3.9.8 | ScalarsnRtIpRipStatsBadRequestFormat | read-only | current | Number of RIP packets with bad request format. |
| 1.3.6.1.4.1.1991.1.2.3.9.9 | ScalarsnRtIpRipStatsBadMetrics | read-only | current | Number of RIP packets with bad metric value. |
| 1.3.6.1.4.1.1991.1.2.3.9.10 | ScalarsnRtIpRipStatsBadRespFormat | read-only | current | Number of RIP packets with bad response format. |
| 1.3.6.1.4.1.1991.1.2.3.9.11 | ScalarsnRtIpRipStatsRespFromNonRipPort | read-only | current | Number of RIP packet responses coming from non-RIP configured ports. |
| 1.3.6.1.4.1.1991.1.2.3.9.12 | ScalarsnRtIpRipStatsResponseFromLoopback | read-only | current | Number of RIP packet responses coming from loopback ports. |
| 1.3.6.1.4.1.1991.1.2.3.9.13 | ScalarsnRtIpRipStatsPacketRejected | read-only | current | Number of RIP packets rejected. |
| 1.3.6.1.4.1.1991.1.2.4 | IdentitysnOspf | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.2.4.1 | NodesnOspfGen | |||
| 1.3.6.1.4.1.1991.1.2.4.1.1 | ScalarsnOspfRouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.4.1.1991.1.2.4.1.2 | ScalarsnOspfAdminStat | read-write | current | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it … |
| 1.3.6.1.4.1.1991.1.2.4.1.3 | ScalarsnOspfASBdrRtrStatus | read-write | current | A flag to note whether this router is an Autonomous System border router. |
| 1.3.6.1.4.1.1991.1.2.4.1.4 | ScalarsnOspfRedisMode | read-write | current | The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router. |
| 1.3.6.1.4.1.1991.1.2.4.1.5 | ScalarsnOspfDefaultOspfMetricValue | read-write | current | The metric of using a default OSPF Metric value on this route. |
| 1.3.6.1.4.1.1991.1.2.4.1.6 | ScalarsnOspfExternLSACount | read-only | current | The number of external (LS type 5) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.1991.1.2.4.1.7 | ScalarsnOspfExternLSACksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine i… |
| 1.3.6.1.4.1.1991.1.2.4.1.8 | ScalarsnOspfOriginateNewLSAs | read-only | current | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. |
| 1.3.6.1.4.1.1991.1.2.4.1.9 | ScalarsnOspfRxNewLSAs | read-only | current | The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link… |
| 1.3.6.1.4.1.1991.1.2.4.1.10 | ScalarsnOspfOspfRedisMetricType | read-write | current | type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric. type2: For external Type 2 (… |
| 1.3.6.1.4.1.1991.1.2.4.1.11 | ScalarsnOspfExtLsdbLimit | read-write | current | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. When the number of non-default AS-external-LSAs in a… |
| 1.3.6.1.4.1.1991.1.2.4.1.12 | ScalarsnOspfExitOverflowInterval | read-write | current | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.4.1.1991.1.2.4.1.13 | ScalarsnOspfRfc1583Compatibility | read-write | current | This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather than RFC2178 disabled(0).......… |
| 1.3.6.1.4.1.1991.1.2.4.1.14 | ScalarsnOspfRouterIdFormat | read-write | current | This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. i… |
| 1.3.6.1.4.1.1991.1.2.4.1.15 | ScalarsnOspfDistance | read-write | obsolete | OSPF Adminitrative distance. 0 if distance is not set. |
| 1.3.6.1.4.1.1991.1.2.4.1.16 | ScalarsnOspfDistanceIntra | read-write | current | OSPF Adminitrative distance - Intra Area. |
| 1.3.6.1.4.1.1991.1.2.4.1.17 | ScalarsnOspfDistanceInter | read-write | current | OSPF Adminitrative distance - Inter Area. |
| 1.3.6.1.4.1.1991.1.2.4.1.18 | ScalarsnOspfDistanceExternal | read-write | current | OSPF Adminitrative distance - External. |
| 1.3.6.1.4.1.1991.1.2.4.2 | NodesnOspfArea | |||
| 1.3.6.1.4.1.1991.1.2.4.2.1 | TablesnOspfAreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.1991.1.2.4.2.1.1 | RowsnOspfAreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.1991.1.2.4.2.1.1.1 | ColumnsnOspfAreaId | read-only | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.1991.1.2.4.2.1.1.2 | ColumnsnOspfImportASExtern | read-write | current | The area's support for importing AS external link- state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type |
| 1.3.6.1.4.1.1991.1.2.4.2.1.1.3 | ColumnsnOspfStubMetric | read-write | current | The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to ot… |
| 1.3.6.1.4.1.1991.1.2.4.2.1.1.4 | ColumnsnOspfAreaRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.4.2.1.1.5 | ColumnsnOspfAreaIdFormat | read-write | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.3 | NodesnOspfAddrRange | |||
| 1.3.6.1.4.1.1991.1.2.4.3.1 | TablesnOspfAreaRangeTable | not-accessible | current | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.4.1.1991.1.2.4.3.1.1 | RowsnOspfAreaRangeEntry | not-accessible | current | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.4.1.1991.1.2.4.3.1.1.1 | ColumnsnOspfAreaRangeAreaID | read-only | current | The Area the Address Range is to be found within. |
| 1.3.6.1.4.1.1991.1.2.4.3.1.1.2 | ColumnsnOspfAreaRangeNet | read-only | current | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.1991.1.2.4.3.1.1.3 | ColumnsnOspfAreaRangeMask | read-write | current | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.1991.1.2.4.3.1.1.4 | ColumnsnOspfAreaRangeRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.4.3.1.1.5 | ColumnsnOspfAreaRangeAreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.4 | NodesnOspfIntf | |||
| 1.3.6.1.4.1.1991.1.2.4.4.1 | TablesnOspfIfTable | not-accessible | deprecated | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1 | RowsnOspfIfEntry | not-accessible | deprecated | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.1 | ColumnsnOspfIfPort | read-only | deprecated | The physical router port of this OSPF interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.2 | ColumnsnOspfIfAreaId | read-write | deprecated | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.3 | ColumnsnOspfIfAdminStat | read-write | deprecated | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.4 | ColumnsnOspfIfRtrPriority | read-write | deprecated | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.5 | ColumnsnOspfIfTransitDelay | read-write | deprecated | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.6 | ColumnsnOspfIfRetransInterval | read-write | deprecated | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.7 | ColumnsnOspfIfHelloInterval | read-write | deprecated | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.8 | ColumnsnOspfIfRtrDeadInterval | read-write | deprecated | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.9 | ColumnsnOspfIfAuthType | read-write | deprecated | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.10 | ColumnsnOspfIfAuthKey | read-write | deprecated | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.11 | ColumnsnOspfIfMetricValue | read-write | deprecated | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.12 | ColumnsnOspfIfRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.13 | ColumnsnOspfIfMd5AuthKeyId | read-write | deprecated | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algor… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.14 | ColumnsnOspfIfMd5AuthKey | read-write | deprecated | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.15 | ColumnsnOspfIfMd5ActivationWaitTime | read-write | deprecated | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.16 | ColumnsnOspfIfAreaIdFormat | read-only | deprecated | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.17 | ColumnsnOspfIfPassiveMode | read-write | deprecated | This object control the passive mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.18 | ColumnsnOspfIfDatabaseFilterAllOut | read-write | deprecated | This object control the filtering of outgoing OSPF LSA on this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.19 | ColumnsnOspfIfMtuIgnore | read-write | deprecated | This object control MTU detection mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.1.1.20 | ColumnsnOspfIfNetworkP2mp | read-write | deprecated | This object enable/disable P2MP mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2 | TablesnOspfIf2Table | not-accessible | current | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1 | RowsnOspfIf2Entry | not-accessible | current | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.1 | ColumnsnOspfIf2Port | read-only | current | The physical router port of this OSPF interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.2 | ColumnsnOspfIf2AreaId | read-write | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.3 | ColumnsnOspfIf2AdminStat | read-write | current | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.4 | ColumnsnOspfIf2RtrPriority | read-write | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.5 | ColumnsnOspfIf2TransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.6 | ColumnsnOspfIf2RetransInterval | read-write | current | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.7 | ColumnsnOspfIf2HelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.8 | ColumnsnOspfIf2RtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.9 | ColumnsnOspfIf2AuthType | read-write | current | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.10 | ColumnsnOspfIf2AuthKey | read-write | current | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.11 | ColumnsnOspfIf2MetricValue | read-write | current | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.12 | ColumnsnOspfIf2RowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.13 | ColumnsnOspfIf2Md5AuthKeyId | read-write | current | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algo… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.14 | ColumnsnOspfIf2Md5AuthKey | read-write | current | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.15 | ColumnsnOspfIf2Md5ActivationWaitTime | read-write | current | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.16 | ColumnsnOspfIf2AreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.17 | ColumnsnOspfIf2PassiveMode | read-write | current | This object control the passive mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.18 | ColumnsnOspfIf2DatabaseFilterAllOut | read-write | current | This object control the filtering of outgoing OSPF LSA on this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.19 | ColumnsnOspfIf2MtuIgnore | read-write | current | This object control MTU detection mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.20 | ColumnsnOspfIf2NetworkP2mp | read-write | current | This object enable/disable P2MP mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.21 | ColumnsnOspfIf2NetworkP2pt | read-write | current | This object enable/disable Point-to-Point mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.4.2.1.22 | ColumnsnOspfIf2NetworkNonBroadcast | read-write | current | This object enable/disable non broadcast mode of this interface. |
| 1.3.6.1.4.1.1991.1.2.4.5 | NodesnOspfVirtIf | |||
| 1.3.6.1.4.1.1991.1.2.4.5.1 | TablesnOspfVirtIfTable | not-accessible | current | Information about this router's virtual interfaces. |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1 | RowsnOspfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.1 | ColumnsnOspfVirtIfAreaID | read-only | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.2 | ColumnsnOspfVirtIfNeighbor | read-only | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.3 | ColumnsnOspfVirtIfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.4 | ColumnsnOspfVirtIfRetransInterval | read-write | current | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.5 | ColumnsnOspfVirtIfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.6 | ColumnsnOspfVirtIfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.7 | ColumnsnOspfVirtIfAuthType | read-write | current | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.8 | ColumnsnOspfVirtIfAuthKey | read-write | current | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length … |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.9 | ColumnsnOspfVirtIfRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.10 | ColumnsnOspfVirtIfMd5AuthKeyId | read-write | current | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the a… |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.11 | ColumnsnOspfVirtIfMd5AuthKey | read-write | current | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.12 | ColumnsnOspfVirtIfMd5ActivationWaitTime | read-write | current | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.1991.1.2.4.5.1.1.13 | ColumnsnOspfVirtIfAreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.6 | NodesnOspfRedis | |||
| 1.3.6.1.4.1.1991.1.2.4.6.1 | TablesnOspfRedisTable | not-accessible | current | The OSPF Redistribution Table contains a list of routes that could be imported into the OSPF domain. |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1 | RowsnOspfRedisEntry | not-accessible | current | The OSPF Redistribution Entry specifies a particular RIP or Static route to be imported into the OSPF domain. |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.1 | ColumnsnOspfRedisIndex | read-only | current | The destination IP address that associates with this particular route. |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.2 | ColumnsnOspfRedisIpAddress | read-write | current | The destination IP address that associates with this particular route. |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.3 | ColumnsnOspfRedisMask | read-write | current | The Subnet Mask that pertains to this route. |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.4 | ColumnsnOspfRedisAction | read-write | current | The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF Domain. import(1): - the route is imported into OSPF D… |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.5 | ColumnsnOspfRedisProtocol | read-write | current | The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - t… |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.6 | ColumnsnOspfRedisSetOspfMetric | read-write | current | The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the OSPF metric field. enabled(1): - the route metri… |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.7 | ColumnsnOspfRedisOspfMetricValue | read-write | current | The metric of using OSPF Metric value on this route. |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.8 | ColumnsnOspfRedisMatchRipMetric | read-write | current | The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the RIP metric field. enabled(1): - the route metric… |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.9 | ColumnsnOspfRedisRipMetricValue | read-write | current | The metric of using RIP Metric value (1 to 15 hops) on this route. |
| 1.3.6.1.4.1.1991.1.2.4.6.1.1.10 | ColumnsnOspfRedisRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.4.7 | NodesnOspfNbr | |||
| 1.3.6.1.4.1.1991.1.2.4.7.1 | TablesnOspfNbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1 | RowsnOspfNbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.1 | ColumnsnOspfNbrEntryIndex | read-only | current | The table entry index of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.2 | ColumnsnOspfNbrPort | read-only | current | The physical port of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.3 | ColumnsnOspfNbrIpAddr | read-only | current | The IP address of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.4 | ColumnsnOspfNbrIndex | read-only | current | The neighbor index of each port and each IP address. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.5 | ColumnsnOspfNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.6 | ColumnsnOspfNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. … |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.7 | ColumnsnOspfNbrPriority | read-only | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.8 | ColumnsnOspfNbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.9 | ColumnsnOspfNbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.1991.1.2.4.7.1.1.10 | ColumnsnOspfNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.1991.1.2.4.8 | NodesnOspfVirtNbr | |||
| 1.3.6.1.4.1.1991.1.2.4.8.1 | TablesnOspfVirtNbrTable | not-accessible | current | A table of virtual neighbor information. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1 | RowsnOspfVirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.1 | ColumnsnOspfVirtNbrEntryIndex | read-only | current | The table entry index of this virtual neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.2 | ColumnsnOspfVirtNbrArea | read-only | current | The Transit Area Identifier. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.3 | ColumnsnOspfVirtNbrRtrId | read-only | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.4 | ColumnsnOspfVirtNbrIpAddr | read-only | current | The IP address this Virtual Neighbor is using. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.5 | ColumnsnOspfVirtNbrOptions | read-only | current | A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics… |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.6 | ColumnsnOspfVirtNbrState | read-only | current | The state of the Virtual Neighbor Relationship. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.7 | ColumnsnOspfVirtNbrEvents | read-only | current | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.8 | ColumnsnOspfVirtNbrLSRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.1991.1.2.4.8.1.1.9 | ColumnsnOspfVirtNbrAreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.9 | NodesnOspfLsdb | |||
| 1.3.6.1.4.1.1991.1.2.4.9.1 | TablesnOspfLsdbTable | not-accessible | current | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1 | RowsnOspfLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.1 | ColumnsnOspfLsdbEntryIndex | read-only | current | The table entry index of this Link State Database. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.2 | ColumnsnOspfLsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.3 | ColumnsnOspfLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.4 | ColumnsnOspfLsdbLsId | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.5 | ColumnsnOspfLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.6 | ColumnsnOspfLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.7 | ColumnsnOspfLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.8 | ColumnsnOspfLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.9 | ColumnsnOspfLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.1991.1.2.4.9.1.1.10 | ColumnsnOspfLsdbAreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.10 | NodesnOspfExtLsdb | |||
| 1.3.6.1.4.1.1991.1.2.4.10.1 | TablesnOspfExtLsdbTable | not-accessible | current | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1 | RowsnOspfExtLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.1 | ColumnsnOspfExtLsdbEntryIndex | read-only | current | The table entry index of this Link State Database. |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.2 | ColumnsnOspfExtLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.3 | ColumnsnOspfExtLsdbLsId | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.4 | ColumnsnOspfExtLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.5 | ColumnsnOspfExtLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.6 | ColumnsnOspfExtLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.7 | ColumnsnOspfExtLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.1991.1.2.4.10.1.1.8 | ColumnsnOspfExtLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.1991.1.2.4.11 | NodesnOspfAreaStatus | |||
| 1.3.6.1.4.1.1991.1.2.4.11.1 | TablesnOspfAreaStatusTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1 | RowsnOspfAreaStatusEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.1 | ColumnsnOspfAreaStatusEntryIndex | read-only | current | The table entry index of this Area. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.2 | ColumnsnOspfAreaStatusAreaId | read-only | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.3 | ColumnsnOspfAreaStatusImportASExtern | read-only | current | The area's support for importing AS external link- state advertisements. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.4 | ColumnsnOspfAreaStatusStubMetric | read-only | current | The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to ot… |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.5 | ColumnsnOspfAreaStatusSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.6 | ColumnsnOspfAreaStatusAreaBdrRtrCount | read-only | current | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.7 | ColumnsnOspfAreaStatusASBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.8 | ColumnsnOspfAreaStatusLSACount | read-only | current | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.9 | ColumnsnOspfAreaStatusLSACksumSum | read-only | current | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) lin… |
| 1.3.6.1.4.1.1991.1.2.4.11.1.1.10 | ColumnsnOspfAreaStatusAreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.12 | NodesnOspfIfStatus | |||
| 1.3.6.1.4.1.1991.1.2.4.12.1 | TablesnOspfIfStatusTable | not-accessible | current | The OSPF Interface Status Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1 | RowsnOspfIfStatusEntry | not-accessible | current | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.1 | ColumnsnOspfIfStatusEntryIndex | read-only | current | The table entry index of this Area. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.2 | ColumnsnOspfIfStatusPort | read-only | current | The physical router port of this OSPF interface. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.3 | ColumnsnOspfIfStatusIpAddress | read-only | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.4 | ColumnsnOspfIfStatusAreaId | read-only | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.5 | ColumnsnOspfIfStatusType | read-only | current | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.6 | ColumnsnOspfIfStatusAdminStat | read-only | current | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.7 | ColumnsnOspfIfStatusRtrPriority | read-only | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.8 | ColumnsnOspfIfStatusTransitDelay | read-only | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.9 | ColumnsnOspfIfStatusRetransInterval | read-only | current | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.10 | ColumnsnOspfIfStatusHelloInterval | read-only | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.11 | ColumnsnOspfIfStatusRtrDeadInterval | read-only | current | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.12 | ColumnsnOspfIfStatusState | read-only | current | The OSPF Interface State. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.13 | ColumnsnOspfIfStatusDesignatedRouter | read-only | current | The IP Address of the Designated Router. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.14 | ColumnsnOspfIfStatusBackupDesignatedRouter | read-only | current | The IP Address of the Backup Designated Router. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.15 | ColumnsnOspfIfStatusEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.16 | ColumnsnOspfIfStatusAuthType | read-only | current | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.17 | ColumnsnOspfIfStatusAuthKey | read-only | current | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.18 | ColumnsnOspfIfStatusMetricValue | read-only | current | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.19 | ColumnsnOspfIfStatusMd5AuthKeyId | read-only | current | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algor… |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.20 | ColumnsnOspfIfStatusMd5AuthKey | read-only | current | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.21 | ColumnsnOspfIfStatusMd5ActivationWaitTime | read-only | current | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.1991.1.2.4.12.1.1.22 | ColumnsnOspfIfStatusAreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.13 | NodesnOspfVirtIfStatus | |||
| 1.3.6.1.4.1.1991.1.2.4.13.1 | TablesnOspfVirtIfStatusTable | not-accessible | current | Information about this router's virtual interfaces. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1 | RowsnOspfVirtIfStatusEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.1 | ColumnsnOspfVirtIfStatusEntryIndex | read-only | current | The table entry index of this Area. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.2 | ColumnsnOspfVirtIfStatusAreaID | read-only | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.3 | ColumnsnOspfVirtIfStatusNeighbor | read-only | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.4 | ColumnsnOspfVirtIfStatusTransitDelay | read-only | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.5 | ColumnsnOspfVirtIfStatusRetransInterval | read-only | current | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.6 | ColumnsnOspfVirtIfStatusHelloInterval | read-only | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.7 | ColumnsnOspfVirtIfStatusRtrDeadInterval | read-only | current | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.8 | ColumnsnOspfVirtIfStatusState | read-only | current | The OSPF virtual interfaces states. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.9 | ColumnsnOspfVirtIfStatusEvents | read-only | current | The number of state changes or error events on this Virtual Link. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.10 | ColumnsnOspfVirtIfStatusAuthType | read-only | current | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.11 | ColumnsnOspfVirtIfStatusAuthKey | read-only | current | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length … |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.12 | ColumnsnOspfVirtIfStatusMd5AuthKeyId | read-only | current | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the a… |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.13 | ColumnsnOspfVirtIfStatusMd5AuthKey | read-only | current | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.14 | ColumnsnOspfVirtIfStatusMd5ActivationWaitTime | read-only | current | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.1991.1.2.4.13.1.1.15 | ColumnsnOspfVirtIfStatusAreaIdFormat | read-only | current | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.1991.1.2.4.14 | NodesnOspfRoutingInfo | |||
| 1.3.6.1.4.1.1991.1.2.4.14.1 | TablesnOspfRoutingInfoTable | not-accessible | current | Information about this router's routing information. |
| 1.3.6.1.4.1.1991.1.2.4.14.1.1 | RowsnOspfRoutingInfoEntry | not-accessible | current | Information about a single ABR/ASBR Routing entry. |
| 1.3.6.1.4.1.1991.1.2.4.14.1.1.1 | ColumnsnOspfRoutingInfoIndex | read-only | current | The table entry index of this Routing entry. |
| 1.3.6.1.4.1.1991.1.2.4.14.1.1.2 | ColumnsnOspfRoutingInfoRouterID | read-only | current | The Router ID of the destination router. |
| 1.3.6.1.4.1.1991.1.2.4.14.1.1.3 | ColumnsnOspfRoutingInfoRouterType | read-only | current | |
| 1.3.6.1.4.1.1991.1.2.4.14.1.1.4 | ColumnsnOspfRoutingInfoNextHopRouterID | read-only | current | The router ID of the next hop destination router. |
| 1.3.6.1.4.1.1991.1.2.4.14.1.1.5 | ColumnsnOspfRoutingInfoOutgoingInterface | read-only | current | The outgoing interface of the destination router. |
| 1.3.6.1.4.1.1991.1.2.4.15 | NodesnOspfTrapControl | |||
| 1.3.6.1.4.1.1991.1.2.4.15.1 | ScalarsnOspfSetTrap | read-write | current | A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1… |
| 1.3.6.1.4.1.1991.1.2.4.15.2 | ScalarsnOspfConfigErrorType | read-only | current | Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps. |
| 1.3.6.1.4.1.1991.1.2.4.15.3 | ScalarsnOspfPacketType | read-only | current | OSPF packet types. |
| 1.3.6.1.4.1.1991.1.2.4.15.4 | ScalarsnOspfPacketSrc | read-only | current | The IP address of an inbound packet that can- not be identified by a neighbor instance. |
| 1.3.6.1.4.1.1991.1.2.4.15.5 | ScalarsnOspfTrapsGenerationMode | read-write | current | Indicates if the generation of any OSPF traps is permitted on the router. The value 'enabled' denotes that the OSPF Traps can be generated by the router; 'disa… |
| 1.3.6.1.4.1.1991.1.2.5 | NodesnDvmrp | |||
| 1.3.6.1.4.1.1991.1.2.5.1 | NodesnDvmrpMIBObjects | |||
| 1.3.6.1.4.1.1991.1.2.5.1.1 | ScalarsnDvmrpVersion | read-only | current | The router's DVMRP version information. |
| 1.3.6.1.4.1.1991.1.2.5.1.2 | ScalarsnDvmrpEnable | read-write | current | Enable or disable DVMRP on this router. |
| 1.3.6.1.4.1.1991.1.2.5.1.3 | ScalarsnDvmrpGenerationId | read-only | current | The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent. |
| 1.3.6.1.4.1.1991.1.2.5.1.4 | ScalarsnDvmrpProbeInterval | read-write | current | This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'ena… |
