G3-AVAYA-MIB
4457 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | enterprises MODULE-IDENTITY |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6889 | Nodeavaya | |||
| 1.3.6.1.4.1.6889.1 | Nodeproducts | |||
| 1.3.6.1.4.1.6889.1.8 | Nodedef-products | |||
| 1.3.6.1.4.1.6889.1.8.1 | Nodeg3-products | |||
| 1.3.6.1.4.1.6889.1.8.1.40 | Nodedefinity-proxy | |||
| 1.3.6.1.4.1.6889.1.8.1.41 | Nodedefinity-g3 | |||
| 1.3.6.1.4.1.6889.1.8.1.42 | Nodedefinity-ecs | |||
| 1.3.6.1.4.1.6889.1.8.1.43 | Nodedefinity-mcu | |||
| 1.3.6.1.4.1.6889.1.8.1.45 | Nodeval-board | |||
| 1.3.6.1.4.1.6889.1.8.1.46 | Nodeclan-board | |||
| 1.3.6.1.4.1.6889.1.8.1.47 | Nodedefinity-one | |||
| 1.3.6.1.4.1.6889.1.8.1.48 | Nodedefinity-ip600 | |||
| 1.3.6.1.4.1.6889.1.8.1.49 | Nodeavaya-s8700m | |||
| 1.3.6.1.4.1.6889.1.8.1.50 | Nodeavaya-s8300 | |||
| 1.3.6.1.4.1.6889.1.8.1.51 | Nodeavaya-s8700i | |||
| 1.3.6.1.4.1.6889.1.8.1.52 | Nodeavaya-s8500 | |||
| 1.3.6.1.4.1.6889.1.8.1.53 | Nodecrossfire-board | |||
| 1.3.6.1.4.1.6889.1.8.1.55 | Nodeblade-server | |||
| 1.3.6.1.4.1.6889.1.8.1.56 | Nodeavaya-s8400 | |||
| 1.3.6.1.4.1.6889.1.8.1.57 | Nodecm-on-xen | |||
| 1.3.6.1.4.1.6889.1.8.1.58 | Nodeavaya-aura-cm | |||
| 1.3.6.1.4.1.6889.1.8.1.59 | Nodeavaya-aura-cm-vm | |||
| 1.3.6.1.4.1.6889.2 | Nodemibs | |||
| 1.3.6.1.4.1.6889.2.8 | Nodedefinity | |||
| 1.3.6.1.4.1.6889.2.8.1 | Nodeg3-mib | |||
| 1.3.6.1.4.1.6889.2.8.1.1 | Nodeg3connect | |||
| 1.3.6.1.4.1.6889.2.8.1.1.1 | Scalarg3connectState | read-write | mandatory | The current state of the switch connection; this object cat be set to 'off' to disable the connection and can be set to 'init' to re-initialize the connection.… |
| 1.3.6.1.4.1.6889.2.8.1.1.2 | Scalarg3connectTimeUp | read-only | mandatory | The elapsed time since the connection was established |
| 1.3.6.1.4.1.6889.2.8.1.1.3 | Scalarg3connectTimeUnused | read-only | mandatory | The elapsed time since the connection was last used |
| 1.3.6.1.4.1.6889.2.8.1.1.4 | Scalarg3connectAttempts | read-only | mandatory | The number of connection attempts |
| 1.3.6.1.4.1.6889.2.8.1.1.5 | Scalarg3connectSuccess | read-only | mandatory | The number of successful connections |
| 1.3.6.1.4.1.6889.2.8.1.1.6 | Scalarg3connectRequests | read-only | mandatory | The number of switch data requests |
| 1.3.6.1.4.1.6889.2.8.1.1.7 | Scalarg3connectResponses | read-only | mandatory | The number of switch data responses |
| 1.3.6.1.4.1.6889.2.8.1.1.8 | Scalarg3connectErrors | read-only | mandatory | The number of switch connection errors |
| 1.3.6.1.4.1.6889.2.8.1.1.9 | Scalarg3connectQueued | read-only | mandatory | The number switch requests in the input queue |
| 1.3.6.1.4.1.6889.2.8.1.1.10 | Scalarg3connectDelay | read-only | mandatory | The expected delay in retrieving switch data |
| 1.3.6.1.4.1.6889.2.8.1.1.11 | Scalarg3connectAlarmForward | read-write | mandatory | This object serves as a flag to indicate if a failure has occured in forwarding alarms received from the switch on to another destination. |
| 1.3.6.1.4.1.6889.2.8.1.1.12 | Scalarg3connectTimeReset | read-write | mandatory | The elapsed time since the connection counters were last reset. Setting this object to zero will reset the counters. |
| 1.3.6.1.4.1.6889.2.8.1.1.13 | Scalarg3connectType | read-only | mandatory | The type of the switch connection; it is either 'static' which will stay up continuously or 'dynamic' which will be dropped after the connection is idle for a … |
| 1.3.6.1.4.1.6889.2.8.1.1.14 | Scalarg3connectTimeout | read-only | mandatory | The number of idle minutes a 'dynamic' connection will stay connected before being dropped. For a 'static' connection this field is not applicable an contains … |
| 1.3.6.1.4.1.6889.2.8.1.2 | Nodeg3vintage | |||
| 1.3.6.1.4.1.6889.2.8.1.2.1 | Scalarg3vintageTage | read-only | mandatory | The number of timeticks since the vintage data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3vintageTintvl object allo… |
| 1.3.6.1.4.1.6889.2.8.1.2.2 | Scalarg3vintageTintvl | read-write | mandatory | An object containing the interval for which the vintage data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request f… |
| 1.3.6.1.4.1.6889.2.8.1.2.3 | Scalarg3vintageTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.2.4 | Scalarg3vintageTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.2.5 | Scalarg3vintageSpeArelease | read-only | mandatory | A DisplayString Object that contains the release number for SPE A. |
| 1.3.6.1.4.1.6889.2.8.1.2.6 | Scalarg3vintageSpeBrelease | read-only | mandatory | A DisplayString Object that contains the release number for SPE B. |
| 1.3.6.1.4.1.6889.2.8.1.2.7 | Scalarg3vintageCurMemory | read-only | mandatory | A DisplayString Object that contains the current memory configuration. |
| 1.3.6.1.4.1.6889.2.8.1.2.8 | Scalarg3vintageSpeAupID | read-only | mandatory | A DisplayString Object that contains the update identifier for SPE A. |
| 1.3.6.1.4.1.6889.2.8.1.2.9 | Scalarg3vintageSpeBupID | read-only | mandatory | A DisplayString Object that contains the update identifier for SPE B. |
| 1.3.6.1.4.1.6889.2.8.1.2.10 | Scalarg3vintageSpeAupState1 | read-only | mandatory | A DisplayString Object that contains the first part of the update state for SPE A. |
| 1.3.6.1.4.1.6889.2.8.1.2.11 | Scalarg3vintageSpeBupState1 | read-only | mandatory | A DisplayString Object that contains the first part of the update state for SPE B. |
| 1.3.6.1.4.1.6889.2.8.1.2.12 | Scalarg3vintageSpeAupState2 | read-only | mandatory | A DisplayString Object that contains the second part of the update state for SPE A. |
| 1.3.6.1.4.1.6889.2.8.1.2.13 | Scalarg3vintageSpeBupState2 | read-only | mandatory | A DisplayString Object that contains the second part of the update state for SPE B. |
| 1.3.6.1.4.1.6889.2.8.1.2.14 | Scalarg3vintageVSPacketBus | read-only | mandatory | A DisplayString Object that contains the a flag indicating whether packet bus is available on a G3vs system. |
| 1.3.6.1.4.1.6889.2.8.1.2.15 | Scalarg3vintageOfferCategory | read-only | mandatory | A DisplayString Object that contains the current Offer Category ('A', 'B', or '?'). |
| 1.3.6.1.4.1.6889.2.8.1.2.16 | Scalarg3vintageATMPnc | read-only | mandatory | A DisplayString Object that contains the current ATM PNC Customer Option ('y', or 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.2.17 | Scalarg3vintageProductID | read-only | mandatory | A DisplayString Object that contains the Product Identification number for the Definity switch. |
| 1.3.6.1.4.1.6889.2.8.1.2.18 | Scalarg3vintageOSSNumber1 | read-only | mandatory | A DisplayString Object that contains the first OSS telephone number. |
| 1.3.6.1.4.1.6889.2.8.1.2.19 | Scalarg3vintageAbbAlmRep1 | read-only | mandatory | A DisplayString Object that contains the Abbreviated Alarm Report for the first OSS Number ('y' or 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.2.20 | Scalarg3vintageOSSNumber2 | read-only | mandatory | A DisplayString Object that contains the second OSS telephone number. |
| 1.3.6.1.4.1.6889.2.8.1.2.21 | Scalarg3vintageAbbAlmRep2 | read-only | mandatory | A DisplayString Object that contains the Abbreviated Alarm Report for the second OSS Number ('y' or 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.2.22 | Scalarg3vintageAOActivate | read-only | mandatory | A DisplayString Object that contains Alarm Origination Activation status ('y' or 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.2.23 | Scalarg3vintageCANotify | read-only | mandatory | A DisplayString Object that contains Cleared Alarm Notification status ('y' or 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.2.24 | Scalarg3vintageResNotify | read-only | mandatory | A DisplayString Object that contains Restart Notification status ('y' or 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.2.25 | Scalarg3vintagePbxID | read-only | mandatory | An INTEGER Object containing the Local Node Number for pre R11 |
| 1.3.6.1.4.1.6889.2.8.1.2.26 | Scalarg3vintageACAFlag | read-only | mandatory | A DisplayString Object that contains the current ACA Enabled Option ('y', or 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.2.27 | Scalarg3vintageIPAddress1 | read-only | mandatory | An object that contains the first octet of IP address |
| 1.3.6.1.4.1.6889.2.8.1.2.28 | Scalarg3vintageIPAddress2 | read-only | mandatory | An object that contains the second octet of IP address |
| 1.3.6.1.4.1.6889.2.8.1.2.29 | Scalarg3vintageIPAddress3 | read-only | mandatory | An object that contains the third octet of IP address |
| 1.3.6.1.4.1.6889.2.8.1.2.30 | Scalarg3vintageIPAddress4 | read-only | mandatory | An object that contains the fourth octet of IP address |
| 1.3.6.1.4.1.6889.2.8.1.2.31 | Scalarg3vintagePortNetSupport | read-only | mandatory | An object that contains |
| 1.3.6.1.4.1.6889.2.8.1.2.32 | Scalarg3vintageLocalSpareProc | read-only | mandatory | An object that contains |
| 1.3.6.1.4.1.6889.2.8.1.2.33 | Scalarg3vintagePlatform | read-only | mandatory | An object that contains |
| 1.3.6.1.4.1.6889.2.8.1.2.34 | Scalarg3vintageLocalNodeNbr | read-only | mandatory | An INTEGER Object containing the Local Node Number on R11 and beyond |
| 1.3.6.1.4.1.6889.2.8.1.2.35 | Scalarg3vintageIPStaReg | read-only | mandatory | An object that contains the number of current registered IP stations on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.36 | Scalarg3vintageIPStaAvail | read-only | mandatory | An object that contains the number of concurrent IP stations still available on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.37 | Scalarg3vintageIPStaLimit | read-only | mandatory | An object that contains the total system limit of concurrent IP stations on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.38 | Scalarg3vintageIPAttdReg | read-only | mandatory | An object that contains the number of current registered IP attendant consoles on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.39 | Scalarg3vintageIPAttdAvail | read-only | mandatory | An object that contains the number of concurrent IP attendant consoles still available on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.40 | Scalarg3vintageIPAttdLimit | read-only | mandatory | An object that contains the total system limit of concurrent IP attendant consoles on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.41 | Scalarg3vintageRemoteOffReg | read-only | mandatory | An object that contains the number of current registered remote office stations on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.42 | Scalarg3vintageRemoteOffAvail | read-only | mandatory | An object that contains the number of concurrent remote office stations still available on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.2.43 | Scalarg3vintageRemoteOffLimit | read-only | mandatory | An object that contains the total system limit of concurrent remote office stations on the media server. |
| 1.3.6.1.4.1.6889.2.8.1.3 | Nodeg3config | |||
| 1.3.6.1.4.1.6889.2.8.1.3.1 | Scalarg3configTage | read-only | mandatory | The number of timeticks since the configuration data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3configTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.3.2 | Scalarg3configTintvl | read-write | mandatory | An object containing the interval for which the configuration data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.3.3 | Scalarg3configTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.3.4 | Scalarg3configTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.3.5 | Scalarg3configTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.3.6 | Tableg3configTable | not-accessible | mandatory | A list of g3config entries. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1 | Rowg3configEntry | not-accessible | mandatory | A g3config entry containing objects of the g3config information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.1 | Columng3configBoardNum | read-only | mandatory | A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carr… |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.2 | Columng3configIndex | read-only | mandatory | An INTEGER object containing an index numbering the config entry for the board specified in BoardNum. This object along with BoardNum will serve as the instanc… |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.3 | Columng3configBoardType | read-only | mandatory | A DisplayString Object that contains a text description of the type of board. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.4 | Columng3configCode | read-only | mandatory | A DisplayString Object that contains the code that defines the type of board. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.5 | Columng3configSuffix | read-only | mandatory | A DisplayString Object that contains the suffix to the code (object configCode) that defines the type of board. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.6 | Columng3configVintage | read-only | mandatory | An DisplayString Object that contains the vintage of the board. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.7 | Columng3configPort1 | read-only | mandatory | A DisplayString Object that specifies the assignment of the port. A string representing an integer identical to the port number indicates that the port is assi… |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.8 | Columng3configPort2 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.9 | Columng3configPort3 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.10 | Columng3configPort4 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.11 | Columng3configPort5 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.12 | Columng3configPort6 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.13 | Columng3configPort7 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.14 | Columng3configPort8 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.15 | Columng3configPort9 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.16 | Columng3configPort10 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.17 | Columng3configPort11 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.18 | Columng3configPort12 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.19 | Columng3configPort13 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.20 | Columng3configPort14 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.21 | Columng3configPort15 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.22 | Columng3configPort16 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.23 | Columng3configPort17 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.24 | Columng3configPort18 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.25 | Columng3configPort19 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.26 | Columng3configPort20 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.27 | Columng3configPort21 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.28 | Columng3configPort22 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.29 | Columng3configPort23 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.30 | Columng3configPort24 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.31 | Columng3configPort25 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.32 | Columng3configPort26 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.33 | Columng3configPort27 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.34 | Columng3configPort28 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.35 | Columng3configPort29 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.36 | Columng3configPort30 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.37 | Columng3configPort31 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.3.6.1.38 | Columng3configPort32 | read-only | mandatory | See DESCRIPTION of configPort1. |
| 1.3.6.1.4.1.6889.2.8.1.4 | Nodeg3alarms | |||
| 1.3.6.1.4.1.6889.2.8.1.4.1 | Scalarg3alarmsTage | read-only | mandatory | The number of timeticks since the alarm data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3alarmsTintvl object allows … |
| 1.3.6.1.4.1.6889.2.8.1.4.2 | Scalarg3alarmsTintvl | read-write | mandatory | An object containing the interval for which the alarm data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for… |
| 1.3.6.1.4.1.6889.2.8.1.4.3 | Scalarg3alarmsTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.4.4 | Scalarg3alarmsTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.4.5 | Scalarg3alarmsTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.4.6 | Tableg3alarmsTable | not-accessible | mandatory | A list of g3alarms entries. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1 | Rowg3alarmsEntry | not-accessible | mandatory | A g3alarms entry containing objects of the g3alarms information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.1 | Columng3alarmsPort | read-only | mandatory | A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port number is as follows: cabinet(01-44):carrie… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.2 | Columng3alarmsIndex | read-only | mandatory | An INTEGER object containing an index numbering the alarm entry for the port specified in alarmsPort. This object along with alarmsPort will serve as the insta… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.3 | Columng3alarmsMaintName | read-only | mandatory | A DisplayString Object containing the Maintenance Object Name. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.4 | Columng3alarmsOnBrd | read-only | mandatory | A DisplayString Object specifying whether or not the alarm indicates an on board fault. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.5 | Columng3alarmsAltName | read-only | mandatory | A DisplayString Object containing the alternate name of the alarmed object. Alternate names can consist of extension numbers, trunk group numbers or other iden… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.6 | Columng3alarmsAlarmType | read-only | mandatory | A DisplayString Object specifying the alarm type (or severity). |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.7 | Columng3alarmsSvcState | read-only | mandatory | A DisplayString Object specifying the service state of the alarmed object. Service States can be IN or OUT {any others?}. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.8 | Columng3alarmsAck | read-only | mandatory | A DisplayString Object indicating whether or not the alarm has been acknowledged by the alarm receiver. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.9 | Columng3alarmsMonthAlrmd | read-only | mandatory | A DisplayString Object containing the month the alarm was created. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.10 | Columng3alarmsDayAlrmd | read-only | mandatory | A DisplayString Object containing the day the alarm was created. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.11 | Columng3alarmsHourAlrmd | read-only | mandatory | A DisplayString Object containing the hour the alarm was created. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.12 | Columng3alarmsMinAlrmd | read-only | mandatory | A DisplayString Object containing the minute the alarm was created. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.13 | Columng3alarmsMonthRslvd | read-only | mandatory | A DisplayString Object containing the month the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.14 | Columng3alarmsDayRslvd | read-only | mandatory | A DisplayString Object containing the day the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. … |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.15 | Columng3alarmsHourRslvd | read-only | mandatory | A DisplayString Object containing the hour the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms.… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.16 | Columng3alarmsMinRslvd | read-only | mandatory | A DisplayString Object containing the minute the alarm was resolved. This object will always contain the value (00) because this table only contains open alarm… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.17 | Columng3alarmsAlarmNumber | read-only | mandatory | A DisplayString Object containing the Alarm Number of the alarm. This is just a place holder for a field populated in alarm traps. Nothing is populated in this… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.18 | Columng3alarmsProductID | read-only | mandatory | A DisplayString Object containing the Product ID of the alarm. This is just a place holder for a field populated in alarm traps. Nothing is populated in this f… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.19 | Columng3alarmsAck2 | read-only | mandatory | Another DisplayString Object indicating whether or not the alarm has been acknowledged. |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.20 | Columng3alarmsSrcIPAddr | read-only | mandatory | A DisplayString Object containing the IP address that is the source of a security attack. This is just a place holder for a field populated in alarm traps. Not… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.21 | Columng3alarmsSrcMACAddr | read-only | mandatory | A DisplayString Object containing the IP address that is the MAC address that is the source of a security attack. This is just a place holder for a field popul… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.22 | Columng3alarmsDestIPAddr | read-only | mandatory | A DisplayString Object containing the IP address that is the destination of a security attack. This is just a place holder for a field populated in alarm traps… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.23 | Columng3alarmsDestPort | read-only | mandatory | A DisplayString Object containing the IP port that is the destination of a security attack. This is just a place holder for a field populated in alarm traps. N… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.24 | Columng3alarmsProtocol | read-only | mandatory | A DisplayString Object containing the protocol that a security attack is utilizing. This is just a place holder for a field populated in alarm traps. Nothing i… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.25 | Columng3alarmsCount | read-only | mandatory | A DisplayString Object containing the number of occurrences at the time that a trap was sent during a security attack. This is just a place holder for a field … |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.26 | Columng3alarmsIPAddress | read-only | mandatory | A DisplayString Object containing the IP address of the server. This is just a place holder for a field populated in alarm traps. Nothing is populated in this … |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.27 | Columng3alarmsCategory | read-only | mandatory | A DisplayString Object containing the the alarm category that the alarm belongs to. This is just a place holder for a field populated in alarm traps. Nothing i… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.28 | Columng3alarmsErrorCodes | read-only | mandatory | A DisplayString Object containing a list of up to 16 error codes that could have caused the alarm. Not all of the error codes may be the actually cause. This i… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.29 | Columng3alarmsViolationType | read-only | mandatory | A DisplayString Object containing the violation type associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothi… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.30 | Columng3alarmsCode | read-only | mandatory | A DisplayString Object containing the code associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is popu… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.31 | Columng3alarmsData | read-only | mandatory | A DisplayString Object containing the data field associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing i… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.32 | Columng3alarmsICMPType | read-only | mandatory | A DisplayString Object containing the ICMP type associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is… |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.33 | Columng3alarmsEventID | read-only | mandatory | A DisplayString Object containing the event ID associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is … |
| 1.3.6.1.4.1.6889.2.8.1.4.6.1.34 | Columng3alarmsStatus | read-only | mandatory | A DisplayString Object containing the status associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is po… |
| 1.3.6.1.4.1.6889.2.8.1.5 | Nodeg3errors | |||
| 1.3.6.1.4.1.6889.2.8.1.5.1 | Scalarg3errorsTage | read-only | mandatory | The number of timeticks since the error log was last extracted from the switch by the G3 Proxy Agent. This object along with the g3errorsTintvl object allows t… |
| 1.3.6.1.4.1.6889.2.8.1.5.2 | Scalarg3errorsTintvl | read-write | mandatory | An object containing the interval for which the error data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for… |
| 1.3.6.1.4.1.6889.2.8.1.5.3 | Scalarg3errorsTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.5.4 | Scalarg3errorsTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.5.5 | Scalarg3errorsTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.5.6 | Tableg3errorsTable | not-accessible | mandatory | A list of g3errors entries. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1 | Rowg3errorsEntry | not-accessible | mandatory | A g3errors entry containing objects of the g3errors information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.1 | Columng3errorsPort | read-only | mandatory | A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carr… |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.2 | Columng3errorsIndex | read-only | mandatory | An INTEGER object containing an index numbering the error entry for the port specified in errorsPort. This object along with errorsPort will serve as the insta… |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.3 | Columng3errorsMaintName | read-only | mandatory | A DisplayString Object containing the Maintenance Object Name. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.4 | Columng3errorsAltName | read-only | mandatory | A DisplayString Object containing the alternate name of the errored object. Alternate names can consist of extension numbers, trunk group numbers or other iden… |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.5 | Columng3errorsErrType | read-only | mandatory | A DisplayString Object containing a specific error type numeric code used to determine the type of error. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.6 | Columng3errorsAuxData | read-only | mandatory | A DisplayString Object containing an auxiliary numeric code used with the errType to troubleshoot the problem. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.7 | Columng3errorsMonthFirst | read-only | mandatory | A DisplayString Object containing the month that the error first occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.8 | Columng3errorsDayFirst | read-only | mandatory | A DisplayString Object containing the day that the error first occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.9 | Columng3errorsHourFirst | read-only | mandatory | A DisplayString Object containing the hour that the error first occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.10 | Columng3errorsMinFirst | read-only | mandatory | A DisplayString Object containing the minute that the error first occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.11 | Columng3errorsMonthLast | read-only | mandatory | A DisplayString Object containing the month that the error last occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.12 | Columng3errorsDayLast | read-only | mandatory | A DisplayString Object containing the day that the error last occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.13 | Columng3errorsHourLast | read-only | mandatory | A DisplayString Object containing the hour that the error last occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.14 | Columng3errorsMinLast | read-only | mandatory | A DisplayString Object containing the minute that the error last occurred. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.15 | Columng3errorsErrCnt | read-only | mandatory | A DisplayString Object containing a numeric count of the occurrences of the error. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.16 | Columng3errorsErrRt | read-only | mandatory | A DisplayString Object containing the error rate occurrences of the error. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.17 | Columng3errorsRtperHr | read-only | mandatory | A DisplayString Object containing the error rate per hour. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.18 | Columng3errorsAlSt | read-only | mandatory | A DisplayString Object containing the alarm state of the error. |
| 1.3.6.1.4.1.6889.2.8.1.5.6.1.19 | Columng3errorsAck | read-only | mandatory | A DisplayString Object indicating whether or not the alarm has been acknowledged by the alarm receiver. |
| 1.3.6.1.4.1.6889.2.8.1.6 | Nodeg3health | |||
| 1.3.6.1.4.1.6889.2.8.1.6.1 | Scalarg3healthTage | read-only | mandatory | The number of timeticks since the health data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3healthTintvl object allows… |
| 1.3.6.1.4.1.6889.2.8.1.6.2 | Scalarg3healthTintvl | read-write | mandatory | An object containing the interval for which the health data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request fo… |
| 1.3.6.1.4.1.6889.2.8.1.6.3 | Scalarg3healthTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.6.4 | Scalarg3healthTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.6.5 | Scalarg3healthMajor | read-only | mandatory | A Gauge object containing the number of logged major alarms. |
| 1.3.6.1.4.1.6889.2.8.1.6.6 | Scalarg3healthMinor | read-only | mandatory | A Gauge object containing the number of logged minor alarms. |
| 1.3.6.1.4.1.6889.2.8.1.6.7 | Scalarg3healthWarning | read-only | mandatory | A Gauge object containing the number of logged warnings. |
| 1.3.6.1.4.1.6889.2.8.1.6.8 | Scalarg3healthTrkBusy | read-only | mandatory | A Gauge object containing the number of trunks busied out. |
| 1.3.6.1.4.1.6889.2.8.1.6.9 | Scalarg3healthStnBusy | read-only | mandatory | A Gauge object containing the number of stations busied out. |
| 1.3.6.1.4.1.6889.2.8.1.6.10 | Scalarg3healthOthBusy | read-only | mandatory | A Gauge object containing the number of objects busied out except trunks and stations. |
| 1.3.6.1.4.1.6889.2.8.1.6.11 | Scalarg3healthStaticOcc | read-only | mandatory | A Gauge object containing the proportion of the CPU which is currently dedicated to high priority items (e.g. the operating system). This percentage is rounded… |
| 1.3.6.1.4.1.6889.2.8.1.6.12 | Scalarg3healthCallpOcc | read-only | mandatory | A Gauge object containing the proportion of the CPU which is currently dedicated to call processing. This occupancy has priority over SM and IDLE occupancy cat… |
| 1.3.6.1.4.1.6889.2.8.1.6.13 | Scalarg3healthSysMgmtOcc | read-only | mandatory | A Gauge object containing the proportion of the CPU which is currently dedicated to system management or periodic and scheduled maintenance. Therefore, if ther… |
| 1.3.6.1.4.1.6889.2.8.1.6.14 | Scalarg3healthIdleOcc | read-only | mandatory | A Gauge object containing the proportion of the CPU which is currently available for use. This percentage is rounded to the nearest integer, therefore a percen… |
| 1.3.6.1.4.1.6889.2.8.1.6.15 | Scalarg3healthActiveSPE | read-only | mandatory | A DisplayString Object containing the active SPE (A or B) followed by the interchange mode (auto or lock). |
| 1.3.6.1.4.1.6889.2.8.1.6.16 | Scalarg3healthActivePNC | read-only | mandatory | A DisplayString Object containing the active PNC (A-PNC or B-PNC) followed by the interchange mode (auto or lock). |
| 1.3.6.1.4.1.6889.2.8.1.6.17 | Scalarg3healthDupSPE | read-only | mandatory | A DisplayString Object containing the duplication status of the SPE (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.6.18 | Scalarg3healthDupPNC | read-only | mandatory | A DisplayString Object containing the duplication status of the PNC (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.6.19 | Scalarg3healthPower | read-only | mandatory | A DisplayString Object containing the power source for the SPE (commercial or backup). |
| 1.3.6.1.4.1.6889.2.8.1.6.20 | Scalarg3healthTimeSource | read-only | mandatory | A DisplayString Object containing the time source for the SPE (external, internal, primary, secondary, or local). |
| 1.3.6.1.4.1.6889.2.8.1.6.21 | Scalarg3healthLogins | read-only | mandatory | A Gauge object containing the number of active logins. |
| 1.3.6.1.4.1.6889.2.8.1.6.22 | Scalarg3healthCab1 | read-only | mandatory | An INTEGER Object containing the number of the 1st cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.23 | Scalarg3healthCab2 | read-only | mandatory | An INTEGER Object containing the number of the 2nd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.24 | Scalarg3healthCab3 | read-only | mandatory | An INTEGER Object containing the number of the 3rd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.25 | Scalarg3healthCab4 | read-only | mandatory | An INTEGER Object containing the number of the 4th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.26 | Scalarg3healthCab5 | read-only | mandatory | An INTEGER Object containing the number of the 5th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.27 | Scalarg3healthCab6 | read-only | mandatory | An INTEGER Object containing the number of the 6th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.28 | Scalarg3healthCab7 | read-only | mandatory | An INTEGER Object containing the number of the 7th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.29 | Scalarg3healthCab8 | read-only | mandatory | An INTEGER Object containing the number of the 8th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.30 | Scalarg3healthCab9 | read-only | mandatory | An INTEGER Object containing the number of the 9th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.31 | Scalarg3healthCab10 | read-only | mandatory | An INTEGER Object containing the number of the 10th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.32 | Scalarg3healthCab11 | read-only | mandatory | An INTEGER Object containing the number of the 11th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.33 | Scalarg3healthCab12 | read-only | mandatory | An INTEGER Object containing the number of the 12th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.34 | Scalarg3healthCab13 | read-only | mandatory | An INTEGER Object containing the number of the 13th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.35 | Scalarg3healthCab14 | read-only | mandatory | An INTEGER Object containing the number of the 14th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.36 | Scalarg3healthCab15 | read-only | mandatory | An INTEGER Object containing the number of the 15th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.37 | Scalarg3healthPncStat1 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.38 | Scalarg3healthPncStat2 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.39 | Scalarg3healthPncStat3 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.40 | Scalarg3healthPncStat4 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.41 | Scalarg3healthPncStat5 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.42 | Scalarg3healthPncStat6 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.43 | Scalarg3healthPncStat7 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.44 | Scalarg3healthPncStat8 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.45 | Scalarg3healthPncStat9 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.46 | Scalarg3healthPncStat10 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.47 | Scalarg3healthPncStat11 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.48 | Scalarg3healthPncStat12 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.49 | Scalarg3healthPncStat13 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.50 | Scalarg3healthPncStat14 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.51 | Scalarg3healthPncStat15 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.52 | Scalarg3healthCab16 | read-only | mandatory | An INTEGER Object containing the number of the 16th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.53 | Scalarg3healthCab17 | read-only | mandatory | An INTEGER Object containing the number of the 17th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.54 | Scalarg3healthCab18 | read-only | mandatory | An INTEGER Object containing the number of the 18th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.55 | Scalarg3healthCab19 | read-only | mandatory | An INTEGER Object containing the number of the 19th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.56 | Scalarg3healthCab20 | read-only | mandatory | An INTEGER Object containing the number of the 20th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.57 | Scalarg3healthCab21 | read-only | mandatory | An INTEGER Object containing the number of the 21st cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.58 | Scalarg3healthCab22 | read-only | mandatory | An INTEGER Object containing the number of the 22nd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.59 | Scalarg3healthCab23 | read-only | mandatory | An INTEGER Object containing the number of the 23rd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.60 | Scalarg3healthCab24 | read-only | mandatory | An INTEGER Object containing the number of the 24th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.61 | Scalarg3healthCab25 | read-only | mandatory | An INTEGER Object containing the number of the 25th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.62 | Scalarg3healthCab26 | read-only | mandatory | An INTEGER Object containing the number of the 26th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.63 | Scalarg3healthCab27 | read-only | mandatory | An INTEGER Object containing the number of the 27th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.64 | Scalarg3healthCab28 | read-only | mandatory | An INTEGER Object containing the number of the 28th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.65 | Scalarg3healthCab29 | read-only | mandatory | An INTEGER Object containing the number of the 29th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.66 | Scalarg3healthCab30 | read-only | mandatory | An INTEGER Object containing the number of the 30th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.67 | Scalarg3healthPncStat16 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.68 | Scalarg3healthPncStat17 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.69 | Scalarg3healthPncStat18 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.70 | Scalarg3healthPncStat19 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.71 | Scalarg3healthPncStat20 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.72 | Scalarg3healthPncStat21 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.73 | Scalarg3healthPncStat22 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.74 | Scalarg3healthPncStat23 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.75 | Scalarg3healthPncStat24 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.76 | Scalarg3healthPncStat25 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.77 | Scalarg3healthPncStat26 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.78 | Scalarg3healthPncStat27 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.79 | Scalarg3healthPncStat28 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.80 | Scalarg3healthPncStat29 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.81 | Scalarg3healthPncStat30 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.82 | Scalarg3healthCab31 | read-only | mandatory | An INTEGER Object containing the number of the 31st cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.83 | Scalarg3healthCab32 | read-only | mandatory | An INTEGER Object containing the number of the 32nd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.84 | Scalarg3healthCab33 | read-only | mandatory | An INTEGER Object containing the number of the 33rd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.85 | Scalarg3healthCab34 | read-only | mandatory | An INTEGER Object containing the number of the 34th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.86 | Scalarg3healthCab35 | read-only | mandatory | An INTEGER Object containing the number of the 35th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.87 | Scalarg3healthCab36 | read-only | mandatory | An INTEGER Object containing the number of the 36th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.88 | Scalarg3healthCab37 | read-only | mandatory | An INTEGER Object containing the number of the 37th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.89 | Scalarg3healthCab38 | read-only | mandatory | An INTEGER Object containing the number of the 38th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.90 | Scalarg3healthCab39 | read-only | mandatory | An INTEGER Object containing the number of the 39th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.91 | Scalarg3healthCab40 | read-only | mandatory | An INTEGER Object containing the number of the 40th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.92 | Scalarg3healthCab41 | read-only | mandatory | An INTEGER Object containing the number of the 41st cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.93 | Scalarg3healthCab42 | read-only | mandatory | An INTEGER Object containing the number of the 42nd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.94 | Scalarg3healthCab43 | read-only | mandatory | An INTEGER Object containing the number of the 43rd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.95 | Scalarg3healthCab44 | read-only | mandatory | An INTEGER Object containing the number of the 44th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.96 | Scalarg3healthPncStat31 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.97 | Scalarg3healthPncStat32 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.98 | Scalarg3healthPncStat33 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.99 | Scalarg3healthPncStat34 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.100 | Scalarg3healthPncStat35 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.101 | Scalarg3healthPncStat36 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.102 | Scalarg3healthPncStat37 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.103 | Scalarg3healthPncStat38 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.104 | Scalarg3healthPncStat39 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.105 | Scalarg3healthPncStat40 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.106 | Scalarg3healthPncStat41 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.107 | Scalarg3healthPncStat42 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.108 | Scalarg3healthPncStat43 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.109 | Scalarg3healthPncStat44 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.110 | Scalarg3healthCab45 | read-only | mandatory | An INTEGER Object containing the number of the 45th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.111 | Scalarg3healthCab46 | read-only | mandatory | An INTEGER Object containing the number of the 46th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.112 | Scalarg3healthCab47 | read-only | mandatory | An INTEGER Object containing the number of the 47th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.113 | Scalarg3healthCab48 | read-only | mandatory | An INTEGER Object containing the number of the 48th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.114 | Scalarg3healthCab49 | read-only | mandatory | An INTEGER Object containing the number of the 49th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.115 | Scalarg3healthCab50 | read-only | mandatory | An INTEGER Object containing the number of the 50th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.116 | Scalarg3healthCab51 | read-only | mandatory | An INTEGER Object containing the number of the 51st cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.117 | Scalarg3healthCab52 | read-only | mandatory | An INTEGER Object containing the number of the 52nd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.118 | Scalarg3healthCab53 | read-only | mandatory | An INTEGER Object containing the number of the 53rd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.119 | Scalarg3healthCab54 | read-only | mandatory | An INTEGER Object containing the number of the 54th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.120 | Scalarg3healthCab55 | read-only | mandatory | An INTEGER Object containing the number of the 55th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.121 | Scalarg3healthCab56 | read-only | mandatory | An INTEGER Object containing the number of the 56th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.122 | Scalarg3healthCab57 | read-only | mandatory | An INTEGER Object containing the number of the 57th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.123 | Scalarg3healthCab58 | read-only | mandatory | An INTEGER Object containing the number of the 58th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.124 | Scalarg3healthCab59 | read-only | mandatory | An INTEGER Object containing the number of the 59th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.125 | Scalarg3healthCab60 | read-only | mandatory | An INTEGER Object containing the number of the 60th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.126 | Scalarg3healthCab61 | read-only | mandatory | An INTEGER Object containing the number of the 61st cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.127 | Scalarg3healthCab62 | read-only | mandatory | An INTEGER Object containing the number of the 62nd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.128 | Scalarg3healthCab63 | read-only | mandatory | An INTEGER Object containing the number of the 63rd cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.129 | Scalarg3healthCab64 | read-only | mandatory | An INTEGER Object containing the number of the 64th cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.6.130 | Scalarg3healthPncStat45 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.131 | Scalarg3healthPncStat46 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.132 | Scalarg3healthPncStat47 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.133 | Scalarg3healthPncStat48 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.134 | Scalarg3healthPncStat49 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.135 | Scalarg3healthPncStat50 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.136 | Scalarg3healthPncStat51 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.137 | Scalarg3healthPncStat52 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.138 | Scalarg3healthPncStat53 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.139 | Scalarg3healthPncStat54 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.140 | Scalarg3healthPncStat55 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.141 | Scalarg3healthPncStat56 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.142 | Scalarg3healthPncStat57 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.143 | Scalarg3healthPncStat58 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.144 | Scalarg3healthPncStat59 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.145 | Scalarg3healthPncStat60 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.146 | Scalarg3healthPncStat61 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.147 | Scalarg3healthPncStat62 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.148 | Scalarg3healthPncStat63 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.6.149 | Scalarg3healthPncStat64 | read-only | mandatory | A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field. |
| 1.3.6.1.4.1.6889.2.8.1.7 | Nodeg3cabinet | |||
| 1.3.6.1.4.1.6889.2.8.1.7.1 | Scalarg3cabinetTage | read-only | mandatory | The number of timeticks since the cabinet data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cabinetTintvl object allo… |
| 1.3.6.1.4.1.6889.2.8.1.7.2 | Scalarg3cabinetTintvl | read-write | mandatory | An object containing the interval for which the cabinet data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request f… |
| 1.3.6.1.4.1.6889.2.8.1.7.3 | Scalarg3cabinetTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.7.4 | Scalarg3cabinetTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.7.5 | Scalarg3cabinetTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.7.6 | Tableg3cabinetTable | not-accessible | mandatory | A list of g3cabinet entries. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1 | Rowg3cabinetEntry | not-accessible | mandatory | A g3cabinet entry containing objects of the g3cabinet information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.1 | Columng3cabinetNum | read-only | mandatory | An INTEGER Object that uniquely identifies a cabinet in the system. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.2 | Columng3cabinetType | read-only | mandatory | A DisplayString Object containing the type of cabinet (PPN or EPN). |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.3 | Columng3cabinetLayout | read-only | mandatory | A DisplayString Object containing the cabinet layout. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.4 | Columng3cabinetRoom | read-only | mandatory | A DisplayString Object containing the cabinet room number. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.5 | Columng3cabinetFloor | read-only | mandatory | A DisplayString Object containing the cabinet floor number. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.6 | Columng3cabinetBuilding | read-only | mandatory | A DisplayString Object containing the cabinet building name. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.7 | Columng3cabinetCarAType | read-only | mandatory | A DisplayString Object containing the type of carrier A. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.8 | Columng3cabinetCarAPNN | read-only | mandatory | An INTEGER Object containing the Port Network Number in carrier A. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.9 | Columng3cabinetCarBType | read-only | mandatory | A DisplayString Object containing the type of carrier B. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.10 | Columng3cabinetCarBPNN | read-only | mandatory | An INTEGER Object containing the Port Network Number in carrier B. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.11 | Columng3cabinetCarCType | read-only | mandatory | A DisplayString Object containing the type of carrier C. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.12 | Columng3cabinetCarCPNN | read-only | mandatory | An INTEGER Object containing the Port Network Number in carrier C. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.13 | Columng3cabinetCarDType | read-only | mandatory | A DisplayString Object containing the type of carrier D. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.14 | Columng3cabinetCarDPNN | read-only | mandatory | An INTEGER Object containing the Port Network Number in carrier D. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.15 | Columng3cabinetCarEType | read-only | mandatory | A DisplayString Object containing the type of carrier E. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.16 | Columng3cabinetCarEPNN | read-only | mandatory | An INTEGER Object containing the Port Network Number in carrier E. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.17 | Columng3cabinetSREPN | read-only | mandatory | A DisplayString Object that states whether the EPN is a survivable remote EPN (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.18 | Columng3cabinetSRProductID | read-only | mandatory | A DisplayString Object containing the product ID of the survivable remote EPN (if the EPN is survivable remote). |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.19 | Columng3cabinetRack | read-only | mandatory | A DisplayString Object containing the rack-mount location. |
| 1.3.6.1.4.1.6889.2.8.1.7.6.1.20 | Columng3cabinetLocation | read-only | mandatory | A DisplayString Object containing the network location of the cabinet. |
| 1.3.6.1.4.1.6889.2.8.1.8 | Nodeg3cabtype | |||
| 1.3.6.1.4.1.6889.2.8.1.8.1 | Scalarg3cabtypeTage | read-only | mandatory | The number of timeticks since the cabtype data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cabtypeTintvl object allo… |
| 1.3.6.1.4.1.6889.2.8.1.8.2 | Scalarg3cabtypeTintvl | read-write | mandatory | An object containing the interval for which the cabtype data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request f… |
| 1.3.6.1.4.1.6889.2.8.1.8.3 | Scalarg3cabtypeTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.8.4 | Scalarg3cabtypeTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.8.5 | Scalarg3cabtypeCab1Type | read-only | mandatory | A DisplayString Object containing the type of cabinet 1. |
| 1.3.6.1.4.1.6889.2.8.1.8.6 | Scalarg3cabtypeCab2Type | read-only | mandatory | A DisplayString Object containing the type of cabinet 2. |
| 1.3.6.1.4.1.6889.2.8.1.8.7 | Scalarg3cabtypeCab3Type | read-only | mandatory | A DisplayString Object containing the type of cabinet 3. |
| 1.3.6.1.4.1.6889.2.8.1.9 | Nodeg3cartype | |||
| 1.3.6.1.4.1.6889.2.8.1.9.1 | Scalarg3cartypeTage | read-only | mandatory | The number of timeticks since the cartype data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cartypeTintvl object allo… |
| 1.3.6.1.4.1.6889.2.8.1.9.2 | Scalarg3cartypeTintvl | read-write | mandatory | An object containing the interval for which the cartype data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request f… |
| 1.3.6.1.4.1.6889.2.8.1.9.3 | Scalarg3cartypeTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.9.4 | Scalarg3cartypeTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.9.5 | Scalarg3cartypeCab1CarAType | read-only | mandatory | A DisplayString Object containing the type of cabinet 1/carrier A. |
| 1.3.6.1.4.1.6889.2.8.1.9.6 | Scalarg3cartypeCab1CarBType | read-only | mandatory | A DisplayString Object containing the type of cabinet 1/carrier B. |
| 1.3.6.1.4.1.6889.2.8.1.9.7 | Scalarg3cartypeCab1CarCType | read-only | mandatory | A DisplayString Object containing the type of cabinet 1/carrier C. |
| 1.3.6.1.4.1.6889.2.8.1.9.8 | Scalarg3cartypeCab1CarDType | read-only | mandatory | A DisplayString Object containing the type of cabinet 1/carrier D. |
| 1.3.6.1.4.1.6889.2.8.1.9.9 | Scalarg3cartypeCab1CarEType | read-only | mandatory | A DisplayString Object containing the type of cabinet 1/carrier E. |
| 1.3.6.1.4.1.6889.2.8.1.9.10 | Scalarg3cartypeCab2CarAType | read-only | mandatory | A DisplayString Object containing the type of cabinet 2/carrier A. |
| 1.3.6.1.4.1.6889.2.8.1.9.11 | Scalarg3cartypeCab2CarBType | read-only | mandatory | A DisplayString Object containing the type of cabinet 2/carrier B. |
| 1.3.6.1.4.1.6889.2.8.1.9.12 | Scalarg3cartypeCab2CarCType | read-only | mandatory | A DisplayString Object containing the type of cabinet 2/carrier C. |
| 1.3.6.1.4.1.6889.2.8.1.9.13 | Scalarg3cartypeCab2CarDType | read-only | mandatory | A DisplayString Object containing the type of cabinet 2/carrier D. |
| 1.3.6.1.4.1.6889.2.8.1.9.14 | Scalarg3cartypeCab2CarEType | read-only | mandatory | A DisplayString Object containing the type of cabinet 2/carrier E. |
| 1.3.6.1.4.1.6889.2.8.1.9.15 | Scalarg3cartypeCab3CarAType | read-only | mandatory | A DisplayString Object containing the type of cabinet 3/carrier A. |
| 1.3.6.1.4.1.6889.2.8.1.9.16 | Scalarg3cartypeCab3CarBType | read-only | mandatory | A DisplayString Object containing the type of cabinet 3/carrier B. |
| 1.3.6.1.4.1.6889.2.8.1.9.17 | Scalarg3cartypeCab3CarCType | read-only | mandatory | A DisplayString Object containing the type of cabinet 3/carrier C. |
| 1.3.6.1.4.1.6889.2.8.1.9.18 | Scalarg3cartypeCab3CarDType | read-only | mandatory | A DisplayString Object containing the type of cabinet 3/carrier D. |
| 1.3.6.1.4.1.6889.2.8.1.9.19 | Scalarg3cartypeCab3CarEType | read-only | mandatory | A DisplayString Object containing the type of cabinet 3/carrier E. |
| 1.3.6.1.4.1.6889.2.8.1.10 | Nodeg3port | |||
| 1.3.6.1.4.1.6889.2.8.1.10.1 | Tableg3portTable | not-accessible | mandatory | A list of g3port entries. |
| 1.3.6.1.4.1.6889.2.8.1.10.1.1 | Rowg3portEntry | not-accessible | mandatory | A g3port entry containing objects of the g3port information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.10.1.1.1 | Columng3portNumber | read-only | mandatory | A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carr… |
| 1.3.6.1.4.1.6889.2.8.1.10.1.1.2 | Columng3portEquipType | read-only | mandatory | A DisplayString Object containing the equipment type for the port. |
| 1.3.6.1.4.1.6889.2.8.1.10.1.1.3 | Columng3portId | read-only | mandatory | A DisplayString Object containing the identifier associated with the equipment type. |
| 1.3.6.1.4.1.6889.2.8.1.10.1.1.4 | Columng3portEquipType2 | read-only | mandatory | A DisplayString Object containing the equipment type for a second physical port. |
| 1.3.6.1.4.1.6889.2.8.1.10.1.1.5 | Columng3portId2 | read-only | mandatory | A DisplayString Object containing the identifier associated with the equipment type for a second physical port. |
| 1.3.6.1.4.1.6889.2.8.1.11 | Nodeg3station | |||
| 1.3.6.1.4.1.6889.2.8.1.11.1 | Tableg3stationTable | not-accessible | mandatory | A list of g3station entries. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1 | Rowg3stationEntry | not-accessible | mandatory | A g3station entry containing objects of the g3station information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.1 | Columng3stationExtension | read-only | mandatory | A DisplayString Object that uniquely identifies an administered station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.2 | Columng3stationType | read-only | mandatory | A DisplayString Object containing the station type. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.3 | Columng3stationName | read-only | mandatory | A DisplayString Object containing the name assigned to the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.4 | Columng3stationBuilding | read-only | mandatory | A DisplayString Object containing the building location of the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.5 | Columng3stationFloor | read-only | mandatory | A DisplayString Object containing the floor location of the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.6 | Columng3stationRoom | read-only | mandatory | A DisplayString Object containing the room location of the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.7 | Columng3stationCable | read-only | mandatory | A DisplayString Object containing the cable used by the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.8 | Columng3stationJack | read-only | mandatory | A DisplayString Object containing the jack used by the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.9 | Columng3stationDataExt | read-only | mandatory | A Display String Object containing the extension of the data module attached to the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.10 | Columng3stationDataName | read-only | mandatory | A DisplayString Object containing the name assigned to the data module attached to the station. |
| 1.3.6.1.4.1.6889.2.8.1.11.1.1.11 | Columng3stationPort | read-only | mandatory | A DisplayString Object that uniquely identifies the station port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-2… |
| 1.3.6.1.4.1.6889.2.8.1.12 | Nodeg3statsta | |||
| 1.3.6.1.4.1.6889.2.8.1.12.1 | Tableg3statstaTable | not-accessible | mandatory | A list of g3statsta entries. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1 | Rowg3statstaEntry | not-accessible | mandatory | A g3statsta entry containing objects of the g3statsta information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.1 | Columng3statstaExtension | read-only | mandatory | A DisplayString Object that uniquely identifies an administered station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.2 | Columng3statstaServiceState | read-only | mandatory | A DisplayString Object containing the service state of the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.3 | Columng3statstaMaintBusy | read-only | mandatory | A DisplayString Object that indicates whether the station has been busied for maintenance. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.4 | Columng3statstaConnPort1 | read-only | mandatory | A DisplayString Object that contains the first port connected to the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.5 | Columng3statstaConnPort2 | read-only | mandatory | A DisplayString Object that contains the second port connected to the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.6 | Columng3statstaConnPort3 | read-only | mandatory | A DisplayString Object that contains the third port connected to the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.7 | Columng3statstaConnPort4 | read-only | mandatory | A DisplayString Object that contains the fourth port connected to the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.8 | Columng3statstaConnPort5 | read-only | mandatory | A DisplayString Object that contains the fifth port connected to the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.9 | Columng3statstaConnPort6 | read-only | mandatory | A DisplayString Object that contains the sixth port connected to the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.10 | Columng3statstaSACactive | read-only | mandatory | A DisplayString Object that indicates whether SAC has been activated for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.11 | Columng3statstaCFdestExt | read-only | mandatory | A DisplayString Object that contains the CF Destination Extension for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.12 | Columng3statstaRingCutOff | read-only | mandatory | A DisplayString Object that indicates whether Ring Cut Off has been activated for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.13 | Columng3statstaSerialNbr | read-only | mandatory | A DisplayString Object that contains the serial number for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.14 | Columng3statstaPartID | read-only | mandatory | A DisplayString Object that contains the part id for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.15 | Columng3statstaSwitchPort | read-only | mandatory | A DisplayString Object that contains the switch port for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.16 | Columng3statstaSwitchIPAddr | read-only | mandatory | A DisplayString Object that contains the switch-end IP address for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.17 | Columng3statstaSwitchIPPort | read-only | mandatory | A DisplayString Object that contains the switch-end IP port nbr for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.18 | Columng3statstaSetIPAddr | read-only | mandatory | A DisplayString Object that contains the set-end IP address for the station. |
| 1.3.6.1.4.1.6889.2.8.1.12.1.1.19 | Columng3statstaSetIPPort | read-only | mandatory | A DisplayString Object that contains the set-end IP port nbr for the station. |
| 1.3.6.1.4.1.6889.2.8.1.13 | Nodeg3trunkmem | |||
| 1.3.6.1.4.1.6889.2.8.1.13.1 | Tableg3trunkmemTable | not-accessible | mandatory | A list of g3trunkmem entries. |
| 1.3.6.1.4.1.6889.2.8.1.13.1.1 | Rowg3trunkmemEntry | not-accessible | mandatory | A g3trunkmem entry containing objects of the g3trunkmem information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.13.1.1.1 | Columng3trunkmemGroup | read-only | mandatory | An INTEGER Object that uniquely identifies an administered trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.13.1.1.2 | Columng3trunkmemMember | read-only | mandatory | An INTEGER Object that uniquely identifies a trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.13.1.1.3 | Columng3trunkmemName | read-only | mandatory | A DisplayString Object containing the name assigned to the trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.13.1.1.4 | Columng3trunkmemType | read-only | mandatory | A DisplayString Object containing the Type of the trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.13.1.1.5 | Columng3trunkmemSigGroup | read-only | mandatory | A DisplayString Object containing the Signaling Group assigned to the trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.13.1.1.6 | Columng3trunkmemPort | read-only | mandatory | A DisplayString Object that uniquely identifies the trunk port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22)… |
| 1.3.6.1.4.1.6889.2.8.1.14 | Nodeg3trunksta | |||
| 1.3.6.1.4.1.6889.2.8.1.14.1 | Tableg3trunkstaTable | not-accessible | mandatory | A list of g3trunksta entries. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1 | Rowg3trunkstaEntry | not-accessible | mandatory | A g3trunksta entry containing objects of the g3trunksta information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.1 | Columng3trunkstaTrunkGroup | read-only | mandatory | An INTEGER Object that uniquely identifies an administered trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.2 | Columng3trunkstaMember | read-only | mandatory | An INTEGER Object that uniquely identifies a trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.3 | Columng3trunkstaServiceState | read-only | mandatory | A DisplayString Object containing the service state of the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.4 | Columng3trunkstaMaintBusy | read-only | mandatory | A DisplayString Object that indicates whether the trunk has been busied for maintenance. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.5 | Columng3trunkstaConnPort1 | read-only | mandatory | A DisplayString Object that contains the first port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.6 | Columng3trunkstaConnPort2 | read-only | mandatory | A DisplayString Object that contains the second port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.7 | Columng3trunkstaConnPort3 | read-only | mandatory | A DisplayString Object that contains the third port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.8 | Columng3trunkstaConnPort4 | read-only | mandatory | A DisplayString Object that contains the fourth port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.9 | Columng3trunkstaConnPort5 | read-only | mandatory | A DisplayString Object that contains the fifth port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.10 | Columng3trunkstaConnPort6 | read-only | mandatory | A DisplayString Object that contains the sixth port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.11 | Columng3trunkstaConnPort7 | read-only | mandatory | A DisplayString Object that contains the seventh port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.12 | Columng3trunkstaConnPort8 | read-only | mandatory | A DisplayString Object that contains the eighth port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.14.1.1.13 | Columng3trunkstaConnPort9 | read-only | mandatory | A DisplayString Object that contains the ninth port connected to the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.15 | Nodeg3datamod | |||
| 1.3.6.1.4.1.6889.2.8.1.15.1 | Tableg3datamodTable | not-accessible | mandatory | A list of g3datamod entries. |
