FspR7-SPEQ-MIB
91 objects
The Auto SPAN Equalization MIB.
Imported Objects
| ADVA-MIB | EntityClass EntityIndex fspR7 neEventLogIdentityTranslation neEventLogTimeStamp ServiceImpairment TrapAlarmSeverity |
| FspR7-MIB | FspR7AdminState FspR7AdminStateCaps FspR7EntitySecondaryStates FspR7Integer32Caps FspR7OperState |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE snmpModules TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TestAndIncr TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.11.4 | IdentityspeqMIB | The Auto SPAN Equalization MIB. | ||
| 1.3.6.1.4.1.2544.1.11.4.10 | NodespeqEntityMIB | |||
| 1.3.6.1.4.1.2544.1.11.4.10.1 | TablespeqEntityTable | not-accessible | current | Table for SPEQ existing addresses. Entities in this table are either provisioned or not. Containers are always present in the table as long as their supporting… |
| 1.3.6.1.4.1.2544.1.11.4.10.1.1 | RowspeqEntityEntry | not-accessible | current | Entry for SPEQ existing addresses. |
| 1.3.6.1.4.1.2544.1.11.4.10.1.1.1 | ColumnspeqEntityIndex | accessible-for-notify | current | Existing adress index |
| 1.3.6.1.4.1.2544.1.11.4.10.1.1.2 | ColumnspeqEntityContainedIn | read-only | current | Contained in |
| 1.3.6.1.4.1.2544.1.11.4.10.1.1.3 | ColumnspeqEntityClassInstanceNumber | read-only | current | The class instance number of this entity within the module(card) |
| 1.3.6.1.4.1.2544.1.11.4.10.1.1.4 | ColumnspeqEntityIndexAid | read-only | current | Name |
| 1.3.6.1.4.1.2544.1.11.4.10.2 | TablespeqContainsTable | not-accessible | current | Table for all existing addresses. Gives the index of the subtending entity in the containment. |
| 1.3.6.1.4.1.2544.1.11.4.10.2.1 | RowspeqContainsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.10.2.1.1 | ColumnspeqContainsIndex | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.12 | NodespeqConfigurationMIB | |||
| 1.3.6.1.4.1.2544.1.11.4.12.1 | ScalarspeqConfiguration | read-write | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.2 | ScalarspeqDynamicComp | read-write | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.10 | TablespeqConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.10.1 | RowspeqConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.10.1.1 | ColumnspeqConfigAdmin | read-write | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.10.1.2 | ColumnspeqConfigOpticalSetpoint | read-write | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.10.1.3 | ColumnspeqConfigPerChannelPower | read-write | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.10.1.4 | ColumnspeqConfigGainCal | read-write | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.10.1.5 | ColumnspeqConfigOperate | read-write | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.11 | TablespeqConfigCapTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.11.1 | RowspeqConfigCapEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.11.1.1 | ColumnspeqConfigCapAdmin | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.11.1.2 | ColumnspeqConfigCapOpticalSetpoint | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.11.1.3 | ColumnspeqConfigCapPerChannelPower | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.12.11.1.4 | ColumnspeqConfigCapGainCal | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13 | NodespeqStatusMIB | |||
| 1.3.6.1.4.1.2544.1.11.4.13.10 | TablespeqStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1 | RowspeqStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.1 | ColumnspeqStatusOper | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.2 | ColumnspeqStatusSecondaryStates | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.3 | ColumnspeqStatusQualify | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.4 | ColumnspeqStatusOpticalLineAid | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.5 | ColumnspeqStatusOscAid | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.6 | ColumnspeqStatusOpticalLineServiceType | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.7 | ColumnspeqStatusPerChannelPowerLimit | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.8 | ColumnspeqStatusCalculatedGain | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.9 | ColumnspeqStatusStatus | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.10 | ColumnspeqStatusFarEndConfig | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.11 | ColumnspeqStatusFarEndStatus | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.12 | ColumnspeqStatusFarEndPpc | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.13 | ColumnspeqStatusFarEndOpt | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.14 | ColumnspeqStatusFarEndOpr | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.15 | ColumnspeqStatusNearEndOpt | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.13.10.1.16 | ColumnspeqStatusNearEndOpr | read-only | current | |
| 1.3.6.1.4.1.2544.1.11.4.14 | NodespeqAlarms | |||
| 1.3.6.1.4.1.2544.1.11.4.14.1 | NodespeqTraps | |||
| 1.3.6.1.4.1.2544.1.11.4.14.1.0 | NodespeqTrapsPrefix | |||
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120000 | NotificationalarmOosDisabledSpeq | current | Non-Specific Disablement of Management Access | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120002 | NotificationalarmOosMaintenanceSpeq | current | Alarms are logged but not notified, service affecting changes and operations are permitted | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120004 | NotificationalarmMessageLossSpeq | current | SPEQ Message Loss | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120005 | NotificationalarmOscFiberMissingSpeq | current | SPEQ not functioning, OSC Fiber(s) missing | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120006 | NotificationalarmOptLowSpeq | current | Alarm is raised at SPEQ Booster-amp, when the OPT is less than the provisioned PPC by 2dBm. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120007 | NotificationalarmPpcOutOfRangeSpeq | current | Adopted PPC exceeded the PPC range | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120008 | NotificationalarmGainTooHighSpeq | current | Auto Span Equalization Gain Out-of-Range, High - SPEQ calculated gain value is greater than the gain setting range of an EDFA type. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120009 | NotificationalarmGainTooLowSpeq | current | Auto Span Equalization Gain Out-of-Range, Low - SPEQ calculated gain value is lower than the gain setting range of an EDFA type. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.120010 | NotificationalarmGainAdoptFailedSpeq | current | Alarm is raised when SPEQ Gain Adoption process fails. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.124001 | NotificationspeqCreation | current | This trap is sent every time an entity is created. No containers or other sub-entities in the chassis are reported created by this trap, the NMS must read thes… | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.124002 | NotificationspeqDeletion | current | This trap is sent every time an entity is deleted. The sub-entities (containers, modules, etc.) are not reported deleted. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.124003 | NotificationspeqStateChange | current | This trap is sent when an entity state is changed. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.124004 | NotificationspeqObjectChange | current | This trap is sent when some object is changed. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126000 | NotificationtransientGainAutoAdjustSpeq | current | Span Equalization Gain auto adjustment is triggered by monitoring LOS clear condition. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126001 | NotificationtransientGainNoAdjustSpeq | current | Span Equalization Gain Not Adjusted. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126002 | NotificationtransientGainAdjustFailedSpeq | current | Span Equalization Gain Adjustment Failed. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126003 | NotificationtransientWaitSpeq | current | Auto Span Equalization is in progress; SPEQ-Server is busy, user must wait then request Span Equalization. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126004 | NotificationtransientDenySpeq | current | Span Equalization request denied; operation could not be performed by the SPEQ-Server | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126005 | NotificationtransientPpcAdoptSpeq | current | PPC is auto calculated based on the adopted Gain for Brown-Field installations. | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126006 | NotificationtransientPpcLimitExceededSpeq | current | Provisioned per-channel power level exceeded the allowable limit | |
| 1.3.6.1.4.1.2544.1.11.4.14.1.0.126007 | NotificationtransientGainDynamicAdjustSpeq | current | Span Equalization Gain auto adjustment is triggered by dynamic optical power drift at Rx of the associated EDFA. | |
| 1.3.6.1.4.1.2544.1.11.4.14.2 | NodespeqConditions | |||
| 1.3.6.1.4.1.2544.1.11.4.14.2.1 | TablespeqConditionSeverityTable | not-accessible | current | This table contains a severity value for each defined standing condition reported by an entity in the NE. |
| 1.3.6.1.4.1.2544.1.11.4.14.2.1.1 | RowspeqConditionSeverityEntry | not-accessible | current | Each entry in the table represents the severity assigned to a condition.' |
| 1.3.6.1.4.1.2544.1.11.4.14.2.1.1.1 | ColumnspeqConditionSeverityType | not-accessible | current | This object identifies the type of alarm. |
| 1.3.6.1.4.1.2544.1.11.4.14.2.1.1.2 | ColumnspeqConditionSeverityValue | read-write | current | This object identifies the severity assigned to this alarm. |
| 1.3.6.1.4.1.2544.1.11.4.14.2.2 | TablespeqCurrentConditionTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.14.2.2.1 | RowspeqCurrentConditionEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.1 | ColumnspeqCurrentConditionType | not-accessible | current | List of all interface conditions |
| 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.2 | ColumnspeqCurrentConditionSeverity | read-only | current | This object identifies the current severity of alarm. |
| 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.3 | ColumnspeqCurrentConditionAffect | read-only | current | This object indicates the service impairment affect of the alarm. |
| 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.4 | ColumnspeqCurrentConditionTimeStamp | read-only | current | Timestamp |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FspR7SpeqConfig | INTEGER { undefined(0), none(1), disable(2), enableGainAdopt(3), enableNoGainAdopt(4) } | current | Auto Span Equalization Configuration |
| FspR7SpeqDisableEnable | INTEGER { undefined(0), enable(1), disable(2) } | current | SPEQ Dynamic Compensation for span optical power variations. |
| FspR7SpeqFarEndConfig | INTEGER { undefined(0), unknown(1), enable(2), disable(3) } | current | Indicating Far-End Auto Span Equalization Configuration. |
| FspR7SpeqOperate | INTEGER { undefined(0), rls(1), opr(2) } | current | When Per-Channel Power (PPC) changes without an SPEQ trigger condition; users could use this command to invoke SPEQ Gain recalculation/setting on the associated EDFA. (SPEQ Gain recalculation shall inherit the current v… |
| FspR7SpeqOperateCaps | BITS { capUndefined(0), capRls(1), capOpr(2) } | current | When Per-Channel Power (PPC) changes without an SPEQ trigger condition; users could use this command to invoke SPEQ Gain recalculation/setting on the associated EDFA. (SPEQ Gain recalculation shall inherit the current v… |
| FspR7SpeqOptLineService | INTEGER { undefined(0), addDrop(1), passThrough(2), hybrid(3) } | current | This parameter provides optical channel service types that are being transported to/from an optical line. See related generic group or YP for the specific usage and/or explanation. |
| FspR7SpeqPpcLimit | INTEGER { undefined(0), four(1), one(2), seven(3) } | current | Per-channel optical power limit value for supporting the maximum channel operation of a given optical link. PPC-LIMIT for an optical link with the 40 or the 80 max channel operations would be 4dBm or 1dBm respectively. … |
| FspR7SpeqQualify | INTEGER { undefined(0), preAmp(1), boosterAmp(2), lineAmp(3) } | current | Determines if the qualified EDFA has been configured as Per-Amp, Booster-Amp, Line-Amp. Qualification process requires valid fiber-map. |
| FspR7SpeqStandingConditionTypes | INTEGER { undefined(0), oosDisabledSpeq(120000), oosMaintenanceSpeq(120002), messageLossSpeq(120004), oscFiberMissingSpeq(120005), optLowSpeq(120006), ppcOutOfRangeSpeq(120007), gainTooHighSpeq(120008), gainTooLowSpeq(120009), gainAdoptFailedSpeq(120010) } | current | |
| FspR7SpeqStatus | INTEGER { undefined(0), none(1), inProgress(2), lockedOut(3) } | current | Auto Span Equalization Status |