FSSNTP-MIB
63 objects
This mib module is for SNTP
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.149 | IdentityfsSntpMIB | This mib module is for SNTP | ||
| 1.3.6.1.4.1.10876.101.1.149.1 | NodefsSntp | |||
| 1.3.6.1.4.1.10876.101.1.149.1.1 | NodefsSntpScalars | |||
| 1.3.6.1.4.1.10876.101.1.149.1.1.1 | ScalarfsSntpGlobalTrace | read-write | current | This is used to enable Trace Statements in SNTP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte inte… |
| 1.3.6.1.4.1.10876.101.1.149.1.1.2 | ScalarfsSntpGlobalDebug | read-write | current | This is used to enable Debug statements in SNTP module. A Four byte integer value is specified for enabling the level of debugging. Each bit in the four byte i… |
| 1.3.6.1.4.1.10876.101.1.149.1.1.3 | ScalarfsSntpAdminStatus | read-write | current | To enable or disable the sntp client module. All configuration will be acitve only when the SNTP module is enabled |
| 1.3.6.1.4.1.10876.101.1.149.1.1.4 | ScalarfsSntpClientVersion | read-write | current | The SNTP client module can run in any one version 1, version 2, version 3 or version 4. All the SNTP requests are sent out with the current configured version … |
| 1.3.6.1.4.1.10876.101.1.149.1.1.5 | ScalarfsSntpClientAddressingMode | read-write | current | unicast: - SNTP client operates in a point-to-point fashion. A unicast client sends a request to a designated server at its unicast address and expects a reply… |
| 1.3.6.1.4.1.10876.101.1.149.1.1.6 | ScalarfsSntpClientPort | read-write | current | The SNTP client module by default listens on well-know port number 123. When required, the Administrator can change the SNTP Client port value to non-default. |
| 1.3.6.1.4.1.10876.101.1.149.1.1.7 | ScalarfsSntpTimeDisplayFormat | read-write | current | The administrator can view the system time in 12 hr AM/PM or 24 hours format. |
| 1.3.6.1.4.1.10876.101.1.149.1.1.8 | ScalarfsSntpAuthKeyId | read-write | current | Key Identifier is an integer identifying the cryptographic key used to generate the message-authentication code |
| 1.3.6.1.4.1.10876.101.1.149.1.1.9 | ScalarfsSntpAuthAlgorithm | read-write | current | When the NTP authentication scheme is implemented, the Key Identifier and Message Digest fields contain the message authentication code (MAC) information. Mess… |
| 1.3.6.1.4.1.10876.101.1.149.1.1.10 | ScalarfsSntpAuthKey | read-write | current | Authentication key is cryptographic key that is used to implement NTP Authentication |
| 1.3.6.1.4.1.10876.101.1.149.1.1.11 | ScalarfsSntpTimeZone | read-write | current | To set the system time zone with respect to UTC. ie plus indicates forward time zone ( ahead of UTC Time eg: +05:30) and minus indicates backward time zone (be… |
| 1.3.6.1.4.1.10876.101.1.149.1.1.12 | ScalarfsSntpDSTStartTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.10876.101.1.149.1.1.13 | ScalarfsSntpDSTEndTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.10876.101.1.149.1.1.14 | ScalarfsSntpClientUptime | read-only | current | The uptime of the SNTP client entity in seconds. |
| 1.3.6.1.4.1.10876.101.1.149.1.1.15 | ScalarfsSntpClientStatus | read-only | current | The status of the SNTP client as integer value. |
| 1.3.6.1.4.1.10876.101.1.149.1.1.16 | ScalarfsSntpServerReplyRxCount | read-only | current | Number of SNTP server replies that has received by SNTP client. |
| 1.3.6.1.4.1.10876.101.1.149.1.1.17 | ScalarfsSntpClientReqTxCount | read-only | current | Number of requests the SNTP client has Transmitted. |
| 1.3.6.1.4.1.10876.101.1.149.1.1.18 | ScalarfsSntpPktInDiscardCount | read-only | current | Number of replies the SNTP client has rejected. |
| 1.3.6.1.4.1.10876.101.1.149.1.2 | NodefsSntpUnicast | |||
| 1.3.6.1.4.1.10876.101.1.149.1.2.1 | ScalarfsSntpServerAutoDiscovery | read-write | current | The SNTP servers can be configured or discovered. When Auto Discover is disabled, the SNTP client gets the time from the configured servers. When Auto Discover… |
| 1.3.6.1.4.1.10876.101.1.149.1.2.2 | ScalarfsSntpUnicastPollInterval | read-write | current | The number of seconds between successive SNTP request transmissions. |
| 1.3.6.1.4.1.10876.101.1.149.1.2.3 | ScalarfsSntpUnicastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out' |
| 1.3.6.1.4.1.10876.101.1.149.1.2.4 | ScalarfsSntpUnicastPollRetry | read-write | current | The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When… |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5 | TablefsSntpUnicastServerTable | not-accessible | current | The table contains configured SNTP/NTP servers in the system. |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1 | RowfsSntpUnicastServerEntry | not-accessible | current | Each entry in the table contains necessary information to send SNTP request to the servers. |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.1 | ColumnfsSntpUnicastServerAddrType | not-accessible | current | The Address type of the unicast server in the Unicast Addressing mode. It can be IPv4 or IPv6 unicast address or DNS |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.2 | ColumnfsSntpUnicastServerAddr | not-accessible | current | The unicast IPv4/IPv6 server address in the Unicast Addressing mode. It supports hostname when the fsSntpUnicastServerAddrType is of DNS type |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.3 | ColumnfsSntpUnicastServerVersion | read-write | current | the sntp version supported by the server |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.4 | ColumnfsSntpUnicastServerPort | read-write | current | the sntp port on which the server is UP |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.5 | ColumnfsSntpUnicastServerType | read-write | current | In Unicast addressing mode, we can have primary and secondary servers. This flag is to distinguish between primary and secondary server. SNTP client sends requ… |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.6 | ColumnfsSntpUnicastServerLastUpdateTime | read-only | current | The local time when the system time was successful |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.7 | ColumnfsSntpUnicastServerTxRequests | read-only | current | The number of SNTP request sent in the Unicast addressing mode. |
