MIB Viewer

FS-NMS-LLDP-MIB

117 objects
No module-level DESCRIPTION found.
Imported Objects
FS-NMS-SMInms
IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.52642.127IdentitynmslldpMIB
1.3.6.1.4.1.52642.127.0NodelldpNotifications
1.3.6.1.4.1.52642.127.0.0NodelldpNotificationPrefix
1.3.6.1.4.1.52642.127.0.0.1NotificationlldpRemTablesChangecurrentA lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote syste…
1.3.6.1.4.1.52642.127.1NodelldpObjects
1.3.6.1.4.1.52642.127.1.1NodelldpConfiguration
1.3.6.1.4.1.52642.127.1.1.1ScalarlldpMessageTxIntervalread-writecurrentThe interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpMessageTxInterval object is 30 seconds. The value of …
1.3.6.1.4.1.52642.127.1.1.2ScalarlldpMessageTxHoldMultiplierread-writecurrentThe time-to-live value expressed as a multiple of the lldpMessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf of…
1.3.6.1.4.1.52642.127.1.1.3ScalarlldpReinitDelayread-writecurrentThe lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initi…
1.3.6.1.4.1.52642.127.1.1.4ScalarlldpTxDelayread-writecurrentThe lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local syste…
1.3.6.1.4.1.52642.127.1.1.5ScalarlldpNotificationIntervalread-writecurrentThis object controls the transmission of LLDP notifications. the agent must not generate more than one lldpRemTablesChange notification-event in the indicated …
1.3.6.1.4.1.52642.127.1.1.6TablelldpPortConfigTablenot-accessiblecurrentThe table that controls LLDP frame transmission on individual ports.
1.3.6.1.4.1.52642.127.1.1.6.1RowlldpPortConfigEntrynot-accessiblecurrentLLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports wh…
1.3.6.1.4.1.52642.127.1.1.6.1.1ColumnlldpPortConfigPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i…
1.3.6.1.4.1.52642.127.1.1.6.1.2ColumnlldpPortConfigAdminStatusread-writecurrentThe administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent wil…
1.3.6.1.4.1.52642.127.1.1.6.1.3ColumnlldpPortConfigNotificationEnableread-writecurrentThe lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notif…
1.3.6.1.4.1.52642.127.1.1.6.1.4ColumnlldpPortConfigTLVsTxEnableread-writecurrentThe lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network m…
1.3.6.1.4.1.52642.127.1.1.7TablelldpConfigManAddrTablenot-accessiblecurrentThe table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.
1.3.6.1.4.1.52642.127.1.1.7.1RowlldpConfigManAddrEntrynot-accessiblecurrentLLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transm…
1.3.6.1.4.1.52642.127.1.1.7.1.1ColumnlldpConfigManAddrPortsTxEnableread-writecurrentA set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will b…
1.3.6.1.4.1.52642.127.1.2NodelldpStatistics
1.3.6.1.4.1.52642.127.1.2.1ScalarlldpStatsRemTablesLastChangeTimeread-onlycurrentThe value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteS…
1.3.6.1.4.1.52642.127.1.2.2ScalarlldpStatsRemTablesInsertsread-onlycurrentThe number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpEx…
1.3.6.1.4.1.52642.127.1.2.3ScalarlldpStatsRemTablesDeletesread-onlycurrentThe number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExt…
1.3.6.1.4.1.52642.127.1.2.4ScalarlldpStatsRemTablesDropsread-onlycurrentThe number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lld…
1.3.6.1.4.1.52642.127.1.2.5ScalarlldpStatsRemTablesAgeoutsread-onlycurrentThe number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExt…
1.3.6.1.4.1.52642.127.1.2.6TablelldpStatsTxPortTablenot-accessiblecurrentA table containing LLDP transmission statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is e…
1.3.6.1.4.1.52642.127.1.2.6.1RowlldpStatsTxPortEntrynot-accessiblecurrentLLDP frame transmission statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular …
1.3.6.1.4.1.52642.127.1.2.6.1.1ColumnlldpStatsTxPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i…
1.3.6.1.4.1.52642.127.1.2.6.1.2ColumnlldpStatsTxPortFramesTotalread-onlycurrentThe number of LLDP frames transmitted by this LLDP agent on the indicated port.
