FS-BFD-MIB
100 objects
This module defines fs BFD mibs.
Imported Objects
| FS-SMI | fsMgmt |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.48 | IdentityfsBfdMIB | This module defines fs BFD mibs. | ||
| 1.3.6.1.4.1.52642.1.1.10.2.48.0 | NodefsBfdNotifications | |||
| 1.3.6.1.4.1.52642.1.1.10.2.48.0.1 | NotificationfsBfdSessUp | current | This notification is generated when the fsBfdSessState object for one or more contiguous entries in fsBfdSessTable are about to enter the up(4) state from some… | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.0.2 | NotificationfsBfdSessDown | current | This notification is generated when the fsBfdSessState object for one or more contiguous entries in fsBfdSessTable are about to enter the down(2) or adminDown(… | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1 | NodefsBfdObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.1 | NodefsBfdScalarObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.1.1 | ScalarfsBfdAdminStatus | read-write | current | The global administrative status of BFD in this device. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disabl… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.1.2 | ScalarfsBfdSessNotificationsEnable | read-write | current | If this object is set to true(1), then it enables the emission of fsBfdSessUp and fsBfdSessDown notifications; otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2 | TablefsBfdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1 | RowfsBfdSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.1 | ColumnfsBfdSessIndex | not-accessible | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.2 | ColumnfsBfdSessVersionNumber | read-create | current | The version number of the BFD protocol that this session is running in. Write access is available for this object to provide ability to set desired version for… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.3 | ColumnfsBfdSessType | read-create | current | This object specifies the type of this BFD session. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.4 | ColumnfsBfdSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.5 | ColumnfsBfdSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. The value may be zero(0) if the remote discriminator is not y… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.6 | ColumnfsBfdSessDestinationUdpPort | read-create | current | This object specifies the destination UDP port number used for this BFD session's control packets. The value may be zero(0) if the session is in adminDown(1) s… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.7 | ColumnfsBfdSessSourceUdpPort | read-create | current | This object specifies the source UDP port number used for this BFD session's control packets. The value may be zero(0) if the session is in adminDown(1) state.… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.8 | ColumnfsBfdSessEchoSourceUdpPort | read-create | current | This object specifies the source UDP port number used for this BFD session's echo packets. The value may be zero(0) if the session is not running in the echo m… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.9 | ColumnfsBfdSessAdminStatus | read-create | current | A transition from 'stop' to 'start' will start the BFD state machine for the session. The state machine will have an initial state of down. A transition from '… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.10 | ColumnfsBfdSessState | read-only | current | BFD session state. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.11 | ColumnfsBfdSessRemoteHeardFlag | read-only | current | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD p… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.12 | ColumnfsBfdSessDiag | read-only | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(4) to some other state. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.13 | ColumnfsBfdSessOperMode | read-create | current | This object specifies current operating mode that BFD session is operating in. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.14 | ColumnfsBfdSessDemandModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.15 | ColumnfsBfdSessControlPlaneIndepFlag | read-create | current | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if … |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.16 | ColumnfsBfdSessMultipointFlag | read-create | current | This object indicates the Multipoint (M) bit for this session. It is set to true(1) if Multipoint (M) bit is set to 1. Otherwise, the value is set to false(2) |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.17 | ColumnfsBfdSessInterface | read-create | current | This object contains an interface index used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface as… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.18 | ColumnfsBfdSessSrcAddrType | read-create | current | This object specifies IP address type of the source IP address of this BFD session. Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4) have to be supported.… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.19 | ColumnfsBfdSessSrcAddr | read-create | current | This object specifies the source IP address of this BFD session. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.20 | ColumnfsBfdSessDstAddrType | read-create | current | This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1), ipv6(2), o… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.21 | ColumnfsBfdSessDstAddr | read-create | current | This object specifies the neighboring IP address which is being monitored with this BFD session. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.22 | ColumnfsBfdSessGTSM | read-create | current | Setting the value of this object to true(1) will enable GTSM protection of the BFD session. GTSM MUST be enabled on a singleHop(1) session if no authentication… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.23 | ColumnfsBfdSessGTSMTTL | read-create | current | This object is valid only when fsBfdSessGTSM protection is enabled on the system. This object specifies the minimum allowed TTL for received BFD control packet… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.24 | ColumnfsBfdSessDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.25 | ColumnfsBfdSessReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.26 | ColumnfsBfdSessReqMinEchoRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. Value must be zero(0)… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.27 | ColumnfsBfdSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.28 | ColumnfsBfdSessNegotiatedInterval | read-only | current | This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD Control packets. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.29 | ColumnfsBfdSessNegotiatedEchoInterval | read-only | current | This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD echo packets. Value is expected to be zero if the ses… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.30 | ColumnfsBfdSessNegotiatedDetectMult | read-only | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.31 | ColumnfsBfdSessAuthPresFlag | read-create | current | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be aut… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.32 | ColumnfsBfdSessAuthenticationType | read-create | current | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set. Max-access to this object as well as ot… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.33 | ColumnfsBfdSessAuthenticationKeyID | read-create | current | The authentication key ID in use for this session. This object permits multiple keys to be active simultaneously. When fsBfdSessAuthPresFlag is false(2), then … |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.34 | ColumnfsBfdSessAuthenticationKey | read-create | current | The authentication key. When the fsBfdSessAuthenticationType is simplePassword(1), the value of this object is the password present in the BFD packets. When th… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.35 | ColumnfsBfdSessStorageType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.36 | ColumnfsBfdSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.37 | ColumnfsBfdSessIfName | read-create | current | This object contains an interface name used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface ass… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.2.1.38 | ColumnfsBfdSessIfDes | read-create | current | This object contains an interface description used to indicate the interface which this BFD session is running on. This value can be zero if there is no interf… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3 | TablefsBfdSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1 | RowfsBfdSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. fsBfdSessPerfDiscTime is used to indicate potential discontinuity for all counte… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.1 | ColumnfsBfdSessPerfCtrlPktIn | read-only | current | The total number of BFD control messages received for this BFD session. This value MUST be equal to the least significant 32 bits of fsBfdSessPerfCtrlPktInHC. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.2 | ColumnfsBfdSessPerfCtrlPktOut | read-only | current | The total number of BFD control messages sent for this BFD session. It MUST be equal to the least significant 32 bits of significant 32 bits of fsBfdSessPerfCt… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.3 | ColumnfsBfdSessPerfCtrlPktDrop | read-only | current | The total number of BFD control messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of signific… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.4 | ColumnfsBfdSessPerfCtrlPktDropLastTime | read-only | current | The value of sysUpTime on the most recent occasion at which received BFD control message for this session was dropped. If no such up event exists, this object … |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.5 | ColumnfsBfdSessPerfEchoPktIn | read-only | current | The total number of BFD echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of significant 32 bits of fsBfdSessPerfE… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.6 | ColumnfsBfdSessPerfEchoPktOut | read-only | current | The total number of BFD echo messages sent for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPerfEchoPktOutHC if supported, a… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.7 | ColumnfsBfdSessPerfEchoPktDrop | read-only | current | The total number of BFD echo messages received for this session yet dropped for being invalid. It MUST be equal to the least significant 32 bits of fsBfdSessPe… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.8 | ColumnfsBfdSessPerfEchoPktDropLastTime | read-only | current | The value of sysUpTime on the most recent occasion at which received BFD echo message for this session was dropped. If no such up event exists, this object con… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.9 | ColumnfsBfdSessUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.10 | ColumnfsBfdSessPerfLastSessDownTime | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object con… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.11 | ColumnfsBfdSessPerfLastCommLostDiag | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.12 | ColumnfsBfdSessPerfSessUpCount | read-only | current | The number of times this session has gone into the Up state since the system last rebooted. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.13 | ColumnfsBfdSessPerfDiscTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the spe… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.14 | ColumnfsBfdSessPerfCtrlPktInHC | read-only | current | This value represents the total number of BFD control messages received for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPer… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.15 | ColumnfsBfdSessPerfCtrlPktOutHC | read-only | current | This value represents the total number of BFD control messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSess… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.16 | ColumnfsBfdSessPerfCtrlPktDropHC | read-only | current | This value represents the total number of BFD control messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least signi… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.17 | ColumnfsBfdSessPerfEchoPktInHC | read-only | current | This value represents the total