| 1.3.6.1.4.1.1991.1.2.5.1.5 | ScalarsnDvmrpReportInterval | read-write | current | This is the time interval at which the router sends out full report messages. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object… |
| 1.3.6.1.4.1.1991.1.2.5.1.6 | ScalarsnDvmrpTriggerInterval | read-write | current | This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.1991.1.2.5.1.7 | ScalarsnDvmrpNeighborRouterTimeout | read-write | current | This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this objec… |
| 1.3.6.1.4.1.1991.1.2.5.1.8 | ScalarsnDvmrpRouteExpireTime | read-write | current | This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this obj… |
| 1.3.6.1.4.1.1991.1.2.5.1.9 | ScalarsnDvmrpRouteDiscardTime | read-write | current | This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this obj… |
| 1.3.6.1.4.1.1991.1.2.5.1.10 | ScalarsnDvmrpPruneAge | read-write | current | This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.1991.1.2.5.1.11 | ScalarsnDvmrpGraftRetransmitTime | read-write | current | This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. … |
| 1.3.6.1.4.1.1991.1.2.5.1.12 | ScalarsnDvmrpDefaultRoute | read-write | current | This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this defa… |
| 1.3.6.1.4.1.1991.1.2.5.1.13 | TablesnDvmrpVInterfaceTable | not-accessible | current | The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1 | RowsnDvmrpVInterfaceEntry | not-accessible | current | An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.1 | ColumnsnDvmrpVInterfaceVifIndex | read-only | current | The ifIndex value of this DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.2 | ColumnsnDvmrpVInterfaceType | read-write | current | The type of this DVMRP virtual interface, whether it uses a tunnel, a physical interface for which we are a querier, or a physical interface for which we are n… |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.3 | ColumnsnDvmrpVInterfaceOperState | read-only | current | The current operational state of this DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.4 | ColumnsnDvmrpVInterfaceLocalAddress | read-write | current | The IP address of the local end of this DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.5 | ColumnsnDvmrpVInterfaceRemoteAddress | read-write | current | The IP address of the remote end of this DVMRP virtual interface. For a tunnel, this is the IP address of the neighboring router. For a subnet, this is the sub… |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.6 | ColumnsnDvmrpVInterfaceRemoteSubnetMask | read-only | current | The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.7 | ColumnsnDvmrpVInterfaceMetric | read-write | current | The distance metric for this DVMRP virtual interface which is used to calculate distance vectors. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.8 | ColumnsnDvmrpVInterfaceTtlThreshold | read-write | current | This is the minimum time-to-live value to forward the packets out of this virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.9 | ColumnsnDvmrpVInterfaceAdvertiseLocal | read-write | current | Enable or disable the advertising of this local route. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.10 | ColumnsnDvmrpVInterfaceEncapsulation | read-write | current | Enable or disable the encapsulation of the DVMRP control packets when using IPINIP encapsulation. |
| 1.3.6.1.4.1.1991.1.2.5.1.13.1.11 | ColumnsnDvmrpVInterfaceStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.5.1.14 | TablesnDvmrpNeighborTable | not-accessible | current | The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this ta… |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1 | RowsnDvmrpNeighborEntry | not-accessible | current | An entry (conceptual row) in the snDvmrpNeighborTable. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.1 | ColumnsnDvmrpNeighborEntryIndex | read-only | current | The table entry index. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.2 | ColumnsnDvmrpNeighborVifIndex | read-only | current | The value of VifIndex for the virtual interface used to reach this DVMRP neighbor. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.3 | ColumnsnDvmrpNeighborAddress | read-only | current | The IP address of the DVMRP neighbor for which this entry contains information. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.4 | ColumnsnDvmrpNeighborUpTime | read-only | current | The time since this DVMRP neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.5 | ColumnsnDvmrpNeighborExpiryTime | read-only | current | The minimum time remaining before this DVMRP neighbor will be aged out. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.6 | ColumnsnDvmrpNeighborGenerationId | read-only | current | The neighboring router's generation identifier. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.7 | ColumnsnDvmrpNeighborMajorVersion | read-only | current | The neighboring router's major DVMRP version number. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.8 | ColumnsnDvmrpNeighborMinorVersion | read-only | current | The neighboring router's minor DVMRP version number. |
| 1.3.6.1.4.1.1991.1.2.5.1.14.1.9 | ColumnsnDvmrpNeighborCapabilities | read-only | current | This object describes the neighboring router's capabilities. The following shows the position of each bit: bit position meaning 3 mtrace bit 2 generationID bit… |
| 1.3.6.1.4.1.1991.1.2.5.1.15 | TablesnDvmrpRouteTable | not-accessible | current | The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1 | RowsnDvmrpRouteEntry | not-accessible | current | An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information. |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1.1 | ColumnsnDvmrpRouteEntryIndex | read-only | current | The table entry index. |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1.2 | ColumnsnDvmrpRouteSource | read-only | current | The network address which when combined with the corresponding value of snDvmrpRouteSourceMask identifies the sources for which this entry contains multicast r… |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1.3 | ColumnsnDvmrpRouteSourceMask | read-only | current | The network mask which when combined with the corresponding value of snDvmrpRouteSource identifies the sources for which this entry contains multicast routing … |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1.4 | ColumnsnDvmrpRouteUpstreamNeighbor | read-only | current | The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received. |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1.5 | ColumnsnDvmrpRouteVifIndex | read-only | current | The value of snDvmrpVInterfaceVifIndex for the virtual interface on which IP datagrams sent by these sources are received. |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1.6 | ColumnsnDvmrpRouteMetric | read-only | current | The distance in hops to the source subnet. |
| 1.3.6.1.4.1.1991.1.2.5.1.15.1.7 | ColumnsnDvmrpRouteExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.1991.1.2.5.1.16 | TablesnDvmrpRouteNextHopTable | not-accessible | current | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' befor… |
| 1.3.6.1.4.1.1991.1.2.5.1.16.1 | RowsnDvmrpRouteNextHopEntry | not-accessible | current | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed. |
| 1.3.6.1.4.1.1991.1.2.5.1.16.1.1 | ColumnsnDvmrpRouteNextHopSource | read-only | current | The network address which when combined with the corresponding value of snDvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a n… |
| 1.3.6.1.4.1.1991.1.2.5.1.16.1.2 | ColumnsnDvmrpRouteNextHopSourceMask | read-only | current | The network mask which when combined with the corresponding value of snDvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop… |
| 1.3.6.1.4.1.1991.1.2.5.1.16.1.3 | ColumnsnDvmrpRouteNextHopVifIndex | read-only | current | The snDvmrpVInterfaceVifIndex value of the virtual interface for the outgoing interface for this next hop. |
| 1.3.6.1.4.1.1991.1.2.5.1.16.1.4 | ColumnsnDvmrpRouteNextHopType | read-only | current | Type is leaf if no neighbors exist on the outgoing virtual interface. Otherwise, type is branch. |
| 1.3.6.1.4.1.1991.1.2.5.1.17 | TablesnDvmrpVIfStatTable | not-accessible | current | The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1 | RowsnDvmrpVIfStatEntry | not-accessible | current | An entry (conceptual row) in the snDvmrpVIfStatTable. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.1 | ColumnsnDvmrpVIfStatVifIndex | read-only | current | The ifIndex value of this DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.2 | ColumnsnDvmrpVIfStatInPkts | read-only | current | The number of packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.3 | ColumnsnDvmrpVIfStatOutPkts | read-only | current | The number of packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.4 | ColumnsnDvmrpVIfStatInOctets | read-only | current | The number of octets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.5 | ColumnsnDvmrpVIfStatOutOctets | read-only | current | The number of octets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.6 | ColumnsnDvmrpVIfStatInProbePkts | read-only | current | The number of probe packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.7 | ColumnsnDvmrpVIfStatOutProbePkts | read-only | current | The number of probe packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.8 | ColumnsnDvmrpVIfStatDiscardProbePkts | read-only | current | The number of probe packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.9 | ColumnsnDvmrpVIfStatInRtUpdatePkts | read-only | current | The number of route update packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.10 | ColumnsnDvmrpVIfStatOutRtUpdatePkts | read-only | current | The number of route update packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.11 | ColumnsnDvmrpVIfStatDiscardRtUpdatePkts | read-only | current | The number of route update packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.12 | ColumnsnDvmrpVIfStatInGraftPkts | read-only | current | The number of graft packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.13 | ColumnsnDvmrpVIfStatOutGraftPkts | read-only | current | The number of graft packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.14 | ColumnsnDvmrpVIfStatDiscardGraftPkts | read-only | current | The number of graft packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.15 | ColumnsnDvmrpVIfStatInGraftAckPkts | read-only | current | The number of graft acknowledge packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.16 | ColumnsnDvmrpVIfStatOutGraftAckPkts | read-only | current | The number of graft acknowledge packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.17 | ColumnsnDvmrpVIfStatDiscardGraftAckPkts | read-only | current | The number of graft acknowledge packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.18 | ColumnsnDvmrpVIfStatInPrunePkts | read-only | current | The number of prune packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.19 | ColumnsnDvmrpVIfStatOutPrunePkts | read-only | current | The number of prune packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.5.1.17.1.20 | ColumnsnDvmrpVIfStatDiscardPrunePkts | read-only | current | The number of prune packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.1991.1.2.6 | NodesnIgmp | |||
| 1.3.6.1.4.1.1991.1.2.7 | NodesnFsrp | |||
| 1.3.6.1.4.1.1991.1.2.7.1 | NodesnFsrpGlobal | |||
| 1.3.6.1.4.1.1991.1.2.7.1.1 | ScalarsnFsrpGroupOperMode | read-write | current | The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activ… |
| 1.3.6.1.4.1.1991.1.2.7.1.2 | ScalarsnFsrpIfStateChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate FSRP interface state change traps. |
| 1.3.6.1.4.1.1991.1.2.7.2 | NodesnFsrpIntf | |||
| 1.3.6.1.4.1.1991.1.2.7.2.1 | TablesnFsrpIfTable | not-accessible | current | The FSRP Interface Table describes the interfaces from the viewpoint of FSRP. |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1 | RowsnFsrpIfEntry | not-accessible | current | The FSRP Interface Entry describes one interface from the viewpoint of FSRP. |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.1 | ColumnsnFsrpIfPort | read-only | current | The physical router port of this FSRP interface. |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.2 | ColumnsnFsrpIfIpAddress | read-only | current | The IP Address of the physical router port of this interface. |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.3 | ColumnsnFsrpIfVirRtrIpAddr | read-write | current | The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function c… |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.4 | ColumnsnFsrpIfOtherRtrIpAddr | read-write | current | The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be … |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.5 | ColumnsnFsrpIfPreferLevel | read-write | current | The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher … |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.6 | ColumnsnFsrpIfTrackPortMask | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is… |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.7 | ColumnsnFsrpIfRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.8 | ColumnsnFsrpIfState | read-only | current | This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. act… |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.9 | ColumnsnFsrpIfKeepAliveTime | read-write | current | The heart-beat is from 1 to 120 seconds. |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.10 | ColumnsnFsrpIfRouterDeadTime | read-write | current | The hold time of the Fsrp router is from 3 to 255 seconds. |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.11 | ColumnsnFsrpIfChassisTrackPortMask | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is… |
| 1.3.6.1.4.1.1991.1.2.7.2.1.1.12 | ColumnsnFsrpIfTrackPortList | read-write | current | This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the s… |
| 1.3.6.1.4.1.1991.1.2.8 | NodesnGblRt | |||
| 1.3.6.1.4.1.1991.1.2.8.1 | NodesnGblRtGeneral | |||
| 1.3.6.1.4.1.1991.1.2.8.1.1 | ScalarsnGblRtRouteOnly | read-write | current | If this object is 'enabled', this switching router will only route packets. If this object is 'disabled', this switching router will first route packets. If ro… |
| 1.3.6.1.4.1.1991.1.2.9 | NodesnPim | |||
| 1.3.6.1.4.1.1991.1.2.9.1 | NodesnPimMIBObjects | |||
| 1.3.6.1.4.1.1991.1.2.9.1.1 | ScalarsnPimEnable | read-write | current | Enable or disable PIM on this router. |
| 1.3.6.1.4.1.1991.1.2.9.1.2 | ScalarsnPimNeighborRouterTimeout | read-write | current | This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object … |
| 1.3.6.1.4.1.1991.1.2.9.1.3 | ScalarsnPimHelloTime | read-write | current | This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbour… |
| 1.3.6.1.4.1.1991.1.2.9.1.4 | ScalarsnPimPruneTime | read-write | current | This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. Fo… |
| 1.3.6.1.4.1.1991.1.2.9.1.5 | ScalarsnPimGraftRetransmitTime | read-write | current | This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. … |
| 1.3.6.1.4.1.1991.1.2.9.1.6 | ScalarsnPimInactivityTime | read-write | current | This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep th… |
| 1.3.6.1.4.1.1991.1.2.9.1.7 | TablesnPimVInterfaceTable | not-accessible | current | The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1 | RowsnPimVInterfaceEntry | not-accessible | current | An entry (conceptual row) in the snPimVInterfaceTable. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.1 | ColumnsnPimVInterfaceVifIndex | read-only | current | The ifIndex value of this PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.2 | ColumnsnPimVInterfaceType | read-write | current | The type of PIM virtual interface, whether it uses a tunnel or a physical interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.3 | ColumnsnPimVInterfaceLocalAddress | read-write | current | The IP address of the local end of this PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.4 | ColumnsnPimVInterfaceLocalSubnetMask | read-only | current | The network mask for the IP address of the PIM virtual interface. For a tunnel, this should be 0.0.0.0. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.5 | ColumnsnPimVInterfaceRemoteAddress | read-write | current | The IP address of the remote end of this PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.6 | ColumnsnPimVInterfaceDR | read-only | current | The Designated Router on this PIM virtual interface. For point-to-point interfaces, this object has the value 0.0.0.0. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.7 | ColumnsnPimVInterfaceTtlThreshold | read-write | current | This is the minimum time-to-live value to forward the packets out of this interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.8 | ColumnsnPimVInterfaceStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.9.1.7.1.9 | ColumnsnPimVInterfaceMode | read-write | current | The configured mode of this PIM interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.8 | TablesnPimNeighborTable | not-accessible | current | The (conceptual) table listing the router's PIM neighbors. snPimEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.1991.1.2.9.1.8.1 | RowsnPimNeighborEntry | not-accessible | current | An entry (conceptual row) in the snPimNeighborTable. |
| 1.3.6.1.4.1.1991.1.2.9.1.8.1.1 | ColumnsnPimNeighborEntryIndex | read-only | current | The table entry index. |
| 1.3.6.1.4.1.1991.1.2.9.1.8.1.2 | ColumnsnPimNeighborVifIndex | read-only | current | The value of VifIndex for the virtual interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.1991.1.2.9.1.8.1.3 | ColumnsnPimNeighborAddress | read-only | current | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.1991.1.2.9.1.8.1.4 | ColumnsnPimNeighborUpTime | read-only | current | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.1991.1.2.9.1.8.1.5 | ColumnsnPimNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.1991.1.2.9.1.9 | TablesnPimVIfStatTable | not-accessible | current | The (conceptual) table listing the router's PIM virtual interface statistical counters. snPimEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1 | RowsnPimVIfStatEntry | not-accessible | current | An entry (conceptual row) in the snPimVIfStatTable. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.1 | ColumnsnPimVIfStatVifIndex | read-only | current | The ifIndex value of this PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.2 | ColumnsnPimVIfStatInJoinPkts | read-only | current | The number of join packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.3 | ColumnsnPimVIfStatOutJoinPkts | read-only | current | The number of join packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.4 | ColumnsnPimVIfStatDiscardJoinPkts | read-only | current | The number of join packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.5 | ColumnsnPimVIfStatInPrunePkts | read-only | current | The number of prune packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.6 | ColumnsnPimVIfStatOutPrunePkts | read-only | current | The number of prune packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.7 | ColumnsnPimVIfStatDiscardPrunePkts | read-only | current | The number of prune packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.8 | ColumnsnPimVIfStatInAssertPkts | read-only | current | The number of assert packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.9 | ColumnsnPimVIfStatOutAssertPkts | read-only | current | The number of assert packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.10 | ColumnsnPimVIfStatDiscardAssertPkts | read-only | current | The number of assert packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.11 | ColumnsnPimVIfStatInHelloPkts | read-only | current | The number of hello packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.12 | ColumnsnPimVIfStatOutHelloPkts | read-only | current | The number of hello packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.13 | ColumnsnPimVIfStatDiscardHelloPkts | read-only | current | The number of hello packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.14 | ColumnsnPimVIfStatInGraftPkts | read-only | current | The number of graft packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.15 | ColumnsnPimVIfStatOutGraftPkts | read-only | current | The number of graft packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.16 | ColumnsnPimVIfStatDiscardGraftPkts | read-only | current | The number of graft packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.17 | ColumnsnPimVIfStatInGraftAckPkts | read-only | current | The number of graft acknowledge packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.18 | ColumnsnPimVIfStatOutGraftAckPkts | read-only | current | The number of graft acknowledge packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.1.9.1.19 | ColumnsnPimVIfStatDiscardGraftAckPkts | read-only | current | The number of graft acknowledge packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.1991.1.2.9.2 | NodesnPimSMMIBObjects | |||
| 1.3.6.1.4.1.1991.1.2.9.2.1 | ScalarsnPimJoinPruneInterval | read-write | current | The default interval in seconds at which periodic PIM-SM Join/Prune messages are to be sent. snPimEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.1991.1.2.9.2.2 | TablesnPimCandidateBSRTable | not-accessible | current | Candidate Bootstrap Router information. |
| 1.3.6.1.4.1.1991.1.2.9.2.2.1 | RowsnPimCandidateBSREntry | not-accessible | current | An entry (conceptual row) in the snPimCandidateBSRTable. |
| 1.3.6.1.4.1.1991.1.2.9.2.2.1.1 | ColumnsnPimCandidateBSRPortID | read-write | current | The IP address of the PIM interface. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. |
| 1.3.6.1.4.1.1991.1.2.9.2.2.1.2 | ColumnsnPimCandidateBSRIPAddress | read-only | current | The (unicast) address of the Candidate BSR. |
| 1.3.6.1.4.1.1991.1.2.9.2.2.1.3 | ColumnsnPimCandidateBSRHashMaskLen | read-write | current | The hash mask value for this router as a candidate bootstrap router. |
| 1.3.6.1.4.1.1991.1.2.9.2.2.1.4 | ColumnsnPimCandidateBSRPreference | read-write | current | The preference value for this router as a candidate bootstrap router. |
| 1.3.6.1.4.1.1991.1.2.9.2.3 | TablesnPimRPSetTable | not-accessible | current | The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this informatio… |
| 1.3.6.1.4.1.1991.1.2.9.2.3.1 | RowsnPimRPSetEntry | not-accessible | current | An entry (conceptual row) in the snPimRPSetTable. |
| 1.3.6.1.4.1.1991.1.2.9.2.3.1.1 | ColumnsnPimRPSetGroupAddress | read-only | current | The IP multicast group address which, when combined with snPimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candid… |
| 1.3.6.1.4.1.1991.1.2.9.2.3.1.2 | ColumnsnPimRPSetMask | read-only | current | The multicast group address mask which, when combined with snPimRPSetGroupAddress, gives the group prefix for which this entry contains information about the C… |
| 1.3.6.1.4.1.1991.1.2.9.2.3.1.3 | ColumnsnPimRPSetIPAddress | read-only | current | The IP address of the Candidate-RP. |
| 1.3.6.1.4.1.1991.1.2.9.2.3.1.4 | ColumnsnPimRPSetHoldTime | read-only | current | The holdtime, in seconds, of a Candidate-RP. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.1991.1.2.9.2.4 | TablesnPimCandidateRPTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP. If this table is empty, then the lo… |
| 1.3.6.1.4.1.1991.1.2.9.2.4.1 | RowsnPimCandidateRPEntry | not-accessible | current | An entry (conceptual row) in the snPimCandidateRPTable. |
| 1.3.6.1.4.1.1991.1.2.9.2.4.1.1 | ColumnsnPimCandidateRPGroupAddress | read-only | current | The IP multicast group address which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself … |
| 1.3.6.1.4.1.1991.1.2.9.2.4.1.2 | ColumnsnPimCandidateRPMask | read-only | current | The multicast group address mask which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itsel… |
| 1.3.6.1.4.1.1991.1.2.9.2.4.1.3 | ColumnsnPimCandidateRPIPAddress | read-write | current | The (unicast) address of the interface which will be advertised as a Candidate-RP. |
| 1.3.6.1.4.1.1991.1.2.9.2.4.1.4 | ColumnsnPimCandidateRPRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. This object is used to create and delete row in the table … |
| 1.3.6.1.4.1.1991.1.2.10 | NodesnAppleTalk | |||
| 1.3.6.1.4.1.1991.1.2.11 | IdentitysnBgp4 | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.2.11.1 | NodesnBgp4Gen | |||
| 1.3.6.1.4.1.1991.1.2.11.1.1 | ScalarsnBgp4GenAlwaysCompareMed | read-write | current | To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. |
| 1.3.6.1.4.1.1991.1.2.11.1.2 | ScalarsnBgp4GenAutoSummary | read-write | current | To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.3 | ScalarsnBgp4GenDefaultLocalPreference | read-write | deprecated | To set the default local preference attribute.This is deprecated and snBgp4GenDefaultLocalPreference1 is introduced. |
| 1.3.6.1.4.1.1991.1.2.11.1.4 | ScalarsnBgp4GenDefaultInfoOriginate | read-write | current | To enable/disable the default Information Originate. |
| 1.3.6.1.4.1.1991.1.2.11.1.5 | ScalarsnBgp4GenFastExternalFallover | read-write | current | To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down. |
| 1.3.6.1.4.1.1991.1.2.11.1.6 | ScalarsnBgp4GenNextBootNeighbors | read-write | current | The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBg… |
| 1.3.6.1.4.1.1991.1.2.11.1.7 | ScalarsnBgp4GenNextBootRoutes | read-write | current | The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes. |
| 1.3.6.1.4.1.1991.1.2.11.1.8 | ScalarsnBgp4GenSynchronization | read-write | current | To enable/disable the synchronization between BGP and your IGP. |
| 1.3.6.1.4.1.1991.1.2.11.1.9 | ScalarsnBgp4GenKeepAliveTime | read-write | current | The Keep alive timer. |
| 1.3.6.1.4.1.1991.1.2.11.1.10 | ScalarsnBgp4GenHoldTime | read-write | current | The Hold time timer. |
| 1.3.6.1.4.1.1991.1.2.11.1.11 | ScalarsnBgp4GenRouterId | read-write | current | BGP Router Id. |
| 1.3.6.1.4.1.1991.1.2.11.1.12 | ScalarsnBgp4GenTableMap | read-write | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.1.13 | ScalarsnBgp4GenAdminStat | read-write | current | The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing o… |
| 1.3.6.1.4.1.1991.1.2.11.1.14 | ScalarsnBgp4GenDefaultMetric | read-write | deprecated | To set default metric values for the BGP4 protocol.This is deprecated and snBgp4GenDefaultMetric1 is introduced. |
| 1.3.6.1.4.1.1991.1.2.11.1.15 | ScalarsnBgp4GenMaxNeighbors | read-only | current | The maximum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.16 | ScalarsnBgp4GenMinNeighbors | read-only | current | The minimum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.17 | ScalarsnBgp4GenMaxRoutes | read-only | current | The maximum configured number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.18 | ScalarsnBgp4GenMinRoutes | read-only | current | The minimum configured number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.19 | ScalarsnBgp4GenMaxAddrFilters | read-only | current | The maximum configured number of BGP4 address filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.20 | ScalarsnBgp4GenMaxAggregateAddresses | read-only | current | The maximum configured number of BGP4 aggregate addresses. |
| 1.3.6.1.4.1.1991.1.2.11.1.21 | ScalarsnBgp4GenMaxAsPathFilters | read-only | current | The maximum configured number of BGP4 AS-PATH filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.22 | ScalarsnBgp4GenMaxCommunityFilters | read-only | current | The maximum configured number of BGP4 Community filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.23 | ScalarsnBgp4GenMaxNetworks | read-only | current | The maximum configured number of BGP4 Networks. |
| 1.3.6.1.4.1.1991.1.2.11.1.24 | ScalarsnBgp4GenMaxRouteMapFilters | read-only | current | The maximum configured number of BGP4 Route-map Filters. |
| 1.3.6.1.4.1.1991.1.2.11.1.25 | ScalarsnBgp4GenNeighPrefixMinValue | read-only | current | The minimum configured value of BGP4 Neighbor Prefix. |
| 1.3.6.1.4.1.1991.1.2.11.1.26 | ScalarsnBgp4GenOperNeighbors | read-only | current | The current operational max number of neighbors configured for a BGP Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.27 | ScalarsnBgp4GenOperRoutes | read-only | current | The current operational number of Routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.28 | ScalarsnBgp4GenLocalAs | read-write | current | Bgp4 local autonomous system number. |
