FS-FIBER-MIB
109 objects
This module defines fs fiber module information mibs.
Imported Objects
| FS-SMI | fsMgmt |
| FS-TC | IfIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.105 | IdentityfsFiberMIB | This module defines fs fiber module information mibs. | ||
| 1.3.6.1.4.1.52642.1.1.10.2.105.1 | NodefsFiberMIBObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1 | TablefsFiberTable | not-accessible | current | A table for getting Fiber Module information |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1 | RowfsFiberEntry | not-accessible | current | Entry of a Fiber Module information. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.1 | ColumnfsFiberPortIndex | not-accessible | current | Port index of the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.2 | ColumnfsFiberPortDescr | read-only | current | Discription of the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.3 | ColumnfsFiberTransceiverType | read-only | current | Transceiver type of the Fiber module insered into the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.4 | ColumnfsFiberConnectorType | read-only | current | Connector type of the Fiber module insered into the port. If the transceiver type of Fiber module is unknown(1), then this object contains a zero value. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.5 | ColumnfsFiberWavelength | read-only | current | The value of wavelength of the Fiber module insered into the port. If the transceiver type of Fiber module is either fiber100CopperSFP(7) or fiber1000CopperSFP… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.6 | ColumnfsFiberTransferDistanceSMF | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.7 | ColumnfsFiberTransferDistance62point5umOM1 | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.8 | ColumnfsFiberTransferDistance62point5um | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.9 | ColumnfsFiberTransferDistance50umOM2 | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.10 | ColumnfsFiberTransferDistance50um | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.11 | ColumnfsFiberTransferDistance50umOM3 | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.12 | ColumnfsFiberTransferDistanceEBW50um | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.13 | ColumnfsFiberTransferDistanceCopper | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while opera… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.14 | ColumnfsFiberTransferDistanceCableAssembly | read-only | current | The value of transfer distance of the Fiber module insered into the port. This value specifies the link length of the Cable assembly passive. The value is in u… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.15 | ColumnfsFiberDDMSupportStatus | read-only | current | This object indicates that whether the Digital Diagnostic Monitors is implemeted. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.16 | ColumnfsFiberSerialNumber | read-only | current | The serial number of the Fiber module insered into the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.17 | ColumnfsFiberTemp | read-only | current | The temperature of the Fiber module insered into the port. The value is in units of degrees Celsius. If the fsFiberDDMSupportStatus is false, the temperature v… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.18 | ColumnfsFiberTempStatus | read-only | current | The status ok(2) indicates that the temperature of the Fiber module is in the normal level. The status warning(3) indicates that the temperature of the Fiber m… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.19 | ColumnfsFiberVoltage | read-only | current | The voltage of the Fiber module insered into the port. The value is in units of mVolts. If the fsFiberDDMSupportStatus is false, the voltage value is 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.20 | ColumnfsFiberVoltageStatus | read-only | current | The status ok(2) indicates that the voltage of the Fiber module is in the normal level. The status warning(3) indicates that the voltage of the Fiber module ex… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.21 | ColumnfsFiberBias | read-only | current | The bias of the Fiber module insered into the port. The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SF… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.22 | ColumnfsFiberBiasStatus | read-only | current | The status ok(2) indicates that the bias of the Fiber module is in the normal level. The status warning(3) indicates that the bias of the Fiber module exceeds … |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.23 | ColumnfsFiberChannel1Bias | read-only | current | The bias in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.24 | ColumnfsFiberChannel1BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 1 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 1 excee… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.25 | ColumnfsFiberChannel2Bias | read-only | current | The bias in Channel 2 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.26 | ColumnfsFiberChannel2BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 2 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 2 excee… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.27 | ColumnfsFiberChannel3Bias | read-only | current | The bias in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.28 | ColumnfsFiberChannel3BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 3 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 3 excee… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.29 | ColumnfsFiberChannel4Bias | read-only | current | The bias