FS-MPLS-L3VPN-BGP-MIB
31 objects
This MIB contains managed object definitions for the neighbors' parameters of the Layer-3 Multiprotocol Label Switching Virtual Private Networks. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC4382; see the RFC itself for full legal notices.
Imported Objects
| BGP4-MIB | bgp4PathAttrIpAddrPrefix bgp4PathAttrIpAddrPrefixLen bgp4PathAttrPeer |
| FS-SMI | fsMgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| MPLS-L3VPN-STD-MIB | mplsL3VpnVrfName |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus StorageType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.100 | IdentityfsmplsL3VpnNbrMIB | This MIB contains managed object definitions for the neighbors' parameters of the Layer-3 Multiprotocol Label Switching Virtual Private Networks. Copyright (C)… | ||
| 1.3.6.1.4.1.52642.1.1.10.2.100.1 | TablefsmplsL3VpnVrfBgpNbrTable | not-accessible | current | This table specifies per-interface MPLS L3VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated wi… |
| 1.3.6.1.4.1.52642.1.1.10.2.100.1.1 | RowfsmplsL3VpnVrfBgpNbrEntry | not-accessible | current | An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. The indexing provides an ordering of VRFs per-VPN interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.1.1.1 | ColumnfsmplsL3VpnVrfBgpNbrRole | read-only | current | This attribute shall specify the role of the bgp neighbor in Layer-3 Multiprotocol Label Switching Virtual Private Networks. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.1.1.2 | ColumnfsmplsL3VpnVrfBgpNbrType | read-only | current | This attribute shall specify the address family of the PE's address. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.1.1.3 | ColumnfsmplsL3VpnVrfBgpNbrAddr | read-write | current | This attribute shall specify the address of the PE. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.1.1.4 | ColumnfsmplsL3VpnVrfBgpNbrRowStatus | read-create | current | This attribute is used to change or delete one row of this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.1.1.5 | ColumnfsmplsL3VpnVrfBgpNbrStorageType | read-only | current | The storage type for this VPN bgp neighbor. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.1.1.6 | ColumnfsmplsL3VpnVrfBgpNbrRemoteAS | read-write | current | The remote autonomous system number. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2 | TablefsmplsL3VpnVrfBgpPAtrTable | not-accessible | current | This table specifies per-interface MPLS L3VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated wi… |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1 | RowfsmplsL3VpnVrfBgpPAtrEntry | not-accessible | current | An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. The indexing provides an ordering of VRFs per-VPN interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.1 | ColumnfsmplsL3VpnVrfBgpPAtrPeerType | read-only | current | This attribute shall specify the address family of the peer's address. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.2 | ColumnfsmplsL3VpnVrfBgpPAtrIpAddrPfxType | read-only | current | This attribute shall specify the address family of the address. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.3 | ColumnfsmplsL3VpnVrfBgpPAtrOrigin | read-only | current | This attribute shall specify the origin of the path. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.4 | ColumnfsmplsL3VpnVrfBgpPAtrNextHop | read-only | current | This attribute shall specify the address of the border router. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.5 | ColumnfsmplsL3VpnVrfBgpPAtrASPathSegment | read-only | current | This sequence is discription by a trible group <type, length, value>. The length of the type member is one octet. Its possible values are as follow: AS_SET: un… |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.6 | ColumnfsmplsL3VpnVrfBgpPAtrNextHopType | read-only | current | This attribute shall specify the address family of the border router's address. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.7 | ColumnfsmplsL3VpnVrfBgpPAtrMultiExitDisc | read-only | current | This attribute shall specify the med value of an advertised route. When it is set to -1, it indicates that this attribute is not exsiting. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.8 | ColumnfsmplsL3VpnVrfBgpPAtrLocalPref | read-only | current | The originating BGP4 speaker's degree of preference for an advertised route When it is setto -1, it indicates that this attribute is not exsiting. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.9 | ColumnfsmplsL3VpnVrfBgpPAtrAtomicAggregate | read-only | current | The originating BGP4 speaker's aggrating attribute for an advertised route. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.10 | ColumnfsmplsL3VpnVrfBgpPAtrAggregatorAS | read-only | current | The prev BGP4 speaker's as number, who excude the aggregation of the advertised route. when it is set to 0, it indicates the attribute not exists. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.11 | ColumnfsmplsL3VpnVrfBgpPAtrAggrAddrType | read-only | current | The attribute shall specify the address family of the aggregated address for the advertised route. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.12 | ColumnfsmplsL3VpnVrfBgpPAtrAggregatorAddr | read-only | current | The attribute shall specify the address of the prev BGP4 speaker's as number, who excude the aggregation of the advertised route. When it is set to 0, it indic… |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.13 | ColumnfsmplsL3VpnVrfBgpPAtrCalcLocalPref | read-only | current | The attribute shall specify the degree of preference calculated by the origin BGP4 speaker for an advertised route. When it is set to -1, it indicates this att… |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.14 | ColumnfsmplsL3VpnVrfBgpPAtrBest | read-only | current | The attribute shall specify when the advertised route is the best route. |
| 1.3.6.1.4.1.52642.1.1.10.2.100.2.1.15 | ColumnfsmplsL3VpnVrfBgpPAtrUnknown | read-only | current | The attribute shall specify the unkown attribute of the advertised route. When its length is 0, it indicates that it does not exists. And the context beyond th… |
| 1.3.6.1.4.1.52642.1.1.10.2.100.3 | NodefsmplsL3VpnVrfBgpNbrCom | |||
| 1.3.6.1.4.1.52642.1.1.10.2.100.3.1 | NodefsmplsL3VpnVrfBgpCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.100.3.1.1 | CompliancefsmplsL3VpnVrfBgpCompliance | current | The compliance statement for mpls L3VPN BGP neighbors which implement the MPLS-L3VPN-PRIVATE-MIB. | |
| 1.3.6.1.4.1.52642.1.1.10.2.100.3.2 | NodefsmplsL3VpnVrfBgpGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.100.3.2.1 | GroupfsmplsL3VpnVrfBgpGroup | current | A collection of objects providing for configuration of an mpls L3VPN BGP neighbor which implements the fsmplsL3VpnNbrMIB. |