FS-NMS-HAL-IF-MIB
49 objects
No module-level DESCRIPTION found.
Imported Objects
| FS-NMS-IF-MIB | nmsIfObjects |
| FS-NMS-SMI | nmsMgmt |
| IP-MIB | ipv6InterfaceIdentifier |
| RFC1155-SMI | Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.9.63.1.3 | TablephysicalIfConfigTable | not-accessible | mandatory | A list of physical interface configuration entries. |
| 1.3.6.1.4.1.52642.9.63.1.3.1 | RowphysicalIfConfigEntry | not-accessible | mandatory | An interface configuration entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.1 | ColumnifConfigIndex | read-only | mandatory | Index of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.2 | Columnkeepalive | read-write | mandatory | Loopback detect of interface. The range is 0-32767. 0 means disable. Default is 0(disable). |
| 1.3.6.1.4.1.52642.9.63.1.3.1.3 | Columnspeed | read-write | mandatory | Interface speed. Only valid for non-PON interface. 1-auto, 2-10M, 3-100M, 4-1000M, 5-10000M. Default is auto. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.4 | Columnduplex | read-write | mandatory | Interface duplex. Only valid for non-PON interface. 1-auto, 2-full, 3-half. Default is auto. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.5 | Columnmedium | read-write | mandatory | Interface medium. Only valid for non-PON interface. 1-auto, 2-copper, 3-fiber. Default is auto. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.6 | ColumnfiberAutoConfig | read-write | mandatory | Fiber port auto config mode, include speed and duplex. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.7 | ColumnflowControl | read-write | mandatory | Interface flow control config. 1-on, 2-off. Default is off. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.8 | ColumnerrorFrameCheck | read-write | mandatory | Error frame check config. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.52642.9.63.1.3.1.9 | ColumnphyIfType | read-only | mandatory | Port initial type. 1-copper, 2-fiber, 3-combo, 4-other. |
| 1.3.6.1.4.1.52642.9.63.1.4 | TablephysicalIfBlockTable | not-accessible | mandatory | A list of physical interface Block entries. |
| 1.3.6.1.4.1.52642.9.63.1.4.1 | RowphysicalIfBlockEntry | not-accessible | mandatory | An interface Block entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.4.1.1 | ColumnifBlockIndex | read-only | mandatory | Index of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.52642.9.63.1.4.1.2 | ColumnbroadcastBlock | read-write | mandatory | Broadcast block config. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.52642.9.63.1.4.1.3 | ColumnmulticastBlock | read-write | mandatory | Multicast block config. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.52642.9.63.1.4.1.4 | ColumnunicastBlock | read-write | mandatory | Unknown unicast block config. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.52642.9.63.1.5 | NodeifSecurity | |||
| 1.3.6.1.4.1.52642.9.63.1.5.1 | TableportSecurityTable | not-accessible | mandatory | A list of interface security entries. |
| 1.3.6.1.4.1.52642.9.63.1.5.1.1 | RowportSecurityEntry | not-accessible | mandatory | An interface security entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.5.1.1.1 | ColumnifSecurityIndex | read-only | mandatory | Index of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.52642.9.63.1.5.1.1.2 | ColumnportSecMode | read-write | mandatory | Port security mode. 1-dynamic, 2-static accept, 3-static reject, 4-none. LLID interface only support dynamic mode. PON and PSG interface don't support any mode… |
| 1.3.6.1.4.1.52642.9.63.1.5.1.1.3 | ColumnmaxMacAddressNum | read-write | mandatory | Max mac address number that interface is allowed learning. Min num is 1. Max num is different for different device. Default is 1. |
| 1.3.6.1.4.1.52642.9.63.1.5.1.1.4 | ColumnmaxMacAddressNumCapability | read-only | mandatory | Capability of mac address learning limitation. |