1.3.6.1.4.1.52642.127.1.2.7TablelldpStatsRxPortTablenot-accessiblecurrentA table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equa…
1.3.6.1.4.1.52642.127.1.2.7.1RowlldpStatsRxPortEntrynot-accessiblecurrentLLDP frame reception statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular ent…
1.3.6.1.4.1.52642.127.1.2.7.1.1ColumnlldpStatsRxPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i…
1.3.6.1.4.1.52642.127.1.2.7.1.2ColumnlldpStatsRxPortFramesDiscardedTotalread-onlycurrentThe number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLD…
1.3.6.1.4.1.52642.127.1.2.7.1.3ColumnlldpStatsRxPortFramesErrorsread-onlycurrentThe number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
1.3.6.1.4.1.52642.127.1.2.7.1.4ColumnlldpStatsRxPortFramesTotalread-onlycurrentThe number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
1.3.6.1.4.1.52642.127.1.2.7.1.5ColumnlldpStatsRxPortTLVsDiscardedTotalread-onlycurrentThe number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.
1.3.6.1.4.1.52642.127.1.2.7.1.6ColumnlldpStatsRxPortTLVsUnrecognizedTotalread-onlycurrentThe number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the …
1.3.6.1.4.1.52642.127.1.2.7.1.7ColumnlldpStatsRxPortAgeoutsTotalread-onlycurrentThe counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised …
1.3.6.1.4.1.52642.127.1.3NodelldpLocalSystemData
1.3.6.1.4.1.52642.127.1.3.1ScalarlldpLocChassisIdSubtyperead-onlycurrentThe type of encoding used to identify the chassis associated with the local system.
1.3.6.1.4.1.52642.127.1.3.2ScalarlldpLocChassisIdread-onlycurrentThe string value used to identify the chassis component associated with the local system.
1.3.6.1.4.1.52642.127.1.3.3ScalarlldpLocSysNameread-onlycurrentThe string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same va…
1.3.6.1.4.1.52642.127.1.3.4ScalarlldpLocSysDescread-onlycurrentThe string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the …
1.3.6.1.4.1.52642.127.1.3.5ScalarlldpLocSysCapSupportedread-onlycurrentThe bitmap value used to identify which system capabilities are supported on the local system.
1.3.6.1.4.1.52642.127.1.3.6ScalarlldpLocSysCapEnabledread-onlycurrentThe bitmap value used to identify which system capabilities are enabled on the local system.
1.3.6.1.4.1.52642.127.1.3.7TablelldpLocPortTablenot-accessiblecurrentThis table contains one or more rows per port information associated with the local system known to this agent.
1.3.6.1.4.1.52642.127.1.3.7.1RowlldpLocPortEntrynot-accessiblecurrentInformation about a particular port component. Entries may be created and deleted in this table by the agent.
1.3.6.1.4.1.52642.127.1.3.7.1.1ColumnlldpLocPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i…
1.3.6.1.4.1.52642.127.1.3.7.1.2ColumnlldpLocPortIdSubtyperead-onlycurrentThe type of port identifier encoding used in the associated 'lldpLocPortId' object.
1.3.6.1.4.1.52642.127.1.3.7.1.3ColumnlldpLocPortIdread-onlycurrentThe string value used to identify the port component associated with a given port in the local system.
1.3.6.1.4.1.52642.127.1.3.7.1.4ColumnlldpLocPortDescread-onlycurrentThe string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPo…
1.3.6.1.4.1.52642.127.1.3.8TablelldpLocManAddrTablenot-accessiblecurrentThis table contains management address information on the local system known to this agent.
1.3.6.1.4.1.52642.127.1.3.8.1RowlldpLocManAddrEntrynot-accessiblecurrentManagement address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a partic…
1.3.6.1.4.1.52642.127.1.3.8.1.1ColumnlldpLocManAddrSubtypenot-accessiblecurrentThe type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.
1.3.6.1.4.1.52642.127.1.3.8.1.2ColumnlldpLocManAddrnot-accessiblecurrentThe string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management e…
1.3.6.1.4.1.52642.127.1.3.8.1.3ColumnlldpLocManAddrLenread-onlycurrentThe total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address len…
1.3.6.1.4.1.52642.127.1.3.8.1.4ColumnlldpLocManAddrIfSubtyperead-onlycurrentThe enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.
1.3.6.1.4.1.52642.127.1.3.8.1.5ColumnlldpLocManAddrIfIdread-onlycurrentThe integer value used to identify the interface number regarding the management address component associated with the local system.
1.3.6.1.4.1.52642.127.1.3.8.1.6ColumnlldpLocManAddrOIDread-onlycurrentThe OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.