| 1.3.6.1.4.1.6889.2.8.1.15.1.1 | Rowg3datamodEntry | not-accessible | mandatory | A g3datamod entry containing objects of the g3datamod information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.15.1.1.1 | Columng3datamodExtension | read-only | mandatory | A DisplayString Object that uniquely identifies an administered data module. |
| 1.3.6.1.4.1.6889.2.8.1.15.1.1.2 | Columng3datamodType | read-only | mandatory | A DisplayString Object containing the data module type. |
| 1.3.6.1.4.1.6889.2.8.1.15.1.1.3 | Columng3datamodName | read-only | mandatory | A DisplayString Object containing the name assigned to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16 | Nodeg3datamsta | |||
| 1.3.6.1.4.1.6889.2.8.1.16.1 | Tableg3datamstaTable | not-accessible | mandatory | A list of g3datamsta entries. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1 | Rowg3datamstaEntry | not-accessible | mandatory | A g3datamsta entry containing objects of the g3datamsta information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.1 | Columng3datamstaExtension | read-only | mandatory | A DisplayString Object that uniquely identifies an administered data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.2 | Columng3datamstaServiceState | read-only | mandatory | A DisplayString Object containing the service state of the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.3 | Columng3datamstaMaintBusy | read-only | mandatory | A DisplayString Object that indicates whether the data module has been busied for maintenance. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.4 | Columng3datamstaConnPort1 | read-only | mandatory | A DisplayString Object that contains the first port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.5 | Columng3datamstaConnPort2 | read-only | mandatory | A DisplayString Object that contains the second port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.6 | Columng3datamstaConnPort3 | read-only | mandatory | A DisplayString Object that contains the third port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.7 | Columng3datamstaConnPort4 | read-only | mandatory | A DisplayString Object that contains the fourth port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.8 | Columng3datamstaConnPort5 | read-only | mandatory | A DisplayString Object that contains the fifth port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.9 | Columng3datamstaConnPort6 | read-only | mandatory | A DisplayString Object that contains the sixth port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.10 | Columng3datamstaConnPort7 | read-only | mandatory | A DisplayString Object that contains the seventh port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.11 | Columng3datamstaConnPort8 | read-only | mandatory | A DisplayString Object that contains the eighth port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.12 | Columng3datamstaConnPort9 | read-only | mandatory | A DisplayString Object that contains the ninth port connected to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.16.1.1.13 | Columng3datamstaCFdestExt | read-only | mandatory | A DisplayString Object that contains the CF Destination Extension for the data module. |
| 1.3.6.1.4.1.6889.2.8.1.18 | Nodeg3timedate | |||
| 1.3.6.1.4.1.6889.2.8.1.18.1 | Scalarg3timedateDayOfMonth | read-write | mandatory | An INTEGER object containing the current system time Day of the Month (1-31). |
| 1.3.6.1.4.1.6889.2.8.1.18.2 | Scalarg3timedateMonth | read-write | mandatory | A DisplayString Object that contains the name of the Month ('January', 'February', 'March', 'April', 'May', 'June', 'July', 'August', 'September', 'October', '… |
| 1.3.6.1.4.1.6889.2.8.1.18.3 | Scalarg3timedateYear | read-write | mandatory | An INTEGER object containing the current system time Year (0000-9999). |
| 1.3.6.1.4.1.6889.2.8.1.18.4 | Scalarg3timedateDayOfWeek | read-write | mandatory | A DisplayString Object that contains the day of the week ('Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', or 'Sunday'). |
| 1.3.6.1.4.1.6889.2.8.1.18.5 | Scalarg3timedateHour | read-write | mandatory | An INTEGER object containing the current system time Hour (0-23). |
| 1.3.6.1.4.1.6889.2.8.1.18.6 | Scalarg3timedateMinute | read-write | mandatory | An INTEGER object containing the current system time Minute (0-59). |
| 1.3.6.1.4.1.6889.2.8.1.18.7 | Scalarg3timedateSecond | read-only | mandatory | An INTEGER object containing the current system time Second (0-59). |
| 1.3.6.1.4.1.6889.2.8.1.18.8 | Scalarg3timedateLastError1 | read-only | mandatory | A DisplayString Object that contains the last error message encountered when attempting to set the system date/time. |
| 1.3.6.1.4.1.6889.2.8.1.18.9 | Scalarg3timedateLastError2 | read-only | mandatory | See DESCRIPTION of g3timedateLastError1. |
| 1.3.6.1.4.1.6889.2.8.1.18.10 | Scalarg3timedateLastError3 | read-only | mandatory | See DESCRIPTION of g3timedateLastError1. |
| 1.3.6.1.4.1.6889.2.8.1.18.11 | Scalarg3timedateLastError4 | read-only | mandatory | See DESCRIPTION of g3timedateLastError1. |
| 1.3.6.1.4.1.6889.2.8.1.18.12 | Scalarg3timedateLastError5 | read-only | mandatory | See DESCRIPTION of g3timedateLastError1. |
| 1.3.6.1.4.1.6889.2.8.1.18.13 | Scalarg3timedateLastError6 | read-only | mandatory | See DESCRIPTION of g3timedateLastError1. |
| 1.3.6.1.4.1.6889.2.8.1.19 | Nodeg3busytrk | |||
| 1.3.6.1.4.1.6889.2.8.1.19.1 | Tableg3busytrkTable | not-accessible | mandatory | A list of g3busytrk entries. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1 | Rowg3busytrkEntry | not-accessible | mandatory | A g3busytrk entry containing objects of the g3busytrk information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.1 | Columng3busytrkAction | read-only | mandatory | A DisplayString Object that contains the last action performed on the trunk group and trunk member ('busyout' or 'release'). |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.2 | Columng3busytrkObject | read-only | mandatory | A DisplayString Object that contains the switch object 'trunk'. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.3 | Columng3busytrkGroup | read-only | mandatory | An INTEGER Object that uniquely identifies an administered trunk group on which a 'busyout' or 'release' operation was last performed. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.4 | Columng3busytrkMember | read-only | mandatory | An INTEGER Object that uniquely identifies an administered trunk member on which a 'busyout' or 'release' operation was last performed. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.5 | Columng3busytrkIndex | read-only | mandatory | An INTEGER Object that identifies an index number for the trunk group and member number record (currently always set to '1'). |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.6 | Columng3busytrkPort | read-only | mandatory | A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrie… |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.7 | Columng3busytrkMaintName | read-only | mandatory | A DisplayString Object containing the maintenance object name. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.8 | Columng3busytrkAltName | read-only | mandatory | A DisplayString Object containing the alternate name of the object. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.9 | Columng3busytrkResult | read-only | mandatory | A DisplayString Object containing the result of the last busyout/release operation. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.10 | Columng3busytrkErrorCode | read-only | mandatory | A DisplayString Object containing the error code associated with the result of the last busyout/release operation. |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.11 | Columng3busytrkLastError | read-only | mandatory | A DisplayString Object that contains the error message encountered on the last busyout/release operation. The string is blank if no command error was encounter… |
| 1.3.6.1.4.1.6889.2.8.1.19.1.1.12 | Columng3busytrkUDateStr | read-only | mandatory | A DisplayString Object that contains the UNIX time stamp when the result of the busyout/release operation was received. |
| 1.3.6.1.4.1.6889.2.8.1.20 | Nodeg3busybrd | |||
| 1.3.6.1.4.1.6889.2.8.1.20.1 | Tableg3busybrdTable | not-accessible | mandatory | A list of g3busybrd entries. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1 | Rowg3busybrdEntry | not-accessible | mandatory | A g3busybrd entry containing objects of the g3busybrd information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.1 | Columng3busybrdAction | read-only | mandatory | A DisplayString Object that contains the last action performed on the board or port on a board ('busyout' or 'release'). |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.2 | Columng3busybrdObject | read-only | mandatory | A DisplayString Object that contains the switch object 'board'. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.3 | Columng3busybrdBoardVal | read-only | mandatory | A DisplayString Object that uniquely identifies a board based on its location in the system which a 'busyout' or 'release' operation was last performed. The sy… |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.4 | Columng3busybrdPortVal | read-only | mandatory | An INTEGER Object that uniquely identifies an administered port location on which a 'busyout' or 'release' operation was last performed. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.5 | Columng3busybrdIndex | read-only | mandatory | An INTEGER Object that identifies an index number for the board /port number record (currently always set to '1'). |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.6 | Columng3busybrdPort | read-only | mandatory | A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrie… |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.7 | Columng3busybrdMaintName | read-only | mandatory | A DisplayString Object containing the maintenance object name. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.8 | Columng3busybrdAltName | read-only | mandatory | A DisplayString Object containing the alternate name of the object. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.9 | Columng3busybrdResult | read-only | mandatory | A DisplayString Object containing the result of the last busyout/release operation. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.10 | Columng3busybrdErrorCode | read-only | mandatory | A DisplayString Object containing the error code associated with the result of the last busyout/release operation. |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.11 | Columng3busybrdLastError | read-only | mandatory | A DisplayString Object that contains the error message encountered on the last busyout/release operation. The string is blank if no command error was encounter… |
| 1.3.6.1.4.1.6889.2.8.1.20.1.1.12 | Columng3busybrdUDateStr | read-only | mandatory | A DisplayString Object that contains the UNIX time stamp when the result of the busyout/release operation was received. |
| 1.3.6.1.4.1.6889.2.8.1.21 | Nodeg3servalm | |||
| 1.3.6.1.4.1.6889.2.8.1.21.1 | Tableg3servalmTable | not-accessible | mandatory | A list of g3servalm entries. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1 | Rowg3servalmEntry | not-accessible | mandatory | A g3servalm entry containing objects of the g3servalm information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1.1 | Columng3servalmID | read-only | mandatory | A DisplayString Object that uniquely identifies the server alarm. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1.2 | Columng3servalmSource | read-only | mandatory | A DisplayString Object containing the source of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1.3 | Columng3servalmEventID | read-only | mandatory | A DisplayString Object containing the event id of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1.4 | Columng3servalmLevel | read-only | mandatory | A DisplayString Object containing the level of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1.5 | Columng3servalmAck | read-only | mandatory | A DisplayString Object containing the alarm acknowledged flag. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1.6 | Columng3servalmDate | read-only | mandatory | A DisplayString Object containing the date the alarm was generated. |
| 1.3.6.1.4.1.6889.2.8.1.21.1.1.7 | Columng3servalmDescription | read-only | mandatory | A DisplayString Object containing a description of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.22 | Nodeg3msgalm | |||
| 1.3.6.1.4.1.6889.2.8.1.22.1 | Tableg3msgalmTable | not-accessible | mandatory | A list of g3msgalm entries. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1 | Rowg3msgalmEntry | not-accessible | mandatory | A g3msgalm entry containing objects of the g3msgalm information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.1 | Columng3msgalmID | read-only | mandatory | A DisplayString Object that uniquely identifies the messaging alarm. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.2 | Columng3msgalmAPP | read-only | mandatory | A DisplayString Object containing the alarm APP. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.3 | Columng3msgalmSource | read-only | mandatory | A DisplayString Object containing the source of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.4 | Columng3msgalmEventID | read-only | mandatory | A DisplayString Object containing the event id of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.5 | Columng3msgalmLevel | read-only | mandatory | A DisplayString Object containing the level of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.6 | Columng3msgalmAck | read-only | mandatory | A DisplayString Object containing the alarm acknowledged flag. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.7 | Columng3msgalmLocation | read-only | mandatory | A DisplayString Object containing the location of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.8 | Columng3msgalmDate | read-only | mandatory | A DisplayString Object containing the date the alarm was generated. |
| 1.3.6.1.4.1.6889.2.8.1.22.1.1.9 | Columng3msgalmDescription | read-only | mandatory | A DisplayString Object containing a description of the alarm. |
| 1.3.6.1.4.1.6889.2.8.1.23 | Nodeg3ipevt | |||
| 1.3.6.1.4.1.6889.2.8.1.23.1 | Tableg3ipevtTable | not-accessible | mandatory | A list of g3ipevt entries. |
| 1.3.6.1.4.1.6889.2.8.1.23.1.1 | Rowg3ipevtEntry | not-accessible | mandatory | A g3ipevt entry containing objects of the g3ipevt information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.23.1.1.1 | Columng3ipevtIndex | read-only | mandatory | An INTEGER object containing a unique index for each event in the IP event log for the current day. |
| 1.3.6.1.4.1.6889.2.8.1.23.1.1.2 | Columng3ipevtIPEvent | read-only | mandatory | A DisplayString Object that defines an event in the IP event log for the current day. |
| 1.3.6.1.4.1.6889.2.8.1.24 | Nodeg3platcmds | |||
| 1.3.6.1.4.1.6889.2.8.1.24.1 | Tableg3platcmdsTable | not-accessible | mandatory | A list of g3platcmds entries. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1 | Rowg3platcmdsEntry | not-accessible | mandatory | A g3platcmds entry containing objects of the g3platcmds information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1.1 | Columng3platcmdsDate | read-only | mandatory | An object containing the date the command was issued. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1.2 | Columng3platcmdsTime | read-only | mandatory | An object containing the time that the command was issued. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1.3 | Columng3platcmdsSeqNumber | read-only | mandatory | An object containing the system-generated sequence number. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1.4 | Columng3platcmdsPriority | read-only | mandatory | An object containing the session priority. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1.5 | Columng3platcmdsServerName | read-only | mandatory | An object containing the server name on which the command was issued. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1.6 | Columng3platcmdsLoginId | read-only | mandatory | An object containing the login id of the user issuing the command. |
| 1.3.6.1.4.1.6889.2.8.1.24.1.1.7 | Columng3platcmdsCommand | read-only | mandatory | An object containing the command issued by the user. |
| 1.3.6.1.4.1.6889.2.8.1.25 | Nodeg3version | |||
| 1.3.6.1.4.1.6889.2.8.1.25.1 | Scalarg3versionOperSystem | read-only | mandatory | An object containing the operating system running on the server. |
| 1.3.6.1.4.1.6889.2.8.1.25.2 | Scalarg3versionBuildDate | read-only | mandatory | An object containing operation system build date. |
| 1.3.6.1.4.1.6889.2.8.1.25.3 | Scalarg3versionLoadNumber | read-only | mandatory | An object containing the current CM load number running on the server (e.g. 01.0.628.5). |
| 1.3.6.1.4.1.6889.2.8.1.25.4 | Scalarg3versionRlsNumber | read-only | mandatory | An object containing the current CM release number (e.g. R013x.01.0.628.5). |
| 1.3.6.1.4.1.6889.2.8.1.25.5 | Scalarg3versionRlsString | read-only | mandatory | An object containing the CM release string (e.g. S8720-013-01.0.628.5). |
| 1.3.6.1.4.1.6889.2.8.1.25.6 | Scalarg3versionTransSaved | read-only | mandatory | An object containing the date and time that translation was last saved on the CM server. |
| 1.3.6.1.4.1.6889.2.8.1.25.7 | Scalarg3versionLicInstalled | read-only | mandatory | An object containing the date and time that the license was installed on the CM server. |
| 1.3.6.1.4.1.6889.2.8.1.26 | Nodeg3update | |||
| 1.3.6.1.4.1.6889.2.8.1.26.1 | Tableg3updateTable | not-accessible | mandatory | A list of g3update entries. |
| 1.3.6.1.4.1.6889.2.8.1.26.1.1 | Rowg3updateEntry | not-accessible | mandatory | A g3update entry containing objects of the g3update information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.26.1.1.1 | Columng3updateID | read-only | mandatory | An object containing the identifier for the installed update (e.g. 01.0.628.5-7777). |
| 1.3.6.1.4.1.6889.2.8.1.26.1.1.2 | Columng3updateStatus | read-only | mandatory | An object containing current status of the update (e.g. unpacked). |
| 1.3.6.1.4.1.6889.2.8.1.26.1.1.3 | Columng3updateType | read-only | mandatory | An object containing the update type (e.g. cold). |
| 1.3.6.1.4.1.6889.2.8.1.26.1.1.4 | Columng3updateDescription | read-only | mandatory | An object containing a description about the update. |
| 1.3.6.1.4.1.6889.2.8.1.27 | Nodeg3partition | |||
| 1.3.6.1.4.1.6889.2.8.1.27.1 | Tableg3partitionTable | not-accessible | mandatory | A list of g3partition entries. |
| 1.3.6.1.4.1.6889.2.8.1.27.1.1 | Rowg3partitionEntry | not-accessible | mandatory | A g3partition entry containing objects of the g3partition information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.27.1.1.1 | Columng3partitionPhysPartition | read-only | mandatory | An object containing the physical partition name (e.g. hda1). |
| 1.3.6.1.4.1.6889.2.8.1.27.1.1.2 | Columng3partitionSoftwareRls | read-only | mandatory | An object containing CM software release on the partition (e.g. 01.2.632.1). |
| 1.3.6.1.4.1.6889.2.8.1.27.1.1.3 | Columng3partitionBootPartition | read-only | mandatory | An object indicating whether the partition is the boot partition or not (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.27.1.1.4 | Columng3partitionActivePartition | read-only | mandatory | An object indicating whether the partition is the active partition or not (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.30 | Nodeg3ds1cfg | |||
| 1.3.6.1.4.1.6889.2.8.1.30.1 | Scalarg3ds1cfgTage | read-only | mandatory | The number of timeticks since the ds1 configuration data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ds1cfgTintvl ob… |
| 1.3.6.1.4.1.6889.2.8.1.30.2 | Scalarg3ds1cfgTintvl | read-write | mandatory | An object containing the interval for which the ds1 configuration data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT… |
| 1.3.6.1.4.1.6889.2.8.1.30.3 | Scalarg3ds1cfgTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.30.4 | Scalarg3ds1cfgTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.30.5 | Scalarg3ds1cfgTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.30.6 | Tableg3ds1cfgTable | not-accessible | mandatory | A list of g3ds1cfg entries. |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1 | Rowg3ds1cfgEntry | not-accessible | mandatory | A g3ds1cfg entry containing objects of the g3ds1cfg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1.1 | Columng3ds1cfgBoardNum | read-only | mandatory | A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carr… |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1.2 | Columng3ds1cfgCode | read-only | mandatory | A DisplayString Object that contains the code that defines the type of board. |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1.3 | Columng3ds1cfgSuffix | read-only | mandatory | A DisplayString Object that contains the suffix to the code |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1.4 | Columng3ds1cfgVintage | read-only | mandatory | A DisplayString Object that contains the vintage of the board. (object ds1cfgCode) that defines the type of board. |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1.5 | Columng3ds1cfgSignaling | read-only | mandatory | A DisplayString Object that contains the signaling of the board. |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1.6 | Columng3ds1cfgName | read-only | mandatory | A DisplayString Object that contains the name of the board. |
| 1.3.6.1.4.1.6889.2.8.1.30.6.1.7 | Columng3ds1cfgCsuMod | read-only | mandatory | A DisplayString Object that contains the type of CSU Mod. |
| 1.3.6.1.4.1.6889.2.8.1.31 | Nodeg3extdev | |||
| 1.3.6.1.4.1.6889.2.8.1.31.1 | Scalarg3extdevTage | read-only | mandatory | The number of timeticks since the external device data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3extdevintvl objec… |
| 1.3.6.1.4.1.6889.2.8.1.31.2 | Scalarg3extdevTintvl | read-write | mandatory | An object containing the interval for which the external device data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.31.3 | Scalarg3extdevTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.31.4 | Scalarg3extdevTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.31.5 | Scalarg3extdevTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.31.6 | Tableg3extdevTable | not-accessible | mandatory | A list of g3extdev entries. |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1 | Rowg3extdevEntry | not-accessible | mandatory | A g3extdev entry containing objects of the g3extdev information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1.1 | Columng3extdevPort | read-only | mandatory | A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrie… |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1.2 | Columng3extdevType | read-only | mandatory | A DisplayString Object that defines the type of the device. |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1.3 | Columng3extdevAltName | read-only | mandatory | A DisplayString Object that contains the alternate name for the device. |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1.4 | Columng3extdevDescription | read-only | mandatory | A DisplayString Object that describes the external device. |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1.5 | Columng3extdevID | read-only | mandatory | A DisplayString Object that contains the product identifier of the external device. |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1.6 | Columng3extdevBuilding | read-only | mandatory | A DisplayString Object that contains the building location of the external device. |
| 1.3.6.1.4.1.6889.2.8.1.31.6.1.7 | Columng3extdevAddress | read-only | mandatory | A DisplayString Object that contains the address of the external device. |
| 1.3.6.1.4.1.6889.2.8.1.32 | Nodeg3trunkgrp | |||
| 1.3.6.1.4.1.6889.2.8.1.32.1 | Scalarg3trunkgrpTage | read-only | mandatory | The number of timeticks since the trunk group data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3trunkgrpintvl object … |
| 1.3.6.1.4.1.6889.2.8.1.32.2 | Scalarg3trunkgrpTintvl | read-write | mandatory | An object containing the interval for which the trunk group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT reque… |
| 1.3.6.1.4.1.6889.2.8.1.32.3 | Scalarg3trunkgrpTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.32.4 | Scalarg3trunkgrpTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.32.5 | Scalarg3trunkgrpTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.32.6 | Tableg3trunkgrpTable | not-accessible | mandatory | A list of g3trunkgrp entries. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1 | Rowg3trunkgrpEntry | not-accessible | mandatory | A g3trunkgrp entry containing objects of the g3trunkgrp information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.1 | Columng3trunkgrpNumber | read-only | mandatory | An INTEGER Object that uniquely identifies an administered trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.2 | Columng3trunkgrpType | read-only | mandatory | A DisplayString Object containing the trunk group type. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.3 | Columng3trunkgrpName | read-only | mandatory | A DisplayString Object containing the name assigned to the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.4 | Columng3trunkgrpDirection | read-only | mandatory | A DisplayString Object containing the trunk group direction. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.5 | Columng3trunkgrpServiceType | read-only | mandatory | A DisplayString Object containing the trunk group service type. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.6 | Columng3trunkgrpCommType | read-only | mandatory | A DisplayString Object containing the trunk group communications type. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.7 | Columng3trunkgrpTrunkType | read-only | mandatory | A DisplayString Object containing the trunk group trunk type. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.8 | Columng3trunkgrpSize | read-only | mandatory | An INTEGER Object containing the number of trunk group members. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.9 | Columng3trunkgrpUsageAlloc | read-only | mandatory | A DisplayString Object containing a y/n flag for usage allocation. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.10 | Columng3trunkgrpTAC | read-only | mandatory | An object containing the Access Code for the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.11 | Columng3trunkgrpWideSupport | read-only | mandatory | A DisplayString Object containing a wideband support flag. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.12 | Columng3trunkgrpDCSFlag | read-only | mandatory | A DisplayString Object containing the flag that shows whether the trunk is used for DCS (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.13 | Columng3trunkgrpPbxID | read-only | mandatory | An INTEGER Object containing the identifier of the PBX. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.14 | Columng3trunkgrpDCSSigType | read-only | mandatory | A DisplayString Object containing the DCS signaling type. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.15 | Columng3trunkgrpSigType | read-only | mandatory | A DisplayString Object containing the trunk signaling type. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.16 | Columng3trunkgrpACAFlag | read-only | mandatory | A DisplayString Object containing the flag that shows whether the trunk is used for ACA (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.17 | Columng3trunkgrpLongHold | read-only | mandatory | An INTEGER Object containing the long holding time in hours. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.18 | Columng3trunkgrpShortHold | read-only | mandatory | An INTEGER Object containing the short holding time in seconds. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.19 | Columng3trunkgrpShortThreshold | read-only | mandatory | An INTEGER Object containing the short hold time threshold. |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.20 | Columng3trunkgrpQsigValueAdd | read-only | mandatory | A DisplayString Object containing a flag that indicates whether or not QSIG Value-Added is in use (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.32.6.1.21 | Columng3trunkgrpSuppServProt | read-only | mandatory | A DisplayString Object specifying which supplementary server protocol is being used (can have a value of a-g). |
| 1.3.6.1.4.1.6889.2.8.1.33 | Nodeg3bulletin | |||
| 1.3.6.1.4.1.6889.2.8.1.33.1 | Scalarg3bulletinTage | read-only | mandatory | The number of timeticks since the bulletin board data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3bulletinintvl obje… |
| 1.3.6.1.4.1.6889.2.8.1.33.2 | Scalarg3bulletinTintvl | read-write | mandatory | An object containing the interval for which the bulletin board data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT re… |
| 1.3.6.1.4.1.6889.2.8.1.33.3 | Scalarg3bulletinTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.33.4 | Scalarg3bulletinTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.33.5 | Scalarg3bulletinMessage1 | read-only | mandatory | A DisplayString Object containing a bulletin board message. A message posted to the bulletin board can consist of one or more Message fields entered by the use… |
| 1.3.6.1.4.1.6889.2.8.1.33.6 | Scalarg3bulletinMessage2 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.7 | Scalarg3bulletinMessage3 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.8 | Scalarg3bulletinMessage4 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.9 | Scalarg3bulletinMessage5 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.10 | Scalarg3bulletinMessage6 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.11 | Scalarg3bulletinMessage7 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.12 | Scalarg3bulletinMessage8 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.13 | Scalarg3bulletinMessage9 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.14 | Scalarg3bulletinMessage10 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.15 | Scalarg3bulletinMessage11 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.16 | Scalarg3bulletinMessage12 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.17 | Scalarg3bulletinMessage13 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.18 | Scalarg3bulletinMessage14 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.19 | Scalarg3bulletinMessage15 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.20 | Scalarg3bulletinMessage16 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.21 | Scalarg3bulletinMessage17 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.22 | Scalarg3bulletinMessage18 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.23 | Scalarg3bulletinMessage19 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.24 | Scalarg3bulletinMessage20 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.25 | Scalarg3bulletinMessage21 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.26 | Scalarg3bulletinMessage22 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.27 | Scalarg3bulletinMessage23 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.28 | Scalarg3bulletinMessage24 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.29 | Scalarg3bulletinMessage25 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.30 | Scalarg3bulletinMessage26 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.31 | Scalarg3bulletinMessage27 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.32 | Scalarg3bulletinMessage28 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.33 | Scalarg3bulletinMessage29 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.34 | Scalarg3bulletinMessage30 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.35 | Scalarg3bulletinMessage31 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.36 | Scalarg3bulletinMessage32 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.37 | Scalarg3bulletinMessage33 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.38 | Scalarg3bulletinMessage34 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.39 | Scalarg3bulletinMessage35 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.40 | Scalarg3bulletinMessage36 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.41 | Scalarg3bulletinMessage37 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.42 | Scalarg3bulletinMessage38 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.43 | Scalarg3bulletinMessage39 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.44 | Scalarg3bulletinMessage40 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.45 | Scalarg3bulletinMessage41 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.46 | Scalarg3bulletinMessage42 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.47 | Scalarg3bulletinMessage43 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.48 | Scalarg3bulletinMessage44 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.49 | Scalarg3bulletinMessage45 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.50 | Scalarg3bulletinMessage46 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.51 | Scalarg3bulletinMessage47 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.52 | Scalarg3bulletinMessage48 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.53 | Scalarg3bulletinMessage49 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.54 | Scalarg3bulletinMessage50 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.55 | Scalarg3bulletinMessage51 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.56 | Scalarg3bulletinMessage52 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.57 | Scalarg3bulletinMessage53 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.58 | Scalarg3bulletinMessage54 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.59 | Scalarg3bulletinMessage55 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.60 | Scalarg3bulletinMessage56 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.61 | Scalarg3bulletinMessage57 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.62 | Scalarg3bulletinMessage58 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.63 | Scalarg3bulletinMessage59 | read-only | mandatory | See DESCRIPTION of g3bulletinMessage1. |
| 1.3.6.1.4.1.6889.2.8.1.33.64 | Scalarg3bulletinDate1 | read-only | mandatory | A DisplayString Object containing a bulletin board Date. Each Date field is associated with a Message field. If the associated Message field is not blank, the … |
| 1.3.6.1.4.1.6889.2.8.1.33.65 | Scalarg3bulletinDate2 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.66 | Scalarg3bulletinDate3 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.67 | Scalarg3bulletinDate4 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.68 | Scalarg3bulletinDate5 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.69 | Scalarg3bulletinDate6 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.70 | Scalarg3bulletinDate7 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.71 | Scalarg3bulletinDate8 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.72 | Scalarg3bulletinDate9 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.73 | Scalarg3bulletinDate10 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.74 | Scalarg3bulletinDate11 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.75 | Scalarg3bulletinDate12 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.76 | Scalarg3bulletinDate13 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.77 | Scalarg3bulletinDate14 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.78 | Scalarg3bulletinDate15 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.79 | Scalarg3bulletinDate16 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.80 | Scalarg3bulletinDate17 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.81 | Scalarg3bulletinDate18 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.82 | Scalarg3bulletinDate19 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.83 | Scalarg3bulletinDate20 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.84 | Scalarg3bulletinDate21 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.85 | Scalarg3bulletinDate22 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.86 | Scalarg3bulletinDate23 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.87 | Scalarg3bulletinDate24 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.88 | Scalarg3bulletinDate25 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.89 | Scalarg3bulletinDate26 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.90 | Scalarg3bulletinDate27 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.91 | Scalarg3bulletinDate28 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.92 | Scalarg3bulletinDate29 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.93 | Scalarg3bulletinDate30 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.94 | Scalarg3bulletinDate31 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.95 | Scalarg3bulletinDate32 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.96 | Scalarg3bulletinDate33 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.97 | Scalarg3bulletinDate34 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.98 | Scalarg3bulletinDate35 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.99 | Scalarg3bulletinDate36 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.100 | Scalarg3bulletinDate37 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.101 | Scalarg3bulletinDate38 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.102 | Scalarg3bulletinDate39 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.103 | Scalarg3bulletinDate40 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.104 | Scalarg3bulletinDate41 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.105 | Scalarg3bulletinDate42 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.106 | Scalarg3bulletinDate43 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.107 | Scalarg3bulletinDate44 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.108 | Scalarg3bulletinDate45 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.109 | Scalarg3bulletinDate46 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.110 | Scalarg3bulletinDate47 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.111 | Scalarg3bulletinDate48 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.112 | Scalarg3bulletinDate49 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.113 | Scalarg3bulletinDate50 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.114 | Scalarg3bulletinDate51 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.115 | Scalarg3bulletinDate52 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.116 | Scalarg3bulletinDate53 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.117 | Scalarg3bulletinDate54 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.118 | Scalarg3bulletinDate55 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.119 | Scalarg3bulletinDate56 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.120 | Scalarg3bulletinDate57 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.121 | Scalarg3bulletinDate58 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.33.122 | Scalarg3bulletinDate59 | read-only | mandatory | See DESCRIPTION of g3bulletinDate1. |
| 1.3.6.1.4.1.6889.2.8.1.34 | Nodeg3ds1 | |||
| 1.3.6.1.4.1.6889.2.8.1.34.1 | Scalarg3ds1Tage | read-only | mandatory | The number of timeticks since the ds1 data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ds1intvl object allows the Ne… |
| 1.3.6.1.4.1.6889.2.8.1.34.2 | Scalarg3ds1Tintvl | read-write | mandatory | An object containing the interval for which the ds1 data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for d… |
| 1.3.6.1.4.1.6889.2.8.1.34.3 | Scalarg3ds1Tdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.34.4 | Scalarg3ds1Tretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.34.5 | Scalarg3ds1Tcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.34.6 | Tableg3ds1Table | not-accessible | mandatory | A list of g3ds1 entries. |
| 1.3.6.1.4.1.6889.2.8.1.34.6.1 | Rowg3ds1Entry | not-accessible | mandatory | A g3ds1 entry containing objects of the g3ds1 information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.34.6.1.1 | Columng3ds1Location | read-only | mandatory | A DisplayString Object that uniquely identifies a DS1 port board based on its location in the system. The syntax for the Port Location is as follows: cabinet(0… |
| 1.3.6.1.4.1.6889.2.8.1.34.6.1.2 | Columng3ds1BitRate | read-only | mandatory | A DisplayString Object containing the Bit Rate for the DS1 board. |
| 1.3.6.1.4.1.6889.2.8.1.34.6.1.3 | Columng3ds1Signaling | read-only | mandatory | A DisplayString Object that contains the signaling of the board |
| 1.3.6.1.4.1.6889.2.8.1.34.6.1.4 | Columng3ds1Name | read-only | mandatory | A DisplayString Object that contains the name of the board |
| 1.3.6.1.4.1.6889.2.8.1.35 | Nodeg3atmpnc | |||
| 1.3.6.1.4.1.6889.2.8.1.35.1 | Scalarg3atmpncTage | read-only | mandatory | The number of timeticks since the ATM PNC data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3atmpncintvl object allows… |
| 1.3.6.1.4.1.6889.2.8.1.35.2 | Scalarg3atmpncTintvl | read-write | mandatory | An object containing the interval for which the ATM PNC group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.35.3 | Scalarg3atmpncTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.35.4 | Scalarg3atmpncTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.35.5 | Scalarg3atmpncTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.35.6 | Tableg3atmpncTable | not-accessible | mandatory | A list of g3atmpnc entries. |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1 | Rowg3atmpncEntry | not-accessible | mandatory | A g3atmpnc entry containing objects of the g3atmpnc information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.1 | Columng3atmpncconnection | read-only | mandatory | An INTEGER Object that uniquely identifies an administered ATM PNC connection. |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.2 | Columng3atmpncPncLocA | read-only | mandatory | An DisplayString Object that contains the ATM PNC location A port network location (exp 02A24). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.3 | Columng3atmpncPncNameA | read-only | mandatory | An DisplayString Object that contains the name of the ATM PNC location A name (15 alphanumeric characters). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.4 | Columng3atmpncPncAddFmtA | read-only | mandatory | An DisplayString Object that contains the address format of the ATM PNC location A (DCC ATM, E.164 ATM Private, or ICD ATM). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.5 | Columng3atmpncPncAFIA | read-only | mandatory | An DisplayString Object that contains the AFI value of the ATM PNC location A AFI field (39 for DCC, 45 for E.164 ATM Private, or 47 for ICD ATM). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.6 | Columng3atmpncPncE164A | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location A E.164 field (16 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.7 | Columng3atmpncPncDCIA | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location A DCC/ICD field (4 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.8 | Columng3atmpncPncHoDsp1A | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location A HO-DSP1 field (8 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.9 | Columng3atmpncPncHoDsp2A | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location A HO-DSP2 field (20 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.10 | Columng3atmpncPncESIA | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location A ESI field (12 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.11 | Columng3atmpncPncSELA | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location A SEL field (2 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.12 | Columng3atmpncPncLocB | read-only | mandatory | An DisplayString Object that contains the ATM PNC location B port network location (exp 03A24). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.13 | Columng3atmpncPncNameB | read-only | mandatory | An DisplayString Object that contains the name of the ATM PNC location B name (15 alphanumeric characters). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.14 | Columng3atmpncPncAddFmtB | read-only | mandatory | An DisplayString Object that contains the address format of the ATM PNC location B (DCC ATM, E.164 ATM Private, or ICD ATM). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.15 | Columng3atmpncPncAFIB | read-only | mandatory | An DisplayString Object that contains the AFI value of the ATM PNC location B AFI field (39 for DCC, 45 for E.164 ATM Private, or 47 for ICD ATM). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.16 | Columng3atmpncPncE164B | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location B E.164 field (16 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.17 | Columng3atmpncPncDCIB | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location B DCC/ICD field (4 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.18 | Columng3atmpncPncHoDsp1B | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location B HO-DSP1 field (8 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.19 | Columng3atmpncPncHoDsp2B | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location B HO-DSP2 field (20 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.20 | Columng3atmpncPncESIB | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location B ESI field (12 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.35.6.1.21 | Columng3atmpncPncSELB | read-only | mandatory | An DisplayString Object that contains the hexidecimal value of the ATM PNC location B SEL field (2 hexidecimal digits). |
| 1.3.6.1.4.1.6889.2.8.1.36 | Nodeg3pnchealth | |||
| 1.3.6.1.4.1.6889.2.8.1.36.1 | Scalarg3pnchealthTage | read-only | mandatory | The number of timeticks since the pnc health data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3pnchealthTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.36.2 | Scalarg3pnchealthTintvl | read-write | mandatory | An object containing the interval for which the pnc health data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT reques… |
| 1.3.6.1.4.1.6889.2.8.1.36.3 | Scalarg3pnchealthTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.36.4 | Scalarg3pnchealthTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.36.5 | Scalarg3pnchealthSoftwreLck | read-only | mandatory | A DisplayString Object containing the Software Locked status (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.36.6 | Scalarg3pnchealthStandbyBusd | read-only | mandatory | A DisplayString Object containing the Standby Busied status (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.36.7 | Scalarg3pnchealthStndbyRfsh | read-only | mandatory | A DisplayString Object containing the Standby Refresh status (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.36.8 | Scalarg3pnchealthIntchDisble | read-only | mandatory | A DisplayString Object containing the Interchange Disable status (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.36.9 | Scalarg3pnchealthPncAMode | read-only | mandatory | A DisplayString Object containing the current mode of PNC A. |
| 1.3.6.1.4.1.6889.2.8.1.36.10 | Scalarg3pnchealthPncBMode | read-only | mandatory | A DisplayString Object containing the current mode of PNC B. |
| 1.3.6.1.4.1.6889.2.8.1.36.11 | Scalarg3pnchealthPncAHealth | read-only | mandatory | A DisplayString Object containing the current state of health of PNC A. |
| 1.3.6.1.4.1.6889.2.8.1.36.12 | Scalarg3pnchealthPncBHealth | read-only | mandatory | A DisplayString Object containing the current state of health of PNC B. |
| 1.3.6.1.4.1.6889.2.8.1.36.13 | Scalarg3pnchealthPncAIntrIdx | read-only | mandatory | A DisplayString Object containing the current PN Interchange Index for PNC A. |
| 1.3.6.1.4.1.6889.2.8.1.36.14 | Scalarg3pnchealthPncBIntrIdx | read-only | mandatory | A DisplayString Object containing the current PN Interchange Index for PNC B. |
| 1.3.6.1.4.1.6889.2.8.1.36.15 | Scalarg3pnchealthPncAMajor | read-only | mandatory | A Gauge object containing the number of logged major alarms for PNC A. |
| 1.3.6.1.4.1.6889.2.8.1.36.16 | Scalarg3pnchealthPncBMajor | read-only | mandatory | A Gauge object containing the number of logged major alarms for PNC B. |
| 1.3.6.1.4.1.6889.2.8.1.36.17 | Scalarg3pnchealthPncAMinor | read-only | mandatory | A Gauge object containing the number of logged minor alarms for PNC A. |
| 1.3.6.1.4.1.6889.2.8.1.36.18 | Scalarg3pnchealthPncBMinor | read-only | mandatory | A Gauge object containing the number of logged minor alarms for PNC B. |
| 1.3.6.1.4.1.6889.2.8.1.36.19 | Scalarg3pnchealthPncAWarning | read-only | mandatory | A Gauge object containing the number of logged warning alarms for PNC A. |
| 1.3.6.1.4.1.6889.2.8.1.36.20 | Scalarg3pnchealthPncBWarning | read-only | mandatory | A Gauge object containing the number of logged warning alarms for PNC B. |
| 1.3.6.1.4.1.6889.2.8.1.36.21 | Scalarg3pnchealthPncASNIntrIdx | read-only | mandatory | A DisplayString Object containing the current SN Interchange Index for PNC A. |
| 1.3.6.1.4.1.6889.2.8.1.36.22 | Scalarg3pnchealthPncBSNIntrIdx | read-only | mandatory | A DisplayString Object containing the current SN Interchange Index for PNC B. |
| 1.3.6.1.4.1.6889.2.8.1.37 | Nodeg3siggroup | |||
| 1.3.6.1.4.1.6889.2.8.1.37.1 | Scalarg3siggroupTage | read-only | mandatory | The number of timeticks since the signaling group data was extracted from the switch by the G3 Proxy Agent. This object along with the g3siggroupTintvl object … |
| 1.3.6.1.4.1.6889.2.8.1.37.2 | Scalarg3siggroupTintvl | read-write | mandatory | An object containing the interval for which the signaling group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.37.3 | Scalarg3siggroupTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.37.4 | Scalarg3siggroupTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.37.5 | Scalarg3siggroupTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.37.6 | Tableg3siggroupTable | not-accessible | mandatory | A list of g3siggroup entries. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1 | Rowg3siggroupEntry | not-accessible | mandatory | A g3siggroup entry containing objects of the g3siggroup information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.1 | Columng3siggroupGrpNbr | read-only | mandatory | An INTEGER Object that uniquely identifies an administered Signaling Group. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.2 | Columng3siggroupPriDChannel | read-only | mandatory | A DisplayString Object that uniquely identifies the Primary D channel adminstered for this Signaling Group. The syntax for the Primary D Channel is as follows:… |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.3 | Columng3siggroupSecDChannel | read-only | mandatory | A DisplayString Object that uniquely identifies the Secondary D channel adminstered for this Signaling Group. The syntax for the Secondary D Channel is as foll… |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.4 | Columng3siggroupBoard1 | read-only | mandatory | A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):ca… |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.5 | Columng3siggroupBoard2 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.6 | Columng3siggroupBoard3 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.7 | Columng3siggroupBoard4 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.8 | Columng3siggroupBoard5 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.9 | Columng3siggroupBoard6 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.10 | Columng3siggroupBoard7 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.11 | Columng3siggroupBoard8 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.12 | Columng3siggroupBoard9 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.13 | Columng3siggroupBoard10 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.14 | Columng3siggroupBoard11 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.15 | Columng3siggroupBoard12 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.16 | Columng3siggroupBoard13 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.17 | Columng3siggroupBoard14 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.18 | Columng3siggroupBoard15 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.19 | Columng3siggroupBoard16 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.20 | Columng3siggroupBoard17 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.21 | Columng3siggroupBoard18 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.22 | Columng3siggroupBoard19 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.23 | Columng3siggroupBoard20 | read-only | mandatory | See DESCRIPTION of g3siggroupBoard1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.24 | Columng3siggroupIntfNum1 | read-only | mandatory | An INTEGER object containing the Signaling Group Interface Number using this board. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.25 | Columng3siggroupIntfNum2 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.26 | Columng3siggroupIntfNum3 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.27 | Columng3siggroupIntfNum4 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.28 | Columng3siggroupIntfNum5 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.29 | Columng3siggroupIntfNum6 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.30 | Columng3siggroupIntfNum7 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.31 | Columng3siggroupIntfNum8 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.32 | Columng3siggroupIntfNum9 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.33 | Columng3siggroupIntfNum10 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.34 | Columng3siggroupIntfNum11 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.35 | Columng3siggroupIntfNum12 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.36 | Columng3siggroupIntfNum13 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.37 | Columng3siggroupIntfNum14 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.38 | Columng3siggroupIntfNum15 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.39 | Columng3siggroupIntfNum16 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.40 | Columng3siggroupIntfNum17 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.41 | Columng3siggroupIntfNum18 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.42 | Columng3siggroupIntfNum19 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.43 | Columng3siggroupIntfNum20 | read-only | mandatory | See DESCRIPTION of g3siggroupIntfNum1. |
| 1.3.6.1.4.1.6889.2.8.1.37.6.1.44 | Columng3siggroupAsocSignal | read-only | mandatory | A DisplayString Object containing the Associated Signaling status (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.38 | Nodeg3restart | |||
| 1.3.6.1.4.1.6889.2.8.1.38.1 | Scalarg3restartTage | read-only | mandatory | The number of timeticks since the system restart data was extracted from the switch by the G3 Proxy Agent. This object along with the g3restartTintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.38.2 | Scalarg3restartTintvl | read-write | mandatory | An object containing the interval for which the system restart data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT re… |
| 1.3.6.1.4.1.6889.2.8.1.38.3 | Scalarg3restartTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.38.4 | Scalarg3restartTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.38.5 | Scalarg3restartTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.38.6 | Tableg3restartTable | not-accessible | mandatory | A list of g3restart entries. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1 | Rowg3restartEntry | not-accessible | mandatory | A g3restart entry containing objects of the g3restart information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.1 | Columng3restartMonth | read-only | mandatory | An INTEGER Object that uniquely identifies the Month (01-12) in which a system restart occurred. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.2 | Columng3restartDay | read-only | mandatory | An INTEGER Object that uniquely identifies the Day (01-31) in which a system restart occurred. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.3 | Columng3restartHour | read-only | mandatory | An INTEGER Object that uniquely identifies the Hour (00-23) in which a system restart occurred. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.4 | Columng3restartMinute | read-only | mandatory | An INTEGER Object that uniquely identifies the Minute (00-59) in which a system restart occurred. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.5 | Columng3restartDateTime | read-only | mandatory | A DisplayString object containing the date and time (of the form MM/DD HH:MM) in which a system restart occurred. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.6 | Columng3restartLevel | read-only | mandatory | A DisplayString object containing the level of the restart (WARM, COLD1, COLD2, REBOOT, or XREBOOT). |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.7 | Columng3restartCarrier | read-only | mandatory | A DisplayString object containing the carrier (A or B) on which the restart occurred. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.8 | Columng3restartCraftDemand | read-only | mandatory | A DisplayString object containing a flag (Y or N) indicating whether or not the restart was craft demanded. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.9 | Columng3restartEscalated | read-only | mandatory | A DisplayString object containing a flag (Y or N) indicating whether or not the restart was escalated. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.10 | Columng3restartInterchange | read-only | mandatory | A DisplayString object containing a flag (Y or N) indicating whether or not an interchange took place. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.11 | Columng3restartUnavailable | read-only | mandatory | A DisplayString object containing the amount of time (of the form HH:MM:SS) the system was unavailable due to the restart. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.12 | Columng3restartCause | read-only | mandatory | A DisplayString object containing the cause of the system restart. |
| 1.3.6.1.4.1.6889.2.8.1.38.6.1.13 | Columng3restartIndex | read-only | mandatory | An INTEGER Object that provides a secondary key for multiple restarts occurring in the same minute. |
| 1.3.6.1.4.1.6889.2.8.1.39 | Nodeg3fiberlink | |||
| 1.3.6.1.4.1.6889.2.8.1.39.1 | Scalarg3fiberlinkTage | read-only | mandatory | The number of timeticks since the fiberlink data was extracted from the switch by the G3 Proxy Agent. This object along with the g3fiberlinkTintvl object allow… |
| 1.3.6.1.4.1.6889.2.8.1.39.2 | Scalarg3fiberlinkTintvl | read-write | mandatory | An object containing the interval for which the fiberlink data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request… |
| 1.3.6.1.4.1.6889.2.8.1.39.3 | Scalarg3fiberlinkTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.39.4 | Scalarg3fiberlinkTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.39.5 | Scalarg3fiberlinkTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.39.6 | Tableg3fiberlinkTable | not-accessible | mandatory | A list of g3fiberlink entries. |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1 | Rowg3fiberlinkEntry | not-accessible | mandatory | A g3fiberlink entry containing objects of the g3fiberlink information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.1 | Columng3fiberlinkFLNumber | read-only | mandatory | An INTEGER Object that uniquely identifies an administered Fiber Link. |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.2 | Columng3fiberlinkDS1Type | read-only | mandatory | A DisplayString Object that identifies the type of DS1 Converter board used if a DS1 converter is used (TNXXXX). |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.3 | Columng3fiberlinkE1Type | read-only | mandatory | A DisplayString Object that identifies the type of the Endpoint for Endpoint 1 (sni or ei). |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.4 | Columng3fiberlinkE2Type | read-only | mandatory | A DisplayString Object that identifies the type of the Endpoint for Endpoint 1 (sni or ei). |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.5 | Columng3fiberlinkE1ABoard | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 1 A-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is … |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.6 | Columng3fiberlinkE2ABoard | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 2 A-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is … |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.7 | Columng3fiberlinkE1BBoard | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 1 B-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is … |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.8 | Columng3fiberlinkE2BBoard | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 2 B-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is … |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.9 | Columng3fiberlinkE1ADs1Board | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 1 A-PNC DS1 board based on its location in the system. The syntax for the Board Location is as fol… |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.10 | Columng3fiberlinkE2ADs1Board | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 2 A-PNC DS1 board based on its location in the system. The syntax for the Board Location is as fol… |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.11 | Columng3fiberlinkE1BDs1Board | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 1 B-PNC DS1 board based on its location in the system. The syntax for the Board Location is as fol… |
| 1.3.6.1.4.1.6889.2.8.1.39.6.1.12 | Columng3fiberlinkE2BDs1Board | read-only | mandatory | A DisplayString Object that uniquely identifies the Endpoint 2 B-PNC DS1 board based on its location in the system. The syntax for the Board Location is as fol… |
| 1.3.6.1.4.1.6889.2.8.1.40 | Nodeg3routepattern | |||
| 1.3.6.1.4.1.6889.2.8.1.40.1 | Scalarg3routepatternTage | read-only | mandatory | The number of timeticks since the routepattern data was extracted from the switch by the G3 Proxy Agent. This object along with the g3routepatternTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.40.2 | Scalarg3routepatternTintvl | read-write | mandatory | An object containing the interval for which the routepattern data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.40.3 | Scalarg3routepatternTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.40.4 | Scalarg3routepatternTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.40.5 | Scalarg3routepatternTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.40.6 | Tableg3routepatternTable | not-accessible | mandatory | A list of g3routepattern entries. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1 | Rowg3routepatternEntry | not-accessible | mandatory | A g3routepattern entry containing objects of the g3routepattern information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.1 | Columng3routepatternRPNumber | read-only | mandatory | An INTEGER Object that uniquely identifies an administered Route Pattern. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.2 | Columng3routepatternTGNumber1 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 1. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.3 | Columng3routepatternTGNumber2 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 2. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.4 | Columng3routepatternTGNumber3 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 3. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.5 | Columng3routepatternTGNumber4 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 4. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.6 | Columng3routepatternTGNumber5 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 5. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.7 | Columng3routepatternTGNumber6 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 6. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.8 | Columng3routepatternTGNumber7 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 7. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.9 | Columng3routepatternTGNumber8 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 8. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.10 | Columng3routepatternTGNumber9 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 9. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.11 | Columng3routepatternTGNumber10 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 10. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.12 | Columng3routepatternTGNumber11 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 11. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.13 | Columng3routepatternTGNumber12 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 12. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.14 | Columng3routepatternTGNumber13 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 13. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.15 | Columng3routepatternTGNumber14 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 14. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.16 | Columng3routepatternTGNumber15 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 15. |
| 1.3.6.1.4.1.6889.2.8.1.40.6.1.17 | Columng3routepatternTGNumber16 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with group number 16. |
| 1.3.6.1.4.1.6889.2.8.1.41 | Nodeg3trunkcfg | |||
| 1.3.6.1.4.1.6889.2.8.1.41.1 | Scalarg3trunkcfgTage | read-only | mandatory | The number of timeticks since the trunk config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3trunkcfgTintvl object all… |
| 1.3.6.1.4.1.6889.2.8.1.41.2 | Scalarg3trunkcfgTintvl | read-write | mandatory | An object containing the interval for which the trunk config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.41.3 | Scalarg3trunkcfgTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.41.4 | Scalarg3trunkcfgTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.41.5 | Scalarg3trunkcfgTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.41.6 | Tableg3trunkcfgTable | not-accessible | mandatory | A list of g3trunkcfg entries. |
| 1.3.6.1.4.1.6889.2.8.1.41.6.1 | Rowg3trunkcfgEntry | not-accessible | mandatory | A g3trunkcfg entry containing objects of the g3trunkcfg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.41.6.1.1 | Columng3trunkcfgBoardNum | read-only | mandatory | A DisplayString Object that uniquely identifies a trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44… |
| 1.3.6.1.4.1.6889.2.8.1.41.6.1.2 | Columng3trunkcfgBoardType | read-only | mandatory | A DisplayString Object that contains a text description of the type of trunk board. |
| 1.3.6.1.4.1.6889.2.8.1.41.6.1.3 | Columng3trunkcfgCode | read-only | mandatory | A DisplayString Object that contains the code that defines the type of trunk board. |
| 1.3.6.1.4.1.6889.2.8.1.41.6.1.4 | Columng3trunkcfgVintage | read-only | mandatory | A DisplayString Object that contains the vintage of the trunk board. |
| 1.3.6.1.4.1.6889.2.8.1.41.6.1.5 | Columng3trunkcfgSuffix | read-only | mandatory | A DisplayString Object that contains the suffix to the code |
| 1.3.6.1.4.1.6889.2.8.1.42 | Nodeg3stationcfg | |||