number of BFD echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPerfEc… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.18 | ColumnfsBfdSessPerfEchoPktOutHC | read-only | current | This value represents the total number of BFD echo messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of fsBfdSessPer… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.3.1.19 | ColumnfsBfdSessPerfEchoPktDropHC | read-only | current | This value represents the total number of BFD echo messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least signific… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.4 | TablefsBfdSessDiscMapTable | not-accessible | current | The BFD Session Discriminator Mapping Table maps a local discriminator value to associated BFD session's FSBfdSessIndexTC used in the fsBfdSessionTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1 | RowfsBfdSessDiscMapEntry | not-accessible | current | The BFD Session Discriminator Map Entry describes BFD session that is mapped to this FSBfdSessIndexTC. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.1 | ColumnfsBfdSessDiscMapIndex | read-only | current | This object specifies the FSBfdSessIndexTC referred to by the indices of this row. In essence, a mapping is provided between these indexes and the FSBfdSessTab… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.2 | ColumnfsBfdSessDiscMapStorageType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.4.1.3 | ColumnfsBfdSessDiscMapRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.5 | TablefsBfdSessIpMapTable | not-accessible | current | The BFD Session IP Mapping Table maps given fsBfdSessInterface, fsBfdSessSrcAddrType, fsBfdSessSrcAddr, fsBfdSessDstAddrType and fsBfdSessDstAddr to an associa… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1 | RowfsBfdSessIpMapEntry | not-accessible | current | The BFD Session IP Map Entry describes BFD session that is mapped to this FSBfdSessIndexTC. |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.1 | ColumnfsBfdSessIpMapIndex | read-only | current | This object specifies the FSBfdSessIndexTC referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the FSBfdSessTab… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.2 | ColumnfsBfdSessIpMapStorageType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.1.5.1.3 | ColumnfsBfdSessIpMapRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.52642.1.1.10.2.48.2 | NodefsBfdConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.1 | NodefsBfdGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.1.1 | GroupfsBfdSessionGroup | current | Collection of objects needed for BFD sessions. | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.1.2 | GroupfsBfdSessionReadOnlyGroup | current | Collection of read-only objects needed for BFD sessions. | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.1.3 | GroupfsBfdSessionPerfGroup | current | Collection of objects needed to monitor the performance of BFD sessions. | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.1.4 | GroupfsBfdSessionPerfHCGroup | current | Collection of objects needed to monitor the performance of BFD sessions for which the values of fsBfdSessPerfPktIn, fsBfdSessPerfPktOut wrap around too quickly. | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.1.5 | GroupfsBfdNotificationGroup | current | Set of notifications implemented in this module. | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.2 | NodefsBfdCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.2.1 | CompliancefsBfdModuleFullCompliance | current | Compliance statement for agents that provide full support for the BFD-MIB module. Such devices can then be monitored and also be configured using this MIB modu… | |
| 1.3.6.1.4.1.52642.1.1.10.2.48.2.2.2 | CompliancefsBfdModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for BFD-MIB. Such devices can then be monitored but cannot be configured using t… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FSBfdCtrlDestPortNumberTC | Unsigned32 (0..65535) | current | UDP destination port number of BFD control packets. 3784 represents single hop BFD session. 4784 represents multi hop BFD session. However, syntax is left open to wider range of values purposely for two reasons: 1. impl… |
| FSBfdCtrlSourcePortNumberTC | Unsigned32 (0..65535) | current | UDP source port number of BFD control packets. However, syntax is left open to wider range of values purposely for two reasons: 1. implementation uses non-compliant port number for valid proprietary reason. 2. potential… |
| FSBfdDiagTC | INTEGER { noDiagnostic(0), controlDetectionTimeExpired(1), echoFunctionFailed(2), neighborSignaledSessionDown(3), forwardingPlaneReset(4), pathDown(5), concatenatedPathDown(6), administrativelyDown(7), reverseConcatenatedPathDown(8) } | current | A common BFD diagnostic code. |
| FSBfdIntervalTC | Unsigned32 (0..4294967295) | current | The BFD interval in microseconds. |
| FSBfdMultiplierTC | Unsigned32 (1..255) | current | The BFD failure detection multiplier. |
| FSBfdSessAuthenticationTypeTC | INTEGER { noAuthentication(-1), reserved(0), simplePassword(1), keyedMD5(2), meticulousKeyedMD5(3), keyedSHA1(4), meticulousKeyedSHA1(5) } | current | BFD authentication type |
| FSBfdSessIndexTC | Unsigned32 (1..4294967295) | current | An index used to uniquely identify BFD sessions. |
| FSBfdSessionAuthenticationKeyTC | OCTET STRING(SIZE(0..252)) | current | BFD authentication key type. A FSBfdSessionAuthenticationKeyTC is always interpreted within the context of an FSBfdSessAuthenticationTypeTC value. Every usage of the FSBfdSessionAuthenticationTypeTC textual convention i… |
| FSBfdSessOperModeTC | INTEGER { asyncModeWEchoFunction(1), asynchModeWOEchoFunction(2), demandModeWEchoFunction(3), demandModeWOEchoFunction(4) } | current | BFD session operating mode |
| FSBfdSessStateTC | INTEGER { adminDown(1), down(2), init(3), up(4), failing(5) } | current | BFD session state. State failing(5) is only applicable if corresponding session is running in BFD version 0. |
| FSBfdSessTypeTC | INTEGER { singleHop(1), multiHopTotallyArbitraryPaths(2), multiHopOutOfBandSignaling(3), multiHopUnidirectionalLinks(4), multiPointHead(5), multiPointTail(6) } | current | BFD session type |