1.3.6.1.4.1.52642.127.1.4NodelldpExtens
1.3.6.1.4.1.52642.127.1.4NodelldpRemoteSystemsData
1.3.6.1.4.1.52642.127.1.4.1TablelldpRemTablenot-accessiblecurrentThis table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present fo…
1.3.6.1.4.1.52642.127.1.4.1.1RowlldpRemEntrynot-accessiblecurrentInformation about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery pro…
1.3.6.1.4.1.52642.127.1.4.1.1.1ColumnlldpRemTimeMarknot-accessiblecurrentA TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to …
1.3.6.1.4.1.52642.127.1.4.1.1.2ColumnlldpRemLocalPortNumnot-accessiblecurrentThe index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum id…
1.3.6.1.4.1.52642.127.1.4.1.1.3ColumnlldpRemIndexnot-accessiblecurrentThis object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote s…
1.3.6.1.4.1.52642.127.1.4.1.1.4ColumnlldpRemChassisIdSubtyperead-onlycurrentThe type of encoding used to identify the chassis associated with the remote system.
1.3.6.1.4.1.52642.127.1.4.1.1.5ColumnlldpRemChassisIdread-onlycurrentThe string value used to identify the chassis component associated with the remote system.
1.3.6.1.4.1.52642.127.1.4.1.1.6ColumnlldpRemPortIdSubtyperead-onlycurrentThe type of port identifier encoding used in the associated 'lldpRemPortId' object.
1.3.6.1.4.1.52642.127.1.4.1.1.7ColumnlldpRemPortIdread-onlycurrentThe string value used to identify the port component associated with the remote system.
1.3.6.1.4.1.52642.127.1.4.1.1.8ColumnlldpRemPortDescread-onlycurrentThe string value used to identify the description of the given port associated with the remote system.
1.3.6.1.4.1.52642.127.1.4.1.1.9ColumnlldpRemSysNameread-onlycurrentThe string value used to identify the system name of the remote system.
1.3.6.1.4.1.52642.127.1.4.1.1.10ColumnlldpRemSysDescread-onlycurrentThe string value used to identify the system description of the remote system.
1.3.6.1.4.1.52642.127.1.4.1.1.11ColumnlldpRemSysCapSupportedread-onlycurrentThe bitmap value used to identify which system capabilities are supported on the remote system.
1.3.6.1.4.1.52642.127.1.4.1.1.12ColumnlldpRemSysCapEnabledread-onlycurrentThe bitmap value used to identify which system capabilities are enabled on the remote system.
1.3.6.1.4.1.52642.127.1.4.2TablelldpRemManAddrTablenot-accessiblecurrentThis table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known …
1.3.6.1.4.1.52642.127.1.4.2.1RowlldpRemManAddrEntrynot-accessiblecurrentManagement address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a…
1.3.6.1.4.1.52642.127.1.4.2.1.1ColumnlldpRemManAddrSubtypenot-accessiblecurrentThe type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object.
1.3.6.1.4.1.52642.127.1.4.2.1.2ColumnlldpRemManAddrnot-accessiblecurrentThe string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management …
1.3.6.1.4.1.52642.127.1.4.2.1.3ColumnlldpRemManAddrIfSubtyperead-onlycurrentThe enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.
1.3.6.1.4.1.52642.127.1.4.2.1.4ColumnlldpRemManAddrIfIdread-onlycurrentThe integer value used to identify the interface number regarding the management address component associated with the remote system.
1.3.6.1.4.1.52642.127.1.4.2.1.5ColumnlldpRemManAddrOIDread-onlycurrentThe OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.
1.3.6.1.4.1.52642.127.1.4.3TablelldpRemUnknownTLVTablenot-accessiblecurrentThis table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic man…
1.3.6.1.4.1.52642.127.1.4.3.1RowlldpRemUnknownTLVEntrynot-accessiblecurrentInformation about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical…
1.3.6.1.4.1.52642.127.1.4.3.1.1ColumnlldpRemUnknownTLVTypenot-accessiblecurrentThis object represents the value extracted from the type field of the TLV.
1.3.6.1.4.1.52642.127.1.4.3.1.2ColumnlldpRemUnknownTLVInforead-onlycurrentThis object represents the value extracted from the value field of the TLV.