| 1.3.6.1.4.1.1991.1.2.11.1.29 | ScalarsnBgp4GenRoutesInstalled | read-only | current | Bgp4 installed routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.30 | ScalarsnBgp4GenAsPathInstalled | read-only | current | Bgp4 installed autonomous system path. |
| 1.3.6.1.4.1.1991.1.2.11.1.31 | ScalarsnBgp4ExternalDistance | read-write | current | Administrative distance for BGP external routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.32 | ScalarsnBgp4InternalDistance | read-write | current | Administrative distance for BGP internal routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.33 | ScalarsnBgp4LocalDistance | read-write | current | Administrative distance for BGP local routes. |
| 1.3.6.1.4.1.1991.1.2.11.1.34 | ScalarsnBgp4OperNumOfAttributes | read-only | current | The operational number of attribute entries. |
| 1.3.6.1.4.1.1991.1.2.11.1.35 | ScalarsnBgp4NextBootMaxAttributes | read-write | current | The next boot maximum attribute entries. 10000 means reset to default. |
| 1.3.6.1.4.1.1991.1.2.11.1.36 | ScalarsnBgp4ClusterId | read-write | current | A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. |
| 1.3.6.1.4.1.1991.1.2.11.1.37 | ScalarsnBgp4ClientToClientReflection | read-write | current | To enable/disable the client to client reflection in BGP4. |
| 1.3.6.1.4.1.1991.1.2.11.1.38 | ScalarsnBgp4GenTotalNeighbors | read-only | current | The current total number of neighbors running in a BGP Group. |
| 1.3.6.1.4.1.1991.1.2.11.1.39 | ScalarsnBgp4GenMaxPaths | read-write | current | The maximum configured number of Paths. |
| 1.3.6.1.4.1.1991.1.2.11.1.40 | ScalarsnBgp4GenConfedId | read-write | current | Bgp4 Confederation Id. |
| 1.3.6.1.4.1.1991.1.2.11.1.41 | ScalarsnBgp4GenConfedPeers | read-write | current | An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.1.42 | ScalarsnBgp4GenDampening | read-write | current | The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes … |
| 1.3.6.1.4.1.1991.1.2.11.1.43 | ScalarsnBgp4GenDampenHalfLife | read-write | current | Bgp4 Dampening Half Life. |
| 1.3.6.1.4.1.1991.1.2.11.1.44 | ScalarsnBgp4GenDampenReuse | read-write | current | Bgp4 Dampening Reuse. |
| 1.3.6.1.4.1.1991.1.2.11.1.45 | ScalarsnBgp4GenDampenSuppress | read-write | current | Bgp4 Dampening Suppress. |
| 1.3.6.1.4.1.1991.1.2.11.1.46 | ScalarsnBgp4GenDampenMaxSuppress | read-write | current | Bgp4 Dampening Max Suppress Time. |
| 1.3.6.1.4.1.1991.1.2.11.1.47 | ScalarsnBgp4GenDampenMap | read-write | current | An octet string of the route-map name for dampening, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.1.48 | ScalarsnBgp4GenLocalAs4 | read-write | current | BGP4 local autonomous system (AS) number to support 4 byte AS format. |
| 1.3.6.1.4.1.1991.1.2.11.1.49 | ScalarsnBgp4GenDefaultMetric1 | read-write | current | To set default metric values for the BGP4 protocol. |
| 1.3.6.1.4.1.1991.1.2.11.1.50 | ScalarsnBgp4GenDefaultLocalPreference1 | read-write | current | To set the default local preference attribute. |
| 1.3.6.1.4.1.1991.1.2.11.2 | NodesnBgp4AddrFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.2.1 | TablesnBgp4AddrFilterTable | not-accessible | current | Bgp4 Address Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1 | RowsnBgp4AddrFilterEntry | not-accessible | current | An entry in the Bgp4 Address Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.1 | ColumnsnBgp4AddrFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.2 | ColumnsnBgp4AddrFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.3 | ColumnsnBgp4AddrFilterSourceIp | read-write | current | Source IP address. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.4 | ColumnsnBgp4AddrFilterSourceMask | read-write | current | Source IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.5 | ColumnsnBgp4AddrFilterDestIp | read-write | current | Destination IP address. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.6 | ColumnsnBgp4AddrFilterDestMask | read-write | current | Destination IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.11.2.1.1.7 | ColumnsnBgp4AddrFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.3 | NodesnBgp4AggregateAddr | |||
| 1.3.6.1.4.1.1991.1.2.11.3.1 | TablesnBgp4AggregateAddrTable | not-accessible | current | Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1 | RowsnBgp4AggregateAddrEntry | not-accessible | current | An entry in the Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.1 | ColumnsnBgp4AggregateAddrIp | read-only | current | Aggregate Address IP address. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.2 | ColumnsnBgp4AggregateAddrMask | read-only | current | Aggregate Address IP subnet mask. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.3 | ColumnsnBgp4AggregateAddrOption | read-only | current | address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table. |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.4 | ColumnsnBgp4AggregateAddrMap | read-write | current | This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only tw… |
| 1.3.6.1.4.1.1991.1.2.11.3.1.1.5 | ColumnsnBgp4AggregateAddrRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.4 | NodesnBgp4AsPathFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.4.1 | TablesnBgp4AsPathFilterTable | not-accessible | current | Bgp4 AS-Path Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1 | RowsnBgp4AsPathFilterEntry | not-accessible | current | An entry in the Bgp4 As-path Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.1 | ColumnsnBgp4AsPathFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.2 | ColumnsnBgp4AsPathFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.3 | ColumnsnBgp4AsPathFilterRegExpression | read-write | current | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.4.1.1.4 | ColumnsnBgp4AsPathFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.5 | NodesnBgp4CommunityFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.5.1 | TablesnBgp4CommunityFilterTable | not-accessible | current | Bgp4 Community Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1 | RowsnBgp4CommunityFilterEntry | not-accessible | current | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.1 | ColumnsnBgp4CommunityFilterIndex | read-only | current | The table index for a filter entry. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.2 | ColumnsnBgp4CommunityFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.3 | ColumnsnBgp4CommunityFilterCommNum | read-write | current | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.4 | ColumnsnBgp4CommunityFilterInternet | read-write | current | Disabled/Enabled the Internet Community. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.5 | ColumnsnBgp4CommunityFilterNoAdvertise | read-write | current | Do not advertise this route to any peer (internal or external). |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.6 | ColumnsnBgp4CommunityFilterNoExport | read-write | current | Do not advertise this route to an EBGP peer. |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.7 | ColumnsnBgp4CommunityFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.5.1.1.8 | ColumnsnBgp4CommunityFilterLocalAs | read-write | current | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. |
| 1.3.6.1.4.1.1991.1.2.11.6 | NodesnBgp4NeighGenCfg | |||
| 1.3.6.1.4.1.1991.1.2.11.6.1 | TablesnBgp4NeighGenCfgTable | not-accessible | current | Bgp4 Neighbor General Configuration table. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1 | RowsnBgp4NeighGenCfgEntry | not-accessible | current | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.1 | ColumnsnBgp4NeighGenCfgNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.2 | ColumnsnBgp4NeighGenCfgAdvertlevel | read-write | current | To set the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.3 | ColumnsnBgp4NeighGenCfgDefOriginate | read-write | current | To enable/disable the default originate for this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.4 | ColumnsnBgp4NeighGenCfgEbgpMultihop | read-write | current | To enable/disable the EBGP Muitihop for this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.5 | ColumnsnBgp4NeighGenCfgMaxPrefix | read-write | current | To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.6 | ColumnsnBgp4NeighGenCfgNextHopSelf | read-write | current | To enable/disable the next-hop processing of BGP updates on the router. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.7 | ColumnsnBgp4NeighGenCfgRemoteAs | read-write | current | To specify a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.8 | ColumnsnBgp4NeighGenCfgSendComm | read-write | current | To specify that a COMMUNITES attribute should be sent to a BGP neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.9 | ColumnsnBgp4NeighGenCfgWeight | read-write | current | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.10 | ColumnsnBgp4NeighGenCfgWeightFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.11 | ColumnsnBgp4NeighGenCfgRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.12 | ColumnsnBgp4NeighGenCfgUpdateSrcLpbIntf | read-write | current | To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment t… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.13 | ColumnsnBgp4NeighGenCfgRouteRefClient | read-write | current | To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer… |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.14 | ColumnsnBgp4NeighGenCfgRemovePrivateAs | read-write | current | To enable/disable filtering private AS number. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.15 | ColumnsnBgp4NeighGenCfgEbgpMultihopTtl | read-write | current | The EBGP Muitihop TTL for this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.16 | ColumnsnBgp4NeighGenCfgShutdown | read-write | current | To enable/disable BGP4 Nbr Shutdown. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.17 | ColumnsnBgp4NeighGenCfgKeepAliveTime | read-write | current | The Keep alive timer. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.18 | ColumnsnBgp4NeighGenCfgHoldTime | read-write | current | The Hold time timer. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.19 | ColumnsnBgp4NeighGenCfgDefOrigMap | read-write | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.20 | ColumnsnBgp4NeighGenCfgDesc | read-write | current | An octet string of the neighbor description. |
| 1.3.6.1.4.1.1991.1.2.11.6.1.1.21 | ColumnsnBgp4NeighGenCfgPass | read-write | current | An octet string of the neighbor Md5 password. |
| 1.3.6.1.4.1.1991.1.2.11.7 | NodesnBgp4NeighDistGroup | |||
| 1.3.6.1.4.1.1991.1.2.11.7.1 | TablesnBgp4NeighDistGroupTable | not-accessible | current | Bgp4 Neighbor Distribute Group table. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1 | RowsnBgp4NeighDistGroupEntry | not-accessible | current | An entry in the Bgp4 Distribute Group table. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.1 | ColumnsnBgp4NeighDistGroupNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.2 | ColumnsnBgp4NeighDistGroupDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.3 | ColumnsnBgp4NeighDistGroupAccessList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.4 | ColumnsnBgp4NeighDistGroupRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.5 | ColumnsnBgp4NeighDistGroupInFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.6 | ColumnsnBgp4NeighDistGroupOutFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.7 | ColumnsnBgp4NeighDistGroupInIpAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.8 | ColumnsnBgp4NeighDistGroupOutIpAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.9 | ColumnsnBgp4NeighDistGroupInPrefixList | read-write | current | A Prefix name list. |
| 1.3.6.1.4.1.1991.1.2.11.7.1.1.10 | ColumnsnBgp4NeighDistGroupOutPrefixList | read-write | current | A Prefix name list. |
| 1.3.6.1.4.1.1991.1.2.11.8 | NodesnBgp4NeighFilterGroup | |||
| 1.3.6.1.4.1.1991.1.2.11.8.1 | TablesnBgp4NeighFilterGroupTable | not-accessible | current | Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1 | RowsnBgp4NeighFilterGroupEntry | not-accessible | current | An entry in the Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.1 | ColumnsnBgp4NeighFilterGroupNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.2 | ColumnsnBgp4NeighFilterGroupDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.3 | ColumnsnBgp4NeighFilterGroupAccessList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.4 | ColumnsnBgp4NeighFilterGroupRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.5 | ColumnsnBgp4NeighFilterGroupInFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.6 | ColumnsnBgp4NeighFilterGroupOutFilterList | read-write | current | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.7 | ColumnsnBgp4NeighFilterGroupInAsPathAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.8 | ColumnsnBgp4NeighFilterGroupOutAsPathAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.9 | ColumnsnBgp4NeighFilterGroupWeight | read-write | current | To assign a weight to a neighbor filter. |
| 1.3.6.1.4.1.1991.1.2.11.8.1.1.10 | ColumnsnBgp4NeighFilterGroupWeightAccessList | read-write | current | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.9 | NodesnBgp4NeighRouteMap | |||
| 1.3.6.1.4.1.1991.1.2.11.9.1 | TablesnBgp4NeighRouteMapTable | not-accessible | current | Bgp4 Neighbor Route Map table. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1 | RowsnBgp4NeighRouteMapEntry | not-accessible | current | An entry in the Bgp4 Route Map table. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.1 | ColumnsnBgp4NeighRouteMapNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.2 | ColumnsnBgp4NeighRouteMapDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.3 | ColumnsnBgp4NeighRouteMapMapName | read-write | current | An octet string of the route-map name, Each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.9.1.1.4 | ColumnsnBgp4NeighRouteMapRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.10 | NodesnBgp4Network | |||
| 1.3.6.1.4.1.1991.1.2.11.10.1 | TablesnBgp4NetworkTable | not-accessible | current | Bgp4 Network Weight table. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1 | RowsnBgp4NetworkEntry | not-accessible | current | An entry in the Bgp4 Network Weight table. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.1 | ColumnsnBgp4NetworkIp | read-only | current | The IP Address for a network entry. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.2 | ColumnsnBgp4NetworkSubnetMask | read-only | current | The subnet mask for a network entry. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.3 | ColumnsnBgp4NetworkWeight | read-write | current | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.4 | ColumnsnBgp4NetworkBackdoor | read-write | current | To enable/disable the backdoor for this network. |
| 1.3.6.1.4.1.1991.1.2.11.10.1.1.5 | ColumnsnBgp4NetworkRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.11 | NodesnBgp4Redis | |||
| 1.3.6.1.4.1.1991.1.2.11.11.1 | TablesnBgp4RedisTable | not-accessible | current | The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1 | RowsnBgp4RedisEntry | not-accessible | current | The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.1 | ColumnsnBgp4RedisProtocol | read-only | current | The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the conne… |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.2 | ColumnsnBgp4RedisMetric | read-write | current | The metric of using the specified protocol Metric value. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.3 | ColumnsnBgp4RedisRouteMap | read-write | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.4 | ColumnsnBgp4RedisWeight | read-write | current | To assign a weight for the specified protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.5 | ColumnsnBgp4RedisMatchInternal | read-write | current | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.6 | ColumnsnBgp4RedisMatchExternal1 | read-write | current | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.7 | ColumnsnBgp4RedisMatchExternal2 | read-write | current | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.1991.1.2.11.11.1.1.8 | ColumnsnBgp4RedisRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.12 | NodesnBgp4RouteMapFilter | |||
| 1.3.6.1.4.1.1991.1.2.11.12.1 | TablesnBgp4RouteMapFilterTable | not-accessible | current | Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1 | RowsnBgp4RouteMapFilterEntry | not-accessible | current | An entry in the Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.1 | ColumnsnBgp4RouteMapFilterMapName | read-only | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.2 | ColumnsnBgp4RouteMapFilterSequenceNum | read-only | current | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.3 | ColumnsnBgp4RouteMapFilterAction | read-write | current | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.1991.1.2.11.12.1.1.4 | ColumnsnBgp4RouteMapFilterRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.13 | NodesnBgp4RouteMapMatch | |||
| 1.3.6.1.4.1.1991.1.2.11.13.1 | TablesnBgp4RouteMapMatchTable | not-accessible | current | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1 | RowsnBgp4RouteMapMatchEntry | not-accessible | current | An entry in the Bgp4 Route Map Match table. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.1 | ColumnsnBgp4RouteMapMatchMapName | read-only | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.2 | ColumnsnBgp4RouteMapMatchSequenceNum | read-only | current | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.3 | ColumnsnBgp4RouteMapMatchAsPathFilter | read-write | current | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.4 | ColumnsnBgp4RouteMapMatchCommunityFilter | read-write | current | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.5 | ColumnsnBgp4RouteMapMatchAddressFilter | read-write | current | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.6 | ColumnsnBgp4RouteMapMatchMetric | read-write | current | To match a metric for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.7 | ColumnsnBgp4RouteMapMatchNextHopList | read-write | current | A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.8 | ColumnsnBgp4RouteMapMatchRouteType | read-write | current | To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.9 | ColumnsnBgp4RouteMapMatchTagList | read-write | current | To match a BGP tag access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.10 | ColumnsnBgp4RouteMapMatchRowMask | read-write | current | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchE… |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.11 | ColumnsnBgp4RouteMapMatchAsPathAccessList | read-write | current | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.12 | ColumnsnBgp4RouteMapMatchCommunityList | read-write | current | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.13 | ColumnsnBgp4RouteMapMatchAddressAccessList | read-write | current | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.14 | ColumnsnBgp4RouteMapMatchAddressPrefixList | read-write | current | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.15 | ColumnsnBgp4RouteMapMatchNextHopAccessList | read-write | current | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.13.1.1.16 | ColumnsnBgp4RouteMapMatchNextHopPrefixList | read-write | current | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.1991.1.2.11.14 | NodesnBgp4RouteMapSet | |||
| 1.3.6.1.4.1.1991.1.2.11.14.1 | TablesnBgp4RouteMapSetTable | not-accessible | current | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1 | RowsnBgp4RouteMapSetEntry | not-accessible | current | An entry in the Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.1 | ColumnsnBgp4RouteMapSetMapName | read-only | current | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.2 | ColumnsnBgp4RouteMapSetSequenceNum | read-only | current | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.3 | ColumnsnBgp4RouteMapSetAsPathType | read-write | current | To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from s… |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.4 | ColumnsnBgp4RouteMapSetAsPathString | read-write | current | as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1). |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.5 | ColumnsnBgp4RouteMapSetAutoTag | read-write | current | To enable/disable the automatic-tag for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.6 | ColumnsnBgp4RouteMapSetCommunityType | read-write | current | To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 a… |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.7 | ColumnsnBgp4RouteMapSetCommunityNum | read-write | deprecated | community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0). |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.8 | ColumnsnBgp4RouteMapSetCommunityAdditive | read-write | current | To add the community to the already existing communities. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.9 | ColumnsnBgp4RouteMapSetLocalPreference | read-write | current | To modify a local-preference for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.10 | ColumnsnBgp4RouteMapSetMetric | read-write | current | To modify a metric for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.11 | ColumnsnBgp4RouteMapSetNextHop | read-write | current | To modify the IP address of the next hop for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.12 | ColumnsnBgp4RouteMapSetOrigin | read-write | current | To set the BGP origin code. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.13 | ColumnsnBgp4RouteMapSetTag | read-write | current | To specify the tag for BGP routes. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.14 | ColumnsnBgp4RouteMapSetWeight | read-write | current | To specify the BGP weight for the routing table. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.15 | ColumnsnBgp4RouteMapSetRowMask | read-write | current | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEnt… |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.16 | ColumnsnBgp4RouteMapSetCommunityNums | read-write | current | Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.17 | ColumnsnBgp4RouteMapSetDampenHalfLife | read-write | current | Bgp4 Route Map Dampening Half Life. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.18 | ColumnsnBgp4RouteMapSetDampenReuse | read-write | current | Bgp4 Route Map Dampening Reuse. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.19 | ColumnsnBgp4RouteMapSetDampenSuppress | read-write | current | Bgp4 Route Map Dampening Suppress. |
| 1.3.6.1.4.1.1991.1.2.11.14.1.1.20 | ColumnsnBgp4RouteMapSetDampenMaxSuppress | read-write | current | Bgp4 Route Map Dampening Max Suppress Time. |
| 1.3.6.1.4.1.1991.1.2.11.15 | NodesnBgp4NeighOperStatus | |||
| 1.3.6.1.4.1.1991.1.2.11.15.1 | TablesnBgp4NeighOperStatusTable | not-accessible | current | Bgp4 Neighbor Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1 | RowsnBgp4NeighOperStatusEntry | not-accessible | current | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.1 | ColumnsnBgp4NeighOperStatusIndex | read-only | current | The index for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.2 | ColumnsnBgp4NeighOperStatusIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.3 | ColumnsnBgp4NeighOperStatusRemoteAs | read-only | current | To show a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.4 | ColumnsnBgp4NeighOperStatusBgpType | read-only | current | To show the type of BGP protocol whether is internal or external. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.5 | ColumnsnBgp4NeighOperStatusState | read-only | current | To show the state of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.6 | ColumnsnBgp4NeighOperStatusKeepAliveTime | read-only | current | The Keep alive timer. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.7 | ColumnsnBgp4NeighOperStatusHoldTime | read-only | current | The Hold time timer. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.8 | ColumnsnBgp4NeighOperStatusAdvertlevel | read-only | current | To show the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.9 | ColumnsnBgp4NeighOperStatusKeepAliveTxCounts | read-only | current | Keep alive message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.10 | ColumnsnBgp4NeighOperStatusKeepAliveRxCounts | read-only | current | Keep alive message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.11 | ColumnsnBgp4NeighOperStatusUpdateTxCounts | read-only | current | Update message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.12 | ColumnsnBgp4NeighOperStatusUpdateRxCounts | read-only | current | Update message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.13 | ColumnsnBgp4NeighOperStatusNotifTxCounts | read-only | current | Notification message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.14 | ColumnsnBgp4NeighOperStatusNotifRxCounts | read-only | current | Notification message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.15 | ColumnsnBgp4NeighOperStatusOpenTxCounts | read-only | current | Open message sent counts. |
| 1.3.6.1.4.1.1991.1.2.11.15.1.1.16 | ColumnsnBgp4NeighOperStatusOpenRxCounts | read-only | current | Open message received counts. |
| 1.3.6.1.4.1.1991.1.2.11.16 | NodesnBgp4RouteOperStatus | |||
| 1.3.6.1.4.1.1991.1.2.11.16.1 | TablesnBgp4RouteOperStatusTable | not-accessible | current | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1 | RowsnBgp4RouteOperStatusEntry | not-accessible | current | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.1 | ColumnsnBgp4RouteOperStatusIndex | read-only | current | The index for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.2 | ColumnsnBgp4RouteOperStatusIp | read-only | current | The IP Address for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.3 | ColumnsnBgp4RouteOperStatusSubnetMask | read-only | current | The IP Subnet Mask for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.4 | ColumnsnBgp4RouteOperStatusNextHop | read-only | current | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.5 | ColumnsnBgp4RouteOperStatusMetric | read-only | current | To show the metric value of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.6 | ColumnsnBgp4RouteOperStatusLocalPreference | read-only | current | To show the local preference of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.7 | ColumnsnBgp4RouteOperStatusWeight | read-only | current | To show the weight of this route. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.8 | ColumnsnBgp4RouteOperStatusOrigin | read-only | current | To show the origin of this route. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.9 | ColumnsnBgp4RouteOperStatusStatus | read-only | current | A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant b… |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.10 | ColumnsnBgp4RouteOperStatusRouteTag | read-only | current | To show the route tag of this route. |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.11 | ColumnsnBgp4RouteOperStatusCommunityList | read-only | current | To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to … |
| 1.3.6.1.4.1.1991.1.2.11.16.1.1.12 | ColumnsnBgp4RouteOperStatusAsPathList | read-only | current | To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.17 | NodesnBgp4NeighborSummary | |||
| 1.3.6.1.4.1.1991.1.2.11.17.1 | TablesnBgp4NeighborSummaryTable | not-accessible | current | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1 | RowsnBgp4NeighborSummaryEntry | not-accessible | current | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.1 | ColumnsnBgp4NeighborSummaryIndex | read-only | current | The index for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.2 | ColumnsnBgp4NeighborSummaryIp | read-only | current | The IP Address for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.3 | ColumnsnBgp4NeighborSummaryState | read-only | current | To show the state of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.4 | ColumnsnBgp4NeighborSummaryStateChgTime | read-only | current | The time of a change of the state of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.5 | ColumnsnBgp4NeighborSummaryRouteReceived | read-only | current | The number of routes received of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.17.1.1.6 | ColumnsnBgp4NeighborSummaryRouteInstalled | read-only | current | The number of routes installed of this neighbor. |
| 1.3.6.1.4.1.1991.1.2.11.18 | NodesnBgp4Attribute | |||