| 1.3.6.1.4.1.6889.2.8.1.42.1 | Scalarg3stationcfgTage | read-only | mandatory | The number of timeticks since the station config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3stationcfgTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.42.2 | Scalarg3stationcfgTintvl | read-write | mandatory | An object containing the interval for which the station config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT re… |
| 1.3.6.1.4.1.6889.2.8.1.42.3 | Scalarg3stationcfgTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.42.4 | Scalarg3stationcfgTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.42.5 | Scalarg3stationcfgTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.42.6 | Tableg3stationcfgTable | not-accessible | mandatory | A list of g3stationcfg entries. |
| 1.3.6.1.4.1.6889.2.8.1.42.6.1 | Rowg3stationcfgEntry | not-accessible | mandatory | A g3stationcfg entry containing objects of the g3stationcfg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.42.6.1.1 | Columng3stationcfgBoardNum | read-only | mandatory | A DisplayString Object that uniquely identifies a station board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-… |
| 1.3.6.1.4.1.6889.2.8.1.42.6.1.2 | Columng3stationcfgBoardType | read-only | mandatory | A DisplayString Object that contains a text description of the type of station board. |
| 1.3.6.1.4.1.6889.2.8.1.42.6.1.3 | Columng3stationcfgCode | read-only | mandatory | A DisplayString Object that contains the code that defines the type of station board. |
| 1.3.6.1.4.1.6889.2.8.1.42.6.1.4 | Columng3stationcfgVintage | read-only | mandatory | A DisplayString Object that contains the vintage of the station board. |
| 1.3.6.1.4.1.6889.2.8.1.42.6.1.5 | Columng3stationcfgSuffix | read-only | mandatory | A DisplayString Object that contains the suffix to the code |
| 1.3.6.1.4.1.6889.2.8.1.43 | Nodeg3atmcfg | |||
| 1.3.6.1.4.1.6889.2.8.1.43.1 | Scalarg3atmcfgTage | read-only | mandatory | The number of timeticks since the atm config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmcfgTintvl object allows … |
| 1.3.6.1.4.1.6889.2.8.1.43.2 | Scalarg3atmcfgTintvl | read-write | mandatory | An object containing the interval for which the atm config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT reques… |
| 1.3.6.1.4.1.6889.2.8.1.43.3 | Scalarg3atmcfgTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.43.4 | Scalarg3atmcfgTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.43.5 | Scalarg3atmcfgTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.43.6 | Tableg3atmcfgTable | not-accessible | mandatory | A list of g3atmcfg entries. |
| 1.3.6.1.4.1.6889.2.8.1.43.6.1 | Rowg3atmcfgEntry | not-accessible | mandatory | A g3atmcfg entry containing objects of the g3atmcfg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.43.6.1.1 | Columng3atmcfgBoardNum | read-only | mandatory | A DisplayString Object that uniquely identifies a board used for ATM connectivity based on its location in the system. The syntax for the Board Number is as fo… |
| 1.3.6.1.4.1.6889.2.8.1.43.6.1.2 | Columng3atmcfgCode | read-only | mandatory | A DisplayString Object that contains the code that defines the type of ATM connectivity board. |
| 1.3.6.1.4.1.6889.2.8.1.43.6.1.3 | Columng3atmcfgBoardType | read-only | mandatory | A DisplayString Object that contains a text description of the type of ATM connectivity board. |
| 1.3.6.1.4.1.6889.2.8.1.43.6.1.4 | Columng3atmcfgVintage | read-only | mandatory | A DisplayString Object that contains the vintage of the ATM connectivity board. |
| 1.3.6.1.4.1.6889.2.8.1.43.6.1.5 | Columng3atmcfgName | read-only | mandatory | A DisplayString Object that contains the name of the ATM connectivity board. |
| 1.3.6.1.4.1.6889.2.8.1.43.6.1.6 | Columng3atmcfgSuffix | read-only | mandatory | A DisplayString Object that contains the suffix to the code |
| 1.3.6.1.4.1.6889.2.8.1.44 | Nodeg3aca | |||
| 1.3.6.1.4.1.6889.2.8.1.44.1 | Scalarg3acaTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3acaintvl object allows the Network M… |
| 1.3.6.1.4.1.6889.2.8.1.44.2 | Scalarg3acaTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.44.3 | Scalarg3acaTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.44.4 | Scalarg3acaTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.44.5 | Scalarg3acaTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.44.6 | Tableg3acaTable | not-accessible | mandatory | A list of g3aca entries. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1 | Rowg3acaEntry | not-accessible | mandatory | A g3aca entry containing objects of the g3aca information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.1 | Columng3acaTGNumber | read-only | mandatory | An object containing the trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.2 | Columng3acaTGMember | read-only | mandatory | An object containing the trunk group member number. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.3 | Columng3acaDayTime | read-only | mandatory | A DisplayString Object that contains the day and time at which either the threshold for short holding time calls was exceeded or long holding time call was rea… |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.4 | Columng3acaYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.5 | Columng3acaMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.6 | Columng3acaDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.7 | Columng3acaHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.8 | Columng3acaTGAccess | read-only | mandatory | An object containing the trunk access code for the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.9 | Columng3acaRefType | read-only | mandatory | A DisplayString Object that indicates whether the referral occurred as the result of too many short holding time calls or an excessively long holding time call. |
| 1.3.6.1.4.1.6889.2.8.1.44.6.1.10 | Columng3acaWideBand | read-only | mandatory | A DisplayString Object that indicates whether the call was a wideband call. |
| 1.3.6.1.4.1.6889.2.8.1.45 | Nodeg3atmtrunk | |||
| 1.3.6.1.4.1.6889.2.8.1.45.1 | Scalarg3atmtrunkTage | read-only | mandatory | The number of timeticks since the atm trunk data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmtrunkTintvl object allows… |
| 1.3.6.1.4.1.6889.2.8.1.45.2 | Scalarg3atmtrunkTintvl | read-write | mandatory | An object containing the interval for which the atm trunk data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request… |
| 1.3.6.1.4.1.6889.2.8.1.45.3 | Scalarg3atmtrunkTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.45.4 | Scalarg3atmtrunkTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.45.5 | Scalarg3atmtrunkTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.45.6 | Tableg3atmtrunkTable | not-accessible | mandatory | A list of g3atmtrunk entries. |
| 1.3.6.1.4.1.6889.2.8.1.45.6.1 | Rowg3atmtrunkEntry | not-accessible | mandatory | A g3atmtrunk entry containing objects of the g3atmtrunk information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.45.6.1.1 | Columng3atmtrunkLocation | read-only | mandatory | A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet… |
| 1.3.6.1.4.1.6889.2.8.1.45.6.1.2 | Columng3atmtrunkName | read-only | mandatory | A DisplayString Object that identifies the ATM trunk board by name. |
| 1.3.6.1.4.1.6889.2.8.1.45.6.1.3 | Columng3atmtrunkSynch | read-only | mandatory | A DisplayString Object that identifies whether the ATM trunk is synchronization capable (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.46 | Nodeg3atmportpg1 | |||
| 1.3.6.1.4.1.6889.2.8.1.46.1 | Scalarg3atmportpg1Tage | read-only | mandatory | The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg1Tintvl object allow… |
| 1.3.6.1.4.1.6889.2.8.1.46.2 | Scalarg3atmportpg1Tintvl | read-write | mandatory | An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request … |
| 1.3.6.1.4.1.6889.2.8.1.46.3 | Scalarg3atmportpg1Tdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.46.4 | Scalarg3atmportpg1Tretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.46.5 | Scalarg3atmportpg1Tcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.46.6 | Tableg3atmportpg1Table | not-accessible | mandatory | A list of g3atmportpg1 entries. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1 | Rowg3atmportpg1Entry | not-accessible | mandatory | A g3atmportpg1 entry containing objects of the g3atmportpg1 information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.1 | Columng3atmportpg1Location | read-only | mandatory | A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet… |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.2 | Columng3atmportpg1SGNumber1 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (1 to 90) on page 1 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.3 | Columng3atmportpg1SGNumber2 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.4 | Columng3atmportpg1SGNumber3 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.5 | Columng3atmportpg1SGNumber4 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.6 | Columng3atmportpg1SGNumber5 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.7 | Columng3atmportpg1SGNumber6 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.8 | Columng3atmportpg1SGNumber7 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.9 | Columng3atmportpg1SGNumber8 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.10 | Columng3atmportpg1SGNumber9 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.11 | Columng3atmportpg1SGNumber10 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.12 | Columng3atmportpg1SGNumber11 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.13 | Columng3atmportpg1SGNumber12 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.14 | Columng3atmportpg1SGNumber13 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.15 | Columng3atmportpg1SGNumber14 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.16 | Columng3atmportpg1SGNumber15 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.17 | Columng3atmportpg1SGNumber16 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.18 | Columng3atmportpg1SGNumber17 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.19 | Columng3atmportpg1SGNumber18 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.20 | Columng3atmportpg1SGNumber19 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.21 | Columng3atmportpg1SGNumber20 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.22 | Columng3atmportpg1SGNumber21 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.23 | Columng3atmportpg1SGNumber22 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.24 | Columng3atmportpg1SGNumber23 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.25 | Columng3atmportpg1SGNumber24 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.26 | Columng3atmportpg1SGNumber25 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.27 | Columng3atmportpg1SGNumber26 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.28 | Columng3atmportpg1SGNumber27 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.29 | Columng3atmportpg1SGNumber28 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.30 | Columng3atmportpg1SGNumber29 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.31 | Columng3atmportpg1SGNumber30 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.32 | Columng3atmportpg1SGNumber31 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.33 | Columng3atmportpg1SGNumber32 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.34 | Columng3atmportpg1SGNumber33 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.35 | Columng3atmportpg1SGNumber34 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.36 | Columng3atmportpg1SGNumber35 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.37 | Columng3atmportpg1SGNumber36 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.38 | Columng3atmportpg1SGNumber37 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.39 | Columng3atmportpg1SGNumber38 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.40 | Columng3atmportpg1SGNumber39 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.41 | Columng3atmportpg1SGNumber40 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.42 | Columng3atmportpg1SGNumber41 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.43 | Columng3atmportpg1SGNumber42 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.44 | Columng3atmportpg1SGNumber43 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.45 | Columng3atmportpg1SGNumber44 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.46 | Columng3atmportpg1SGNumber45 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.47 | Columng3atmportpg1SGNumber46 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.48 | Columng3atmportpg1SGNumber47 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.49 | Columng3atmportpg1SGNumber48 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.50 | Columng3atmportpg1SGNumber49 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.51 | Columng3atmportpg1SGNumber50 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.52 | Columng3atmportpg1SGNumber51 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.53 | Columng3atmportpg1SGNumber52 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.54 | Columng3atmportpg1SGNumber53 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.55 | Columng3atmportpg1SGNumber54 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.56 | Columng3atmportpg1SGNumber55 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.57 | Columng3atmportpg1SGNumber56 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.58 | Columng3atmportpg1SGNumber57 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.59 | Columng3atmportpg1SGNumber58 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.60 | Columng3atmportpg1SGNumber59 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.61 | Columng3atmportpg1SGNumber60 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.62 | Columng3atmportpg1SGNumber61 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.63 | Columng3atmportpg1SGNumber62 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.64 | Columng3atmportpg1SGNumber63 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.65 | Columng3atmportpg1SGNumber64 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.66 | Columng3atmportpg1SGNumber65 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.67 | Columng3atmportpg1SGNumber66 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.68 | Columng3atmportpg1SGNumber67 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.69 | Columng3atmportpg1SGNumber68 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.70 | Columng3atmportpg1SGNumber69 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.71 | Columng3atmportpg1SGNumber70 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.72 | Columng3atmportpg1SGNumber71 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.73 | Columng3atmportpg1SGNumber72 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.74 | Columng3atmportpg1SGNumber73 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.75 | Columng3atmportpg1SGNumber74 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.76 | Columng3atmportpg1SGNumber75 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.77 | Columng3atmportpg1SGNumber76 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.78 | Columng3atmportpg1SGNumber77 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.79 | Columng3atmportpg1SGNumber78 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.80 | Columng3atmportpg1SGNumber79 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.81 | Columng3atmportpg1SGNumber80 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.82 | Columng3atmportpg1SGNumber81 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.83 | Columng3atmportpg1SGNumber82 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.84 | Columng3atmportpg1SGNumber83 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.85 | Columng3atmportpg1SGNumber84 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.86 | Columng3atmportpg1SGNumber85 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.87 | Columng3atmportpg1SGNumber86 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.88 | Columng3atmportpg1SGNumber87 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.89 | Columng3atmportpg1SGNumber88 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.90 | Columng3atmportpg1SGNumber89 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.91 | Columng3atmportpg1SGNumber90 | read-only | mandatory | See DESCRIPTION of g3atmportpg1SGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.92 | Columng3atmportpg1TGNumber1 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (1 to 90) on page 1 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.93 | Columng3atmportpg1TGNumber2 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.94 | Columng3atmportpg1TGNumber3 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.95 | Columng3atmportpg1TGNumber4 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.96 | Columng3atmportpg1TGNumber5 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.97 | Columng3atmportpg1TGNumber6 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.98 | Columng3atmportpg1TGNumber7 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.99 | Columng3atmportpg1TGNumber8 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.100 | Columng3atmportpg1TGNumber9 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.101 | Columng3atmportpg1TGNumber10 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.102 | Columng3atmportpg1TGNumber11 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.103 | Columng3atmportpg1TGNumber12 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.104 | Columng3atmportpg1TGNumber13 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.105 | Columng3atmportpg1TGNumber14 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.106 | Columng3atmportpg1TGNumber15 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.107 | Columng3atmportpg1TGNumber16 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.108 | Columng3atmportpg1TGNumber17 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.109 | Columng3atmportpg1TGNumber18 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.110 | Columng3atmportpg1TGNumber19 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.111 | Columng3atmportpg1TGNumber20 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.112 | Columng3atmportpg1TGNumber21 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.113 | Columng3atmportpg1TGNumber22 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.114 | Columng3atmportpg1TGNumber23 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.115 | Columng3atmportpg1TGNumber24 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.116 | Columng3atmportpg1TGNumber25 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.117 | Columng3atmportpg1TGNumber26 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.118 | Columng3atmportpg1TGNumber27 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.119 | Columng3atmportpg1TGNumber28 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.120 | Columng3atmportpg1TGNumber29 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.121 | Columng3atmportpg1TGNumber30 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.122 | Columng3atmportpg1TGNumber31 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.123 | Columng3atmportpg1TGNumber32 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.124 | Columng3atmportpg1TGNumber33 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.125 | Columng3atmportpg1TGNumber34 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.126 | Columng3atmportpg1TGNumber35 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.127 | Columng3atmportpg1TGNumber36 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.128 | Columng3atmportpg1TGNumber37 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.129 | Columng3atmportpg1TGNumber38 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.130 | Columng3atmportpg1TGNumber39 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.131 | Columng3atmportpg1TGNumber40 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.132 | Columng3atmportpg1TGNumber41 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.133 | Columng3atmportpg1TGNumber42 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.134 | Columng3atmportpg1TGNumber43 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.135 | Columng3atmportpg1TGNumber44 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.136 | Columng3atmportpg1TGNumber45 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.137 | Columng3atmportpg1TGNumber46 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.138 | Columng3atmportpg1TGNumber47 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.139 | Columng3atmportpg1TGNumber48 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.140 | Columng3atmportpg1TGNumber49 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.141 | Columng3atmportpg1TGNumber50 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.142 | Columng3atmportpg1TGNumber51 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.143 | Columng3atmportpg1TGNumber52 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.144 | Columng3atmportpg1TGNumber53 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.145 | Columng3atmportpg1TGNumber54 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.146 | Columng3atmportpg1TGNumber55 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.147 | Columng3atmportpg1TGNumber56 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.148 | Columng3atmportpg1TGNumber57 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.149 | Columng3atmportpg1TGNumber58 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.150 | Columng3atmportpg1TGNumber59 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.151 | Columng3atmportpg1TGNumber60 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.152 | Columng3atmportpg1TGNumber61 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.153 | Columng3atmportpg1TGNumber62 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.154 | Columng3atmportpg1TGNumber63 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.155 | Columng3atmportpg1TGNumber64 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.156 | Columng3atmportpg1TGNumber65 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.157 | Columng3atmportpg1TGNumber66 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.158 | Columng3atmportpg1TGNumber67 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.159 | Columng3atmportpg1TGNumber68 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.160 | Columng3atmportpg1TGNumber69 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.161 | Columng3atmportpg1TGNumber70 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.162 | Columng3atmportpg1TGNumber71 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.163 | Columng3atmportpg1TGNumber72 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.164 | Columng3atmportpg1TGNumber73 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.165 | Columng3atmportpg1TGNumber74 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.166 | Columng3atmportpg1TGNumber75 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.167 | Columng3atmportpg1TGNumber76 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.168 | Columng3atmportpg1TGNumber77 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.169 | Columng3atmportpg1TGNumber78 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.170 | Columng3atmportpg1TGNumber79 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.171 | Columng3atmportpg1TGNumber80 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.172 | Columng3atmportpg1TGNumber81 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.173 | Columng3atmportpg1TGNumber82 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.174 | Columng3atmportpg1TGNumber83 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.175 | Columng3atmportpg1TGNumber84 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.176 | Columng3atmportpg1TGNumber85 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.177 | Columng3atmportpg1TGNumber86 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.178 | Columng3atmportpg1TGNumber87 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.179 | Columng3atmportpg1TGNumber88 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.180 | Columng3atmportpg1TGNumber89 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.46.6.1.181 | Columng3atmportpg1TGNumber90 | read-only | mandatory | See DESCRIPTION of g3atmportpg1TGNumber1. |
| 1.3.6.1.4.1.6889.2.8.1.47 | Nodeg3atmportpg2 | |||
| 1.3.6.1.4.1.6889.2.8.1.47.1 | Scalarg3atmportpg2Tage | read-only | mandatory | The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg2Tintvl object allow… |
| 1.3.6.1.4.1.6889.2.8.1.47.2 | Scalarg3atmportpg2Tintvl | read-write | mandatory | An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request … |
| 1.3.6.1.4.1.6889.2.8.1.47.3 | Scalarg3atmportpg2Tdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.47.4 | Scalarg3atmportpg2Tretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.47.5 | Scalarg3atmportpg2Tcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.47.6 | Tableg3atmportpg2Table | not-accessible | mandatory | A list of g3atmportpg2 entries. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1 | Rowg3atmportpg2Entry | not-accessible | mandatory | A g3atmportpg2 entry containing objects of the g3atmportpg2 information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.1 | Columng3atmportpg2Location | read-only | mandatory | A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet… |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.2 | Columng3atmportpg2SGNumber91 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (91 to 180) on page 2 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.3 | Columng3atmportpg2SGNumber92 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.4 | Columng3atmportpg2SGNumber93 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.5 | Columng3atmportpg2SGNumber94 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.6 | Columng3atmportpg2SGNumber95 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.7 | Columng3atmportpg2SGNumber96 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.8 | Columng3atmportpg2SGNumber97 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.9 | Columng3atmportpg2SGNumber98 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.10 | Columng3atmportpg2SGNumber99 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.11 | Columng3atmportpg2SGNumber100 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.12 | Columng3atmportpg2SGNumber101 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.13 | Columng3atmportpg2SGNumber102 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.14 | Columng3atmportpg2SGNumber103 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.15 | Columng3atmportpg2SGNumber104 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.16 | Columng3atmportpg2SGNumber105 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.17 | Columng3atmportpg2SGNumber106 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.18 | Columng3atmportpg2SGNumber107 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.19 | Columng3atmportpg2SGNumber108 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.20 | Columng3atmportpg2SGNumber109 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.21 | Columng3atmportpg2SGNumber110 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.22 | Columng3atmportpg2SGNumber111 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.23 | Columng3atmportpg2SGNumber112 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.24 | Columng3atmportpg2SGNumber113 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.25 | Columng3atmportpg2SGNumber114 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.26 | Columng3atmportpg2SGNumber115 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.27 | Columng3atmportpg2SGNumber116 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.28 | Columng3atmportpg2SGNumber117 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.29 | Columng3atmportpg2SGNumber118 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.30 | Columng3atmportpg2SGNumber119 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.31 | Columng3atmportpg2SGNumber120 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.32 | Columng3atmportpg2SGNumber121 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.33 | Columng3atmportpg2SGNumber122 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.34 | Columng3atmportpg2SGNumber123 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.35 | Columng3atmportpg2SGNumber124 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.36 | Columng3atmportpg2SGNumber125 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.37 | Columng3atmportpg2SGNumber126 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.38 | Columng3atmportpg2SGNumber127 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.39 | Columng3atmportpg2SGNumber128 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.40 | Columng3atmportpg2SGNumber129 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.41 | Columng3atmportpg2SGNumber130 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.42 | Columng3atmportpg2SGNumber131 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.43 | Columng3atmportpg2SGNumber132 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.44 | Columng3atmportpg2SGNumber133 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.45 | Columng3atmportpg2SGNumber134 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.46 | Columng3atmportpg2SGNumber135 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.47 | Columng3atmportpg2SGNumber136 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.48 | Columng3atmportpg2SGNumber137 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.49 | Columng3atmportpg2SGNumber138 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.50 | Columng3atmportpg2SGNumber139 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.51 | Columng3atmportpg2SGNumber140 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.52 | Columng3atmportpg2SGNumber141 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.53 | Columng3atmportpg2SGNumber142 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.54 | Columng3atmportpg2SGNumber143 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.55 | Columng3atmportpg2SGNumber144 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.56 | Columng3atmportpg2SGNumber145 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.57 | Columng3atmportpg2SGNumber146 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.58 | Columng3atmportpg2SGNumber147 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.59 | Columng3atmportpg2SGNumber148 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.60 | Columng3atmportpg2SGNumber149 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.61 | Columng3atmportpg2SGNumber150 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.62 | Columng3atmportpg2SGNumber151 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.63 | Columng3atmportpg2SGNumber152 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.64 | Columng3atmportpg2SGNumber153 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.65 | Columng3atmportpg2SGNumber154 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.66 | Columng3atmportpg2SGNumber155 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.67 | Columng3atmportpg2SGNumber156 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.68 | Columng3atmportpg2SGNumber157 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.69 | Columng3atmportpg2SGNumber158 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.70 | Columng3atmportpg2SGNumber159 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.71 | Columng3atmportpg2SGNumber160 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.72 | Columng3atmportpg2SGNumber161 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.73 | Columng3atmportpg2SGNumber162 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.74 | Columng3atmportpg2SGNumber163 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.75 | Columng3atmportpg2SGNumber164 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.76 | Columng3atmportpg2SGNumber165 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.77 | Columng3atmportpg2SGNumber166 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.78 | Columng3atmportpg2SGNumber167 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.79 | Columng3atmportpg2SGNumber168 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.80 | Columng3atmportpg2SGNumber169 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.81 | Columng3atmportpg2SGNumber170 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.82 | Columng3atmportpg2SGNumber171 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.83 | Columng3atmportpg2SGNumber172 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.84 | Columng3atmportpg2SGNumber173 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.85 | Columng3atmportpg2SGNumber174 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.86 | Columng3atmportpg2SGNumber175 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.87 | Columng3atmportpg2SGNumber176 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.88 | Columng3atmportpg2SGNumber177 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.89 | Columng3atmportpg2SGNumber178 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.90 | Columng3atmportpg2SGNumber179 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.91 | Columng3atmportpg2SGNumber180 | read-only | mandatory | See DESCRIPTION of g3atmportpg2SGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.92 | Columng3atmportpg2TGNumber91 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (91 to 180) on page 2 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.93 | Columng3atmportpg2TGNumber92 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.94 | Columng3atmportpg2TGNumber93 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.95 | Columng3atmportpg2TGNumber94 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.96 | Columng3atmportpg2TGNumber95 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.97 | Columng3atmportpg2TGNumber96 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.98 | Columng3atmportpg2TGNumber97 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.99 | Columng3atmportpg2TGNumber98 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.100 | Columng3atmportpg2TGNumber99 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.101 | Columng3atmportpg2TGNumber100 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.102 | Columng3atmportpg2TGNumber101 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.103 | Columng3atmportpg2TGNumber102 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.104 | Columng3atmportpg2TGNumber103 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.105 | Columng3atmportpg2TGNumber104 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.106 | Columng3atmportpg2TGNumber105 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.107 | Columng3atmportpg2TGNumber106 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.108 | Columng3atmportpg2TGNumber107 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.109 | Columng3atmportpg2TGNumber108 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.110 | Columng3atmportpg2TGNumber109 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.111 | Columng3atmportpg2TGNumber110 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.112 | Columng3atmportpg2TGNumber111 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.113 | Columng3atmportpg2TGNumber112 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.114 | Columng3atmportpg2TGNumber113 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.115 | Columng3atmportpg2TGNumber114 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.116 | Columng3atmportpg2TGNumber115 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.117 | Columng3atmportpg2TGNumber116 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.118 | Columng3atmportpg2TGNumber117 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.119 | Columng3atmportpg2TGNumber118 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.120 | Columng3atmportpg2TGNumber119 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.121 | Columng3atmportpg2TGNumber120 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.122 | Columng3atmportpg2TGNumber121 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.123 | Columng3atmportpg2TGNumber122 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.124 | Columng3atmportpg2TGNumber123 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.125 | Columng3atmportpg2TGNumber124 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.126 | Columng3atmportpg2TGNumber125 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.127 | Columng3atmportpg2TGNumber126 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.128 | Columng3atmportpg2TGNumber127 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.129 | Columng3atmportpg2TGNumber128 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.130 | Columng3atmportpg2TGNumber129 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.131 | Columng3atmportpg2TGNumber130 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.132 | Columng3atmportpg2TGNumber131 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.133 | Columng3atmportpg2TGNumber132 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.134 | Columng3atmportpg2TGNumber133 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.135 | Columng3atmportpg2TGNumber134 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.136 | Columng3atmportpg2TGNumber135 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.137 | Columng3atmportpg2TGNumber136 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.138 | Columng3atmportpg2TGNumber137 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.139 | Columng3atmportpg2TGNumber138 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.140 | Columng3atmportpg2TGNumber139 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.141 | Columng3atmportpg2TGNumber140 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.142 | Columng3atmportpg2TGNumber141 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.143 | Columng3atmportpg2TGNumber142 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.144 | Columng3atmportpg2TGNumber143 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.145 | Columng3atmportpg2TGNumber144 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.146 | Columng3atmportpg2TGNumber145 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.147 | Columng3atmportpg2TGNumber146 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.148 | Columng3atmportpg2TGNumber147 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.149 | Columng3atmportpg2TGNumber148 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.150 | Columng3atmportpg2TGNumber149 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.151 | Columng3atmportpg2TGNumber150 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.152 | Columng3atmportpg2TGNumber151 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.153 | Columng3atmportpg2TGNumber152 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.154 | Columng3atmportpg2TGNumber153 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.155 | Columng3atmportpg2TGNumber154 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.156 | Columng3atmportpg2TGNumber155 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.157 | Columng3atmportpg2TGNumber156 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.158 | Columng3atmportpg2TGNumber157 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.159 | Columng3atmportpg2TGNumber158 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.160 | Columng3atmportpg2TGNumber159 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.161 | Columng3atmportpg2TGNumber160 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.162 | Columng3atmportpg2TGNumber161 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.163 | Columng3atmportpg2TGNumber162 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.164 | Columng3atmportpg2TGNumber163 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.165 | Columng3atmportpg2TGNumber164 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.166 | Columng3atmportpg2TGNumber165 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.167 | Columng3atmportpg2TGNumber166 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.168 | Columng3atmportpg2TGNumber167 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.169 | Columng3atmportpg2TGNumber168 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.170 | Columng3atmportpg2TGNumber169 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.171 | Columng3atmportpg2TGNumber170 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.172 | Columng3atmportpg2TGNumber171 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.173 | Columng3atmportpg2TGNumber172 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.174 | Columng3atmportpg2TGNumber173 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.175 | Columng3atmportpg2TGNumber174 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.176 | Columng3atmportpg2TGNumber175 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.177 | Columng3atmportpg2TGNumber176 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.178 | Columng3atmportpg2TGNumber177 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.179 | Columng3atmportpg2TGNumber178 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.180 | Columng3atmportpg2TGNumber179 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.47.6.1.181 | Columng3atmportpg2TGNumber180 | read-only | mandatory | See DESCRIPTION of g3atmportpg2TGNumber91. |
| 1.3.6.1.4.1.6889.2.8.1.48 | Nodeg3atmportpg3 | |||
| 1.3.6.1.4.1.6889.2.8.1.48.1 | Scalarg3atmportpg3Tage | read-only | mandatory | The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg3Tintvl object allow… |
| 1.3.6.1.4.1.6889.2.8.1.48.2 | Scalarg3atmportpg3Tintvl | read-write | mandatory | An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request … |
| 1.3.6.1.4.1.6889.2.8.1.48.3 | Scalarg3atmportpg3Tdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.48.4 | Scalarg3atmportpg3Tretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.48.5 | Scalarg3atmportpg3Tcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.48.6 | Tableg3atmportpg3Table | not-accessible | mandatory | A list of g3atmportpg3 entries. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1 | Rowg3atmportpg3Entry | not-accessible | mandatory | A g3atmportpg3 entry containing objects of the g3atmportpg3 information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.1 | Columng3atmportpg3Location | read-only | mandatory | A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet… |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.2 | Columng3atmportpg3SGNumber181 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (181 to 244) on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.3 | Columng3atmportpg3SGNumber182 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.4 | Columng3atmportpg3SGNumber183 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.5 | Columng3atmportpg3SGNumber184 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.6 | Columng3atmportpg3SGNumber185 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.7 | Columng3atmportpg3SGNumber186 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.8 | Columng3atmportpg3SGNumber187 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.9 | Columng3atmportpg3SGNumber188 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.10 | Columng3atmportpg3SGNumber189 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.11 | Columng3atmportpg3SGNumber190 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.12 | Columng3atmportpg3SGNumber191 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.13 | Columng3atmportpg3SGNumber192 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.14 | Columng3atmportpg3SGNumber193 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.15 | Columng3atmportpg3SGNumber194 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.16 | Columng3atmportpg3SGNumber195 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.17 | Columng3atmportpg3SGNumber196 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.18 | Columng3atmportpg3SGNumber197 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.19 | Columng3atmportpg3SGNumber198 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.20 | Columng3atmportpg3SGNumber199 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.21 | Columng3atmportpg3SGNumber200 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.22 | Columng3atmportpg3SGNumber201 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.23 | Columng3atmportpg3SGNumber202 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.24 | Columng3atmportpg3SGNumber203 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.25 | Columng3atmportpg3SGNumber204 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.26 | Columng3atmportpg3SGNumber205 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.27 | Columng3atmportpg3SGNumber206 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.28 | Columng3atmportpg3SGNumber207 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.29 | Columng3atmportpg3SGNumber208 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.30 | Columng3atmportpg3SGNumber209 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.31 | Columng3atmportpg3SGNumber210 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.32 | Columng3atmportpg3SGNumber211 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.33 | Columng3atmportpg3SGNumber212 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.34 | Columng3atmportpg3SGNumber213 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.35 | Columng3atmportpg3SGNumber214 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.36 | Columng3atmportpg3SGNumber215 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.37 | Columng3atmportpg3SGNumber216 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.38 | Columng3atmportpg3SGNumber217 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.39 | Columng3atmportpg3SGNumber218 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.40 | Columng3atmportpg3SGNumber219 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.41 | Columng3atmportpg3SGNumber220 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.42 | Columng3atmportpg3SGNumber221 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.43 | Columng3atmportpg3SGNumber222 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.44 | Columng3atmportpg3SGNumber223 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.45 | Columng3atmportpg3SGNumber224 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.46 | Columng3atmportpg3SGNumber225 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.47 | Columng3atmportpg3SGNumber226 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.48 | Columng3atmportpg3SGNumber227 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.49 | Columng3atmportpg3SGNumber228 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.50 | Columng3atmportpg3SGNumber229 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.51 | Columng3atmportpg3SGNumber230 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.52 | Columng3atmportpg3SGNumber231 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.53 | Columng3atmportpg3SGNumber232 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.54 | Columng3atmportpg3SGNumber233 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.55 | Columng3atmportpg3SGNumber234 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.56 | Columng3atmportpg3SGNumber235 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.57 | Columng3atmportpg3SGNumber236 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.58 | Columng3atmportpg3SGNumber237 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.59 | Columng3atmportpg3SGNumber238 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.60 | Columng3atmportpg3SGNumber239 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.61 | Columng3atmportpg3SGNumber240 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.62 | Columng3atmportpg3SGNumber241 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.63 | Columng3atmportpg3SGNumber242 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.64 | Columng3atmportpg3SGNumber243 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.65 | Columng3atmportpg3SGNumber244 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.66 | Columng3atmportpg3SGNumber245 | read-only | mandatory | See DESCRIPTION of g3atmportpg3SGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.67 | Columng3atmportpg3SGNumber246 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 246 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.68 | Columng3atmportpg3SGNumber247 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 247 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.69 | Columng3atmportpg3SGNumber248 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 248 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.70 | Columng3atmportpg3SGNumber249 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 249 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.71 | Columng3atmportpg3SGNumber250 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 250 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.72 | Columng3atmportpg3SGNumber251 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 251 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.73 | Columng3atmportpg3SGNumber252 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 252 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.74 | Columng3atmportpg3SGNumber253 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 253 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.75 | Columng3atmportpg3SGNumber254 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 254 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.76 | Columng3atmportpg3SGNumber255 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 255 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.77 | Columng3atmportpg3SGNumber256 | read-only | mandatory | An INTEGER Object that uniquely identifies the signaling group associated with ATM port 256 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.78 | Columng3atmportpg3TGNumber181 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (181 to 244) on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.79 | Columng3atmportpg3TGNumber182 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.80 | Columng3atmportpg3TGNumber183 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.81 | Columng3atmportpg3TGNumber184 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.82 | Columng3atmportpg3TGNumber185 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.83 | Columng3atmportpg3TGNumber186 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.84 | Columng3atmportpg3TGNumber187 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.85 | Columng3atmportpg3TGNumber188 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.86 | Columng3atmportpg3TGNumber189 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.87 | Columng3atmportpg3TGNumber190 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.88 | Columng3atmportpg3TGNumber191 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.89 | Columng3atmportpg3TGNumber192 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.90 | Columng3atmportpg3TGNumber193 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.91 | Columng3atmportpg3TGNumber194 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.92 | Columng3atmportpg3TGNumber195 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.93 | Columng3atmportpg3TGNumber196 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.94 | Columng3atmportpg3TGNumber197 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.95 | Columng3atmportpg3TGNumber198 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.96 | Columng3atmportpg3TGNumber199 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.97 | Columng3atmportpg3TGNumber200 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.98 | Columng3atmportpg3TGNumber201 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.99 | Columng3atmportpg3TGNumber202 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.100 | Columng3atmportpg3TGNumber203 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.101 | Columng3atmportpg3TGNumber204 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.102 | Columng3atmportpg3TGNumber205 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.103 | Columng3atmportpg3TGNumber206 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.104 | Columng3atmportpg3TGNumber207 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.105 | Columng3atmportpg3TGNumber208 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.106 | Columng3atmportpg3TGNumber209 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.107 | Columng3atmportpg3TGNumber210 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.108 | Columng3atmportpg3TGNumber211 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.109 | Columng3atmportpg3TGNumber212 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.110 | Columng3atmportpg3TGNumber213 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.111 | Columng3atmportpg3TGNumber214 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.112 | Columng3atmportpg3TGNumber215 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.113 | Columng3atmportpg3TGNumber216 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.114 | Columng3atmportpg3TGNumber217 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.115 | Columng3atmportpg3TGNumber218 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.116 | Columng3atmportpg3TGNumber219 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.117 | Columng3atmportpg3TGNumber220 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.118 | Columng3atmportpg3TGNumber221 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.119 | Columng3atmportpg3TGNumber222 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.120 | Columng3atmportpg3TGNumber223 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.121 | Columng3atmportpg3TGNumber224 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.122 | Columng3atmportpg3TGNumber225 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.123 | Columng3atmportpg3TGNumber226 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.124 | Columng3atmportpg3TGNumber227 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.125 | Columng3atmportpg3TGNumber228 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.126 | Columng3atmportpg3TGNumber229 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.127 | Columng3atmportpg3TGNumber230 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.128 | Columng3atmportpg3TGNumber231 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.129 | Columng3atmportpg3TGNumber232 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.130 | Columng3atmportpg3TGNumber233 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.131 | Columng3atmportpg3TGNumber234 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.132 | Columng3atmportpg3TGNumber235 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.133 | Columng3atmportpg3TGNumber236 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.134 | Columng3atmportpg3TGNumber237 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.135 | Columng3atmportpg3TGNumber238 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.136 | Columng3atmportpg3TGNumber239 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.137 | Columng3atmportpg3TGNumber240 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.138 | Columng3atmportpg3TGNumber241 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.139 | Columng3atmportpg3TGNumber242 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.140 | Columng3atmportpg3TGNumber243 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.141 | Columng3atmportpg3TGNumber244 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.142 | Columng3atmportpg3TGNumber245 | read-only | mandatory | See DESCRIPTION of g3atmportpg3TGNumber181. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.143 | Columng3atmportpg3TGNumber246 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 246 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.144 | Columng3atmportpg3TGNumber247 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 247 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.145 | Columng3atmportpg3TGNumber248 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 248 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.146 | Columng3atmportpg3TGNumber249 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 249 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.147 | Columng3atmportpg3TGNumber250 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 250 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.148 | Columng3atmportpg3TGNumber251 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 251 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.149 | Columng3atmportpg3TGNumber252 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 252 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.150 | Columng3atmportpg3TGNumber253 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 253 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.151 | Columng3atmportpg3TGNumber254 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 254 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.152 | Columng3atmportpg3TGNumber255 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 255 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.48.6.1.153 | Columng3atmportpg3TGNumber256 | read-only | mandatory | An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 256 on page 3 of the form. |
| 1.3.6.1.4.1.6889.2.8.1.49 | Nodeg3dmodule | |||
| 1.3.6.1.4.1.6889.2.8.1.49.1 | Scalarg3dmoduleTage | read-only | mandatory | The number of timeticks since the data-module data was last extracted from the switch by the Proxy Agent. This object along with the g3dmoduleintvl object allo… |
| 1.3.6.1.4.1.6889.2.8.1.49.2 | Scalarg3dmoduleTintvl | read-write | mandatory | An object containing the interval for which the data-module data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT reque… |
| 1.3.6.1.4.1.6889.2.8.1.49.3 | Scalarg3dmoduleTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.49.4 | Scalarg3dmoduleTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.49.5 | Scalarg3dmoduleTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.49.6 | Tableg3dmoduleTable | not-accessible | mandatory | A list of g3dmodule entries. |
| 1.3.6.1.4.1.6889.2.8.1.49.6.1 | Rowg3dmoduleEntry | not-accessible | mandatory | A g3dmodule entry containing objects of the g3dmodule information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.49.6.1.1 | Columng3dmoduleExtension | read-only | mandatory | A DisplayString Object that uniquely identifies an administered data module. |
| 1.3.6.1.4.1.6889.2.8.1.49.6.1.2 | Columng3dmoduleType | read-only | mandatory | A DisplayString Object containing the data module type. |
| 1.3.6.1.4.1.6889.2.8.1.49.6.1.3 | Columng3dmoduleName | read-only | mandatory | A DisplayString Object containing the name assigned to the data module. |
| 1.3.6.1.4.1.6889.2.8.1.49.6.1.4 | Columng3dmodulePort | read-only | mandatory | A DisplayString Object that uniquely identifies a data-module port based on its location in the system. The syntax for the Port location is as follows: cabinet… |
| 1.3.6.1.4.1.6889.2.8.1.50 | Nodeg3occsum | |||
| 1.3.6.1.4.1.6889.2.8.1.50.1 | Scalarg3occsumTage | read-only | mandatory | The number of timeticks since the occupancy summary data was last extracted from the switch by the Proxy Agent. This object along with the g3occsumintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.50.2 | Scalarg3occsumTintvl | read-write | mandatory | An object containing the interval for which the occupancy summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT… |
| 1.3.6.1.4.1.6889.2.8.1.50.3 | Scalarg3occsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.50.4 | Scalarg3occsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.50.5 | Scalarg3occsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.50.6 | Tableg3occsumTable | not-accessible | mandatory | A list of g3occsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1 | Rowg3occsumEntry | not-accessible | mandatory | A g3occsum entry containing objects of the g3occsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.1 | Columng3occsumMeasHour | read-only | mandatory | An object containing the Peak Hour for occupancy. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.2 | Columng3occsumRunYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.3 | Columng3occsumRunMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.4 | Columng3occsumRunDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.5 | Columng3occsumRunHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.6 | Columng3occsumPeakHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.7 | Columng3occsumStatOcc | read-only | mandatory | An object containing the processor utilized by static processes. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.8 | Columng3occsumCPOcc | read-only | mandatory | An object containing the processor occupancy utilized by Call Processing processes. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.9 | Columng3occsumSMOcc | read-only | mandatory | An object containing the processor occupancy utilized by System Management processes. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.10 | Columng3occsumIdleOcc | read-only | mandatory | An object containing the processor occupancy that is unused. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.11 | Columng3occsumTotCall | read-only | mandatory | An object containing total calls connected for the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.12 | Columng3occsumTandCall | read-only | mandatory | An object containing trunk-to-trunk calls connected for the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.13 | Columng3occsumTotAtt | read-only | mandatory | An object containing the total calls attempted for the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.14 | Columng3occsumIntcomAtt | read-only | mandatory | An object containing the number of extension-to-extension calls on the same switch and partially completed calls for the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.15 | Columng3occsumIncAtt | read-only | mandatory | An object containing the number of incoming trunk seizures from public network facilities. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.16 | Columng3occsumOutAtt | read-only | mandatory | An object containing the number of outgoing trunk seizures that are made over public network facilities. |
| 1.3.6.1.4.1.6889.2.8.1.50.6.1.17 | Columng3occsumPnetAtt | read-only | mandatory | The number of incoming and outgoing seizures that are made over |
| 1.3.6.1.4.1.6889.2.8.1.51 | Nodeg3attdgrp | |||
| 1.3.6.1.4.1.6889.2.8.1.51.1 | Scalarg3attdgrpTage | read-only | mandatory | The number of timeticks since the attendant group data was last extracted from the switch by the Proxy Agent. This object along with the g3attdgrpintvl object … |
| 1.3.6.1.4.1.6889.2.8.1.51.2 | Scalarg3attdgrpTintvl | read-write | mandatory | An object containing the interval for which the attendant group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.51.3 | Scalarg3attdgrpTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.51.4 | Scalarg3attdgrpTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.51.5 | Scalarg3attdgrpTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.51.6 | Tableg3attdgrpTable | not-accessible | mandatory | A list of g3attdgrp entries. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1 | Rowg3attdgrpEntry | not-accessible | mandatory | A g3attdgrp entry containing objects of the g3attdgrp information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.1 | Columng3attdgrpMeasType | read-only | mandatory | A DisplayString object containing the measurement type (YEST PEAK, TODAY PEAK, LASTHOUR). |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.2 | Columng3attdgrpMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.3 | Columng3attdgrpRunYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.4 | Columng3attdgrpRunMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.5 | Columng3attdgrpRunDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.6 | Columng3attdgrpRunHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.7 | Columng3attdgrpGrpSiz | read-only | mandatory | An object containing the number of attendant positions that are administered for the groups. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.8 | Columng3attdgrpCallsAns | read-only | mandatory | An object containing the number of calls answered by all active attendants during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.9 | Columng3attdgrpCallsAbnd | read-only | mandatory | An object containing the number of calls that ring an attendant group and drop (hang up) before an attendant answers. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.10 | Columng3attdgrpCallsQued | read-only | mandatory | An object containing the total number of calls that were placed in the attendant queue (delayed) because no attendants were available. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.11 | Columng3attdgrpCallsHAbd | read-only | mandatory | An object containing the number of calls that abandon while the caller is in hold mode. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.12 | Columng3attdgrpCallsHeld | read-only | mandatory | An object containing the number of calls that are answered by the attendant group and then placed on hold. |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.13 | Columng3attdgrpTimeAvail | read-only | mandatory | An object containing the time during which the pos avail lamp is lit on all attendant consoles, and the attendants are not talking on calls but are available t… |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.14 | Columng3attdgrpTimeTalk | read-only | mandatory | An object containing the time that attendants are active or talking on a loop (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.15 | Columng3attdgrpTimeHeld | read-only | mandatory | An object containing the time that attendants have calls on hold (in seconds). |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.16 | Columng3attdgrpTimeAbnd | read-only | mandatory | An object containing the average amount of time that calls spend in queue and/or ringing at the console before the caller hangs up (in seconds). |
| 1.3.6.1.4.1.6889.2.8.1.51.6.1.17 | Columng3attdgrpSpeedAns | read-only | mandatory | An object containing the average elapsed time from when a call terminates at the attendant group to when the call is answered by an attendant (in seconds). |
| 1.3.6.1.4.1.6889.2.8.1.52 | Nodeg3attdpos | |||
