FS-SYSTEM-MIB
249 objects
This module defines fs system mibs.
Imported Objects
| FS-AC-MGMT-MIB | fsApMacAddr |
| FS-MEMORY-MIB | fsMemoryPoolCurrentUtilization |
| FS-PROCESS-MIB | fsCPUUtilization1Min Percent |
| FS-SMI | fsMgmt |
| RFC1155-SMI | Gauge |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.1 | IdentityfsSystemMIB | This module defines fs system mibs. | ||
| 1.3.6.1.4.1.52642.1.1.10.2.1.1 | NodefsSystemMIBObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.1 | ScalarfsSystemHwVersion | read-only | current | Return the string of the Revision number of hardware resides on the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.2 | ScalarfsSystemSwVersion | read-only | current | Return the string of the Revision number of software resides on the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.3 | ScalarfsSystemBootVersion | read-only | current | Return the string of the Revision number of BOOT software resides on the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.4 | ScalarfsSystemSysCtrlVersion | read-only | current | Return the string of the Revision number of CTRL software resides on the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.5 | ScalarfsSystemParametersSave | read-write | current | Save all parameters changed in configuration by setting this object to any value but 0, set its value to 0 will cause no action of agent, otherwise all changes… |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.6 | ScalarfsSystemOutBandRate | read-write | current | Determine the console(OutBand) baud rate : 9600 - 1,19200 - 2, 38300 - 3, 57600 - 4, 115200 - 5, when the console baud rate is other value will return value 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.7 | ScalarfsSystemReset | read-write | current | This Object allow perform soft reset of system by setting its value to none zero. if a soft resetis performed, after this having completed a warm start trap wi… |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.8 | ScalarfsSwitchLayer | read-only | current | Which layer's device the switch in system |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.9 | ScalarfsSystemHwPower | read-only | current | The state of power. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.10 | ScalarfsSystemHwFan | read-only | current | The state of fan. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.11 | ScalarfsSystemOutBandTimeout | read-write | obsolete | The timeout of console.0 indicate that timeout function is disabled. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.12 | ScalarfsSystemTelnetTimeout | read-write | obsolete | The timeout of telnet.0 indicate that timeout function is disabled. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.13 | ScalarfsSystemMainFile | read-only | current | Return the string of the name of main file on the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.14 | ScalarfsSystemCurrentPower | read-only | current | Return the current power of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.15 | ScalarfsSystemRemainPower | read-only | current | Return the remain power of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.16 | ScalarfsSystemTemperature | read-only | current | Return the temperature of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.17 | ScalarfsSystemElectricalSourceNum | read-only | current | Return the electrical source number of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.18 | TablefsSystemElectricalSourceIsNormalTable | not-accessible | current | A table of electrical source entries. Each object displays whether different electrical sources are normal or not. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.18.1 | RowfsSystemElectricalSourceIsNormalEntry | not-accessible | current | An entry displays whether different electrical sources are normal or not. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.18.1.1 | ColumnfsSystemElectricalSourceIsNormalIndex | read-only | current | An index that uniquely represents a electrical source. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.18.1.2 | ColumnfsSystemElectricalSourceIsNormal | read-only | current | This object displays whether an electrical source is normal or not. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.18.1.3 | ColumnfsSystemElectricalSourceName | read-only | current | The name of electrical source |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.19 | ScalarfsSystemCurrentVoltage | read-only | current | Return the current voltage of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.20 | ScalarfsSystemFanNUM | read-only | current | Return the number of fan on the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.21 | TablefsSystemFanIsNormalTable | not-accessible | current | A table of fan entries. Each object displays whether different fans are normal or not. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.21.1 | RowfsSystemFanIsNormalEntry | not-accessible | current | An entry displays whether different fans are normal or not. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.21.1.1 | ColumnfsSystemFanIsNormalIndex | read-only | current | An index that uniquely represents a fan. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.21.1.2 | ColumnfsSystemFanIsNormal | read-only | current | This object displays whether an fan is normal or not. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.21.1.3 | ColumnfsSystemFanName | read-only | current | The name of fan |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.21.1.4 | ColumnfsSystemFanSpeed | read-only | current | This object displays the fan's speed. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.22 | ScalarfsSystemReloadTimeRemain | read-only | current | Return the remain time of reloading on the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.23 | TablefsSystemTemperatureTable | not-accessible | current | A table of temperature entries. Each object displays the temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.23.1 | RowfsSystemTemperatureEntry | not-accessible | current | An entry displays the temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.23.1.1 | ColumnfsSystemTemperatureIndex | read-only | current | An index that uniquely represents a device's temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.23.1.2 | ColumnfsSystemTemperatureName | read-only | current | A textual name assigned to a temperature chip |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.23.1.3 | ColumnfsSystemTemperatureCurrent | read-only | current | Return the current temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.23.1.4 | ColumnfsSystemTemperatureWarningVaule | read-write | current | The first warning of temperature of the device CPU. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.23.1.5 | ColumnfsSystemTemperatureCritialVaule | read-write | current | The second warning of temperature of the device CPU. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.24 | ScalarfsSystemSerialno | read-only | current | Return the string of the serial number resides on the FastSwitch. Or return the serial number resides on the current master engine of a chassis device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25 | TablefsSystemVersionTable | not-accessible | current | A table of system version entries. Each object displays the system version information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1 | RowfsSystemVersionEntry | not-accessible | current | An entry displays the system version information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1.1 | ColumnfsSystemVersionIndex | read-only | current | An index that uniquely represents a device's system version information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1.2 | ColumnfsSystemVersionName | read-only | current | A textual name assigned to a system version chip |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1.3 | ColumnfsSystemVersionSwBoot | read-only | current | Return the software boot system version of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1.4 | ColumnfsSystemVersionSwCtrl | read-only | current | Return the software ctrl system version of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1.5 | ColumnfsSystemVersionSwMain | read-only | current | Return the software main system version of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1.6 | ColumnfsSystemVersionHw | read-only | current | Return the hardware system version of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.25.1.7 | ColumnfsSystemVersionSerialno | read-only | current | Return the serial number of the FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.26 | ScalarfsSystemSysModel | read-only | current | Return the SysModel of equipment. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.27 | ScalarfsSystemUptime | read-only | current | Return the SysUptime of equipment,unit is seconds. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.28 | ScalarfsSystemSampleTime | read-write | current | Sampling duration. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.29 | ScalarfsSystemStatWindowTime | read-write | current | Stating duration. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.30 | ScalarfsSystemManufacturer | read-only | current | Return the string of the manufacturer. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.31 | ScalarfsSystemCurrentTime | read-write | current | Return the current time of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.32 | ScalarfsSystemWarnResendTime | read-write | current | Return the resending time of warn trap of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.33 | ScalarfsSystemSoftwareName | read-only | current | Return the software name of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.34 | ScalarfsSystemSoftwareManufacturer | read-only | current | Return the software manufacturer of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.35 | ScalarfsSystemCpuType | read-only | current | Return the cpu type infomation of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.36 | ScalarfsSystemMemoryType | read-only | current | Return the memory type of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.37 | ScalarfsSystemMemorySize | read-only | current | Return the memory card storage of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.38 | ScalarfsSystemFlashSize | read-only | current | Return the flash size of the system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39 | TablefsSystemLankApTable | not-accessible | current | A table of lank ap system entries. Each object displays the lank ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1 | RowfsSystemLankApEntry | not-accessible | current | An entry displays the lank ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.1 | ColumnfsSystemLankApMacAddr | read-only | current | An index that uniquely represents lank ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.2 | ColumnfsSystemLankApStatWindowTime | read-write | current | Stating duration of lank ap. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.3 | ColumnfsSystemLankApSampleTime | read-write | current | Sampling duration of lank ap. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.4 | ColumnfsSystemLankApReset | read-write | current | This Object allow perform soft reset of lank ap system by setting its value to none zero. if a soft resetis performed, after this having completed a warm start… |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.5 | ColumnfsSystemLankApSoftwareName | read-only | current | Return the software name of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.6 | ColumnfsSystemLankApSwVersion | read-only | current | Return the string of the Revision number of software resides on the lank ap FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.7 | ColumnfsSystemLankApSoftwareManufacturer | read-only | current | Return the software manufacturer of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.8 | ColumnfsSystemLankApCpuType | read-only | current | Return the cpu type infomation of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.9 | ColumnfsSystemLankApMemoryType | read-only | current | Return the memory type of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.10 | ColumnfsSystemLankApMemorySize | read-only | current | Return the memory card storage of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.11 | ColumnfsSystemLankAPFlashSize | read-only | current | Return the flash size of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.12 | ColumnfsSystemLankApManufacturer | read-only | current | Return the string of the manufacturer of lank ap. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.13 | ColumnfsSystemLankApSerialno | read-only | current | Return the string of the serial number resides on the lank ap FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.14 | ColumnfsSystemLankApSysModel | read-only | current | Return the SysModel of lank ap equipment. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.15 | ColumnfsSystemLankApUptime | read-only | current | Return the SysUptime of lank ap equipment. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.16 | ColumnfsSystemLankApAccurateUptime | read-only | current | Return the accurate system Uptime of ap equipment,unit is ticks |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.39.1.17 | ColumnfsSystemLankApHwVersion | read-only | current | Return the string of the Revision number of hardware resides on the lank ap FastSwitch. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.40 | TablefsSystemBoardTemperatureTable | not-accessible | current | A table of board temperature entries. Each object displays the board temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.40.1 | RowfsSystemBoardTemperatureEntry | not-accessible | current | An entry displays the board temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.40.1.1 | ColumnfsSystemBoardTemperatureIndex | read-only | current | An index that uniquely represents a device's board temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.40.1.2 | ColumnfsSystemBoardTemperatureName | read-only | current | A textual name assigned to a board temperature chip |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.40.1.3 | ColumnfsSystemBoardTemperatureCurrent | read-only | current | Return the current board temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41 | TablefsSystemElectricalInformationTable | not-accessible | current | A table of electrical entries. Each object displays the electrical information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1 | RowfsSystemElectricalInformationEntry | not-accessible | current | An entry displays the electrical information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.1 | ColumnfsSystemElectricalInformationDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.2 | ColumnfsSystemElectricalInformationIndex | read-only | current | An index that uniquely represents a electriacl. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.3 | ColumnfsSystemElectricalInformationStatus | read-only | current | This object displays whether an electrical source is normal or not. If the electrical is no exist, the other of electrical information maybe return nothing inf… |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.4 | ColumnfsSystemElectricalInformationType | read-only | current | This object displays the type of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.5 | ColumnfsSystemElectricalInformationAttribute | read-only | current | This object displays attribute of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.6 | ColumnfsSystemElectricalInformationSofeVersion | read-only | current | This object displays the sofe version of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.7 | ColumnfsSystemElectricalInformationHardwareVersion | read-only | current | This object displays the hardware version of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.8 | ColumnfsSystemElectricalInformationSerial | read-only | current | This object displays the serial of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.9 | ColumnfsSystemElectricalInformationProductionDate | read-only | current | This object displays the productiron date of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.10 | ColumnfsSystemElectricalInformationRatedPower | read-only | current | This object displays the rated power(Unit: W) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.11 | ColumnfsSystemElectricalInformationInVoltage | read-only | current | This object displays the input voltage(Unit: V) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.12 | ColumnfsSystemElectricalInformationInCurrent | read-only | current | This object displays the input current(Unit: mA) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.13 | ColumnfsSystemElectricalInformationOutVoltage | read-only | current | This object displays the output voltage(Unit: V) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.14 | ColumnfsSystemElectricalInformationOutCurrent | read-only | current | This object displays the output current(Unit: mA) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.15 | ColumnfsSystemElectricalInformationOutPower | read-only | current | This object displays the output power(Unit: W) of the electrical. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.16 | ColumnfsSystemElectricalInformationTemperature | read-only | current | This object displays the temperature(Unit: C) of the electrical. If the device is no support this information, This object will return -255. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.17 | ColumnfsSystemElectricalInformationAirflowCoexist | read-only | current | This object displays the airflow coexist of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.41.1.18 | ColumnfsSystemElectricalInformationWarningStatus | read-only | current | This object displays the warning status of the electrical. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42 | TablefsSystemFanInformationTable | not-accessible | current | A table of fan entries. Each object displays the fan information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1 | RowfsSystemFanInformationEntry | not-accessible | current | An entry displays the fan information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.1 | ColumnfsSystemFanInformationDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.2 | ColumnfsSystemFanInformationFanIndex | read-only | current | An index that uniquely represents a fan device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.3 | ColumnfsSystemFanInformationStatus | read-only | current | This object displays whether an fan device source is exist or not. If the fan device is no exist, the other of fan information maybe return nothing information… |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.4 | ColumnfsSystemFanInformationType | read-only | current | This object displays the type of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.5 | ColumnfsSystemFanInformationAttribute | read-only | current | This object displays attribute of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.6 | ColumnfsSystemFanInformationSofeVersion | read-only | current | This object displays the sofe version of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.7 | ColumnfsSystemFanInformationFirmwareVersion | read-only | current | This object displays the firmware version of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.8 | ColumnfsSystemFanInformationHardwareVersion | read-only | current | This object displays the hardware version of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.9 | ColumnfsSystemFanInformationSerial | read-only | current | This object displays the serial of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.10 | ColumnfsSystemFanInformationProductionDate | read-only | current | This object displays the productiron date of the fan. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.11 | ColumnfsSystemFanInformationTemperature | read-only | current | This object displays the temperature of the fan device. If the device is no support this information, This object will return -255. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.12 | ColumnfsSystemFanInformationNumber | read-only | current | This object displays the number of the fan device. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.13 | ColumnfsSystemFanInformationAirflowCoexist | read-only | current | This object displays the airflow coexist of the fan device. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.42.1.14 | ColumnfsSystemFanInformationWarningStatus | read-only | current | This object displays the warning status of the fan device. If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43 | TablefsSystemFanStatusTable | not-accessible | current | A table of fan status entries. Each object displays the fan status information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43.1 | RowfsSystemFanStatusEntry | not-accessible | current | An entry displays the fan status information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43.1.1 | ColumnfsSystemFanStatusDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43.1.2 | ColumnfsSystemFanStatusFanIndex | read-only | current | An index that uniquely represents a fan device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43.1.3 | ColumnfsSystemFanStatusIndex | read-only | current | An index that uniquely represents a fan. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43.1.4 | ColumnfsSystemFanStatus | read-only | current | This object displays whether an fan is normal or not. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43.1.5 | ColumnfsSystemFanStatusLevel | read-only | current | This object displays the level of the fan speed. If the device is no support this information, This object will return 0. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.43.1.6 | ColumnfsSystemFanStatusSpeed | read-only | current | This object displays fan speed(rpm). If the device is no support this information, This object will return nothing information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44 | TablefsSystemMultipleTemperatureTable | not-accessible | current | A table of multiple temperature entries. Each object displays the multiple temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1 | RowfsSystemMultipleTemperatureEntry | not-accessible | current | An entry displays the multiple temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1.1 | ColumnfsSystemMultipleTemperatureDeviceIndex | read-only | current | An index that uniquely represents a device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1.2 | ColumnfsSystemMultipleTemperatureSlotIndex | read-only | current | An index that uniquely represents a slot device. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1.3 | ColumnfsSystemMultipleTemperatureIndex | read-only | current | An index that uniquely represents a device's multiple temperature information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1.4 | ColumnfsSystemMultipleTemperatureName | read-only | current | A textual name assigned to a multiple temperature chip |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1.5 | ColumnfsSystemMultipleTemperatureCurrent | read-only | current | Return the current multiple temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to -255. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1.6 | ColumnfsSystemMultipleTemperatureWarning | read-write | current | Return the warning multiple temperature of the FastSwitch.The temperature display is not supported for the warning temperature returns to -255. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.44.1.7 | ColumnfsSystemMultipleTemperatureCritical | read-write | current | Return the critical multiple temperature of the FastSwitch.The temperature display is not supported for the critical temperature returns to -255. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.45 | ScalarfsSystemAccurateUptime | read-only | current | Return the accurate system Uptime of equipment,unit is ticks. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.46 | ScalarfsSystemPowerIndex | read-only | current | Index of power |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.47 | ScalarfsSystemSwitchID | read-only | current | Switch id in VSU |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48 | TablefsSystemApDeviceDescriptionTable | not-accessible | current | A table of lank ap system entries. Each object displays the lank ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1 | RowfsSystemApDeviceDescriptionEntry | not-accessible | current | An entry displays the ap Device Description. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.1 | ColumnfsSystemApDescMacAddr | read-only | current | An index that uniquely represents ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.2 | ColumnfsSystemApMemoryType | read-only | current | Return the memory type of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.3 | ColumnfsSystemApMemorySize | read-only | current | Return the memory card storage of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.4 | ColumnfsSystemAPFlashType | read-only | current | An index that uniquely represents ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.5 | ColumnfsSystemAPFlashSize | read-only | current | Return the flash size of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.6 | ColumnfsSystemApNVRAMSize | read-only | current | Return the NVRAM size of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.7 | ColumnfsSystemApCFSize | read-only | current | Return the CF size of the lank ap system, unit is MB. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.48.1.8 | ColumnfsSystemApCPUType | read-only | current | Return the cpu type of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49 | TablefsSystemApDeviceStatisticsTable | not-accessible | current | A table of lank ap system entries. Each object displays the lank ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1 | RowfsSystemApDeviceStatisticsEntry | not-accessible | current | An entry displays the ap Device Statistics. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.1 | ColumnfsSystemApStatMacAddr | read-only | current | An index that uniquely represents ap system information. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.2 | ColumnfsSystemApInterfaceNum | read-only | current | Return the interface number of the lank ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.3 | ColumnfsSystemApUptime | read-only | current | Return the SysUptime of lank ap equipment, unit is ticks. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.4 | ColumnfsSystemApCPUUtilizationCurrent | read-only | current | This is the collection of current lank ap cpu using rate. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.5 | ColumnfsSystemApCPUUtilizationAverage | read-only | current | This is the average cpu using rate currently. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.6 | ColumnfsSystemApMemoryPoolCurrentUtilization | read-only | current | This is the memory pool utilization currently. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.7 | ColumnfsSystemApMemoryPoolAverageUtilization | read-only | current | This is the average memory pool utilization currently. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.8 | ColumnfsSystemApFlashFreeSize | read-only | current | This is the free size of the flash device, unit is MB. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.49.1.9 | ColumnfsSystemAPDeviceTemperature | read-only | current | This is the temperature of the ap.But the ap is no support this information, so it will return 35 in perpetuity |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.50 | ScalarfsSystemUptimeMsLow | read-only | current | Return the equipment SysUptime Low 32-bit,unit is tick. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.51 | ScalarfsSystemUptimeMsHigh | read-only | current | Return the equipment SysUptime High 32-bit,unit is tick. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.52 | TablefsSystemFanSNTable | not-accessible | current | A table of fan's serial number |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.52.1 | RowfsSystemFanSNEntry | not-accessible | current | An entry displays fan SN. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.52.1.1 | ColumnfsSystemFanPadIndex | read-only | current | Return the index of the fan pad. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.52.1.2 | ColumnfsSystemFanPadName | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.52.1.3 | ColumnfsSystemFanPadSN | read-only | current | Return the SN of the fan pad. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.53 | TablefsSystemDsfSNTable | not-accessible | current | A table of dsf's serial number |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.53.1 | RowfsSystemDsfSNEntry | not-accessible | current | An entry displays dsf SN. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.53.1.1 | ColumnfsSystemDsfIndex | read-only | current | Return the index of the dsf. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.53.1.2 | ColumnfsSystemDsfName | read-only | current | Return the name of the dsf. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.53.1.3 | ColumnfsSystemDsfSN | read-only | current | Return the SN of the dsf. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.54 | TablefsSystemPowerSNTable | not-accessible | current | A table of power's serial number |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.54.1 | RowfsSystemPowerSNEntry | not-accessible | current | An entry displays power SN. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.54.1.1 | ColumnfsSystemPowerSNIndex | read-only | current | Return the index of the power. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.54.1.2 | ColumnfsSystemPowerSNName | read-only | current | Return the name of the power. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.54.1.3 | ColumnfsSystemPowerSN | read-only | current | Return the SN of the power. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55 | TablefsSystemFanPad1SpeedTable | not-accessible | current | A table of fan's speed on fan pad1. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1 | RowfsSystemFanPad1SpeedEntry | not-accessible | current | An entry displays fan's speed on same fan pad |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.1 | ColumnfsSystemOamFanPad1Index | read-only | current | Return the index of the fan pad. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.2 | ColumnfsSystemOamFanPad1Name | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.3 | ColumnfsSystemFanPad1Speed1 | read-only | current | Return the speed of the fan1. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.4 | ColumnfsSystemFanPad1Speed2 | read-only | current | Return the speed of the fan2. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.5 | ColumnfsSystemFanPad1Speed3 | read-only | current | Return the speed of the fan3. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.6 | ColumnfsSystemFanPad1Speed4 | read-only | current | Return the speed of the fan4. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.7 | ColumnfsSystemFanPad1Speed5 | read-only | current | Return the speed of the fan5. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.8 | ColumnfsSystemFanPad1Speed6 | read-only | current | Return the speed of the fan6. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.9 | ColumnfsSystemFanPad1Speed7 | read-only | current | Return the speed of the fan7. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.10 | ColumnfsSystemFanPad1Speed8 | read-only | current | Return the speed of the fan8. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.55.1.11 | ColumnfsSystemFanPad1Speed9 | read-only | current | Return the speed of the fan9. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.56 | TablefsSystemFanPad2SpeedTable | not-accessible | current | A table of fan's speed on fan pad2. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.56.1 | RowfsSystemFanPad2SpeedEntry | not-accessible | current | An entry displays fan's speed on same fan pad2 |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.56.1.1 | ColumnfsSystemOamFanPad2Index | read-only | current | Return the index of the fan pad2. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.56.1.2 | ColumnfsSystemOamFanPad2Name | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.56.1.3 | ColumnfsSystemFanPad2Speed1 | read-only | current | Return the speed of the fan1. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.56.1.4 | ColumnfsSystemFanPad2Speed2 | read-only | current | Return the speed of the fan2. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.56.1.5 | ColumnfsSystemFanPad2Speed3 | read-only | current | Return the speed of the fan3. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57 | TablefsSystemFanPad3SpeedTable | not-accessible | current | A table of fan's speed on fan pad3. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1 | RowfsSystemFanPad3SpeedEntry | not-accessible | current | An entry displays fan's speed on same fan pad3 |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1.1 | ColumnfsSystemOamFanPad3Index | read-only | current | Return the index of the fan pad3. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1.2 | ColumnfsSystemOamFanPad3Name | read-only | current | Return the name of the fan pad. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1.3 | ColumnfsSystemFanPad3Speed1 | read-only | current | Return the speed of the fan1. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1.4 | ColumnfsSystemFanPad3Speed2 | read-only | current | Return the speed of the fan2. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1.5 | ColumnfsSystemFanPad3Speed3 | read-only | current | Return the speed of the fan3. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1.6 | ColumnfsSystemFanPad3Speed4 | read-only | current | Return the speed of the fan4. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.57.1.7 | ColumnfsSystemFanPad3Speed5 | read-only | current | Return the speed of the fan5. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.58 | ScalarfsSystemParamSaveErrIdx | read-only | current | Param Save Err Idx. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.1.59 | ScalarfsSystemParamSaveErrMsg | read-only | current | Param Save Err Msg. |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2 | NodefsSystemMIBTraps | |||