| 1.3.6.1.4.1.1991.1.2.11.18.1 | TablesnBgp4AttributeTable | not-accessible | current | Bgp4 Attribute entries table. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1 | RowsnBgp4AttributeEntry | not-accessible | current | An entry in the Bgp4 Attribute table. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.1 | ColumnsnBgp4AttributeIndex | read-only | current | The index for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.2 | ColumnsnBgp4AttributeNextHop | read-only | current | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.3 | ColumnsnBgp4AttributeMetric | read-only | current | To show the metric value of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.4 | ColumnsnBgp4AttributeOrigin | read-only | current | To show the origin of this route. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.5 | ColumnsnBgp4AttributeAggregatorAs | read-only | current | The aggregator AS number for an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.6 | ColumnsnBgp4AttributeRouterId | read-only | current | The router ID for an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.7 | ColumnsnBgp4AttributeAtomicAggregatePresent | read-only | current | The atomic aggregate present in an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.8 | ColumnsnBgp4AttributeLocalPreference | read-only | current | To show the local preference of a route entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.9 | ColumnsnBgp4AttributeCommunityList | read-only | current | To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number … |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.10 | ColumnsnBgp4AttributeAsPathList | read-only | current | To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.11 | ColumnsnBgp4AttributeOriginator | read-only | current | The originator IP address for an attribute entry. |
| 1.3.6.1.4.1.1991.1.2.11.18.1.1.12 | ColumnsnBgp4AttributeClusterList | read-only | current | To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID w… |
| 1.3.6.1.4.1.1991.1.2.11.19 | NodesnBgp4ClearNeighborCmd | |||
| 1.3.6.1.4.1.1991.1.2.11.19.1 | TablesnBgp4ClearNeighborCmdTable | not-accessible | current | Clear Bgp4 command table. |
| 1.3.6.1.4.1.1991.1.2.11.19.1.1 | RowsnBgp4ClearNeighborCmdEntry | not-accessible | current | An entry in the clear Bgp4 neighbor command table. |
| 1.3.6.1.4.1.1991.1.2.11.19.1.1.1 | ColumnsnBgp4ClearNeighborCmdIp | read-only | current | The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. |
| 1.3.6.1.4.1.1991.1.2.11.19.1.1.2 | ColumnsnBgp4ClearNeighborCmdElement | read-write | current | To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get. |
| 1.3.6.1.4.1.1991.1.2.11.20 | NodesnBgp4NeighPrefixGroup | |||
| 1.3.6.1.4.1.1991.1.2.11.20.1 | TablesnBgp4NeighPrefixGroupTable | not-accessible | current | Bgp4 Neighbor Prefix Group table. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1 | RowsnBgp4NeighPrefixGroupEntry | not-accessible | current | An entry in the Bgp4 Prefix Group table. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.1 | ColumnsnBgp4NeighPrefixGroupNeighIp | read-only | current | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.2 | ColumnsnBgp4NeighPrefixGroupDir | read-only | current | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.3 | ColumnsnBgp4NeighPrefixGroupInAccessList | read-write | current | An in access prefix list name. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.4 | ColumnsnBgp4NeighPrefixGroupOutAccessList | read-write | current | An out prefix list name. |
| 1.3.6.1.4.1.1991.1.2.11.20.1.1.5 | ColumnsnBgp4NeighPrefixGroupRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.11.21 | NodesnBgpNbrStats | |||
| 1.3.6.1.4.1.1991.1.2.11.21.1 | TablesnBgpNbrStatsEntryTable | not-accessible | current | BGPv4/v6 neighbor statistics table. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1 | RowsnBgpNbrStatsEntry | not-accessible | current | An entry in the BGP neighbor statistics table. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.1 | ColumnsnBgpStatsVrfNameLength | not-accessible | current | VRF name length. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.2 | ColumnsnBgpStatsVrfName | not-accessible | current | VRF name. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.3 | ColumnsnBgpStatsAfi | not-accessible | current | Address family identifier: ipv4(1) or ipv6(2). |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.4 | ColumnsnBgpStatsSafi | not-accessible | current | Subsequent address family identifier. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.5 | ColumnsnBgpNbrStatsConfiguredCount | read-only | current | Total number of configured BGP neighbors for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.6 | ColumnsnBgpNbrStatsIdleCount | read-only | current | Total number of BGP neighbors in the idle state for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.7 | ColumnsnBgpNbrStatsConnectCount | read-only | current | Total number of BGP neighbors in the connect state for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.8 | ColumnsnBgpNbrStatsActiveCount | read-only | current | Total number of BGP neighbors in the active state for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.9 | ColumnsnBgpNbrStatsOpenSentCount | read-only | current | Total number of BGP neighbors in the open-sent state for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.10 | ColumnsnBgpNbrStatsOpenConfirmCount | read-only | current | Total number of BGP neighbors in the open-confirm state for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.11 | ColumnsnBgpNbrStatsEstablishedCount | read-only | current | Total number of BGP neighbors in the established state for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.12 | ColumnsnBgpNbrStatsReceivedPrefixCount | read-only | current | Total number of installed prefixes learned from BGP neighbors for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.11.21.1.1.13 | ColumnsnBgpNbrStatsAdvertisedPrefixCount | read-only | current | Total number of prefixes advertised by BGP for a VRF and AFI. |
| 1.3.6.1.4.1.1991.1.2.12 | IdentitysnVrrp | Copyright 1996-2017 Ruckus Wireless, Inc.. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wirele… | ||
| 1.3.6.1.4.1.1991.1.2.12.1 | NodesnVrrpGlobal | |||
| 1.3.6.1.4.1.1991.1.2.12.1.1 | ScalarsnVrrpGroupOperMode | read-write | current | The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activ… |
| 1.3.6.1.4.1.1991.1.2.12.1.2 | ScalarsnVrrpIfStateChangeTrap | read-write | current | Indicates whether the SNMP agent process is permitted to generate vrrp and vrrpe interface state change traps. |
| 1.3.6.1.4.1.1991.1.2.12.1.3 | ScalarsnVrrpIfMaxNumVridPerIntf | read-only | current | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.1991.1.2.12.1.4 | ScalarsnVrrpIfMaxNumVridPerSystem | read-only | current | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.1991.1.2.12.1.5 | ScalarsnVrrpClearVrrpStat | read-write | current | Clear VRRP statistics command. |
| 1.3.6.1.4.1.1991.1.2.12.1.6 | ScalarsnVrrpGroupOperModeVrrpextended | read-write | current | The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(… |
| 1.3.6.1.4.1.1991.1.2.12.2 | NodesnVrrpIntf | |||
| 1.3.6.1.4.1.1991.1.2.12.2.1 | TablesnVrrpIfTable | not-accessible | deprecated | The VRRP Interface Table describes the interfaces from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1 | RowsnVrrpIfEntry | not-accessible | deprecated | The VRRP Interface Entry describes one interface from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.1 | ColumnsnVrrpIfPort | read-only | deprecated | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.2 | ColumnsnVrrpIfAuthType | read-write | deprecated | The authentication type of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.3 | ColumnsnVrrpIfAuthPassword | read-write | deprecated | The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1). |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.4 | ColumnsnVrrpIfRxHeaderErrCnts | read-only | deprecated | The received Header error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.5 | ColumnsnVrrpIfRxAuthTypeErrCnts | read-only | deprecated | The received authentication type error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.6 | ColumnsnVrrpIfRxAuthPwdMismatchErrCnts | read-only | deprecated | The received authentication password mismatched error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.2.1.1.7 | ColumnsnVrrpIfRxVridErrCnts | read-only | deprecated | The received unfound VRID error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.3 | NodesnVrrpVirRtr | |||
| 1.3.6.1.4.1.1991.1.2.12.3.1 | TablesnVrrpVirRtrTable | not-accessible | deprecated | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1 | RowsnVrrpVirRtrEntry | not-accessible | deprecated | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.1 | ColumnsnVrrpVirRtrPort | read-only | deprecated | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.2 | ColumnsnVrrpVirRtrId | read-only | deprecated | One of the virtual router ID of this VRRP interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.3 | ColumnsnVrrpVirRtrOwnership | read-write | deprecated | The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.4 | ColumnsnVrrpVirRtrCfgPriority | read-write | deprecated | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.5 | ColumnsnVrrpVirRtrTrackPriority | read-write | deprecated | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.6 | ColumnsnVrrpVirRtrCurrPriority | read-only | deprecated | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.7 | ColumnsnVrrpVirRtrHelloInt | read-write | deprecated | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.8 | ColumnsnVrrpVirRtrDeadInt | read-write | deprecated | Dead interval (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.9 | ColumnsnVrrpVirRtrPreemptMode | read-write | deprecated | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.10 | ColumnsnVrrpVirRtrState | read-only | deprecated | This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.11 | ColumnsnVrrpVirRtrActivate | read-write | deprecated | This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.12 | ColumnsnVrrpVirRtrIpAddrMask | read-write | deprecated | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.13 | ColumnsnVrrpVirRtrTrackPortMask | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this objec… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.14 | ColumnsnVrrpVirRtrTrackVifMask | read-write | deprecated | This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this o… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.15 | ColumnsnVrrpVirRtrRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.16 | ColumnsnVrrpVirRtrRxArpPktDropCnts | read-only | deprecated | The received VRRP ARP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.17 | ColumnsnVrrpVirRtrRxIpPktDropCnts | read-only | deprecated | The received VRRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.18 | ColumnsnVrrpVirRtrRxPortMismatchCnts | read-only | deprecated | The received VRRP Port mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.19 | ColumnsnVrrpVirRtrRxNumOfIpMismatchCnts | read-only | deprecated | The received VRRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.20 | ColumnsnVrrpVirRtrRxIpMismatchCnts | read-only | deprecated | The received VRRP IP Address mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.21 | ColumnsnVrrpVirRtrRxHelloIntMismatchCnts | read-only | deprecated | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.22 | ColumnsnVrrpVirRtrRxPriorityZeroFromMasterCnts | read-only | deprecated | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.23 | ColumnsnVrrpVirRtrRxHigherPriorityCnts | read-only | deprecated | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.24 | ColumnsnVrrpVirRtrTransToMasterStateCnts | read-only | deprecated | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.25 | ColumnsnVrrpVirRtrTransToBackupStateCnts | read-only | deprecated | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.26 | ColumnsnVrrpVirRtrCurrDeadInt | read-only | deprecated | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.27 | ColumnsnVrrpVirRtrTrackPortList | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the s… |
| 1.3.6.1.4.1.1991.1.2.12.3.1.1.28 | ColumnsnVrrpVirRtrTrackVifPortList | read-write | deprecated | This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default va… |
| 1.3.6.1.4.1.1991.1.2.12.4 | NodesnVrrpIntf2 | |||
| 1.3.6.1.4.1.1991.1.2.12.4.1 | TablesnVrrpIf2Table | not-accessible | current | The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1 | RowsnVrrpIf2Entry | not-accessible | current | The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.1 | ColumnsnVrrpIf2AuthType | read-write | current | The authentication type of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.2 | ColumnsnVrrpIf2AuthPassword | read-write | current | The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1). |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.3 | ColumnsnVrrpIf2RxHeaderErrCnts | read-only | current | The received Header error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.4 | ColumnsnVrrpIf2RxAuthTypeErrCnts | read-only | current | The received authentication type error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.5 | ColumnsnVrrpIf2RxAuthPwdMismatchErrCnts | read-only | current | The received authentication password mismatched error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.4.1.1.6 | ColumnsnVrrpIf2RxVridErrCnts | read-only | current | The received unfound VRID error counts in this interface. |
| 1.3.6.1.4.1.1991.1.2.12.5 | NodesnVrrpVirRtr2 | |||
| 1.3.6.1.4.1.1991.1.2.12.5.1 | TablesnVrrpVirRtr2Table | not-accessible | current | The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1 | RowsnVrrpVirRtr2Entry | not-accessible | current | The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.1 | ColumnsnVrrpVirRtr2Id | read-only | current | One of the virtual router ID of this Vrrp and Vrrpe interface. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.2 | ColumnsnVrrpVirRtr2Ownership | read-write | current | The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.3 | ColumnsnVrrpVirRtr2CfgPriority | read-write | current | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although … |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.4 | ColumnsnVrrpVirRtr2TrackPriority | read-write | current | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.5 | ColumnsnVrrpVirRtr2CurrPriority | read-only | current | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.6 | ColumnsnVrrpVirRtr2HelloInt | read-write | current | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.7 | ColumnsnVrrpVirRtr2DeadInt | read-write | current | Dead interval (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.8 | ColumnsnVrrpVirRtr2PreemptMode | read-write | current | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.9 | ColumnsnVrrpVirRtr2State | read-only | current | This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.10 | ColumnsnVrrpVirRtr2IpAddrMask | read-write | current | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.11 | ColumnsnVrrpVirRtr2Activate | read-write | current | This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe R… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.12 | ColumnsnVrrpVirRtr2BackupInt | read-write | current | Time interval between backup routers hello message advertisements (seconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.13 | ColumnsnVrrpVirRtr2RowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.14 | ColumnsnVrrpVirRtr2RxArpPktDropCnts | read-only | current | The received Vrrp and Vrrpe ARP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.15 | ColumnsnVrrpVirRtr2RxIpPktDropCnts | read-only | current | The received Vrrp and Vrrpe IP Packet Drop Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.16 | ColumnsnVrrpVirRtr2RxPortMismatchCnts | read-only | current | The received Vrrp and Vrrpe Port mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.17 | ColumnsnVrrpVirRtr2RxNumOfIpMismatchCnts | read-only | current | The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.18 | ColumnsnVrrpVirRtr2RxIpMismatchCnts | read-only | current | The received Vrrp and Vrrpe IP Address mismatching Counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.19 | ColumnsnVrrpVirRtr2RxHelloIntMismatchCnts | read-only | current | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.20 | ColumnsnVrrpVirRtr2RxPriorityZeroFromMasterCnts | read-only | current | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.21 | ColumnsnVrrpVirRtr2RxHigherPriorityCnts | read-only | current | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.22 | ColumnsnVrrpVirRtr2TransToMasterStateCnts | read-only | current | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.23 | ColumnsnVrrpVirRtr2TransToBackupStateCnts | read-only | current | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.24 | ColumnsnVrrpVirRtr2CurrDeadInt | read-only | current | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.25 | ColumnsnVrrpVirRtr2TrackPortList | read-write | current | This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecuti… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.26 | ColumnsnVrrpVirRtr2AdvertiseBackup | read-write | current | Set Advertise this backup router to master |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.27 | ColumnsnVrrpVirRtr2MasterIpAddr | read-only | current | The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtua… |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.28 | ColumnsnVrrpVirRtr2IpAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond … |
| 1.3.6.1.4.1.1991.1.2.12.5.1.1.29 | ColumnsnVrrpVirRtr2VirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obta… |
| 1.3.6.1.4.1.1991.1.2.13 | NodesnLoopbackIf | |||
| 1.3.6.1.4.1.1991.1.2.13.1 | TablesnLoopbackIntfConfigTable | not-accessible | current | Loopback Interface Config table. |
| 1.3.6.1.4.1.1991.1.2.13.1.1 | RowsnLoopbackIntfConfigEntry | not-accessible | current | An entry in the Loopback Interface Config table. |
| 1.3.6.1.4.1.1991.1.2.13.1.1.1 | ColumnsnLoopbackIntfConfigPortIndex | read-only | current | The port index for Loopback Interface config entry. |
| 1.3.6.1.4.1.1991.1.2.13.1.1.2 | ColumnsnLoopbackIntfMode | read-write | current | The Loopback Interface mode. |
| 1.3.6.1.4.1.1991.1.2.13.1.1.3 | ColumnsnLoopbackIntfRowStatus | read-write | current | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.1991.1.2.14 | NodesnPOS | |||
| 1.3.6.1.4.1.1991.1.2.15 | NodesnMpls | |||
| 1.3.6.1.4.1.1991.1.2.16 | NodefdryAcl | |||
| 1.3.6.1.4.1.1991.1.2.17 | NodefdryIpv6 | |||
| 1.3.6.1.4.1.1991.1.2.17.1 | IdentityfdryIpv6MIB | The Ruckus Wireless proprietary MIB module for IPv6. Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management I… | ||
| 1.3.6.1.4.1.1991.1.2.17.1.1 | NodefdryIpv6GlobalObjects | |||
| 1.3.6.1.4.1.1991.1.2.17.1.1.1 | ScalarfdryIpv6LoadShare | read-write | current | If more than one ipv6 route available, use them to share load. |
| 1.3.6.1.4.1.1991.1.2.17.1.1.2 | ScalarfdryIpv6LoadShareNumOfPaths | read-write | current | Number of ipv6 routes are used to share load. |
| 1.3.6.1.4.1.1991.1.3 | Noderegistration | |||
| 1.3.6.1.4.1.1991.1.3.1 | NodesnFastIron | |||
| 1.3.6.1.4.1.1991.1.3.1.1 | NodesnFIWGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.1.2 | NodesnFIBBSwitch | |||
| 1.3.6.1.4.1.1991.1.3.2 | NodesnNetIron | |||
| 1.3.6.1.4.1.1991.1.3.2.1 | NodesnNIRouter | |||
| 1.3.6.1.4.1.1991.1.3.3 | NodesnServerIron | |||
| 1.3.6.1.4.1.1991.1.3.3.1 | NodesnSI | |||
| 1.3.6.1.4.1.1991.1.3.3.2 | NodesnSIXL | |||
| 1.3.6.1.4.1.1991.1.3.3.3 | NodesnSIXLTCS | |||
| 1.3.6.1.4.1.1991.1.3.4 | NodesnTurboIron | |||
| 1.3.6.1.4.1.1991.1.3.4.1 | NodesnTISwitch | |||
| 1.3.6.1.4.1.1991.1.3.4.2 | NodesnTIRouter | |||
| 1.3.6.1.4.1.1991.1.3.5 | NodesnTurboIron8 | |||
| 1.3.6.1.4.1.1991.1.3.5.1 | NodesnT8Switch | |||
| 1.3.6.1.4.1.1991.1.3.5.2 | NodesnT8Router | |||
| 1.3.6.1.4.1.1991.1.3.5.3 | NodesnT8SI | |||
| 1.3.6.1.4.1.1991.1.3.5.4 | NodesnT8SIXLG | |||
| 1.3.6.1.4.1.1991.1.3.6 | NodesnBigIron4000 | |||
| 1.3.6.1.4.1.1991.1.3.6.1 | NodesnBI4000Switch | |||
| 1.3.6.1.4.1.1991.1.3.6.2 | NodesnBI4000Router | |||
| 1.3.6.1.4.1.1991.1.3.6.3 | NodesnBI4000SI | |||
| 1.3.6.1.4.1.1991.1.3.7 | NodesnBigIron8000 | |||
| 1.3.6.1.4.1.1991.1.3.7.1 | NodesnBI8000Switch | |||
| 1.3.6.1.4.1.1991.1.3.7.2 | NodesnBI8000Router | |||
| 1.3.6.1.4.1.1991.1.3.7.3 | NodesnBI8000SI | |||
| 1.3.6.1.4.1.1991.1.3.8 | NodesnFastIron2 | |||
| 1.3.6.1.4.1.1991.1.3.8.1 | NodesnFI2Switch | |||
| 1.3.6.1.4.1.1991.1.3.8.2 | NodesnFI2Router | |||
| 1.3.6.1.4.1.1991.1.3.9 | NodesnFastIron2Plus | |||
| 1.3.6.1.4.1.1991.1.3.9.1 | NodesnFI2PlusSwitch | |||
| 1.3.6.1.4.1.1991.1.3.9.2 | NodesnFI2PlusRouter | |||
| 1.3.6.1.4.1.1991.1.3.10 | NodesnNetIron400 | |||
| 1.3.6.1.4.1.1991.1.3.10.1 | NodesnNI400Router | |||
| 1.3.6.1.4.1.1991.1.3.11 | NodesnNetIron800 | |||
| 1.3.6.1.4.1.1991.1.3.11.1 | NodesnNI800Router | |||
| 1.3.6.1.4.1.1991.1.3.12 | NodesnFastIron2GC | |||
| 1.3.6.1.4.1.1991.1.3.12.1 | NodesnFI2GCSwitch | |||
| 1.3.6.1.4.1.1991.1.3.12.2 | NodesnFI2GCRouter | |||
| 1.3.6.1.4.1.1991.1.3.13 | NodesnFastIron2PlusGC | |||
| 1.3.6.1.4.1.1991.1.3.13.1 | NodesnFI2PlusGCSwitch | |||
| 1.3.6.1.4.1.1991.1.3.13.2 | NodesnFI2PlusGCRouter | |||
| 1.3.6.1.4.1.1991.1.3.14 | NodesnBigIron15000 | |||
| 1.3.6.1.4.1.1991.1.3.14.1 | NodesnBI15000Switch | |||
| 1.3.6.1.4.1.1991.1.3.14.2 | NodesnBI15000Router | |||
| 1.3.6.1.4.1.1991.1.3.14.3 | NodesnBI15000SI | |||
| 1.3.6.1.4.1.1991.1.3.15 | NodesnNetIron1500 | |||
| 1.3.6.1.4.1.1991.1.3.15.1 | NodesnNI1500Router | |||
| 1.3.6.1.4.1.1991.1.3.16 | NodesnFastIron3 | |||
| 1.3.6.1.4.1.1991.1.3.16.1 | NodesnFI3Switch | |||
| 1.3.6.1.4.1.1991.1.3.16.2 | NodesnFI3Router | |||
| 1.3.6.1.4.1.1991.1.3.17 | NodesnFastIron3GC | |||
| 1.3.6.1.4.1.1991.1.3.17.1 | NodesnFI3GCSwitch | |||
| 1.3.6.1.4.1.1991.1.3.17.2 | NodesnFI3GCRouter | |||
| 1.3.6.1.4.1.1991.1.3.18 | NodesnServerIron400 | |||
| 1.3.6.1.4.1.1991.1.3.18.1 | NodesnSI400Switch | |||
| 1.3.6.1.4.1.1991.1.3.18.2 | NodesnSI400Router | |||
| 1.3.6.1.4.1.1991.1.3.19 | NodesnServerIron800 | |||
| 1.3.6.1.4.1.1991.1.3.19.1 | NodesnSI800Switch | |||
| 1.3.6.1.4.1.1991.1.3.19.2 | NodesnSI800Router | |||
| 1.3.6.1.4.1.1991.1.3.20 | NodesnServerIron1500 | |||
| 1.3.6.1.4.1.1991.1.3.20.1 | NodesnSI1500Switch | |||
| 1.3.6.1.4.1.1991.1.3.20.2 | NodesnSI1500Router | |||
| 1.3.6.1.4.1.1991.1.3.21 | Nodesn4802 | |||
| 1.3.6.1.4.1.1991.1.3.21.1 | Nodesn4802Switch | |||
| 1.3.6.1.4.1.1991.1.3.21.2 | Nodesn4802Router | |||
| 1.3.6.1.4.1.1991.1.3.21.3 | Nodesn4802SI | |||
| 1.3.6.1.4.1.1991.1.3.22 | NodesnFastIron400 | |||
| 1.3.6.1.4.1.1991.1.3.22.1 | NodesnFI400Switch | |||
| 1.3.6.1.4.1.1991.1.3.22.2 | NodesnFI400Router | |||
| 1.3.6.1.4.1.1991.1.3.23 | NodesnFastIron800 | |||
| 1.3.6.1.4.1.1991.1.3.23.1 | NodesnFI800Switch | |||
| 1.3.6.1.4.1.1991.1.3.23.2 | NodesnFI800Router | |||
| 1.3.6.1.4.1.1991.1.3.24 | NodesnFastIron1500 | |||
| 1.3.6.1.4.1.1991.1.3.24.1 | NodesnFI1500Switch | |||
| 1.3.6.1.4.1.1991.1.3.24.2 | NodesnFI1500Router | |||
| 1.3.6.1.4.1.1991.1.3.25 | NodesnFES2402 | |||
| 1.3.6.1.4.1.1991.1.3.25.1 | NodesnFES2402Switch | |||
| 1.3.6.1.4.1.1991.1.3.25.2 | NodesnFES2402Router | |||
| 1.3.6.1.4.1.1991.1.3.26 | NodesnFES4802 | |||
| 1.3.6.1.4.1.1991.1.3.26.1 | NodesnFES4802Switch | |||
| 1.3.6.1.4.1.1991.1.3.26.2 | NodesnFES4802Router | |||
| 1.3.6.1.4.1.1991.1.3.27 | NodesnFES9604 | |||
| 1.3.6.1.4.1.1991.1.3.27.1 | NodesnFES9604Switch | |||
| 1.3.6.1.4.1.1991.1.3.27.2 | NodesnFES9604Router | |||
| 1.3.6.1.4.1.1991.1.3.28 | NodesnFES12GCF | |||
| 1.3.6.1.4.1.1991.1.3.28.1 | NodesnFES12GCFSwitch | |||
| 1.3.6.1.4.1.1991.1.3.28.2 | NodesnFES12GCFRouter | |||
| 1.3.6.1.4.1.1991.1.3.29 | NodesnFES2402POE | |||
| 1.3.6.1.4.1.1991.1.3.29.1 | NodesnFES2402POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.29.2 | NodesnFES2402POERouter | |||
| 1.3.6.1.4.1.1991.1.3.30 | NodesnFES4802POE | |||
| 1.3.6.1.4.1.1991.1.3.30.1 | NodesnFES4802POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.30.2 | NodesnFES4802POERouter | |||
| 1.3.6.1.4.1.1991.1.3.31 | NodesnNetIron4802 | |||
| 1.3.6.1.4.1.1991.1.3.31.1 | NodesnNI4802Switch | |||
| 1.3.6.1.4.1.1991.1.3.31.2 | NodesnNI4802Router | |||
| 1.3.6.1.4.1.1991.1.3.32 | NodesnBigIronMG8 | |||
| 1.3.6.1.4.1.1991.1.3.32.1 | NodesnBIMG8Switch | |||
| 1.3.6.1.4.1.1991.1.3.32.2 | NodesnBIMG8Router | |||
| 1.3.6.1.4.1.1991.1.3.33 | NodesnNetIron40G | |||
| 1.3.6.1.4.1.1991.1.3.33.2 | NodesnNI40GRouter | |||
| 1.3.6.1.4.1.1991.1.3.34 | NodesnFESXFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.1 | NodesnFESX424Family | |||
| 1.3.6.1.4.1.1991.1.3.34.1.1 | NodesnFESX424BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.1.1.1 | NodesnFESX424 | |||
| 1.3.6.1.4.1.1991.1.3.34.1.1.1.1 | NodesnFESX424Switch | |||
| 1.3.6.1.4.1.1991.1.3.34.1.1.1.2 | NodesnFESX424Router | |||
| 1.3.6.1.4.1.1991.1.3.34.1.1.2 | NodesnFESX424Prem | |||
| 1.3.6.1.4.1.1991.1.3.34.1.1.2.1 | NodesnFESX424PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.1.1.2.2 | NodesnFESX424PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.1.2 | NodesnFESX424Plus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.1.2.1 | NodesnFESX424Plus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.1.2.1.1 | NodesnFESX424Plus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.1.2.1.2 | NodesnFESX424Plus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.1.2.2 | NodesnFESX424Plus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.1.2.2.1 | NodesnFESX424Plus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.1.2.2.2 | NodesnFESX424Plus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.1.3 | NodesnFESX424Plus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.1.3.1 | NodesnFESX424Plus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.1.3.1.1 | NodesnFESX424Plus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.1.3.1.2 | NodesnFESX424Plus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.1.3.2 | NodesnFESX424Plus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.1.3.2.1 | NodesnFESX424Plus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.1.3.2.2 | NodesnFESX424Plus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.2 | NodesnFESX448Family | |||
| 1.3.6.1.4.1.1991.1.3.34.2.1 | NodesnFESX448BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.2.1.1 | NodesnFESX448 | |||
| 1.3.6.1.4.1.1991.1.3.34.2.1.1.1 | NodesnFESX448Switch | |||
| 1.3.6.1.4.1.1991.1.3.34.2.1.1.2 | NodesnFESX448Router | |||
| 1.3.6.1.4.1.1991.1.3.34.2.1.2 | NodesnFESX448Prem | |||
| 1.3.6.1.4.1.1991.1.3.34.2.1.2.1 | NodesnFESX448PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.2.1.2.2 | NodesnFESX448PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.2.2 | NodesnFESX448Plus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.2.2.1 | NodesnFESX448Plus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.2.2.1.1 | NodesnFESX448Plus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.2.2.1.2 | NodesnFESX448Plus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.2.2.2 | NodesnFESX448Plus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.2.2.2.1 | NodesnFESX448Plus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.2.2.2.2 | NodesnFESX448Plus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.2.3 | NodesnFESX448Plus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.2.3.1 | NodesnFESX448Plus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.2.3.1.1 | NodesnFESX448Plus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.2.3.1.2 | NodesnFESX448Plus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.2.3.2 | NodesnFESX448Plus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.2.3.2.1 | NodesnFESX448Plus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.2.3.2.2 | NodesnFESX448Plus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.3 | NodesnFESX424FiberFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.3.1 | NodesnFESX424FiberBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.3.1.1 | NodesnFESX424Fiber | |||