in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.30 | ColumnfsFiberChannel4BiasStatus | read-only | current | The status ok(2) indicates that the bias in the Channel 4 of QSFP+ is in the normal level. The status warning(3) indicates that the bias in the Channel 4 excee… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.31 | ColumnfsFiberRXpowerIntegerpart | read-only | current | The integer part of Rx power of the Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber modu… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.32 | ColumnfsFiberRXpowerDecimalpart | read-only | current | The decimal part of Rx power of the Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber modu… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.33 | ColumnfsFiberRXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3). If the fsFiberDDMSupportStatus is false or the … |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.34 | ColumnfsFiberRXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power of the Fiber module is in the normal level. The status warning(3) indicates that the Rx power of the Fiber module … |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.35 | ColumnfsFiberChannel1RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.36 | ColumnfsFiberChannel1RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.37 | ColumnfsFiberChannel1RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 1 of QSFP+. If the fsFiberDDMSupportS… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.38 | ColumnfsFiberChannel1RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 1 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.39 | ColumnfsFiberChannel2RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.40 | ColumnfsFiberChannel2RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.41 | ColumnfsFiberChannel2RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 2 of QSFP+. If the fsFiberDDMSupportS… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.42 | ColumnfsFiberChannel2RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 2 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.43 | ColumnfsFiberChannel3RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.44 | ColumnfsFiberChannel3RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.45 | ColumnfsFiberChannel3RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 3 of QSFP+. If the fsFiberDDMSupportS… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.46 | ColumnfsFiberChannel3RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 3 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.47 | ColumnfsFiberChannel4RXpowerIntegerpart | read-only | current | The integer part of Rx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.48 | ColumnfsFiberChannel4RXpowerDecimalpart | read-only | current | The decimal part of Rx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.49 | ColumnfsFiberChannel4RXpowertype | read-only | current | The value indicates whether the received power measurement represents average input optical power(2) or oma(3) in Channel 4 of QSFP+. If the fsFiberDDMSupportS… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.50 | ColumnfsFiberChannel4RXpowerStatus | read-only | current | The status ok(2) indicates that the Rx power in the Channel 4 of QSFP+ is in the normal level. The status warning(3) indicates that the Rx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.51 | ColumnfsFiberTXpowerIntegerpart | read-only | current | The integer part of Tx power of the Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber modu… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.52 | ColumnfsFiberTXpowerDecimalpart | read-only | current | The decimal part of Tx power of the Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber modu… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.53 | ColumnfsFiberTXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power of the Fiber module is in the normal level. The status warning(3) indicates that the Tx power of the Fiber module … |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.54 | ColumnfsFiberChannel1TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.55 | ColumnfsFiberChannel1TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.56 | ColumnfsFiberChannel1TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 1 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.57 | ColumnfsFiberChannel2TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.58 | ColumnfsFiberChannel2TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 1 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.59 | ColumnfsFiberChannel2TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 2 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.60 | ColumnfsFiberChannel3TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.61 | ColumnfsFiberChannel3TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 3 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.62 | ColumnfsFiberChannel3TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 3 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.63 | ColumnfsFiberChannel4TXpowerIntegerpart | read-only | current | The integer part of Tx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.64 | ColumnfsFiberChannel4TXpowerDecimalpart | read-only | current | The decimal part of Tx power in Channel 4 of the QSFP+ Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is fals… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.65 | ColumnfsFiberChannel4TXpowerStatus | read-only | current | The status ok(2) indicates that the Tx power in the Channel 4 of QSFP+ is in the normal level. The status warning(3) indicates that the