| 1.3.6.1.4.1.6889.2.8.1.52.1 | Scalarg3attdposTage | read-only | mandatory | The number of timeticks since the attendant position data was last extracted from the switch by the Proxy Agent. This object along with the g3attdposintvl obje… |
| 1.3.6.1.4.1.6889.2.8.1.52.2 | Scalarg3attdposTintvl | read-write | mandatory | An object containing the interval for which the attendant position data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEX… |
| 1.3.6.1.4.1.6889.2.8.1.52.3 | Scalarg3attdposTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.52.4 | Scalarg3attdposTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.52.5 | Scalarg3attdposTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.52.6 | Tableg3attdposTable | not-accessible | mandatory | A list of g3attdpos entries. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1 | Rowg3attdposEntry | not-accessible | mandatory | A g3attdpos entry containing objects of the g3attdpos information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.1 | Columng3attdposAttdID | read-only | mandatory | An object containing an attendant number to identify which attendant data is being displayed. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.2 | Columng3attdposYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.3 | Columng3attdposMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.4 | Columng3attdposDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.5 | Columng3attdposHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.6 | Columng3attdposPeakHour | read-only | mandatory | An object containing the peak measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.7 | Columng3attdposPkTimeAvail | read-only | mandatory | An object containing the total time the attendant is availiable to receive calls during the polling interval (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.8 | Columng3attdposPkTimeTalk | read-only | mandatory | An object containing the total time the attendant is active on calls (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.9 | Columng3attdposPkTimeHeld | read-only | mandatory | An object containing the total time the attendant has calls on hold (in seconds). |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.10 | Columng3attdposPkCallsAns | read-only | mandatory | An object containing the total number of calls answered by the attendant (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.11 | Columng3attdposLastHour | read-only | mandatory | An object containing the last measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.12 | Columng3attdposTimeAvail | read-only | mandatory | An object containing the total time the attendant is availiable to receive calls during the polling interval (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.13 | Columng3attdposTimeTalk | read-only | mandatory | An object containing the total time the attendant is active on calls (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.14 | Columng3attdposTimeHeld | read-only | mandatory | An object containing the total time the attendant has calls on hold (in seconds). |
| 1.3.6.1.4.1.6889.2.8.1.52.6.1.15 | Columng3attdposCallsAns | read-only | mandatory | An object containing the total number of calls answered by the attendant (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.53 | Nodeg3trunksum | |||
| 1.3.6.1.4.1.6889.2.8.1.53.1 | Scalarg3trunksumTage | read-only | mandatory | The number of timeticks since the trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunksumintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.53.2 | Scalarg3trunksumTintvl | read-write | mandatory | An object containing the interval for which the trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.53.3 | Scalarg3trunksumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.53.4 | Scalarg3trunksumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.53.5 | Scalarg3trunksumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.53.6 | Tableg3trunksumTable | not-accessible | mandatory | A list of g3trunksum entries. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1 | Rowg3trunksumEntry | not-accessible | mandatory | A g3trunksum entry containing objects of the g3trunksum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.1 | Columng3trunksumTrunkGroup | read-only | mandatory | An object containing the trunk group number for which data has been collected. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.2 | Columng3trunksumMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.3 | Columng3trunksumRunYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.4 | Columng3trunksumRunMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.5 | Columng3trunksumRunDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.6 | Columng3trunksumRunHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.7 | Columng3trunksumGroupSize | read-only | mandatory | An object containing the number of administered trunks in the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.8 | Columng3trunksumTotalUsage | read-only | mandatory | An object containing the total time trunks are busy with calls during the measurement period (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.9 | Columng3trunksumTotalSeize | read-only | mandatory | An object containing the number of times a trunk was seized in the group including false starts, don't answer and busy. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.10 | Columng3trunksumIncSeize | read-only | mandatory | An object containing the number of incoming seizures carried on the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.11 | Columng3trunksumGrpOvfl | read-only | mandatory | An object containing the number of calls offered to a trunk group that are not carried or queued. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.12 | Columng3trunksumQueSiz | read-only | mandatory | An object containing a number (0-100) that identifies the number of slots assigned to the trunk group queue. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.13 | Columng3trunksumCallQued | read-only | mandatory | An object containing the total number of calls that entered the trunk group queue after finding all trunks busy. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.14 | Columng3trunksumQueOvf | read-only | mandatory | An object containing the total number of calls that were not queued because the queue was full. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.15 | Columng3trunksumQueAbd | read-only | mandatory | An object containing the total number of calls that were removed from the queue (i.e., due to queue timeout or user cancel) |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.16 | Columng3trunksumOutSrv | read-only | mandatory | An object containing the number of trunks in the group that are out of service (maintenance busy). |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.17 | Columng3trunksumPercentAtb | read-only | mandatory | An object containing the percentage of time all trunks in the group were simultaneously in use. |
| 1.3.6.1.4.1.6889.2.8.1.53.6.1.18 | Columng3trunksumPercentOutBlk | read-only | mandatory | An object containing the percentage of offered calls that are not carried on the group. |
| 1.3.6.1.4.1.6889.2.8.1.54 | Nodeg3pktrunksum | |||
| 1.3.6.1.4.1.6889.2.8.1.54.1 | Scalarg3pktrunksumTage | read-only | mandatory | The number of timeticks since the trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunksumintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.54.2 | Scalarg3pktrunksumTintvl | read-write | mandatory | An object containing the interval for which the trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.54.3 | Scalarg3pktrunksumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.54.4 | Scalarg3pktrunksumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.54.5 | Scalarg3pktrunksumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.54.6 | Tableg3pktrunksumTable | not-accessible | mandatory | A list of g3pktrunksum entries. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1 | Rowg3pktrunksumEntry | not-accessible | mandatory | A g3pktrunksum entry containing objects of the g3pktrunksum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.1 | Columng3pktrunksumTrunkGroup | read-only | mandatory | An object containing the trunk group number for which data has been collected. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.2 | Columng3pktrunksumMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.3 | Columng3pktrunksumRunYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.4 | Columng3pktrunksumRunMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.5 | Columng3pktrunksumRunDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.6 | Columng3pktrunksumRunHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.7 | Columng3pktrunksumGroupSize | read-only | mandatory | An object containing the number of administered trunks in the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.8 | Columng3pktrunksumTotalUsage | read-only | mandatory | An object containing the total time trunks are busy with calls during the measurement period (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.9 | Columng3pktrunksumTotalSeize | read-only | mandatory | An object containing the number of times a trunk was seized in the group including false starts, don't answer and busy. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.10 | Columng3pktrunksumIncSeize | read-only | mandatory | An object containing the number of incoming seizures carried on the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.11 | Columng3pktrunksumGrpOvfl | read-only | mandatory | An object containing the number of calls offered to a trunk group that are not carried or queued. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.12 | Columng3pktrunksumQueSiz | read-only | mandatory | An object containing a number (0-100) that identifies the number of slots assigned to the trunk group queue. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.13 | Columng3pktrunksumCallQued | read-only | mandatory | An object containing the total number of calls that entered the trunk group queue after finding all trunks busy. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.14 | Columng3pktrunksumQueOvf | read-only | mandatory | An object containing the total number of calls that were not queued because the queue was full. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.15 | Columng3pktrunksumQueAbd | read-only | mandatory | An object containing the total number of calls that were removed from the queue (i.e., due to queue timeout or user cancel) |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.16 | Columng3pktrunksumOutSrv | read-only | mandatory | An object containing the number of trunks in the group that are out of service (maintenance busy). |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.17 | Columng3pktrunksumPercentAtb | read-only | mandatory | An object containing the percentage of time all trunks in the group were simultaneously in use. |
| 1.3.6.1.4.1.6889.2.8.1.54.6.1.18 | Columng3pktrunksumPercentOutBlk | read-only | mandatory | An object containing the percentage of offered calls that are not carried on the group. |
| 1.3.6.1.4.1.6889.2.8.1.55 | Nodeg3trunkwbsum | |||
| 1.3.6.1.4.1.6889.2.8.1.55.1 | Scalarg3trunkwbsumTage | read-only | mandatory | The number of timeticks since the wideband trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkwbsumint… |
| 1.3.6.1.4.1.6889.2.8.1.55.2 | Scalarg3trunkwbsumTintvl | read-write | mandatory | An object containing the interval for which the wideband trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET… |
| 1.3.6.1.4.1.6889.2.8.1.55.3 | Scalarg3trunkwbsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.55.4 | Scalarg3trunkwbsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.55.5 | Scalarg3trunkwbsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.55.6 | Tableg3trunkwbsumTable | not-accessible | mandatory | A list of g3trunkwbsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1 | Rowg3trunkwbsumEntry | not-accessible | mandatory | A g3trunkwbsum entry containing objects of the g3trunkwbsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.1 | Columng3trunkwbsumTrunkGroup | read-only | mandatory | An object containing the trunk group number for which data has been collected. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.2 | Columng3trunkwbsumMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.3 | Columng3trunkwbsumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.4 | Columng3trunkwbsumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.5 | Columng3trunkwbsumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.6 | Columng3trunkwbsumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.7 | Columng3trunkwbsumTotalUsage | read-only | mandatory | An object containing the total wideband call usage for all trunks in the trunk group (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.8 | Columng3trunkwbsumTotalSeize | read-only | mandatory | An object containing the number of wideband call attempts. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.9 | Columng3trunkwbsumIncSeize | read-only | mandatory | An object containing the number of wideband incoming call attempts. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.10 | Columng3trunkwbsumGrpOvfl | read-only | mandatory | An object containing the number of wideband outgoing calls that were attempted when the remaining trunk group capacity was insufficient to accommodate the call… |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.11 | Columng3trunkwbsumOutSrv | read-only | mandatory | An object containing the number of wideband trunks in the group that are out of service (listed as maintenance busy). |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.12 | Columng3trunkwbsumPercentAtb | read-only | mandatory | An object containing the percentage of time that all trunks in the trunk group were simultaneously in use during the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.55.6.1.13 | Columng3trunkwbsumPercentOutBlk | read-only | mandatory | An object containing the percentage of offered wideband calls that are not carried on the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.56 | Nodeg3pktrunkwbsum | |||
| 1.3.6.1.4.1.6889.2.8.1.56.1 | Scalarg3pktrunkwbsumTage | read-only | mandatory | The number of timeticks since the wideband trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkwbsumint… |
| 1.3.6.1.4.1.6889.2.8.1.56.2 | Scalarg3pktrunkwbsumTintvl | read-write | mandatory | An object containing the interval for which the wideband trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET… |
| 1.3.6.1.4.1.6889.2.8.1.56.3 | Scalarg3pktrunkwbsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.56.4 | Scalarg3pktrunkwbsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.56.5 | Scalarg3pktrunkwbsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.56.6 | Tableg3pktrunkwbsumTable | not-accessible | mandatory | A list of g3pktrunkwbsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1 | Rowg3pktrunkwbsumEntry | not-accessible | mandatory | A g3pktrunkwbsum entry containing objects of the g3pktrunkwbsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.1 | Columng3pktrunkwbsumTrunkGroup | read-only | mandatory | An object containing the trunk group number for which data has been collected. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.2 | Columng3pktrunkwbsumMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.3 | Columng3pktrunkwbsumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.4 | Columng3pktrunkwbsumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.5 | Columng3pktrunkwbsumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.6 | Columng3pktrunkwbsumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.7 | Columng3pktrunkwbsumTotalUsage | read-only | mandatory | An object containing the total wideband call usage for all trunks in the trunk group (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.8 | Columng3pktrunkwbsumTotalSeize | read-only | mandatory | An object containing the number of wideband call attempts. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.9 | Columng3pktrunkwbsumIncSeize | read-only | mandatory | An object containing the number of wideband incoming call attempts. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.10 | Columng3pktrunkwbsumGrpOvfl | read-only | mandatory | An object containing the number of wideband outgoing calls that were attempted when the remaining trunk group capacity was insufficient to accommodate the call… |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.11 | Columng3pktrunkwbsumOutSrv | read-only | mandatory | An object containing the number of wideband trunks in the group that are out of service (listed as maintenance busy). |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.12 | Columng3pktrunkwbsumPercentAtb | read-only | mandatory | An object containing the percentage of time that all trunks in the trunk group were simultaneously in use during the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.56.6.1.13 | Columng3pktrunkwbsumPercentOutBlk | read-only | mandatory | An object containing the percentage of offered wideband calls that are not carried on the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.57 | Nodeg3pktrunkout | |||
| 1.3.6.1.4.1.6889.2.8.1.57.1 | Scalarg3pktrunkoutTage | read-only | mandatory | The number of timeticks since the outage trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3pktrunkoutintvl object … |
| 1.3.6.1.4.1.6889.2.8.1.57.2 | Scalarg3pktrunkoutTintvl | read-write | mandatory | An object containing the interval for which the trunk outage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.57.3 | Scalarg3pktrunkoutTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.57.4 | Scalarg3pktrunkoutTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.57.5 | Scalarg3pktrunkoutTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.57.6 | Tableg3pktrunkoutTable | not-accessible | mandatory | A list of g3pktrunkout entries. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1 | Rowg3pktrunkoutEntry | not-accessible | mandatory | A g3pktrunkout entry containing objects of the g3pktrunkout information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1.1 | Columng3pktrunkoutTrunkGroup | read-only | mandatory | An object containing the trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1.2 | Columng3pktrunkoutMember | read-only | mandatory | An object containing the group member number. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1.3 | Columng3pktrunkoutYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1.4 | Columng3pktrunkoutMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1.5 | Columng3pktrunkoutDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1.6 | Columng3pktrunkoutHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.57.6.1.7 | Columng3pktrunkoutOutages | read-only | mandatory | An object containing the number of times the group member is sampled as out of service over the measurement period. |
| 1.3.6.1.4.1.6889.2.8.1.58 | Nodeg3pktrunklight | |||
| 1.3.6.1.4.1.6889.2.8.1.58.1 | Scalarg3pktrunklightTage | read-only | mandatory | The number of timeticks since the lightly used trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3pktrunklightintvl… |
| 1.3.6.1.4.1.6889.2.8.1.58.2 | Scalarg3pktrunklightTintvl | read-write | mandatory | An object containing the interval for which the lightly used trunk data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEX… |
| 1.3.6.1.4.1.6889.2.8.1.58.3 | Scalarg3pktrunklightTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.58.4 | Scalarg3pktrunklightTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.58.5 | Scalarg3pktrunklightTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.58.6 | Tableg3pktrunklightTable | not-accessible | mandatory | A list of g3pktrunklight entries. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1 | Rowg3pktrunklightEntry | not-accessible | mandatory | A g3pktrunklight entry containing objects of the g3pktrunklight information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1.1 | Columng3pktrunklightTrunkGroup | read-only | mandatory | An object containing the trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1.2 | Columng3pktrunklightMember | read-only | mandatory | An object containing the group member number. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1.3 | Columng3pktrunklightYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1.4 | Columng3pktrunklightMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1.5 | Columng3pktrunklightDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1.6 | Columng3pktrunklightHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.58.6.1.7 | Columng3pktrunklightCarried | read-only | mandatory | An object containing the number of calls carried on the trunk member over the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.59 | Nodeg3pnblock | |||
| 1.3.6.1.4.1.6889.2.8.1.59.1 | Scalarg3pnblockTage | read-only | mandatory | The number of timeticks since the port network blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3pnblockintvl o… |
| 1.3.6.1.4.1.6889.2.8.1.59.2 | Scalarg3pnblockTintvl | read-write | mandatory | An object containing the interval for which the port network blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-… |
| 1.3.6.1.4.1.6889.2.8.1.59.3 | Scalarg3pnblockTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.59.4 | Scalarg3pnblockTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.59.5 | Scalarg3pnblockTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.59.6 | Tableg3pnblockTable | not-accessible | mandatory | A list of g3pnblock entries. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1 | Rowg3pnblockEntry | not-accessible | mandatory | A g3pnblock entry containing objects of the g3pnblock information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.1 | Columng3pnblockPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.2 | Columng3pnblockMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.3 | Columng3pnblockYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.4 | Columng3pnblockMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.5 | Columng3pnblockDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.6 | Columng3pnblockHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.7 | Columng3pnblockTdmUsage | read-only | mandatory | An object containing the total TDM time-slot usage. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.8 | Columng3pnblockTdmPeg | read-only | mandatory | An object containing the total count of circuit switch TDM time-slot seizure attempts for the PN. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.9 | Columng3pnblockTdmPeak | read-only | mandatory | An object containing the maximum number of time-slots allocated at any one time. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.10 | Columng3pnblockTdmBlockage | read-only | mandatory | An object containing the total count of TDM blockages, that is, the total number of times a TDM time-slot request is denied for the PN. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.11 | Columng3pnblockTimeSlots | read-only | mandatory | An object containing the number of PN link time-slots available between port networks or between Port Networks and Switch Nodes. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.12 | Columng3pnblockPNlinkUsage | read-only | mandatory | An object containing the total circuit switch usage of the available PN link(s) connecting the PN to the SN or to other PNs. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.13 | Columng3pnblockPNlinkPeg | read-only | mandatory | An object containing the total count of circuit switched time-slot seizure attempts for the link(s). |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.14 | Columng3pnblockPNlinkPeak | read-only | mandatory | An object containing the maximum number of time slots allocated at any one time on the PN links. |
| 1.3.6.1.4.1.6889.2.8.1.59.6.1.15 | Columng3pnblockPNlinkBlockage | read-only | mandatory | An object containing the total count of circuit switched PN blockages, that is, the number of times a PN link time-slot is denied. |
| 1.3.6.1.4.1.6889.2.8.1.60 | Nodeg3pkpnblock | |||
| 1.3.6.1.4.1.6889.2.8.1.60.1 | Scalarg3pkpnblockTage | read-only | mandatory | The number of timeticks since the port network blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3pnblockintvl o… |
| 1.3.6.1.4.1.6889.2.8.1.60.2 | Scalarg3pkpnblockTintvl | read-write | mandatory | An object containing the interval for which the port network blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-… |
| 1.3.6.1.4.1.6889.2.8.1.60.3 | Scalarg3pkpnblockTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.60.4 | Scalarg3pkpnblockTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.60.5 | Scalarg3pkpnblockTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.60.6 | Tableg3pkpnblockTable | not-accessible | mandatory | A list of g3pkpnblock entries. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1 | Rowg3pkpnblockEntry | not-accessible | mandatory | A g3pkpnblock entry containing objects of the g3pkpnblock information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.1 | Columng3pkpnblockPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.2 | Columng3pkpnblockMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.3 | Columng3pkpnblockYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.4 | Columng3pkpnblockMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.5 | Columng3pkpnblockDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.6 | Columng3pkpnblockHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.7 | Columng3pkpnblockTdmUsage | read-only | mandatory | An object containing the total TDM time-slot usage. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.8 | Columng3pkpnblockTdmPeg | read-only | mandatory | An object containing the total count of circuit switch TDM time-slot seizure attempts for the PN. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.9 | Columng3pkpnblockTdmPeak | read-only | mandatory | An object containing the maximum number of time-slots allocated at any one time. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.10 | Columng3pkpnblockTdmBlockage | read-only | mandatory | An object containing the total count of TDM blockages, that is, the total number of times a TDM time-slot request is denied for the PN. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.11 | Columng3pkpnblockTimeSlots | read-only | mandatory | An object containing the number of PN link time-slots available between port networks or between Port Networks and Switch Nodes. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.12 | Columng3pkpnblockPNlinkUsage | read-only | mandatory | An object containing the total circuit switch usage of the available PN link(s) connecting the PN to the SN or to other PNs. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.13 | Columng3pkpnblockPNlinkPeg | read-only | mandatory | An object containing the total count of circuit switched time-slot seizure attempts for the link(s). |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.14 | Columng3pkpnblockPNlinkPeak | read-only | mandatory | An object containing the maximum number of time slots allocated at any one time on the PN links. |
| 1.3.6.1.4.1.6889.2.8.1.60.6.1.15 | Columng3pkpnblockPNlinkBlockage | read-only | mandatory | An object containing the total count of circuit switched PN blockages, that is, the number of times a PN link time-slot is denied. |
| 1.3.6.1.4.1.6889.2.8.1.61 | Nodeg3snblock | |||
| 1.3.6.1.4.1.6889.2.8.1.61.1 | Scalarg3snblockTage | read-only | mandatory | The number of timeticks since the switch node blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3snblockintvl ob… |
| 1.3.6.1.4.1.6889.2.8.1.61.2 | Scalarg3snblockTintvl | read-write | mandatory | An object containing the interval for which the switch node blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-N… |
| 1.3.6.1.4.1.6889.2.8.1.61.3 | Scalarg3snblockTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.61.4 | Scalarg3snblockTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.61.5 | Scalarg3snblockTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.61.6 | Tableg3snblockTable | not-accessible | mandatory | A list of g3snblock entries. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1 | Rowg3snblockEntry | not-accessible | mandatory | A g3snblock entry containing objects of the g3snblock information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.1 | Columng3snblockSnPair | read-only | mandatory | An object containing the identifiers for the two SNs connected by the SN link being measured. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.2 | Columng3snblockMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.3 | Columng3snblockYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.4 | Columng3snblockMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.5 | Columng3snblockDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.6 | Columng3snblockHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.7 | Columng3snblockTimeSlots | read-only | mandatory | An object containing the number of SN link time-slots available between SNs. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.8 | Columng3snblockUsage | read-only | mandatory | An object containing the total circuit switch usage of the SN link connecting the two SNs. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.9 | Columng3snblockSnPeg | read-only | mandatory | An object containing the total count of circuit switched SN link time-slot seizure attempts between the two measured SNs. |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.10 | Columng3snblockLinkBlockage | read-only | mandatory | An object containing the total count of circuit switched SN link blockages, that is, the total number of times a call is blocked because no time-slots are avai… |
| 1.3.6.1.4.1.6889.2.8.1.61.6.1.11 | Columng3snblockOverflow | read-only | mandatory | An object containing the total number of times a call had to be routed over an alternate route. |
| 1.3.6.1.4.1.6889.2.8.1.62 | Nodeg3pksnblock | |||
| 1.3.6.1.4.1.6889.2.8.1.62.1 | Scalarg3pksnblockTage | read-only | mandatory | The number of timeticks since the switch node blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3snblockintvl ob… |
| 1.3.6.1.4.1.6889.2.8.1.62.2 | Scalarg3pksnblockTintvl | read-write | mandatory | An object containing the interval for which the switch node blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-N… |
| 1.3.6.1.4.1.6889.2.8.1.62.3 | Scalarg3pksnblockTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.62.4 | Scalarg3pksnblockTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.62.5 | Scalarg3pksnblockTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.62.6 | Tableg3pksnblockTable | not-accessible | mandatory | A list of g3pksnblock entries. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1 | Rowg3pksnblockEntry | not-accessible | mandatory | A g3pksnblock entry containing objects of the g3pksnblock information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.1 | Columng3pksnblockSnPair | read-only | mandatory | An object containing the identifiers for the two SNs connected by the SN link being measured. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.2 | Columng3pksnblockMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.3 | Columng3pksnblockYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.4 | Columng3pksnblockMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.5 | Columng3pksnblockDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.6 | Columng3pksnblockHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.7 | Columng3pksnblockTimeSlots | read-only | mandatory | An object containing the number of SN link time-slots available between SNs. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.8 | Columng3pksnblockUsage | read-only | mandatory | An object containing the total circuit switch usage of the SN link connecting the two SNs. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.9 | Columng3pksnblockSnPeg | read-only | mandatory | An object containing the total count of circuit switched SN link time-slot seizure attempts between the two measured SNs. |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.10 | Columng3pksnblockLinkBlockage | read-only | mandatory | An object containing the total count of circuit switched SN link blockages, that is, the total number of times a call is blocked because no time-slots are avai… |
| 1.3.6.1.4.1.6889.2.8.1.62.6.1.11 | Columng3pksnblockOverflow | read-only | mandatory | An object containing the total number of times a call had to be routed over an alternate route. |
| 1.3.6.1.4.1.6889.2.8.1.63 | Nodeg3hunt | |||
| 1.3.6.1.4.1.6889.2.8.1.63.1 | Scalarg3huntTage | read-only | mandatory | The number of timeticks since the hunt group data was last extracted from the switch by the Proxy Agent. This object along with the g3huntintvl object allows t… |
| 1.3.6.1.4.1.6889.2.8.1.63.2 | Scalarg3huntTintvl | read-write | mandatory | An object containing the interval for which the hunt group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT reques… |
| 1.3.6.1.4.1.6889.2.8.1.63.3 | Scalarg3huntTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.63.4 | Scalarg3huntTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.63.5 | Scalarg3huntTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.63.6 | Tableg3huntTable | not-accessible | mandatory | A list of g3hunt entries. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1 | Rowg3huntEntry | not-accessible | mandatory | A g3hunt entry containing objects of the g3hunt information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.1 | Columng3huntHuntGroup | read-only | mandatory | An object containing the hunt group number. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.2 | Columng3huntMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.3 | Columng3huntYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.4 | Columng3huntMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.5 | Columng3huntDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.6 | Columng3huntHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.7 | Columng3huntGroupSize | read-only | mandatory | An object containing the total number of members in the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.8 | Columng3huntTotalUsage | read-only | mandatory | An object containing the sum of all times that the members of the hunt group are busy on hunt group calls (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.9 | Columng3huntCallsAns | read-only | mandatory | An object containing the total number of calls that are answered by the hunt group. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.10 | Columng3huntCallsAban | read-only | mandatory | An object containing the total number of calls that attempt to reach the hunt group but abandon the attempt before being answered. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.11 | Columng3huntQueSiz | read-only | mandatory | An object containing the length of the queue assigned to the hunt group during administration. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.12 | Columng3huntCallsQue | read-only | mandatory | An object containing the total number of calls that arrive to find all members of the hunt group busy and are placed in the queue. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.13 | Columng3huntQueOvfl | read-only | mandatory | An object containing the number of calls that arrive when all slots in the hunt group queue are occupied. |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.14 | Columng3huntTimeAvail | read-only | mandatory | An object containing the total time that the hunt group extensions are not in use but are available to receive hunt group calls (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.63.6.1.15 | Columng3huntSpeedAns | read-only | mandatory | An object containing the average time interval from when the call first enters the hunt group or hunt group queue until the call is answered by a hunt group me… |
| 1.3.6.1.4.1.6889.2.8.1.64 | Nodeg3pkhunt | |||
| 1.3.6.1.4.1.6889.2.8.1.64.1 | Scalarg3pkhuntTage | read-only | mandatory | The number of timeticks since the peak hunt group data was last extracted from the switch by the Proxy Agent. This object along with the g3pkhuntintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.64.2 | Scalarg3pkhuntTintvl | read-write | mandatory | An object containing the interval for which the peak hunt group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.64.3 | Scalarg3pkhuntTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.64.4 | Scalarg3pkhuntTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.64.5 | Scalarg3pkhuntTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.64.6 | Tableg3pkhuntTable | not-accessible | mandatory | A list of g3pkhunt entries. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1 | Rowg3pkhuntEntry | not-accessible | mandatory | A g3pkhunt entry containing objects of the g3pkhunt information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.1 | Columng3pkhuntHuntGroup | read-only | mandatory | An object containing the hunt group number. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.2 | Columng3pkhuntMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.3 | Columng3pkhuntYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.4 | Columng3pkhuntMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.5 | Columng3pkhuntDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.6 | Columng3pkhuntHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.7 | Columng3pkhuntGroupSize | read-only | mandatory | An object containing the total number of members in the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.8 | Columng3pkhuntTotalUsage | read-only | mandatory | An object containing the sum of all times that the members of the hunt group are busy on hunt group calls (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.9 | Columng3pkhuntCallsAns | read-only | mandatory | An object containing the total number of calls that are answered by the hunt group. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.10 | Columng3pkhuntCallsAban | read-only | mandatory | An object containing the total number of calls that attempt to reach the hunt group but abandon the attempt before being answered. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.11 | Columng3pkhuntQueSiz | read-only | mandatory | An object containing the length of the queue assigned to the hunt group during administration. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.12 | Columng3pkhuntCallsQue | read-only | mandatory | An object containing the total number of calls that arrive to find all members of the hunt group busy and are placed in the queue. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.13 | Columng3pkhuntQueOvfl | read-only | mandatory | An object containing the number of calls that arrive when all slots in the hunt group queue are occupied. |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.14 | Columng3pkhuntTimeAvail | read-only | mandatory | An object containing the total time that the hunt group extensions are not in use but are available to receive hunt group calls (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.64.6.1.15 | Columng3pkhuntSpeedAns | read-only | mandatory | An object containing the average time interval from when the call first enters the hunt group or hunt group queue until the call is answered by a hunt group me… |
| 1.3.6.1.4.1.6889.2.8.1.65 | Nodeg3huntlist | |||
| 1.3.6.1.4.1.6889.2.8.1.65.1 | Scalarg3huntlistTage | read-only | mandatory | The number of timeticks since the hunt group list data was last extracted from the switch by the Proxy Agent. This object along with the g3huntlistintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.65.2 | Scalarg3huntlistTintvl | read-write | mandatory | An object containing the interval for which the hunt group list data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.65.3 | Scalarg3huntlistTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.65.4 | Scalarg3huntlistTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.65.5 | Scalarg3huntlistTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.65.6 | Tableg3huntlistTable | not-accessible | mandatory | A list of g3huntlist entries. |
| 1.3.6.1.4.1.6889.2.8.1.65.6.1 | Rowg3huntlistEntry | not-accessible | mandatory | A g3huntlist entry containing objects of the g3huntlist information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.65.6.1.1 | Columng3huntlistHGNumber | read-only | mandatory | An object containing the number of the hunt group. |
| 1.3.6.1.4.1.6889.2.8.1.65.6.1.2 | Columng3huntlistName | read-only | mandatory | A DisplayString Object containing the name of the hunt group. |
| 1.3.6.1.4.1.6889.2.8.1.65.6.1.3 | Columng3huntlistExtension | read-only | mandatory | An object containing the extension of the hunt group. |
| 1.3.6.1.4.1.6889.2.8.1.65.6.1.4 | Columng3huntlistType | read-only | mandatory | A DisplayString Object containing the type of hunt group. |
| 1.3.6.1.4.1.6889.2.8.1.66 | Nodeg3tonerec | |||
| 1.3.6.1.4.1.6889.2.8.1.66.1 | Scalarg3tonerecTage | read-only | mandatory | The number of timeticks since the tone receiver data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.66.2 | Scalarg3tonerecTintvl | read-write | mandatory | An object containing the interval for which the tone receiver data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.66.3 | Scalarg3tonerecTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.66.4 | Scalarg3tonerecTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.66.5 | Scalarg3tonerecTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.66.6 | Tableg3tonerecTable | not-accessible | mandatory | A list of g3tonerec entries. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1 | Rowg3tonerecEntry | not-accessible | mandatory | A g3tonerec entry containing objects of the g3tonerec information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.1 | Columng3tonerecPNNumber | read-only | mandatory | An object containing the Port Network number in which the tone receiver is located. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.2 | Columng3tonerecMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.3 | Columng3tonerecYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.4 | Columng3tonerecMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.5 | Columng3tonerecDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.6 | Columng3tonerecHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.7 | Columng3tonerecDTMFPnReq | read-only | mandatory | An object containing the number of DTMF requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.8 | Columng3tonerecDTMFPnAlloc | read-only | mandatory | An object containing the total number of DTMF receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.9 | Columng3tonerecDTMFPkAlloc | read-only | mandatory | An object containing the peak number of DTMF receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.10 | Columng3tonerecDTMFTotOffPN | read-only | mandatory | An object containing the total number of DTMF receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.11 | Columng3tonerecDTMFPkOffPN | read-only | mandatory | An object containing the peak number of DTMF receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.12 | Columng3tonerecGPTDPnReq | read-only | mandatory | An object containing the number of GPTD requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.13 | Columng3tonerecGPTDPnAlloc | read-only | mandatory | An object containing the total number of GPTD receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.14 | Columng3tonerecGPTDPkAlloc | read-only | mandatory | An object containing the peak number of GPTD receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.15 | Columng3tonerecGPTDTotOffPN | read-only | mandatory | An object containing the total number of GPTD receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.16 | Columng3tonerecGPTDPkOffPN | read-only | mandatory | An object containing the peak number of GPTD receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.17 | Columng3tonerecCCTTRPnReq | read-only | mandatory | An object containing the number of CC-TTR requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.18 | Columng3tonerecCCTTRPnAlloc | read-only | mandatory | An object containing the total number of CC-TTR receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.19 | Columng3tonerecCCTTRPkAlloc | read-only | mandatory | An object containing the peak number of CC-TTR receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.20 | Columng3tonerecCCTTRTotOffPN | read-only | mandatory | An object containing the total number of CC-TTR receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.21 | Columng3tonerecCCTTRPkOffPN | read-only | mandatory | An object containing the peak number of CC-TTR receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.22 | Columng3tonerecCCCPTRPnReq | read-only | mandatory | An object containing the number of CC-CPTR requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.23 | Columng3tonerecCCCPTRPnAlloc | read-only | mandatory | An object containing the total number of CC-CPTR receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.24 | Columng3tonerecCCCPTRPkAlloc | read-only | mandatory | An object containing the peak number of CC-CPTR receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.25 | Columng3tonerecCCCPTRTotOffPN | read-only | mandatory | An object containing the total number of CC-CPTR receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.26 | Columng3tonerecCCCPTRPkOffPN | read-only | mandatory | An object containing the peak number of CC-CPTR receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.27 | Columng3tonerecCCMFCRPnReq | read-only | mandatory | An object containing the number of CC-MFCR requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.28 | Columng3tonerecCCMFCRPnAlloc | read-only | mandatory | An object containing the total number of CC-MFCR receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.29 | Columng3tonerecCCMFCRPkAlloc | read-only | mandatory | An object containing the peak number of CC-MFCR receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.30 | Columng3tonerecCCMFCRTotOffPN | read-only | mandatory | An object containing the total number of CC-MFCR receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.66.6.1.31 | Columng3tonerecCCMFCRPkOffPN | read-only | mandatory | An object containing the peak number of CC-MFCR receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67 | Nodeg3pktonerec | |||
| 1.3.6.1.4.1.6889.2.8.1.67.1 | Scalarg3pktonerecTage | read-only | mandatory | The number of timeticks since the tone receiver data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.67.2 | Scalarg3pktonerecTintvl | read-write | mandatory | An object containing the interval for which the tone receiver data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.67.3 | Scalarg3pktonerecTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.67.4 | Scalarg3pktonerecTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.67.5 | Scalarg3pktonerecTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.67.6 | Tableg3pktonerecTable | not-accessible | mandatory | A list of g3pktonerec entries. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1 | Rowg3pktonerecEntry | not-accessible | mandatory | A g3pktonerec entry containing objects of the g3pktonerec information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.1 | Columng3pktonerecPNNumber | read-only | mandatory | An object containing the Port Network number in which the tone receiver is located. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.2 | Columng3pktonerecMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.3 | Columng3pktonerecYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.4 | Columng3pktonerecMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.5 | Columng3pktonerecDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.6 | Columng3pktonerecHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.7 | Columng3pktonerecDTMFPnReq | read-only | mandatory | An object containing the number of DTMF requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.8 | Columng3pktonerecDTMFPnAlloc | read-only | mandatory | An object containing the total number of DTMF receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.9 | Columng3pktonerecDTMFPkAlloc | read-only | mandatory | An object containing the peak number of DTMF receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.10 | Columng3pktonerecDTMFTotOffPN | read-only | mandatory | An object containing the total number of DTMF receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.11 | Columng3pktonerecDTMFPkOffPN | read-only | mandatory | An object containing the peak number of DTMF receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.12 | Columng3pktonerecGPTDPnReq | read-only | mandatory | An object containing the number of GPTD requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.13 | Columng3pktonerecGPTDPnAlloc | read-only | mandatory | An object containing the total number of GPTD receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.14 | Columng3pktonerecGPTDPkAlloc | read-only | mandatory | An object containing the peak number of GPTD receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.15 | Columng3pktonerecGPTDTotOffPN | read-only | mandatory | An object containing the total number of GPTD receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.16 | Columng3pktonerecGPTDPkOffPN | read-only | mandatory | An object containing the peak number of GPTD receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.17 | Columng3pktonerecCCTTRPnReq | read-only | mandatory | An object containing the number of CC-TTR requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.18 | Columng3pktonerecCCTTRPnAlloc | read-only | mandatory | An object containing the total number of CC-TTR receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.19 | Columng3pktonerecCCTTRPkAlloc | read-only | mandatory | An object containing the peak number of CC-TTR receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.20 | Columng3pktonerecCCTTRTotOffPN | read-only | mandatory | An object containing the total number of CC-TTR receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.21 | Columng3pktonerecCCTTRPkOffPN | read-only | mandatory | An object containing the peak number of CC-TTR receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.22 | Columng3pktonerecCCCPTRPnReq | read-only | mandatory | An object containing the number of CC-CPTR requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.23 | Columng3pktonerecCCCPTRPnAlloc | read-only | mandatory | An object containing the total number of CC-CPTR receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.24 | Columng3pktonerecCCCPTRPkAlloc | read-only | mandatory | An object containing the peak number of CC-CPTR receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.25 | Columng3pktonerecCCCPTRTotOffPN | read-only | mandatory | An object containing the total number of CC-CPTR receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.26 | Columng3pktonerecCCCPTRPkOffPN | read-only | mandatory | An object containing the peak number of CC-CPTR receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.27 | Columng3pktonerecCCMFCRPnReq | read-only | mandatory | An object containing the number of CC-MFCR requests within the PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.28 | Columng3pktonerecCCMFCRPnAlloc | read-only | mandatory | An object containing the total number of CC-MFCR receivers located in the listed PN that were allocated during the last hour. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.29 | Columng3pktonerecCCMFCRPkAlloc | read-only | mandatory | An object containing the peak number of CC-MFCR receivers located in the listed PN that were in use simulatneously. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.30 | Columng3pktonerecCCMFCRTotOffPN | read-only | mandatory | An object containing the total number of CC-MFCR receivers allocated of a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.67.6.1.31 | Columng3pktonerecCCMFCRPkOffPN | read-only | mandatory | An object containing the peak number of CC-MFCR receivers simultaneously allocated on a different PN for requests originated on this PN. |
| 1.3.6.1.4.1.6889.2.8.1.68 | Nodeg3tonerecsum | |||
| 1.3.6.1.4.1.6889.2.8.1.68.1 | Scalarg3tonerecsumTage | read-only | mandatory | The number of timeticks since the tone receiver summary data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecsumintv… |
| 1.3.6.1.4.1.6889.2.8.1.68.2 | Scalarg3tonerecsumTintvl | read-write | mandatory | An object containing the interval for which the tone receiver summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-… |
| 1.3.6.1.4.1.6889.2.8.1.68.3 | Scalarg3tonerecsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.68.4 | Scalarg3tonerecsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.68.5 | Scalarg3tonerecsumRunYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.68.6 | Scalarg3tonerecsumRunMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.68.7 | Scalarg3tonerecsumRunDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.68.8 | Scalarg3tonerecsumRunHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.68.9 | Scalarg3tonerecsumDTMFHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.68.10 | Scalarg3tonerecsumDTMFTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.68.11 | Scalarg3tonerecsumDTMFPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.68.12 | Scalarg3tonerecsumDTMFTQueue | read-only | mandatory | An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.68.13 | Scalarg3tonerecsumDTMFPQueue | read-only | mandatory | An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type. |
| 1.3.6.1.4.1.6889.2.8.1.68.14 | Scalarg3tonerecsumDTMFTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.68.15 | Scalarg3tonerecsumDTMFPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.68.16 | Scalarg3tonerecsumGPTDHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.68.17 | Scalarg3tonerecsumGPTDTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.68.18 | Scalarg3tonerecsumGPTDPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.68.19 | Scalarg3tonerecsumGPTDTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.68.20 | Scalarg3tonerecsumGPTDPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.68.21 | Scalarg3tonerecsumCCTTRHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.68.22 | Scalarg3tonerecsumCCTTRTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.68.23 | Scalarg3tonerecsumCCTTRPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.68.24 | Scalarg3tonerecsumCCTTRTQueue | read-only | mandatory | An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.68.25 | Scalarg3tonerecsumCCTTRPQueue | read-only | mandatory | An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type. |
| 1.3.6.1.4.1.6889.2.8.1.68.26 | Scalarg3tonerecsumCCTTRTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.68.27 | Scalarg3tonerecsumCCTTRPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.68.28 | Scalarg3tonerecsumCCCPTRHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.68.29 | Scalarg3tonerecsumCCCPTRTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.68.30 | Scalarg3tonerecsumCCCPTRPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.68.31 | Scalarg3tonerecsumCCCPTRTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.68.32 | Scalarg3tonerecsumCCCPTRPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.68.33 | Scalarg3tonerecsumCCMFCRHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.68.34 | Scalarg3tonerecsumCCMFCRTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.68.35 | Scalarg3tonerecsumCCMFCRPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.68.36 | Scalarg3tonerecsumCCMFCRTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.68.37 | Scalarg3tonerecsumCCMFCRPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.68.38 | Scalarg3tonerecsumDTMRTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.68.39 | Scalarg3tonerecsumGPRDTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.68.40 | Scalarg3tonerecsumCLASTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.68.41 | Scalarg3tonerecsumETRTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.69 | Nodeg3pktonerecsum | |||
| 1.3.6.1.4.1.6889.2.8.1.69.1 | Scalarg3pktonerecsumTage | read-only | mandatory | The number of timeticks since the tone receiver summary data was last extracted from the switch by the Proxy Agent. This object along with the g3pktonerecsumin… |
| 1.3.6.1.4.1.6889.2.8.1.69.2 | Scalarg3pktonerecsumTintvl | read-write | mandatory | An object containing the interval for which the tone receiver summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-… |
| 1.3.6.1.4.1.6889.2.8.1.69.3 | Scalarg3pktonerecsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.69.4 | Scalarg3pktonerecsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.69.5 | Scalarg3pktonerecsumRunYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.69.6 | Scalarg3pktonerecsumRunMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.69.7 | Scalarg3pktonerecsumRunDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.69.8 | Scalarg3pktonerecsumRunHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.69.9 | Scalarg3pktonerecsumDTMFHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.69.10 | Scalarg3pktonerecsumDTMFTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.69.11 | Scalarg3pktonerecsumDTMFPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.69.12 | Scalarg3pktonerecsumDTMFTQueue | read-only | mandatory | An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.69.13 | Scalarg3pktonerecsumDTMFPQueue | read-only | mandatory | An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type. |
| 1.3.6.1.4.1.6889.2.8.1.69.14 | Scalarg3pktonerecsumDTMFTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.69.15 | Scalarg3pktonerecsumDTMFPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were |
| 1.3.6.1.4.1.6889.2.8.1.69.16 | Scalarg3pktonerecsumGPTDHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.69.17 | Scalarg3pktonerecsumGPTDTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.69.18 | Scalarg3pktonerecsumGPTDPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.69.19 | Scalarg3pktonerecsumGPTDTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.69.20 | Scalarg3pktonerecsumGPTDPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.69.21 | Scalarg3pktonerecsumCCTTRHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.69.22 | Scalarg3pktonerecsumCCTTRTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.69.23 | Scalarg3pktonerecsumCCTTRPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.69.24 | Scalarg3pktonerecsumCCTTRTQueue | read-only | mandatory | An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.69.25 | Scalarg3pktonerecsumCCTTRPQueue | read-only | mandatory | An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type. |
| 1.3.6.1.4.1.6889.2.8.1.69.26 | Scalarg3pktonerecsumCCTTRTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.69.27 | Scalarg3pktonerecsumCCTTRPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.69.28 | Scalarg3pktonerecsumCCCPTRHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.69.29 | Scalarg3pktonerecsumCCCPTRTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.69.30 | Scalarg3pktonerecsumCCCPTRPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.69.31 | Scalarg3pktonerecsumCCCPTRTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.69.32 | Scalarg3pktonerecsumCCCPTRPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.69.33 | Scalarg3pktonerecsumCCMFCRHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.69.34 | Scalarg3pktonerecsumCCMFCRTReq | read-only | mandatory | An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.69.35 | Scalarg3pktonerecsumCCMFCRPReq | read-only | mandatory | An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement in… |
| 1.3.6.1.4.1.6889.2.8.1.69.36 | Scalarg3pktonerecsumCCMFCRTDeny | read-only | mandatory | An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour. |
| 1.3.6.1.4.1.6889.2.8.1.69.37 | Scalarg3pktonerecsumCCMFCRPDeny | read-only | mandatory | An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measu… |
| 1.3.6.1.4.1.6889.2.8.1.69.38 | Scalarg3pktonerecsumDTMRTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.69.39 | Scalarg3pktonerecsumGPRDTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.69.40 | Scalarg3pktonerecsumCLASTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.69.41 | Scalarg3pktonerecsumETRTAvail | read-only | mandatory | An object containing the number of ports available for the type of tone receiver. |
| 1.3.6.1.4.1.6889.2.8.1.70 | Nodeg3rpatcfg | |||
| 1.3.6.1.4.1.6889.2.8.1.70.1 | Scalarg3rpatcfgTage | read-only | mandatory | The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatcfgintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.70.2 | Scalarg3rpatcfgTintvl | read-write | mandatory | An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.70.3 | Scalarg3rpatcfgTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.70.4 | Scalarg3rpatcfgTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.70.5 | Scalarg3rpatcfgTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.70.6 | Scalarg3rpatcfgPattern1 | read-only | mandatory | An object containing the measurement 1 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.7 | Scalarg3rpatcfgPattern2 | read-only | mandatory | An object containing the measurement 2 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.8 | Scalarg3rpatcfgPattern3 | read-only | mandatory | An object containing the measurement 3 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.9 | Scalarg3rpatcfgPattern4 | read-only | mandatory | An object containing the measurement 4 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.10 | Scalarg3rpatcfgPattern5 | read-only | mandatory | An object containing the measurement 5 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.11 | Scalarg3rpatcfgPattern6 | read-only | mandatory | An object containing the measurement 6 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.12 | Scalarg3rpatcfgPattern7 | read-only | mandatory | An object containing the measurement 7 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.13 | Scalarg3rpatcfgPattern8 | read-only | mandatory | An object containing the measurement 8 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.14 | Scalarg3rpatcfgPattern9 | read-only | mandatory | An object containing the measurement 9 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.15 | Scalarg3rpatcfgPattern10 | read-only | mandatory | An object containing the measurement 10 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.16 | Scalarg3rpatcfgPattern11 | read-only | mandatory | An object containing the measurement 11 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.17 | Scalarg3rpatcfgPattern12 | read-only | mandatory | An object containing the measurement 12 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.18 | Scalarg3rpatcfgPattern13 | read-only | mandatory | An object containing the measurement 13 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.19 | Scalarg3rpatcfgPattern14 | read-only | mandatory | An object containing the measurement 14 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.20 | Scalarg3rpatcfgPattern15 | read-only | mandatory | An object containing the measurement 15 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.21 | Scalarg3rpatcfgPattern16 | read-only | mandatory | An object containing the measurement 16 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.22 | Scalarg3rpatcfgPattern17 | read-only | mandatory | An object containing the measurement 17 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.23 | Scalarg3rpatcfgPattern18 | read-only | mandatory | An object containing the measurement 18 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.24 | Scalarg3rpatcfgPattern19 | read-only | mandatory | An object containing the measurement 19 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.25 | Scalarg3rpatcfgPattern20 | read-only | mandatory | An object containing the measurement 20 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.26 | Scalarg3rpatcfgPattern21 | read-only | mandatory | An object containing the measurement 21 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.27 | Scalarg3rpatcfgPattern22 | read-only | mandatory | An object containing the measurement 22 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.28 | Scalarg3rpatcfgPattern23 | read-only | mandatory | An object containing the measurement 23 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.29 | Scalarg3rpatcfgPattern24 | read-only | mandatory | An object containing the measurement 24 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.70.30 | Scalarg3rpatcfgPattern25 | read-only | mandatory | An object containing the measurement 25 route pattern |
| 1.3.6.1.4.1.6889.2.8.1.71 | Nodeg3rpat | |||
| 1.3.6.1.4.1.6889.2.8.1.71.1 | Scalarg3rpatTage | read-only | mandatory | The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatintvl object allow… |
| 1.3.6.1.4.1.6889.2.8.1.71.2 | Scalarg3rpatTintvl | read-write | mandatory | An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.71.3 | Scalarg3rpatTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.71.4 | Scalarg3rpatTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.71.5 | Scalarg3rpatTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.71.6 | Tableg3rpatTable | not-accessible | mandatory | A list of g3rpat entries. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1 | Rowg3rpatEntry | not-accessible | mandatory | A g3rpat entry containing objects of the g3rpat information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.1 | Columng3rpatPattern | read-only | mandatory | An object containing the number of route pattern being measured. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.2 | Columng3rpatTrunkGroup | read-only | mandatory | An object containing the first trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.3 | Columng3rpatYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.4 | Columng3rpatMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.5 | Columng3rpatDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.6 | Columng3rpatHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.7 | Columng3rpatQueueSize | read-only | mandatory | An object containing the length of the queue for the first trunk group in the route pattern. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.8 | Columng3rpatCallsOffered | read-only | mandatory | An object containing the total number of calls offered to the route pattern. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.9 | Columng3rpatCallsCarried | read-only | mandatory | An object containing the total number of seizures for all trunk groups in the routing pattern. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.10 | Columng3rpatCallsBlocked | read-only | mandatory | An object containing the number of outgoing calls that found all trunk groups in the pattern busy. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.11 | Columng3rpatCallsQueued | read-only | mandatory | An object containing the number of offered calls that found all trunk groups in the pattern busy and were placed in queue for the first trunk group in the patt… |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.12 | Columng3rpatQueueOvflo | read-only | mandatory | An object containing the number of calls that find the queue on the first trunk group full. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.13 | Columng3rpatCallsCarrd | read-only | mandatory | An object containing the percentage of total calls carried over the route pattern by the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.14 | Columng3rpatTotalCalls | read-only | mandatory | An object containing the total number of calls carried by the route pattern over the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.71.6.1.15 | Columng3rpatIndex | read-only | mandatory | An object containing an index for a route pattern/trunk group number combination to make a record unique. |