| 1.3.6.1.4.1.1991.1.3.34.3.1.1.1 | NodesnFESX424FiberSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.3.1.1.2 | NodesnFESX424FiberRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.3.1.2 | NodesnFESX424FiberPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.3.1.2.1 | NodesnFESX424FiberPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.3.1.2.2 | NodesnFESX424FiberPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.3.2 | NodesnFESX424FiberPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.3.2.1 | NodesnFESX424FiberPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.3.2.1.1 | NodesnFESX424FiberPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.3.2.1.2 | NodesnFESX424FiberPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.3.2.2 | NodesnFESX424FiberPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.3.2.2.1 | NodesnFESX424FiberPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.3.2.2.2 | NodesnFESX424FiberPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.3.3 | NodesnFESX424FiberPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.3.3.1 | NodesnFESX424FiberPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.3.3.1.1 | NodesnFESX424FiberPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.3.3.1.2 | NodesnFESX424FiberPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.3.3.2 | NodesnFESX424FiberPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.3.3.2.1 | NodesnFESX424FiberPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.3.3.2.2 | NodesnFESX424FiberPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.4 | NodesnFESX448FiberFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.4.1 | NodesnFESX448FiberBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.4.1.1 | NodesnFESX448Fiber | |||
| 1.3.6.1.4.1.1991.1.3.34.4.1.1.1 | NodesnFESX448FiberSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.4.1.1.2 | NodesnFESX448FiberRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.4.1.2 | NodesnFESX448FiberPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.4.1.2.1 | NodesnFESX448FiberPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.4.1.2.2 | NodesnFESX448FiberPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.4.2 | NodesnFESX448FiberPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.4.2.1 | NodesnFESX448FiberPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.4.2.1.1 | NodesnFESX448FiberPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.4.2.1.2 | NodesnFESX448FiberPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.4.2.2 | NodesnFESX448FiberPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.4.2.2.1 | NodesnFESX448FiberPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.4.2.2.2 | NodesnFESX448FiberPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.4.3 | NodesnFESX448FiberPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.4.3.1 | NodesnFESX448FiberPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.4.3.1.1 | NodesnFESX448FiberPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.4.3.1.2 | NodesnFESX448FiberPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.4.3.2 | NodesnFESX448FiberPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.4.3.2.1 | NodesnFESX448FiberPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.4.3.2.2 | NodesnFESX448FiberPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.5 | NodesnFESX424POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.5.1 | NodesnFESX424POEBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.5.1.1 | NodesnFESX424POE | |||
| 1.3.6.1.4.1.1991.1.3.34.5.1.1.1 | NodesnFESX424POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.5.1.1.2 | NodesnFESX424POERouter | |||
| 1.3.6.1.4.1.1991.1.3.34.5.1.2 | NodesnFESX424POEPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.5.1.2.1 | NodesnFESX424POEPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.5.1.2.2 | NodesnFESX424POEPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.5.2 | NodesnFESX424POEPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.5.2.1 | NodesnFESX424POEPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.5.2.1.1 | NodesnFESX424POEPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.5.2.1.2 | NodesnFESX424POEPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.5.2.2 | NodesnFESX424POEPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.5.2.2.1 | NodesnFESX424POEPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.5.2.2.2 | NodesnFESX424POEPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.5.3 | NodesnFESX424POEPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.5.3.1 | NodesnFESX424POEPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.5.3.1.1 | NodesnFESX424POEPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.5.3.1.2 | NodesnFESX424POEPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.5.3.2 | NodesnFESX424POEPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.5.3.2.1 | NodesnFESX424POEPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.5.3.2.2 | NodesnFESX424POEPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.6 | NodesnFESX624Family | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1 | NodesnFESX624BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1.1 | NodesnFESX624 | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1.1.1 | NodesnFESX624Switch | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1.1.2 | NodesnFESX624Router | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1.2 | NodesnFESX624Prem | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1.2.1 | NodesnFESX624PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1.2.2 | NodesnFESX624PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.6.1.2.3 | NodesnFESX624Prem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2 | NodesnFESX624Plus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2.1 | NodesnFESX624Plus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2.1.1 | NodesnFESX624Plus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2.1.2 | NodesnFESX624Plus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2.2 | NodesnFESX624Plus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2.2.1 | NodesnFESX624Plus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2.2.2 | NodesnFESX624Plus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.6.2.2.3 | NodesnFESX624Plus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3 | NodesnFESX624Plus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3.1 | NodesnFESX624Plus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3.1.1 | NodesnFESX624Plus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3.1.2 | NodesnFESX624Plus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3.2 | NodesnFESX624Plus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3.2.1 | NodesnFESX624Plus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3.2.2 | NodesnFESX624Plus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.6.3.2.3 | NodesnFESX624Plus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.7 | NodesnFESX648Family | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1 | NodesnFESX648BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1.1 | NodesnFESX648 | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1.1.1 | NodesnFESX648Switch | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1.1.2 | NodesnFESX648Router | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1.2 | NodesnFESX648Prem | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1.2.1 | NodesnFESX648PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1.2.2 | NodesnFESX648PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.7.1.2.3 | NodesnFESX648Prem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2 | NodesnFESX648Plus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2.1 | NodesnFESX648Plus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2.1.1 | NodesnFESX648Plus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2.1.2 | NodesnFESX648Plus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2.2 | NodesnFESX648Plus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2.2.1 | NodesnFESX648Plus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2.2.2 | NodesnFESX648Plus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.7.2.2.3 | NodesnFESX648Plus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3 | NodesnFESX648Plus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3.1 | NodesnFESX648Plus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3.1.1 | NodesnFESX648Plus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3.1.2 | NodesnFESX648Plus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3.2 | NodesnFESX648Plus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3.2.1 | NodesnFESX648Plus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3.2.2 | NodesnFESX648Plus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.7.3.2.3 | NodesnFESX648Plus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.8 | NodesnFESX624FiberFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1 | NodesnFESX624FiberBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1.1 | NodesnFESX624Fiber | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1.1.1 | NodesnFESX624FiberSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1.1.2 | NodesnFESX624FiberRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1.2 | NodesnFESX624FiberPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1.2.1 | NodesnFESX624FiberPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1.2.2 | NodesnFESX624FiberPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.8.1.2.3 | NodesnFESX624FiberPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2 | NodesnFESX624FiberPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2.1 | NodesnFESX624FiberPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2.1.1 | NodesnFESX624FiberPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2.1.2 | NodesnFESX624FiberPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2.2 | NodesnFESX624FiberPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2.2.1 | NodesnFESX624FiberPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2.2.2 | NodesnFESX624FiberPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.8.2.2.3 | NodesnFESX624FiberPlus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3 | NodesnFESX624FiberPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3.1 | NodesnFESX624FiberPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3.1.1 | NodesnFESX624FiberPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3.1.2 | NodesnFESX624FiberPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3.2 | NodesnFESX624FiberPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3.2.1 | NodesnFESX624FiberPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3.2.2 | NodesnFESX624FiberPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.8.3.2.3 | NodesnFESX624FiberPlus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.9 | NodesnFESX648FiberFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1 | NodesnFESX648FiberBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1.1 | NodesnFESX648Fiber | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1.1.1 | NodesnFESX648FiberSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1.1.2 | NodesnFESX648FiberRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1.2 | NodesnFESX648FiberPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1.2.1 | NodesnFESX648FiberPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1.2.2 | NodesnFESX648FiberPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.9.1.2.3 | NodesnFESX648FiberPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2 | NodesnFESX648FiberPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2.1 | NodesnFESX648FiberPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2.1.1 | NodesnFESX648FiberPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2.1.2 | NodesnFESX648FiberPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2.2 | NodesnFESX648FiberPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2.2.1 | NodesnFESX648FiberPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2.2.2 | NodesnFESX648FiberPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.9.2.2.3 | NodesnFESX648FiberPlus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3 | NodesnFESX648FiberPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3.1 | NodesnFESX648FiberPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3.1.1 | NodesnFESX648FiberPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3.1.2 | NodesnFESX648FiberPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3.2 | NodesnFESX648FiberPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3.2.1 | NodesnFESX648FiberPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3.2.2 | NodesnFESX648FiberPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.9.3.2.3 | NodesnFESX648FiberPlus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.10 | NodesnFESX624POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1 | NodesnFESX624POEBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1.1 | NodesnFESX624POE | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1.1.1 | NodesnFESX624POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1.1.2 | NodesnFESX624POERouter | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1.2 | NodesnFESX624POEPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1.2.1 | NodesnFESX624POEPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1.2.2 | NodesnFESX624POEPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.10.1.2.3 | NodesnFESX624POEPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2 | NodesnFESX624POEPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2.1 | NodesnFESX624POEPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2.1.1 | NodesnFESX624POEPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2.1.2 | NodesnFESX624POEPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2.2 | NodesnFESX624POEPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2.2.1 | NodesnFESX624POEPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2.2.2 | NodesnFESX624POEPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.10.2.2.3 | NodesnFESX624POEPlus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3 | NodesnFESX624POEPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3.1 | NodesnFESX624POEPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3.1.1 | NodesnFESX624POEPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3.1.2 | NodesnFESX624POEPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3.2 | NodesnFESX624POEPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3.2.1 | NodesnFESX624POEPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3.2.2 | NodesnFESX624POEPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.10.3.2.3 | NodesnFESX624POEPlus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.11 | NodesnFESX624EFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1 | NodesnFESX624EBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1.1 | NodesnFESX624E | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1.1.1 | NodesnFESX624ESwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1.1.2 | NodesnFESX624ERouter | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1.2 | NodesnFESX624EPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1.2.1 | NodesnFESX624EPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1.2.2 | NodesnFESX624EPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.11.1.2.3 | NodesnFESX624EPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2 | NodesnFESX624EPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2.1 | NodesnFESX624EPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2.1.1 | NodesnFESX624EPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2.1.2 | NodesnFESX624EPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2.2 | NodesnFESX624EPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2.2.1 | NodesnFESX624EPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2.2.2 | NodesnFESX624EPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.11.2.2.3 | NodesnFESX624EPlus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3 | NodesnFESX624EPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3.1 | NodesnFESX624EPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3.1.1 | NodesnFESX624EPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3.1.2 | NodesnFESX624EPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3.2 | NodesnFESX624EPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3.2.1 | NodesnFESX624EPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3.2.2 | NodesnFESX624EPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.11.3.2.3 | NodesnFESX624EPlus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.12 | NodesnFESX624EFiberFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1 | NodesnFESX624EFiberBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1.1 | NodesnFESX624EFiber | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1.1.1 | NodesnFESX624EFiberSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1.1.2 | NodesnFESX624EFiberRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1.2 | NodesnFESX624EFiberPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1.2.1 | NodesnFESX624EFiberPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1.2.2 | NodesnFESX624EFiberPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.12.1.2.3 | NodesnFESX624EFiberPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2 | NodesnFESX624EFiberPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2.1 | NodesnFESX624EFiberPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2.1.1 | NodesnFESX624EFiberPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2.1.2 | NodesnFESX624EFiberPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2.2 | NodesnFESX624EFiberPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2.2.1 | NodesnFESX624EFiberPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2.2.2 | NodesnFESX624EFiberPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.12.2.2.3 | NodesnFESX624EFiberPlus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3 | NodesnFESX624EFiberPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3.1 | NodesnFESX624EFiberPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3.1.1 | NodesnFESX624EFiberPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3.1.2 | NodesnFESX624EFiberPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3.2 | NodesnFESX624EFiberPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3.2.1 | NodesnFESX624EFiberPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3.2.2 | NodesnFESX624EFiberPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.12.3.2.3 | NodesnFESX624EFiberPlus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.13 | NodesnFESX648EFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1 | NodesnFESX648EBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1.1 | NodesnFESX648E | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1.1.1 | NodesnFESX648ESwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1.1.2 | NodesnFESX648ERouter | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1.2 | NodesnFESX648EPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1.2.1 | NodesnFESX648EPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1.2.2 | NodesnFESX648EPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.13.1.2.3 | NodesnFESX648EPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2 | NodesnFESX648EPlus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2.1 | NodesnFESX648EPlus1XG | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2.1.1 | NodesnFESX648EPlus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2.1.2 | NodesnFESX648EPlus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2.2 | NodesnFESX648EPlus1XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2.2.1 | NodesnFESX648EPlus1XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2.2.2 | NodesnFESX648EPlus1XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.13.2.2.3 | NodesnFESX648EPlus1XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3 | NodesnFESX648EPlus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3.1 | NodesnFESX648EPlus2XG | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3.1.1 | NodesnFESX648EPlus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3.1.2 | NodesnFESX648EPlus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3.2 | NodesnFESX648EPlus2XGPrem | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3.2.1 | NodesnFESX648EPlus2XGPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3.2.2 | NodesnFESX648EPlus2XGPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.34.13.3.2.3 | NodesnFESX648EPlus2XGPrem6Router | |||
| 1.3.6.1.4.1.1991.1.3.35 | NodesnFWSXFamily | |||
| 1.3.6.1.4.1.1991.1.3.35.1 | NodesnFWSX424Family | |||
| 1.3.6.1.4.1.1991.1.3.35.1.1 | NodesnFWSX424BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.35.1.1.1 | NodesnFWSX424 | |||
| 1.3.6.1.4.1.1991.1.3.35.1.1.1.1 | NodesnFWSX424Switch | |||
| 1.3.6.1.4.1.1991.1.3.35.1.1.1.2 | NodesnFWSX424Router | |||
| 1.3.6.1.4.1.1991.1.3.35.1.2 | NodesnFWSX424Plus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.35.1.2.1 | NodesnFWSX424Plus1XG | |||
| 1.3.6.1.4.1.1991.1.3.35.1.2.1.1 | NodesnFWSX424Plus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.35.1.2.1.2 | NodesnFWSX424Plus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.35.1.3 | NodesnFWSX424Plus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.35.1.3.1 | NodesnFWSX424Plus2XG | |||
| 1.3.6.1.4.1.1991.1.3.35.1.3.1.1 | NodesnFWSX424Plus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.35.1.3.1.2 | NodesnFWSX424Plus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.35.2 | NodesnFWSX448Family | |||
| 1.3.6.1.4.1.1991.1.3.35.2.1 | NodesnFWSX448BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.35.2.1.1 | NodesnFWSX448 | |||
| 1.3.6.1.4.1.1991.1.3.35.2.1.1.1 | NodesnFWSX448Switch | |||
| 1.3.6.1.4.1.1991.1.3.35.2.1.1.2 | NodesnFWSX448Router | |||
| 1.3.6.1.4.1.1991.1.3.35.2.2 | NodesnFWSX448Plus1XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.35.2.2.1 | NodesnFWSX448Plus1XG | |||
| 1.3.6.1.4.1.1991.1.3.35.2.2.1.1 | NodesnFWSX448Plus1XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.35.2.2.1.2 | NodesnFWSX448Plus1XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.35.2.3 | NodesnFWSX448Plus2XGFamily | |||
| 1.3.6.1.4.1.1991.1.3.35.2.3.1 | NodesnFWSX448Plus2XG | |||
| 1.3.6.1.4.1.1991.1.3.35.2.3.1.1 | NodesnFWSX448Plus2XGSwitch | |||
| 1.3.6.1.4.1.1991.1.3.35.2.3.1.2 | NodesnFWSX448Plus2XGRouter | |||
| 1.3.6.1.4.1.1991.1.3.36 | NodesnFastIronSuperXFamily | |||
| 1.3.6.1.4.1.1991.1.3.36.1 | NodesnFastIronSuperX | |||
| 1.3.6.1.4.1.1991.1.3.36.1.1 | NodesnFastIronSuperXSwitch | |||
| 1.3.6.1.4.1.1991.1.3.36.1.2 | NodesnFastIronSuperXRouter | |||
| 1.3.6.1.4.1.1991.1.3.36.1.3 | NodesnFastIronSuperXBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.2 | NodesnFastIronSuperXPrem | |||
| 1.3.6.1.4.1.1991.1.3.36.2.1 | NodesnFastIronSuperXPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.36.2.2 | NodesnFastIronSuperXPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.36.2.3 | NodesnFastIronSuperXPremBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.3 | NodesnFastIronSuperX800 | |||
| 1.3.6.1.4.1.1991.1.3.36.3.1 | NodesnFastIronSuperX800Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.3.2 | NodesnFastIronSuperX800Router | |||
| 1.3.6.1.4.1.1991.1.3.36.3.3 | NodesnFastIronSuperX800BaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.4 | NodesnFastIronSuperX800Prem | |||
| 1.3.6.1.4.1.1991.1.3.36.4.1 | NodesnFastIronSuperX800PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.36.4.2 | NodesnFastIronSuperX800PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.36.4.3 | NodesnFastIronSuperX800PremBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.5 | NodesnFastIronSuperX1600 | |||
| 1.3.6.1.4.1.1991.1.3.36.5.1 | NodesnFastIronSuperX1600Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.5.2 | NodesnFastIronSuperX1600Router | |||
| 1.3.6.1.4.1.1991.1.3.36.5.3 | NodesnFastIronSuperX1600BaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.6 | NodesnFastIronSuperX1600Prem | |||
| 1.3.6.1.4.1.1991.1.3.36.6.1 | NodesnFastIronSuperX1600PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.36.6.2 | NodesnFastIronSuperX1600PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.36.6.3 | NodesnFastIronSuperX1600PremBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.7 | NodesnFastIronSuperXV6 | |||
| 1.3.6.1.4.1.1991.1.3.36.7.1 | NodesnFastIronSuperXV6Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.7.2 | NodesnFastIronSuperXV6Router | |||
| 1.3.6.1.4.1.1991.1.3.36.7.3 | NodesnFastIronSuperXV6BaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.8 | NodesnFastIronSuperXV6Prem | |||
| 1.3.6.1.4.1.1991.1.3.36.8.1 | NodesnFastIronSuperXV6PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.36.8.2 | NodesnFastIronSuperXV6PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.36.8.3 | NodesnFastIronSuperXV6PremBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.8.4 | NodesnFastIronSuperXV6Prem6Router | |||
| 1.3.6.1.4.1.1991.1.3.36.9 | NodesnFastIronSuperX800V6 | |||
| 1.3.6.1.4.1.1991.1.3.36.9.1 | NodesnFastIronSuperX800V6Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.9.2 | NodesnFastIronSuperX800V6Router | |||
| 1.3.6.1.4.1.1991.1.3.36.9.3 | NodesnFastIronSuperX800V6BaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.10 | NodesnFastIronSuperX800V6Prem | |||
| 1.3.6.1.4.1.1991.1.3.36.10.1 | NodesnFastIronSuperX800V6PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.36.10.2 | NodesnFastIronSuperX800V6PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.36.10.3 | NodesnFastIronSuperX800V6PremBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.10.4 | NodesnFastIronSuperX800V6Prem6Router | |||
| 1.3.6.1.4.1.1991.1.3.36.11 | NodesnFastIronSuperX1600V6 | |||
| 1.3.6.1.4.1.1991.1.3.36.11.1 | NodesnFastIronSuperX1600V6Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.11.2 | NodesnFastIronSuperX1600V6Router | |||
| 1.3.6.1.4.1.1991.1.3.36.11.3 | NodesnFastIronSuperX1600V6BaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.12 | NodesnFastIronSuperX1600V6Prem | |||
| 1.3.6.1.4.1.1991.1.3.36.12.1 | NodesnFastIronSuperX1600V6PremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.36.12.2 | NodesnFastIronSuperX1600V6PremRouter | |||
| 1.3.6.1.4.1.1991.1.3.36.12.3 | NodesnFastIronSuperX1600V6PremBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.36.12.4 | NodesnFastIronSuperX1600V6Prem6Router | |||
| 1.3.6.1.4.1.1991.1.3.37 | NodesnBigIronSuperXFamily | |||
| 1.3.6.1.4.1.1991.1.3.37.1 | NodesnBigIronSuperX | |||
| 1.3.6.1.4.1.1991.1.3.37.1.1 | NodesnBigIronSuperXSwitch | |||
| 1.3.6.1.4.1.1991.1.3.37.1.2 | NodesnBigIronSuperXRouter | |||
| 1.3.6.1.4.1.1991.1.3.37.1.3 | NodesnBigIronSuperXBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.38 | NodesnTurboIronSuperXFamily | |||
| 1.3.6.1.4.1.1991.1.3.38.1 | NodesnTurboIronSuperX | |||
| 1.3.6.1.4.1.1991.1.3.38.1.1 | NodesnTurboIronSuperXSwitch | |||
| 1.3.6.1.4.1.1991.1.3.38.1.2 | NodesnTurboIronSuperXRouter | |||
| 1.3.6.1.4.1.1991.1.3.38.1.3 | NodesnTurboIronSuperXBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.38.2 | NodesnTurboIronSuperXPrem | |||
| 1.3.6.1.4.1.1991.1.3.38.2.1 | NodesnTurboIronSuperXPremSwitch | |||
| 1.3.6.1.4.1.1991.1.3.38.2.2 | NodesnTurboIronSuperXPremRouter | |||
| 1.3.6.1.4.1.1991.1.3.38.2.3 | NodesnTurboIronSuperXPremBaseL3Switch | |||
| 1.3.6.1.4.1.1991.1.3.39 | NodesnIMRFamily | |||
| 1.3.6.1.4.1.1991.1.3.39.1 | NodesnNetIronIMR | |||
| 1.3.6.1.4.1.1991.1.3.39.1.2 | NodesnNIIMRRouter | |||
| 1.3.6.1.4.1.1991.1.3.40 | NodesnBigIronRXFamily | |||
| 1.3.6.1.4.1.1991.1.3.40.1 | NodesnBigIronRX16 | |||
| 1.3.6.1.4.1.1991.1.3.40.1.1 | NodesnBIRX16Switch | |||
| 1.3.6.1.4.1.1991.1.3.40.1.2 | NodesnBIRX16Router | |||
| 1.3.6.1.4.1.1991.1.3.40.2 | NodesnBigIronRX8 | |||
| 1.3.6.1.4.1.1991.1.3.40.2.1 | NodesnBIRX8Switch | |||
| 1.3.6.1.4.1.1991.1.3.40.2.2 | NodesnBIRX8Router | |||
| 1.3.6.1.4.1.1991.1.3.40.3 | NodesnBigIronRX4 | |||
| 1.3.6.1.4.1.1991.1.3.40.3.1 | NodesnBIRX4Switch | |||
| 1.3.6.1.4.1.1991.1.3.40.3.2 | NodesnBIRX4Router | |||
| 1.3.6.1.4.1.1991.1.3.40.4 | NodesnBigIronRX32 | |||
| 1.3.6.1.4.1.1991.1.3.40.4.1 | NodesnBIRX32Switch | |||
| 1.3.6.1.4.1.1991.1.3.40.4.2 | NodesnBIRX32Router | |||
| 1.3.6.1.4.1.1991.1.3.41 | NodesnNetIronXMRFamily | |||
| 1.3.6.1.4.1.1991.1.3.41.1 | NodesnNetIronXMR16000 | |||
| 1.3.6.1.4.1.1991.1.3.41.1.2 | NodesnNIXMR16000Router | |||
| 1.3.6.1.4.1.1991.1.3.41.2 | NodesnNetIronXMR8000 | |||
| 1.3.6.1.4.1.1991.1.3.41.2.2 | NodesnNIXMR8000Router | |||
| 1.3.6.1.4.1.1991.1.3.41.3 | NodesnNetIronXMR4000 | |||
| 1.3.6.1.4.1.1991.1.3.41.3.2 | NodesnNIXMR4000Router | |||
| 1.3.6.1.4.1.1991.1.3.41.4 | NodesnNetIronXMR32000 | |||
| 1.3.6.1.4.1.1991.1.3.41.4.2 | NodesnNIXMR32000Router | |||
| 1.3.6.1.4.1.1991.1.3.42 | NodesnSecureIronFamily | |||
| 1.3.6.1.4.1.1991.1.3.42.9 | NodesnSecureIronLSFamily | |||
| 1.3.6.1.4.1.1991.1.3.42.9.1 | NodesnSecureIronLS100 | |||
| 1.3.6.1.4.1.1991.1.3.42.9.1.1 | NodesnSecureIronLS100Switch | |||
| 1.3.6.1.4.1.1991.1.3.42.9.1.2 | NodesnSecureIronLS100Router | |||
| 1.3.6.1.4.1.1991.1.3.42.9.2 | NodesnSecureIronLS300 | |||
| 1.3.6.1.4.1.1991.1.3.42.9.2.1 | NodesnSecureIronLS300Switch | |||