Tx power in the Channel… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.66 | ColumnfsFiberRXpowerSign | read-only | current | The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.67 | ColumnfsFiberChannel1RXpowerSign | read-only | current | The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.68 | ColumnfsFiberChannel2RXpowerSign | read-only | current | The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.69 | ColumnfsFiberChannel3RXpowerSign | read-only | current | The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.70 | ColumnfsFiberChannel4RXpowerSign | read-only | current | The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.71 | ColumnfsFiberTXpowerSign | read-only | current | The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.72 | ColumnfsFiberChannel1TXpowerSign | read-only | current | The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.73 | ColumnfsFiberChannel2TXpowerSign | read-only | current | The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.74 | ColumnfsFiberChannel3TXpowerSign | read-only | current | The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.75 | ColumnfsFiberChannel4TXpowerSign | read-only | current | The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.76 | ColumnfsFiberRXpowerInteger | read-only | current | The integer of Rx power of the Fiber module insered into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber modu… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.77 | ColumnfsFiberChannel1RXpowerInteger | read-only | current | The integer part of Rx power in Channel 1 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.78 | ColumnfsFiberChannel2RXpowerInteger | read-only | current | The integer part of Rx power in Channel 1 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.79 | ColumnfsFiberChannel3RXpowerInteger | read-only | current | The integer part of Rx power in Channel 3 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.80 | ColumnfsFiberChannel4RXpowerInteger | read-only | current | The integer part of Rx power in Channel 4 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.81 | ColumnfsFiberTXpowerInteger | read-only | current | The integer part of Tx power of the Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fibe… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.82 | ColumnfsFiberChannel1TXpowerInteger | read-only | current | The integer part of Tx power in Channel 1 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.83 | ColumnfsFiberChannel2TXpowerInteger | read-only | current | The integer part of Tx power in Channel 1 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.84 | ColumnfsFiberChannel3TXpowerInteger | read-only | current | The integer part of Tx power in Channel 3 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.85 | ColumnfsFiberChannel4TXpowerInteger | read-only | current | The integer part of Tx power in Channel 4 of the QSFP+ Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus i… |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2 | TablefsFiberVendorTable | not-accessible | current | A table of Vendor info entries. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1 | RowfsFiberVendorEntry | not-accessible | current | Entry contains Vendor info. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.1 | ColumnfsFiberVendorPortIndex | read-only | current | The port index of Vendor info . |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.2 | ColumnfsFiberVendorName | read-only | current | The description of vendor name. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.3 | ColumnfsFiberVendorOUI | read-only | current | Added by Observium developers |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.4 | ColumnfsFiberVendorPN | read-only | current | Added by Observium developers |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.5 | ColumnfsFiberVendorRev | read-only | current | Added by Observium developers |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.6 | ColumnfsFiberVendorDate | read-only | current | Added by Observium developers |
| 1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.7 | ColumnfsFiberVendorEncoding | read-only | current | Added by Observium developers |
| 1.3.6.1.4.1.52642.1.1.10.2.105.2 | NodefsFiberAntifakeMIBTraps | |||
| 1.3.6.1.4.1.52642.1.1.10.2.105.2.1 | ScalarfsFiberAntifakeIntfNameDesc | accessible-for-notify | current | The description of the interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.2.2 | ScalarfsFiberAntifakeSerialNumberDesc | accessible-for-notify | current | The description of the serial number of the fiber module. |
| 1.3.6.1.4.1.52642.1.1.10.2.105.2.3 | NotificationfsFiberAntifakeTrap | current | When detect the fiber module is not original fs fiber module, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.105.3 | NodefsFiberMIBConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.105.3.1 | NodefsFiberMIBCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.105.3.1.1 | CompliancefsFiberMIBConpliance | current | The compliance statement for entities which implement the FS Fiber MIB | |
| 1.3.6.1.4.1.52642.1.1.10.2.105.3.2 | NodefsFiberMIBGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.105.3.2.1 | GroupfsFiberMIBGroup | current | A collection of objects providing Fiber managment. | |
| 1.3.6.1.4.1.52642.1.1.10.2.105.3.2.2 | GroupfsFiberAntifakeIntfNameDescGroup | current | Objects that providing a literal description of the interface. | |
| 1.3.6.1.4.1.52642.1.1.10.2.105.3.2.3 | GroupfsFiberAntifakeSerialNumberDescGroup | current | Objects that providing a literal description of the fiber module serial number. |