1.3.6.1.4.1.52642.127.1.4.4TablelldpRemOrgDefInfoTablenot-accessiblecurrentThis table contains one or more rows per physical network connection which advertises the organizationally defined information. Note that this table contains o…
1.3.6.1.4.1.52642.127.1.4.4.1RowlldpRemOrgDefInfoEntrynot-accessiblecurrentInformation about the unrecognized organizationally defined information advertised by the remote system. The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex…
1.3.6.1.4.1.52642.127.1.4.4.1.1ColumnlldpRemOrgDefInfoOUInot-accessiblecurrentThe Organizationally Unique Identifier (OUI), as defined in IEEE std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various…
1.3.6.1.4.1.52642.127.1.4.4.1.2ColumnlldpRemOrgDefInfoSubtypenot-accessiblecurrentThe integer value used to identify the subtype of the organizationally defined information received from the remote system. The subtype value is required to id…
1.3.6.1.4.1.52642.127.1.4.4.1.3ColumnlldpRemOrgDefInfoIndexnot-accessiblecurrentThis object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance,…
1.3.6.1.4.1.52642.127.1.4.4.1.4ColumnlldpRemOrgDefInforead-onlycurrentThe string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdmi…
1.3.6.1.4.1.52642.127.1.5NodelldpExtensions
1.3.6.1.4.1.52642.127.2NodelldpConformance
1.3.6.1.4.1.52642.127.2.1NodelldpCompliances
1.3.6.1.4.1.52642.127.2.1.1CompliancelldpCompliancecurrentThe compliance statement for SNMP entities which implement the LLDP MIB.
1.3.6.1.4.1.52642.127.2.2NodelldpGroups
1.3.6.1.4.1.52642.127.2.2.1GrouplldpConfigGroupcurrentThe collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP.
1.3.6.1.4.1.52642.127.2.2.2GrouplldpConfigRxGroupcurrentThe collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have th…
1.3.6.1.4.1.52642.127.2.2.3GrouplldpConfigTxGroupcurrentThe collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have th…
1.3.6.1.4.1.52642.127.2.2.4GrouplldpStatsRxGroupcurrentThe collection of objects which are used to represent LLDP reception statistics. This group is mandatory for agents which implement the LLDP and have the capab…
1.3.6.1.4.1.52642.127.2.2.5GrouplldpStatsTxGroupcurrentThe collection of objects which are used to represent LLDP transmission statistics. This group is mandatory for agents which implement the LLDP and have the ca…
1.3.6.1.4.1.52642.127.2.2.6GrouplldpLocSysGroupcurrentThe collection of objects which are used to represent LLDP Local System Information. This group is mandatory for agents which implement the LLDP and have the c…
1.3.6.1.4.1.52642.127.2.2.7GrouplldpRemSysGroupcurrentThe collection of objects which are used to represent LLDP Remote Systems Information. The objects represent the information associated with the basic TLV set.…
1.3.6.1.4.1.52642.127.2.2.8GrouplldpNotificationsGroupcurrentThe collection of notifications used to indicate LLDP MIB data consistency and general status information. This group is mandatory for agents which implement t…
Type Definitions
NameSyntaxStatusDescription
LldpChassisIdOCTET STRING (SIZE (1..255))currentThis TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instan…
LldpChassisIdSubtypeINTEGER { chassisComponent(1), interfaceAlias(2), portComponent(3), macAddress(4), networkAddress(5), interfaceName(6), local(7) }currentThis TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis componen…
LldpManAddressOCTET STRING (SIZE (1..31))currentThe value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such …
LldpManAddrIfSubtypeINTEGER { unknown(1), ifIndex(2), systemPortNumber(3) }currentThis TC describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. The enumeration 'ifIndex(2)' repre…
LldpPortIdOCTET STRING (SIZE (1..255))currentThis TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th…
LldpPortIdSubtypeINTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) }currentThis TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The …
LldpPortListOCTET STRING(SIZE(0..512))currentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
LldpPortNumberInteger32(1..4096)currentEach port contained in the chassis (that is known to the LLDP agent) is uniquely identified by a port number. A port number has no mandatory relationship to an InterfaceIndex object (of the interfaces MIB, IETF RFC 2863…
LldpSystemCapabilitiesMapBITS { other(0), repeater(1), bridge(2), wlanAccessPoint(3), router(4), telephone(5), docsisCableDevice(6), stationOnly(7) }currentThis TC describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. The bit 'b…
TimeFilterTimeTickscurrent
ZeroBasedCounter32Gauge32currentThis TC describes an object which counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value…