| 1.3.6.1.4.1.6889.2.8.1.72 | Nodeg3pkrpat | |||
| 1.3.6.1.4.1.6889.2.8.1.72.1 | Scalarg3pkrpatTage | read-only | mandatory | The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatintvl object allow… |
| 1.3.6.1.4.1.6889.2.8.1.72.2 | Scalarg3pkrpatTintvl | read-write | mandatory | An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.72.3 | Scalarg3pkrpatTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.72.4 | Scalarg3pkrpatTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.72.5 | Scalarg3pkrpatTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.72.6 | Tableg3pkrpatTable | not-accessible | mandatory | A list of g3pkrpat entries. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1 | Rowg3pkrpatEntry | not-accessible | mandatory | A g3pkrpat entry containing objects of the g3pkrpat information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.1 | Columng3pkrpatPattern | read-only | mandatory | An object containing the number of route pattern being measured. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.2 | Columng3pkrpatTrunkGroup | read-only | mandatory | An object containing the first trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.3 | Columng3pkrpatYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.4 | Columng3pkrpatMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.5 | Columng3pkrpatDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.6 | Columng3pkrpatHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.7 | Columng3pkrpatQueueSize | read-only | mandatory | An object containing the length of the queue for the first trunk group in the route pattern. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.8 | Columng3pkrpatCallsOffered | read-only | mandatory | An object containing the total number of calls offered to the route pattern. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.9 | Columng3pkrpatCallsCarried | read-only | mandatory | An object containing the total number of seizures for all trunk groups in the routing pattern. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.10 | Columng3pkrpatCallsBlocked | read-only | mandatory | An object containing the number of outgoing calls that found all trunk groups in the pattern busy. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.11 | Columng3pkrpatCallsQueued | read-only | mandatory | An object containing the number of offered calls that found all trunk groups in the pattern busy and were placed in queue for the first trunk group in the patt… |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.12 | Columng3pkrpatQueueOvflo | read-only | mandatory | An object containing the number of calls that find the queue on the first trunk group full. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.13 | Columng3pkrpatCallsCarrd | read-only | mandatory | An object containing the percentage of total calls carried over the route pattern by the trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.14 | Columng3pkrpatTotalCalls | read-only | mandatory | An object containing the total number of calls carried by the route |
| 1.3.6.1.4.1.6889.2.8.1.72.6.1.15 | Columng3pkrpatIndex | read-only | mandatory | An object containing an index for a route pattern/trunk group number combination to make a record unique. |
| 1.3.6.1.4.1.6889.2.8.1.73 | Nodeg3secviolate | |||
| 1.3.6.1.4.1.6889.2.8.1.73.1 | Scalarg3secviolateTage | read-only | mandatory | The number of timeticks since the security violations data was last extracted from the switch by the Proxy Agent. This object along with the g3secviolateintvl … |
| 1.3.6.1.4.1.6889.2.8.1.73.2 | Scalarg3secviolateTintvl | read-write | mandatory | An object containing the interval for which the security violations data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NE… |
| 1.3.6.1.4.1.6889.2.8.1.73.3 | Scalarg3secviolateTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.73.4 | Scalarg3secviolateTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.73.5 | Scalarg3secviolateTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.73.6 | Tableg3secviolateTable | not-accessible | mandatory | A list of g3secviolate entries. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1 | Rowg3secviolateEntry | not-accessible | mandatory | A g3secviolate entry containing objects of the g3secviolate information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.1 | Columng3secviolatePortType | read-only | mandatory | An object containing the type of port to which the login was attempted. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.2 | Columng3secviolateYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.3 | Columng3secviolateMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.4 | Columng3secviolateDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.5 | Columng3secviolateHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.6 | Columng3secviolateCountSince | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.7 | Columng3secviolateValidBC | read-only | mandatory | An object containing the total number of times a user entered a valid barrier code. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.8 | Columng3secviolateInvalidBC | read-only | mandatory | An object containing the total number of times a user entered a invalid barrier code. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.9 | Columng3secviolateViolateBC | read-only | mandatory | An object containing the total number of security violations for barrier codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.10 | Columng3secviolateStnValidSSC | read-only | mandatory | An object containing the number of calls originating from stations that generated valid station security codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.11 | Columng3secviolateStnInvalidSSC | read-only | mandatory | An object containing the number of calls originating from stations that generated invalid station security codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.12 | Columng3secviolateTrkValidSSC | read-only | mandatory | An object containing the number of calls originating from trunks that generated valid station security codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.13 | Columng3secviolateTrkInvalidSSC | read-only | mandatory | An object containing the number of calls originating from trunks that generated invalid station security codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.14 | Columng3secviolateTtlValidSSC | read-only | mandatory | An object containing the number of total calls that generated valid station security codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.15 | Columng3secviolateTtlInvalidSSC | read-only | mandatory | An object containing the number of total calls that generated invalid station security codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.16 | Columng3secviolateTtlViolateSSC | read-only | mandatory | An object containing the number of total calls that generated station security violations. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.17 | Columng3secviolateStnValidAC | read-only | mandatory | An object containing the number of calls originating from stations that generated valid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.18 | Columng3secviolateStnInvalidAC | read-only | mandatory | An object containing the number of calls originating from stations that generated invalid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.19 | Columng3secviolateStnViolateAC | read-only | mandatory | An object containing the number of calls originating from stations that generated security violations for authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.20 | Columng3secviolateTrkValidAC | read-only | mandatory | An object containing the number of calls originating from trunks that generated valid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.21 | Columng3secviolateTrkInvalidAC | read-only | mandatory | An object containing the number of calls originating from trunks that generated invalid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.22 | Columng3secviolateTrkViolateAC | read-only | mandatory | An object containing the number of calls originating from trunks that generated security violations for authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.23 | Columng3secviolateRAValidAC | read-only | mandatory | An object containing the number of calls originating from remote access that generated valid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.24 | Columng3secviolateRAInvalidAC | read-only | mandatory | An object containing the number of calls originating from remote access that generated invalid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.25 | Columng3secviolateRAViolateAC | read-only | mandatory | An object containing the number of calls originating from remote access that generated security violations for authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.26 | Columng3secviolateAtdValidAC | read-only | mandatory | An object containing the number of calls originating from attendants that generated valid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.27 | Columng3secviolateAtdInvalidAC | read-only | mandatory | An object containing the number of calls originating from attendants that generated invalid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.28 | Columng3secviolateAtdViolateAC | read-only | mandatory | An object containing the number of calls originating from attendants that generated security violations for authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.29 | Columng3secviolateTtlValidAC | read-only | mandatory | An object containing the number of total calls that generated valid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.30 | Columng3secviolateTtlInvalidAC | read-only | mandatory | An object containing the number of total calls that generated invalid authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.31 | Columng3secviolateTtlViolateAC | read-only | mandatory | An object containing the number of total calls that generated security violations for authorization codes. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.32 | Columng3secviolateLoginSuccess | read-only | mandatory | An object containing the total number of successful logins into the given port type. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.33 | Columng3secviolateInvalidAttempt | read-only | mandatory | An object containing the total number of login attempts where the login ID or password were invalid. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.34 | Columng3secviolateInvalidID | read-only | mandatory | An object containing the total number of login attempts where the login ID was invalid. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.35 | Columng3secviolateForceDsc | read-only | mandatory | An object containing the total number of login processes that were disconnected automatically by the switch because the threshold for consecutive invalid login… |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.36 | Columng3secviolateSecViolate | read-only | mandatory | An object containing the total number of login security violations. |
| 1.3.6.1.4.1.6889.2.8.1.73.6.1.37 | Columng3secviolateTrivialAttempt | read-only | mandatory | An object containing the total number of times a user connected to the system and gave no input to the login sequence. |
| 1.3.6.1.4.1.6889.2.8.1.74 | Nodeg3cbctrunk | |||
| 1.3.6.1.4.1.6889.2.8.1.74.1 | Scalarg3cbctrunkTage | read-only | mandatory | The number of timeticks since the cbc trunk group data was last extracted from the switch by the Proxy Agent. This object along with the g3cbctrunkintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.74.2 | Scalarg3cbctrunkTintvl | read-write | mandatory | An object containing the interval for which the cbc trunk group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.74.3 | Scalarg3cbctrunkTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.74.4 | Scalarg3cbctrunkTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.74.5 | Scalarg3cbctrunkTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.74.6 | Tableg3cbctrunkTable | not-accessible | mandatory | A list of g3cbctrunk entries. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1 | Rowg3cbctrunkEntry | not-accessible | mandatory | A g3cbctrunk entry containing objects of the g3cbctrunk information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.1 | Columng3cbctrunkTGNumber | read-only | mandatory | An object containing the trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.2 | Columng3cbctrunkServiceName | read-only | mandatory | An object containing the name of the services or features for which the associated measurements are being reported. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.3 | Columng3cbctrunkYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.4 | Columng3cbctrunkMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.5 | Columng3cbctrunkDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.6 | Columng3cbctrunkHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.7 | Columng3cbctrunkQueueSize | read-only | mandatory | An object containing the size of the trunk group queue. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.8 | Columng3cbctrunkCallsQueued | read-only | mandatory | An object containing the total number of calls that entered the queue. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.9 | Columng3cbctrunkQueueOvflw | read-only | mandatory | An object containing the total number of calls that were denied access to the trunk, found the queue full, and received reorder tone. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.10 | Columng3cbctrunkQueueAband | read-only | mandatory | An object containing the total number of calls that were removed from the queue by the system or the user. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.11 | Columng3cbctrunkTrunksOOS | read-only | mandatory | An object containing the total number of trunks in the group that were out-of-service when measurements were collected. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.12 | Columng3cbctrunkPlan1 | read-only | mandatory | An object containing the first usage allocation plan number (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.13 | Columng3cbctrunkPlan2 | read-only | mandatory | An object containing the second usage allocation plan number (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.14 | Columng3cbctrunkPlan3 | read-only | mandatory | An object containing the third usage allocation plan number (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.15 | Columng3cbctrunkPlan4 | read-only | mandatory | An object containing the fourth usage allocation plan number (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.16 | Columng3cbctrunkPlan5 | read-only | mandatory | An object containing the fifth usage allocation plan number (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.17 | Columng3cbctrunkPlan6 | read-only | mandatory | An object containing the sixth usage allocation plan number (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.18 | Columng3cbctrunkDur1 | read-only | mandatory | An object containing the first usage allocation plan duration (in minutes) that the first plan was in effect (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.19 | Columng3cbctrunkDur2 | read-only | mandatory | An object containing the second usage allocation plan duration (in minutes) that the second plan was in effect (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.20 | Columng3cbctrunkDur3 | read-only | mandatory | An object containing the third usage allocation plan duration (in minutes) that the third plan was in effect (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.21 | Columng3cbctrunkDur4 | read-only | mandatory | An object containing the fourth usage allocation plan duration (in minutes) that the fourth plan was in effect (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.22 | Columng3cbctrunkDur5 | read-only | mandatory | An object containing the fifth usage allocation plan duration (in minutes) that the fifth plan was in effect (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.23 | Columng3cbctrunkDur6 | read-only | mandatory | An object containing the sixth usage allocation plan duration (in minutes) that the sixth plan was in effect (if any). |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.24 | Columng3cbctrunkMinChan | read-only | mandatory | An object containing the minimum number of channels in the ISDN-PRI CBC trunk group allocated to the specified service/feature. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.25 | Columng3cbctrunkMaxChan | read-only | mandatory | An object containing the maximum number of channels in the ISDN-PRI CBC trunk group allocated to the specified service/feature. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.26 | Columng3cbctrunkMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.27 | Columng3cbctrunkTotUsage | read-only | mandatory | An object containing the sum of time (CCS) for all channels used by the specified service/feature. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.28 | Columng3cbctrunkTotSeize | read-only | mandatory | An object containing the total number of incoming and outgoing calls that requested the specified service/feature. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.29 | Columng3cbctrunkIncSeize | read-only | mandatory | An object containing the total number of incoming calls that requested the specified service/feature. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.30 | Columng3cbctrunkTanSeize | read-only | mandatory | An object containing the total number of trunk-to-trunk call seizures using the specified service/feature. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.31 | Columng3cbctrunkOvfTG | read-only | mandatory | An object containing the number of outgoing calls that requested the specified service/feature, but were not carried because the calls arrived to find no idle … |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.32 | Columng3cbctrunkOvfSF | read-only | mandatory | An object containing the number of calls that requested the specified service/feature but were denied. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.33 | Columng3cbctrunkOvfMAX | read-only | mandatory | An object containing the number of calls that were not carried because they originated at a time when the specified service/feature had already used up its all… |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.34 | Columng3cbctrunkTBM | read-only | mandatory | An object containing the percentage of time during the polling interval that the number of channels in use by the specified service/feature is below the specif… |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.35 | Columng3cbctrunkATB | read-only | mandatory | An object containing the percentage of time during the measurement interval that the specified service/feature could not get a channel. |
| 1.3.6.1.4.1.6889.2.8.1.74.6.1.36 | Columng3cbctrunkOutBlk | read-only | mandatory | An object containing the ratio of outgoing calls not carried for a specified service/feature to the outgoing calls offered by the service/feature. |
| 1.3.6.1.4.1.6889.2.8.1.75 | Nodeg3deftime | |||
| 1.3.6.1.4.1.6889.2.8.1.75.1 | Scalarg3deftimeTage | read-only | mandatory | The number of timeticks since the definity time data was last extracted from the switch by the Proxy Agent. This object along with the g3deftimeintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.75.2 | Scalarg3deftimeTintvl | read-write | mandatory | An object containing the interval for which the definity time data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.75.3 | Scalarg3deftimeTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.75.4 | Scalarg3deftimeTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.75.5 | Scalarg3deftimeDayOfMonth | read-only | mandatory | An INTEGER object containing the current system time Day of the Month (1-31). |
| 1.3.6.1.4.1.6889.2.8.1.75.6 | Scalarg3deftimeMonth | read-only | mandatory | A DisplayString Object that contains the name of the Month ('January', 'February', 'March', 'April', 'May', 'June', 'July', 'August', 'September', 'October', '… |
| 1.3.6.1.4.1.6889.2.8.1.75.7 | Scalarg3deftimeYear | read-only | mandatory | An INTEGER object containing the current system time Year (0000-9999). |
| 1.3.6.1.4.1.6889.2.8.1.75.8 | Scalarg3deftimeDayOfWeek | read-only | mandatory | A DisplayString Object that contains the day of the week ('Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', or 'Sunday'). |
| 1.3.6.1.4.1.6889.2.8.1.75.9 | Scalarg3deftimeHour | read-only | mandatory | An INTEGER object containing the current system time Hour (0-23). |
| 1.3.6.1.4.1.6889.2.8.1.75.10 | Scalarg3deftimeMinute | read-only | mandatory | An INTEGER object containing the current system time Minute (0-59). |
| 1.3.6.1.4.1.6889.2.8.1.75.11 | Scalarg3deftimeSecond | read-only | mandatory | An INTEGER object containing the current system time Second (0-59). |
| 1.3.6.1.4.1.6889.2.8.1.76 | Nodeg3trunkout | |||
| 1.3.6.1.4.1.6889.2.8.1.76.1 | Scalarg3trunkoutTage | read-only | mandatory | The number of timeticks since the trunk outage data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkoutintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.76.2 | Scalarg3trunkoutTintvl | read-write | mandatory | An object containing the interval for which the trunk outage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.76.3 | Scalarg3trunkoutTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.76.4 | Scalarg3trunkoutTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.76.5 | Scalarg3trunkoutTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.76.6 | Tableg3trunkoutTable | not-accessible | mandatory | A list of g3trunkout entries. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1 | Rowg3trunkoutEntry | not-accessible | mandatory | A g3trunkout entry containing objects of the g3trunkout information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1.1 | Columng3trunkoutTrunkGroup | read-only | mandatory | An object containing the trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1.2 | Columng3trunkoutMember | read-only | mandatory | An object containing the group member number. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1.3 | Columng3trunkoutYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1.4 | Columng3trunkoutMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1.5 | Columng3trunkoutDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1.6 | Columng3trunkoutHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.76.6.1.7 | Columng3trunkoutOutages | read-only | mandatory | An object containing the number of times the group member is sampled as out of service over the measurement period. |
| 1.3.6.1.4.1.6889.2.8.1.77 | Nodeg3trunklight | |||
| 1.3.6.1.4.1.6889.2.8.1.77.1 | Scalarg3trunklightTage | read-only | mandatory | The number of timeticks since the lightly used trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3trunklightintvl o… |
| 1.3.6.1.4.1.6889.2.8.1.77.2 | Scalarg3trunklightTintvl | read-write | mandatory | An object containing the interval for which the lightly used trunk data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEX… |
| 1.3.6.1.4.1.6889.2.8.1.77.3 | Scalarg3trunklightTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.77.4 | Scalarg3trunklightTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.77.5 | Scalarg3trunklightTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.77.6 | Tableg3trunklightTable | not-accessible | mandatory | A list of g3trunklight entries. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1 | Rowg3trunklightEntry | not-accessible | mandatory | A g3trunklight entry containing objects of the g3trunklight information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1.1 | Columng3trunklightTrunkGroup | read-only | mandatory | An object containing the trunk group number. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1.2 | Columng3trunklightMember | read-only | mandatory | An object containing the group member number. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1.3 | Columng3trunklightYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1.4 | Columng3trunklightMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1.5 | Columng3trunklightDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1.6 | Columng3trunklightHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.77.6.1.7 | Columng3trunklightCarried | read-only | mandatory | An object containing the number of calls carried on the trunk member over the measurement interval. |
| 1.3.6.1.4.1.6889.2.8.1.78 | Nodeg3loadtotal | |||
| 1.3.6.1.4.1.6889.2.8.1.78.1 | Scalarg3loadtotalTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadtotalintvl object allows the Net… |
| 1.3.6.1.4.1.6889.2.8.1.78.2 | Scalarg3loadtotalTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.78.3 | Scalarg3loadtotalTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.78.4 | Scalarg3loadtotalTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.78.5 | Scalarg3loadtotalTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.78.6 | Tableg3loadtotalTable | not-accessible | mandatory | A list of g3loadtotal entries. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1 | Rowg3loadtotalEntry | not-accessible | mandatory | A g3loadtotal entry containing objects of the g3loadtotal information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.1 | Columng3loadtotalPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.2 | Columng3loadtotalYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.3 | Columng3loadtotalMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.4 | Columng3loadtotalDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.5 | Columng3loadtotalHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.6 | Columng3loadtotalPNOccupancy | read-only | mandatory | An object containing the percentage of port network link occupancy. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.7 | Columng3loadtotalPNUtil | read-only | mandatory | An object containing the percentage of the total capacity of the processor on the measured EI board. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.8 | Columng3loadtotalTDMOccupancy | read-only | mandatory | An object containing the percentage of time division muliplexed occupancy. |
| 1.3.6.1.4.1.6889.2.8.1.78.6.1.9 | Columng3loadtotalMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.79 | Nodeg3loadint | |||
| 1.3.6.1.4.1.6889.2.8.1.79.1 | Scalarg3loadintTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadintintvl object allows the Netwo… |
| 1.3.6.1.4.1.6889.2.8.1.79.2 | Scalarg3loadintTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.79.3 | Scalarg3loadintTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.79.4 | Scalarg3loadintTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.79.5 | Scalarg3loadintTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.79.6 | Tableg3loadintTable | not-accessible | mandatory | A list of g3loadint entries. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1 | Rowg3loadintEntry | not-accessible | mandatory | A g3loadint entry containing objects of the g3loadint information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.1 | Columng3loadintPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.2 | Columng3loadintYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.3 | Columng3loadintMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.4 | Columng3loadintDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.5 | Columng3loadintHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.6 | Columng3loadintIntIntraPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by station-to-station calls between terminals on the same port network (displayed in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.7 | Columng3loadintIntIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by station-to-station calls between terminals on the same PN. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.8 | Columng3loadintIntInterPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by station-to-station calls between terminals on different port networks (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.9 | Columng3loadintIntInterPNPeg | read-only | mandatory | An object containing the TDM time slot seizures caused by station-to-station calls between terminals on different PNs. |
| 1.3.6.1.4.1.6889.2.8.1.79.6.1.10 | Columng3loadintMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.80 | Nodeg3loadinc | |||
| 1.3.6.1.4.1.6889.2.8.1.80.1 | Scalarg3loadincTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadincintvl object allows the Netwo… |
| 1.3.6.1.4.1.6889.2.8.1.80.2 | Scalarg3loadincTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.80.3 | Scalarg3loadincTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.80.4 | Scalarg3loadincTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.80.5 | Scalarg3loadincTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.80.6 | Tableg3loadincTable | not-accessible | mandatory | A list of g3loadinc entries. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1 | Rowg3loadincEntry | not-accessible | mandatory | A g3loadinc entry containing objects of the g3loadinc information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.1 | Columng3loadincPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.2 | Columng3loadincYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.3 | Columng3loadincMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.4 | Columng3loadincDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.5 | Columng3loadincHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.6 | Columng3loadincIncIntraPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by incoming trunk calls to a station on the same port network (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.7 | Columng3loadincIncIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by incoming trunk calls to a station on the same port network. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.8 | Columng3loadincIncIncomingUse | read-only | mandatory | An object containing the TDM time-slot usage caused by calls to a station on the port network from an incoming trunk on another port network (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.9 | Columng3loadincIncIncomingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by calls to a station on the port network from an incoming trunk on another port network. |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.10 | Columng3loadincIncOutgoingUse | read-only | mandatory | An object containing the TDM time-slot usage caused by calls to a station on another port network from an incoming trunk on the measured port network (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.11 | Columng3loadincIncOutgoingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by calls to a station on another port network from an incoming trunk on the measured port netwo… |
| 1.3.6.1.4.1.6889.2.8.1.80.6.1.12 | Columng3loadincMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.81 | Nodeg3loadout | |||
| 1.3.6.1.4.1.6889.2.8.1.81.1 | Scalarg3loadoutTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadoutintvl object allows the Netwo… |
| 1.3.6.1.4.1.6889.2.8.1.81.2 | Scalarg3loadoutTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.81.3 | Scalarg3loadoutTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.81.4 | Scalarg3loadoutTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.81.5 | Scalarg3loadoutTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.81.6 | Tableg3loadoutTable | not-accessible | mandatory | A list of g3loadout entries. |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1 | Rowg3loadoutEntry | not-accessible | mandatory | A g3loadout entry containing objects of the g3loadout information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.1 | Columng3loadoutPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.2 | Columng3loadoutYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.3 | Columng3loadoutMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.4 | Columng3loadoutDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.5 | Columng3loadoutHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.6 | Columng3loadoutOutIntraPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same… |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.7 | Columng3loadoutOutIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks… |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.8 | Columng3loadoutOutIncomingUse | read-only | mandatory | An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on another port network but serviced by trunks on the port ne… |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.9 | Columng3loadoutOutIncomingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on another port network, but serviced by trunks o… |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.10 | Columng3loadoutOutOutgoingUse | read-only | mandatory | An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on… |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.11 | Columng3loadoutOutOutgoingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on the port network being measured, but serviced … |
| 1.3.6.1.4.1.6889.2.8.1.81.6.1.12 | Columng3loadoutMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.82 | Nodeg3loadtan | |||
| 1.3.6.1.4.1.6889.2.8.1.82.1 | Scalarg3loadtanTage | read-only | mandatory | The number of timeticks since the tandem load data was last extracted from the switch by the Proxy Agent. This object along with the g3loadtanintvl object allo… |
| 1.3.6.1.4.1.6889.2.8.1.82.2 | Scalarg3loadtanTintvl | read-write | mandatory | An object containing the interval for which the tandem load data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT reque… |
| 1.3.6.1.4.1.6889.2.8.1.82.3 | Scalarg3loadtanTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.82.4 | Scalarg3loadtanTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.82.5 | Scalarg3loadtanTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.82.6 | Tableg3loadtanTable | not-accessible | mandatory | A list of g3loadtan entries. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1 | Rowg3loadtanEntry | not-accessible | mandatory | A g3loadtan entry containing objects of the g3loadtan information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.1 | Columng3loadtanPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.2 | Columng3loadtanYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.3 | Columng3loadtanMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.4 | Columng3loadtanDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.5 | Columng3loadtanHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.6 | Columng3loadtanTanIntraPNUse | read-only | mandatory | An object containing the TDM usage caused by tandem trunk calls originating and terminating on the port network being measured (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.7 | Columng3loadtanTanIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by tandem trunk calls originating and terminating on the port network being measured. |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.8 | Columng3loadtanTanIncomingUse | read-only | mandatory | An object containing the TDM usage resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured (i… |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.9 | Columng3loadtanTanIncomingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on another port network, but terminating on the port net… |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.10 | Columng3loadtanTanOutgoingUse | read-only | mandatory | An object containing the TDM usage resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network (i… |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.11 | Columng3loadtanTanOutgoingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on the port network being measured, but terminating on a… |
| 1.3.6.1.4.1.6889.2.8.1.82.6.1.12 | Columng3loadtanMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.83 | Nodeg3pkloadtotal | |||
| 1.3.6.1.4.1.6889.2.8.1.83.1 | Scalarg3pkloadtotalTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadtotalintvl object allows the N… |
| 1.3.6.1.4.1.6889.2.8.1.83.2 | Scalarg3pkloadtotalTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.83.3 | Scalarg3pkloadtotalTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.83.4 | Scalarg3pkloadtotalTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.83.5 | Scalarg3pkloadtotalTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.83.6 | Tableg3pkloadtotalTable | not-accessible | mandatory | A list of g3pkloadtotal entries. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1 | Rowg3pkloadtotalEntry | not-accessible | mandatory | A g3pkloadtotal entry containing objects of the g3pkloadtotal information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.1 | Columng3pkloadtotalPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.2 | Columng3pkloadtotalYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.3 | Columng3pkloadtotalMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.4 | Columng3pkloadtotalDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.5 | Columng3pkloadtotalHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.6 | Columng3pkloadtotalPNOccupancy | read-only | mandatory | An object containing the percentage of port network link occupancy. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.7 | Columng3pkloadtotalPNUtil | read-only | mandatory | An object containing the percentage of the total capacity of the processor on the measured EI board (this field no longer is no longer populated). |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.8 | Columng3pkloadtotalTDMOccupancy | read-only | mandatory | An object containing the percentage of time division muliplexed occupancy. |
| 1.3.6.1.4.1.6889.2.8.1.83.6.1.9 | Columng3pkloadtotalMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.84 | Nodeg3pkloadint | |||
| 1.3.6.1.4.1.6889.2.8.1.84.1 | Scalarg3pkloadintTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadintintvl object allows the Net… |
| 1.3.6.1.4.1.6889.2.8.1.84.2 | Scalarg3pkloadintTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.84.3 | Scalarg3pkloadintTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.84.4 | Scalarg3pkloadintTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.84.5 | Scalarg3pkloadintTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.84.6 | Tableg3pkloadintTable | not-accessible | mandatory | A list of g3pkloadint entries. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1 | Rowg3pkloadintEntry | not-accessible | mandatory | A g3pkloadint entry containing objects of the g3pkloadint information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.1 | Columng3pkloadintPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.2 | Columng3pkloadintYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.3 | Columng3pkloadintMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.4 | Columng3pkloadintDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.5 | Columng3pkloadintHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.6 | Columng3pkloadintIntIntraPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by station-to-station calls between terminals on the same port network (displayed in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.7 | Columng3pkloadintIntIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by station-to-station calls between terminals on the same PN. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.8 | Columng3pkloadintIntInterPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by station-to-station calls between terminals on different port networks (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.9 | Columng3pkloadintIntInterPNPeg | read-only | mandatory | An object containing the TDM time slot seizures caused by station-to-station calls between terminals on different PNs. |
| 1.3.6.1.4.1.6889.2.8.1.84.6.1.10 | Columng3pkloadintMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.85 | Nodeg3pkloadinc | |||
| 1.3.6.1.4.1.6889.2.8.1.85.1 | Scalarg3pkloadincTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadincintvl object allows the Net… |
| 1.3.6.1.4.1.6889.2.8.1.85.2 | Scalarg3pkloadincTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.85.3 | Scalarg3pkloadincTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.85.4 | Scalarg3pkloadincTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.85.5 | Scalarg3pkloadincTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.85.6 | Tableg3pkloadincTable | not-accessible | mandatory | A list of g3pkloadinc entries. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1 | Rowg3pkloadincEntry | not-accessible | mandatory | A g3pkloadinc entry containing objects of the g3pkloadinc information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.1 | Columng3pkloadincPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.2 | Columng3pkloadincYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.3 | Columng3pkloadincMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.4 | Columng3pkloadincDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.5 | Columng3pkloadincHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.6 | Columng3pkloadincIncIntraPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by incoming trunk calls to a station on the same port network (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.7 | Columng3pkloadincIncIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by incoming trunk calls to a station on the same port network. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.8 | Columng3pkloadincIncIncomingUse | read-only | mandatory | An object containing the TDM time-slot usage caused by calls to a station on the port network from an incoming trunk on another port network (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.9 | Columng3pkloadincIncIncomingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by calls to a station on the port network from an incoming trunk on another port network. |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.10 | Columng3pkloadincIncOutgoingUse | read-only | mandatory | An object containing the TDM time-slot usage caused by calls to a station on another port network from an incoming trunk on the measured port network (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.11 | Columng3pkloadincIncOutgoingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by calls to a station on another port network from an incoming trunk on the measured port netwo… |
| 1.3.6.1.4.1.6889.2.8.1.85.6.1.12 | Columng3pkloadincMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.86 | Nodeg3pkloadout | |||
| 1.3.6.1.4.1.6889.2.8.1.86.1 | Scalarg3pkloadoutTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadoutintvl object allows the Net… |
| 1.3.6.1.4.1.6889.2.8.1.86.2 | Scalarg3pkloadoutTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.86.3 | Scalarg3pkloadoutTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.86.4 | Scalarg3pkloadoutTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.86.5 | Scalarg3pkloadoutTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.86.6 | Tableg3pkloadoutTable | not-accessible | mandatory | A list of g3pkloadout entries. |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1 | Rowg3pkloadoutEntry | not-accessible | mandatory | A g3pkloadout entry containing objects of the g3pkloadout information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.1 | Columng3pkloadoutPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.2 | Columng3pkloadoutYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.3 | Columng3pkloadoutMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.4 | Columng3pkloadoutDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.5 | Columng3pkloadoutHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.6 | Columng3pkloadoutOutIntraPNUse | read-only | mandatory | An object containing the TDM time-slot usage caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same… |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.7 | Columng3pkloadoutOutIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks… |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.8 | Columng3pkloadoutOutIncomingUse | read-only | mandatory | An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on another port network but serviced by trunks on the port ne… |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.9 | Columng3pkloadoutOutIncomingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on another port network, but serviced by trunks o… |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.10 | Columng3pkloadoutOutOutgoingUse | read-only | mandatory | An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on… |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.11 | Columng3pkloadoutOutOutgoingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on the port network being measured, but serviced … |
| 1.3.6.1.4.1.6889.2.8.1.86.6.1.12 | Columng3pkloadoutMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.87 | Nodeg3pkloadtan | |||
| 1.3.6.1.4.1.6889.2.8.1.87.1 | Scalarg3pkloadtanTage | read-only | mandatory | The number of timeticks since the peak tandem load data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadtanintvl obje… |
| 1.3.6.1.4.1.6889.2.8.1.87.2 | Scalarg3pkloadtanTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the p… |
| 1.3.6.1.4.1.6889.2.8.1.87.3 | Scalarg3pkloadtanTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.87.4 | Scalarg3pkloadtanTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.87.5 | Scalarg3pkloadtanTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.87.6 | Tableg3pkloadtanTable | not-accessible | mandatory | A list of g3pkloadtan entries. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1 | Rowg3pkloadtanEntry | not-accessible | mandatory | A g3pkloadtan entry containing objects of the g3pkloadtan information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.1 | Columng3pkloadtanPNNumber | read-only | mandatory | An object containing the Port Network number. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.2 | Columng3pkloadtanYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.3 | Columng3pkloadtanMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.4 | Columng3pkloadtanDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.5 | Columng3pkloadtanHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.6 | Columng3pkloadtanTanIntraPNUse | read-only | mandatory | An object containing the TDM usage caused by tandem trunk calls originating and terminating on the port network being measured (in CCS). |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.7 | Columng3pkloadtanTanIntraPNPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures caused by tandem trunk calls originating and terminating on the port network being measured. |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.8 | Columng3pkloadtanTanIncomingUse | read-only | mandatory | An object containing the TDM usage resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured (i… |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.9 | Columng3pkloadtanTanIncomingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on another port network, but terminating on the port net… |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.10 | Columng3pkloadtanTanOutgoingUse | read-only | mandatory | An object containing the TDM usage resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network (i… |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.11 | Columng3pkloadtanTanOutgoingPeg | read-only | mandatory | An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on the port network being measured, but terminating on a… |
| 1.3.6.1.4.1.6889.2.8.1.87.6.1.12 | Columng3pkloadtanMeasHour | read-only | mandatory | An object containing the hour the measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.88 | Nodeg3atmlatency | |||
| 1.3.6.1.4.1.6889.2.8.1.88.1 | Scalarg3atmlatencyTage | read-only | mandatory | The number of timeticks since the atm pnc latency data was last extracted from the switch by the Proxy Agent. This object along with the g3atmlatencyintvl obje… |
| 1.3.6.1.4.1.6889.2.8.1.88.2 | Scalarg3atmlatencyTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the a… |
| 1.3.6.1.4.1.6889.2.8.1.88.3 | Scalarg3atmlatencyTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.88.4 | Scalarg3atmlatencyTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.88.5 | Scalarg3atmlatencyTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.88.6 | Tableg3atmlatencyTable | not-accessible | mandatory | A list of g3atmlatency entries. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1 | Rowg3atmlatencyEntry | not-accessible | mandatory | A g3atmlatency entry containing objects of the g3atmlatency information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.1 | Columng3atmlatencyPNPair | read-only | mandatory | An INTEGER object containing an index numbering the PN Pair. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.2 | Columng3atmlatencyYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.3 | Columng3atmlatencyMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.4 | Columng3atmlatencyDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.5 | Columng3atmlatencyHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.6 | Columng3atmlatencyPNOrig1 | read-only | mandatory | Originating Port Network for the PN Pair. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.7 | Columng3atmlatencyPNDest1 | read-only | mandatory | Originating Port Network for the PN Pair. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.8 | Columng3atmlatencyCount1A | read-only | mandatory | An object containing the number (count) of connections for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.9 | Columng3atmlatencySetup1A | read-only | mandatory | An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.10 | Columng3atmlatencyATMCount1A | read-only | mandatory | An object containing the number (count) of ATM network connections for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.11 | Columng3atmlatencyATMSetup1A | read-only | mandatory | An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.12 | Columng3atmlatencyMeasHour1A | read-only | mandatory | An object containing the Hour the PN Pair A-PNC measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.13 | Columng3atmlatencyCount1B | read-only | mandatory | An object containing the number (count) of connections for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.14 | Columng3atmlatencySetup1B | read-only | mandatory | An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.15 | Columng3atmlatencyATMCount1B | read-only | mandatory | An object containing the number (count) of ATM network connections for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.16 | Columng3atmlatencyATMSetup1B | read-only | mandatory | An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.88.6.1.17 | Columng3atmlatencyMeasHour1B | read-only | mandatory | An object containing the Hour the PN Pair B-PNC measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.89 | Nodeg3pkatmlatency | |||
| 1.3.6.1.4.1.6889.2.8.1.89.1 | Scalarg3pkatmlatencyTage | read-only | mandatory | The number of timeticks since the peak atm latency data was last extracted from the switch by the Proxy Agent. This object along with the g3pkatmlatencyintvl o… |
| 1.3.6.1.4.1.6889.2.8.1.89.2 | Scalarg3pkatmlatencyTintvl | read-write | mandatory | An object containing the interval for which the peak atm latency data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT … |
| 1.3.6.1.4.1.6889.2.8.1.89.3 | Scalarg3pkatmlatencyTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.89.4 | Scalarg3pkatmlatencyTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.89.5 | Scalarg3pkatmlatencyTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.89.6 | Tableg3pkatmlatencyTable | not-accessible | mandatory | A list of g3pkatmlatency entries. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1 | Rowg3pkatmlatencyEntry | not-accessible | mandatory | A g3pkatmlatency entry containing objects of the g3pkatmlatency information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.1 | Columng3pkatmlatencyPNPair | read-only | mandatory | An INTEGER object containing an index numbering the PN Pair. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.2 | Columng3pkatmlatencyYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.3 | Columng3pkatmlatencyMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.4 | Columng3pkatmlatencyDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.5 | Columng3pkatmlatencyHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.6 | Columng3pkatmlatencyPNOrig1 | read-only | mandatory | Originating Port Network for the PN Pair. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.7 | Columng3pkatmlatencyPNDest1 | read-only | mandatory | Originating Port Network for the PN Pair. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.8 | Columng3pkatmlatencyCount1A | read-only | mandatory | An object containing the number (count) of connections for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.9 | Columng3pkatmlatencySetup1A | read-only | mandatory | An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.10 | Columng3pkatmlatencyATMCount1A | read-only | mandatory | An object containing the number (count) of ATM network connections for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.11 | Columng3pkatmlatencyATMSetup1A | read-only | mandatory | An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on A-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.12 | Columng3pkatmlatencyMeasHour1A | read-only | mandatory | An object containing the Hour the PN Pair A-PNC measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.13 | Columng3pkatmlatencyCount1B | read-only | mandatory | An object containing the number (count) of connections for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.14 | Columng3pkatmlatencySetup1B | read-only | mandatory | An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.15 | Columng3pkatmlatencyATMCount1B | read-only | mandatory | An object containing the number (count) of ATM network connections for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.16 | Columng3pkatmlatencyATMSetup1B | read-only | mandatory | An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on B-PNC. |
| 1.3.6.1.4.1.6889.2.8.1.89.6.1.17 | Columng3pkatmlatencyMeasHour1B | read-only | mandatory | An object containing the Hour the PN Pair B-PNC measurement was taken. |
| 1.3.6.1.4.1.6889.2.8.1.90 | Nodeg3ipcodecsum | |||
| 1.3.6.1.4.1.6889.2.8.1.90.1 | Scalarg3ipcodecsumTage | read-only | mandatory | The number of timeticks since the ip codec summary data was last extracted from the switch by the Proxy Agent. This object along with the g3ipcodecsumintvl obj… |
| 1.3.6.1.4.1.6889.2.8.1.90.2 | Scalarg3ipcodecsumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the i… |
| 1.3.6.1.4.1.6889.2.8.1.90.3 | Scalarg3ipcodecsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.90.4 | Scalarg3ipcodecsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.90.5 | Scalarg3ipcodecsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.90.6 | Tableg3ipcodecsumTable | not-accessible | mandatory | A list of g3ipcodecsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1 | Rowg3ipcodecsumEntry | not-accessible | mandatory | A g3ipcodecsum entry containing objects of the g3ipcodecsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.1 | Columng3ipcodecsumRegion | read-only | mandatory | An object containing The network region that the IP Media Processors and Medpros for this measurement are in. Range: 1-44. |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.2 | Columng3ipcodecsumMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.3 | Columng3ipcodecsumYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.4 | Columng3ipcodecsumMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.5 | Columng3ipcodecsumDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.6 | Columng3ipcodecsumHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.7 | Columng3ipcodecsumDSPRecs | read-only | mandatory | An object containing the total IP codec resources (voice channels) in the region. |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.8 | Columng3ipcodecsumG711Usage | read-only | mandatory | An object containing the usage in Erlangs of G.711 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be … |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.9 | Columng3ipcodecsumG711InRegion | read-only | mandatory | An object containing the total number of times an IP media processor port in the region was allocated to a G.711 call. Range: 0-65535. |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.10 | Columng3ipcodecsumG711OutRegion | read-only | mandatory | An object containing the total number of times an IP media processor port was needed in the region for a G.711 call, but was successfully allocated to a resour… |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.11 | Columng3ipcodecsumG723Usage | read-only | mandatory | An object containing the usage in Erlangs of G.723 or G.729 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage … |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.12 | Columng3ipcodecsumG723InRegion | read-only | mandatory | An object containing the total number of times an IP media processor port in the region was allocated to a G.723 or G.729 call. Range: 0-65535. |
| 1.3.6.1.4.1.6889.2.8.1.90.6.1.13 | Columng3ipcodecsumG723OutRegion | read-only | mandatory | An object containing the total number of times an IP media processor port was needed in the region for a G.723 or G.729 call, but was successfully allocated to… |
| 1.3.6.1.4.1.6889.2.8.1.91 | Nodeg3pkipcodecsum | |||
| 1.3.6.1.4.1.6889.2.8.1.91.1 | Scalarg3pkipcodecsumTage | read-only | mandatory | The number of timeticks since the peak ip codec summary data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipcodecsumin… |
| 1.3.6.1.4.1.6889.2.8.1.91.2 | Scalarg3pkipcodecsumTintvl | read-write | mandatory | An object containing the interval for which the peak ip codec summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-… |
| 1.3.6.1.4.1.6889.2.8.1.91.3 | Scalarg3pkipcodecsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.91.4 | Scalarg3pkipcodecsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.91.5 | Scalarg3pkipcodecsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.91.6 | Tableg3pkipcodecsumTable | not-accessible | mandatory | A list of g3pkipcodecsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1 | Rowg3pkipcodecsumEntry | not-accessible | mandatory | A g3pkipcodecsum entry containing objects of the g3pkipcodecsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.1 | Columng3pkipcodecsumRegion | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.2 | Columng3pkipcodecsumMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.3 | Columng3pkipcodecsumYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.4 | Columng3pkipcodecsumMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.5 | Columng3pkipcodecsumDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.6 | Columng3pkipcodecsumHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.7 | Columng3pkipcodecsumDSPRecs | read-only | mandatory | An object containing the total IP codec resources (voice channels) in the region |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.8 | Columng3pkipcodecsumG711Usage | read-only | mandatory | An object containing the usage in Erlangs of G.711 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be … |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.9 | Columng3pkipcodecsumG711InRegion | read-only | mandatory | An object containing the total number of times an IP media processor port in the region was allocated to a G.711 call. Range: 0-65535. |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.10 | Columng3pkipcodecsumG711OutRegion | read-only | mandatory | An object containing the total number of times an IP media processor port was needed in the region for a G.711 call, but was successfully allocated to a resour… |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.11 | Columng3pkipcodecsumG723Usage | read-only | mandatory | An object containing the usage in Erlangs of G.723 or G.729 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage … |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.12 | Columng3pkipcodecsumG723InRegion | read-only | mandatory | An object containing the total number of times an IP media processor port in the region was allocated to a G.723 or G.729 call. Range: 0-65535. |
| 1.3.6.1.4.1.6889.2.8.1.91.6.1.13 | Columng3pkipcodecsumG723OutRegion | read-only | mandatory | An object containing the total number of times an IP media processor port was needed in the region for a G.723 or G.729 call, but was successfully allocated to… |
| 1.3.6.1.4.1.6889.2.8.1.92 | Nodeg3ipregion | |||
| 1.3.6.1.4.1.6889.2.8.1.92.1 | Scalarg3ipregionTage | read-only | mandatory | The number of timeticks since the ip network region data was last extracted from the switch by the Proxy Agent. This object along with the g3ipregionintvl obje… |
| 1.3.6.1.4.1.6889.2.8.1.92.2 | Scalarg3ipregionTintvl | read-write | mandatory | An object containing the interval for which the ip network region data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT… |
| 1.3.6.1.4.1.6889.2.8.1.92.3 | Scalarg3ipregionTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.92.4 | Scalarg3ipregionTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.92.5 | Scalarg3ipregionTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.92.6 | Tableg3ipregionTable | not-accessible | mandatory | A list of g3ipregion entries. |
| 1.3.6.1.4.1.6889.2.8.1.92.6.1 | Rowg3ipregionEntry | not-accessible | mandatory | A g3ipregion entry containing objects of the g3ipregion information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.92.6.1.1 | Columng3ipregionRegion | read-only | mandatory | An object containing the network region of the IP media processors being region number is assigned on the Ip-interfaces screen during switch administration. Ra… |
| 1.3.6.1.4.1.6889.2.8.1.92.6.1.2 | Columng3ipregionName | read-only | mandatory | An object containing the name of the ip-network region |
| 1.3.6.1.4.1.6889.2.8.1.93 | Nodeg3ipdspsum | |||
| 1.3.6.1.4.1.6889.2.8.1.93.1 | Scalarg3ipdspsumTage | read-only | mandatory | The number of timeticks since the ip dsp resource data was last extracted from the switch by the Proxy Agent. This object along with the g3ipdspsumintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.93.2 | Scalarg3ipdspsumTintvl | read-write | mandatory | An object containing the interval for which the ip dsp resource data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.93.3 | Scalarg3ipdspsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.93.4 | Scalarg3ipdspsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.93.5 | Scalarg3ipdspsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.93.6 | Tableg3ipdspsumTable | not-accessible | mandatory | A list of g3ipdspsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1 | Rowg3ipdspsumEntry | not-accessible | mandatory | A g3ipdspsum entry containing objects of the g3ipdspsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.1 | Columng3ipdspsumRegion | read-only | mandatory | An object containing the network region of the IP media processors being measured. The region number is assigned on the Ip-interfaces screen during switch admi… |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.2 | Columng3ipdspsumMeasHour | read-only | mandatory | An object containing the hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.3 | Columng3ipdspsumYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.4 | Columng3ipdspsumMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.5 | Columng3ipdspsumDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.6 | Columng3ipdspsumHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.7 | Columng3ipdspsumDSPRecs | read-only | mandatory | An object containing the total number of IP codec resources, or voice channels, in the region. Range:0-9999 |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.8 | Columng3ipdspsumDSPUsage | read-only | mandatory | An object containing the amount of time (in erlangs) that all codecs were in use during the measurement period. The time is measured from the time the voice ch… |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.9 | Columng3ipdspsumInRegion | read-only | mandatory | An object containing the total number of times an IP media processor port in the region was allocated to a call. Range:0-65535 |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.10 | Columng3ipdspsumOutRegion | read-only | mandatory | An object containing the total number of times an IP media processor port was needed in the region for a call, but was successfully allocated to a resource in … |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.11 | Columng3ipdspsumDenied | read-only | mandatory | An object containing the total number of times an IP media processor port was needed in the region for a call, but all media ports in all regions were busy and… |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.12 | Columng3ipdspsumPctBlk | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.93.6.1.13 | Columng3ipdspsumPctOutSrv | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.94 | Nodeg3pkipdspsum | |||
| 1.3.6.1.4.1.6889.2.8.1.94.1 | Scalarg3pkipdspsumTage | read-only | mandatory | The number of timeticks since the peak ip dsp resource data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipdspsumintvl… |
| 1.3.6.1.4.1.6889.2.8.1.94.2 | Scalarg3pkipdspsumTintvl | read-write | mandatory | An object containing the interval for which the peak ip dsp resource data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-N… |