| 1.3.6.1.4.1.1991.1.3.42.9.2.2 | NodesnSecureIronLS300Router | |||
| 1.3.6.1.4.1.1991.1.3.42.10 | NodesnSecureIronTMFamily | |||
| 1.3.6.1.4.1.1991.1.3.42.10.1 | NodesnSecureIronTM100 | |||
| 1.3.6.1.4.1.1991.1.3.42.10.1.1 | NodesnSecureIronTM100Switch | |||
| 1.3.6.1.4.1.1991.1.3.42.10.1.2 | NodesnSecureIronTM100Router | |||
| 1.3.6.1.4.1.1991.1.3.42.10.2 | NodesnSecureIronTM300 | |||
| 1.3.6.1.4.1.1991.1.3.42.10.2.1 | NodesnSecureIronTM300Switch | |||
| 1.3.6.1.4.1.1991.1.3.42.10.2.2 | NodesnSecureIronTM300Router | |||
| 1.3.6.1.4.1.1991.1.3.44 | NodesnNetIronMLXFamily | |||
| 1.3.6.1.4.1.1991.1.3.44.1 | NodesnNetIronMLX16 | |||
| 1.3.6.1.4.1.1991.1.3.44.1.2 | NodesnNetIronMLX16Router | |||
| 1.3.6.1.4.1.1991.1.3.44.2 | NodesnNetIronMLX8 | |||
| 1.3.6.1.4.1.1991.1.3.44.2.2 | NodesnNetIronMLX8Router | |||
| 1.3.6.1.4.1.1991.1.3.44.3 | NodesnNetIronMLX4 | |||
| 1.3.6.1.4.1.1991.1.3.44.3.2 | NodesnNetIronMLX4Router | |||
| 1.3.6.1.4.1.1991.1.3.44.4 | NodesnNetIronMLX32 | |||
| 1.3.6.1.4.1.1991.1.3.44.4.2 | NodesnNetIronMLX32Router | |||
| 1.3.6.1.4.1.1991.1.3.45 | NodesnFGSFamily | |||
| 1.3.6.1.4.1.1991.1.3.45.1 | NodesnFGS624Family | |||
| 1.3.6.1.4.1.1991.1.3.45.1.1 | NodesnFGS624PBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.45.1.1.1 | NodesnFGS624P | |||
| 1.3.6.1.4.1.1991.1.3.45.1.1.1.1 | NodesnFGS624PSwitch | |||
| 1.3.6.1.4.1.1991.1.3.45.1.1.1.2 | NodesnFGS624PRouter | |||
| 1.3.6.1.4.1.1991.1.3.45.1.2 | NodesnFGS624XGPFamily | |||
| 1.3.6.1.4.1.1991.1.3.45.1.2.1 | NodesnFGS624XGP | |||
| 1.3.6.1.4.1.1991.1.3.45.1.2.1.1 | NodesnFGS624XGPSwitch | |||
| 1.3.6.1.4.1.1991.1.3.45.1.2.1.2 | NodesnFGS624XGPRouter | |||
| 1.3.6.1.4.1.1991.1.3.45.1.3 | NodesnFGS624PPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.45.1.3.1 | NodesnFGS624PPOE | |||
| 1.3.6.1.4.1.1991.1.3.45.1.3.1.1 | NodesnFGS624PPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.45.1.3.1.2 | NodesnFGS624PPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.45.1.4 | NodesnFGS624XGPPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.45.1.4.1 | NodesnFGS624XGPPOE | |||
| 1.3.6.1.4.1.1991.1.3.45.1.4.1.1 | NodesnFGS624XGPPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.45.1.4.1.2 | NodesnFGS624XGPPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.45.2 | NodesnFGS648Family | |||
| 1.3.6.1.4.1.1991.1.3.45.2.1 | NodesnFGS648PBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.45.2.1.1 | NodesnFGS648P | |||
| 1.3.6.1.4.1.1991.1.3.45.2.1.1.1 | NodesnFGS648PSwitch | |||
| 1.3.6.1.4.1.1991.1.3.45.2.1.1.2 | NodesnFGS648PRouter | |||
| 1.3.6.1.4.1.1991.1.3.45.2.2 | NodesnFGS648PPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.45.2.2.1 | NodesnFGS648PPOE | |||
| 1.3.6.1.4.1.1991.1.3.45.2.2.1.1 | NodesnFGS648PPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.45.2.2.1.2 | NodesnFGS648PPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.46 | NodesnFLSFamily | |||
| 1.3.6.1.4.1.1991.1.3.46.1 | NodesnFLS624Family | |||
| 1.3.6.1.4.1.1991.1.3.46.1.1 | NodesnFLS624BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.46.1.1.1 | NodesnFLS624 | |||
| 1.3.6.1.4.1.1991.1.3.46.1.1.1.1 | NodesnFLS624Switch | |||
| 1.3.6.1.4.1.1991.1.3.46.1.1.1.2 | NodesnFLS624Router | |||
| 1.3.6.1.4.1.1991.1.3.46.2 | NodesnFLS648Family | |||
| 1.3.6.1.4.1.1991.1.3.46.2.1 | NodesnFLS648BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.46.2.1.1 | NodesnFLS648 | |||
| 1.3.6.1.4.1.1991.1.3.46.2.1.1.1 | NodesnFLS648Switch | |||
| 1.3.6.1.4.1.1991.1.3.46.2.1.1.2 | NodesnFLS648Router | |||
| 1.3.6.1.4.1.1991.1.3.47 | NodesnSIFamily | |||
| 1.3.6.1.4.1.1991.1.3.47.1 | NodesnSI100 | |||
| 1.3.6.1.4.1.1991.1.3.47.1.1 | NodesnSI100Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.1.2 | NodesnSI100Router | |||
| 1.3.6.1.4.1.1991.1.3.47.2 | NodesnSI350 | |||
| 1.3.6.1.4.1.1991.1.3.47.2.1 | NodesnSI350Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.2.2 | NodesnSI350Router | |||
| 1.3.6.1.4.1.1991.1.3.47.3 | NodesnSI450 | |||
| 1.3.6.1.4.1.1991.1.3.47.3.1 | NodesnSI450Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.3.2 | NodesnSI450Router | |||
| 1.3.6.1.4.1.1991.1.3.47.4 | NodesnSI850 | |||
| 1.3.6.1.4.1.1991.1.3.47.4.1 | NodesnSI850Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.4.2 | NodesnSI850Router | |||
| 1.3.6.1.4.1.1991.1.3.47.5 | NodesnSI350Plus | |||
| 1.3.6.1.4.1.1991.1.3.47.5.1 | NodesnSI350PlusSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.5.2 | NodesnSI350PlusRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.6 | NodesnSI450Plus | |||
| 1.3.6.1.4.1.1991.1.3.47.6.1 | NodesnSI450PlusSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.6.2 | NodesnSI450PlusRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.7 | NodesnSI850Plus | |||
| 1.3.6.1.4.1.1991.1.3.47.7.1 | NodesnSI850PlusSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.7.2 | NodesnSI850PlusRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.8 | NodesnServerIronGTc | |||
| 1.3.6.1.4.1.1991.1.3.47.8.1 | NodesnServerIronGTcSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.8.2 | NodesnServerIronGTcRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.9 | NodesnServerIronGTe | |||
| 1.3.6.1.4.1.1991.1.3.47.9.1 | NodesnServerIronGTeSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.9.2 | NodesnServerIronGTeRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.10 | NodesnServerIronGTePlus | |||
| 1.3.6.1.4.1.1991.1.3.47.10.1 | NodesnServerIronGTePlusSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.10.2 | NodesnServerIronGTePlusRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.11 | NodesnServerIron4G | |||
| 1.3.6.1.4.1.1991.1.3.47.11.1 | NodesnServerIron4GSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.11.2 | NodesnServerIron4GRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.12 | NodeserverIronAdx1000 | |||
| 1.3.6.1.4.1.1991.1.3.47.12.1 | NodeserverIronAdx1000Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.12.2 | NodeserverIronAdx1000Router | |||
| 1.3.6.1.4.1.1991.1.3.47.13 | NodeserverIronAdx1000Ssl | |||
| 1.3.6.1.4.1.1991.1.3.47.13.1 | NodeserverIronAdx1000SslSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.13.2 | NodeserverIronAdx1000SslRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.14 | NodeserverIronAdx4000 | |||
| 1.3.6.1.4.1.1991.1.3.47.14.1 | NodeserverIronAdx4000Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.14.2 | NodeserverIronAdx4000Router | |||
| 1.3.6.1.4.1.1991.1.3.47.15 | NodeserverIronAdx4000Ssl | |||
| 1.3.6.1.4.1.1991.1.3.47.15.1 | NodeserverIronAdx4000SslSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.15.2 | NodeserverIronAdx4000SslRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.16 | NodeserverIronAdx8000 | |||
| 1.3.6.1.4.1.1991.1.3.47.16.1 | NodeserverIronAdx8000Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.16.2 | NodeserverIronAdx8000Router | |||
| 1.3.6.1.4.1.1991.1.3.47.17 | NodeserverIronAdx8000Ssl | |||
| 1.3.6.1.4.1.1991.1.3.47.17.1 | NodeserverIronAdx8000SslSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.17.2 | NodeserverIronAdx8000SslRouter | |||
| 1.3.6.1.4.1.1991.1.3.47.18 | NodeserverIronAdx10000 | |||
| 1.3.6.1.4.1.1991.1.3.47.18.1 | NodeserverIronAdx10000Switch | |||
| 1.3.6.1.4.1.1991.1.3.47.18.2 | NodeserverIronAdx10000Router | |||
| 1.3.6.1.4.1.1991.1.3.47.19 | NodeserverIronAdx10000Ssl | |||
| 1.3.6.1.4.1.1991.1.3.47.19.1 | NodeserverIronAdx10000SslSwitch | |||
| 1.3.6.1.4.1.1991.1.3.47.19.2 | NodeserverIronAdx10000SslRouter | |||
| 1.3.6.1.4.1.1991.1.3.48 | NodesnFastIronStackFamily | |||
| 1.3.6.1.4.1.1991.1.3.48.1 | NodesnFastIronStack | |||
| 1.3.6.1.4.1.1991.1.3.48.1.1 | NodesnFastIronStackSwitch | |||
| 1.3.6.1.4.1.1991.1.3.48.1.2 | NodesnFastIronStackRouter | |||
| 1.3.6.1.4.1.1991.1.3.48.2 | NodesnFastIronStackFCX | |||
| 1.3.6.1.4.1.1991.1.3.48.2.1 | NodesnFastIronStackFCXSwitch | |||
| 1.3.6.1.4.1.1991.1.3.48.2.2 | NodesnFastIronStackFCXBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.48.2.3 | NodesnFastIronStackFCXRouter | |||
| 1.3.6.1.4.1.1991.1.3.48.2.4 | NodesnFastIronStackFCXAdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.48.3 | NodesnFastIronStackICX6610 | |||
| 1.3.6.1.4.1.1991.1.3.48.3.1 | NodesnFastIronStackICX6610Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.3.2 | NodesnFastIronStackICX6610BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.48.3.3 | NodesnFastIronStackICX6610Router | |||
| 1.3.6.1.4.1.1991.1.3.48.3.4 | NodesnFastIronStackICX6610PRouter | |||
| 1.3.6.1.4.1.1991.1.3.48.3.5 | NodesnFastIronStackICX6610ARouter | |||
| 1.3.6.1.4.1.1991.1.3.48.4 | NodesnFastIronStackICX6430 | |||
| 1.3.6.1.4.1.1991.1.3.48.4.1 | NodesnFastIronStackICX6430Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.5 | NodesnFastIronStackICX6450 | |||
| 1.3.6.1.4.1.1991.1.3.48.5.1 | NodesnFastIronStackICX6450Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.5.2 | NodesnFastIronStackICX6450BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.48.5.3 | NodesnFastIronStackICX6450Router | |||
| 1.3.6.1.4.1.1991.1.3.48.5.4 | NodesnFastIronStackICX6450PRouter | |||
| 1.3.6.1.4.1.1991.1.3.48.6 | NodesnFastIronStackMixedStack | |||
| 1.3.6.1.4.1.1991.1.3.48.6.1 | NodesnFastIronStackMixedStackSwitch | |||
| 1.3.6.1.4.1.1991.1.3.48.6.2 | NodesnFastIronStackMixedStackBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.48.6.3 | NodesnFastIronStackMixedStackRouter | |||
| 1.3.6.1.4.1.1991.1.3.48.6.4 | NodesnFastIronStackMixedStackPRouter | |||
| 1.3.6.1.4.1.1991.1.3.48.6.5 | NodesnFastIronStackMixedStackARouter | |||
| 1.3.6.1.4.1.1991.1.3.48.7 | NodesnFastIronStackICX7750 | |||
| 1.3.6.1.4.1.1991.1.3.48.7.1 | NodesnFastIronStackICX7750Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.7.2 | NodesnFastIronStackICX7750BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.48.7.3 | NodesnFastIronStackICX7750Router | |||
| 1.3.6.1.4.1.1991.1.3.48.8 | NodesnFastIronStackICX7450 | |||
| 1.3.6.1.4.1.1991.1.3.48.8.1 | NodesnFastIronStackICX7450Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.8.2 | NodesnFastIronStackICX7450BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.48.8.3 | NodesnFastIronStackICX7450Router | |||
| 1.3.6.1.4.1.1991.1.3.48.9 | NodesnFastIronStackICX7250 | |||
| 1.3.6.1.4.1.1991.1.3.48.9.1 | NodesnFastIronStackICX7250Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.9.2 | NodesnFastIronStackICX7250BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.48.9.3 | NodesnFastIronStackICX7250Router | |||
| 1.3.6.1.4.1.1991.1.3.48.10 | NodesnFastIronStackICX7150 | |||
| 1.3.6.1.4.1.1991.1.3.48.10.1 | NodesnFastIronStackICX7150Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.10.2 | NodesnFastIronStackICX7150Router | |||
| 1.3.6.1.4.1.1991.1.3.48.11 | NodesnFastIronStackICX7650 | |||
| 1.3.6.1.4.1.1991.1.3.48.11.1 | NodesnFastIronStackICX7650Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.11.2 | NodesnFastIronStackICX7650Router | |||
| 1.3.6.1.4.1.1991.1.3.48.12 | NodesnFastIronStackICX7850 | |||
| 1.3.6.1.4.1.1991.1.3.48.12.1 | NodesnFastIronStackICX7850Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.12.2 | NodesnFastIronStackICX7850Router | |||
| 1.3.6.1.4.1.1991.1.3.48.13 | NodesnFastIronStackICX7550 | |||
| 1.3.6.1.4.1.1991.1.3.48.13.1 | NodesnFastIronStackICX7550Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.13.2 | NodesnFastIronStackICX7550Router | |||
| 1.3.6.1.4.1.1991.1.3.48.14 | NodesnFastIronStackICX8200 | |||
| 1.3.6.1.4.1.1991.1.3.48.14.1 | NodesnFastIronStackICX8200Switch | |||
| 1.3.6.1.4.1.1991.1.3.48.14.2 | NodesnFastIronStackICX8200Router | |||
| 1.3.6.1.4.1.1991.1.3.49 | NodesnCes2000Family | |||
| 1.3.6.1.4.1.1991.1.3.49.1 | NodesnCes2024F | |||
| 1.3.6.1.4.1.1991.1.3.49.2 | NodesnCes2024C | |||
| 1.3.6.1.4.1.1991.1.3.49.3 | NodesnCes2048F | |||
| 1.3.6.1.4.1.1991.1.3.49.4 | NodesnCes2048C | |||
| 1.3.6.1.4.1.1991.1.3.49.5 | NodesnCes2048FX | |||
| 1.3.6.1.4.1.1991.1.3.49.6 | NodesnCes2048CX | |||
| 1.3.6.1.4.1.1991.1.3.50 | NodesnFLSLCFamily | |||
| 1.3.6.1.4.1.1991.1.3.50.1 | NodesnFLSLC624Family | |||
| 1.3.6.1.4.1.1991.1.3.50.1.1 | NodesnFLSLC624BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.50.1.1.1 | NodesnFLSLC624 | |||
| 1.3.6.1.4.1.1991.1.3.50.1.1.1.1 | NodesnFLSLC624Switch | |||
| 1.3.6.1.4.1.1991.1.3.50.1.1.1.2 | NodesnFLSLC624Router | |||
| 1.3.6.1.4.1.1991.1.3.50.1.2 | NodesnFLSLC624POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.50.1.2.1 | NodesnFLSLC624POE | |||
| 1.3.6.1.4.1.1991.1.3.50.1.2.1.1 | NodesnFLSLC624POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.50.1.2.1.2 | NodesnFLSLC624POERouter | |||
| 1.3.6.1.4.1.1991.1.3.50.2 | NodesnFLSLC648Family | |||
| 1.3.6.1.4.1.1991.1.3.50.2.1 | NodesnFLSLC648BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.50.2.1.1 | NodesnFLSLC648 | |||
| 1.3.6.1.4.1.1991.1.3.50.2.1.1.1 | NodesnFLSLC648Switch | |||
| 1.3.6.1.4.1.1991.1.3.50.2.1.1.2 | NodesnFLSLC648Router | |||
| 1.3.6.1.4.1.1991.1.3.50.2.2 | NodesnFLSLC648POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.50.2.2.1 | NodesnFLSLC648POE | |||
| 1.3.6.1.4.1.1991.1.3.50.2.2.1.1 | NodesnFLSLC648POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.50.2.2.1.2 | NodesnFLSLC648POERouter | |||
| 1.3.6.1.4.1.1991.1.3.51 | NodesnCer2000Family | |||
| 1.3.6.1.4.1.1991.1.3.51.1 | NodesnCer2024F | |||
| 1.3.6.1.4.1.1991.1.3.51.2 | NodesnCer2024C | |||
| 1.3.6.1.4.1.1991.1.3.51.3 | NodesnCer2048F | |||
| 1.3.6.1.4.1.1991.1.3.51.4 | NodesnCer2048C | |||
| 1.3.6.1.4.1.1991.1.3.51.5 | NodesnCer2048FX | |||
| 1.3.6.1.4.1.1991.1.3.51.6 | NodesnCer2048CX | |||
| 1.3.6.1.4.1.1991.1.3.52 | NodesnFWSFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.1 | NodesnFWS624Family | |||
| 1.3.6.1.4.1.1991.1.3.52.1.1 | NodesnFWS624BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.1.1.1 | NodesnFWS624 | |||
| 1.3.6.1.4.1.1991.1.3.52.1.1.1.1 | NodesnFWS624Switch | |||
| 1.3.6.1.4.1.1991.1.3.52.1.1.1.2 | NodesnFWS624BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.1.1.1.3 | NodesnFWS624EdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.52.1.2 | NodesnFWS624GFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.1.2.1 | NodesnFWS624G | |||
| 1.3.6.1.4.1.1991.1.3.52.1.2.1.1 | NodesnFWS624GSwitch | |||
| 1.3.6.1.4.1.1991.1.3.52.1.2.1.2 | NodesnFWS624GBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.1.2.1.3 | NodesnFWS624GEdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.52.1.3 | NodesnFWS624POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.1.3.1 | NodesnFWS624POE | |||
| 1.3.6.1.4.1.1991.1.3.52.1.3.1.1 | NodesnFWS624POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.52.1.3.1.2 | NodesnFWS624POEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.1.3.1.3 | NodesnFWS624POEEdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.52.1.4 | NodesnFWS624GPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.1.4.1 | NodesnFWS624GPOE | |||
| 1.3.6.1.4.1.1991.1.3.52.1.4.1.1 | NodesnFWS624GPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.52.1.4.1.2 | NodesnFWS624GPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.1.4.1.3 | NodesnFWS624GPOEEdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.52.2 | NodesnFWS648Family | |||
| 1.3.6.1.4.1.1991.1.3.52.2.1 | NodesnFWS648BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.2.1.1 | NodesnFWS648 | |||
| 1.3.6.1.4.1.1991.1.3.52.2.1.1.1 | NodesnFWS648Switch | |||
| 1.3.6.1.4.1.1991.1.3.52.2.1.1.2 | NodesnFWS648BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.2.1.1.3 | NodesnFWS648EdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.52.2.2 | NodesnFWS648GFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.2.2.1 | NodesnFWS648G | |||
| 1.3.6.1.4.1.1991.1.3.52.2.2.1.1 | NodesnFWS648GSwitch | |||
| 1.3.6.1.4.1.1991.1.3.52.2.2.1.2 | NodesnFWS648GBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.2.2.1.3 | NodesnFWS648GEdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.52.2.3 | NodesnFWS648POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.2.3.1 | NodesnFWS648POE | |||
| 1.3.6.1.4.1.1991.1.3.52.2.3.1.1 | NodesnFWS648POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.52.2.3.1.2 | NodesnFWS648POEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.2.3.1.3 | NodesnFWS648POEEdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.52.2.4 | NodesnFWS648GPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.52.2.4.1 | NodesnFWS648GPOE | |||
| 1.3.6.1.4.1.1991.1.3.52.2.4.1.1 | NodesnFWS648GPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.52.2.4.1.2 | NodesnFWS648GPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.52.2.4.1.3 | NodesnFWS648GPOEEdgePremRouter | |||
| 1.3.6.1.4.1.1991.1.3.53 | NodesnTurboIron2 | |||
| 1.3.6.1.4.1.1991.1.3.53.1 | NodesnTI2X24Family | |||
| 1.3.6.1.4.1.1991.1.3.53.1.1 | NodesnTI2X24Switch | |||
| 1.3.6.1.4.1.1991.1.3.53.1.2 | NodesnTI2X24Router | |||
| 1.3.6.1.4.1.1991.1.3.53.2 | NodesnTI2X48Family | |||
| 1.3.6.1.4.1.1991.1.3.53.2.1 | NodesnTI2X48Switch | |||
| 1.3.6.1.4.1.1991.1.3.53.2.2 | NodesnTI2X48Router | |||
| 1.3.6.1.4.1.1991.1.3.54 | NodesnFCXFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.1 | NodesnFCX624Family | |||
| 1.3.6.1.4.1.1991.1.3.54.1.1 | NodesnFCX624SBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.1.1.1 | NodesnFCX624S | |||
| 1.3.6.1.4.1.1991.1.3.54.1.1.1.1 | NodesnFCX624SSwitch | |||
| 1.3.6.1.4.1.1991.1.3.54.1.1.1.2 | NodesnFCX624SBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.54.1.1.1.3 | NodesnFCX624SRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.1.1.1.4 | NodesnFCX624SAdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.1.2 | NodesnFCX624SHPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.1.2.1 | NodesnFCX624SHPOE | |||
| 1.3.6.1.4.1.1991.1.3.54.1.2.1.1 | NodesnFCX624SHPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.54.1.2.1.2 | NodesnFCX624SHPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.54.1.2.1.3 | NodesnFCX624SHPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.54.1.2.1.4 | NodesnFCX624SHPOEAdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.1.3 | NodesnFCX624SFFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.1.3.1 | NodesnFCX624SF | |||
| 1.3.6.1.4.1.1991.1.3.54.1.3.1.1 | NodesnFCX624SFSwitch | |||
| 1.3.6.1.4.1.1991.1.3.54.1.3.1.2 | NodesnFCX624SFBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.54.1.3.1.3 | NodesnFCX624SFRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.1.3.1.4 | NodesnFCX624SFAdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.1.4 | NodesnFCX624BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.1.4.1 | NodesnFCX624 | |||
| 1.3.6.1.4.1.1991.1.3.54.1.4.1.1 | NodesnFCX624Switch | |||
| 1.3.6.1.4.1.1991.1.3.54.1.4.1.2 | NodesnFCX624BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.54.1.4.1.3 | NodesnFCX624Router | |||
| 1.3.6.1.4.1.1991.1.3.54.1.4.1.4 | NodesnFCX624AdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.2 | NodesnFCX648Family | |||
| 1.3.6.1.4.1.1991.1.3.54.2.1 | NodesnFCX648SBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.2.1.1 | NodesnFCX648S | |||
| 1.3.6.1.4.1.1991.1.3.54.2.1.1.1 | NodesnFCX648SSwitch | |||
| 1.3.6.1.4.1.1991.1.3.54.2.1.1.2 | NodesnFCX648SBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.54.2.1.1.3 | NodesnFCX648SRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.2.1.1.4 | NodesnFCX648SAdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.2.2 | NodesnFCX648SHPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.2.2.1 | NodesnFCX648SHPOE | |||
| 1.3.6.1.4.1.1991.1.3.54.2.2.1.1 | NodesnFCX648SHPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.54.2.2.1.2 | NodesnFCX648SHPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.54.2.2.1.3 | NodesnFCX648SHPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.54.2.2.1.4 | NodesnFCX648SHPOEAdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.54.2.4 | NodesnFCX648BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.54.2.4.1 | NodesnFCX648 | |||
| 1.3.6.1.4.1.1991.1.3.54.2.4.1.1 | NodesnFCX648Switch | |||
| 1.3.6.1.4.1.1991.1.3.54.2.4.1.2 | NodesnFCX648BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.54.2.4.1.3 | NodesnFCX648Router | |||
| 1.3.6.1.4.1.1991.1.3.54.2.4.1.4 | NodesnFCX648AdvRouter | |||
| 1.3.6.1.4.1.1991.1.3.56 | NodesnICX6610Family | |||
| 1.3.6.1.4.1.1991.1.3.56.1 | NodesnICX661024Family | |||
| 1.3.6.1.4.1.1991.1.3.56.1.1 | NodesnICX661024BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.56.1.1.1 | NodesnICX661024 | |||
| 1.3.6.1.4.1.1991.1.3.56.1.1.1.1 | NodesnICX661024Switch | |||
| 1.3.6.1.4.1.1991.1.3.56.1.1.1.2 | NodesnICX661024BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.56.1.1.1.3 | NodesnICX661024Router | |||
| 1.3.6.1.4.1.1991.1.3.56.1.1.1.4 | NodesnICX661024PRouter | |||
| 1.3.6.1.4.1.1991.1.3.56.1.1.1.5 | NodesnICX661024ARouter | |||
| 1.3.6.1.4.1.1991.1.3.56.1.2 | NodesnICX661024HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.56.1.2.1 | NodesnICX661024HPOE | |||
| 1.3.6.1.4.1.1991.1.3.56.1.2.1.1 | NodesnICX661024HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.56.1.2.1.2 | NodesnICX661024HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.56.1.2.1.3 | NodesnICX661024HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.56.1.2.1.4 | NodesnICX661024HPOEPRouter | |||
| 1.3.6.1.4.1.1991.1.3.56.1.2.1.5 | NodesnICX661024HPOEARouter | |||
| 1.3.6.1.4.1.1991.1.3.56.1.3 | NodesnICX661024FFamily | |||
| 1.3.6.1.4.1.1991.1.3.56.1.3.1 | NodesnICX661024F | |||
| 1.3.6.1.4.1.1991.1.3.56.1.3.1.1 | NodesnICX661024FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.56.1.3.1.2 | NodesnICX661024FBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.56.1.3.1.3 | NodesnICX661024FRouter | |||
| 1.3.6.1.4.1.1991.1.3.56.1.3.1.4 | NodesnICX661024FPRouter | |||
| 1.3.6.1.4.1.1991.1.3.56.1.3.1.5 | NodesnICX661024FARouter | |||
| 1.3.6.1.4.1.1991.1.3.56.2 | NodesnICX661048Family | |||
| 1.3.6.1.4.1.1991.1.3.56.2.1 | NodesnICX661048BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.56.2.1.1 | NodesnICX661048 | |||
| 1.3.6.1.4.1.1991.1.3.56.2.1.1.1 | NodesnICX661048Switch | |||
| 1.3.6.1.4.1.1991.1.3.56.2.1.1.2 | NodesnICX661048BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.56.2.1.1.3 | NodesnICX661048Router | |||
| 1.3.6.1.4.1.1991.1.3.56.2.1.1.4 | NodesnICX661048PRouter | |||
| 1.3.6.1.4.1.1991.1.3.56.2.1.1.5 | NodesnICX661048ARouter | |||
| 1.3.6.1.4.1.1991.1.3.56.2.2 | NodesnICX661048HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.56.2.2.1 | NodesnICX661048HPOE | |||
| 1.3.6.1.4.1.1991.1.3.56.2.2.1.1 | NodesnICX661048HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.56.2.2.1.2 | NodesnICX661048HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.56.2.2.1.3 | NodesnICX661048HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.56.2.2.1.4 | NodesnICX661048HPOEPRouter | |||
| 1.3.6.1.4.1.1991.1.3.56.2.2.1.5 | NodesnICX661048HPOEARouter | |||
| 1.3.6.1.4.1.1991.1.3.57 | NodesnICX6430Family | |||
| 1.3.6.1.4.1.1991.1.3.57.1 | NodesnICX643024Family | |||
| 1.3.6.1.4.1.1991.1.3.57.1.1 | NodesnICX643024BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.57.1.1.1 | NodesnICX643024 | |||
| 1.3.6.1.4.1.1991.1.3.57.1.1.1.1 | NodesnICX643024Switch | |||
| 1.3.6.1.4.1.1991.1.3.57.1.2 | NodesnICX643024HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.57.1.2.1 | NodesnICX643024HPOE | |||
| 1.3.6.1.4.1.1991.1.3.57.1.2.1.1 | NodesnICX643024HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.57.2 | NodesnICX643048Family | |||
| 1.3.6.1.4.1.1991.1.3.57.2.1 | NodesnICX643048BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.57.2.1.1 | NodesnICX643048 | |||
| 1.3.6.1.4.1.1991.1.3.57.2.1.1.1 | NodesnICX643048Switch | |||
| 1.3.6.1.4.1.1991.1.3.57.2.2 | NodesnICX643048HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.57.2.2.1 | NodesnICX643048HPOE | |||
| 1.3.6.1.4.1.1991.1.3.57.2.2.1.1 | NodesnICX643048HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.57.3 | NodesnICX6430C12Family | |||
| 1.3.6.1.4.1.1991.1.3.57.3.1 | NodesnICX6430C12BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.57.3.1.1 | NodesnICX6430C12 | |||
| 1.3.6.1.4.1.1991.1.3.57.3.1.1.1 | NodesnICX6430C12Switch | |||
| 1.3.6.1.4.1.1991.1.3.58 | NodesnICX6450Family | |||
| 1.3.6.1.4.1.1991.1.3.58.1 | NodesnICX645024Family | |||
| 1.3.6.1.4.1.1991.1.3.58.1.1 | NodesnICX645024BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.58.1.1.1 | NodesnICX645024 | |||
| 1.3.6.1.4.1.1991.1.3.58.1.1.1.1 | NodesnICX645024Switch | |||
| 1.3.6.1.4.1.1991.1.3.58.1.1.1.2 | NodesnICX645024BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.58.1.1.1.3 | NodesnICX645024Router | |||
| 1.3.6.1.4.1.1991.1.3.58.1.1.1.4 | NodesnICX645024PRouter | |||
| 1.3.6.1.4.1.1991.1.3.58.1.2 | NodesnICX645024HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.58.1.2.1 | NodesnICX645024HPOE | |||
| 1.3.6.1.4.1.1991.1.3.58.1.2.1.1 | NodesnICX645024HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.58.1.2.1.2 | NodesnICX645024HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.58.1.2.1.3 | NodesnICX645024HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.58.1.2.1.4 | NodesnICX645024HPOEPRouter | |||
| 1.3.6.1.4.1.1991.1.3.58.2 | NodesnICX645048Family | |||
| 1.3.6.1.4.1.1991.1.3.58.2.1 | NodesnICX645048BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.58.2.1.1 | NodesnICX645048 | |||
| 1.3.6.1.4.1.1991.1.3.58.2.1.1.1 | NodesnICX645048Switch | |||
| 1.3.6.1.4.1.1991.1.3.58.2.1.1.2 | NodesnICX645048BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.58.2.1.1.3 | NodesnICX645048Router | |||
| 1.3.6.1.4.1.1991.1.3.58.2.1.1.4 | NodesnICX645048PRouter | |||
| 1.3.6.1.4.1.1991.1.3.58.2.2 | NodesnICX645048HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.58.2.2.1 | NodesnICX645048HPOE | |||
| 1.3.6.1.4.1.1991.1.3.58.2.2.1.1 | NodesnICX645048HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.58.2.2.1.2 | NodesnICX645048HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.58.2.2.1.3 | NodesnICX645048HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.58.2.2.1.4 | NodesnICX645048HPOEPRouter | |||
| 1.3.6.1.4.1.1991.1.3.58.3 | NodesnICX6450C12PDFamily | |||
| 1.3.6.1.4.1.1991.1.3.58.3.1 | NodesnICX6450C12PDBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.58.3.1.1 | NodesnICX6450C12PD | |||
| 1.3.6.1.4.1.1991.1.3.58.3.1.1.1 | NodesnICX6450C12PDSwitch | |||
| 1.3.6.1.4.1.1991.1.3.58.3.1.1.2 | NodesnICX6450C12PDBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.58.3.1.1.3 | NodesnICX6450C12PDRouter | |||
| 1.3.6.1.4.1.1991.1.3.58.3.1.1.4 | NodesnICX6450C12PDPRouter | |||
| 1.3.6.1.4.1.1991.1.3.59 | NodesnICX6650Family | |||
| 1.3.6.1.4.1.1991.1.3.59.1 | NodesnICX665064Family | |||
| 1.3.6.1.4.1.1991.1.3.59.1.1 | NodesnICX665064BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.59.1.1.1 | NodesnICX665064 | |||
| 1.3.6.1.4.1.1991.1.3.59.1.1.1.1 | NodesnICX665064Switch | |||
| 1.3.6.1.4.1.1991.1.3.59.1.1.1.2 | NodesnICX665064BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.59.1.1.1.3 | NodesnICX665064Router | |||
| 1.3.6.1.4.1.1991.1.3.60 | NodesnICX7750Family | |||
| 1.3.6.1.4.1.1991.1.3.60.1 | NodesnICX775048CFamily | |||
| 1.3.6.1.4.1.1991.1.3.60.1.1 | NodesnICX775048CBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.60.1.1.1 | NodesnICX775048C | |||
| 1.3.6.1.4.1.1991.1.3.60.1.1.1.1 | NodesnICX775048CSwitch | |||
| 1.3.6.1.4.1.1991.1.3.60.1.1.1.2 | NodesnICX775048CBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.60.1.1.1.3 | NodesnICX775048CRouter | |||
| 1.3.6.1.4.1.1991.1.3.60.2 | NodesnICX775048FFamily | |||
| 1.3.6.1.4.1.1991.1.3.60.2.1 | NodesnICX775048FBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.60.2.1.1 | NodesnICX775048F | |||
| 1.3.6.1.4.1.1991.1.3.60.2.1.1.1 | NodesnICX775048FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.60.2.1.1.2 | NodesnICX775048FBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.60.2.1.1.3 | NodesnICX775048FRouter | |||
| 1.3.6.1.4.1.1991.1.3.60.3 | NodesnICX775026QFamily | |||
| 1.3.6.1.4.1.1991.1.3.60.3.1 | NodesnICX775026QBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.60.3.1.1 | NodesnICX775026Q | |||
| 1.3.6.1.4.1.1991.1.3.60.3.1.1.1 | NodesnICX775026QSwitch | |||
| 1.3.6.1.4.1.1991.1.3.60.3.1.1.2 | NodesnICX775026QBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.60.3.1.1.3 | NodesnICX775026QRouter | |||
| 1.3.6.1.4.1.1991.1.3.61 | NodesnICX7450Family | |||
| 1.3.6.1.4.1.1991.1.3.61.1 | NodesnICX745024Family | |||
| 1.3.6.1.4.1.1991.1.3.61.1.1 | NodesnICX745024BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.61.1.1.1 | NodesnICX745024 | |||
| 1.3.6.1.4.1.1991.1.3.61.1.1.1.1 | NodesnICX745024Switch | |||
| 1.3.6.1.4.1.1991.1.3.61.1.1.1.2 | NodesnICX745024BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.61.1.1.1.3 | NodesnICX745024Router | |||