| 1.3.6.1.4.1.10876.101.1.149.1.2.5.1.8 | ColumnfsSntpUnicastServerRowStatus | read-write | current | The activation of a row adds server entry. The destruction of a row removes server entry |
| 1.3.6.1.4.1.10876.101.1.149.1.3 | NodefsSntpBroadcast | |||
| 1.3.6.1.4.1.10876.101.1.149.1.3.1 | ScalarfsSntpSendRequestInBcastMode | read-write | current | when enabled the sntp request will be sent to the broadcast server to calculate the dealy time. This is valid only in broadcast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.3.2 | ScalarfsSntpPollTimeoutInBcastMode | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This is valid only in broadcast addressing … |
| 1.3.6.1.4.1.10876.101.1.149.1.3.3 | ScalarfsSntpDelayTimeInBcastMode | read-write | current | The broadcast server may send reply for the request. When the SNTP client does get response from the boradcast server, this value is taken as delay time |
| 1.3.6.1.4.1.10876.101.1.149.1.3.4 | ScalarfsSntpPrimaryServerAddrInBcastMode | read-only | current | The primary server IP address learnt in Broadcast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.3.5 | ScalarfsSntpSecondaryServerAddrInBcastMode | read-only | current | The secondary server IP address learnt in Broadcast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.4 | NodefsSntpMulticast | |||
| 1.3.6.1.4.1.10876.101.1.149.1.4.1 | ScalarfsSntpSendRequestInMcastMode | read-write | current | when enabled the sntp request will be sent to the multicast server to calculate the dealy time. |
| 1.3.6.1.4.1.10876.101.1.149.1.4.2 | ScalarfsSntpPollTimeoutInMcastMode | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out' |
| 1.3.6.1.4.1.10876.101.1.149.1.4.3 | ScalarfsSntpDelayTimeInMcastMode | read-write | current | this is taken as delay time when there is no response from the multicast server |
| 1.3.6.1.4.1.10876.101.1.149.1.4.4 | ScalarfsSntpGrpAddrTypeInMcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.10876.101.1.149.1.4.5 | ScalarfsSntpGrpAddrInMcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.10876.101.1.149.1.4.6 | ScalarfsSntpPrimaryServerAddrTypeInMcastMode | read-only | current | The address type of the primary server learnt in Multicast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.4.7 | ScalarfsSntpPrimaryServerAddrInMcastMode | read-only | current | The primary server IP address learnt in Multicast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.4.8 | ScalarfsSntpSecondaryServerAddrTypeInMcastMode | read-only | current | The address type of the secondary server learnt in Multicast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.4.9 | ScalarfsSntpSecondaryServerAddrInMcastMode | read-only | current | The secondary server IP address learnt in Multicast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.5 | NodefsSntpAnycast | |||
| 1.3.6.1.4.1.10876.101.1.149.1.5.1 | ScalarfsSntpAnycastPollInterval | read-write | current | The number of seconds between successive SNTP request transmissions. For Example, if the Poll Interval is 64 secs then the Sntp client will send the client req… |
| 1.3.6.1.4.1.10876.101.1.149.1.5.2 | ScalarfsSntpAnycastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. |
| 1.3.6.1.4.1.10876.101.1.149.1.5.3 | ScalarfsSntpAnycastPollRetry | read-write | current | The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When… |
| 1.3.6.1.4.1.10876.101.1.149.1.5.4 | ScalarfsSntpServerTypeInAcastMode | read-write | current | To set the type of servers to be used in Manycast addressing mode i.e to find a manycast server the client can send the request to either broadcast or multicas… |
| 1.3.6.1.4.1.10876.101.1.149.1.5.5 | ScalarfsSntpGrpAddrTypeInAcastMode | read-write | current | The address type of the server configured by the administrator i.e the address is either IPv4 address or IPv6 address |
| 1.3.6.1.4.1.10876.101.1.149.1.5.6 | ScalarfsSntpGrpAddrInAcastMode | read-write | current | The multicast group address can be configured by the administrator. i.e to which address the client will send the requesr packet to find out the manycast serve… |
| 1.3.6.1.4.1.10876.101.1.149.1.5.7 | ScalarfsSntpPrimaryServerAddrTypeInAcastMode | read-only | current | The address type of the primary server learnt in Manycast addressing mode i.e IPv4 address or IPv6 address. |
| 1.3.6.1.4.1.10876.101.1.149.1.5.8 | ScalarfsSntpPrimaryServerAddrInAcastMode | read-only | current | The primary server IP address learnt in Manycast addressing mode after sending the request packet to the broadcast or multicast address. |
| 1.3.6.1.4.1.10876.101.1.149.1.5.9 | ScalarfsSntpSecondaryServerAddrTypeInAcastMode | read-only | obsolete | The address type of the secondary server learnt in Manycast addressing mode |
| 1.3.6.1.4.1.10876.101.1.149.1.5.10 | ScalarfsSntpSecondaryServerAddrInAcastMode | read-only | obsolete | The IP address of secondary server, learnt in Manycast addressing mode |