| 1.3.6.1.4.1.6889.2.8.1.94.3 | Scalarg3pkipdspsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.94.4 | Scalarg3pkipdspsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.94.5 | Scalarg3pkipdspsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.94.6 | Tableg3pkipdspsumTable | not-accessible | mandatory | A list of g3pkipdspsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1 | Rowg3pkipdspsumEntry | not-accessible | mandatory | A g3pkipdspsum entry containing objects of the g3pkipdspsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.1 | Columng3pkipdspsumRegion | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.2 | Columng3pkipdspsumMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.3 | Columng3pkipdspsumYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.4 | Columng3pkipdspsumMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.5 | Columng3pkipdspsumDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.6 | Columng3pkipdspsumHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.7 | Columng3pkipdspsumDSPRecs | read-only | mandatory | An object containing total number of IP codec resources, or voice channels, in the region. Range:0-9999 |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.8 | Columng3pkipdspsumDSPUsage | read-only | mandatory | An object containing amount of time (in erlangs) that all codecs were in use during the measurement period. The time is measured from the time the voice channe… |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.9 | Columng3pkipdspsumInRegion | read-only | mandatory | An object containing the total number of times an IP media processor port in the region was allocated to a call.Range:0-65535 |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.10 | Columng3pkipdspsumOutRegion | read-only | mandatory | An object containing the total number of times an IP media processor port was needed in the region for a call, but was successfully allocated to a resource in … |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.11 | Columng3pkipdspsumDenied | read-only | mandatory | An object containing The total number of times an IP media processor port was needed in the region for a call, but all media ports in all regions were busy and… |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.12 | Columng3pkipdspsumPctBlk | read-only | mandatory | An object containing the percent of attempted use of IP media processor ports in the region that were not successful (blocked). This percent includes calls tha… |
| 1.3.6.1.4.1.6889.2.8.1.94.6.1.13 | Columng3pkipdspsumPctOutSrv | read-only | mandatory | An object containing the percent of CCS time that any IP media processor ports were out of service during the measurement period. This percent includes ports t… |
| 1.3.6.1.4.1.6889.2.8.1.95 | Nodeg3ipsignal | |||
| 1.3.6.1.4.1.6889.2.8.1.95.1 | Scalarg3ipsignalTage | read-only | mandatory | The number of timeticks since the ip signaling group data was last extracted from the switch by the Proxy Agent. This object along with the g3ipsignalintvl obj… |
| 1.3.6.1.4.1.6889.2.8.1.95.2 | Scalarg3ipsignalTintvl | read-write | mandatory | An object containing the interval for which the ip signaling group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEX… |
| 1.3.6.1.4.1.6889.2.8.1.95.3 | Scalarg3ipsignalTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.95.4 | Scalarg3ipsignalTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.95.5 | Scalarg3ipsignalTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.95.6 | Tableg3ipsignalTable | not-accessible | mandatory | A list of g3ipsignal entries. |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1 | Rowg3ipsignalEntry | not-accessible | mandatory | A g3ipsignal entry containing objects of the g3ipsignal information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.1 | Columng3ipsignalSigGroup | read-only | mandatory | An object containing the ip signaling group number |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.2 | Columng3ipsignalRegion | read-only | mandatory | An object containing the network region of the ip signaling group |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.3 | Columng3ipsignalYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.4 | Columng3ipsignalMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.5 | Columng3ipsignalDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.6 | Columng3ipsignalHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.7 | Columng3ipsignalHourAvgLatency | read-only | mandatory | An object containing the average latency for the whole hour |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.8 | Columng3ipsignalHourPacketsSent | read-only | mandatory | An object containing the number of packets sent during the whole hour |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.9 | Columng3ipsignalHourPktsLostPct | read-only | mandatory | An object containing the percent lost packets for the whole hour |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.10 | Columng3ipsignalMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.11 | Columng3ipsignalWorstInterval | read-only | mandatory | An object containing the hour and worst 3 minute interval within the hour. |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.12 | Columng3ipsignalIntvlAvgLatency | read-only | mandatory | An object containing the average latency for the interval. |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.13 | Columng3ipsignalIntvlPacketsSent | read-only | mandatory | An object containing the number of packets sent during the interval. |
| 1.3.6.1.4.1.6889.2.8.1.95.6.1.14 | Columng3ipsignalIntvlPktsLostPct | read-only | mandatory | An object containing the percent of packets lost for the interval |
| 1.3.6.1.4.1.6889.2.8.1.96 | Nodeg3pkipsignal | |||
| 1.3.6.1.4.1.6889.2.8.1.96.1 | Scalarg3pkipsignalTage | read-only | mandatory | The number of timeticks since the peak ip signaling group data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipsignalin… |
| 1.3.6.1.4.1.6889.2.8.1.96.2 | Scalarg3pkipsignalTintvl | read-write | mandatory | An object containing the interval for which the peak ip signaling group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GE… |
| 1.3.6.1.4.1.6889.2.8.1.96.3 | Scalarg3pkipsignalTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.96.4 | Scalarg3pkipsignalTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.96.5 | Scalarg3pkipsignalTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.96.6 | Tableg3pkipsignalTable | not-accessible | mandatory | A list of g3pkipsignal entries. |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1 | Rowg3pkipsignalEntry | not-accessible | mandatory | A g3pkipsignal entry containing objects of the g3pkipsignal information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.1 | Columng3pkipsignalSigGroup | read-only | mandatory | An object containing the ip signaling group number |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.2 | Columng3pkipsignalRegion | read-only | mandatory | An object containing the network region of the ip signaling group |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.3 | Columng3pkipsignalYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.4 | Columng3pkipsignalMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.5 | Columng3pkipsignalDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.6 | Columng3pkipsignalHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.7 | Columng3pkipsignalHourAvgLatency | read-only | mandatory | An object containing the average latency for the whole hour |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.8 | Columng3pkipsignalHourPacketsSent | read-only | mandatory | An object containing the number of packets sent during the whole hour |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.9 | Columng3pkipsignalHourPktsLostPct | read-only | mandatory | An object containing the percent of packets lost for the whole hour |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.10 | Columng3pkipsignalMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.11 | Columng3pkipsignalWorstInterval | read-only | mandatory | An object containing the hour and worst 3 minute interval within the hour |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.12 | Columng3pkipsignalIntvlAvgLatency | read-only | mandatory | An object containing the average latency for the interval |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.13 | Columng3pkipsignalIntvlPacketsSent | read-only | mandatory | An object containing the number of packets sent during the interval |
| 1.3.6.1.4.1.6889.2.8.1.96.6.1.14 | Columng3pkipsignalIntvlPktsLostPct | read-only | mandatory | An object containing the percent of packets lost for the interval |
| 1.3.6.1.4.1.6889.2.8.1.97 | Nodeg3annall | |||
| 1.3.6.1.4.1.6889.2.8.1.97.1 | Scalarg3annallTage | read-only | mandatory | The number of timeticks since the announcement data was last extracted from the switch by the Proxy Agent. This object along with the g3annallintvl object allo… |
| 1.3.6.1.4.1.6889.2.8.1.97.2 | Scalarg3annallTintvl | read-write | mandatory | An object containing the interval for which the announcement data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.97.3 | Scalarg3annallTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.97.4 | Scalarg3annallTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.97.5 | Scalarg3annallTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.97.6 | Tableg3annallTable | not-accessible | mandatory | A list of g3annall entries. |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1 | Rowg3annallEntry | not-accessible | mandatory | A g3annall entry containing objects of the g3annall information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.1 | Columng3annallAnnNbr | read-only | mandatory | An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3annallExtension field instead since the annou… |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.2 | Columng3annallYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.3 | Columng3annallMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.4 | Columng3annallDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.5 | Columng3annallHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.6 | Columng3annallExtension | read-only | mandatory | An object containing the extension number for the announcement |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.7 | Columng3annallName | read-only | mandatory | An object containing the first 24 characters of the announcement |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.8 | Columng3annallMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.9 | Columng3annallPlayRequests | read-only | mandatory | An object containing total number of calls that requested a play of this announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.10 | Columng3annallCallsQueued | read-only | mandatory | An object containing the number of calls for an announcement that had to queue waiting for a port during the period |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.11 | Columng3annallASP | read-only | mandatory | An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the wai… |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.12 | Columng3annallQueueDrops | read-only | mandatory | An object containing - count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the calle… |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.13 | Columng3annallMPortPlay | read-only | mandatory | An object containing - count of how many times the announcement is being played out of more than one port at the same time during the period |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.14 | Columng3annallMaxPorts | read-only | mandatory | An object containing the peak number of ports used for the announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.97.6.1.15 | Columng3annallMaxCallers | read-only | mandatory | An object containing the peak number callers connected to a port at the same time for this announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.98 | Nodeg3pkannall | |||
| 1.3.6.1.4.1.6889.2.8.1.98.1 | Scalarg3pkannallTage | read-only | mandatory | The number of timeticks since the announcement data was last extracted from the switch by the Proxy Agent. This object along with the g3pkannallintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.98.2 | Scalarg3pkannallTintvl | read-write | mandatory | An object containing the interval for which the Announcement data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.98.3 | Scalarg3pkannallTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.98.4 | Scalarg3pkannallTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.98.5 | Scalarg3pkannallTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.98.6 | Tableg3pkannallTable | not-accessible | mandatory | A list of g3pkannall entries. |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1 | Rowg3pkannallEntry | not-accessible | mandatory | A g3pkannall entry containing objects of the g3pkannall information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.1 | Columng3pkannallAnnNbr | read-only | mandatory | An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3pkannallExtension field instead since the ann… |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.2 | Columng3pkannallYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.3 | Columng3pkannallMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.4 | Columng3pkannallDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.5 | Columng3pkannallHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.6 | Columng3pkannallExtension | read-only | mandatory | An object containing the extension number for the announcement |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.7 | Columng3pkannallName | read-only | mandatory | An object containing the first 24 characters of the announcement |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.8 | Columng3pkannallMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.9 | Columng3pkannallPlayRequests | read-only | mandatory | An object containing total number of calls that requested a play of this announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.10 | Columng3pkannallCallsQueued | read-only | mandatory | An object containing number of calls for an announcement that had to queue waiting for a port during the period |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.11 | Columng3pkannallASP | read-only | mandatory | An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the wai… |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.12 | Columng3pkannallQueueDrops | read-only | mandatory | An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller … |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.13 | Columng3pkannallMPortPlay | read-only | mandatory | An object containing count of how many times the announcement is being played out of more than one port at the same time during the period |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.14 | Columng3pkannallMaxPorts | read-only | mandatory | An object containing the peak number of ports used for the announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.98.6.1.15 | Columng3pkannallMaxCall | read-only | mandatory | An object containing the peak number callers connected to a port at the same time for this announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.99 | Nodeg3anninteg | |||
| 1.3.6.1.4.1.6889.2.8.1.99.1 | Scalarg3annintegTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3annintegintvl object allows the Netw… |
| 1.3.6.1.4.1.6889.2.8.1.99.2 | Scalarg3annintegTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.99.3 | Scalarg3annintegTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.99.4 | Scalarg3annintegTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.99.5 | Scalarg3annintegTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.99.6 | Tableg3annintegTable | not-accessible | mandatory | A list of g3anninteg entries. |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1 | Rowg3annintegEntry | not-accessible | mandatory | A g3anninteg entry containing objects of the g3anninteg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.1 | Columng3annintegBoard | read-only | mandatory | An object containing the board number for the integrated announcement board |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.2 | Columng3annintegYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.3 | Columng3annintegMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.4 | Columng3annintegDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.5 | Columng3annintegHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.6 | Columng3annintegPlayPorts | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.7 | Columng3annintegMaxCallPeriod | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.8 | Columng3annintegAllPortsBusy | read-only | mandatory | An object containing an indication of how frequently the all-ports-busy condition occurs within the period of time |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.9 | Columng3annintegAnnNbr | read-only | mandatory | An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3annintegExtension field instead since the ann… |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.10 | Columng3annintegExtension | read-only | mandatory | An object containing the extension number for the announcement |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.11 | Columng3annintegName | read-only | mandatory | An object containing the first 24 characters of the announcement |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.12 | Columng3annintegMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.13 | Columng3annintegPlayReqts | read-only | mandatory | An object containing total number of calls that requested a play of this announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.14 | Columng3annintegCallsQueued | read-only | mandatory | An object containing number of calls for an announcement that had to queue waiting for a port during the period |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.15 | Columng3annintegASP | read-only | mandatory | An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the wai… |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.16 | Columng3annintegQueueDrops | read-only | mandatory | An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller … |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.17 | Columng3annintegMPortPlay | read-only | mandatory | An object containing count of how many times the announcement is being played out of more than one port at the same time during the period |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.18 | Columng3annintegMaxPorts | read-only | mandatory | An object containing the peak number of ports used for the announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.99.6.1.19 | Columng3annintegMaxCall | read-only | mandatory | An object containing the peak number callers connected to a board (sum of the ports) at the same time |
| 1.3.6.1.4.1.6889.2.8.1.100 | Nodeg3pkanninteg | |||
| 1.3.6.1.4.1.6889.2.8.1.100.1 | Scalarg3pkannintegTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkannintegintvl object allows the Ne… |
| 1.3.6.1.4.1.6889.2.8.1.100.2 | Scalarg3pkannintegTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.100.3 | Scalarg3pkannintegTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.100.4 | Scalarg3pkannintegTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.100.5 | Scalarg3pkannintegTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.100.6 | Tableg3pkannintegTable | not-accessible | mandatory | A list of g3pkanninteg entries. |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1 | Rowg3pkannintegEntry | not-accessible | mandatory | A g3pkanninteg entry containing objects of the g3pkanninteg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.1 | Columng3pkannintegBoard | read-only | mandatory | An object containing the number of the integrated announcement board |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.2 | Columng3pkannintegYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.3 | Columng3pkannintegMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.4 | Columng3pkannintegDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.5 | Columng3pkannintegHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.6 | Columng3pkannintegPlayPorts | read-only | mandatory | An object containing the number of ports on the board which can play the announcements. |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.7 | Columng3pkannintegMaxCallPeriod | read-only | mandatory | An object containing the Maximum number of Callers on Board in the Period |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.8 | Columng3pkannintegAllPortsBusy | read-only | mandatory | An object containing an indication of how frequently the all-ports-busy condition occurs within the period of time |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.9 | Columng3pkannintegAnnNbr | read-only | mandatory | An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3pkannintegExtension field instead since the a… |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.10 | Columng3pkannintegExtension | read-only | mandatory | An object containing the extension number for the announcement |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.11 | Columng3pkannintegName | read-only | mandatory | An object containing the first 24 characters of the announcement |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.12 | Columng3pkannintegMeasHour | read-only | mandatory | An object containing the Hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.13 | Columng3pkannintegPlayReqts | read-only | mandatory | An object containing total number of calls that requested a play of this announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.14 | Columng3pkannintegCallsQueued | read-only | mandatory | An object containing number of calls for an announcement that had to queue waiting for a port during the period |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.15 | Columng3pkannintegASP | read-only | mandatory | An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the wai… |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.16 | Columng3pkannintegQueueDrops | read-only | mandatory | An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller … |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.17 | Columng3pkannintegMPortPlay | read-only | mandatory | An object containing count of how many times the announcement is being played out of more than one port at the same time during the period |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.18 | Columng3pkannintegMaxPorts | read-only | mandatory | An object containing the peak number of ports used for the announcement during the period |
| 1.3.6.1.4.1.6889.2.8.1.100.6.1.19 | Columng3pkannintegMaxCall | read-only | mandatory | An object containing the peak number callers connected to a board (sum of the ports) at the same time |
| 1.3.6.1.4.1.6889.2.8.1.101 | Nodeg3nodename | |||
| 1.3.6.1.4.1.6889.2.8.1.101.1 | Scalarg3nodenameTage | read-only | mandatory | The number of timeticks since the node name data was last extracted from the switch by the Proxy Agent. This object along with the g3nodenameintvl object allow… |
| 1.3.6.1.4.1.6889.2.8.1.101.2 | Scalarg3nodenameTintvl | read-write | mandatory | An object containing the interval for which the node name data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request… |
| 1.3.6.1.4.1.6889.2.8.1.101.3 | Scalarg3nodenameTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.101.4 | Scalarg3nodenameTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.101.5 | Scalarg3nodenameTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.101.6 | Tableg3nodenameTable | not-accessible | mandatory | A list of g3nodename entries. |
| 1.3.6.1.4.1.6889.2.8.1.101.6.1 | Rowg3nodenameEntry | not-accessible | mandatory | A g3nodename entry containing objects of the g3nodename information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.101.6.1.1 | Columng3nodenameName | read-only | mandatory | This MIB Group displays the names of all the nodes that are administered on the system. |
| 1.3.6.1.4.1.6889.2.8.1.101.6.1.2 | Columng3nodenameType | read-only | mandatory | An object containing the type of the node |
| 1.3.6.1.4.1.6889.2.8.1.101.6.1.3 | Columng3nodenameIP1 | read-only | mandatory | An object containing the first octet of the IP address |
| 1.3.6.1.4.1.6889.2.8.1.101.6.1.4 | Columng3nodenameIP2 | read-only | mandatory | An object containing the second octet of the IP address |
| 1.3.6.1.4.1.6889.2.8.1.101.6.1.5 | Columng3nodenameIP3 | read-only | mandatory | An object containing the third octet of the IP address |
| 1.3.6.1.4.1.6889.2.8.1.101.6.1.6 | Columng3nodenameIP4 | read-only | mandatory | An object containing the fourth octet of the IP address |
| 1.3.6.1.4.1.6889.2.8.1.102 | Nodeg3trkgrpmem | |||
| 1.3.6.1.4.1.6889.2.8.1.102.1 | Scalarg3trkgrpmemTage | read-only | mandatory | The number of timeticks since the trunk group member data was last extracted from the switch by the Proxy Agent. This object along with the g3trkgrpmemintvl ob… |
| 1.3.6.1.4.1.6889.2.8.1.102.2 | Scalarg3trkgrpmemTintvl | read-write | mandatory | An object containing the interval for which the trunk group member data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEX… |
| 1.3.6.1.4.1.6889.2.8.1.102.3 | Scalarg3trkgrpmemTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.102.4 | Scalarg3trkgrpmemTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.102.5 | Scalarg3trkgrpmemTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.102.6 | Tableg3trkgrpmemTable | not-accessible | mandatory | A list of g3trkgrpmem entries. |
| 1.3.6.1.4.1.6889.2.8.1.102.6.1 | Rowg3trkgrpmemEntry | not-accessible | mandatory | A g3trkgrpmem entry containing objects of the g3trkgrpmem information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.102.6.1.1 | Columng3trkgrpmemGroup | read-only | mandatory | An INTEGER Object that uniquely identifies an administered trunk group. |
| 1.3.6.1.4.1.6889.2.8.1.102.6.1.2 | Columng3trkgrpmemMember | read-only | mandatory | An INTEGER Object that uniquely identifies a trunk group member. Trunk group members range from 1 to 666 and exist whether or not they are assigned a port. |
| 1.3.6.1.4.1.6889.2.8.1.102.6.1.3 | Columng3trkgrpmemName | read-only | mandatory | A DisplayString Object containing the name assigned to the trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.102.6.1.4 | Columng3trkgrpmemType | read-only | mandatory | A DisplayString Object containing the Type of the trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.102.6.1.5 | Columng3trkgrpmemSigGroup | read-only | mandatory | A DisplayString Object containing the Signaling Group assigned to the trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.102.6.1.6 | Columng3trkgrpmemPort | read-only | mandatory | A DisplayString Object that uniquely identifies the trunk port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22)… |
| 1.3.6.1.4.1.6889.2.8.1.103 | Nodeg3ipinterface | |||
| 1.3.6.1.4.1.6889.2.8.1.103.1 | Scalarg3ipinterfaceTage | read-only | mandatory | The number of timeticks since the ip interface data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ipinterfaceintvl obj… |
| 1.3.6.1.4.1.6889.2.8.1.103.2 | Scalarg3ipinterfaceTintvl | read-write | mandatory | An object containing the interval for which the ip interface data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.103.3 | Scalarg3ipinterfaceTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.103.4 | Scalarg3ipinterfaceTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.103.5 | Scalarg3ipinterfaceNodeName1 | read-only | mandatory | An object containing the the node-name for the ip interface |
| 1.3.6.1.4.1.6889.2.8.1.103.6 | Scalarg3ipinterfaceNodeName2 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.7 | Scalarg3ipinterfaceNodeName3 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.8 | Scalarg3ipinterfaceNodeName4 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.9 | Scalarg3ipinterfaceNodeName5 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.10 | Scalarg3ipinterfaceNodeName6 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.11 | Scalarg3ipinterfaceNodeName7 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.12 | Scalarg3ipinterfaceNodeName8 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.13 | Scalarg3ipinterfaceNodeName9 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.14 | Scalarg3ipinterfaceNodeName10 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.15 | Scalarg3ipinterfaceNodeName11 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.16 | Scalarg3ipinterfaceNodeName12 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.17 | Scalarg3ipinterfaceNodeName13 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.18 | Scalarg3ipinterfaceNodeName14 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.19 | Scalarg3ipinterfaceNodeName15 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.20 | Scalarg3ipinterfaceNodeName16 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.21 | Scalarg3ipinterfaceNodeName17 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.22 | Scalarg3ipinterfaceNodeName18 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.23 | Scalarg3ipinterfaceNodeName19 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.24 | Scalarg3ipinterfaceNodeName20 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.25 | Scalarg3ipinterfaceNodeName21 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.26 | Scalarg3ipinterfaceNodeName22 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.27 | Scalarg3ipinterfaceNodeName23 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.28 | Scalarg3ipinterfaceNodeName24 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.29 | Scalarg3ipinterfaceNodeName25 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.30 | Scalarg3ipinterfaceNodeName26 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.31 | Scalarg3ipinterfaceNodeName27 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.32 | Scalarg3ipinterfaceNodeName28 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.33 | Scalarg3ipinterfaceNodeName29 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.34 | Scalarg3ipinterfaceNodeName30 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.35 | Scalarg3ipinterfaceNodeName31 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.36 | Scalarg3ipinterfaceNodeName32 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.37 | Scalarg3ipinterfaceNodeName33 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.38 | Scalarg3ipinterfaceNodeName34 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.39 | Scalarg3ipinterfaceNodeName35 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.40 | Scalarg3ipinterfaceNodeName36 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.41 | Scalarg3ipinterfaceNodeName37 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.42 | Scalarg3ipinterfaceNodeName38 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.43 | Scalarg3ipinterfaceNodeName39 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.44 | Scalarg3ipinterfaceNodeName40 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.45 | Scalarg3ipinterfaceNodeName41 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.46 | Scalarg3ipinterfaceNodeName42 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.47 | Scalarg3ipinterfaceNodeName43 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.48 | Scalarg3ipinterfaceNodeName44 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.49 | Scalarg3ipinterfaceNodeName45 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.50 | Scalarg3ipinterfaceNodeName46 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.51 | Scalarg3ipinterfaceNodeName47 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.52 | Scalarg3ipinterfaceNodeName48 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.53 | Scalarg3ipinterfaceNodeName49 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.54 | Scalarg3ipinterfaceNodeName50 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.55 | Scalarg3ipinterfaceNodeName51 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.56 | Scalarg3ipinterfaceNodeName52 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.57 | Scalarg3ipinterfaceNodeName53 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.58 | Scalarg3ipinterfaceNodeName54 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.59 | Scalarg3ipinterfaceNodeName55 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.60 | Scalarg3ipinterfaceNodeName56 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.61 | Scalarg3ipinterfaceNodeName57 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.62 | Scalarg3ipinterfaceNodeName58 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.63 | Scalarg3ipinterfaceNodeName59 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.64 | Scalarg3ipinterfaceNodeName60 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.65 | Scalarg3ipinterfaceNodeName61 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.66 | Scalarg3ipinterfaceNodeName62 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.67 | Scalarg3ipinterfaceNodeName63 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.68 | Scalarg3ipinterfaceNodeName64 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.69 | Scalarg3ipinterfaceNodeName65 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.70 | Scalarg3ipinterfaceNodeName66 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.71 | Scalarg3ipinterfaceNodeName67 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.72 | Scalarg3ipinterfaceNodeName68 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.73 | Scalarg3ipinterfaceNodeName69 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.74 | Scalarg3ipinterfaceNodeName70 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.75 | Scalarg3ipinterfaceNodeName71 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.76 | Scalarg3ipinterfaceNodeName72 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.77 | Scalarg3ipinterfaceNodeName73 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.78 | Scalarg3ipinterfaceNodeName74 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.79 | Scalarg3ipinterfaceNodeName75 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.80 | Scalarg3ipinterfaceNodeName76 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.81 | Scalarg3ipinterfaceNodeName77 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.82 | Scalarg3ipinterfaceNodeName78 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.83 | Scalarg3ipinterfaceNodeName79 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.84 | Scalarg3ipinterfaceNodeName80 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.85 | Scalarg3ipinterfaceNodeName81 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.86 | Scalarg3ipinterfaceNodeName82 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.87 | Scalarg3ipinterfaceNodeName83 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.88 | Scalarg3ipinterfaceNodeName84 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.89 | Scalarg3ipinterfaceNodeName85 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceNodeName1. |
| 1.3.6.1.4.1.6889.2.8.1.103.90 | Scalarg3ipinterfaceSlot1 | read-only | mandatory | An object containing the the VAL, CLAN or MEDPRO board slot number |
| 1.3.6.1.4.1.6889.2.8.1.103.91 | Scalarg3ipinterfaceSlot2 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.92 | Scalarg3ipinterfaceSlot3 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.93 | Scalarg3ipinterfaceSlot4 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.94 | Scalarg3ipinterfaceSlot5 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.95 | Scalarg3ipinterfaceSlot6 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.96 | Scalarg3ipinterfaceSlot7 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.97 | Scalarg3ipinterfaceSlot8 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.98 | Scalarg3ipinterfaceSlot9 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.99 | Scalarg3ipinterfaceSlot10 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.100 | Scalarg3ipinterfaceSlot11 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.101 | Scalarg3ipinterfaceSlot12 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.102 | Scalarg3ipinterfaceSlot13 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.103 | Scalarg3ipinterfaceSlot14 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.104 | Scalarg3ipinterfaceSlot15 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.105 | Scalarg3ipinterfaceSlot16 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.106 | Scalarg3ipinterfaceSlot17 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.107 | Scalarg3ipinterfaceSlot18 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.108 | Scalarg3ipinterfaceSlot19 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.109 | Scalarg3ipinterfaceSlot20 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.110 | Scalarg3ipinterfaceSlot21 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.111 | Scalarg3ipinterfaceSlot22 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.112 | Scalarg3ipinterfaceSlot23 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.113 | Scalarg3ipinterfaceSlot24 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.114 | Scalarg3ipinterfaceSlot25 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.115 | Scalarg3ipinterfaceSlot26 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.116 | Scalarg3ipinterfaceSlot27 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.117 | Scalarg3ipinterfaceSlot28 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.118 | Scalarg3ipinterfaceSlot29 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.119 | Scalarg3ipinterfaceSlot30 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.120 | Scalarg3ipinterfaceSlot31 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.121 | Scalarg3ipinterfaceSlot32 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.122 | Scalarg3ipinterfaceSlot33 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.123 | Scalarg3ipinterfaceSlot34 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.124 | Scalarg3ipinterfaceSlot35 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.125 | Scalarg3ipinterfaceSlot36 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.126 | Scalarg3ipinterfaceSlot37 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.127 | Scalarg3ipinterfaceSlot38 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.128 | Scalarg3ipinterfaceSlot39 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.129 | Scalarg3ipinterfaceSlot40 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.130 | Scalarg3ipinterfaceSlot41 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.131 | Scalarg3ipinterfaceSlot42 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.132 | Scalarg3ipinterfaceSlot43 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.133 | Scalarg3ipinterfaceSlot44 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.134 | Scalarg3ipinterfaceSlot45 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.135 | Scalarg3ipinterfaceSlot46 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.136 | Scalarg3ipinterfaceSlot47 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.137 | Scalarg3ipinterfaceSlot48 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.138 | Scalarg3ipinterfaceSlot49 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.139 | Scalarg3ipinterfaceSlot50 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.140 | Scalarg3ipinterfaceSlot51 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.141 | Scalarg3ipinterfaceSlot52 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.142 | Scalarg3ipinterfaceSlot53 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.143 | Scalarg3ipinterfaceSlot54 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.144 | Scalarg3ipinterfaceSlot55 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.145 | Scalarg3ipinterfaceSlot56 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.146 | Scalarg3ipinterfaceSlot57 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.147 | Scalarg3ipinterfaceSlot58 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.148 | Scalarg3ipinterfaceSlot59 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.149 | Scalarg3ipinterfaceSlot60 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.150 | Scalarg3ipinterfaceSlot61 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.151 | Scalarg3ipinterfaceSlot62 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.152 | Scalarg3ipinterfaceSlot63 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.153 | Scalarg3ipinterfaceSlot64 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.154 | Scalarg3ipinterfaceSlot65 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.155 | Scalarg3ipinterfaceSlot66 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.156 | Scalarg3ipinterfaceSlot67 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.157 | Scalarg3ipinterfaceSlot68 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.158 | Scalarg3ipinterfaceSlot69 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.159 | Scalarg3ipinterfaceSlot70 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.160 | Scalarg3ipinterfaceSlot71 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.161 | Scalarg3ipinterfaceSlot72 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.162 | Scalarg3ipinterfaceSlot73 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.163 | Scalarg3ipinterfaceSlot74 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.164 | Scalarg3ipinterfaceSlot75 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.165 | Scalarg3ipinterfaceSlot76 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.166 | Scalarg3ipinterfaceSlot77 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.167 | Scalarg3ipinterfaceSlot78 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.168 | Scalarg3ipinterfaceSlot79 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.169 | Scalarg3ipinterfaceSlot80 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.170 | Scalarg3ipinterfaceSlot81 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.171 | Scalarg3ipinterfaceSlot82 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.172 | Scalarg3ipinterfaceSlot83 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.173 | Scalarg3ipinterfaceSlot84 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.103.174 | Scalarg3ipinterfaceSlot85 | read-only | mandatory | See DESCRIPTION of g3ipinterfaceSlot1. |
| 1.3.6.1.4.1.6889.2.8.1.104 | Nodeg3gateway | |||
| 1.3.6.1.4.1.6889.2.8.1.104.1 | Scalarg3gatewayTage | read-only | mandatory | The number of timeticks since the gateway data was last extracted from the switch by the Proxy Agent. This object along with the g3gatewayintvl object allows t… |
| 1.3.6.1.4.1.6889.2.8.1.104.2 | Scalarg3gatewayTintvl | read-write | mandatory | An object containing the interval for which the gateway data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request f… |
| 1.3.6.1.4.1.6889.2.8.1.104.3 | Scalarg3gatewayTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.104.4 | Scalarg3gatewayTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.104.5 | Scalarg3gatewayTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.104.6 | Tableg3gatewayTable | not-accessible | mandatory | A list of g3gateway entries. |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1 | Rowg3gatewayEntry | not-accessible | mandatory | A g3gateway entry containing objects of the g3gateway information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.1 | Columng3gatewayNumber | read-only | mandatory | An object containing the Media Gateway number |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.2 | Columng3gatewayName | read-only | mandatory | An object containing the Media Gateway name |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.3 | Columng3gatewayIdentifier | read-only | mandatory | An object containing the Media Gateway identifier (either the serial number or other alpha-numeric characters for identification) |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.4 | Columng3gatewayIPAddress | read-only | mandatory | An object containing the IP adrress of the Media Gateway |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.5 | Columng3gatewayMACAddress | read-only | mandatory | An object containing the MAC address of the Media Gateway |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.6 | Columng3gatewayRegion | read-only | mandatory | An object containing the network region for the Media Gateway |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.7 | Columng3gatewayLocation | read-only | mandatory | An object containing information about time-zone offset, daylight savings rule and number plan area code. |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.8 | Columng3gatewaySiteData1 | read-only | mandatory | An object containing general site information |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.9 | Columng3gatewaySiteData2 | read-only | mandatory | An object containing general site information |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.10 | Columng3gatewayG700ModTypeV1 | read-only | mandatory | An object containing the hardware contained in the G700 media module slot V1 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.11 | Columng3gatewayG700ModTypeV2 | read-only | mandatory | An object containing the hardware contained in the G700 media module slot V2 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.12 | Columng3gatewayG700ModTypeV3 | read-only | mandatory | An object containing the hardware contained in the G700 media module slot V3 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.13 | Columng3gatewayG700ModTypeV4 | read-only | mandatory | An object containing the hardware contained in the G700 media module slot V4 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.14 | Columng3gatewayG700ModTypeV8 | read-only | mandatory | An object containing the hardware contained in the G700 media module slot V8 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.15 | Columng3gatewayG700ModTypeV9 | read-only | mandatory | An object containing the hardware contained in the G700 media module slot V9 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.16 | Columng3gatewayRegistered | read-only | mandatory | An object containing information about whether a Media Gateway is registered with a communications controller. |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.17 | Columng3gatewayType | read-only | mandatory | An object containing the type of media gateway (G700 or G350). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.18 | Columng3gatewayFWVintage | read-only | mandatory | An object containing the firmware version of the media gateway processor (for G700) or the single firmware image on the motherboard (for G350). This value may … |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.19 | Columng3gatewayHWVintage | read-only | mandatory | An object containing the hardware version of the media gateway. This value may not be available for a G700 with older firmware and is only available if th medi… |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.20 | Columng3gatewayNearEndIP | read-only | mandatory | An object containing the IP address of the CLAN or S8300 to which the media gateway is registered. |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.21 | Columng3gatewayEncrypt | read-only | mandatory | An object indicating whether or not the media gateway is using encryption (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.22 | Columng3gatewayG350ModTypeV1 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V1 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.23 | Columng3gatewayG350ModTypeV2 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V2 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.24 | Columng3gatewayG350ModTypeV3 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V3 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.25 | Columng3gatewayG350ModTypeV4 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V4 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.26 | Columng3gatewayG350ModTypeV5 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V5 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.27 | Columng3gatewayG350ModTypeV6 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V6 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.28 | Columng3gatewayG350ModTypeV7 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V7 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.29 | Columng3gatewayG350ModTypeV9 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V9 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.30 | Columng3gatewayRecoveryRule | read-only | mandatory | An object containing the recovery rule that is to be used by this media gateway for auto fail back to primary; acceptable values are 1-250 or none; the default… |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.31 | Columng3gatewayG350ModTypeV8 | read-only | mandatory | An object containing the hardware contained in the G350 media module slot V8 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.32 | Columng3gatewayG450ModTypeV1 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V1 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.33 | Columng3gatewayG450ModTypeV2 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V2 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.34 | Columng3gatewayG450ModTypeV3 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V3 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.35 | Columng3gatewayG450ModTypeV4 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V4 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.36 | Columng3gatewayG450ModTypeV5 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V5 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.37 | Columng3gatewayG450ModTypeV6 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V6 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.38 | Columng3gatewayG450ModTypeV7 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V7 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.39 | Columng3gatewayG450ModTypeV8 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V8 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.40 | Columng3gatewayG450ModTypeV9 | read-only | mandatory | An object containing the hardware contained in the G450 media module slot V9 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.41 | Columng3gatewayG250ModTypeV1 | read-only | mandatory | An object containing the hardware contained in the G250 media module slot V1 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.42 | Columng3gatewayG250ModTypeV2 | read-only | mandatory | An object containing the hardware contained in the G250 media module slot V2 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.43 | Columng3gatewayG250ModTypeV3 | read-only | mandatory | An object containing the hardware contained in the G250 media module slot V3 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.44 | Columng3gatewayG250ModTypeV4 | read-only | mandatory | An object containing the hardware contained in the G250 media module slot V4 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.45 | Columng3gatewayG250ModTypeV9 | read-only | mandatory | An object containing the hardware contained in the G250 media module slot V9 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.46 | Columng3gatewayJ6350J4350ModTypeV1 | read-only | mandatory | An object containing the hardware contained in the J6350 or J4350 media module slot V1 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.47 | Columng3gatewayJ6350J4350ModTypeV2 | read-only | mandatory | An object containing the hardware contained in the J6350 or J4350 media module slot V2 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.48 | Columng3gatewayJ6350J4350ModTypeV3 | read-only | mandatory | An object containing the hardware contained in the J6350 or J4350 media module slot V3 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.49 | Columng3gatewayJ6350J4350ModTypeV4 | read-only | mandatory | An object containing the hardware contained in the J6350 or J4350 media module slot V4 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.50 | Columng3gatewayJ6350J4350ModTypeV5 | read-only | mandatory | An object containing the hardware contained in the J6350 or J4350 media module slot V5 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.51 | Columng3gatewayJ6350J4350ModTypeV6 | read-only | mandatory | An object containing the hardware contained in the J6350 or J4350 media module slot V6 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.52 | Columng3gatewayJ6350J4350ModTypeV9 | read-only | mandatory | An object containing the hardware contained in the J6350 or J4350 media module slot V9 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.53 | Columng3gatewayJ2320ModTypeV1 | read-only | mandatory | An object containing the hardware contained in the J2320 media module slot V1 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.54 | Columng3gatewayJ2320ModTypeV2 | read-only | mandatory | An object containing the hardware contained in the J2320 media module slot V2 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.55 | Columng3gatewayJ2320ModTypeV3 | read-only | mandatory | An object containing the hardware contained in the J2320 media module slot V3 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.56 | Columng3gatewayJ2320ModTypeV9 | read-only | mandatory | An object containing the hardware contained in the J2320 media module slot V9 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.57 | Columng3gatewayJ2350ModTypeV1 | read-only | mandatory | An object containing the hardware contained in the J2350 media module slot V1 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.58 | Columng3gatewayJ2350ModTypeV2 | read-only | mandatory | An object containing the hardware contained in the J2350 media module slot V2 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.59 | Columng3gatewayJ2350ModTypeV3 | read-only | mandatory | An object containing the hardware contained in the J2350 media module slot V3 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.60 | Columng3gatewayJ2350ModTypeV4 | read-only | mandatory | An object containing the hardware contained in the J2350 media module slot V4(if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.61 | Columng3gatewayJ2350ModTypeV5 | read-only | mandatory | An object containing the hardware contained in the J2350 media module slot V5(if any). |
| 1.3.6.1.4.1.6889.2.8.1.104.6.1.62 | Columng3gatewayJ2350ModTypeV9 | read-only | mandatory | An object containing the hardware contained in the J2350 media module slot V9 (if any). |
| 1.3.6.1.4.1.6889.2.8.1.105 | Nodeg3mediacfg | |||
| 1.3.6.1.4.1.6889.2.8.1.105.1 | Scalarg3mediacfgTage | read-only | mandatory | The number of timeticks since the media config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3mediacfgTintvl object all… |
| 1.3.6.1.4.1.6889.2.8.1.105.2 | Scalarg3mediacfgTintvl | read-write | mandatory | An object containing the interval for which the media config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT requ… |
| 1.3.6.1.4.1.6889.2.8.1.105.3 | Scalarg3mediacfgTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.105.4 | Scalarg3mediacfgTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.105.5 | Scalarg3mediacfgTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.105.6 | Tableg3mediacfgTable | not-accessible | mandatory | A list of g3mediacfg entries. |
| 1.3.6.1.4.1.6889.2.8.1.105.6.1 | Rowg3mediacfgEntry | not-accessible | mandatory | A g3mediacfg entry containing objects of the g3mediacfg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.105.6.1.1 | Columng3mediacfgBoardNum | read-only | mandatory | A DisplayString Object that uniquely identifies a station board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-… |
| 1.3.6.1.4.1.6889.2.8.1.105.6.1.2 | Columng3mediacfgBoardType | read-only | mandatory | A DisplayString Object that contains a text description of the type of media gateway board. |
| 1.3.6.1.4.1.6889.2.8.1.105.6.1.3 | Columng3mediacfgCode | read-only | mandatory | A DisplayString Object that contains the code that defines the type of media gateway board. |
| 1.3.6.1.4.1.6889.2.8.1.105.6.1.4 | Columng3mediacfgVintage | read-only | mandatory | A DisplayString Object that contains the vintage of the media gateway board. |
| 1.3.6.1.4.1.6889.2.8.1.105.6.1.5 | Columng3mediacfgSuffix | read-only | mandatory | A DisplayString Object that contains the suffix to the code |
| 1.3.6.1.4.1.6889.2.8.1.106 | Nodeg3stamedia | |||
| 1.3.6.1.4.1.6889.2.8.1.106.1 | Scalarg3stamediaTage | read-only | mandatory | The number of timeticks since the media gateway status data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamediaintv… |
| 1.3.6.1.4.1.6889.2.8.1.106.2 | Scalarg3stamediaTintvl | read-write | mandatory | An object containing the interval for which the media gateway data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT req… |
| 1.3.6.1.4.1.6889.2.8.1.106.3 | Scalarg3stamediaTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.106.4 | Scalarg3stamediaTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.106.5 | Scalarg3stamediaAlarmMajor | read-only | mandatory | An object containing the total number of major alarms existing on the media gateways administered in the system. |
| 1.3.6.1.4.1.6889.2.8.1.106.6 | Scalarg3stamediaAlarmMinor | read-only | mandatory | An object containing the total number of minor alarms existing on the media gateways administered in the system. |
| 1.3.6.1.4.1.6889.2.8.1.106.7 | Scalarg3stamediaAlarmWarning | read-only | mandatory | An object containing the total number of warnings existing on the media gateways administered in a system. |
| 1.3.6.1.4.1.6889.2.8.1.106.8 | Scalarg3stamediaBusyOutTrunks | read-only | mandatory | An object containing the total number of busied out trunks existing on the media gateways administered in the system. |
| 1.3.6.1.4.1.6889.2.8.1.106.9 | Scalarg3stamediaBusyOutStations | read-only | mandatory | An object containing the total number of busied out stations existing on the media gateways administered in the system. |
| 1.3.6.1.4.1.6889.2.8.1.106.10 | Scalarg3stamediaH248LinksDown | read-only | mandatory | An object containing the total number of media gateways administered in a system that do not have a H.248 link established to the media gateway controller. |
| 1.3.6.1.4.1.6889.2.8.1.106.11 | Scalarg3stamediaH248LinksUp | read-only | mandatory | An object containing the total number of media gateways administered in a system that do have a H.248 link established to the media gateway controller. |
| 1.3.6.1.4.1.6889.2.8.1.106.12 | Scalarg3stamediaNbrLogins | read-only | mandatory | An object containing the total number of logins into the system. |
| 1.3.6.1.4.1.6889.2.8.1.106.13 | Scalarg3stamediaGatewayStatus1 | read-only | mandatory | An object containing the status of the first set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link stat… |
| 1.3.6.1.4.1.6889.2.8.1.106.14 | Scalarg3stamediaGatewayStatus2 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.106.15 | Scalarg3stamediaGatewayStatus3 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.106.16 | Scalarg3stamediaGatewayStatus4 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.106.17 | Scalarg3stamediaGatewayStatus5 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.106.18 | Scalarg3stamediaGatewayStatus6 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.106.19 | Scalarg3stamediaGatewayStatus7 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.106.20 | Scalarg3stamediaGatewayStatus8 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.106.21 | Scalarg3stamediaGatewayStatus9 | read-only | mandatory | An object containing the status of the second set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link sta… |
| 1.3.6.1.4.1.6889.2.8.1.106.22 | Scalarg3stamediaGatewayStatus10 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus9. |
| 1.3.6.1.4.1.6889.2.8.1.106.23 | Scalarg3stamediaGatewayStatus11 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus9. |
| 1.3.6.1.4.1.6889.2.8.1.106.24 | Scalarg3stamediaGatewayStatus12 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus9. |
| 1.3.6.1.4.1.6889.2.8.1.106.25 | Scalarg3stamediaGatewayStatus13 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus9. |
| 1.3.6.1.4.1.6889.2.8.1.106.26 | Scalarg3stamediaGatewayStatus14 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus9. |
| 1.3.6.1.4.1.6889.2.8.1.106.27 | Scalarg3stamediaGatewayStatus15 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus9. |
| 1.3.6.1.4.1.6889.2.8.1.106.28 | Scalarg3stamediaGatewayStatus16 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus9. |
| 1.3.6.1.4.1.6889.2.8.1.106.29 | Scalarg3stamediaGatewayStatus17 | read-only | mandatory | An object containing the status of the third set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link stat… |
| 1.3.6.1.4.1.6889.2.8.1.106.30 | Scalarg3stamediaGatewayStatus18 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus17. |
| 1.3.6.1.4.1.6889.2.8.1.106.31 | Scalarg3stamediaGatewayStatus19 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus17. |
| 1.3.6.1.4.1.6889.2.8.1.106.32 | Scalarg3stamediaGatewayStatus20 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus17. |
| 1.3.6.1.4.1.6889.2.8.1.106.33 | Scalarg3stamediaGatewayStatus21 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus17. |
| 1.3.6.1.4.1.6889.2.8.1.106.34 | Scalarg3stamediaGatewayStatus22 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus17. |
| 1.3.6.1.4.1.6889.2.8.1.106.35 | Scalarg3stamediaGatewayStatus23 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus17. |
| 1.3.6.1.4.1.6889.2.8.1.106.36 | Scalarg3stamediaGatewayStatus24 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus17. |
| 1.3.6.1.4.1.6889.2.8.1.106.37 | Scalarg3stamediaGatewayStatus25 | read-only | mandatory | An object containing the status of the fourth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link sta… |
| 1.3.6.1.4.1.6889.2.8.1.106.38 | Scalarg3stamediaGatewayStatus26 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus25. |
| 1.3.6.1.4.1.6889.2.8.1.106.39 | Scalarg3stamediaGatewayStatus27 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus25. |
| 1.3.6.1.4.1.6889.2.8.1.106.40 | Scalarg3stamediaGatewayStatus28 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus25. |
| 1.3.6.1.4.1.6889.2.8.1.106.41 | Scalarg3stamediaGatewayStatus29 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus25. |
| 1.3.6.1.4.1.6889.2.8.1.106.42 | Scalarg3stamediaGatewayStatus30 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus25. |
| 1.3.6.1.4.1.6889.2.8.1.106.43 | Scalarg3stamediaGatewayStatus31 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus25. |
| 1.3.6.1.4.1.6889.2.8.1.106.44 | Scalarg3stamediaGatewayStatus32 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus25. |
| 1.3.6.1.4.1.6889.2.8.1.106.45 | Scalarg3stamediaGatewayStatus33 | read-only | mandatory | An object containing the status of the fifth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link stat… |
| 1.3.6.1.4.1.6889.2.8.1.106.46 | Scalarg3stamediaGatewayStatus34 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus33. |
| 1.3.6.1.4.1.6889.2.8.1.106.47 | Scalarg3stamediaGatewayStatus35 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus33. |
| 1.3.6.1.4.1.6889.2.8.1.106.48 | Scalarg3stamediaGatewayStatus36 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus33. |
| 1.3.6.1.4.1.6889.2.8.1.106.49 | Scalarg3stamediaGatewayStatus37 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus33. |
| 1.3.6.1.4.1.6889.2.8.1.106.50 | Scalarg3stamediaGatewayStatus38 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus33. |
| 1.3.6.1.4.1.6889.2.8.1.106.51 | Scalarg3stamediaGatewayStatus39 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus33. |
| 1.3.6.1.4.1.6889.2.8.1.106.52 | Scalarg3stamediaGatewayStatus40 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus33. |
| 1.3.6.1.4.1.6889.2.8.1.106.53 | Scalarg3stamediaGatewayStatus41 | read-only | mandatory | An object containing the status of the sixth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link stat… |
| 1.3.6.1.4.1.6889.2.8.1.106.54 | Scalarg3stamediaGatewayStatus42 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus41. |
| 1.3.6.1.4.1.6889.2.8.1.106.55 | Scalarg3stamediaGatewayStatus43 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus41. |
| 1.3.6.1.4.1.6889.2.8.1.106.56 | Scalarg3stamediaGatewayStatus44 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus41. |
| 1.3.6.1.4.1.6889.2.8.1.106.57 | Scalarg3stamediaGatewayStatus45 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus41. |
| 1.3.6.1.4.1.6889.2.8.1.106.58 | Scalarg3stamediaGatewayStatus46 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus41. |
| 1.3.6.1.4.1.6889.2.8.1.106.59 | Scalarg3stamediaGatewayStatus47 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus41. |
| 1.3.6.1.4.1.6889.2.8.1.106.60 | Scalarg3stamediaGatewayStatus48 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus41. |
| 1.3.6.1.4.1.6889.2.8.1.106.61 | Scalarg3stamediaGatewayStatus49 | read-only | mandatory | An object containing the status of the seventh set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link st… |
| 1.3.6.1.4.1.6889.2.8.1.106.62 | Scalarg3stamediaGatewayStatus50 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus49. |
| 1.3.6.1.4.1.6889.2.8.1.106.63 | Scalarg3stamediaGatewayStatus51 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus49. |
| 1.3.6.1.4.1.6889.2.8.1.106.64 | Scalarg3stamediaGatewayStatus52 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus49. |
| 1.3.6.1.4.1.6889.2.8.1.106.65 | Scalarg3stamediaGatewayStatus53 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus49. |
| 1.3.6.1.4.1.6889.2.8.1.106.66 | Scalarg3stamediaGatewayStatus54 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus49. |
| 1.3.6.1.4.1.6889.2.8.1.106.67 | Scalarg3stamediaGatewayStatus55 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus49. |
| 1.3.6.1.4.1.6889.2.8.1.106.68 | Scalarg3stamediaGatewayStatus56 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus49. |
| 1.3.6.1.4.1.6889.2.8.1.106.69 | Scalarg3stamediaGatewayStatus57 | read-only | mandatory | An object containing the status of the eighth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link sta… |
| 1.3.6.1.4.1.6889.2.8.1.106.70 | Scalarg3stamediaGatewayStatus58 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus57. |
| 1.3.6.1.4.1.6889.2.8.1.106.71 | Scalarg3stamediaGatewayStatus59 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus57. |
| 1.3.6.1.4.1.6889.2.8.1.106.72 | Scalarg3stamediaGatewayStatus60 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus57. |
| 1.3.6.1.4.1.6889.2.8.1.106.73 | Scalarg3stamediaGatewayStatus61 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus57. |
| 1.3.6.1.4.1.6889.2.8.1.106.74 | Scalarg3stamediaGatewayStatus62 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus57. |
| 1.3.6.1.4.1.6889.2.8.1.106.75 | Scalarg3stamediaGatewayStatus63 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus57. |
| 1.3.6.1.4.1.6889.2.8.1.106.76 | Scalarg3stamediaGatewayStatus64 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus57. |
| 1.3.6.1.4.1.6889.2.8.1.106.77 | Scalarg3stamediaGatewayStatus65 | read-only | mandatory | An object containing the status of the ninth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link stat… |
