FS-RSTP-MSTP-MIB
81 objects
This module defines fs stp mibs.
Imported Objects
| BRIDGE-MIB | BridgeId |
| FS-SMI | fsMgmt |
| FS-TC | ConfigStatus IfIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.16 | IdentityfsStpMIB | This module defines fs stp mibs. | ||
| 1.3.6.1.4.1.52642.1.1.10.2.16.1 | NodefsStpMIBObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.1 | ScalarfsSysStpStatus | read-write | current | This object allow of enabling or disabling the Spanning Tree Protocol in the system, this will avoid the circle exist in the net environment, then avoid the br… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.2 | ScalarfsSysStpReset | read-write | current | This object allow of resetting all Spanning Tree Protocol parameter reset to default settings. set its value to any but 0, will cause agent reset the parameter… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.3 | TablefsStpExtPortTable | not-accessible | current | A table that contains port-specific Spanning Tree extend information. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.3.1 | RowfsStpExtPortEntry | not-accessible | current | A list of Spanning Tree extend information maintained by each port. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.3.1.1 | ColumnfsStpPortIfIndex | read-only | current | include only physical port and trunk port |
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.3.1.2 | ColumnfsStpPortAdminPathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.3.1.3 | ColumnfsStpPortOperPathCost | read-only | current | Actual oper value of port cost. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.1.3.1.4 | ColumnfsStpPortRole | read-only | current | Actual role of port in stp. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2 | NodefsRstpMIBObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.1 | ScalarfsStpVersion | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.2 | ScalarfsStpTxHoldCount | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.3 | ScalarfsStpPathCostDefault | read-write | current | The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE St… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4 | TablefsRstpExtPortTable | not-accessible | current | A table that contains port-specific Rapid Spanning Tree information. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1 | RowfsRstpExtPortEntry | not-accessible | current | A list of Rapid Spanning Tree information maintained by each port. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.1 | ColumnfsRstpExtPortIfIndex | read-only | current | include only physical port and trunk port |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.2 | ColumnfsStpPortProtocolMigration | read-write | current | When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.3 | ColumnfsStpPortAdminEdgePort | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.4 | ColumnfsStpPortOperEdgePort | read-only | current | The operational value of the Edge Port parameter. The object is initialized to the value of fsStpPortAdminEdgePort and is set FALSE on reception of a BPDU. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.5 | ColumnfsStpPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.6 | ColumnfsStpPortOperPointToPoint | read-only | current | The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection o… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.7 | ColumnfsStpPortBpduGuard | read-write | current | The BPDU guard feature provides a secure response to invalid configurations because you must manually put the port back in service. Use the BPDU guard feature … |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.4.1.8 | ColumnfsStpPortBpduFilter | read-write | current | It will prevent the port from sending or receiving BPDUs if you enable BPDU filter feature of this port. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.5 | ScalarfsStpBpduGuard | read-write | current | If you enable Global BPDU guard feature ,ports which is EdgePort will is put in the error-disabled state When thest ports receives a BPDU. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.6 | ScalarfsStpBpduFilter | read-write | current | If you enable Global BPDU filter feature ,ports which is EdgePort will be prevented the port from sending or receiving BPDUs. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.7 | ScalarfsStpCistRegionRoot | read-only | current | The Bridge Identifier of the current CIST Regional Root. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.2.8 | ScalarfsStpCistPathCost | read-only | current | The CIST path cost from the transmitting Bridge to the CIST Regional Root.. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3 | NodefsMstpMIBObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.1 | ScalarfsStpMstiMaxInstanceNumber | read-only | current | The maximum MST (Multiple Spanning Tree) instance id, that are supported by the device for the MST Protocol. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.2 | ScalarfsStpMstiRegionName | read-write | current | The operational MST region name. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.3 | ScalarfsStpMstiRegionRevision | read-write | current | The operational MST region version. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.4 | ScalarfsStpMstiMaxHopNumber | read-write | current | The operational MST region max hop number. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5 | TablefsStpMstiInstanceTable | not-accessible | current | This table contains MST instance information with one entry for each MST instance numbered from 0 to fsStpxMSTMaxInstanceNumber. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1 | RowfsStpMstiInstanceEntry | not-accessible | current | A conceptual row containing the MST instance information. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.1 | ColumnfsStpMstiInstanceIndex | read-only | current | An integer that uniquely identifies an MST instance from 0 to the object value of fsStpMstiMaxInstanceNumber. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.2 | ColumnfsStpMstiInstanceVlansAddMapped | read-create | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.3 | ColumnfsStpMstiInstanceVlansDeleteMapped | read-create | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.4 | ColumnfsStpMstiInstanceVlansGetMapped | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.5 | ColumnfsStpMstiInstanceRemainingHopCount | read-only | current | The remaining hop count for this MST instance. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.6 | ColumnfsStpMstiPriority | read-create | current | The Bridge priority for the spanning tree instance identified by the MSTID. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.7 | ColumnfsStpMstiTimeSinceTopologyChange | read-only | current | Ccount in (in hundredths of a second) of the time elapsed since tcWhile (13.21) was last non-zero for any Port for the given MSTI. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.8 | ColumnfsStpMstiTopChanges | read-only | current | Count of the times tcWhile (13.21) has been non-zero for any Port for the given MSTI since the Bridge was powered on or initialized. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.9 | ColumnfsStpMstiDesignatedRoot | read-only | current | The Bridge Identifier of the Root Bridge for the spanning tree instance identified by the MSTID. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.10 | ColumnfsStpMstiRootCost | read-only | current | The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by the MSTID. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.11 | ColumnfsStpMstiRootPort | read-only | current | The Root Port for the spanning tree instance identified by the MSTID. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.5.1.12 | ColumnfsStpMstiInstanceEntryStatus | read-create | current | Status of this entry, set this object to valid will creat a entry, and set its value to invalid will delete this entry. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6 | TablefsStpPortMstiInstanceTable | not-accessible | current | This table contains MST instance information with one entry for each MST instance numbered from 0 to fsStpxMSTMaxInstanceNumber. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1 | RowfsStpPortMstiInstanceEntry | not-accessible | current | A conceptual row containing pthe MST instance information of a bridge port. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.1 | ColumnfsStpPortMstiIndex | not-accessible | current | The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.2 | ColumnfsStpPortMstiState | read-only | current | The current state of the Port. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.3 | ColumnfsStpPortMstiAdminPathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.4 | ColumnfsStpPortMstiOperPathCost | read-only | current | Actual oper value of port cost of msti. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.5 | ColumnfsStpPortMstiPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.6 | ColumnfsStpPortMstiDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.7 | ColumnfsStpPortMstiDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.8 | ColumnfsStpPortMstiDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.9 | ColumnfsStpPortMstiDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.10 | ColumnfsStpPortMstiPortRole | read-only | current | Actual role of port in msti. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.6.1.11 | ColumnfsStpPortMstiPortForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state in msti. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.7 | ScalarfsStpMstiReset | read-write | current | This object allow of resetting MST configuration parameter reset to default settings. set its value to any but 0, will cause agent reset the parameters, set it… |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.8 | ScalarfsStpCistVlansAddMapped | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.9 | ScalarfsStpCistVlansGetMapped | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.52642.1.1.10.2.16.3.10 | ScalarfsStpCistRemainingHopCount | read-only | current | The remaining hop count for CIST. |
| 1.3.6.1.4.1.52642.1.1.10.2.16.4 | NodestpExternConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.4.1 | NodestpExternGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.4.1.1 | GroupstpExternGroup | current | Spanning Tree extern information for the bridge. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.5 | NoderstpConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.5.1 | NoderstpGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.5.1.1 | GrouprstpBridgeGroup | current | Rapid Spanning Tree information for the bridge. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.5.1.2 | GrouprstpDefaultPathCostGroup | current | Default Spanning Tree path cost information. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.5.1.3 | GrouprstpPortGroup | current | Rapid Spanning Tree information for individual ports. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.5.2 | NoderstpCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.5.2.1 | CompliancerstpCompliance | current | The compliance statement for device support of bridging services. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.6 | NodemstpConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.6.1 | NodemstpGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.6.1.1 | GroupmstpBridgeRegionGroup | current | Msti information for the bridge. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.6.1.2 | GroupmstpMstiBridgeGroup | current | Default Spanning Tree path cost information. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.6.1.3 | GroupmstpMstiPortGroup | current | Rapid Spanning Tree information for individual ports. | |
| 1.3.6.1.4.1.52642.1.1.10.2.16.6.2 | NodemstpCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.16.6.2.1 | CompliancemstpCompliance | current | The compliance statement for device support of bridging services. |