FS-AP-MIB
64 objects
This module defines fs aggregate port(AP) mibs.
Imported Objects
| FS-SMI | fsMgmt |
| FS-TC | -- ConfigStatus IfIndex MemberMap |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.7 | IdentityfsApMIB | This module defines fs aggregate port(AP) mibs. | ||
| 1.3.6.1.4.1.52642.1.1.10.2.7.1 | NodefsApMIBObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.1 | ScalarfsApMaxNumber | read-only | current | Number of MAX aggregate ports this system supported. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.2 | ScalarfsApCurrentNumber | read-only | current | Number of current aggregate ports this system have. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.3 | TablefsApPortConfigTable | not-accessible | obsolete | aggregate port table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.3.1 | RowfsApPortConfigEntry | not-accessible | obsolete | list of aggregate port and it's port group table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.3.1.1 | ColumnfsApPortConfigPortIndex | not-accessible | obsolete | |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.3.1.2 | ColumnfsApPortConfigApIndex | read-write | obsolete | Set this value to 1 �� fsApMaxNumber indicate that add this value to that aggregate port which this aggregate port must be valid. It separates this port fr… |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.4 | TablefsApTable | not-accessible | obsolete | Aggregate ports table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.4.1 | RowfsApEntry | not-accessible | obsolete | list of aggregate ports and it's distribution table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.4.1.1 | ColumnfsApIndex | read-only | obsolete | Aggregate ports index. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.4.1.2 | ColumnfsApMemberAction | read-only | obsolete | Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicate… |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.4.1.3 | ColumnfsApPossibleMember | read-only | obsolete | Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect can be set in the aggregate port. and 0 … |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.4.1.4 | ColumnfsApMaxPtNumber | read-only | obsolete | Max number of ports this aggregate port can include. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.5 | ScalarfsApFlowBalance | read-write | current | Set the AP traffic balancing algorithm.You can choose enhanced-profile after create a Enhanced mode profile |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6 | TablefsApConfigTable | not-accessible | current | Aggregate ports table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6.1 | RowfsApConfigEntry | not-accessible | current | list of aggregate ports and it's distribution table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6.1.1 | ColumnfsApConfigNumber | read-write | current | Aggregate ports number.Set this value to 1 �� fsApMaxNumber. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6.1.2 | ColumnfsApConfigIndex | read-only | current | Aggregate ports index. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6.1.3 | ColumnfsApConfigMaxPtNumber | read-only | current | Number of MAX aggregate ports this system supported. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6.1.4 | ColumnfsApConfigCurrentPtNumber | read-only | current | Number of current ports this aggregate port have. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6.1.5 | ColumnfsApConfigPortMember | read-only | current | Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggregate port. and 0 indicate… |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.6.1.6 | ColumnfsApConfigAction | read-write | current | The value 1 to add an aggregate port, 0 to delete an aggregate port. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.7 | TablefsApPortMemberTable | not-accessible | current | Aggregate port table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.7.1 | RowfsApPortMemberEntry | not-accessible | current | list of aggregate port and it's port group table. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.7.1.1 | ColumnfsApPortMemberPortIndex | read-only | current | a switch port index. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.7.1.2 | ColumnfsApPortMemberApNumber | read-write | current | Set this value to 1 �� fsApMaxNumber indicate that add this value to that aggregate port. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.7.1.3 | ColumnfsApPortMemberAction | read-write | current | The value 1 indcate add to an aggregate port, 0 to delete from an aggregate port. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.7.1.4 | ColumnfsApPortMemberLacpStatus | read-only | current | The value indicates lacp status of aggregateport member. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.8 | ScalarfsApBalcProfName | read-write | current | Enhanced mode profile name. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9 | TablefsApProfTable | not-accessible | current | Configure the enhanced mode profile. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1 | RowfsApProfEntry | not-accessible | current | Enhanced mode profile configuration entry. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.1 | ColumnfsApProfIdx | read-only | current | Enhanced mode profile index. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.2 | ColumnfsApProfName | read-only | current | Enhanced mode profile name. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.3 | ColumnfsApProfL2SrcMac | read-write | current | Perform traffic balancing distribution according to the source MAC address of incoming layer2 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.4 | ColumnfsApProfL2DestMac | read-write | current | Perform traffic balancing distribution according to the destination MAC address of incoming layer2 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.5 | ColumnfsApProfL2Pro | read-write | current | Perform traffic balancing distribution according to the Ethernet type of the incoming layer2 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.6 | ColumnfsApProfL2Vlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming layer2 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.7 | ColumnfsApProfL2SrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming layer2 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.8 | ColumnfsApProfIpv4SrcIp | read-write | current | Perform traffic balancing distribution according to the source IP address of incoming IPv4 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.9 | ColumnfsApProfIpv4DestIp | read-write | current | Perform traffic balancing distribution according to the destination IP address of incoming IPv4 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.10 | ColumnfsApProfIpv4Pro | read-write | current | Perform traffic balancing distribution according to protocol type of the incoming IPv4 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.11 | ColumnfsApProfIpv4L4SrcPort | read-write | current | Perform traffic balancing distribution according to the L4 layer source port of incoming IPv4 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.12 | ColumnfsApProfIpv4L4DestPort | read-write | current | Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv4 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.13 | ColumnfsApProfIpv4Vlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming IPv4 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.14 | ColumnfsApProfIpv4SrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming IPv4 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.15 | ColumnfsApProfIpv6SrcIp | read-write | current | Perform traffic balancing distribution according to the source IP address of incoming IPv6 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.16 | ColumnfsApProfIpv6DestIp | read-write | current | Perform traffic balancing distribution according to the destination IP address of incoming IPv6 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.17 | ColumnfsApProfIpv6Pro | read-write | current | Perform traffic balancing distribution according to protocol type of the incoming IPv6 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.18 | ColumnfsApProfIpv6L4SrcPort | read-write | current | Perform traffic balancing distribution according to the L4 layer source port of incoming IPv6 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.19 | ColumnfsApProfIpv6L4DestPort | read-write | current | Perform traffic balancing distribution according to the L4 layer destination port of incoming IPv6 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.20 | ColumnfsApProfIpv6Vlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming IPv6 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.21 | ColumnfsApProfIpv6SrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming IPv6 packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.22 | ColumnfsApProfMplsTopLabel | read-write | current | Perform traffic balancing distribution according to the top-label of the incoming mpls packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.23 | ColumnfsApProfMpls2ndLabel | read-write | current | Perform traffic balancing distribution according to the 2nd-label of the incoming mpls packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.24 | ColumnfsApProfMplsSrcIp | read-write | current | Perform traffic balancing distribution according to the source IP address of incoming mpls packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.25 | ColumnfsApProfMplsDestIp | read-write | current | Perform traffic balancing distribution according to the destination IP address of incoming mpls packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.26 | ColumnfsApProfMplsVlan | read-write | current | Perform traffic balancing distribution according to the VLAN ID of the incoming mpls packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.1.9.1.27 | ColumnfsApProfMplsSrcPort | read-write | current | Perform traffic balancing distribution according to the source port of incoming mpls packet. |
| 1.3.6.1.4.1.52642.1.1.10.2.7.2 | NodefsApMIBConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.7.2.1 | NodefsApMIBCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.7.2.1.1 | CompliancefsApMIBCompliance | current | The compliance statement for entities which implement the FS Ap MIB | |
| 1.3.6.1.4.1.52642.1.1.10.2.7.2.2 | NodefsApMIBGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.7.2.2.1 | GroupfsApMIBGroup | current | A collection of objects providing aggregate port configure. |