| 1.3.6.1.4.1.6889.2.8.1.106.78 | Scalarg3stamediaGatewayStatus66 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus65. |
| 1.3.6.1.4.1.6889.2.8.1.106.79 | Scalarg3stamediaGatewayStatus67 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus65. |
| 1.3.6.1.4.1.6889.2.8.1.106.80 | Scalarg3stamediaGatewayStatus68 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus65. |
| 1.3.6.1.4.1.6889.2.8.1.106.81 | Scalarg3stamediaGatewayStatus69 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus65. |
| 1.3.6.1.4.1.6889.2.8.1.106.82 | Scalarg3stamediaGatewayStatus70 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus65. |
| 1.3.6.1.4.1.6889.2.8.1.106.83 | Scalarg3stamediaGatewayStatus71 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus65. |
| 1.3.6.1.4.1.6889.2.8.1.106.84 | Scalarg3stamediaGatewayStatus72 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus65. |
| 1.3.6.1.4.1.6889.2.8.1.106.85 | Scalarg3stamediaGatewayStatus73 | read-only | mandatory | An object containing the status of the tenth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link stat… |
| 1.3.6.1.4.1.6889.2.8.1.106.86 | Scalarg3stamediaGatewayStatus74 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus73. |
| 1.3.6.1.4.1.6889.2.8.1.106.87 | Scalarg3stamediaGatewayStatus75 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus73. |
| 1.3.6.1.4.1.6889.2.8.1.106.88 | Scalarg3stamediaGatewayStatus76 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus73. |
| 1.3.6.1.4.1.6889.2.8.1.106.89 | Scalarg3stamediaGatewayStatus77 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus73. |
| 1.3.6.1.4.1.6889.2.8.1.106.90 | Scalarg3stamediaGatewayStatus78 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus73. |
| 1.3.6.1.4.1.6889.2.8.1.106.91 | Scalarg3stamediaGatewayStatus79 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus73. |
| 1.3.6.1.4.1.6889.2.8.1.106.92 | Scalarg3stamediaGatewayStatus80 | read-only | mandatory | See DESCRIPTION of g3stamediaGatewayStatus73. |
| 1.3.6.1.4.1.6889.2.8.1.107 | Nodeg3stamgann | |||
| 1.3.6.1.4.1.6889.2.8.1.107.1 | Scalarg3stamgannTage | read-only | mandatory | The number of timeticks since the mg-announcment data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamgannintvl obje… |
| 1.3.6.1.4.1.6889.2.8.1.107.2 | Scalarg3stamgannTintvl | read-write | mandatory | An object containing the interval for which the mg-announcement data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT r… |
| 1.3.6.1.4.1.6889.2.8.1.107.3 | Scalarg3stamgannTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.107.4 | Scalarg3stamgannTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.107.5 | Scalarg3stamgannTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.107.6 | Tableg3stamgannTable | not-accessible | mandatory | A list of g3stamgann entries. |
| 1.3.6.1.4.1.6889.2.8.1.107.6.1 | Rowg3stamgannEntry | not-accessible | mandatory | A g3stamgann entry containing objects of the g3stamgann information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.107.6.1.1 | Columng3stamgannGatewayNbr | read-only | mandatory | An object containing the media gateway number of a G700 media gateway that has the virtual VAL board administered in the V9 slot. |
| 1.3.6.1.4.1.6889.2.8.1.107.6.1.2 | Columng3stamgannAnnActive | read-only | mandatory | An object containing the status of the administered virtual VAL board functionality in the Auser maintenance table. The status is active, either yes or no. |
| 1.3.6.1.4.1.6889.2.8.1.108 | Nodeg3ipserver | |||
| 1.3.6.1.4.1.6889.2.8.1.108.1 | Scalarg3ipserverTage | read-only | mandatory | The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3gatewayTintvl object allows the Netw… |
| 1.3.6.1.4.1.6889.2.8.1.108.2 | Scalarg3ipserverTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.108.3 | Scalarg3ipserverTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.108.4 | Scalarg3ipserverTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.108.5 | Scalarg3ipserverTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.108.6 | Tableg3ipserverTable | not-accessible | mandatory | A list of g3ipserver entries. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1 | Rowg3ipserverEntry | not-accessible | mandatory | A g3ipserver entry containing objects of the g3ipserver information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.1 | Columng3ipserverPortNetwork | read-only | mandatory | An object containing the port network number where the ipserver interfaces are inserted |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.2 | Columng3ipserverSocketEncr | read-only | mandatory | An object containing the state of socket encryption for the Server Interface Module (SIM) interface between the server and the IPSI board. Values are y(es) and… |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.3 | Columng3ipserverSecServer | read-only | mandatory | An object containing an indicator as to whether or not a duplicated (secondary) ipserver interface (IPSI) board is administered within a port network. This is … |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.4 | Columng3ipserverPrimLocation | read-only | mandatory | An object containing the IPSI A Board Location. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.5 | Columng3ipserverPrimHost | read-only | mandatory | An object containing the IPSI A host name. This field is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.6 | Columng3ipserverPrimDHCPID | read-only | mandatory | An object containing the IPSI A DHCP ID. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.7 | Columng3ipserverPrimIP1 | read-only | mandatory | An object containing the IPSI A IP address - segment 1. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.8 | Columng3ipserverPrimIP2 | read-only | mandatory | An object containing the IPSI A IP address - segment 2. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.9 | Columng3ipserverPrimIP3 | read-only | mandatory | An object containing the IPSI A IP address - segment 3. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.10 | Columng3ipserverPrimIP4 | read-only | mandatory | An object containing the IPSI A IP address - segment 4. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.11 | Columng3ipserverPrimIPPort | read-only | mandatory | An object containing the IPSI A IP port number. This is now an obsolete field. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.12 | Columng3ipserverPrimServState | read-only | mandatory | An object containing the IPSI A Service State. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.13 | Columng3ipserverPrimCntlState | read-only | mandatory | An object containing the IPSI A Control State. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.14 | Columng3ipserverPrimStHealth | read-only | mandatory | An object containing the IPSI A State Of Health. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.15 | Columng3ipserverSecLocation | read-only | mandatory | An object containing the IPSI B Board Location. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.16 | Columng3ipserverSecHost | read-only | mandatory | An object containing the IPSI B Host Name. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.17 | Columng3ipserverSecDHCPID | read-only | mandatory | An object containing the IPSI B DCHP ID. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.18 | Columng3ipserverSecIP1 | read-only | mandatory | An object containing the IPSI B IP Address - segment 1. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.19 | Columng3ipserverSecIP2 | read-only | mandatory | An object containing the IPSI B IP Address - segment 2. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.20 | Columng3ipserverSecIP3 | read-only | mandatory | An object containing the IPSI B IP Address - segment 3. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.21 | Columng3ipserverSecIP4 | read-only | mandatory | An object containing the IPSI B IP Address - segment 4 . |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.22 | Columng3ipserverSecIPPort | read-only | mandatory | An object containing the IPSI B IP port number. This field is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.23 | Columng3ipserverSecServState | read-only | mandatory | An object containing the IPSI B Service State |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.24 | Columng3ipserverSecCntlState | read-only | mandatory | An object containing the IPSI B Control State. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.25 | Columng3ipserverSecStHealth | read-only | mandatory | An object containing the IPSI B State Of Health. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.26 | Columng3ipserverCallCntl802 | read-only | mandatory | An object containing the call control (signaling) 802.1p value for the IPSI board. Default is 6, with a range of 0 to 7. This field is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.1.108.6.1.27 | Columng3ipserverCallCntlDiff | read-only | mandatory | An object containing the call control (signaling) DiffServ value for the IPSI board. Default is 40, with a range of 0 to 63. This field is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.1.109 | Nodeg3regipstat | |||
| 1.3.6.1.4.1.6889.2.8.1.109.1 | Scalarg3regipstatTage | read-only | mandatory | The number of timeticks since the registered ip stations data was last extracted from the switch by the Proxy Agent. This object along with the g3regipstatintv… |
| 1.3.6.1.4.1.6889.2.8.1.109.2 | Scalarg3regipstatTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.109.3 | Scalarg3regipstatTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.109.4 | Scalarg3regipstatTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.109.5 | Scalarg3regipstatTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.109.6 | Tableg3regipstatTable | not-accessible | mandatory | A list of g3regipstat entries. |
| 1.3.6.1.4.1.6889.2.8.1.109.6.1 | Rowg3regipstatEntry | not-accessible | mandatory | A g3regipstat entry containing objects of the g3regipstat information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.109.6.1.1 | Columng3regipstatExtension | read-only | mandatory | An object containing the registered IP station extension. This MIB group is currently disabled in providing this data due to performance problems in running th… |
| 1.3.6.1.4.1.6889.2.8.1.110 | Nodeg3callratedata | |||
| 1.3.6.1.4.1.6889.2.8.1.110.1 | Scalarg3callratedataTage | read-only | mandatory | The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratedataTintvl object … |
| 1.3.6.1.4.1.6889.2.8.1.110.2 | Scalarg3callratedataTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.110.3 | Scalarg3callratedataTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.110.4 | Scalarg3callratedataTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.110.5 | Scalarg3callratedataRunYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.110.6 | Scalarg3callratedataRunMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.110.7 | Scalarg3callratedataRunDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.110.8 | Scalarg3callratedataRunHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.110.9 | Scalarg3callratedataMeasHour | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.110.10 | Scalarg3callratedataNumCalls | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. |
| 1.3.6.1.4.1.6889.2.8.1.110.11 | Scalarg3callratedataBsyIntHr | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.110.12 | Scalarg3callratedataBsyIntMn | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.110.13 | Scalarg3callratedataBsyIntSc | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.110.14 | Scalarg3callratedataBsyCalCmpl | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval. |
| 1.3.6.1.4.1.6889.2.8.1.110.15 | Scalarg3callratedataMeasHour2 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded. |
| 1.3.6.1.4.1.6889.2.8.1.110.16 | Scalarg3callratedataNumCallsToday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.110.17 | Scalarg3callratedataBsyIntHrToday | read-only | mandatory | An object containing today's busiest hour.This is the hour with the largest number of completed calls |
| 1.3.6.1.4.1.6889.2.8.1.110.18 | Scalarg3callratedataBsyIntMnToday | read-only | mandatory | An object containing the minute field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.110.19 | Scalarg3callratedataBsyIntScToday | read-only | mandatory | An object containing the second field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.110.20 | Scalarg3callratedataBsyCalCmplToday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.110.21 | Scalarg3callratedataMeasHour3 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.110.22 | Scalarg3callratedataNumCallsToday1 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.110.23 | Scalarg3callratedataBsyIntTodayHr | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.110.24 | Scalarg3callratedataBsyIntTodayMn | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.110.25 | Scalarg3callratedataBsyIntTodaySc | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.110.26 | Scalarg3callratedataBsyCalCmplToday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.110.27 | Scalarg3callratedataMeasHour4 | read-only | mandatory | An object containing the starting time (using 24-hour clock)of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.110.28 | Scalarg3callratedataNumCallsToday3 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.110.29 | Scalarg3callratedataBsyIntHrYesterday | read-only | mandatory | An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls |
| 1.3.6.1.4.1.6889.2.8.1.110.30 | Scalarg3callratedataBsyIntMnYesterday | read-only | mandatory | An object containing the minute field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.110.31 | Scalarg3callratedataBsyIntScYesterday | read-only | mandatory | An object containing the second field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.110.32 | Scalarg3callratedataBsyCalCmplYesterday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.110.33 | Scalarg3callratedataMeasHour5 | read-only | mandatory | An object containing the starting time (using 24-hour clock)of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.110.34 | Scalarg3callratedataNumCallsYesterday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.110.35 | Scalarg3callratedataBsyIntHrYesterday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for yesterday |
| 1.3.6.1.4.1.6889.2.8.1.110.36 | Scalarg3callratedataBsyIntMnYesterday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for yesterday |
| 1.3.6.1.4.1.6889.2.8.1.110.37 | Scalarg3callratedataBsyIntScYesteday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for yesterday |
| 1.3.6.1.4.1.6889.2.8.1.110.38 | Scalarg3callratedataBsyCalCmplYesterday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.111 | Nodeg3callratevoice | |||
| 1.3.6.1.4.1.6889.2.8.1.111.1 | Scalarg3callratevoiceTage | read-only | mandatory | The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratevoiceTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.111.2 | Scalarg3callratevoiceTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent.When a GET or GET-NEXT request for these … |
| 1.3.6.1.4.1.6889.2.8.1.111.3 | Scalarg3callratevoiceTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.111.4 | Scalarg3callratevoiceTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.111.5 | Scalarg3callratevoiceRunYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.111.6 | Scalarg3callratevoiceRunMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.111.7 | Scalarg3callratevoiceRunDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.111.8 | Scalarg3callratevoiceRunHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.111.9 | Scalarg3callratevoiceMeasHour | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.111.10 | Scalarg3callratevoiceNumCalls | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. |
| 1.3.6.1.4.1.6889.2.8.1.111.11 | Scalarg3callratevoiceBsyIntHr | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.111.12 | Scalarg3callratevoiceBsyIntMn | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.111.13 | Scalarg3callratevoiceBsyIntSc | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.111.14 | Scalarg3callratevoiceBsyCalCmpl | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval. |
| 1.3.6.1.4.1.6889.2.8.1.111.15 | Scalarg3callratevoiceMeasHour2 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded. |
| 1.3.6.1.4.1.6889.2.8.1.111.16 | Scalarg3callratevoiceNumCallsToday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.111.17 | Scalarg3callratevoiceBsyIntHrToday | read-only | mandatory | An object containing today's busiest hour.This is the hour with the largest number of completed calls |
| 1.3.6.1.4.1.6889.2.8.1.111.18 | Scalarg3callratevoiceBsyIntMnToday | read-only | mandatory | An object containing the minute field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.111.19 | Scalarg3callratevoiceBsyIntScToday | read-only | mandatory | An object containing the second field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.111.20 | Scalarg3callratevoiceBsyCalCmplToday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.111.21 | Scalarg3callratevoiceMeasHour3 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.111.22 | Scalarg3callratevoiceNumCallsToday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.111.23 | Scalarg3callratevoiceBsyIntHrToday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.111.24 | Scalarg3callratevoiceBsyIntMnToday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.111.25 | Scalarg3callratevoiceBsyIntScToday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.111.26 | Scalarg3callratevoiceBsyCalCmplToday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.111.27 | Scalarg3callratevoiceMeasHour4 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.111.28 | Scalarg3callratevoiceNumCallsYesterday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.111.29 | Scalarg3callratevoiceBsyIntHrYesterday | read-only | mandatory | An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls. |
| 1.3.6.1.4.1.6889.2.8.1.111.30 | Scalarg3callratevoiceBsyIntMnYesterday | read-only | mandatory | An object containing the minute field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.111.31 | Scalarg3callratevoiceBsyIntScYesterday | read-only | mandatory | An object containing the second field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.111.32 | Scalarg3callratevoiceBsyCalCmplYesterday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.111.33 | Scalarg3callratevoiceMeasHour5 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.111.34 | Scalarg3callratevoiceNumCallsYesterday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.111.35 | Scalarg3callratevoiceBsyIntHrYesterday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for yesterday |
| 1.3.6.1.4.1.6889.2.8.1.111.36 | Scalarg3callratevoiceBsyIntMnYesterday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.111.37 | Scalarg3callratevoiceBsyIntScYesterday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.111.38 | Scalarg3callratevoiceBsyCalCmplYesterday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.112 | Nodeg3callratesrv | |||
| 1.3.6.1.4.1.6889.2.8.1.112.1 | Scalarg3callratesrvTage | read-only | mandatory | The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratesrvTintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.112.2 | Scalarg3callratesrvTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent.When a GET or GET-NEXT request for these … |
| 1.3.6.1.4.1.6889.2.8.1.112.3 | Scalarg3callratesrvTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.112.4 | Scalarg3callratesrvTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.112.5 | Scalarg3callratesrvRunYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.112.6 | Scalarg3callratesrvRunMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.112.7 | Scalarg3callratesrvRunDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.112.8 | Scalarg3callratesrvRunHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.112.9 | Scalarg3callratesrvMeasHour | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.112.10 | Scalarg3callratesrvNumCalls | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. |
| 1.3.6.1.4.1.6889.2.8.1.112.11 | Scalarg3callratesrvBsyIntHr | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.112.12 | Scalarg3callratesrvBsyIntMn | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.112.13 | Scalarg3callratesrvBsyIntSc | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.112.14 | Scalarg3callratesrvBsyCalCmpl | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval. |
| 1.3.6.1.4.1.6889.2.8.1.112.15 | Scalarg3callratesrvMeasHour2 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded. |
| 1.3.6.1.4.1.6889.2.8.1.112.16 | Scalarg3callratesrvNumCallsToday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.112.17 | Scalarg3callratesrvBsyIntHrToday | read-only | mandatory | An object containing today's busiest hour.This is the hour with the largest number of completed calls. |
| 1.3.6.1.4.1.6889.2.8.1.112.18 | Scalarg3callratesrvBsyIntMnToday | read-only | mandatory | An object containing the minute field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.112.19 | Scalarg3callratesrvBsyIntScToday | read-only | mandatory | An object containing the second field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.112.20 | Scalarg3callratesrvBsyCalCmplToday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.112.21 | Scalarg3callratesrvMeasHour3 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.112.22 | Scalarg3callratesrvNumCallsToday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.112.23 | Scalarg3callratesrvBsyIntHrToday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.112.24 | Scalarg3callratesrvBsyIntMnToday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.112.25 | Scalarg3callratesrvBsyIntScToday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.112.26 | Scalarg3callratesrvBsyCalCmplToday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.112.27 | Scalarg3callratesrvMeasHour4 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.112.28 | Scalarg3callratesrvNumCallsYesterday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.112.29 | Scalarg3callratesrvBsyIntHrYesterday | read-only | mandatory | An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls. |
| 1.3.6.1.4.1.6889.2.8.1.112.30 | Scalarg3callratesrvBsyIntMnYesterday | read-only | mandatory | An object containing the minute field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.112.31 | Scalarg3callratesrvBsyIntScYesterday | read-only | mandatory | An object containing the second field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.112.32 | Scalarg3callratesrvBsyCalCmplYesterday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.112.33 | Scalarg3callratesrvMeasHour5 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.112.34 | Scalarg3callratesrvNumCallsYesterday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.112.35 | Scalarg3callratesrvBsyIntHrYesterday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.112.36 | Scalarg3callratesrvBsyIntMnYesterday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.112.37 | Scalarg3callratesrvBsyIntScYesterday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.112.38 | Scalarg3callratesrvBsyCalCmplYesterday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.113 | Nodeg3callratemedia | |||
| 1.3.6.1.4.1.6889.2.8.1.113.1 | Scalarg3callratemediaTage | read-only | mandatory | The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent.This object along with the g3callratemediaTintvl object … |
| 1.3.6.1.4.1.6889.2.8.1.113.2 | Scalarg3callratemediaTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.113.3 | Scalarg3callratemediaTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.113.4 | Scalarg3callratemediaTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.113.5 | Scalarg3callratemediaRunYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.113.6 | Scalarg3callratemediaRunMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.113.7 | Scalarg3callratemediaRunDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.113.8 | Scalarg3callratemediaRunHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.113.9 | Scalarg3callratemediaMeasHour | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.113.10 | Scalarg3callratemediaNumCalls | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. |
| 1.3.6.1.4.1.6889.2.8.1.113.11 | Scalarg3callratemediaBsyIntHr | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.113.12 | Scalarg3callratemediaBsyIntMn | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.113.13 | Scalarg3callratemediaBsyIntSc | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.113.14 | Scalarg3callratemediaBsyCalCmpl | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval. |
| 1.3.6.1.4.1.6889.2.8.1.113.15 | Scalarg3callratemediaMeasHour2 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded. |
| 1.3.6.1.4.1.6889.2.8.1.113.16 | Scalarg3callratemediaNumCallsToday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.113.17 | Scalarg3callratemediaBsyIntHrToday | read-only | mandatory | An object containing today's busiest hour.This is the hour with the largest number of completed calls. |
| 1.3.6.1.4.1.6889.2.8.1.113.18 | Scalarg3callratemediaBsyIntMnToday | read-only | mandatory | An object containing the minute field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.113.19 | Scalarg3callratemediaBsyIntScToday | read-only | mandatory | An object containing the minute field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.113.20 | Scalarg3callratemediaBsyCalCmplToday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.113.21 | Scalarg3callratemediaMeasHour3 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.113.22 | Scalarg3callratemediaNumCallsToday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.113.23 | Scalarg3callratemediaBsyIntHrToday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.113.24 | Scalarg3callratemediaBsyIntMnToday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.113.25 | Scalarg3callratemediaBsyIntScToday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for today |
| 1.3.6.1.4.1.6889.2.8.1.113.26 | Scalarg3callratemediaBsyCalCmplToday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.113.27 | Scalarg3callratemediaMeasHour4 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.113.28 | Scalarg3callratemediaNumCallsYesterday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.113.29 | Scalarg3callratemediaBsyIntHrYesterday | read-only | mandatory | An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls. |
| 1.3.6.1.4.1.6889.2.8.1.113.30 | Scalarg3callratemediaBsyIntMnYesterday | read-only | mandatory | An object containing the minute field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.113.31 | Scalarg3callratemediaBsyIntScYesterday | read-only | mandatory | An object containing the second field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.113.32 | Scalarg3callratemediaBsyCalCmplYesterday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.113.33 | Scalarg3callratemediaMeasHour5 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.113.34 | Scalarg3callratemediaNumCallsYesterday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.113.35 | Scalarg3callratemediaBsyIntHrYesterday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for yesterday |
| 1.3.6.1.4.1.6889.2.8.1.113.36 | Scalarg3callratemediaBsyIntMnYesterday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for yesterday |
| 1.3.6.1.4.1.6889.2.8.1.113.37 | Scalarg3callratemediaBsyIntScYesterday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for yesterday |
| 1.3.6.1.4.1.6889.2.8.1.113.38 | Scalarg3callratemediaBsyCalCmplYesterday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.114 | Nodeg3callratetotal | |||
| 1.3.6.1.4.1.6889.2.8.1.114.1 | Scalarg3callratetotalTage | read-only | mandatory | The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent.This object along with the g3callratedataTintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.114.2 | Scalarg3callratetotalTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.114.3 | Scalarg3callratetotalTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.114.4 | Scalarg3callratetotalTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.114.5 | Scalarg3callratetotalRunYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.114.6 | Scalarg3callratetotalRunMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.114.7 | Scalarg3callratetotalRunDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.114.8 | Scalarg3callratetotalRunHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.114.9 | Scalarg3callratetotalMeasHour | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.114.10 | Scalarg3callratetotalNumCalls | read-only | mandatory | The number of calls completed or answered (including incoming, outgoing, and intercom),during the listed hour. |
| 1.3.6.1.4.1.6889.2.8.1.114.11 | Scalarg3callratetotalBsyIntHr | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.114.12 | Scalarg3callratetotalBsyIntMn | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.114.13 | Scalarg3callratetotalBsyIntSc | read-only | mandatory | An object containing |
| 1.3.6.1.4.1.6889.2.8.1.114.14 | Scalarg3callratetotalBsyCalCmpl | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval. |
| 1.3.6.1.4.1.6889.2.8.1.114.15 | Scalarg3callratetotalMeasHour2 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded. |
| 1.3.6.1.4.1.6889.2.8.1.114.16 | Scalarg3callratetotalNumCallsToday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.114.17 | Scalarg3callratetotalBsyIntHrToday | read-only | mandatory | An object containing today's busiest hour.This is the hour with the largest number of completed calls. |
| 1.3.6.1.4.1.6889.2.8.1.114.18 | Scalarg3callratetotalBsyIntMnToday | read-only | mandatory | An object containing the minute field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.114.19 | Scalarg3callratetotalBsyIntScToday | read-only | mandatory | An object containing the second field of today's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.114.20 | Scalarg3callratetotalBsyCalCmplToday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.114.21 | Scalarg3callratetotalMeasHour3 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.114.22 | Scalarg3callratetotalNumCallsToday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.114.23 | Scalarg3callratetotalBsyIntHrToday2 | read-only | mandatory | An object containing the hour field of the hour with the busiest 36-second interval for today. |
| 1.3.6.1.4.1.6889.2.8.1.114.24 | Scalarg3callratetotalBsyIntMnToday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for today. |
| 1.3.6.1.4.1.6889.2.8.1.114.25 | Scalarg3callratetotalBsyIntScToday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for today. |
| 1.3.6.1.4.1.6889.2.8.1.114.26 | Scalarg3callratetotalBsyCalCmplToday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.114.27 | Scalarg3callratetotalMeasHour4 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.114.28 | Scalarg3callratetotalNumCallsYesterday | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.114.29 | Scalarg3callratetotalBsyIntHrYesterday | read-only | mandatory | An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls. |
| 1.3.6.1.4.1.6889.2.8.1.114.30 | Scalarg3callratetotalBsyIntMnYesterday | read-only | mandatory | An object containing the minute field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.114.31 | Scalarg3callratetotalBsyIntScYesterday | read-only | mandatory | An object containing the second field of yesterday's busiest hour |
| 1.3.6.1.4.1.6889.2.8.1.114.32 | Scalarg3callratetotalBsyCalCmplYesterday | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.114.33 | Scalarg3callratetotalMeasHour5 | read-only | mandatory | An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded |
| 1.3.6.1.4.1.6889.2.8.1.114.34 | Scalarg3callratetotalNumCallsYesterday2 | read-only | mandatory | The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour |
| 1.3.6.1.4.1.6889.2.8.1.114.35 | Scalarg3callratetotalBsyIntHrYesterday2 | read-only | mandatory | An object containing the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.114.36 | Scalarg3callratetotalBsyIntMnYesterday2 | read-only | mandatory | An object containing the minute field of the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.114.37 | Scalarg3callratetotalBsyIntScYesterday2 | read-only | mandatory | An object containing the second field of the hour with the busiest 36-second interval for yesterday. |
| 1.3.6.1.4.1.6889.2.8.1.114.38 | Scalarg3callratetotalBsyCalCmplYesterday2 | read-only | mandatory | An object containing the total number of calls completed in the listed busy interval |
| 1.3.6.1.4.1.6889.2.8.1.115 | Nodeg3clansocsum | |||
| 1.3.6.1.4.1.6889.2.8.1.115.1 | Scalarg3clansocsumTage | read-only | mandatory | The number of timeticks since the clan sockets summary data was last extracted from the switch by the Proxy Agent.This object along with the g3clansocsumTintvl… |
| 1.3.6.1.4.1.6889.2.8.1.115.2 | Scalarg3clansocsumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.115.3 | Scalarg3clansocsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.115.4 | Scalarg3clansocsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.115.5 | Scalarg3clansocsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.115.6 | Tableg3clansocsumTable | not-accessible | mandatory | A list of g3clansocsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1 | Rowg3clansocsumEntry | not-accessible | mandatory | A g3clansocsum entry containing objects of the g3clansocsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.1 | Columng3clansocsumBoard | read-only | mandatory | An object containing the cabinet, carrier, and slot for the specified board |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.2 | Columng3clansocsumMeasHour | read-only | mandatory | An object containing the hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.3 | Columng3clansocsumYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.4 | Columng3clansocsumMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.5 | Columng3clansocsumDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.6 | Columng3clansocsumHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.7 | Columng3clansocsumRegion | read-only | mandatory | An object containing the network region that the CLAN for this measurement is in. Range: 1-44 |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.8 | Columng3clansocsumSockusage | read-only | mandatory | An object containing the total time, in Erlangs, that is available from sockets on this C-lan board. Calculated by: (Total Socket Seconds of usage) / 3600. Ran… |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.9 | Columng3clansocsumSockPeg | read-only | mandatory | An object containing the total number of times a C-lan socket on the board was allocated to a call or link. Range: 0-65535 |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.10 | Columng3clansocsumDenialPeg | read-only | mandatory | An object containing the total number of times a C-lan socket on the board was needed for a call or link, but was not available. Range: 0-65535 |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.11 | Columng3clansocsumPctDenial | read-only | mandatory | An object containing (Socket Denial peg)/(Socket Denial peg + Socket peg). Range: 0-99 |
| 1.3.6.1.4.1.6889.2.8.1.115.6.1.12 | Columng3clansocsumPcttmASB | read-only | mandatory | An object containing the percentage of time during the measured interval that all C-lan sockets on the board were unavailable for use. Range: 0-99 |
| 1.3.6.1.4.1.6889.2.8.1.116 | Nodeg3pkclansocsum | |||
| 1.3.6.1.4.1.6889.2.8.1.116.1 | Scalarg3pkclansocsumTage | read-only | mandatory | The number of timeticks since the clan sockets summary data was last extracted from the switch by the Proxy Agent. This object along with the g3clansumintvl ob… |
| 1.3.6.1.4.1.6889.2.8.1.116.2 | Scalarg3pkclansocsumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.116.3 | Scalarg3pkclansocsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.116.4 | Scalarg3pkclansocsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.116.5 | Scalarg3pkclansocsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.116.6 | Tableg3pkclansocsumTable | not-accessible | mandatory | A list of g3pkclansocsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1 | Rowg3pkclansocsumEntry | not-accessible | mandatory | A g3pkclansocsum entry containing objects of the g3pkclansocsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.1 | Columng3pkclansocsumBoard | read-only | mandatory | An object containing the cabinet, carrier, and slot for the specified board |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.2 | Columng3pkclansocsumMeasHour | read-only | mandatory | An object containing the hour the measurement was taken |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.3 | Columng3pkclansocsumYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.4 | Columng3pkclansocsumMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.5 | Columng3pkclansocsumDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.6 | Columng3pkclansocsumHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.7 | Columng3pkclansocsumRegion | read-only | mandatory | An object containing the network region that the CLAN for this measurement is in. Range: 1-44 |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.8 | Columng3pkclansocsumSockusage | read-only | mandatory | An object containing the total time, in Erlangs, that is available from sockets on this C-lan board. Calculated by: (Total Socket Seconds of usage) / 3600. Ran… |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.9 | Columng3pkclansocsumSockPeg | read-only | mandatory | An object containing the total number of times a C-lan socket on the board was allocated to a call or link. Range: 0-65535 |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.10 | Columng3pkclansocsumDenialPeg | read-only | mandatory | An object containing the total number of times a C-lan socket on the board was needed for a call or link, but was not available. Range: 0-65535 |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.11 | Columng3pkclansocsumPctDenial | read-only | mandatory | An object containing (Socket Denial peg)/(Socket Denial peg + Socket peg). Range: 0-99 |
| 1.3.6.1.4.1.6889.2.8.1.116.6.1.12 | Columng3pkclansocsumPcttmASB | read-only | mandatory | An object containing the percentage of time during the measured interval that all C-lan sockets on the board were unavailable for use. Range: 0-99 |
| 1.3.6.1.4.1.6889.2.8.1.117 | Nodeg3clanether | |||
| 1.3.6.1.4.1.6889.2.8.1.117.1 | Scalarg3clanetherTage | read-only | mandatory | The number of timeticks since the clan ethernet data was last extracted from the switch by the Proxy Agent.This object along with the g3clanetherTintvl object … |
| 1.3.6.1.4.1.6889.2.8.1.117.2 | Scalarg3clanetherTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.117.3 | Scalarg3clanetherTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.117.4 | Scalarg3clanetherTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.117.5 | Scalarg3clanetherTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.117.6 | Tableg3clanetherTable | not-accessible | mandatory | A list of g3clanether entries. |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1 | Rowg3clanetherEntry | not-accessible | mandatory | A g3clanether entry containing objects of the g3clanether information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.1 | Columng3clanetherKey | read-only | mandatory | An object containing the index key |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.2 | Columng3clanetherYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.3 | Columng3clanetherMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.4 | Columng3clanetherDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.5 | Columng3clanetherHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.6 | Columng3clanetherDate | read-only | mandatory | An object containing the date that the data was collected |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.7 | Columng3clanetherTime | read-only | mandatory | An object containing the current 15-minute interval in which the action was performed |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.8 | Columng3clanetherCrcChkTot | read-only | mandatory | An object containing the total error count for CRC errors |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.9 | Columng3clanetherCrcChkDelta | read-only | mandatory | An object containing the difference between the current and the previous sample for CRC errors |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.10 | Columng3clanetherCollCntTot | read-only | mandatory | An object containing the error count for collisions on the ethernet |
| 1.3.6.1.4.1.6889.2.8.1.117.6.1.11 | Columng3clanetherCollCntDelta | read-only | mandatory | An object containing the difference between the current and previous samples for the error count for collisions on the ethernet |
| 1.3.6.1.4.1.6889.2.8.1.118 | Nodeg3clanppp | |||
| 1.3.6.1.4.1.6889.2.8.1.118.1 | Scalarg3clanpppTage | read-only | mandatory | The number of timeticks since the clan ppp data was last extracted from the switch by the Proxy Agent. This object along with the g3clanpppTintvl object allows… |
| 1.3.6.1.4.1.6889.2.8.1.118.2 | Scalarg3clanpppTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.118.3 | Scalarg3clanpppTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.118.4 | Scalarg3clanpppTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.118.5 | Scalarg3clanpppTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.118.6 | Tableg3clanpppTable | not-accessible | mandatory | A list of g3clanppp entries. |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1 | Rowg3clanpppEntry | not-accessible | mandatory | A g3clanppp entry containing objects of the g3clanppp information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.1 | Columng3clanpppKey | read-only | mandatory | An object containing the index key |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.2 | Columng3clanpppYear | read-only | mandatory | An object containing the Year the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.3 | Columng3clanpppMonth | read-only | mandatory | An object containing the Month the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.4 | Columng3clanpppDay | read-only | mandatory | An object containing the Day the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.5 | Columng3clanpppHour | read-only | mandatory | An object containing the Hour the command was executed |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.6 | Columng3clanpppDate | read-only | mandatory | An object containing the date that the data was collected |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.7 | Columng3clanpppTime | read-only | mandatory | An object containing the current 15-minute interval in which the action was performed |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.8 | Columng3clanpppCrcChkTot | read-only | mandatory | An object containing the total error count for CRC errors |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.9 | Columng3clanpppCrcChkDelta | read-only | mandatory | An object containing the difference between the current and the previous sample for CRC errors |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.10 | Columng3clanpppInvFrameTot | read-only | mandatory | An object containing the total number of invalid frames detected. Invalid frames are the frames that are misaligned. |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.11 | Columng3clanpppInvFrameDelta | read-only | mandatory | An object containing the difference between the Invalid frames count between the current and previous samples for Invalid frames count |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.12 | Columng3clanpppChapFailTot | read-only | mandatory | An object containing the total number of failed attempts for ppp authentication |
| 1.3.6.1.4.1.6889.2.8.1.118.6.1.13 | Columng3clanpppChapFailDelta | read-only | mandatory | An object containing the difference betwen the current and previous sample for number of failed |
| 1.3.6.1.4.1.6889.2.8.1.119 | Nodeg3mmisum | |||
| 1.3.6.1.4.1.6889.2.8.1.119.1 | Scalarg3mmisumTage | read-only | mandatory | The number of timeticks since the hourly multimedia interface traffic (MMI) summary data was last extracted from the switch by the Proxy Agent. This object alo… |
| 1.3.6.1.4.1.6889.2.8.1.119.2 | Scalarg3mmisumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.119.3 | Scalarg3mmisumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.119.4 | Scalarg3mmisumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.119.5 | Scalarg3mmisumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.119.6 | Tableg3mmisumTable | not-accessible | mandatory | A list of g3mmisum entries. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1 | Rowg3mmisumEntry | not-accessible | mandatory | A g3mmisum entry containing objects of the g3mmisum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.1 | Columng3mmisumMeasHour | read-only | mandatory | An object containing the hour for which these measurements apply (based on a 24-hour clock). |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.2 | Columng3mmisumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.3 | Columng3mmisumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.4 | Columng3mmisumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.5 | Columng3mmisumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.6 | Columng3mmisumAvailablePorts | read-only | mandatory | An object containing the total network MMI ports in the system (does not include any MMIs that are cabled to an ESM). |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.7 | Columng3mmisumAvailableUsage | read-only | mandatory | An object containing the total time that is available in the system for network MMI ports (in CCS units). |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.8 | Columng3mmisumTotalUsage | read-only | mandatory | An object containing the total time, in CCS units, that MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance b… |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.9 | Columng3mmisumTotalAllocation | read-only | mandatory | An object containing the total number of times that an MMI port was allocated to a call. Keep in mind that a 2-channel call occupies 2 ports, so this number do… |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.10 | Columng3mmisumMMIDenials | read-only | mandatory | An object containing the total number of times an MMI port was needed but could not be allocated because all ports were busy. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.11 | Columng3mmisumOutofService | read-only | mandatory | An object containing the total time, in CCS units, that any MMI ports were out of service during any part of the measured interval. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.12 | Columng3mmisumPercentAPB | read-only | mandatory | An object containing the percentage of time during the measured interval that all MMI ports are unavailable to carry a new call. |
| 1.3.6.1.4.1.6889.2.8.1.119.6.1.13 | Columng3mmisumPercentBlock | read-only | mandatory | An object containing the percentage of attempted allocations of MMI ports that are not successful (calculated as percent blockage = (MMI Denials/(Total Alloc +… |
| 1.3.6.1.4.1.6889.2.8.1.120 | Nodeg3pkmmisum | |||
| 1.3.6.1.4.1.6889.2.8.1.120.1 | Scalarg3pkmmisumTage | read-only | mandatory | The number of timeticks since the peak multimedia interface traffic (MMI) summary data was last extracted from the switch by the Proxy Agent. This object along… |
| 1.3.6.1.4.1.6889.2.8.1.120.2 | Scalarg3pkmmisumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.120.3 | Scalarg3pkmmisumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.120.4 | Scalarg3pkmmisumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.120.5 | Scalarg3pkmmisumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.120.6 | Tableg3pkmmisumTable | not-accessible | mandatory | A list of g3pkmmisum entries. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1 | Rowg3pkmmisumEntry | not-accessible | mandatory | A g3pkmmisum entry containing objects of the g3pkmmisum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.1 | Columng3pkmmisumMeasHour | read-only | mandatory | An object containing the hour for which these measurements apply (based on a 24-hour clock). |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.2 | Columng3pkmmisumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.3 | Columng3pkmmisumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.4 | Columng3pkmmisumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.5 | Columng3pkmmisumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.6 | Columng3pkmmisumAvailablePorts | read-only | mandatory | An object containing the total network MMI ports in the system (does not include any MMIs that are cabled to an ESM). |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.7 | Columng3pkmmisumAvailableUsage | read-only | mandatory | An object containing the total time that is available in the system for network MMI ports (in CCS units). |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.8 | Columng3pkmmisumTotalUsage | read-only | mandatory | An object containing the total time, in CCS units, that MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance b… |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.9 | Columng3pkmmisumTotalAllocation | read-only | mandatory | An object containing the total number of times that an MMI port was allocated to a call. Keep in mind that a 2-channel call occupies 2 ports, so this number do… |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.10 | Columng3pkmmisumMMIDenials | read-only | mandatory | An object containing the total number of times an MMI port was needed but could not be allocated because all ports were busy. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.11 | Columng3pkmmisumOutofService | read-only | mandatory | An object containing the total time, in CCS units, that any MMI ports were out of service during any part of the measured interval. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.12 | Columng3pkmmisumPercentAPB | read-only | mandatory | An object containing the percentage of time during the measured interval that all MMI ports are unavailable to carry a new call. |
| 1.3.6.1.4.1.6889.2.8.1.120.6.1.13 | Columng3pkmmisumPercentBlock | read-only | mandatory | An object containing the percentage of attempted allocations of MMI ports that are not successful (calculated as percent blockage = (MMI Denials/(Total Alloc +… |
| 1.3.6.1.4.1.6889.2.8.1.121 | Nodeg3esmsum | |||
| 1.3.6.1.4.1.6889.2.8.1.121.1 | Scalarg3esmsumTage | read-only | mandatory | The number of timeticks since the hourly expansion services module (ESM) summary data was last extracted from the switch by the Proxy Agent.This object along w… |
| 1.3.6.1.4.1.6889.2.8.1.121.2 | Scalarg3esmsumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.121.3 | Scalarg3esmsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.121.4 | Scalarg3esmsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.121.5 | Scalarg3esmsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.121.6 | Tableg3esmsumTable | not-accessible | mandatory | A list of g3esmsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1 | Rowg3esmsumEntry | not-accessible | mandatory | A g3esmsum entry containing objects of the g3esmsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.1 | Columng3esmsumMeasHour | read-only | mandatory | An object containing the hour for which these measurements apply (based on a 24-hour clock). |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.2 | Columng3esmsumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.3 | Columng3esmsumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.4 | Columng3esmsumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.5 | Columng3esmsumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.6 | Columng3esmsumAvailablePorts | read-only | mandatory | An object containing the total network ESM-MMI ports in the system. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.7 | Columng3esmsumAvailableUsage | read-only | mandatory | An object containing the total time that is available in the system for network ESM-MMI ports (in CCS units). |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.8 | Columng3esmsumTotalUsage | read-only | mandatory | An object containing the total time, in CCS units, that ESM-MMI ports are in use on a call. It includes the time that the ports are out of service or maintenan… |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.9 | Columng3esmsumTotalAllocation | read-only | mandatory | An object containing the total number of times that an ESM-MMI port was allocated to a call. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.10 | Columng3esmsumESMDenials | read-only | mandatory | An object containing the total number of times an ESM-MMI port was needed but could not be allocated because all ports were busy. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.11 | Columng3esmsumOutofService | read-only | mandatory | An object containing the total time, in CCS units, that any ESM-MMI ports were out of service during any part of the measured interval. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.12 | Columng3esmsumPercentAPB | read-only | mandatory | An object containing the percentage of time during the measured interval that all ESM-MMI ports are unavailable to carry a new call. |
| 1.3.6.1.4.1.6889.2.8.1.121.6.1.13 | Columng3esmsumPercentBlock | read-only | mandatory | An object containing the percentage of attempted allocations of ESM-MMI ports that are not successful (calculated as percent blockage = ((ESM Denials/(Total Al… |
| 1.3.6.1.4.1.6889.2.8.1.122 | Nodeg3pkesmsum | |||
| 1.3.6.1.4.1.6889.2.8.1.122.1 | Scalarg3pkesmsumTage | read-only | mandatory | The number of timeticks since the peak expansion services module (ESM) summary data was last extracted from the switch by the Proxy Agent.This object along wit… |
| 1.3.6.1.4.1.6889.2.8.1.122.2 | Scalarg3pkesmsumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.122.3 | Scalarg3pkesmsumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.122.4 | Scalarg3pkesmsumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.122.5 | Scalarg3pkesmsumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.122.6 | Tableg3pkesmsumTable | not-accessible | mandatory | A list of g3pkesmsum entries. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1 | Rowg3pkesmsumEntry | not-accessible | mandatory | A g3pkesmsum entry containing objects of the g3pkesmsum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.1 | Columng3pkesmsumMeasHour | read-only | mandatory | An object containing the hour for which these measurements apply (based on a 24-hour clock). |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.2 | Columng3pkesmsumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.3 | Columng3pkesmsumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.4 | Columng3pkesmsumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.5 | Columng3pkesmsumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.6 | Columng3pkesmsumAvailablePorts | read-only | mandatory | An object containing the total network ESM-MMI ports in the system. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.7 | Columng3pkesmsumAvailableUsage | read-only | mandatory | An object containing the total time that is available in the system for network ESM-MMI ports (in CCS units). |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.8 | Columng3pkesmsumTotalUsage | read-only | mandatory | An object containing the total time, in CCS units, that ESM-MMI ports are in use on a call. It includes the time that the ports are out of service or maintenan… |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.9 | Columng3pkesmsumTotalAllocation | read-only | mandatory | An object containing the total number of times that an ESM-MMI port was allocated to a call. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.10 | Columng3pkesmsumESMDenials | read-only | mandatory | An object containing the total number of times an ESM-MMI port was needed but could not be allocated because all ports were busy. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.11 | Columng3pkesmsumOutofService | read-only | mandatory | An object containing the total time, in CCS units, that any ESM-MMI ports were out of service during any part of the measured interval. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.12 | Columng3pkesmsumPercentAPB | read-only | mandatory | An object containing the percentage of time during the measured interval that all ESM-MMI ports are unavailable to carry a new call. |
| 1.3.6.1.4.1.6889.2.8.1.122.6.1.13 | Columng3pkesmsumPercentBlock | read-only | mandatory | An object containing the percentage of attempted allocations of ESM-MMI ports that are not successful (calculated as percent blockage = ((ESM Denials/(Total Al… |
| 1.3.6.1.4.1.6889.2.8.1.123 | Nodeg3voicesum | |||
| 1.3.6.1.4.1.6889.2.8.1.123.1 | Scalarg3voicesumTage | read-only | mandatory | The number of timeticks since the hourly voice conditioner (VC) summary data was last extracted from the switch by the Proxy Agent.This object along with the g… |
| 1.3.6.1.4.1.6889.2.8.1.123.2 | Scalarg3voicesumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.123.3 | Scalarg3voicesumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.123.4 | Scalarg3voicesumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.123.5 | Scalarg3voicesumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.123.6 | Tableg3voicesumTable | not-accessible | mandatory | A list of g3voicesum entries. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1 | Rowg3voicesumEntry | not-accessible | mandatory | A g3voicesum entry containing objects of the g3voicesum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.1 | Columng3voicesumMeasHour | read-only | mandatory | An object containing the hour for which these measurements apply (based on a 24-hour clock). |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.2 | Columng3voicesumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.3 | Columng3voicesumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.4 | Columng3voicesumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.5 | Columng3voicesumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.6 | Columng3voicesumAvailablePorts | read-only | mandatory | An object containing the total number of VC ports in the system. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.7 | Columng3voicesumAvailableUsage | read-only | mandatory | An object containing the total time, in CCS units, that all VC ports are available in the system (calculated as number of MMI ports * 36). |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.8 | Columng3voicesumH320Usage | read-only | mandatory | An object containing the total time that VC ports are allocated to H320 endpoints. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.9 | Columng3voicesumVoiceUsage | read-only | mandatory | An object containing the total time that VC ports are allocated to voice endpoints. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.10 | Columng3voicesumTotalUsage | read-only | mandatory | An object containing the total time, in CCS units, that VC ports are unavailable to carry a new call. This includes time that the ports are busy on a call, out… |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.11 | Columng3voicesumH320Allocation | read-only | mandatory | An object containing the total number of times a VC port was allocated to a H320 call. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.12 | Columng3voicesumVoiceAllocation | read-only | mandatory | An object containing the total number of times a VC port was allocated to a voice call. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.13 | Columng3voicesumTotalAllocation | read-only | mandatory | An object containing the total number of times a VC port was allocated to any call. Each B-channel used on a multimedia call counts as one allocation. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.14 | Columng3voicesumH320Denials | read-only | mandatory | An object containing the number of times a port was needed for an H320 call, but was not available. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.15 | Columng3voicesumVoiceDenials | read-only | mandatory | An object containing the number of times a port was need for a voice call, but was not available. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.16 | Columng3voicesumTotalDenials | read-only | mandatory | An object containing the total number of times a VC port was needed for any call, but was not allocated because all VC ports were busy. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.17 | Columng3voicesumOutofService | read-only | mandatory | An object containing the total time, in CCS units, that any VC ports were out of service during any part of the measured interval. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.18 | Columng3voicesumPercentAPB | read-only | mandatory | An object containing the percentage of time during the measured interval that all VC ports are unavailable to carry a new call. |
| 1.3.6.1.4.1.6889.2.8.1.123.6.1.19 | Columng3voicesumPercentBlock | read-only | mandatory | An object containing the percentage of attempted allocations of VC ports that are not successful. This value is calculated as percent blockage = ((Total VC Den… |
| 1.3.6.1.4.1.6889.2.8.1.124 | Nodeg3pkvoicesum | |||
| 1.3.6.1.4.1.6889.2.8.1.124.1 | Scalarg3pkvoicesumTage | read-only | mandatory | The number of timeticks since the peak voice conditioner (VC) summary data was last extracted from the switch by the Proxy Agent.This object along with the g3p… |
| 1.3.6.1.4.1.6889.2.8.1.124.2 | Scalarg3pkvoicesumTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.124.3 | Scalarg3pkvoicesumTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.124.4 | Scalarg3pkvoicesumTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.124.5 | Scalarg3pkvoicesumTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.124.6 | Tableg3pkvoicesumTable | not-accessible | mandatory | A list of g3pkvoicesum entries. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1 | Rowg3pkvoicesumEntry | not-accessible | mandatory | A g3pkvoicesum entry containing objects of the g3pkvoicesum information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.1 | Columng3pkvoicesumMeasHour | read-only | mandatory | An object containing the hour for which these measurements apply (based on a 24-hour clock). |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.2 | Columng3pkvoicesumYear | read-only | mandatory | An object containing the Year the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.3 | Columng3pkvoicesumMonth | read-only | mandatory | An object containing the Month the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.4 | Columng3pkvoicesumDay | read-only | mandatory | An object containing the Day the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.5 | Columng3pkvoicesumHour | read-only | mandatory | An object containing the Hour the command was executed. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.6 | Columng3pkvoicesumAvailablePorts | read-only | mandatory | An object containing the total number of VC ports in the system. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.7 | Columng3pkvoicesumAvailableUsage | read-only | mandatory | An object containing the total time, in CCS units, that all VC ports are available in the system (calculated as number of MMI ports * 36). |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.8 | Columng3pkvoicesumH320Usage | read-only | mandatory | An object containing the total time that VC ports are allocated to H320 endpoints. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.9 | Columng3pkvoicesumVoiceUsage | read-only | mandatory | An object containing the total time that VC ports are allocated to voice endpoints. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.10 | Columng3pkvoicesumTotalUsage | read-only | mandatory | An object containing the total time, in CCS units, that VC ports are unavailable to carry a new call. This includes time that the ports are busy on a call, out… |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.11 | Columng3pkvoicesumH320Allocation | read-only | mandatory | An object containing the total number of times a VC port was allocated to a H320 call. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.12 | Columng3pkvoicesumVoiceAllocation | read-only | mandatory | An object containing the total number of times a VC port was allocated to a voice call. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.13 | Columng3pkvoicesumTotalAllocation | read-only | mandatory | An object containing the total number of times a VC port was allocated to any call. Each B-channel used on a multimedia call counts as one allocation. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.14 | Columng3pkvoicesumH320Denials | read-only | mandatory | An object containing the number of times a port was needed for an H320 call, but was not available. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.15 | Columng3pkvoicesumVoiceDenials | read-only | mandatory | An object containing the number of times a port was need for a voice call, but was not available. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.16 | Columng3pkvoicesumTotalDenials | read-only | mandatory | An object containing the total number of times a VC port was needed for any call, but was not allocated because all VC ports were busy. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.17 | Columng3pkvoicesumOutofService | read-only | mandatory | An object containing the total time, in CCS units, that any VC ports were out of service during any part of the measured interval. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.18 | Columng3pkvoicesumPercentAPB | read-only | mandatory | An object containing the percentage of time during the measured interval that all VC ports are unavailable to carry a new call. |
| 1.3.6.1.4.1.6889.2.8.1.124.6.1.19 | Columng3pkvoicesumPercentBlock | read-only | mandatory | An object containing the percentage of attempted allocations of VC ports that are not successful. This value is calculated as percent blockage = ((Total VC Den… |
| 1.3.6.1.4.1.6889.2.8.1.125 | Nodeg3ipintlist | |||
| 1.3.6.1.4.1.6889.2.8.1.125.1 | Scalarg3ipintlistTage | read-only | mandatory | The number of timeticks since the ip interface data was last extracted from the switch by the Proxy Agent.This object along with the g3ipintlistTintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.125.2 | Scalarg3ipintlistTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.125.3 | Scalarg3ipintlistTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.125.4 | Scalarg3ipintlistTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.125.5 | Scalarg3ipintlistTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.125.6 | Tableg3ipintlistTable | not-accessible | mandatory | A list of g3ipintlist entries. |
