FS-MPLSOAM-MIB
76 objects
Copyright (C) FS Networks. This MIB module contains managed object definitions for the Operation, Administration and Maintenance (OAM) as in [Y.1711]. The MPLS OAM is Operation Administration and Maintenance mechanism for MPLS network.
Imported Objects
| FS-SMI | fsMgmt |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.93 | IdentityfsMplsOam | Copyright (C) FS Networks. This MIB module contains managed object definitions for the Operation, Administration and Maintenance (OAM) as in [Y.1711]. The MPLS… | ||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1 | NodefsMplsOamPs | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1 | NodefsMplsOamObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.1 | ScalarfsMplsOamCapability | read-write | current | Whether OAM is enabled globally. 1: enable; 0: disable; The default value is disabled globally. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2 | TablefsMplsOamIgrTable | not-accessible | current | This table specifies information for configuring and monitoring LSP(or te tunnel). |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1 | RowfsMplsOamIgrEntry | not-accessible | current | A row in this table represents information for configuring and monitoring LSP(or te tunnel). It is indexed by fsMplsOamIgrIndex, which uniquely identifies a si… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.1 | ColumnfsMplsOamIgrIndex | read-only | current | This is a unique index in the ingress table. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.2 | ColumnfsMplsOamIgrLspName | read-create | current | The name of an LSP(or te tunnel). |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.3 | ColumnfsMplsOamIgrLspId | read-create | current | The ID of an LSP. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.4 | ColumnfsMplsOamIgrDetType | read-create | current | The OAM defect detection function is based on the periodic transmission of CV or FFD packets from ingress to egress of an LSP. Each CV and FFD packet carries a… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.5 | ColumnfsMplsOamIgrDetFreq | read-create | current | For CV: the frequency is 1s. For FFD: the frequency is one of 50ms,100ms,200ms,500ms. 0: 1s(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.6 | ColumnfsMplsOamIgrRevType | read-create | current | The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.7 | ColumnfsMplsOamIgrRevLspName | read-create | current | The name of a return LSP. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.8 | ColumnfsMplsOamIgrEnable | read-create | current | The detection of OAM is enabled/disabled on the ingress of an LSP. 0: The OAM detection is disabled on the ingress; 1: The OAM detection is enabled on the ingr… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.9 | ColumnfsMplsOamIgrValid | read-only | current | 0: stop detection of OAM; 1: start detection of OAM. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.10 | ColumnfsMplsOamIgrAvaState | read-only | current | If the LSP Timer (T3) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP de… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.11 | ColumnfsMplsOamIgrDefectType | read-only | current | There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.2.1.12 | ColumnfsMplsOamIgrRowStatus | read-create | current | It is used to create and delete a row in this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3 | TablefsMplsOamEgrTable | not-accessible | current | This table specifies information for configuring and monitoring LSP(or te tunnel). |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1 | RowfsMplsOamEgrEntry | not-accessible | current | A row in this table represents information for configuring and monitoring LSP(or te tunnel). It is indexed by fsMplsOamEgrIndex, which uniquely identifies a si… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.1 | ColumnfsMplsOamEgrIndex | read-only | current | This is a unique index in the egress table. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.2 | ColumnfsMplsOamEgrLspName | read-create | current | The name of static LSP at egress. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.3 | ColumnfsMplsOamEgrLsrId | read-create | current | The Ingress LSR ID of an LSP. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.4 | ColumnfsMplsOamEgrLspId | read-create | current | The ID of an LSP. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.5 | ColumnfsMplsOamEgrDetType | read-create | current | 0: adaptability; 1: CV; 2: FFD. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.6 | ColumnfsMplsOamEgrDetFreq | read-create | current | 0: 1000ms(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms; 5: invalid. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.7 | ColumnfsMplsOamEgrRevType | read-create | current | The BDI flow is injected on a return path (such as a return LSP) to inform the upstream LSR (which is the source of the forward LSP) that there is a defect at … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.8 | ColumnfsMplsOamEgrRevLspName | read-create | current | The name of a return LSP. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.9 | ColumnfsMplsOamEgrAutoEn | read-create | current | The adaptability is enabled/disabled. 0: disable; 1: enable. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.10 | ColumnfsMplsOamEgrAutoOvertime | read-create | current | The wait-time of adaptability. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.11 | ColumnfsMplsOamEgrBDIFreq | read-create | current | For CV: the frequency is 1s. For FFD: the frequency is one of 50ms,100ms,200ms,500ms. 0: 1000ms(only for cv); 1: 50ms; 2: 100ms; 3: 200ms; 4: 500ms. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.12 | ColumnfsMplsOamEgrEnable | read-create | current | The detection of OAM is enabled/disabled on the egress of an LSP. 0: The OAM detection is disabled on the egress; 1: The OAM detection is enabled on the egress. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.13 | ColumnfsMplsOamEgrValid | read-only | current | 1: stop detection of OAM; 2: start detection of OAM. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.14 | ColumnfsMplsOamEgrAvaState | read-only | current | If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP de… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.15 | ColumnfsMplsOamEgrDefectType | read-only | current | There are 6 types of defect in total, among which there are 4 MPLS layer user-plane defects(i.e., dLOCV, dTTSI_Mismatch, dTTSI_Mismerge and dExcess), 1 Server … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.3.1.16 | ColumnfsMplsOamEgrRowStatus | read-create | current | It is used to create and delete a row in this table. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.1.4 | ScalarfsMplsOamTrapOpen | read-write | current | 0: disable 1: enable |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2 | NodefsMplsOamNotifications | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.1 | NotificationfsMplsOamIgrLSPOutDefect | current | This notification is generated when the LSP exits defect state at the LSP ingress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.2 | NotificationfsMplsOamIgrLSPInDefect | current | This notification is generated when the LSP enters defect state at the LSP ingress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.3 | NotificationfsMplsOamIgrLSPAva | current | This notification is generated when the LSP enters available state at the LSP ingress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.4 | NotificationfsMplsOamIgrLSPUnAva | current | This notification is generated when the LSP enters unavailable state at the LSP ingress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.5 | NotificationfsMplsOamEgrLSPOutDefect | current | This notification is generated when the LSP exits defect state at the LSP egress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.6 | NotificationfsMplsOamEgrLSPInDefect | current | This notification is generated when the LSP enters defect state at the LSP egress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.7 | NotificationfsMplsOamEgrLSPAva | current | This notification is generated when the LSP enters available state at the LSP egress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.8 | NotificationfsMplsOamEgrLSPUnAva | current | This notification is generated when the LSP enters unavailable state at the LSP egress. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.9 | NotificationfsMplsOamEgrFirstPkt | current | If adaptability is enabled, this notification is generated when the LSP egress receives the first CV/FFD packet. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.2.10 | NotificationfsMplsOamEgrAutoProFDI | current | The FDI is sent downstream from the upstream node in an LSP to inform the downstream end of an LSP of a upstream defect. It is also generated when the adaptabi… | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3 | NodefsMplsPsObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1 | TablefsMplsPsTable | not-accessible | current | This table specifies information for configuring and monitoring LSP protection group(or te tunnel protection group). |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1 | RowfsMplsPsEntry | not-accessible | current | A row in this table represents information for configuring and monitoring LSP protection group(or te tunnel protection group). It is indexed by fsMplsPsIndex, … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.1 | ColumnfsMplsPsIndex | read-only | current | This is a unique index in the protection group table. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.2 | ColumnfsMplsPsGroupName | read-only | current | The protection group name. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.3 | ColumnfsMplsPsType | read-only | current | The MPLS PS architecture can be a 1+1 type, a 1:1 type, a shared mesh type, or a packet 1+1 type. 1. In the 1+1 architecture type, a protection LSP is dedicate… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.4 | ColumnfsMplsPsWorkLspName | read-only | current | The name of work-lsp(or work-tunnel). |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.5 | ColumnfsMplsPsWorkLspId | read-only | current | The ID of work-lsp(or work-tunnel). |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.6 | ColumnfsMplsPsProtectLspName | read-only | current | The name of protect-lsp. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.7 | ColumnfsMplsPsProtectLspId | read-only | current | The ID of protect-lsp(or protect-tunnel). |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.8 | ColumnfsMplsPsRevertiveMode | read-only | current | The protection group revertive mode can be non-revertive and revertive protection switching. 1. In revertive mode of operation, under conditions where working … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.9 | ColumnfsMplsPsWTR | read-only | current | Wait to restore is only applicable for the revertive mode and applies to a working LSP. It prevents reversion back to select the working LSP until the wait to … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.10 | ColumnfsMplsPsHoldOff | read-only | current | In general, if lower layer(e.g., SDH or optical) protection mechanisms are being utilized in conjunction with MPLS layer protection mechanisms, then the lower … |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.11 | ColumnfsMplsPsSwitchCondition | read-only | current | The following switch initiation criteria exist: 1. an externally initiated command(clear, lockout of protection, forced switch, manual switch); 2. an automatic… |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.12 | ColumnfsMplsPsWorkLspState | read-only | current | The state of working lsp state lists below: 1: defect state; 2: non-defect state. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.13 | ColumnfsMplsPsProtLspState | read-only | current | The state of protection lsp state lists below: 1: defect state; 2: non-defect state. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.14 | ColumnfsMplsPsSwitchResult | read-only | current | Which lsp is user traffic being transmitted: 1: working-lsp; 2: protection-lsp. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.15 | ColumnfsMplsPsRowStatus | read-only | current | It is used to create and delete a row in this table. 1: active; 2: notInService; 3: notReady; 4: createAndGo; 5: createAndWait; 6: destroy. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.3.2 | ScalarfsMplsPsTrapOpen | read-write | current | 1:enable; 2:disable. |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.4 | NodefsMplsPsNotifications | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.4.1 | NotificationfsMplsPsSwitchPtoW | current | This notification is generated when switching traffic from protection-lsp to working-lsp. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.4.2 | NotificationfsMplsPsSwitchWtoP | current | This notification is generated when switching traffic from woking-lsp to protection-lsp. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.5 | NodefsMplsOamPsConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.5.1 | NodefsMplsOamPsCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.5.1.1 | CompliancefsMplsOamPsGroupCompliance | current | The compliance statement for mpls oam protection group. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.5.2 | NodefsMplsOamPsGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.5.2.1 | GroupfsMplsPsGroup | current | The compliance statement for mpls oam protection group management. | |
| 1.3.6.1.4.1.52642.1.1.10.2.93.1.5.2.2 | GroupfsMplsPsNotificationGroup | current | Description. |