| 1.3.6.1.4.1.1991.1.3.61.1.2 | NodesnICX745024HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.61.1.2.1 | NodesnICX745024HPOE | |||
| 1.3.6.1.4.1.1991.1.3.61.1.2.1.1 | NodesnICX745024HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.61.1.2.1.2 | NodesnICX745024HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.61.1.2.1.3 | NodesnICX745024HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.61.2 | NodesnICX745048Family | |||
| 1.3.6.1.4.1.1991.1.3.61.2.1 | NodesnICX745048BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.61.2.1.1 | NodesnICX745048 | |||
| 1.3.6.1.4.1.1991.1.3.61.2.1.1.1 | NodesnICX745048Switch | |||
| 1.3.6.1.4.1.1991.1.3.61.2.1.1.2 | NodesnICX745048BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.61.2.1.1.3 | NodesnICX745048Router | |||
| 1.3.6.1.4.1.1991.1.3.61.2.2 | NodesnICX745048HPOEBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.61.2.2.1 | NodesnICX745048HPOE | |||
| 1.3.6.1.4.1.1991.1.3.61.2.2.1.1 | NodesnICX745048HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.61.2.2.1.2 | NodesnICX745048HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.61.2.2.1.3 | NodesnICX745048HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.61.2.3 | NodesnICX745048FBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.61.2.3.1 | NodesnICX745048F | |||
| 1.3.6.1.4.1.1991.1.3.61.2.3.1.1 | NodesnICX745048FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.61.2.3.1.2 | NodesnICX745048FBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.61.2.3.1.3 | NodesnICX745048FRouter | |||
| 1.3.6.1.4.1.1991.1.3.61.3 | NodesnICX745032Family | |||
| 1.3.6.1.4.1.1991.1.3.61.3.1 | NodesnICX745032ZPBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.61.3.1.1 | NodesnICX745032ZP | |||
| 1.3.6.1.4.1.1991.1.3.61.3.1.1.1 | NodesnICX745032ZPSwitch | |||
| 1.3.6.1.4.1.1991.1.3.61.3.1.1.2 | NodesnICX745032ZPBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.61.3.1.1.3 | NodesnICX745032ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.62 | NodesnICX7250Family | |||
| 1.3.6.1.4.1.1991.1.3.62.1 | NodesnICX725024Family | |||
| 1.3.6.1.4.1.1991.1.3.62.1.1 | NodesnICX725024BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.62.1.1.1 | NodesnICX725024 | |||
| 1.3.6.1.4.1.1991.1.3.62.1.1.1.1 | NodesnICX725024Switch | |||
| 1.3.6.1.4.1.1991.1.3.62.1.1.1.2 | NodesnICX725024BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.62.1.1.1.3 | NodesnICX725024Router | |||
| 1.3.6.1.4.1.1991.1.3.62.1.2 | NodesnICX725024HPOEFamily | |||
| 1.3.6.1.4.1.1991.1.3.62.1.2.1 | NodesnICX725024HPOE | |||
| 1.3.6.1.4.1.1991.1.3.62.1.2.1.1 | NodesnICX725024HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.62.1.2.1.2 | NodesnICX725024HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.62.1.2.1.3 | NodesnICX725024HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.62.1.3 | NodesnICX725024GFamily | |||
| 1.3.6.1.4.1.1991.1.3.62.1.3.1 | NodesnICX725024G | |||
| 1.3.6.1.4.1.1991.1.3.62.1.3.1.1 | NodesnICX725024GSwitch | |||
| 1.3.6.1.4.1.1991.1.3.62.1.3.1.2 | NodesnICX725024GBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.62.1.3.1.3 | NodesnICX725024GRouter | |||
| 1.3.6.1.4.1.1991.1.3.62.2 | NodesnICX725048Family | |||
| 1.3.6.1.4.1.1991.1.3.62.2.1 | NodesnICX725048BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.62.2.1.1 | NodesnICX725048 | |||
| 1.3.6.1.4.1.1991.1.3.62.2.1.1.1 | NodesnICX725048Switch | |||
| 1.3.6.1.4.1.1991.1.3.62.2.1.1.2 | NodesnICX725048BaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.62.2.1.1.3 | NodesnICX725048Router | |||
| 1.3.6.1.4.1.1991.1.3.62.2.2 | NodesnICX725048HPOEBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.62.2.2.1 | NodesnICX725048HPOE | |||
| 1.3.6.1.4.1.1991.1.3.62.2.2.1.1 | NodesnICX725048HPOESwitch | |||
| 1.3.6.1.4.1.1991.1.3.62.2.2.1.2 | NodesnICX725048HPOEBaseL3Router | |||
| 1.3.6.1.4.1.1991.1.3.62.2.2.1.3 | NodesnICX725048HPOERouter | |||
| 1.3.6.1.4.1.1991.1.3.63 | NodesnFastIronSPXFamily | |||
| 1.3.6.1.4.1.1991.1.3.63.1 | NodesnFastIronSPX | |||
| 1.3.6.1.4.1.1991.1.3.63.1.1 | NodesnFastIronSPXSwitch | |||
| 1.3.6.1.4.1.1991.1.3.63.1.2 | NodesnFastIronSPXRouter | |||
| 1.3.6.1.4.1.1991.1.3.64 | NodesnICX7150Family | |||
| 1.3.6.1.4.1.1991.1.3.64.1 | NodesnICX715024Family | |||
| 1.3.6.1.4.1.1991.1.3.64.1.1 | NodesnICX715024BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.1.1.1 | NodesnICX715024 | |||
| 1.3.6.1.4.1.1991.1.3.64.1.1.1.1 | NodesnICX715024Switch | |||
| 1.3.6.1.4.1.1991.1.3.64.1.1.1.2 | NodesnICX715024Router | |||
| 1.3.6.1.4.1.1991.1.3.64.1.2 | NodesnICX715024POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.1.2.1 | NodesnICX715024POE | |||
| 1.3.6.1.4.1.1991.1.3.64.1.2.1.1 | NodesnICX715024POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.1.2.1.2 | NodesnICX715024POERouter | |||
| 1.3.6.1.4.1.1991.1.3.64.1.3 | NodesnICX715024FFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.1.3.1 | NodesnICX715024F | |||
| 1.3.6.1.4.1.1991.1.3.64.1.3.1.1 | NodesnICX715024FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.1.3.1.2 | NodesnICX715024FRouter | |||
| 1.3.6.1.4.1.1991.1.3.64.2 | NodesnICX715048Family | |||
| 1.3.6.1.4.1.1991.1.3.64.2.1 | NodesnICX715048BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.2.1.1 | NodesnICX715048 | |||
| 1.3.6.1.4.1.1991.1.3.64.2.1.1.1 | NodesnICX715048Switch | |||
| 1.3.6.1.4.1.1991.1.3.64.2.1.1.2 | NodesnICX715048Router | |||
| 1.3.6.1.4.1.1991.1.3.64.2.2 | NodesnICX715048POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.2.2.1 | NodesnICX715048POE | |||
| 1.3.6.1.4.1.1991.1.3.64.2.2.1.1 | NodesnICX715048POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.2.2.1.2 | NodesnICX715048POERouter | |||
| 1.3.6.1.4.1.1991.1.3.64.2.3 | NodesnICX715048POEFFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.2.3.1 | NodesnICX715048POEF | |||
| 1.3.6.1.4.1.1991.1.3.64.2.3.1.1 | NodesnICX715048POEFSwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.2.3.1.2 | NodesnICX715048POEFRouter | |||
| 1.3.6.1.4.1.1991.1.3.64.2.4 | NodesnICX715048ZPFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.2.4.1 | NodesnICX715048ZP | |||
| 1.3.6.1.4.1.1991.1.3.64.2.4.1.1 | NodesnICX715048ZPSwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.2.4.1.2 | NodesnICX715048ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.64.3 | NodesnICX7150C12POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.3.1 | NodesnICX7150C12POEBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.3.1.1 | NodesnICX7150C12POE | |||
| 1.3.6.1.4.1.1991.1.3.64.3.1.1.1 | NodesnICX7150C12POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.3.1.1.2 | NodesnICX7150C12POERouter | |||
| 1.3.6.1.4.1.1991.1.3.64.4 | NodesnICX7150C10ZPFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.4.1 | NodesnICX7150C10ZPBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.4.1.1 | NodesnICX7150C10ZP | |||
| 1.3.6.1.4.1.1991.1.3.64.4.1.1.1 | NodesnICX7150C10ZPSwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.4.1.1.2 | NodesnICX7150C10ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.64.5 | NodesnICX7150C08PFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.5.1 | NodesnICX7150C08PBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.64.5.1.1 | NodesnICX7150C08P | |||
| 1.3.6.1.4.1.1991.1.3.64.5.1.1.1 | NodesnICX7150C08PSwitch | |||
| 1.3.6.1.4.1.1991.1.3.64.5.1.1.2 | NodesnICX7150C08PRouter | |||
| 1.3.6.1.4.1.1991.1.3.65 | NodesnICX7650Family | |||
| 1.3.6.1.4.1.1991.1.3.65.1 | NodesnICX765048Family | |||
| 1.3.6.1.4.1.1991.1.3.65.1.1 | NodesnICX765048POEBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.65.1.1.1 | NodesnICX765048POE | |||
| 1.3.6.1.4.1.1991.1.3.65.1.1.1.1 | NodesnICX765048POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.65.1.1.1.2 | NodesnICX765048POERouter | |||
| 1.3.6.1.4.1.1991.1.3.65.1.2 | NodesnICX765048FBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.65.1.2.1 | NodesnICX765048F | |||
| 1.3.6.1.4.1.1991.1.3.65.1.2.1.1 | NodesnICX765048FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.65.1.2.1.2 | NodesnICX765048FRouter | |||
| 1.3.6.1.4.1.1991.1.3.65.1.3 | NodesnICX765048ZPBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.65.1.3.1 | NodesnICX765048ZP | |||
| 1.3.6.1.4.1.1991.1.3.65.1.3.1.1 | NodesnICX765048ZPSwitch | |||
| 1.3.6.1.4.1.1991.1.3.65.1.3.1.2 | NodesnICX765048ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.66 | NodesnICX7850Family | |||
| 1.3.6.1.4.1.1991.1.3.66.1 | NodesnICX785048Family | |||
| 1.3.6.1.4.1.1991.1.3.66.1.1 | NodesnICX785048FBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.66.1.1.1 | NodesnICX785048F | |||
| 1.3.6.1.4.1.1991.1.3.66.1.1.1.1 | NodesnICX785048FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.66.1.1.1.2 | NodesnICX785048FRouter | |||
| 1.3.6.1.4.1.1991.1.3.66.1.2 | NodesnICX785048FSBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.66.1.2.1 | NodesnICX785048FS | |||
| 1.3.6.1.4.1.1991.1.3.66.1.2.1.1 | NodesnICX785048FSSwitch | |||
| 1.3.6.1.4.1.1991.1.3.66.1.2.1.2 | NodesnICX785048FSRouter | |||
| 1.3.6.1.4.1.1991.1.3.66.1.3 | NodesnICX785048CBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.66.1.3.1 | NodesnICX785048C | |||
| 1.3.6.1.4.1.1991.1.3.66.1.3.1.1 | NodesnICX785048CSwitch | |||
| 1.3.6.1.4.1.1991.1.3.66.1.3.1.2 | NodesnICX785048CRouter | |||
| 1.3.6.1.4.1.1991.1.3.66.2 | NodesnICX785032QFamily | |||
| 1.3.6.1.4.1.1991.1.3.66.2.1 | NodesnICX785032QBaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.66.2.1.1 | NodesnICX785032Q | |||
| 1.3.6.1.4.1.1991.1.3.66.2.1.1.1 | NodesnICX785032QSwitch | |||
| 1.3.6.1.4.1.1991.1.3.66.2.1.1.2 | NodesnICX785032QRouter | |||
| 1.3.6.1.4.1.1991.1.3.67 | NodesnICX7550Family | |||
| 1.3.6.1.4.1.1991.1.3.67.1 | NodesnICX755024Family | |||
| 1.3.6.1.4.1.1991.1.3.67.1.1 | NodesnICX755024BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.1.1.1 | NodesnICX755024 | |||
| 1.3.6.1.4.1.1991.1.3.67.1.1.1.1 | NodesnICX755024Switch | |||
| 1.3.6.1.4.1.1991.1.3.67.1.1.1.2 | NodesnICX755024Router | |||
| 1.3.6.1.4.1.1991.1.3.67.1.2 | NodesnICX755024POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.1.2.1 | NodesnICX755024POE | |||
| 1.3.6.1.4.1.1991.1.3.67.1.2.1.1 | NodesnICX755024POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.67.1.2.1.2 | NodesnICX755024POERouter | |||
| 1.3.6.1.4.1.1991.1.3.67.1.3 | NodesnICX755024FFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.1.3.1 | NodesnICX755024F | |||
| 1.3.6.1.4.1.1991.1.3.67.1.3.1.1 | NodesnICX755024FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.67.1.3.1.2 | NodesnICX755024FRouter | |||
| 1.3.6.1.4.1.1991.1.3.67.1.4 | NodesnICX755024ZPFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.1.4.1 | NodesnICX755024ZP | |||
| 1.3.6.1.4.1.1991.1.3.67.1.4.1.1 | NodesnICX755024ZPSwitch | |||
| 1.3.6.1.4.1.1991.1.3.67.1.4.1.2 | NodesnICX755024ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.67.2 | NodesnICX755048Family | |||
| 1.3.6.1.4.1.1991.1.3.67.2.1 | NodesnICX755048BaseFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.2.1.1 | NodesnICX755048 | |||
| 1.3.6.1.4.1.1991.1.3.67.2.1.1.1 | NodesnICX755048Switch | |||
| 1.3.6.1.4.1.1991.1.3.67.2.1.1.2 | NodesnICX755048Router | |||
| 1.3.6.1.4.1.1991.1.3.67.2.2 | NodesnICX755048POEFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.2.2.1 | NodesnICX755048POE | |||
| 1.3.6.1.4.1.1991.1.3.67.2.2.1.1 | NodesnICX755048POESwitch | |||
| 1.3.6.1.4.1.1991.1.3.67.2.2.1.2 | NodesnICX755048POERouter | |||
| 1.3.6.1.4.1.1991.1.3.67.2.3 | NodesnICX755048FFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.2.3.1 | NodesnICX755048F | |||
| 1.3.6.1.4.1.1991.1.3.67.2.3.1.1 | NodesnICX755048FSwitch | |||
| 1.3.6.1.4.1.1991.1.3.67.2.3.1.2 | NodesnICX755048FRouter | |||
| 1.3.6.1.4.1.1991.1.3.67.2.4 | NodesnICX755048ZPFamily | |||
| 1.3.6.1.4.1.1991.1.3.67.2.4.1 | NodesnICX755048ZP | |||
| 1.3.6.1.4.1.1991.1.3.67.2.4.1.1 | NodesnICX755048ZPSwitch | |||
| 1.3.6.1.4.1.1991.1.3.67.2.4.1.2 | NodesnICX755048ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.68 | NodesnICX8200Family | |||
| 1.3.6.1.4.1.1991.1.3.68.1 | NodesnICX820024Family | |||
| 1.3.6.1.4.1.1991.1.3.68.1.1 | NodesnICX820024Router | |||
| 1.3.6.1.4.1.1991.1.3.68.1.2 | NodesnICX820024PRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.1.3 | NodesnICX820024ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.1.4 | NodesnICX820024FRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.1.5 | NodesnICX820024FXRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.1.6 | NodesnICX820024PVRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.2 | NodesnICX820048Family | |||
| 1.3.6.1.4.1.1991.1.3.68.2.1 | NodesnICX820048Router | |||
| 1.3.6.1.4.1.1991.1.3.68.2.2 | NodesnICX820048PRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.2.3 | NodesnICX820048PFRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.2.4 | NodesnICX820048PF2Router | |||
| 1.3.6.1.4.1.1991.1.3.68.2.5 | NodesnICX820048ZP2Router | |||
| 1.3.6.1.4.1.1991.1.3.68.2.6 | NodesnICX820048FRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.2.7 | NodesnICX820048PVRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.3 | NodesnICX8200C08Family | |||
| 1.3.6.1.4.1.1991.1.3.68.3.1 | NodesnICX8200C08PRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.3.2 | NodesnICX8200C08PDCRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.3.3 | NodesnICX8200C08PTRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.3.4 | NodesnICX8200C08PFRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.3.5 | NodesnICX8200C08ZPRouter | |||
| 1.3.6.1.4.1.1991.1.3.68.3.6 | NodesnICX8200C08PFVRouter | |||
| 1.3.6.1.4.1.1991.1.3.69 | NodesnICX8100Family | |||
| 1.3.6.1.4.1.1991.1.3.69.1 | NodesnICX810024Family | |||
| 1.3.6.1.4.1.1991.1.3.69.1.1 | NodesnICX810024Router | |||
| 1.3.6.1.4.1.1991.1.3.69.1.2 | NodesnICX810024PRouter | |||
| 1.3.6.1.4.1.1991.1.3.69.1.3 | NodesnICX810024XRouter | |||
| 1.3.6.1.4.1.1991.1.3.69.1.4 | NodesnICX810024PXRouter | |||
| 1.3.6.1.4.1.1991.1.3.69.2 | NodesnICX810048Family | |||
| 1.3.6.1.4.1.1991.1.3.69.2.1 | NodesnICX810048Router | |||
| 1.3.6.1.4.1.1991.1.3.69.2.2 | NodesnICX810048PRouter | |||
| 1.3.6.1.4.1.1991.1.3.69.2.3 | NodesnICX810048XRouter | |||
| 1.3.6.1.4.1.1991.1.3.69.2.4 | NodesnICX810048PXRouter | |||
| 1.3.6.1.4.1.1991.1.3.69.3 | NodesnICX8100C08Family | |||
| 1.3.6.1.4.1.1991.1.3.69.3.1 | NodesnICX8100C08PFRouter | |||
| 1.3.6.1.4.1.1991.1.3.69.3.2 | NodesnICX8100C08PFXRouter | |||
| 1.3.6.1.4.1.1991.1.4 | NodeedgeIron | |||
| 1.3.6.1.4.1.1991.1.4.1 | NodeedgeIronMib | |||
| 1.3.6.1.4.1.1991.1.5 | NodeedgeIronType2 | |||
| 1.3.6.1.4.1.1991.1.5.1 | NodeedgeIronType2Mib | |||
| 1.3.6.1.4.1.1991.1.6 | NodewirelessAp | |||
| 1.3.6.1.4.1.1991.1.7 | NodewirelessProbe | |||
| 1.3.6.1.4.1.1991.1.8 | NodeaccessIron | |||
| 1.3.6.1.4.1.1991.1.9 | NodeserverIronSA | |||
| 1.3.6.1.4.1.1991.1.10 | NodewirelessApplication | |||
| 1.3.6.1.4.1.1991.1.10.1 | NodewirelessLocation | |||
| 1.3.6.1.4.1.1991.1.11 | NodeironPointMobility | |||
| 1.3.6.1.4.1.1991.1.11.1 | NodeironPointMC | |||
| 1.3.6.1.4.1.1991.1.12 | NodenetIronMtuCpeFamily | |||
| 1.3.6.1.4.1.1991.1.12.1 | NodenetIronM2404 | |||
| 1.3.6.1.4.1.1991.1.13 | NodeironView | |||
| 1.3.6.1.4.1.1991.1.14 | Nodeplatform | |||
| 1.3.6.1.4.1.1991.1.15 | NodeironPointWireless | |||
| 1.3.6.1.4.1.1991.1.15.1 | NodeironPointWirelessRFS | |||
| 1.3.6.1.4.1.1991.1.15.2 | NodeironPointWirelessAP | |||
| 1.3.6.1.4.1.1991.1.17 | IdentitybrcdEntityOIDMIB | This module defines the object identifiers (OIDs) for various physical components on Ruckus Wireless products. These OIDs are used for representing entPhysical… | ||
| 1.3.6.1.4.1.1991.1.17.1 | NodebrcdEntityOIDMIBObjects | |||
| 1.3.6.1.4.1.1991.1.17.1.1 | NodebrcdEntityOIDOther | |||
| 1.3.6.1.4.1.1991.1.17.1.2 | NodebrcdEntityOIDUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.3 | NodebrcdEntityOIDChassis | |||
| 1.3.6.1.4.1.1991.1.17.1.3.1 | NodebrcdEntityOIDChassisUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2 | NodebrcdEntityOIDChassisNetIronCes2000Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.1 | NodebrcdEntityOIDChassisNetIronCes2024F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.2 | NodebrcdEntityOIDChassisNetIronCes2024C | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.3 | NodebrcdEntityOIDChassisNetIronCes2048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.4 | NodebrcdEntityOIDChassisNetIronCes2048C | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.5 | NodebrcdEntityOIDChassisNetIronCes2048FX | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.6 | NodebrcdEntityOIDChassisNetIronCes2048CX | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.7 | NodebrcdEntityOIDChassisNetIronCes2024F4X | |||
| 1.3.6.1.4.1.1991.1.17.1.3.2.8 | NodebrcdEntityOIDChassisNetIronCes2024C4X | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3 | NodebrcdEntityOIDChassisNetIronCer2000Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.1 | NodebrcdEntityOIDChassisNetIronCer2024F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.2 | NodebrcdEntityOIDChassisNetIronCer2024C | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.3 | NodebrcdEntityOIDChassisNetIronCer2048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.4 | NodebrcdEntityOIDChassisNetIronCer2048C | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.5 | NodebrcdEntityOIDChassisNetIronCer2048FX | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.6 | NodebrcdEntityOIDChassisNetIronCer2048CX | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.7 | NodebrcdEntityOIDChassisNetIronCer2024F4X | |||
| 1.3.6.1.4.1.1991.1.17.1.3.3.8 | NodebrcdEntityOIDChassisNetIronCer2024C4X | |||
| 1.3.6.1.4.1.1991.1.17.1.3.4 | NodebrcdEntityOIDChassisNetIronXMRFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.3.4.1 | NodebrcdEntityOIDChassisNetIronXMR4000 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.4.2 | NodebrcdEntityOIDChassisNetIronXMR8000 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.4.3 | NodebrcdEntityOIDChassisNetIronXMR16000 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.4.4 | NodebrcdEntityOIDChassisNetIronXMR32000 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.5 | NodebrcdEntityOIDChassisMLXFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.3.5.1 | NodebrcdEntityOIDChassisMLX4 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.5.2 | NodebrcdEntityOIDChassisMLX8 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.5.3 | NodebrcdEntityOIDChassisMLX16 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.5.4 | NodebrcdEntityOIDChassisMLX32 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.6 | NodebrcdEntityOIDChassisMLXeFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.3.6.1 | NodebrcdEntityOIDChassisMLXe4 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.6.2 | NodebrcdEntityOIDChassisMLXe8 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.6.3 | NodebrcdEntityOIDChassisMLXe16 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.6.4 | NodebrcdEntityOIDChassisMLXe32 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.7 | NodebrcdEntityOIDChassisICX7250Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.7.1 | NodebrcdEntityOIDChassisICX725024 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.7.2 | NodebrcdEntityOIDChassisICX725024HPOE | |||
| 1.3.6.1.4.1.1991.1.17.1.3.7.3 | NodebrcdEntityOIDChassisICX725024G | |||
| 1.3.6.1.4.1.1991.1.17.1.3.7.4 | NodebrcdEntityOIDChassisICX725048 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.7.5 | NodebrcdEntityOIDChassisICX725048HPOE | |||
| 1.3.6.1.4.1.1991.1.17.1.3.8 | NodebrcdEntityOIDChassisICX7450Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.8.1 | NodebrcdEntityOIDChassisICX745024 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.8.2 | NodebrcdEntityOIDChassisICX745024HPOE | |||
| 1.3.6.1.4.1.1991.1.17.1.3.8.3 | NodebrcdEntityOIDChassisICX745032ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.3.8.4 | NodebrcdEntityOIDChassisICX745048 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.8.5 | NodebrcdEntityOIDChassisICX745048HPOE | |||
| 1.3.6.1.4.1.1991.1.17.1.3.8.6 | NodebrcdEntityOIDChassisICX745048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.9 | NodebrcdEntityOIDChassisICX7750Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.9.1 | NodebrcdEntityOIDChassisICX775048C | |||
| 1.3.6.1.4.1.1991.1.17.1.3.9.2 | NodebrcdEntityOIDChassisICX775048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.9.3 | NodebrcdEntityOIDChassisICX775026Q | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10 | NodebrcdEntityOIDChassisICX7150Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.1 | NodebrcdEntityOIDChassisICX715024 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.2 | NodebrcdEntityOIDChassisICX715024POE | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.3 | NodebrcdEntityOIDChassisICX715048 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.4 | NodebrcdEntityOIDChassisICX715048POE | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.5 | NodebrcdEntityOIDChassisICX715048POEF | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.6 | NodebrcdEntityOIDChassisICX7150C12POE | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.7 | NodebrcdEntityOIDChassisICX715048ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.8 | NodebrcdEntityOIDChassisICX715024F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.9 | NodebrcdEntityOIDChassisICX7150C10ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.10 | NodebrcdEntityOIDChassisICX7150C08P | |||
| 1.3.6.1.4.1.1991.1.17.1.3.10.11 | NodebrcdEntityOIDChassisICX7150C08PT | |||
| 1.3.6.1.4.1.1991.1.17.1.3.11 | NodebrcdEntityOIDChassisICX7650Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.11.1 | NodebrcdEntityOIDChassisICX765048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.11.2 | NodebrcdEntityOIDChassisICX765048P | |||
| 1.3.6.1.4.1.1991.1.17.1.3.11.3 | NodebrcdEntityOIDChassisICX765048ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.3.12 | NodebrcdEntityOIDChassisICX7850Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.12.1 | NodebrcdEntityOIDChassisICX785032Q | |||
| 1.3.6.1.4.1.1991.1.17.1.3.12.2 | NodebrcdEntityOIDChassisICX785048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.12.3 | NodebrcdEntityOIDChassisICX785048FS | |||
| 1.3.6.1.4.1.1991.1.17.1.3.12.4 | NodebrcdEntityOIDChassisICX785048C | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13 | NodebrcdEntityOIDChassisICX7550Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.1 | NodebrcdEntityOIDChassisICX755024 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.2 | NodebrcdEntityOIDChassisICX755024F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.3 | NodebrcdEntityOIDChassisICX755024P | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.4 | NodebrcdEntityOIDChassisICX755024ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.5 | NodebrcdEntityOIDChassisICX755048 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.6 | NodebrcdEntityOIDChassisICX755048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.7 | NodebrcdEntityOIDChassisICX755048P | |||
| 1.3.6.1.4.1.1991.1.17.1.3.13.8 | NodebrcdEntityOIDChassisICX755048ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14 | NodebrcdEntityOIDChassisICX8200Family | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.1 | NodebrcdEntityOIDChassisICX820024 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.2 | NodebrcdEntityOIDChassisICX820024F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.3 | NodebrcdEntityOIDChassisICX820024FX | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.4 | NodebrcdEntityOIDChassisICX820024P | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.5 | NodebrcdEntityOIDChassisICX820024ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.6 | NodebrcdEntityOIDChassisICX820048 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.7 | NodebrcdEntityOIDChassisICX820048F | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.8 | NodebrcdEntityOIDChassisICX820048P | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.9 | NodebrcdEntityOIDChassisICX820048PF | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.10 | NodebrcdEntityOIDChassisICX820048PF2 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.11 | NodebrcdEntityOIDChassisICX820048ZP2 | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.12 | NodebrcdEntityOIDChassisICX8200C08P | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.13 | NodebrcdEntityOIDChassisICX8200C08PF | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.14 | NodebrcdEntityOIDChassisICX8200C08PT | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.15 | NodebrcdEntityOIDChassisICX8200C08PDC | |||
| 1.3.6.1.4.1.1991.1.17.1.3.14.16 | NodebrcdEntityOIDChassisICX8200C08ZP | |||
| 1.3.6.1.4.1.1991.1.17.1.4 | NodebrcdEntityOIDBackplane | |||
| 1.3.6.1.4.1.1991.1.17.1.4.1 | NodebrcdEntityOIDBackplaneUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.4.2 | NodebrcdEntityOIDBackplaneNetIronFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.4.2.1 | NodebrcdEntityOIDBackplaneNetIronCes2000 | |||
| 1.3.6.1.4.1.1991.1.17.1.4.2.2 | NodebrcdEntityOIDBackplaneNetIronCer2000 | |||
| 1.3.6.1.4.1.1991.1.17.1.4.2.3 | NodebrcdEntityOIDBackplaneNetIronXMR | |||
| 1.3.6.1.4.1.1991.1.17.1.4.3 | NodebrcdEntityOIDBackplaneMlxFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.4.3.1 | NodebrcdEntityOIDBackplaneMLX | |||
| 1.3.6.1.4.1.1991.1.17.1.4.3.2 | NodebrcdEntityOIDBackplaneMLXe | |||
| 1.3.6.1.4.1.1991.1.17.1.5 | NodebrcdEntityOIDContainer | |||
| 1.3.6.1.4.1.1991.1.17.1.5.1 | NodebrcdEntityOIDContainerUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.5.2 | NodebrcdEntityOIDContainerPowerSupply | |||
| 1.3.6.1.4.1.1991.1.17.1.5.3 | NodebrcdEntityOIDContainerFanTray | |||
| 1.3.6.1.4.1.1991.1.17.1.5.4 | NodebrcdEntityOIDContainerMgmtModuleSlot | |||
| 1.3.6.1.4.1.1991.1.17.1.5.5 | NodebrcdEntityOIDContainerSwitchFabricModuleSlot | |||
| 1.3.6.1.4.1.1991.1.17.1.5.6 | NodebrcdEntityOIDContainerIntfModuleSlot | |||
| 1.3.6.1.4.1.1991.1.17.1.6 | NodebrcdEntityOIDPowerSupply | |||
| 1.3.6.1.4.1.1991.1.17.1.6.1 | NodebrcdEntityOIDPowerSupplyUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.6.2 | NodebrcdEntityOIDPowerSupplyAC500W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.3 | NodebrcdEntityOIDPowerSupplyDC500W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.4 | NodebrcdEntityOIDPowerSupplyAC1200W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.5 | NodebrcdEntityOIDPowerSupplyDC1200W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.6 | NodebrcdEntityOIDPowerSupplyAC1200WA | |||
| 1.3.6.1.4.1.1991.1.17.1.6.7 | NodebrcdEntityOIDPowerSupplyDC1200WA | |||
| 1.3.6.1.4.1.1991.1.17.1.6.8 | NodebrcdEntityOIDPowerSupplyAC1800W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.9 | NodebrcdEntityOIDPowerSupplyDC1800W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.10 | NodebrcdEntityOIDPowerSupplyAC2100W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.11 | NodebrcdEntityOIDPowerSupplyDC2100W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.12 | NodebrcdEntityOIDPowerSupplyAC2400W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.13 | NodebrcdEntityOIDPowerSupplyDC2400W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.14 | NodebrcdEntityOIDPowerSupplyAC3000W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.15 | NodebrcdEntityOIDPowerSupplyDC3000W | |||
| 1.3.6.1.4.1.1991.1.17.1.6.16 | NodebrcdEntityOIDPowerSupplyACPOE | |||
| 1.3.6.1.4.1.1991.1.17.1.6.17 | NodebrcdEntityOIDPowerSupplyACRegular | |||
| 1.3.6.1.4.1.1991.1.17.1.6.18 | NodebrcdEntityOIDPowerSupplyDCPOE | |||
| 1.3.6.1.4.1.1991.1.17.1.6.19 | NodebrcdEntityOIDPowerSupplyDCRegular | |||
| 1.3.6.1.4.1.1991.1.17.1.7 | NodebrcdEntityOIDFan | |||
| 1.3.6.1.4.1.1991.1.17.1.7.1 | NodebrcdEntityOIDFanUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.7.2 | NodebrcdEntityOIDChassisFanTray | |||
| 1.3.6.1.4.1.1991.1.17.1.7.3 | NodebrcdEntityOIDChassisFan | |||
| 1.3.6.1.4.1.1991.1.17.1.8 | NodebrcdEntityOIDSensor | |||
| 1.3.6.1.4.1.1991.1.17.1.8.1 | NodebrcdEntityOIDSensorUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.8.2 | NodebrcdEntityOIDSensorChipTemp | |||
| 1.3.6.1.4.1.1991.1.17.1.8.3 | NodebrcdEntityOIDSensorModuleTemp | |||
