FS-WLAN-FAT-AP-CF-MIB
517 objects
Wlan software private MIB for FS SNC according to the China Mobile standard. This is device manage MIB.
Imported Objects
| FS-AC-MGMT-MIB | fsApgWlanId |
| FS-SMI | fsMgmt |
| IANAifType-MIB | IANAifType |
| RFC1155-SMI | Gauge |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.80 | IdentityapStandardmibmodule | Wlan software private MIB for FS SNC according to the China Mobile standard. This is device manage MIB. | ||
| 1.3.6.1.4.1.52642.1.1.10.2.80.0 | NodeapStandardSysTraps | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.1 | NotificationapConfigurationErrorTrap | current | This trap will be sent when the config file is wrong. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.2 | NotificationapCPUusageTooHighTrap | current | This trap will be sent when the CPU usage is too high. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.3 | NotificationapCPUusageTooHighRecovTrap | current | This trap is used to clear CPU high usage traps. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.4 | NotificationapMemUsageTooHighTrap | current | This trap will be sent when memory usage is too high. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.5 | NotificationapMemUsageTooHighRecovTrap | current | This trap will be used to clear high memory usage trap. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.6 | NotificationapSystmColdStartTrap | current | This trap will be sent when the AP cold start. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.7 | NotificationapIPAddrChangeTrap | current | This trap will be sent when the AP address changes. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.8 | NotificationapAPMtWorkModeChgTrap | current | This trap will be sent when the AP radio monitor working mode changes. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.9 | NotificationapAPSWUpdateFailTrap | current | This trap will be sent when the AP software update failed. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.10 | NotificationapSSIDkeyConflictTrap | current | This trap will be sent when the SSID key conflict. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.0.11 | NotificationapFatAPHeartbeatTrap | current | This trap will be sent when a heartbeat periode pass. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1 | NodeapStandardSysTrapsObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.1 | ScalarapOriginalIpAddr | read-only | current | Original IP address of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.2 | ScalarapCurrentIpAddr | read-only | current | Current IP address of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.3 | ScalarapIpAddr | read-only | current | IP address of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.4 | ScalarapTimeStamp | read-only | current | Time stamp of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.5 | ScalarapAPMac | read-only | current | AP mac address |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.6 | ScalarapSSIDKey | read-only | current | Key SSID |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.7 | ScalarapSSIDKeyConflict | read-only | current | Key SSID |
| 1.3.6.1.4.1.52642.1.1.10.2.80.1.8 | ScalarapCyperIndex | read-only | current | Key SSID |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2 | NodeapStandardRadioTraps | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.1 | NotificationapAPCoInterfDetectedTrap | current | This trap will be sent when the AP is interupted by coherence AP. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.2 | NotificationapAPCoInterfClearTrap | current | This trap is used to clear AP cohererence interference traps. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.3 | NotificationapAPNerborInterfDetectedTrap | current | This trap is used when the AP is interfere by neibor AP. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.4 | NotificationapAPNeiborInterfClearTrap | current | This trap is used to clear AP neibor interference traps. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.5 | NotificationapStaInterfDetectedTrap | current | This trap is used when the AP is interfere by terminal. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.6 | NotificationapStaInterfClearTrap | current | This trap is used to clear AP terminal interference traps. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.7 | NotificationapOtherDeviceInterfDetectedTrap | current | This trap is used when the AP is interfere by other device. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.8 | NotificationapOtherDevInterfClearTrap | current | This trap is used to clear other device interference traps. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.9 | NotificationapRadioDownTrap | current | This trap is sent when radio link is disrupted. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.10 | NotificationapRadioDownRecovTrap | current | This trap is used to clear other wireless link interrupt traps. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.11 | NotificationapAPStaFullTrap | current | This trap is sent when it can't add a mobile user to the AP. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.12 | NotificationapAPStaFullRecoverTrap | current | This trap is used to clear APStaFullRecoverTrap. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.2.13 | NotificationapAPMtRdoChanlChgTrap | current | This trap is sent when radio channel changes. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3 | NodeapStandardRadioTrapsObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.1 | ScalarapInterruptReason | read-only | current | The interrupt reason of the wireless link |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.2 | ScalarapWorkingAPRadioIfInfo | read-only | current | radio interface infomation. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.3 | ScalarapWorkingAPChannel | read-only | current | Channel of working AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.4 | ScalarapInterfAPChannel | read-only | current | Channel of inteference AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.5 | ScalarapInterfAPBSSID | read-only | current | BSSID of inteference AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.6 | ScalarapInterfStaMac | read-only | current | mac of inteference STA |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.7 | ScalarapPermitAssoUser | read-only | current | mac of inteference STA |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.8 | ScalarapAssoFailReason | read-only | current | Association fail reason. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.9 | ScalarapChannelBeforeChange | read-only | current | radio channel before channel change. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.10 | ScalarapChannelAfterChange | read-only | current | radio channel after channel change. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.3.11 | ScalarapChanChangeMode | read-only | current | radio channel change mode. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.4 | NodeapStandardTerminalTraps | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.4.1 | NotificationapStaAuthErrorTrap | current | This trap is sent when terminal authentication failed. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.4.2 | NotificationapStAssociationFailTrap | current | This trap is sent when terminal association failed. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.5 | NodeapStandardTerminalTrapsObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.5.1 | ScalarapWorkingAPBSSID | read-only | current | AP BSSID |
| 1.3.6.1.4.1.52642.1.1.10.2.80.5.2 | ScalarapWorkingAPSSID | read-only | current | AP SSID |
| 1.3.6.1.4.1.52642.1.1.10.2.80.5.3 | ScalarapStaMacAddr | read-only | current | MAC address of the STA |
| 1.3.6.1.4.1.52642.1.1.10.2.80.5.4 | ScalarapAuthMode | read-only | current | auth mode |
| 1.3.6.1.4.1.52642.1.1.10.2.80.5.5 | ScalarapAuthFailReason | read-only | current | Reason of the failure |