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.1 | ScalarfsSystemHardChangeDesc | accessible-for-notify | current | The description of hard change |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.2 | NotificationfsSystemHardChangeDetected | current | System hardware has changed include number of devices or number of modules or the place or type of the module is change. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.3 | NotificationfsSystemPowerStateChange | current | while the state of power changed, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.4 | NotificationfsSystemFanStateChange | current | while the state of fan changed, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.5 | NotificationfsSystemCPUusageTooHighTrap | current | CPU usage Too High warning. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.6 | NotificationfsSystemCPUusageTooHighRecovTrap | current | clear the warning of CPU usage too high and report the current CPU usage. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.7 | NotificationfsSystemTmpTooHighTrap | current | Temperature Too High warning. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.8 | NotificationfsSystemTmpTooHighRecovTrap | current | clear the warning of temperature too high and report the current temperature. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.9 | NotificationfsSystemMemusageTooHighTrap | current | Memory usage too high warning. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.10 | NotificationfsSystemMemusageTooHighRecovTrap | current | clear the warning of Memory usage too high and report the current Memory usage. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.11 | NotificationfsSystemLankApCPUusageTooHighTrap | current | lank ap CPU usage Too High warning. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.12 | NotificationfsSystemLankApCPUusageTooHighRecovTrap | current | clear the warning of lank ap CPU usage too high and report the current CPU usage. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.13 | NotificationfsSystemLankApMemusageTooHighTrap | current | lank ap Memory usage too high warning. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.14 | NotificationfsSystemLankApMemusageTooHighRecovTrap | current | clear the warning of lank ap Memory usage too high and report the current Memory usage. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.15 | NotificationfsSystemResetTrap | current | send a trap while system reset | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.16 | NotificationfsSystemLankApResetTrap | current | send a trap while lank ap system reset | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.17 | NotificationfsSystemPowerOnTrap | current | send a trap while power on. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.18 | NotificationfsSystemPowerOffTrap | current | send a trap while power off. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.19 | NotificationfsSystemPowerOnTrapInVSU | current | send a trap while power on in VSU. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.20 | NotificationfsSystemPowerOffTrapInVSU | current | send a trap while power off in VSU. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.21 | NotificationfsSystemTmpTableTooHighTrap | current | Temperature Too High warning with the slot index. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.22 | NotificationfsSystemTmpTableTooHighRecovTrap | current | clear the warning of Temperature too high with the slot index. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.23 | NotificationfsSystemTmpTableTooHighTrapVSU | current | Temperature Too High warning with the slot index in VSU. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.24 | NotificationfsSystemTmpTableTooHighRecovTrapVSU | current | clear the warning of Temperature too high with the slot index. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.25 | NotificationfsSystemFanTableStateChange | current | while the state of fan changed, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.26 | NotificationfsSystemFanTableStateChangeVSU | current | In VSU, while the state of fan changed, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.27 | NotificationfsSystemParamSaveErr | current | while call exec write, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.28 | NotificationfsSystemFanTableOn | current | while fan is turned on, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.29 | NotificationfsSystemFanTableOff | current | while fan is turned off, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.30 | NotificationfsSystemFanTableOnVSU | current | In VSU, while fan is turned on, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.2.31 | NotificationfsSystemFanTableOffVSU | current | In VSU, while fan is turned off, then this trap will be sent. | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.3 | NodefsSystemMIBConformance | |||
| 1.3.6.1.4.1.52642.1.1.10.2.1.3.1 | NodefsSystemMIBCompliances | |||
| 1.3.6.1.4.1.52642.1.1.10.2.1.3.1.1 | CompliancefsSystemMIBCompliance | current | The compliance statement for entities which implement the FS System MIB | |
| 1.3.6.1.4.1.52642.1.1.10.2.1.3.2 | NodefsSystemMIBGroups | |||
| 1.3.6.1.4.1.52642.1.1.10.2.1.3.2.1 | GroupfsSystemMIBGroup | current | A collection of objects providing system information and opertion to a FS agent. |