| 1.3.6.1.4.1.1991.1.17.1.9 | NodebrcdEntityOIDModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.1 | NodebrcdEntityOIDModuleUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2 | NodebrcdEntityOIDModuleMgmt | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.1 | NodebrcdEntityOIDModuleMgmtUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.2 | NodebrcdEntityOIDModuleMgmtNetIronFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.2.1 | NodebrcdEntityOIDModuleMgmtNiMlxMr | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.2.2 | NodebrcdEntityOIDModuleMgmtNiMlx32Mr | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.2.3 | NodebrcdEntityOIDModuleMgmtNiXmrMr | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.2.4 | NodebrcdEntityOIDModuleMgmtNiXmr32Mr | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.3 | NodebrcdEntityOIDModuleMgmtMlxFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.3.1 | NodebrcdEntityOIDModuleMgmtBrMlxMr2M | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.3.2 | NodebrcdEntityOIDModuleMgmtBrMlxMr2X | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.3.3 | NodebrcdEntityOIDModuleMgmtBrMlx32Mr2M | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.3.4 | NodebrcdEntityOIDModuleMgmtBrMlx32Mr2X | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.4 | NodebrcdEntityOIDModuleMgmtIcx7250Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.4.1 | NodebrcdEntityOIDModuleMgmtIcx7250624BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.4.2 | NodebrcdEntityOIDModuleMgmtIcx7250648BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.4.3 | NodebrcdEntityOIDModuleMgmtIcx7250624GBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.4.4 | NodebrcdEntityOIDModuleMgmtIcx7250624PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.4.5 | NodebrcdEntityOIDModuleMgmtIcx7250648PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.5 | NodebrcdEntityOIDModuleMgmtIcx7450Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.5.1 | NodebrcdEntityOIDModuleMgmtIcx7450624BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.5.2 | NodebrcdEntityOIDModuleMgmtIcx7450648BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.5.3 | NodebrcdEntityOIDModuleMgmtIcx7450648FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.5.4 | NodebrcdEntityOIDModuleMgmtIcx7450624PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.5.5 | NodebrcdEntityOIDModuleMgmtIcx7450648PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.5.6 | NodebrcdEntityOIDModuleMgmtIcx7450632ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.6 | NodebrcdEntityOIDModuleMgmtIcx7750Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.6.1 | NodebrcdEntityOIDModuleMgmtIcx775048CBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.6.2 | NodebrcdEntityOIDModuleMgmtIcx775048FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.6.3 | NodebrcdEntityOIDModuleMgmtIcx775026QBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.6.4 | NodebrcdEntityOIDModuleMgmtIcx775020QBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7 | NodebrcdEntityOIDModuleMgmtIcx7150Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.1 | NodebrcdEntityOIDModuleMgmtIcx7150624BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.2 | NodebrcdEntityOIDModuleMgmtIcx7150648BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.3 | NodebrcdEntityOIDModuleMgmtIcx7150624PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.4 | NodebrcdEntityOIDModuleMgmtIcx7150648PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.5 | NodebrcdEntityOIDModuleMgmtIcx7150648PoeFBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.6 | NodebrcdEntityOIDModuleMgmtIcx7150612CPoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.7 | NodebrcdEntityOIDModuleMgmtIcx7150648ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.8 | NodebrcdEntityOIDModuleMgmtIcx7150624FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.9 | NodebrcdEntityOIDModuleMgmtIcx7150C10ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.10 | NodebrcdEntityOIDModuleMgmtIcx7150C08PBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.7.11 | NodebrcdEntityOIDModuleMgmtIcx7150C08PTBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.8 | NodebrcdEntityOIDModuleMgmtIcx7650Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.8.1 | NodebrcdEntityOIDModuleMgmtIcx7650648FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.8.2 | NodebrcdEntityOIDModuleMgmtIcx7650648PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.8.3 | NodebrcdEntityOIDModuleMgmtIcx7650648ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.9 | NodebrcdEntityOIDModuleMgmtIcx7850Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.9.1 | NodebrcdEntityOIDModuleMgmtIcx7850632QBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.9.2 | NodebrcdEntityOIDModuleMgmtIcx7850648FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.9.3 | NodebrcdEntityOIDModuleMgmtIcx7850648FSBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10 | NodebrcdEntityOIDModuleMgmtIcx7550Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.1 | NodebrcdEntityOIDModuleMgmtIcx7550624BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.2 | NodebrcdEntityOIDModuleMgmtIcx7550648BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.3 | NodebrcdEntityOIDModuleMgmtIcx7550624FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.4 | NodebrcdEntityOIDModuleMgmtIcx7550648FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.5 | NodebrcdEntityOIDModuleMgmtIcx7550624PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.6 | NodebrcdEntityOIDModuleMgmtIcx7550648PoeBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.7 | NodebrcdEntityOIDModuleMgmtIcx7550624ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.10.8 | NodebrcdEntityOIDModuleMgmtIcx7550648ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11 | NodebrcdEntityOIDModuleMgmtIcx8200Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.1 | NodebrcdEntityOIDModuleMgmtIcx8200624BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.2 | NodebrcdEntityOIDModuleMgmtIcx8200624FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.3 | NodebrcdEntityOIDModuleMgmtIcx8200624FXBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.4 | NodebrcdEntityOIDModuleMgmtIcx8200624PBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.5 | NodebrcdEntityOIDModuleMgmtIcx8200624ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.6 | NodebrcdEntityOIDModuleMgmtIcx8200648BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.7 | NodebrcdEntityOIDModuleMgmtIcx8200648FBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.8 | NodebrcdEntityOIDModuleMgmtIcx8200648PBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.9 | NodebrcdEntityOIDModuleMgmtIcx8200648PFBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.10 | NodebrcdEntityOIDModuleMgmtIcx8200648PF2BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.11 | NodebrcdEntityOIDModuleMgmtIcx8200648ZP2BaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.12 | NodebrcdEntityOIDModuleMgmtIcx82006C08PBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.13 | NodebrcdEntityOIDModuleMgmtIcx82006C08PDCBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.14 | NodebrcdEntityOIDModuleMgmtIcx82006C08PFBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.15 | NodebrcdEntityOIDModuleMgmtIcx82006C08PTBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.2.11.16 | NodebrcdEntityOIDModuleMgmtIcx82006C08ZPBaseModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3 | NodebrcdEntityOIDModuleSfm | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.1 | NodebrcdEntityOIDModuleSfmUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.2 | NodebrcdEntityOIDModuleSfmNetIronFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.2.1 | NodebrcdEntityOIDModuleSfmNiXSf1 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.2.2 | NodebrcdEntityOIDModuleSfmNiXSf3 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.2.3 | NodebrcdEntityOIDModuleSfmNiX32Sf | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.2.4 | NodebrcdEntityOIDModuleSfmNiX4Hsf | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.2.5 | NodebrcdEntityOIDModuleSfmNiX16n8Hsf | |||
| 1.3.6.1.4.1.1991.1.17.1.9.3.2.6 | NodebrcdEntityOIDModuleSfmNiX32Hsf | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4 | NodebrcdEntityOIDModuleIntf | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.1 | NodebrcdEntityOIDModuleIntfUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2 | NodebrcdEntityOIDModuleIntfNetIronFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.1 | NodebrcdEntityOIDModuleIntfNiMlx1Gx20Gc | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.2 | NodebrcdEntityOIDModuleIntfNiXmr1Gx20Gc | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.3 | NodebrcdEntityOIDModuleIntfNiMlx1Gx48Ta | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.4 | NodebrcdEntityOIDModuleIntfNiMlx1Gx20Sfp | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.5 | NodebrcdEntityOIDModuleIntfNiXmr1Gx20Sfp | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.6 | NodebrcdEntityOIDModuleIntfNiMlx10Gx2 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.7 | NodebrcdEntityOIDModuleIntfNiXmr10Gx2 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.8 | NodebrcdEntityOIDModuleIntfNiMlx10Gx4 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.9 | NodebrcdEntityOIDModuleIntfNiXmr10Gx4 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.10 | NodebrcdEntityOIDModuleIntfNiMlx10Gx8D | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.2.11 | NodebrcdEntityOIDModuleIntfNiMlx10Gx8M | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3 | NodebrcdEntityOIDModuleIntfMlxFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.1 | NodebrcdEntityOIDModuleIntfBrMlx1Gcx24X | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.2 | NodebrcdEntityOIDModuleIntfBrMlx1Gcx24xMl | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.3 | NodebrcdEntityOIDModuleIntfBrMlx1Gfx24X | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.4 | NodebrcdEntityOIDModuleIntfBrMlx1Gfx24xMl | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.5 | NodebrcdEntityOIDModuleIntfBrMlx10Gx4X | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.6 | NodebrcdEntityOIDModuleIntfBrMlx10Gx4xMl | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.7 | NodebrcdEntityOIDModuleIntfBrMlx10Gx8X | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.8 | NodebrcdEntityOIDModuleIntfBrMlx10Gx24Dm | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.9 | NodebrcdEntityOIDModuleIntfBrMlx40Gx2 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.10 | NodebrcdEntityOIDModuleIntfBrMlx40Gx4 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.11 | NodebrcdEntityOIDModuleIntfBrMlx100Gx1 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.12 | NodebrcdEntityOIDModuleIntfBrMlx100Gx2 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.13 | NodebrcdEntityOIDModuleIntfBrMlx100Gx2CFP2 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.14 | NodebrcdEntityOIDModuleIntfBrMlx10Gx20 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.4.3.15 | NodebrcdEntityOIDModuleIntfBrMlx10Gx4IPSecModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5 | NodebrcdEntityOIDModuleOptics | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.1 | NodebrcdEntityOIDModuleOpticsUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.2 | NodebrcdEntityOIDModuleOpticsSFP | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.3 | NodebrcdEntityOIDModuleOpticsSFPP | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.4 | NodebrcdEntityOIDModuleOpticsXFP | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.5 | NodebrcdEntityOIDModuleOpticsCFP | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.6 | NodebrcdEntityOIDModuleOpticsQSFPP | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.7 | NodebrcdEntityOIDModuleOpticsCFP2 | |||
| 1.3.6.1.4.1.1991.1.17.1.9.5.8 | NodebrcdEntityOIDModuleOpticsGBIC | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6 | NodebrcdEntityOIDModuleService | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.1 | NodebrcdEntityOIDModuleServiceUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.2 | NodebrcdEntityOIDModuleServiceIcx7250Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.2.1 | NodebrcdEntityOIDModuleServiceIcx7250sfpplus8Port80gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.2.2 | NodebrcdEntityOIDModuleServiceIcx7250sfpplus4Port4gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.3 | NodebrcdEntityOIDModuleServiceIcx7450Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.3.1 | NodebrcdEntityOIDModuleServiceIcx7400sfpplus4Port40gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.3.2 | NodebrcdEntityOIDModuleServiceIcx7400copper4Port40gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.3.3 | NodebrcdEntityOIDModuleServiceIcx7400sfp4Port4gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.3.4 | NodebrcdEntityOIDModuleServiceIcx7400qsfpplus1Port40gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.3.5 | NodebrcdEntityOIDModuleServiceIcx7400ServiceModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.4 | NodebrcdEntityOIDModuleServiceIcx7750Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.4.1 | NodebrcdEntityOIDModuleServiceIcx7750QSFP6port40gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.4.2 | NodebrcdEntityOIDModuleServiceIcx77506Q6port40gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.5 | NodebrcdEntityOIDModuleServiceIcx7150Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.5.1 | NodebrcdEntityOIDModuleServiceIcx7150sfpplus2Port20gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.5.2 | NodebrcdEntityOIDModuleServiceIcx7150sfpplus4Port40gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.5.3 | NodebrcdEntityOIDModuleServiceIcx7150gc2Port2gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.5.4 | NodebrcdEntityOIDModuleServiceIcx7150sfpplus8Port80gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.5.5 | NodebrcdEntityOIDModuleServiceIcx7150gsfp2Port2gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.5.6 | NodebrcdEntityOIDModuleServiceIcx7150gc2Port20gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.6 | NodebrcdEntityOIDModuleServiceIcx7650Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.6.1 | NodebrcdEntityOIDModuleServiceIcx7600xgf4Port40gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.6.2 | NodebrcdEntityOIDModuleServiceIcx7600qsfp2port80gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.6.3 | NodebrcdEntityOIDModuleServiceIcx7600100g1port100gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.6.4 | NodebrcdEntityOIDModuleServiceIcx7650qsfp4port160gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.6.5 | NodebrcdEntityOIDModuleServiceIcx7650100g2port200gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.6.6 | NodebrcdEntityOIDModuleServiceIcx7650qsfp2port80gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.7 | NodebrcdEntityOIDModuleServiceIcx7850Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.7.1 | NodebrcdEntityOIDModuleServiceIcx78508port800gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.7.2 | NodebrcdEntityOIDModuleServiceIcx785012port1200gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.8 | NodebrcdEntityOIDModuleServiceIcx7550Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.8.1 | NodebrcdEntityOIDModuleServiceIcx75502port80gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.8.2 | NodebrcdEntityOIDModuleServiceIcx75502port200gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.9 | NodebrcdEntityOIDModuleServiceIcx8200Family | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.9.1 | NodebrcdEntityOIDModuleServiceIcx82004Port100gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.9.2 | NodebrcdEntityOIDModuleServiceIcx82008Port200gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.9.3 | NodebrcdEntityOIDModuleServiceIcx82002Port2gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.9.4 | NodebrcdEntityOIDModuleServiceIcx82002Port20gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.9.5 | NodebrcdEntityOIDModuleServiceIcx82002Port50gModule | |||
| 1.3.6.1.4.1.1991.1.17.1.9.6.9.6 | NodebrcdEntityOIDModuleServiceIcx82002Port20gcfModule | |||
| 1.3.6.1.4.1.1991.1.17.1.10 | NodebrcdEntityOIDPort | |||
| 1.3.6.1.4.1.1991.1.17.1.10.1 | NodebrcdEntityOIDPortUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.10.2 | NodebrcdEntityOIDPortMgmtSerial | |||
| 1.3.6.1.4.1.1991.1.17.1.10.3 | NodebrcdEntityOIDPortMgmtEth | |||
| 1.3.6.1.4.1.1991.1.17.1.10.4 | NodebrcdEntityOIDPort100BaseTx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.5 | NodebrcdEntityOIDPort100BaseFx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.6 | NodebrcdEntityOIDPortGigBaseTx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.7 | NodebrcdEntityOIDPortGigBaseFx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.8 | NodebrcdEntityOIDPort10GigBaseFx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.9 | NodebrcdEntityOIDPort40GigBaseFx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.10 | NodebrcdEntityOIDPort100GigBaseFx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.11 | NodebrcdEntityOIDPort10GigBaseTx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.12 | NodebrcdEntityOIDPort25GigBaseTx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.13 | NodebrcdEntityOIDPort40GigBaseTx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.14 | NodebrcdEntityOIDPort2500BaseTx | |||
| 1.3.6.1.4.1.1991.1.17.1.10.15 | NodebrcdEntityOIDPort5GigBaseTx | |||
| 1.3.6.1.4.1.1991.1.17.1.11 | NodebrcdEntityOIDStack | |||
| 1.3.6.1.4.1.1991.1.17.1.11.1 | NodebrcdEntityOIDStackUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2 | NodebrcdEntityOIDStackICXStackFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.1 | NodebrcdEntityOIDStackICXStackIcx7250 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.2 | NodebrcdEntityOIDStackICXStackIcx7450 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.3 | NodebrcdEntityOIDStackICXStackIcx7750 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.4 | NodebrcdEntityOIDStackICXStackIcx7150 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.5 | NodebrcdEntityOIDStackICXStackIcx7650 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.6 | NodebrcdEntityOIDStackICXStackIcx7850 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.7 | NodebrcdEntityOIDStackICXStackIcx7550 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.2.8 | NodebrcdEntityOIDStackICXStackIcx8200 | |||
| 1.3.6.1.4.1.1991.1.17.1.11.3 | NodebrcdEntityOIDStackICXSPXFamily | |||
| 1.3.6.1.4.1.1991.1.17.1.11.3.1 | NodebrcdEntityOIDStackICXSPX | |||
| 1.3.6.1.4.1.1991.1.17.1.12 | NodebrcdEntityOIDCpu | |||
| 1.3.6.1.4.1.1991.1.17.1.12.1 | NodebrcdEntityOIDCpuUnknown | |||
| 1.3.6.1.4.1.1991.1.17.1.12.2 | NodebrcdEntityOIDCpuPPC7447A | |||
| 1.3.6.1.4.1.1991.1.17.1.12.3 | NodebrcdEntityOIDCpuPPC7448 | |||
| 1.3.6.1.4.1.1991.1.17.1.12.4 | NodebrcdEntityOIDCpuPPC7451 | |||
| 1.3.6.1.4.1.1991.1.17.1.12.5 | NodebrcdEntityOIDCpuPPC7455 | |||
| 1.3.6.1.4.1.1991.1.17.1.12.6 | NodebrcdEntityOIDCpuPPC7457 | |||
| 1.3.6.1.4.1.1991.1.17.1.12.7 | NodebrcdEntityOIDCpuPPC8541 | |||
| 1.3.6.1.4.1.1991.1.17.1.12.8 | NodebrcdEntityOIDCpuPPC8541E | |||
| 1.3.6.1.4.1.1991.1.17.1.12.9 | NodebrcdEntityOIDCpuPPC8544 | |||
| 1.3.6.1.4.1.1991.1.17.1.12.10 | NodebrcdEntityOIDCpuPPC8544E | |||
| 1.3.6.1.4.1.1991.1.17.1.12.11 | NodebrcdEntityOIDCpuPPC8572 | |||
| 1.3.6.1.4.1.1991.1.17.1.12.12 | NodebrcdEntityOIDCpuPPC8572E | |||
| 1.3.6.1.4.1.1991.2 | Nodevendors | |||
| 1.3.6.1.4.1.1991.2.1 | NodedigitalChina | |||
| 1.3.6.1.4.1.1991.2.1.1 | Nodedcrs7504 | |||
| 1.3.6.1.4.1.1991.2.1.1.1 | Nodedcrs7504Switch | |||
| 1.3.6.1.4.1.1991.2.1.1.2 | Nodedcrs7504Router | |||
| 1.3.6.1.4.1.1991.2.1.2 | Nodedcrs7508 | |||
| 1.3.6.1.4.1.1991.2.1.2.1 | Nodedcrs7508Switch | |||
| 1.3.6.1.4.1.1991.2.1.2.2 | Nodedcrs7508Router | |||
| 1.3.6.1.4.1.1991.2.1.3 | Nodedcrs7515 | |||
| 1.3.6.1.4.1.1991.2.1.3.1 | Nodedcrs7515Switch | |||
| 1.3.6.1.4.1.1991.2.1.3.2 | Nodedcrs7515Router | |||
| 1.3.6.1.4.1.1991.3 | Nodeexperimental |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AclAction | INTEGER { deny(1), permit(2) } | current | Specifies an action such for ACL filter. |
| AclDirection | INTEGER { ingress(1), egress(2) } | current | The packet flow direction on interface, where the ACL should be applied. It can be either or both. |
| AclName | DisplayString (SIZE (1..255)) | current | A name uniquely identifies an access-list in a given name space like IPv4, IPv6 or MAC ACLs. |
| AclOperator | INTEGER { eq(1), neq(2), lt(3), gt(4), range(5), none(6) } | current | Represents a operator value, such as equal, not-equal, lesser than, greater than, range and none. |
| AclPolicyName | DisplayString (SIZE (1..32)) | current | A name uniquely identifies a traffic policy which can applied with IPv4, IPv6 ACL filters. |
| AclType | INTEGER { mac(1), ipv4(2), ipv6(3) } | current | Describes the type of ACL. |
| Action | INTEGER { deny(0), permit(1) } | current | Represents a action value such as deny or permit. |
| ArpState | INTEGER{ other(1), valid(2), pend(3) } | current | Represents state of ARP entry to be used. |
| ArpType | INTEGER{ other(1), static(2), dynamic(3), inspect(4), dhcp(5), dynamicDhcp(6), staticDhcp(7), host(8) } | current | Represents type of ARP entry to be used. |
| Bgp4V2AddressFamilyIdentifierTC | INTEGER { ipv4(1), ipv6(2) } | current | The representation of a BGP AFI. The value of this object should be restricted to be between the values of 0 and 65535. |
| Bgp4V2IdentifierTC | OCTET STRING(SIZE (4)) | current | The representation of a BGP Identifier. BGP Identifiers are presented in the received network byte order. The BGP Identifier is displayed as if it is an IP address, even if it would be an illegal one. |
| Bgp4V2SubsequentAddressFamilyIdentifierTC | INTEGER { unicast(1), multicast(2), mpls(4) } | current | The representation of a BGP SAFI |
| BindMode | INTEGER { other(1), active(2), inactive(3) } | current | Represents mode of the IP Source Guard entry. |
| BindType | INTEGER { other(1), ip(2) } | current | Represents type of the IP Source Guard entry. |
| BrcdVlanIdOrNoneTC | Integer32 (0 | 1..4090) | current | The VLAN-ID that uniquely identifies a specific VLAN or to no VLAN. |
| BrcdVlanIdTC | Integer32 (1..4090) | current | The VLAN-ID that uniquely identifies a specific VLAN. |
| BridgeId | OCTET STRING (SIZE(8)) | current | the Bridge-Identifier as used in the Spanning Tree |
| ClearAction | INTEGER{ valid(0), clear(1) } | current | Represents action of Clear operation to be used. |
| ClearStatus | INTEGER { normal(0), clear(1) } | current | Clear Status Values |
| DisplayString | OCTET STRING | current | This data type is used to model textual information taken from the NVT ASCII character set. By convention, objects with this syntax are declared as having SIZE (0..255) |
| Dot1xAuthState | INTEGER { other(1), initialize(2), disconnected(3), connecting(4), authenticating(5), authenticated(6), aborting(7), held(8), forceAuth(9), forceUnauth(10) } | current | The authenticator(PAE) state machine values as described below. other(1): Anything other than following states initialize(2): PAE state machine is being initialized disconnected(3): Explicit logoff request is received f… |
| EtherType | Unsigned32 | current | EtherType value from the ethernet packet shown in Hex format. |
| FdryVlanIdOrNoneTC | Integer32 (0 | 1..4094) | current | The VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must… |
| IfIndexList | OCTET STRING | current | Each octet within this value specifies a set of eight interfaces by their ifIndex values, with the first octet specifying interfaces 1 through 8, the second octet specifying interfaces 9 through 16, etc. Within each oct… |
| InetAddress | OCTET STRING (SIZE (0..255)) | current | Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType… |
| InterfaceId | current | ||
| InterfaceId2 | current | ||
| IpPrecedence | INTEGER { routine(1), priority(2), immediate(3), flash(4), flashOverride(5), critical(6), internet(7), network(8), other(9) } | current | The IP precedence value which can be used with L3 ACL filter. |
| IpTos | INTEGER { normal(1), lowCost(2), maxReliability(3), maxThroughput(4), minDelay(5) } | current | The IP TOS value which can be used with L3 ACL filter. |
| L4DeleteState | INTEGER { done(0), waitunbind(1), waitdelete(2) } | current | L4 Delete Sate |
| L4Flag | INTEGER { false(0), true(1) } | current | L4 Flag Values |
| L4RowSts | INTEGER { other(1), valid(2), delete(3), create(4), modify(5) } | current | Row Creation/Deletion Values |
| L4ServerName | OCTET STRING (SIZE(1..32)) | current | L4 Server Name |
| L4Status | INTEGER { disabled(0), enabled(1) } | current | L4 Status Values |
| MacAddress | OCTET STRING (SIZE(6)) | current | This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets. |
| Metric | INTEGER (0..65535) | current | The OSPF Metric is defined as an unsigned value in the range |
| NDState | INTEGER{ other(1), valid(2), pend(3) } | current | Represents state of ND entry to be used. |
| NDType | INTEGER{ other(1), static(2), dynamic(3), inspect(4), dhcpv6(5), dynamicDhcpv6(6), staticDhcpv6(7), host(8) } | current | Represents type of ND entry to be used. |
| PhysAddress | OCTET STRING | current | This data type is used to model media addresses. For many types of media, this will be in a binary representation. For example, an ethernet address would be represented as a string of 6 octets. |
| PortIndex | Integer32 | current | The bits 0-7 = port number. The bits 8-15 = slot number (slot for chassis only). ve port format bits 16-24 = 0x01, bits 0-15 = ve number loopback port format bits 16-24 = 0x02, bits 0-15= lb number |
| PortMask | Integer32 | current | This data type is used to model port bitmask. The maximum of ports are 32. |
| PortQosTC | INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7), invalid(127) } | current | The port QOS Priority hardware queue. 0 is lowest priority, 7 is the highest. |
| RowSts | INTEGER { other(1), valid(2), delete(3), create(4) } | current | Row Creation/Deletion Values |
| RtrStatus | INTEGER { disabled(0), enabled (1) } | current | RtrStatus Values |
| RuckusAuthAging | BITS { deniedSessions(0), permittedSessions(1) } | current | Describes, if denied and permitted sessions are enabled or disabled for aging. A bit field of '1' indicates enabled, otherwise disabled. |
| RuckusAuthFailAction | INTEGER { blockTraffic(1), restrictVlan(2) } | current | Describes the action to be taken, when the clients fail the authentication. blockTraffic(1): Clients are blocked access to the network restrictVlan(2): Clients are placed in the configured restrict VLAN, so they have li… |
| RuckusAuthMode | INTEGER { singleUntagged(1), multipleUntagged(2), singleHost(3), multipleHosts(4) } | current | Describes the authentication modes supported with Ruckus FlexAuth implementation. singleUntagged(1): multiple clients are allowed, but all must belong to one VLAN multipleUntagged(2): multiple clients are allowed and ea… |
| RuckusAuthOrder | INTEGER { dot1xMauth(1), mauthDot1x(2) } | current | Describes which authentication methods to be attempted in series of methods. Subsequent methods are tried depending on the outcome of the previous method and several rules are defined which are not explined here. dot1xM… |
| RuckusAuthTimeoutAction | INTEGER { failure(1), success(2), criticalVlan(3), other(4) } | current | Describes the action to be taken, when the authenticator times out for various readons like server busy, network access, etc. failure(1): The action taken is specified by the ruckusAuthFailAction object success(2): Clie… |
| SecurityLevel | INTEGER { noAuth(1), auth(2), authPriv(3) } | current | Represents security levels to be used. |
| SecurityModel | INTEGER{ v1(1), v2c(2), usm(3) } | current | Represents version of trap format to be used. |
| ServerUsage | INTEGER{ default(1), authenticationOnly(2), authorizationOnly(3), accountingOnly(4) } | current | Represents usage of the server for Authentication, Authorization or Accounting purpose. |
| Timeout | Integer32 | current | a STP timer in units of 1/100 seconds |
| VlanId | INTEGER (1..4094) | current | An ID used to represent VLAN identifier in the system for both untagged and tagged VLANs packets). |
| VlanTagMode | INTEGER{ tagged(1), untagged(2), dual(3) } | current | Vlan tag mode for a given vlan member. |
| VrId | Integer32 (1..255) | current | A number which, along with an interface index (ifIndex), serves to uniquely identify a virtual router on a given VRRP router. A set of one or more associated addresses is assigned to a VRID. |
| WebCacheState | INTEGER { disabled(0), enabled(1), failed(2), testing(3), suspect(4), shutdown(5), active(6) } | current | WebCacheSate |