| 1.3.6.1.4.1.52642.1.1.10.2.80.6 | NodeapStandardAuthSvrTraps | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.6.1 | NotificationapRadiusAuthServerUnavailableTrap | current | This trap will be sent when Radius authentication server is unavailable. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.6.2 | NotificationapRadiusAuthServerAvailableTrap | current | This trap was used to clear RadiusAuthServerUnavailableTrap. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.6.3 | NotificationapRadioAccServerUnavailableTrap | current | This trap will be sent when Radius charge server is unavailable. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.6.4 | NotificationapRadiusAccServerAvailableTrap | current | This trap was used to clear apRadioAccServerUnavailableTrap. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.7 | NodeapStandardWapiScrTraps | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.7.1 | NotificationapUserWithInvalidCerficationInbreakNetworkTrap | current | This trap will be sent when the network is invaded by user with invalid cerfication. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.7.2 | NotificationapStationRepititiveAttackTrap | current | This trap will be sent when the client station re-attack. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.7.3 | NotificationapTamperAttackTrap | current | This trap will be sent when attack modifies. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.7.4 | NotificationapLowSafeLevelAttackTrap | current | This trap will be sent when low save level attack. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.7.5 | NotificationapAddressRedirectionAttackTrap | current | This trap will be sent when address redirection attack. | |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8 | NodeapConfigInfoObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1 | NodeapSysInfoObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.1 | ScalarapSysNetID | read-write | current | Network elements encoding of AP, unifiedly defined by China Mobile. It's length is not less than 16. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.2 | ScalarapSysHostName | read-write | current | The AP device name, in line with the naming convention of China Mobile. It's length will not be shorter than 40. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.3 | ScalarapSysDescr | read-only | current | The discription of AP device information |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.4 | ScalarapManufacturer | read-only | current | The manufactureer of the ap device. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.5 | ScalarapSerialNumber | read-only | current | The serial number of the ap device. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.6 | ScalarapSysModel | read-only | current | The type of the ap device. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.7 | ScalarapSysTime | read-write | current | The system time displayed on the ap device. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.8 | ScalarapSysUpTime | read-only | current | The run time of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.9 | ScalarapSysIPAddress | read-write | current | The ip of AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.10 | ScalarapSysIPNetMask | read-write | current | The netmask of the AP ip. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.11 | ScalarapSysGWAddr | read-write | current | The gateway address of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.12 | ScalarapPrimDNSServerIPAdd | read-write | current | The prime DNS server address of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.13 | ScalarapSeconDNSServerIPAdd | read-write | current | The second DNS server address of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.14 | ScalarapSysMacAddress | read-only | current | The MAC address of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.15 | ScalarapReadCommunityName | read-write | current | The community name used when reading. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.16 | ScalarapWriteCommunityName | read-write | current | The community name used when writing. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.17 | ScalarapStatWindowTime | read-write | current | The statistic time of sliding window. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.18 | ScalarapSampleTime | read-write | current | The sampling time of AP device. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.19 | ScalarapSysRestart | read-write | current | Restart the device. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.20 | ScalarapSysReset | read-write | current | reset the device to default. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.21 | ScalarapSoftwareName | read-only | current | The software name of the ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.22 | ScalarapSoftwareVersion | read-only | current | The software version of the ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.23 | ScalarapSoftwareVendor | read-only | current | The software vendor of the ap system. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.24 | ScalarapCPUType | read-only | current | The CPU information including CPU Type,dominant frequency and so on. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.25 | ScalarapMemoryType | read-only | current | The memory type of ap. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.26 | ScalarapMemorySize | read-only | current | The memory size of ap. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.1.27 | ScalarapFlashSize | read-only | current | The flash size of ap. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2 | NodeapPhyInterfaceConfig | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.1 | ScalarapIfNumber | read-only | current | The count of the physical interfaces of ap. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2 | TableapWiredInterfaceCfgTable | not-accessible | current | The table discribe wired interface configuration. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1 | RowapWiredInterfaceCfgEntry | not-accessible | current | The entry of apWiredInterfaceCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.1 | ColumnapIfDescr | read-only | current | The description of the ap interfaces. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.2 | ColumnapIfType | read-only | current | The style of the ap interfaces. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.3 | ColumnapIfMTU | read-only | current | The max mtu of the ap interfaces. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.4 | ColumnapIfSpeed | read-only | current | The speed of the ap interfaces. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.5 | ColumnapIfPhysAddress | read-only | current | The MAC address of the ap interfaces. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.6 | ColumnapIfAdminStatus | read-write | current | The status admin of the interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.7 | ColumnapIfOperStatus | read-only | current | The operation status of the interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.2.2.1.8 | ColumnapIfLastChange | read-only | current | The last time of current status. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3 | NodeapRadioInterfaceCfg | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1 | TableapRadioInterfaceInfoTable | not-accessible | current | The table inluding radio interface information Of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1 | RowapRadioInterfaceInfoEntry | not-accessible | current | The entry of apRadioInterfaceInfoTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.1 | ColumnapRadioIfDescr | read-only | current | The discription of radio interface information |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.2 | ColumnapRadioIfType | read-only | current | Radio interface type |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.3 | ColumnapRadioIfMTU | read-only | current | The max tramsform unit of the interface |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.4 | ColumnapRadioIfSpeed | read-only | current | The speed of the interface |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.5 | ColumnapRadioIfMacAddress | read-only | current | The MAC address of the interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.6 | ColumnapRadioIfDiversity | read-only | current | Is diversity supported. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.7 | ColumnapRadioIfAdminStatus | read-write | current | the administration of interface status. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.8 | ColumnapRadioIfOperStatus | read-only | current | Current status of the interface . |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.9 | ColumnapRadioIfLastChange | read-only | current | The last time of current status. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.10 | ColumnapRadioChannelAutoSelectEnable | read-write | current | Decide wether to auto-select radio channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.11 | ColumnapRadioChannelConfig | read-write | current | Set radio channel by hand. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.12 | ColumnapRadioChannelUsing | read-only | current | The current using radio channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.13 | ColumnapCurrRadioModeSupport | read-only | current | The radio model supported. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.14 | ColumnapRadioModeConfig | read-write | current | config radio channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.15 | ColumnapTransmitSpeedConfig | read-write | current | transmit speed config |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.16 | ColumnapMaxTxPwrLvl | read-only | current | The max transmit power |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.17 | ColumnapTxPwr | read-write | current | Transmit power setup. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.18 | ColumnapPwrAttRange | read-only | current | The range of power attenuation. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.19 | ColumnapPwrAttValue | read-write | current | config power attenuation. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.20 | ColumnapAntennaGain | read-only | current | Antenna Gain. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.21 | ColumnapPowerMgmtEnable | read-write | current | whether to open auto power control. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.22 | ColumnapMaxStationNumPermitted | read-write | current | The max number of terminal the interface can suopport. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.23 | ColumnapAMPDUEnabled | read-write | current | A-MPDU Switch. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.24 | ColumnapBWMode | read-write | current | Bandwidth mode select. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.25 | ColumnapShortGIEnabled | read-write | current | Short GI switch. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.1.1.26 | ColumnapIs11nOnly | read-write | current | whether access 11n terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.2 | TableapRadioInterfacePhyParaTable | not-accessible | current | The table describe the physical parameter cofiguration of radio interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.2.1 | RowapRadioInterfacePhyParaEntry | not-accessible | current | The entry of apRadioInterfacePhyParaTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.2.1.1 | ColumnapBeaconIntvl | read-write | current | The interval of beacon. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.2.1.2 | ColumnapDtimIntvl | read-write | current | The interval of DTIM. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.2.1.3 | ColumnapRtsThreshold | read-write | current | Rts Threshold. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.2.1.4 | ColumnapFragThreshlod | read-write | current | Frag Threshold. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.3.2.1.5 | ColumnapPreambleLen | read-write | current | Preamb Length. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4 | NodeapSSIDCfg | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.1 | ScalarapConfigBSSIDNum | read-only | current | The current bssid number of the AP device. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.2 | TableapRadioIfSSIDCfgTable | not-accessible | current | The table describe the SSID cofiguration of radio interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.2.1 | RowapRadioIfSSIDCfgEntry | not-accessible | current | The entry of cmApSSIDCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.2.1.1 | ColumnapBSSID | read-only | current | virtual BSSID. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3 | TableapSSIDCfgTable | not-accessible | current | The table describe the SSID cofiguration of radio interface. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1 | RowapSSIDCfgEntry | not-accessible | current | The entry of apSSIDCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.1 | ColumnapWlanId | read-only | current | The index of the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.2 | ColumnapSSIDName | read-create | current | SSID Name. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.3 | ColumnapSSIDEnabled | read-create | current | whether to enable SSID. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.4 | ColumnapSSIDHidden | read-create | current | Whether to broadcast SSID. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.5 | ColumnapStaIsolate | read-create | current | Whether to isolate SSID. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.6 | ColumnapDot11Auth | read-create | current | 802.11 authentication. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.7 | ColumnapSecurity | read-create | current | security type. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.8 | ColumnapAuthenMode | read-create | current | authentication mode. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.9 | ColumnapSecurityCiphers | read-create | current | encryption type. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.10 | ColumnapVlanId | read-create | current | vlan id. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.11 | ColumnapMaxSimultUsers | read-create | current | The max supported users. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.12 | ColumnapStaUplinkMaxRate | read-create | current | The max up-lind speed for terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.13 | ColumnapStaDwlinkMaxRate | read-create | current | The max down-lind speed for terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.4.3.1.14 | ColumnapSSIDCfgStatus | read-create | current | The status column used for creating and deleting instances of the columnar objects in the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5 | NodeapSecurityCfg | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1 | TableapSecurityCfgTable | not-accessible | current | The table discribe the security configuration of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1 | RowapSecurityCfgEntry | not-accessible | current | The entry of apSecurityCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1.1 | ColumnapWEPCipherKeyIndex | read-write | current | WEP cipher key index. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1.2 | ColumnapWEPCipherKeyValue | read-write | current | WEP Cipher key value. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1.3 | ColumnapWEPCipherKeyCharType | read-write | current | WEP Cipher key char type. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1.4 | ColumnapPSKCipherKeyValue | read-write | current | PSK Cipher key value. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1.5 | ColumnapPSKCipherKeyCharType | read-write | current | PSK Cipher key value. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1.6 | ColumnapWAPIASIPAddress | read-write | current | IP address of WAPI AS. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.5.1.1.7 | ColumnapWAPIIsInstalledCer | read-only | current | Is Certificate installed. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6 | NodeapTerminalCfg | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1 | TableapTerminalInfoTable | not-accessible | current | The table discribe the security configuration of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1 | RowapTerminalInfoEntry | not-accessible | current | The entry of apSecurityCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.1 | ColumnapStaMAC | read-only | current | The MAC address of the termal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.2 | ColumnapStaWMMAttr | read-only | current | VMM attribute of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.3 | ColumnapStaIPAddress | read-only | current | IP address of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.4 | ColumnapStaRadioMode | read-only | current | radio mode of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.5 | ColumnapStaRadioChannel | read-only | current | Radio channel of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.6 | ColumnapStaTxRates | read-only | current | Current rate of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.7 | ColumnapStaPowerSaveMode | read-only | current | Power save mode of the terminal |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.8 | ColumnapStaVlanId | read-only | current | Vlan id where the terminal located. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.9 | ColumnapStaSSIDName | read-only | current | SSID name. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.10 | ColumnapStaDot11Auth | read-only | current | 802.11 authentication. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.11 | ColumnapStaSecurity | read-only | current | Security type. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.12 | ColumnapStaAuthenMode | read-only | current | authentication mdoe. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.6.1.1.13 | ColumnapStaSecurityCiphers | read-only | current | Encryption mode. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7 | NodeapQosCfg | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.1 | TableapQosRadioIfCfgTable | not-accessible | current | The table discribe radio interface configuration information of QOS |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.1.1 | RowapQosRadioIfCfgEntry | not-accessible | current | The entry of apQosRadioIfCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.1.1.1 | ColumnapQoSTrafficClassIndex | read-only | current | ap QOS Service type 0:bestEffort 1:background 2:video 3:voice. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.1.1.2 | ColumnapQosAIFS | read-write | current | AIFS. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.1.1.3 | ColumnapQoSCWmin | read-write | current | CW Min. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.1.1.4 | ColumnapQoSCWmax | read-write | current | CW Max. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.1.1.5 | ColumnapQoSTXOPLim | read-write | current | TXOP Limit. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2 | TableapQosBaseCfgTable | not-accessible | current | The table discribe basic performance configuration information of QOS |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1 | RowapQosBaseCfgEntry | not-accessible | current | The entry of apQosBaseCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.1 | ColumnapQoSBaseTrafficClass | read-write | current | Provide QoS service type. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.2 | ColumnapQoSEnabled | read-write | current | Is QoS enabled. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.3 | ColumnapQoSBW | read-write | current | Total bandwidth of QoS server. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.4 | ColumnapQoSResPercent | read-write | current | Qos resource percentage. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.5 | ColumnapQoSsharedBW | read-write | current | Qos shared bandwidth. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.6 | ColumnapQoSsharedBWPercent | read-write | current | Qos shared bandwidth percentage |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.7 | ColumnapSchedAlgName | read-write | current | The scheduling algorithm between different Qos service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.8 | ColumnapResPolicyEnabled | read-write | current | Is resource Policy enabled. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.9 | ColumnapResPolicyName | read-write | current | the name of resource occupy policy. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.10 | ColumnapBackgroundSvcAvgSpeed | read-write | current | Avearage speed of background service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.11 | ColumnapBackgroundSvcMaxBurst | read-write | current | The max burst of background service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.12 | ColumnapBackgroundSvcPriority | read-write | current | Schedule priority of background service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.13 | ColumnapBackgroundSvcResPriority | read-write | current | Resource occupy priority of background service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.14 | ColumnapBestEffortSvcAvgSpeed | read-write | current | Avearage speed of BestEffort service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.15 | ColumnapBestEffortSvcMaxBurst | read-write | current | The max burst of BestEffort service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.16 | ColumnapBestEffortSvcPriority | read-write | current | Schedule priority of BestEffort service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.17 | ColumnapBestEffortSvcResPriority | read-write | current | Resource occupy priority of BestEffort service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.18 | ColumnapVoiceSvcAvgSpeed | read-write | current | Avearage speed of voice service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.19 | ColumnapVoiceSvcMaxBurst | read-write | current | The max burst of voice service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.20 | ColumnapVoiceSvcPriority | read-write | current | Schedule priority of voice service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.21 | ColumnapVoiceSvcResPriority | read-write | current | Resource occupy priority of voice service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.22 | ColumnapVideoSvcAvgSpeed | read-write | current | Avearage speed of Video service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.23 | ColumnapVideoSvcMaxBurst | read-write | current | The max burst of Video service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.24 | ColumnapVideoSvcPriority | read-write | current | Schedule priority of Video service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.2.1.25 | ColumnapVideoSvcResPriority | read-write | current | Resource occupy priority of Video service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.3 | TableapQosBackgroundCfgTable | not-accessible | current | The table discribe the QoS performance configuration of Background QoS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.3.1 | RowapQosBackgroundCfgEntry | not-accessible | current | The entry of apQosBackgroundCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.3.1.1 | ColumnapBgMaxSvcCnt | read-write | current | The max Concurrence of the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.3.1.2 | ColumnapBgSvcBW | read-write | current | The bandwidth distributed by the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.3.1.3 | ColumnapBgSvcBWPercent | read-write | current | The service-distribute bandwidth percentage. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.3.1.4 | ColumnapBgIsUseWREDAlg | read-write | current | Is WRED algorithm used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.3.1.5 | ColumnapBgIsUseTrafficShaping | read-write | current | Is traffic shaping used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.4 | TableapQosBestEffortCfgTable | not-accessible | current | The table discribe the QoS performance configuration of BestEffort QoS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.4.1 | RowapQosBestEffortCfgEntry | not-accessible | current | The entry of apQosBestEffortCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.4.1.1 | ColumnapBeMaxSvcCnt | read-write | current | The max Concurrence of the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.4.1.2 | ColumnapBeSvcBW | read-write | current | The bandwidth distributed by the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.4.1.3 | ColumnapBeSvcBWPercent | read-write | current | The service-distribute bandwidth percentage. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.4.1.4 | ColumnapBeIsUseWREDAlg | read-write | current | Is WRED algorithm used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.4.1.5 | ColumnapBeIsUseTrafficShaping | read-write | current | Is traffic shaping used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5 | TableapQosVoiceCfgTable | not-accessible | current | The table discribe the QoS performance configuration of Voice QoS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1 | RowapQosVoiceCfgEntry | not-accessible | current | The entry of apQosVoiceCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.1 | ColumnapVoiceMaxSvcCnt | read-write | current | The max Concurrence of the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.2 | ColumnapVoiceSvcBW | read-write | current | The bandwidth distributed by the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.3 | ColumnapVoiceSvcBWPercent | read-write | current | The service-distribute bandwidth percentage. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.4 | ColumnapVoiceIsUseStreamBasedQueue | read-write | current | Is stream baseed queue used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.5 | ColumnapVoiceStreamMaxQueueLen | read-write | current | Is stream max queue used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.6 | ColumnapVoiceStreamAvgSpeed | read-write | current | The avearage speed of the stream |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.7 | ColumnapVoiceStreamMaxBurst | read-write | current | The max burst of the stream |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.8 | ColumnapVoiceIsUseWREDAlg | read-write | current | Is WRED algorithm used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.5.1.9 | ColumnapVoiceIsUseTrafficShaping | read-write | current | Is traffic shaping used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6 | TableapQosVedioCfgTable | not-accessible | current | The table discribe the QoS performance configuration of Vedio QoS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1 | RowapQosVedioCfgEntry | not-accessible | current | The entry of apQosVedioCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.1 | ColumnapVedioMaxSvcCnt | read-write | current | The max Concurrence of the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.2 | ColumnapVedioSvcBW | read-write | current | The bandwidth distributed by the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.3 | ColumnapVedioSvcBWPercent | read-write | current | The service-distribute bandwidth percentage. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.4 | ColumnapVedioIsUseStreamBasedQueue | read-write | current | Is stream baseed queue used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.5 | ColumnapVedioStreamMaxQueueLen | read-write | current | Is stream max queue used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.6 | ColumnapVedioStreamAvgSpeed | read-write | current | The avearage speed of the stream |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.7 | ColumnapVedioStreamMaxBurst | read-write | current | The max burst of the stream |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.8 | ColumnapVedioIsUseWREDAlg | read-write | current | Is WRED algorithm used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.7.6.1.9 | ColumnapVedioIsUseTrafficShaping | read-write | current | Is traffic shaping used? |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8 | NodeapWapiCfg | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1 | TableapWapiProtocolCfgTable | not-accessible | current | The table discribe the WAPI protocol configuration of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1 | RowapWapiProtocolCfgEntry | not-accessible | current | The entry of apWapiProtocolCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.1 | ColumnapConfigVersion | read-only | current | The highest version the WAPI can support. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.2 | ColumnapControlledAuthControl | read-only | current | Whether to invocate authentication. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.3 | ColumnapControlledPortControl | read-only | current | The control type of the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.4 | ColumnapWapiOptionImplemented | read-only | current | Is WAPI supported. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.5 | ColumnapWapiPreauthImplemented | read-only | current | Is WAPI authentication supported. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.6 | ColumnapWapiEnabled | read-write | current | Is WAPI enabled. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.7 | ColumnapWapiPreauthEnabled | read-write | current | Is WAPI authentication enabled. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.8 | ColumnapUnicastKeysSupported | read-only | current | Unicast key number supported. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.9 | ColumnapUnicastRekeyMethod | read-write | current | Unicast key update method. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.10 | ColumnapUnicastRekeyTime | read-write | current | The effective time of Unicast key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.11 | ColumnapUnicastRekeyPackets | read-write | current | The effective package number of unicast key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.12 | ColumnapMulticastCipher | read-write | current | Multicast encryption |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.13 | ColumnapMulticastRekeyMethod | read-write | current | Multicast key update method. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.14 | ColumnapMulticastRekeyTime | read-write | current | The effective time of multicast key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.15 | ColumnapMulticastRekeyPackets | read-write | current | The effective package number of multicast key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.16 | ColumnapMulticastRekeyStrict | read-write | current | Whether to invocate multicast key when terminal leaves from BSS. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.17 | ColumnapPSKValue | read-write | current | PSK value. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.18 | ColumnapPSKPassPhrase | read-write | current | PSK pass phrase. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.19 | ColumnapCertificateUpdateCount | read-write | current | Retry time of Certification. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.20 | ColumnapMulticastUpdateCount | read-write | current | Retry time of MSK. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.21 | ColumnapUnicastUpdateCount | read-write | current | Retry time of unicast key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.22 | ColumnapMulticastCipherSize | read-only | current | Bit length of multicast key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.23 | ColumnapBKLifetime | read-write | current | The life time of broadcast key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.24 | ColumnapBKReauthThreshold | read-write | current | Threshold of reauthentucation. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.25 | ColumnapSATimeout | read-write | current | Time out of safe conection. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.26 | ColumnapAuthSuiteSelected | read-only | current | AKM selected. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.27 | ColumnapUnicastCipherSelected | read-only | current | Encryption type selected by last unicast. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.28 | ColumnapMulticastCipherSelected | read-only | current | ncryption type selected by last multicast. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.29 | ColumnapBKIDUsed | read-only | current | BKID used. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.30 | ColumnapAuthSuiteRequested | read-only | current | The selection requested by last AKM. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.31 | ColumnapUnicastCipherRequested | read-only | current | The selection requested by last unicast. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.1.1.32 | ColumnapMulticastCipherRequested | read-only | current | The selection requested by last multicast. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.2 | TableapWapiUnicastCfgTable | not-accessible | current | The table discribe the WAPI unicast encryption configuration of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.2.1 | RowapWapiUnicastCfgEntry | not-accessible | current | The entry of apWapiUnicastCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.2.1.1 | ColumnapUnicastCipher | read-only | current | The unicast encryption selected. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.2.1.2 | ColumnapUnicastCipherEnabled | read-write | current | Wether to enable unicast encryption. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.2.1.3 | ColumnapUnicastCipherSize | read-only | current | The bit length of unicase key. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.3 | TableapWapiAKMCfgTable | not-accessible | current | The table discribe the AKM configuration of the AP |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.3.1 | RowapWapiAKMCfgEntry | not-accessible | current | The entry of apWapiAKMCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.3.1.1 | ColumnapAuthenticationSuite | read-only | current | The AKM selected. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.8.3.1.2 | ColumnapAuthenticationSuiteEnabled | read-write | current | Wether to enable AKM. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9 | NodeapSyslogCfg | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9.1 | ScalarapSyslogSvcEnable | read-write | current | Whether to open syslog service |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9.2 | ScalarapSyslogReportEventLevel | read-write | current | Report event level |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9.3 | TableapSyslogSvrCfgTable | not-accessible | current | The table discribe the system log configuration of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9.3.1 | RowapSyslogSvrCfgEntry | not-accessible | current | The entry of apSyslogSvrCfgTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9.3.1.1 | ColumnapSyslogSvrIndex | read-only | current | The index of the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9.3.1.2 | ColumnapSyslogServerAddr | read-create | current | Address of syslog server. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.9.3.1.3 | ColumnapSyslogStatus | read-create | current | Address of syslog server. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10 | NodeapSoftwareUpdate | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.1 | ScalarapLoadFlag | read-write | current | File send type |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.2 | ScalarapFileName | read-write | current | File name |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.3 | ScalarapFileType | read-write | current | File type |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.4 | ScalarapTransProtocol | read-write | current | File transmit protocol |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.5 | ScalarapServerAddr | read-write | current | Address of remote server |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.6 | ScalarapServerPort | read-write | current | Port of remote server |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.7 | ScalarapServerUsername | read-write | current | Port of remote server |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.8 | ScalarapServerPasswd | read-write | current | Encryption of remote server. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.9 | ScalarapTransStatus | read-only | current | Running status of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.10.10 | ScalarapFailReason | read-only | current | Fail reason. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11 | NodeapCfgFileDistribute | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.1 | ScalarapCfgFileLoadFlag | read-write | current | File send type. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.2 | ScalarapCfgFileFileName | read-write | current | File name |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.3 | ScalarapCfgFileFileType | read-write | current | File type |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.4 | ScalarapCfgFileTransProtocol | read-write | current | File transmit protocol |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.5 | ScalarapCfgFileServerAddr | read-write | current | Address of remote server |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.6 | ScalarapCfgFileServerPort | read-write | current | Port of remote server |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.7 | ScalarapCfgFileServerUsername | read-write | current | Port of remote server |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.8 | ScalarapCfgFileServerPasswd | read-write | current | Encryption of remote server. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.9 | ScalarapCfgFileTransStatus | read-only | current | Running status of the AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.11.10 | ScalarapCfgFileFailReason | read-write | current | Fail reason. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12 | NodeapAccessControl | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.1 | TableapTerminalPermitTable | not-accessible | current | Terminal white list |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.1.1 | RowapTerminalPermitEntry | not-accessible | current | The entry of apTerminalPermitTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.1.1.1 | ColumnapWhiteListIndex | read-only | current | The index of the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.1.1.2 | ColumnapPermitMAC | read-create | current | The permited MAC address. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.1.1.3 | ColumnapWhiteListStatus | read-create | current | The status column used for creating and deleting instances of the columnar objects in the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.2 | TableapTerminalDeniedTable | not-accessible | current | Terminal black list |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.2.1 | RowapTerminalDeniedEntry | not-accessible | current | The entry of apTerminalDeniedTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.2.1.1 | ColumnapBlackListIndex | read-only | current | The index of the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.2.1.2 | ColumnapAttackDeviceMAC | read-create | current | The Denied MAC address. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.12.2.1.3 | ColumnapBlackListStatus | read-create | current | The status column used for creating and deleting instances of the columnar objects in the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13 | NodeapTrapConfig | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.1 | ScalarapTrapResendWaitingTime | read-write | current | waiting time for trap resend. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.2 | ScalarapCPUusageThreshhd | read-write | current | CUP usage threshold. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.3 | ScalarapMemUsageThreshhd | read-write | current | Memory usage threshold. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.4 | ScalarapAPCoInterfThreshhd | read-write | current | AP cointerference threshold. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.5 | ScalarapAPNeiborInterfThreshhd | read-write | current | AP neibor interference threshold. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.6 | ScalarapStaInterfNumThreshhd | read-write | current | Terminal interference threshold. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.7 | ScalarapHeartbeatOnOff | read-write | current | Heartbeat detect switch. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.8 | ScalarapHeartbeatPeriod | read-write | current | Heartbeat detect periode. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.9 | TableapTrapAddrTable | not-accessible | current | Configuration of trap address |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.9.1 | RowapTrapAddrEntry | not-accessible | current | The entry of apTrapAddrTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.9.1.1 | ColumnapTrapDesAddrIndex | read-only | current | The index of the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.9.1.2 | ColumnapTrapDesIPAddress | read-create | current | Trap address. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.9.1.3 | ColumnapTrapAddrStatus | read-create | current | The status column used for creating and deleting instances of the columnar objects in the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.10 | TableapTrapEnabledTable | not-accessible | current | Configuration of trap enabled |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.10.1 | RowapTrapEnabledEntry | not-accessible | current | The entry of apTrapEnabledTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.10.1.1 | ColumnapTrapEnabledIndex | read-only | current | index of apTrapEnabledTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.10.1.2 | ColumnapTrapName | read-only | current | Trap name. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.10.1.3 | ColumnapTrapDescr | read-write | current | Trap description. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.13.10.1.4 | ColumnapTrapOnOff | read-write | current | Trap switch. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.14 | NodeapVlanConfig | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.14.10 | TableapVlanConfigTable | not-accessible | current | Configuration of vlan |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.14.10.1 | RowapVlanConfigEntry | not-accessible | current | The entry of apVlanConfigTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.14.10.1.1 | ColumnapVlanCfgVlanId | read-create | current | Vlan ID. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.14.10.1.2 | ColumnapVlanCfgStatus | read-create | current | The status column used for creating and deleting instances of the columnar objects in the table. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.15 | NodeapHeartbeatConfig | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.8.15.1 | ScalarapHeartbeatCycle | read-write | current | Timespace of heartbeat. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9 | NodeapPerformanceStatObjects | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.1 | NodeapSysPerformanceStat | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.1.1 | ScalarapCPURTUsage | read-only | current | Real-time use ratio of CPU. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.1.2 | ScalarapCPUAvgUsage | read-only | current | Avearage use ratio of CPU. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.1.3 | ScalarapMemRTUsage | read-only | current | Real-time use ratio of memory. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.1.4 | ScalarapMemAvgUsage | read-only | current | Avearage use ratio of memory. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2 | NodeapConInfoStat | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.1 | ScalarapApStationAssocSum | read-only | current | The number of terminal that connect to AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.2 | ScalarapApStationOnlineSum | read-only | current | The number of terminal on line. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.3 | ScalarapAssocTimes | read-only | current | Total association times. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.4 | ScalarapAssocFailTimes | read-only | current | Total failure times of association |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.5 | ScalarapReassocTimes | read-only | current | Reassociation times. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.6 | ScalarapPreAssCannotShiftDeassocFailSum | read-only | current | . |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.7 | ScalarapApStatsDisassociated | read-only | current | . |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.8 | ScalarapAssocRejectSum | read-only | current | . |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.2.9 | ScalarapBSSNotSupportAssocFailSum | read-only | current | . |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3 | NodeapIfPeformanceStat | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1 | TableapWiredIfPfmStatTable | not-accessible | current | Statistic of wired interface performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1 | RowapWiredIfPfmStatEntry | not-accessible | current | The entry of apWiredIfPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.1 | ColumnapIfInUcastPkts | read-only | current | Unicast packages received by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.2 | ColumnapIfInNUcastPkts | read-only | current | Non-Unicast packages received by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.3 | ColumnapIfInOctets | read-only | current | Total bytes received by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.4 | ColumnapIfInDiscardPkts | read-only | current | Packages discarded by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.5 | ColumnapIfInErrors | read-only | current | Error packages received by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.6 | ColumnapIfOutUcastPkts | read-only | current | Unicast packages sent by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.7 | ColumnapIfOutNUcastPkts | read-only | current | Non-unicast packages sent by the port.. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.8 | ColumnapIfOutOctets | read-only | current | total bytes sent by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.9 | ColumnapIfOutDiscardPkts | read-only | current | Packages discarded by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.10 | ColumnapIfOutErrors | read-only | current | Error packages received by the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.1.1.11 | ColumnapIfUpDwnTimes | read-only | current | Updown times of the port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2 | TableapRadioIfPfmStatTable | not-accessible | current | Statistic of wireless interface performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1 | RowapRadioIfPfmStatEntry | not-accessible | current | The entry of apRadioIfPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.1 | ColumnapAvgRxSignalStrength | read-only | current | Avearage receive signal strength. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.2 | ColumnapHighestRxSignalStrength | read-only | current | Highest received signal strength. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.3 | ColumnapLowestRxSignalStrength | read-only | current | Lowest received signal strength. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.4 | ColumnapUpdownTimes | read-only | current | Updown times of wireless port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.5 | ColumnapTxDataPkts | read-only | current | Data package number transmited. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.6 | ColumnapRxDataPkts | read-only | current | Data package number received. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.7 | ColumnapUplinkDataOctets | read-only | current | Data package bytes received. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.8 | ColumnapDwlinkDataOctets | read-only | current | Data package bytes transmited. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.9 | ColumnapChStatsDwlinkTotRetryPkts | read-only | current | Retry packages of downlink. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.10 | ColumnapChStatsPhyErrPkts | read-only | current | Error physical packages received by channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.11 | ColumnapChStatsMacFcsErrPkts | read-only | current | Error FCS MAC packages received by channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.12 | ColumnapChStatsMacMicErrPkts | read-only | current | Error MIC MAC packages received by channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.13 | ColumnapChStatsMacDecryptErrPkts | read-only | current | Error Decrypted MAC packages received by channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.14 | ColumnapChStatsTotalErrPkts | read-only | current | Total error packages received by channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.15 | ColumnapRxMgmtFrameCnt | read-only | current | Number of RX management frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.16 | ColumnapRxCtrlFrameCnt | read-only | current | Number of RX control frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.17 | ColumnapRxDataFrameCnt | read-only | current | Number of RX data frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.18 | ColumnapTxMgmtFrameCnt | read-only | current | Number of TX management frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.19 | ColumnapTxCtrlFrameCnt | read-only | current | Number of TX control frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.20 | ColumnapTxDataFrameCnt | read-only | current | Number of TX data frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.21 | ColumnapChStatsFrameErrorCnt | read-only | current | Received error frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.22 | ColumnapRetryCnt | read-only | current | retry count. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.23 | ColumnapCurTxPwr | read-only | current | TX power of AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.24 | ColumnapAPNeighborSSIDList | read-only | current | SSID list around AP. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.25 | ColumnapChanStaNum | read-only | current | The associated sta number of the channel. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.26 | ColumnapChDownUnicastFrame | read-only | current | Down link unicast frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.27 | ColumnapChDownNonUnicastFrame | read-only | current | Down link non-unicast frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.28 | ColumnapChRxAuthFrame | read-only | current | Receive auth frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.29 | ColumnapChRxAssoFrame | read-only | current | Receive association frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.30 | ColumnapChTxAuthFrame | read-only | current | transmit auth frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.3.2.1.31 | ColumnapChTxAssoFrame | read-only | current | transmit association frames. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4 | NodeapSSIDPeformanceStat | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1 | TableapSSIDPfmStatTable | not-accessible | current | Statistic of wireless SSID performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1.1 | RowapSSIDPfmStatEntry | not-accessible | current | The entry of apSSIDPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1.1.1 | ColumnapSSIDTxDataPkts | read-only | current | Data packages transmited. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1.1.2 | ColumnapSSIDRxDataPkts | read-only | current | Data packages received. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1.1.3 | ColumnapSSIDUplinkDataOctets | read-only | current | Data packages bytes received. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1.1.4 | ColumnapSSIDDwlinkDataOctets | read-only | current | Data packages bytes transmited. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1.1.5 | ColumnapSSIDChStatsDwlinkTotRetryPkts | read-only | current | Downlink retransmit packages. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.4.1.1.6 | ColumnapSSIDApChStatsNumStations | read-only | current | Terminal number connected to the SSID. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5 | NodeapTermPeformanceStat | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1 | TableapTermPfmStatTable | not-accessible | current | Statistic of Terminal performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1 | RowapTermPfmStatEntry | not-accessible | current | The entry of apTermPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.1 | ColumnapStaAddress | read-only | current | MAC address of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.2 | ColumnapStaUpTime | read-only | current | Up time of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.3 | ColumnapAPReceivedStaSignalStrength | read-only | current | Current signal strength of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.4 | ColumnapAPReceiveStaSNR | read-only | current | SNR of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.5 | ColumnapStaTxPkts | read-only | current | Total packages transmited to the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.6 | ColumnapStaTxBytes | read-only | current | Total bytes transmited to the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.7 | ColumnapStaRxPkts | read-only | current | Total packages receive from the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.5.1.1.8 | ColumnapStaRxBytes | read-only | current | Total bytes receive from the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6 | NodeapWAPIPeformanceStat | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1 | TableapWAPIPfmStatTable | not-accessible | current | Statistic of WAPI performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1 | RowapWAPIPfmStatEntry | not-accessible | current | The entry of apWAPIPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.1 | ColumnapSTAAddress | read-only | current | MAC address of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.2 | ColumnapVersion | read-only | current | WAPI version of the terminal. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.3 | ColumnapControlledPortStatus | read-only | current | Status of auhen control port. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.4 | ColumnapSelectedUnicastCipher | read-only | current | Unicast Encryption selected. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.5 | ColumnapWPIReplayCounters | read-only | current | MPDU number discarded. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.6 | ColumnapWPIDecryptableErrors | read-only | current | MPDU number discarded. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.7 | ColumnapWPIMICErrors | read-only | current | MPDU number discarded. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.8 | ColumnapWAISignatureErrors | read-only | current | WAI packages due to signature error. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.9 | ColumnapWAIHMACErrors | read-only | current | WAI packages due to MIC certificate failure. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.10 | ColumnapWAIAuthResultFailures | read-only | current | WAI number for authen failure. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.11 | ColumnapWAIDiscardCounters | read-only | current | Packages number discarded by WAI. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.12 | ColumnapWAITimeoutCounters | read-only | current | WAI packages number for time out. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.13 | ColumnapWAIFormatErrors | read-only | current | Number of WAI packages for format error. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.14 | ColumnapWAICertificateHandshakeFailures | read-only | current | Number of WAI packages for hand shake failure. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.15 | ColumnapWAIUnicastHandshakeFailures | read-only | current | Number of WAI packages for unicast hand shake failure. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.6.1.1.16 | ColumnapWAIMulticastHandshakeFailures | read-only | current | Number of WAI packages for multicast key failure. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7 | NodeapQOSPeformanceStat | |||
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.1 | TableapQosBasePfmStatTable | not-accessible | current | Statistic of QOS basic performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.1.1 | RowapQosBasePfmStatEntry | not-accessible | current | The entry of apQosBasePfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.1.1.1 | ColumnapQoSSvcQueAvgLen | read-only | current | Avearage queue length of QOS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.1.1.2 | ColumnapQoSSvcPktLossRatio | read-only | current | Total loss ratio of QoS. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.1.1.3 | ColumnapAvgTransSpeed | read-only | current | Avearage transmit speed. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.2 | TableapBackgroundQosPfmStatTable | not-accessible | current | Statistic of Background QOS performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.2.1 | RowapBackgroundQosPfmStatEntry | not-accessible | current | The entry of apBackgroundQosPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.2.1.1 | ColumnapBgQueAvgLen | read-only | current | Avearage queue length of QOS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.2.1.2 | ColumnapBgAvgBurst | read-only | current | Avearage burst. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.2.1.3 | ColumnapBgPktLossRatio | read-only | current | Package lost ratio. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.2.1.4 | ColumnapBgAvgTransSpeed | read-only | current | Avearage transmit speed. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.2.1.5 | ColumnapBgSvcLoss | read-only | current | Service loss. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.3 | TableapBestEffortQosPfmStatTable | not-accessible | current | Statistic of BestEffort QOS performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.3.1 | RowapBestEffortQosPfmStatEntry | not-accessible | current | The entry of apBestEffortQosPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.3.1.1 | ColumnapBeQueAvgLen | read-only | current | Avearage queue length of QOS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.3.1.2 | ColumnapBeAvgBurst | read-only | current | Avearage burst. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.3.1.3 | ColumnapBePktLossRatio | read-only | current | Package lost ratio. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.3.1.4 | ColumnapBeAvgTransSpeed | read-only | current | Avearage transmit speed. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.3.1.5 | ColumnapBeSvcLoss | read-only | current | Service loss. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4 | TableapVoiceQosPfmStatTable | not-accessible | current | Statistic of Voice QOS performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1 | RowapVoiceQosPfmStatEntry | not-accessible | current | The entry of apVoiceQosPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.1 | ColumnapVoiceQueAvgLen | read-only | current | Avearage queue length of QOS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.2 | ColumnapVoiceAvgBurst | read-only | current | Avearage burst. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.3 | ColumnapVoicePktLossRatio | read-only | current | Package lost ratio. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.4 | ColumnapVoiceAvgTransSpeed | read-only | current | Avearage transmit speed. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.5 | ColumnapVoicePutThroughRatio | read-only | current | Put through ratio of the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.6 | ColumnapVoiceDropRatio | read-only | current | Drop ratio of the voice service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.7 | ColumnapVoiceSvcLoss | read-only | current | loss service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.4.1.8 | ColumnapVoiceExceedMaxUsersRequest | read-only | current | voice exceed max users request. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5 | TableapVedioQosPfmStatTable | not-accessible | current | Statistic of Voice QOS performance. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1 | RowapVedioQosPfmStatEntry | not-accessible | current | The entry of apVedioQosPfmStatTable. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.1 | ColumnapVedioQueAvgLen | read-only | current | Avearage queue length of QOS service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.2 | ColumnapVedioAvgBurst | read-only | current | Avearage burst. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.3 | ColumnapVedioPktLossRatio | read-only | current | Package lost ratio. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.4 | ColumnapVedioAvgTransSpeed | read-only | current | Avearage transmit speed. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.5 | ColumnapVedioPutThroughRatio | read-only | current | Put through ratio of the service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.6 | ColumnapVedioDropRatio | read-only | current | Drop ratio of the voice service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.7 | ColumnapVedioSvcLoss | read-only | current | loss service. |
| 1.3.6.1.4.1.52642.1.1.10.2.80.9.7.5.1.8 | ColumnapVedioExceedMaxUsersRequest | read-only | current | voice exceed max users request. |