| 1.3.6.1.4.1.52642.9.63.1.5.2 | TableportSecurityStaticMacAddressTable | not-accessible | mandatory | A list of interface security static MAC address entries. |
| 1.3.6.1.4.1.52642.9.63.1.5.2.1 | RowportSecurityStaticMacAddressEntry | not-accessible | mandatory | An interface security static mac address entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.5.2.1.1 | ColumnifSecurityStaticMacAddrIndex | read-only | mandatory | Indexs of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.52642.9.63.1.5.2.1.2 | ColumnifMacAddress | read-write | mandatory | Indexs of interface. Static mac address of port security. |
| 1.3.6.1.4.1.52642.9.63.1.5.2.1.3 | Columnoperation | read-write | mandatory | The operation of static mac address. 1-add, 2-delete. |
| 1.3.6.1.4.1.52642.9.63.1.5.3 | TableportSecurityBindBlockTable | not-accessible | mandatory | A list of interface security binding block entries. |
| 1.3.6.1.4.1.52642.9.63.1.5.3.1 | RowportSecurityBindBlockEntry | not-accessible | mandatory | An interface security binding block entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.5.3.1.1 | ColumnifSecurityBindBlockIndex | read-only | mandatory | Indexs of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.52642.9.63.1.5.3.1.2 | ColumnifBindBlockMacAddress | read-write | mandatory | Indexs of interface. MAC address. If not care mac address, the value should be set to FFFFFF. |
| 1.3.6.1.4.1.52642.9.63.1.5.3.1.3 | ColumnifBindBlockIPAddress | read-write | mandatory | Indexs of interface. Ip address. If not care ip address, the value should be set to 255.255.255.255 . |
| 1.3.6.1.4.1.52642.9.63.1.5.3.1.4 | ColumnifBindBlockIPV6Address | read-write | mandatory | Indexs of interface. Ipv6 address. If not care ipv6 address, all bit value should be set to 1. |
| 1.3.6.1.4.1.52642.9.63.1.5.3.1.5 | Columnmode | read-write | mandatory | The config mode.0:del,1:bind mac,2:bind ip,3:bind arp,4:bind arp ip,5:bind ip mac,6:bind arp mac, 7:bind arp ip mac,8:bind ipv6,9:bind ipv6 mac,10:block mac,11… |
| 1.3.6.1.4.1.52642.9.63.1.5.4 | TablevlanSecurityTable | not-accessible | mandatory | A list of VLAN security entries. |
| 1.3.6.1.4.1.52642.9.63.1.5.4.1 | RowvlanSecurityEntry | not-accessible | mandatory | An interface VLAN security entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.5.4.1.1 | ColumnsecurityVlanID | read-only | mandatory | VlanID to config. The range is 1-4094 |
| 1.3.6.1.4.1.52642.9.63.1.5.4.1.2 | ColumndynamicMacAddress | read-write | mandatory | The max number of mac address to be learned. The range is 1-32768. 0 means disable. Default is disable. |
| 1.3.6.1.4.1.52642.9.63.1.6 | NodeifProtect | |||
| 1.3.6.1.4.1.52642.9.63.1.6.1 | TableportProtectGroupTable | not-accessible | mandatory | A list of port Protect Group entries. |
| 1.3.6.1.4.1.52642.9.63.1.6.1.1 | RowportProtectGroupEntry | not-accessible | mandatory | An interface port Protect Group entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.6.1.1.1 | ColumngroupID | read-write | mandatory | The groupID of port protect. The range is 1-32. |
| 1.3.6.1.4.1.52642.9.63.1.6.1.1.2 | ColumnifProtectGroupOperation | read-write | mandatory | The operation of group. 1-add, 2-delete. |
| 1.3.6.1.4.1.52642.9.63.1.6.2 | TableportProtectAppTable | not-accessible | mandatory | A list of port Protect Application entries. |
| 1.3.6.1.4.1.52642.9.63.1.6.2.1 | RowportProtectAppEntry | not-accessible | mandatory | An interface port Protect Application entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.52642.9.63.1.6.2.1.1 | ColumnifProtectAppIndex | read-only | mandatory | Indexs of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.52642.9.63.1.6.2.1.2 | ColumnifGroupIDApp | read-write | mandatory | The groupID of port protect. The range is 1-32. The same value as groupID in portProtectGroupEntry. |