| 1.3.6.1.4.1.6889.2.8.1.125.6.1 | Rowg3ipintlistEntry | not-accessible | mandatory | A g3ipintlist entry containing objects of the g3ipintlist information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.125.6.1.1 | Columng3ipintlistNodeName | read-only | mandatory | An object containing the the node-name for the ip interface |
| 1.3.6.1.4.1.6889.2.8.1.125.6.1.2 | Columng3ipintlistSlot | read-only | mandatory | An object containing the the VAL, CLAN or MEDPRO board slot number |
| 1.3.6.1.4.1.6889.2.8.1.126 | Nodeg3stamedlist | |||
| 1.3.6.1.4.1.6889.2.8.1.126.1 | Scalarg3stamedlistTage | read-only | mandatory | The number of timeticks since the media gateway status data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamedlistTi… |
| 1.3.6.1.4.1.6889.2.8.1.126.2 | Scalarg3stamedlistTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.126.3 | Scalarg3stamedlistTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.126.4 | Scalarg3stamedlistTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.126.5 | Scalarg3stamedlistTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.126.6 | Tableg3stamedlistTable | not-accessible | mandatory | A list of g3stamedlist entries. |
| 1.3.6.1.4.1.6889.2.8.1.126.6.1 | Rowg3stamedlistEntry | not-accessible | mandatory | A g3stamedlist entry containing objects of the g3stamedlist information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.126.6.1.1 | Columng3stamedlistGatewayStatus | read-only | mandatory | An object containing the status of the first set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link stat… |
| 1.3.6.1.4.1.6889.2.8.1.127 | Nodeg3lsplist | |||
| 1.3.6.1.4.1.6889.2.8.1.127.1 | Scalarg3lsplistTage | read-only | mandatory | The number of timeticks since the survivable processor data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3lsplistTintv… |
| 1.3.6.1.4.1.6889.2.8.1.127.2 | Scalarg3lsplistTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.127.3 | Scalarg3lsplistTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.127.4 | Scalarg3lsplistTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.127.5 | Scalarg3lsplistTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.127.6 | Tableg3lsplistTable | not-accessible | mandatory | A list of g3lsplist entries. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1 | Rowg3lsplistEntry | not-accessible | mandatory | A g3lsplist entry containing objects of the g3lsplist information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.1 | Columng3lsplistNodeName | read-only | mandatory | An object containing the survivable processor node name. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.2 | Columng3lsplistIPAddr1 | read-only | mandatory | An object containing the first part of the survivable processor IP address on pre-3.1 CM releases. On CM 3.1 and greater, the complete IP address is populated … |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.3 | Columng3lsplistIPAddr2 | read-only | mandatory | An object containing the second part of the survivable processor IP address. This field is only populated on pre-3.1 CM releases. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.4 | Columng3lsplistIPAddr3 | read-only | mandatory | An object containing the third part of the survivable processor IP address. This field is only populated on pre-3.1 CM releases. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.5 | Columng3lsplistIPAddr4 | read-only | mandatory | An object containing the fourth part of the surivivable processor IP address. This field is only populated on pre-3.1 CM releases. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.6 | Columng3lsplistAvailable | read-only | mandatory | An object indicating the availability of the survivable processor (y(es) or n(o)). This field is only populated on older CM releases. This field has become obs… |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.7 | Columng3lsplistXlnUpdated | read-only | mandatory | An object containing the date and time of the last translation update in the format mm/dd/hh:mm. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.8 | Columng3lsplistServiceState | read-only | mandatory | An object containing the service state of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.9 | Columng3lsplistNetworkRegion | read-only | mandatory | An object containing the network region of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.10 | Columng3lsplistType | read-only | mandatory | An object containing the type of the survivable processor (LSP or ESS). |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.11 | Columng3lsplistID | read-only | mandatory | An object containing the number of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.12 | Columng3lsplistRegistered | read-only | mandatory | An object indicating whether the survivable processor is registered (y(es) or n(o)). |
| 1.3.6.1.4.1.6889.2.8.1.127.6.1.13 | Columng3lsplistActive | read-only | mandatory | An object indicating the active state of survivable processor (y(es)or n(o)). |
| 1.3.6.1.4.1.6889.2.8.1.128 | Nodeg3eventhour | |||
| 1.3.6.1.4.1.6889.2.8.1.128.1 | Scalarg3eventhourTage | read-only | mandatory | The number of timeticks since the last hour denial event data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3eventhourT… |
| 1.3.6.1.4.1.6889.2.8.1.128.2 | Scalarg3eventhourTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.128.3 | Scalarg3eventhourTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.128.4 | Scalarg3eventhourTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.128.5 | Scalarg3eventhourTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.128.6 | Tableg3eventhourTable | not-accessible | mandatory | A list of g3eventhour entries. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1 | Rowg3eventhourEntry | not-accessible | mandatory | A g3eventhour entry containing objects of the g3eventhour information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.1 | Columng3eventhourEventType | read-only | mandatory | An INTEGER object containing the event code number for a given denial event. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.2 | Columng3eventhourIndex | read-only | mandatory | An INTEGER object containing an index numbering the event entry for the type specified in EventType. This object along with EventType will serve as the instanc… |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.3 | Columng3eventhourEventDesc | read-only | mandatory | A DisplayString object containing the denial event description. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.4 | Columng3eventhourEventData1 | read-only | mandatory | A DisplayString object containing the first half of the event data. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.5 | Columng3eventhourEventData2 | read-only | mandatory | A DisplayString object containing the last half of the event data. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.6 | Columng3eventhourFirstMonth | read-only | mandatory | A DisplayString object containing the Month of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.7 | Columng3eventhourFirstDay | read-only | mandatory | A DisplayString object containing the Day of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.8 | Columng3eventhourFirstHour | read-only | mandatory | A DisplayString object containing the Hour of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.9 | Columng3eventhourFirstMinute | read-only | mandatory | A DisplayString object containing the Minute of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.10 | Columng3eventhourLastMonth | read-only | mandatory | A DisplayString object containing the Month of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.11 | Columng3eventhourLastDay | read-only | mandatory | A DisplayString object containing the Day of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.12 | Columng3eventhourLastHour | read-only | mandatory | A DisplayString object containing the Hour of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.13 | Columng3eventhourLastMinute | read-only | mandatory | A DisplayString object containing the Minute of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.128.6.1.14 | Columng3eventhourEventCount | read-only | mandatory | A DisplayString object containing the number of occurrences of the denial event. |
| 1.3.6.1.4.1.6889.2.8.1.129 | Nodeg3eventday | |||
| 1.3.6.1.4.1.6889.2.8.1.129.1 | Scalarg3eventdayTage | read-only | mandatory | The number of timeticks since the last day denial event data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3eventdayTin… |
| 1.3.6.1.4.1.6889.2.8.1.129.2 | Scalarg3eventdayTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.129.3 | Scalarg3eventdayTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.129.4 | Scalarg3eventdayTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.129.5 | Scalarg3eventdayTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.129.6 | Tableg3eventdayTable | not-accessible | mandatory | A list of g3eventday entries. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1 | Rowg3eventdayEntry | not-accessible | mandatory | A g3eventday entry containing objects of the g3eventday information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.1 | Columng3eventdayEventType | read-only | mandatory | An INTEGER object containing the event code number for a given denial event. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.2 | Columng3eventdayIndex | read-only | mandatory | An INTEGER object containing an index numbering the event entry for the type specified in EventType. This object along with EventType will serve as the instanc… |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.3 | Columng3eventdayEventDesc | read-only | mandatory | A DisplayString object containing the denial event description. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.4 | Columng3eventdayEventData1 | read-only | mandatory | A DisplayString object containing the first half of the event data. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.5 | Columng3eventdayEventData2 | read-only | mandatory | A DisplayString object containing the last half of the event data. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.6 | Columng3eventdayFirstMonth | read-only | mandatory | A DisplayString object containing the Month of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.7 | Columng3eventdayFirstDay | read-only | mandatory | A DisplayString object containing the Day of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.8 | Columng3eventdayFirstHour | read-only | mandatory | A DisplayString object containing the Hour of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.9 | Columng3eventdayFirstMinute | read-only | mandatory | A DisplayString object containing the Minute of the first occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.10 | Columng3eventdayLastMonth | read-only | mandatory | A DisplayString object containing the Month of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.11 | Columng3eventdayLastDay | read-only | mandatory | A DisplayString object containing the Day of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.12 | Columng3eventdayLastHour | read-only | mandatory | A DisplayString object containing the Hour of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.13 | Columng3eventdayLastMinute | read-only | mandatory | A DisplayString object containing the Minute of the last occurrence. |
| 1.3.6.1.4.1.6889.2.8.1.129.6.1.14 | Columng3eventdayEventCount | read-only | mandatory | A DisplayString object containing the number of occurrences of the denial event. |
| 1.3.6.1.4.1.6889.2.8.1.130 | Nodeg3statregion | |||
| 1.3.6.1.4.1.6889.2.8.1.130.1 | Scalarg3statregionTage | read-only | mandatory | The number of timeticks since the network region status data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3statregionT… |
| 1.3.6.1.4.1.6889.2.8.1.130.2 | Scalarg3statregionTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.130.3 | Scalarg3statregionTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.130.4 | Scalarg3statregionTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.130.5 | Scalarg3statregionTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.130.6 | Tableg3statregionTable | not-accessible | mandatory | A list of g3statregion entries. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1 | Rowg3statregionEntry | not-accessible | mandatory | A g3statregion entry containing objects of the g3statregion information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.1 | Columng3statregionSourceRegion | read-only | mandatory | An INTEGER object containing the IP network region that is the source of the VoIP traffic. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.2 | Columng3statregionDestRegion | read-only | mandatory | An INTEGER object containing the IP network region that is the destination of the VoIP traffic. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.3 | Columng3statregionConnType | read-only | mandatory | A DisplayString object containing the type of connection (either direct or indirect). |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.4 | Columng3statregionConnStatus | read-only | mandatory | A DisplayString object containing the status of connection (either pass or fail). |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.5 | Columng3statregionBWLimitValue | read-only | mandatory | A DisplayString object containing the administered bandwidth value. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.6 | Columng3statregionBWLimitUnits | read-only | mandatory | A DisplayString object containing the administered bandwidth units (Calls, Kbits, Mbits, or NoLimit). |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.7 | Columng3statregionBWUsedTx | read-only | mandatory | A DisplayString object containing the transmit bandwidth used for direct connections only. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.8 | Columng3statregionBWUsedRx | read-only | mandatory | A DisplayString object containing the receive bandwidth used for direct connections only. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.9 | Columng3statregionNbrConnTx | read-only | mandatory | A DisplayString object containing the transmit connection count for direct connections only. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.10 | Columng3statregionNbrConnRx | read-only | mandatory | A DisplayString object containing the receive connection count for direct connections only. |
| 1.3.6.1.4.1.6889.2.8.1.130.6.1.11 | Columng3statregionDenialCount | read-only | mandatory | A DisplayString object containing the denial count. |
| 1.3.6.1.4.1.6889.2.8.1.131 | Nodeg3ipnetregion | |||
| 1.3.6.1.4.1.6889.2.8.1.131.1 | Scalarg3ipnetregionTage | read-only | mandatory | The number of timeticks since the network region data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ipnetregionTintvl … |
| 1.3.6.1.4.1.6889.2.8.1.131.2 | Scalarg3ipnetregionTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.131.3 | Scalarg3ipnetregionTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.131.4 | Scalarg3ipnetregionTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.131.5 | Scalarg3ipnetregionTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.131.6 | Tableg3ipnetregionTable | not-accessible | mandatory | A list of g3ipnetregion entries. |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1 | Rowg3ipnetregionEntry | not-accessible | mandatory | A g3ipnetregion entry containing objects of the g3ipnetregion information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.1 | Columng3ipnetregionRegion | read-write | mandatory | An INTEGER object containing the IP network region number (value 1-2000). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.2 | Columng3ipnetregionCCPHB | read-write | mandatory | A DisplayString object containing the DiffServ/TOS Call Control PHB (value 0-63). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.3 | Columng3ipnetregionAudioPHB | read-write | mandatory | A DisplayString object containing the DiffServ/TOS Audio PHB (value 0-63). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.4 | Columng3ipnetregionCC8021Pri | read-write | mandatory | A DisplayString object containing the Call Control 802.1p Priority (values 0-7). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.5 | Columng3ipnetregionAudio8021Pri | read-write | mandatory | A DisplayString object containing the Audio 802.1p Priority (values 0-7). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.6 | Columng3ipnetregionRSVPEnabled | read-write | mandatory | A DisplayString object containing a flag indicating whether RSVP is enabled (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.7 | Columng3ipnetregionRSVPRefresh | read-write | mandatory | A DisplayString object containing the RSVP Refresh Rate (values 1-99). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.8 | Columng3ipnetregionRSVPFailure | read-write | mandatory | A DisplayString object containing a flag indicating whether retry on RSVP failure is enabled (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.9 | Columng3ipnetregionRSVPProfile | read-write | mandatory | A DisplayString object containing the RSVP profile (controlled-load or guaranteed-service). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.10 | Columng3ipnetregionRSVPBBE | read-write | mandatory | A DisplayString object containing the RSVP unreserved BBE PHB (values 0-63). |
| 1.3.6.1.4.1.6889.2.8.1.131.6.1.11 | Columng3ipnetregionLastError | read-only | mandatory | A DisplayString Object that contains the last error message encountered when attempting to change ip-network-region parameters. |
| 1.3.6.1.4.1.6889.2.8.1.132 | Nodeg3statmedpro | |||
| 1.3.6.1.4.1.6889.2.8.1.132.1 | Scalarg3statmedproTage | read-only | mandatory | The number of timeticks since the media processor status data was extracted from the switch by the G3 Proxy Agent. This object along with the g3statmedproTintv… |
| 1.3.6.1.4.1.6889.2.8.1.132.2 | Scalarg3statmedproTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.132.3 | Scalarg3statmedproTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.132.4 | Scalarg3statmedproTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.132.5 | Scalarg3statmedproTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.132.6 | Tableg3statmedproTable | not-accessible | mandatory | A list of g3statmedpro entries. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1 | Rowg3statmedproEntry | not-accessible | mandatory | A g3statmedpro entry containing objects of the g3statmedpro information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.1 | Columng3statmedproBoardLoc | read-only | mandatory | A DisplayString Object contains the media processor board location. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.2 | Columng3statmedproState | read-only | mandatory | A DisplayString Object that contains state of the media processor board (values can be 'active', 'standby' or 'init'). |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.3 | Columng3statmedproNodeName | read-only | mandatory | A DisplayString Object that contains the node name for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.4 | Columng3statmedproSourceIP | read-only | mandatory | A DisplayString Object that contains the source IPV4 address for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.5 | Columng3statmedproSubnetMask | read-only | mandatory | A DisplayString Object that contains the IPV4 subnet mask for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.6 | Columng3statmedproBroadCastAddr | read-only | mandatory | A DisplayString Object that contains the broadcast IP address for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.7 | Columng3statmedproMACAddress | read-only | mandatory | A DisplayString Object that contains the MAC address of the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.8 | Columng3statmedproEtherEnabled | read-only | mandatory | A DisplayString Object that designates whether or not the IP interface is enabled (yes or no) for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.9 | Columng3statmedproDSPChanStatus1 | read-only | mandatory | A DisplayString Object that contains the service state of the respective DSP resource (for the media processor board). |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.10 | Columng3statmedproDSPChanStatus2 | read-only | mandatory | See DESCRIPTION of g3statmedproDSPChanStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.11 | Columng3statmedproDSPChanStatus3 | read-only | mandatory | See DESCRIPTION of g3statmedproDSPChanStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.12 | Columng3statmedproDSPChanStatus4 | read-only | mandatory | See DESCRIPTION of g3statmedproDSPChanStatus1. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.13 | Columng3statmedproDupDSPChanStatus5 | read-only | mandatory | A DisplayString Object that contains the service state of the respective DSP resource (for the duplicate media processor board). |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.14 | Columng3statmedproDupDSPChanStatus6 | read-only | mandatory | See DESCRIPTION of g3statmedproDupDSPChanStatus5. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.15 | Columng3statmedproDupDSPChanStatus7 | read-only | mandatory | See DESCRIPTION of g3statmedproDupDSPChanStatus5. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.16 | Columng3statmedproDupDSPChanStatus8 | read-only | mandatory | See DESCRIPTION of g3statmedproDupDSPChanStatus5. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.17 | Columng3statmedproNetworkRegion | read-only | mandatory | A DisplayString Object that contains the network region number for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.18 | Columng3statmedproAltNetworkRegion | read-only | mandatory | A DisplayString Object that contains the alternate network region number for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.19 | Columng3statmedproStandbyRefreshed | read-only | mandatory | A DisplayString Object that indicates whether the standby board in a duplicated pair of media processor boards is in sync with the active board (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.20 | Columng3statmedproSharedIP | read-only | mandatory | A DisplayString Object that contains the shared virtual IP address between two duplicated media processor boards. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.21 | Columng3statmedproSharedVirtMAC | read-only | mandatory | A DisplayString Object that contains the shared virtual MAC address between two duplicated media processor boards. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.22 | Columng3statmedproDupBoardLoc | read-only | mandatory | A DisplayString Object contains the duplicate media processor board location. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.23 | Columng3statmedproDupState | read-only | mandatory | A DisplayString Object that contains state of the duplicate media processor board (values can be 'active', 'standby' or 'init'). |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.24 | Columng3statmedproDupNodeName | read-only | mandatory | A DisplayString Object that contains the node name for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.25 | Columng3statmedproDupSourceIP | read-only | mandatory | A DisplayString Object that contains the source IP address for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.26 | Columng3statmedproDupSubnetMask | read-only | mandatory | A DisplayString Object that contains the subnet mask for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.27 | Columng3statmedproDupBroadCastAddr | read-only | mandatory | A DisplayString Object that contains the broadcast IP address for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.28 | Columng3statmedproDupMACAddress | read-only | mandatory | A DisplayString Object that contains the MAC address of the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.29 | Columng3statmedproDupEtherEnabled | read-only | mandatory | A DisplayString Object that designates whether or not the IP interface is enabled (yes or no) for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.30 | Columng3statmedproLinkMPCL | read-only | mandatory | A DisplayString Object that indicates the status of the Media Processor Control Link ('up' or 'dn') for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.31 | Columng3statmedproLinkEth | read-only | mandatory | A DisplayString Object that indicates the status of the Ethernet Link ('up' or 'dn') for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.32 | Columng3statmedproLinkPeer | read-only | mandatory | A DisplayString Object that indicates the status of the Peer Link ('up' or 'dn') for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.33 | Columng3statmedproAlarmMaj | read-only | mandatory | A DisplayString Object that indicates the number of major alarms active on the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.34 | Columng3statmedproAlarmMin | read-only | mandatory | A DisplayString Object that indicates the number of minor alarms active on the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.35 | Columng3statmedproAlarmWrn | read-only | mandatory | A DisplayString Object that indicates the number of warning alarms active on the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.36 | Columng3statmedproDupLinkMPCL | read-only | mandatory | A DisplayString Object that indicates the status of the Media Processor Control Link ('up' or 'dn') for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.37 | Columng3statmedproDupLinkEth | read-only | mandatory | A DisplayString Object that indicates the status of the Ethernet Link ('up' or 'dn') for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.38 | Columng3statmedproDupLinkPeer | read-only | mandatory | A DisplayString Object that indicates the status of the Peer Link ('up' or 'dn') for the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.39 | Columng3statmedproDupAlarmMaj | read-only | mandatory | A DisplayString Object that indicates the number of major alarms active on the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.40 | Columng3statmedproDupAlarmMin | read-only | mandatory | A DisplayString Object that indicates the number of minor alarms active on the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.41 | Columng3statmedproDupAlarmWrn | read-only | mandatory | A DisplayString Object that indicates the number of warning alarms active on the duplicate media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.42 | Columng3statmedproLocked | read-only | mandatory | A DisplayString Object that indicates whether the set medpro override and lock command argument is in use (yes or no). |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.43 | Columng3statmedproSourceIPV6 | read-only | mandatory | A DisplayString Object that contains the source IPV6 address for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.44 | Columng3statmedproIPV6SubnetMask | read-only | mandatory | A DisplayString Object that contains the IPV6 subnet mask for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.45 | Columng3statmedproIPV6GatewayAddr | read-only | mandatory | A DisplayString Object that contains the IPV6 address of the Gateway. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.46 | Columng3statmedproIPV6NodeName | read-only | mandatory | A DisplayString Object that contains the IPV6 node name for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.132.6.1.47 | Columng3statmedproIPV6EtherEnable | read-only | mandatory | A DisplayString Object that designates whether or not the IPV6 interface is enabled (yes or no) for the media processor board. |
| 1.3.6.1.4.1.6889.2.8.1.133 | Nodeg3ipunreg | |||
| 1.3.6.1.4.1.6889.2.8.1.133.1 | Scalarg3ipunregTage | read-only | mandatory | The number of timeticks since the list of unregistered IP phones was last extracted from the switch by the Proxy Agent. This object along with the g3ipunregTin… |
| 1.3.6.1.4.1.6889.2.8.1.133.2 | Scalarg3ipunregTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.133.3 | Scalarg3ipunregTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.133.4 | Scalarg3ipunregTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.133.5 | Scalarg3ipunregTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.133.6 | Tableg3ipunregTable | not-accessible | mandatory | A list of g3ipunreg entries. |
| 1.3.6.1.4.1.6889.2.8.1.133.6.1 | Rowg3ipunregEntry | not-accessible | mandatory | A g3ipunreg entry containing objects of the g3ipunreg information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.133.6.1.1 | Columng3ipunregStatExtn | read-only | mandatory | An object containing the extension of the unregistered IP telephone. |
| 1.3.6.1.4.1.6889.2.8.1.133.6.1.2 | Columng3ipunregStatPort | read-only | mandatory | An object containing the port location of the unregistered IP telephone. |
| 1.3.6.1.4.1.6889.2.8.1.133.6.1.3 | Columng3ipunregStatReg | read-only | mandatory | An object containing the registration status of the IP telephone (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.134 | Nodeg3commlink | |||
| 1.3.6.1.4.1.6889.2.8.1.134.1 | Scalarg3commlinkTage | read-only | mandatory | The number of timeticks since the communication interface link data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3comm… |
| 1.3.6.1.4.1.6889.2.8.1.134.2 | Scalarg3commlinkTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these… |
| 1.3.6.1.4.1.6889.2.8.1.134.3 | Scalarg3commlinkTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.134.4 | Scalarg3commlinkTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force… |
| 1.3.6.1.4.1.6889.2.8.1.134.5 | Scalarg3commlinkTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.134.6 | Tableg3commlinkTable | not-accessible | mandatory | A list of g3commlink entries. |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1 | Rowg3commlinkEntry | not-accessible | mandatory | A g3commlink entry containing objects of the g3commlink information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.1 | Columng3commlinkLinkNumber | read-only | mandatory | An object containing the system link number (1-99). |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.2 | Columng3commlinkLinkType | read-only | mandatory | An object containing the system link type. |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.3 | Columng3commlinkEnableLink | read-only | mandatory | An object containing a flag indicating whether the link is enabled (y/n). |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.4 | Columng3commlinkEstablishConn | read-only | mandatory | An object containing a flag indicating whether a connection has been established (y/n). |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.5 | Columng3commlinkExtension | read-only | mandatory | An object containing the extension number of the link. |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.6 | Columng3commlinkDestNumber | read-only | mandatory | An object containing the destination extension number. |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.7 | Columng3commlinkConnModule | read-only | mandatory | An object containing the extension number of the connected data module. |
| 1.3.6.1.4.1.6889.2.8.1.134.6.1.8 | Columng3commlinkName | read-only | mandatory | An object containing a description of the link. |
| 1.3.6.1.4.1.6889.2.8.1.135 | Nodeg3statlink | |||
| 1.3.6.1.4.1.6889.2.8.1.135.1 | Scalarg3statlinkTage | read-only | mandatory | The number of timeticks since the link status was last extracted from the switch by the Proxy Agent. This object along with the g3statlinkTintvl object allows … |
| 1.3.6.1.4.1.6889.2.8.1.135.2 | Scalarg3statlinkTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.135.3 | Scalarg3statlinkTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.135.4 | Scalarg3statlinkTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.135.5 | Scalarg3statlinkTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.135.6 | Tableg3statlinkTable | not-accessible | mandatory | A list of g3statlink entries. |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1 | Rowg3statlinkEntry | not-accessible | mandatory | A g3statlink entry containing objects of the g3statlink information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.1 | Columng3statlinkSysLinkNumber | read-only | mandatory | An object containing the system link number for the CLAN board. |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.2 | Columng3statlinkCLANBoardLoc | read-only | mandatory | An object containing the location of the CLAN board. |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.3 | Columng3statlinkDOLANSessions | read-only | mandatory | An object containing the number of current IP registrations through the CLAN board. |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.4 | Columng3statlinkIncRcvdUniPkt | read-only | mandatory | An object containing the number of unicast packets received |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.5 | Columng3statlinkIncRcvdMulPkt | read-only | mandatory | An object containing the number of multicast packets received |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.6 | Columng3statlinkIncRcvdOctet | read-only | mandatory | An object containing the number of octects received |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.7 | Columng3statlinkIncDrpErrPkt | read-only | mandatory | An object containing the number of incomming error packets |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.8 | Columng3statlinkIncDrpDisPkt | read-only | mandatory | An object containing the number of incomming discard packets |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.9 | Columng3statlinkOtgTransUniPkt | read-only | mandatory | An object containing the number of unicast packets transmitted |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.10 | Columng3statlinkOtgTransMulPkt | read-only | mandatory | An object containing the number of multicast packets transmitted |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.11 | Columng3statlinkOutTransOctet | read-only | mandatory | An object containing the number of octects received |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.12 | Columng3statlinkOtgDrpErrPkt | read-only | mandatory | An object containing the number of outgoing error packets |
| 1.3.6.1.4.1.6889.2.8.1.135.6.1.13 | Columng3statlinkOtgDrpDisPkt | read-only | mandatory | An object containing the number of outgoing discard packets |
| 1.3.6.1.4.1.6889.2.8.1.136 | Nodeg3covpath | |||
| 1.3.6.1.4.1.6889.2.8.1.136.1 | Scalarg3covpathTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3covpathTintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.136.2 | Scalarg3covpathTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.136.3 | Scalarg3covpathTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.136.4 | Scalarg3covpathTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.136.5 | Scalarg3covpathTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.136.6 | Tableg3covpathTable | not-accessible | mandatory | A list of g3covpath entries. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1 | Rowg3covpathEntry | not-accessible | mandatory | A g3covpath entry containing objects of the g3covpath information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.1 | Columng3covpathCoveragePath | read-only | mandatory | An object containing the measured coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.2 | Columng3covpathMeasHour | read-only | mandatory | An object containing the starting time of the hour during which the greatest number of calls are offered to the coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.3 | Columng3covpathCallsOffTotal | read-only | mandatory | An object containing the number of calls offered to the coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.4 | Columng3covpathCallsOffAct | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal being active. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.5 | Columng3covpathCallsOffBusy | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal being busy. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.6 | Columng3covpathCallsOffDA | read-only | mandatory | An object containing the number of calls offered to the coverage path because the principal did not answer the call after the administered number of rings. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.7 | Columng3covpathCallsOffCA | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal's use of Cover All. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.8 | Columng3covpathCallsOffSAC | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal's use of Send All Calls or the calling party using Go To Coverage. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.9 | Columng3covpathCallsOffCB | read-only | mandatory | An object containing the number of calls offered to the coverage path where the calling party used LWC or ACB before a coverage point answered the call. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.10 | Columng3covpathPoint1Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.11 | Columng3covpathPoint2Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.12 | Columng3covpathPoint3Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.13 | Columng3covpathPoint4Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.14 | Columng3covpathPoint5Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.15 | Columng3covpathPoint6Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.16 | Columng3covpathPoint1Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.17 | Columng3covpathPoint2Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.18 | Columng3covpathPoint3Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.19 | Columng3covpathPoint4Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.20 | Columng3covpathPoint5Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.136.6.1.21 | Columng3covpathPoint6Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137 | Nodeg3pkcovpath | |||
| 1.3.6.1.4.1.6889.2.8.1.137.1 | Scalarg3pkcovpathTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3pkcovpathTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.137.2 | Scalarg3pkcovpathTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.137.3 | Scalarg3pkcovpathTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.137.4 | Scalarg3pkcovpathTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.137.5 | Scalarg3pkcovpathTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.137.6 | Tableg3pkcovpathTable | not-accessible | mandatory | A list of g3pkcovpath entries. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1 | Rowg3pkcovpathEntry | not-accessible | mandatory | A g3pkcovpath entry containing objects of the g3pkcovpath information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.1 | Columng3pkcovpathCoveragePath | read-only | mandatory | An object containing the measured coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.2 | Columng3pkcovpathMeasHour | read-only | mandatory | An object containing the starting time of the hour during which the greatest number of calls are offered to the coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.3 | Columng3pkcovpathCallsOffTotal | read-only | mandatory | An object containing the number of calls offered to the coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.4 | Columng3pkcovpathCallsOffAct | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal being active. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.5 | Columng3pkcovpathCallsOffBusy | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal being busy. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.6 | Columng3pkcovpathCallsOffDA | read-only | mandatory | An object containing the number of calls offered to the coverage path because the principal did not answer the call after the administered number of rings. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.7 | Columng3pkcovpathCallsOffCA | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal's use of Cover All. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.8 | Columng3pkcovpathCallsOffSAC | read-only | mandatory | An object containing the number of calls offered to the coverage path due to the principal's use of Send All Calls or the calling party using Go To Coverage. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.9 | Columng3pkcovpathCallsOffCB | read-only | mandatory | An object containing the number of calls offered to the coverage path where the calling party used LWC or ACB before a coverage point answered the call. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.10 | Columng3pkcovpathPoint1Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.11 | Columng3pkcovpathPoint2Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.12 | Columng3pkcovpathPoint3Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.13 | Columng3pkcovpathPoint4Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.14 | Columng3pkcovpathPoint5Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.15 | Columng3pkcovpathPoint6Ans | read-only | mandatory | An object containing the total number of calls answered by the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.16 | Columng3pkcovpathPoint1Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.17 | Columng3pkcovpathPoint2Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.18 | Columng3pkcovpathPoint3Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.19 | Columng3pkcovpathPoint4Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.20 | Columng3pkcovpathPoint5Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.137.6.1.21 | Columng3pkcovpathPoint6Aband | read-only | mandatory | An object containing the total number of calls abandoned by the caller while ringing at the specified point. |
| 1.3.6.1.4.1.6889.2.8.1.138 | Nodeg3principal | |||
| 1.3.6.1.4.1.6889.2.8.1.138.1 | Scalarg3principalTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3principalTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.138.2 | Scalarg3principalTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.138.3 | Scalarg3principalTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.138.4 | Scalarg3principalTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.138.5 | Scalarg3principalTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.138.6 | Tableg3principalTable | not-accessible | mandatory | A list of g3principal entries. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1 | Rowg3principalEntry | not-accessible | mandatory | A g3principal entry containing objects of the g3principal information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.1 | Columng3principalExtensionTAC | read-only | mandatory | An object containing the measured coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.2 | Columng3principalMeasHour | read-only | mandatory | An object containing the starting time of the hour during which the greatest number of calls are offered to the principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.3 | Columng3principalCallsOffTotal | read-only | mandatory | An object containing the number of calls offered to the principal. path. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.4 | Columng3principalCallsAband | read-only | mandatory | An object containing the total number of abandoned calls, where the calling party hung up before the call was answered or sent to coverage. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.5 | Columng3principalCallsRedirect | read-only | mandatory | An object containing the total number of calls not answered by the principal and subsequently sent to coverage. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.6 | Columng3principalCallsCAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal due to the principal being active. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.7 | Columng3principalCallsCBC | read-only | mandatory | An object containing the number of calls to coverage by this principal due to the principal being busy. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.8 | Columng3principalCallsCDAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal because the principal didn't answer the call after the administered number of rings. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.9 | Columng3principalCallsCCAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal due to the principal's use of Cover All. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.10 | Columng3principalCallsCSAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal due to the principal's use of Send All Calls, or because the calling party used the… |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.11 | Columng3principalCallsCSCB | read-only | mandatory | An object containing the number of calls offered to this principal where the calling party used LWC or ACB before the principal answered the call and before it… |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.12 | Columng3principalCovPath1 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.13 | Columng3principalCovPath2 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.14 | Columng3principalCovPath3 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.15 | Columng3principalCovPath4 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.16 | Columng3principalCovPath5 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.17 | Columng3principalCovPath6 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.18 | Columng3principalCovPath7 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.138.6.1.19 | Columng3principalCovPath8 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139 | Nodeg3pkprincipal | |||
| 1.3.6.1.4.1.6889.2.8.1.139.1 | Scalarg3pkprincipalTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3principalTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.139.2 | Scalarg3pkprincipalTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.139.3 | Scalarg3pkprincipalTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.139.4 | Scalarg3pkprincipalTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.139.5 | Scalarg3pkprincipalTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.139.6 | Tableg3pkprincipalTable | not-accessible | mandatory | A list of g3pkprincipal entries. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1 | Rowg3pkprincipalEntry | not-accessible | mandatory | A g3pkprincipal entry containing objects of the g3pkprincipal information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.1 | Columng3pkprincipalExtensionTAC | read-only | mandatory | An object containing the measured coverage path. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.2 | Columng3pkprincipalMeasHour | read-only | mandatory | An object containing the starting time of the hour during which the greatest number of calls are offered to the principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.3 | Columng3pkprincipalCallsOffTotal | read-only | mandatory | An object containing the number of calls offered to the principal. path. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.4 | Columng3pkprincipalCallsAband | read-only | mandatory | An object containing the total number of abandoned calls, where the calling party hung up before the call was answered or sent to coverage. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.5 | Columng3pkprincipalCallsRedirect | read-only | mandatory | An object containing the total number of calls not answered by the principal and subsequently sent to coverage. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.6 | Columng3pkprincipalCallsCAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal due to the principal being active. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.7 | Columng3pkprincipalCallsCBC | read-only | mandatory | An object containing the number of calls to coverage by this principal due to the principal being busy. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.8 | Columng3pkprincipalCallsCDAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal because the principal didn't answer the call after the administered number of rings. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.9 | Columng3pkprincipalCallsCCAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal due to the principal's use of Cover All. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.10 | Columng3pkprincipalCallsCSAC | read-only | mandatory | An object containing the number of calls sent to coverage by this principal due to the principal's use of Send All Calls, or because the calling party used the… |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.11 | Columng3pkprincipalCallsCSCB | read-only | mandatory | An object containing the number of calls offered to this principal where the calling party used LWC or ACB before the principal answered the call and before it… |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.12 | Columng3pkprincipalCovPath1 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.13 | Columng3pkprincipalCovPath2 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.14 | Columng3pkprincipalCovPath3 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.15 | Columng3pkprincipalCovPath4 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.16 | Columng3pkprincipalCovPath5 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.17 | Columng3pkprincipalCovPath6 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.18 | Columng3pkprincipalCovPath7 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.139.6.1.19 | Columng3pkprincipalCovPath8 | read-only | mandatory | An object containing a coverage path used by this principal. |
| 1.3.6.1.4.1.6889.2.8.1.140 | Nodeg3esmain | |||
| 1.3.6.1.4.1.6889.2.8.1.140.1 | Scalarg3esmainTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3esmainTintvl object al… |
| 1.3.6.1.4.1.6889.2.8.1.140.2 | Scalarg3esmainTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.140.3 | Scalarg3esmainTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.140.4 | Scalarg3esmainTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.140.5 | Scalarg3esmainTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.140.6 | Tableg3esmainTable | not-accessible | mandatory | A list of g3esmain entries. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1 | Rowg3esmainEntry | not-accessible | mandatory | A g3esmain entry containing objects of the g3esmain information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.1 | Columng3esmainClusterId | read-only | mandatory | An object containing the unique module id, for the main server, from the license file for this cluster.This MIB group has become obsolete. The new MIB group is… |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.2 | Columng3esmainPlatformType | read-only | mandatory | An object containing the platform type (S8500 or S8700).This MIB group has become obsolete.The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.3 | Columng3esmainServerAId | read-only | mandatory | An object containing the Server A id field. Acceptable values are 1-999 and it must be unique.This MIB group has become obsolete. The new MIB group is esmainsr… |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.4 | Columng3esmainServerAIP1 | read-only | mandatory | An object containing the first part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.5 | Columng3esmainServerAIP2 | read-only | mandatory | An object containing the second part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.6 | Columng3esmainServerAIP3 | read-only | mandatory | An object containing the third part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.7 | Columng3esmainServerAIP4 | read-only | mandatory | An object containing the last part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.8 | Columng3esmainServerBId | read-only | mandatory | An object containing the Server B id field. Acceptable values are 1-999 and it must be unique (only available if the platform type is S8700).This MIB group has… |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.9 | Columng3esmainServerBIP1 | read-only | mandatory | An object containing the first part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.10 | Columng3esmainServerBIP2 | read-only | mandatory | An object containing the second part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.11 | Columng3esmainServerBIP3 | read-only | mandatory | An object containing the third part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.12 | Columng3esmainServerBIP4 | read-only | mandatory | An object containing the last part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is esmainsrv. |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.13 | Columng3esmainPriorityScore | read-only | mandatory | An object containing a numerical value that allows the customer to assign a preferred cluster (can accept values of 1-100; default is blank).This MIB group has… |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.14 | Columng3esmainNetComm | read-only | mandatory | An object containing the region the ESS cluster is in (used for localization; can have values between 1-64; default is 1). This MIB group has become obsolete. … |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.15 | Columng3esmainSystemPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service on a system-wide basis (values can b… |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.16 | Columng3esmainLocalPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service in the same network community before… |
| 1.3.6.1.4.1.6889.2.8.1.140.6.1.17 | Columng3esmainLocalOnly | read-only | mandatory | An object containing a flag indicating that only clusters in the same network community can provide service (values can be 'y' or 'n'; default is 'n')s MIB gro… |
| 1.3.6.1.4.1.6889.2.8.1.141 | Nodeg3esservers | |||
| 1.3.6.1.4.1.6889.2.8.1.141.1 | Scalarg3esserversTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3esserversTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.141.2 | Scalarg3esserversTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.141.3 | Scalarg3esserversTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.141.4 | Scalarg3esserversTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.141.5 | Scalarg3esserversTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.141.6 | Tableg3esserversTable | not-accessible | mandatory | A list of g3esservers entries. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1 | Rowg3esserversEntry | not-accessible | mandatory | A g3esservers entry containing objects of the g3esservers information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.1 | Columng3esserversClusterId | read-only | mandatory | An object containing the unique module id, for the enterprise survivable server, from the license file for this cluster. This MIB group has become obsolete. Th… |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.2 | Columng3esserversPlatformType | read-only | mandatory | An object containing the platform type (S8500 or S8700). This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.3 | Columng3esserversServerAId | read-only | mandatory | An object containing the Server A id field. Acceptable values are 1-999 and it must be unique.This MIB group has become obsolete. The new MIB group is survproc… |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.4 | Columng3esserversServerAIP1 | read-only | mandatory | An object containing the first part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.5 | Columng3esserversServerAIP2 | read-only | mandatory | An object containing the second part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.6 | Columng3esserversServerAIP3 | read-only | mandatory | An object containing the third part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.7 | Columng3esserversServerAIP4 | read-only | mandatory | An object containing the last part of the IP Address for Server A. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.8 | Columng3esserversServerBId | read-only | mandatory | An object containing the Server B id field. Acceptable values are 1-999 and it must be unique (only available if the platform type is S8700). The new MIB group… |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.9 | Columng3esserversServerBIP1 | read-only | mandatory | An object containing the first part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.10 | Columng3esserversServerBIP2 | read-only | mandatory | An object containing the second part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.11 | Columng3esserversServerBIP3 | read-only | mandatory | An object containing the third part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.12 | Columng3esserversServerBIP4 | read-only | mandatory | An object containing the last part of the IP Address for Server B. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.13 | Columng3esserversPriorityScore | read-only | mandatory | An object containing a numerical value that allows the customer to assign a preferred cluster (can accept values of 1-100; default is blank). This MIB group ha… |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.14 | Columng3esserversNetComm | read-only | mandatory | An object containing the region the ESS cluster is in (used for localization; can have values between 1-64; default is 1). This MIB group has become obsolete. … |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.15 | Columng3esserversSystemPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service on a system-wide basis (values can b… |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.16 | Columng3esserversLocalPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service in the same network community before… |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.17 | Columng3esserversLocalOnly | read-only | mandatory | An object containing a flag indicating that only clusters in the same network community can provide service (values can be 'y' or 'n'; default is 'n').This MIB… |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.18 | Columng3esserversServerANodeName | read-only | mandatory | An object containing the node name of Server A.This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.141.6.1.19 | Columng3esserversServerBNodeName | read-only | mandatory | An object containing the node name of Server B. This MIB group has become obsolete. The new MIB group is survprocess. |
| 1.3.6.1.4.1.6889.2.8.1.142 | Nodeg3esparms | |||
| 1.3.6.1.4.1.6889.2.8.1.142.1 | Scalarg3esparmsTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3esparmsTintvl object a… |
| 1.3.6.1.4.1.6889.2.8.1.142.2 | Scalarg3esparmsTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.142.3 | Scalarg3esparmsTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.142.4 | Scalarg3esparmsTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.142.5 | Scalarg3esparmsTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.142.6 | Scalarg3esparmsNetCommunity1 | read-only | mandatory | An object containing a network community value for the corresponding port network (can have values between 1-64; default is 1). |
| 1.3.6.1.4.1.6889.2.8.1.142.7 | Scalarg3esparmsNetCommunity2 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.8 | Scalarg3esparmsNetCommunity3 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.9 | Scalarg3esparmsNetCommunity4 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.10 | Scalarg3esparmsNetCommunity5 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.11 | Scalarg3esparmsNetCommunity6 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.12 | Scalarg3esparmsNetCommunity7 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.13 | Scalarg3esparmsNetCommunity8 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.14 | Scalarg3esparmsNetCommunity9 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.15 | Scalarg3esparmsNetCommunity10 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.16 | Scalarg3esparmsNetCommunity11 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.17 | Scalarg3esparmsNetCommunity12 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.18 | Scalarg3esparmsNetCommunity13 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.19 | Scalarg3esparmsNetCommunity14 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.20 | Scalarg3esparmsNetCommunity15 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.21 | Scalarg3esparmsNetCommunity16 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.22 | Scalarg3esparmsNetCommunity17 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.23 | Scalarg3esparmsNetCommunity18 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.24 | Scalarg3esparmsNetCommunity19 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.25 | Scalarg3esparmsNetCommunity20 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.26 | Scalarg3esparmsNetCommunity21 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.27 | Scalarg3esparmsNetCommunity22 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.28 | Scalarg3esparmsNetCommunity23 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.29 | Scalarg3esparmsNetCommunity24 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.30 | Scalarg3esparmsNetCommunity25 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.31 | Scalarg3esparmsNetCommunity26 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.32 | Scalarg3esparmsNetCommunity27 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.33 | Scalarg3esparmsNetCommunity28 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.34 | Scalarg3esparmsNetCommunity29 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.35 | Scalarg3esparmsNetCommunity30 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.36 | Scalarg3esparmsNetCommunity31 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.37 | Scalarg3esparmsNetCommunity32 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.38 | Scalarg3esparmsNetCommunity33 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.39 | Scalarg3esparmsNetCommunity34 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.40 | Scalarg3esparmsNetCommunity35 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.41 | Scalarg3esparmsNetCommunity36 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.42 | Scalarg3esparmsNetCommunity37 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.43 | Scalarg3esparmsNetCommunity38 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.44 | Scalarg3esparmsNetCommunity39 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.45 | Scalarg3esparmsNetCommunity40 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.46 | Scalarg3esparmsNetCommunity41 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.47 | Scalarg3esparmsNetCommunity42 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.48 | Scalarg3esparmsNetCommunity43 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.49 | Scalarg3esparmsNetCommunity44 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.50 | Scalarg3esparmsNetCommunity45 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.51 | Scalarg3esparmsNetCommunity46 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.52 | Scalarg3esparmsNetCommunity47 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.53 | Scalarg3esparmsNetCommunity48 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.54 | Scalarg3esparmsNetCommunity49 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.55 | Scalarg3esparmsNetCommunity50 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.56 | Scalarg3esparmsNetCommunity51 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.57 | Scalarg3esparmsNetCommunity52 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.58 | Scalarg3esparmsNetCommunity53 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.59 | Scalarg3esparmsNetCommunity54 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.60 | Scalarg3esparmsNetCommunity55 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.61 | Scalarg3esparmsNetCommunity56 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.62 | Scalarg3esparmsNetCommunity57 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.63 | Scalarg3esparmsNetCommunity58 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.64 | Scalarg3esparmsNetCommunity59 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.65 | Scalarg3esparmsNetCommunity60 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.66 | Scalarg3esparmsNetCommunity61 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.67 | Scalarg3esparmsNetCommunity62 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.68 | Scalarg3esparmsNetCommunity63 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.69 | Scalarg3esparmsNetCommunity64 | read-only | mandatory | See DESCRIPTION of g3esparmsNetCommunity1. |
| 1.3.6.1.4.1.6889.2.8.1.142.70 | Scalarg3esparmsAutoReturn | read-only | mandatory | An object containing the state of auto return (values can be 'y' (yes), 'n' (no), or 's' (scheduled); default is 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.142.71 | Scalarg3esparmsDay | read-only | mandatory | An object containing the day of the week Saturday through Sunday (or every day) on which the auto return will occur (only applicable if AutoReturn is set to sc… |
| 1.3.6.1.4.1.6889.2.8.1.142.72 | Scalarg3esparmsHour | read-only | mandatory | An object containing the hour of the day (0-23) at which the auto return will occur (only applicable if AutoReturn is set to scheduled). |
| 1.3.6.1.4.1.6889.2.8.1.142.73 | Scalarg3esparmsMinute | read-only | mandatory | An object containing the minute of the hour (0-59) at which the auto return will occur (only applicable if AutoReturn is set to scheduled). |
| 1.3.6.1.4.1.6889.2.8.1.142.74 | Scalarg3esparmsNoServerTO | read-only | mandatory | An object containing a no service timeout interval indicating when the fail over will occur (can have values between 3-15 minutes; default is 5 minutes). |
| 1.3.6.1.4.1.6889.2.8.1.142.75 | Scalarg3esparmsIPSIConnUp | read-only | mandatory | An object containing the number of minutes that an IPSI in a Port Network has a connection to the Main server and the Port Network is available for auto-return… |
| 1.3.6.1.4.1.6889.2.8.1.142.76 | Scalarg3esparmsPNColdresDT | read-only | mandatory | An object containing information about PN Cold Reset Delay Timer |
| 1.3.6.1.4.1.6889.2.8.1.143 | Nodeg3mgrecrule | |||
| 1.3.6.1.4.1.6889.2.8.1.143.1 | Scalarg3mgrecruleTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3mgrecruleTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.143.2 | Scalarg3mgrecruleTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.143.3 | Scalarg3mgrecruleTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.143.4 | Scalarg3mgrecruleTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.143.5 | Scalarg3mgrecruleTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.143.6 | Tableg3mgrecruleTable | not-accessible | mandatory | A list of g3mgrecrule entries. |
| 1.3.6.1.4.1.6889.2.8.1.143.6.1 | Rowg3mgrecruleEntry | not-accessible | mandatory | A g3mgrecrule entry containing objects of the g3mgrecrule information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.143.6.1.1 | Columng3mgrecruleGatewayNbr | read-only | mandatory | An object containing the media gateway number (1-250). |
| 1.3.6.1.4.1.6889.2.8.1.143.6.1.2 | Columng3mgrecruleGatewayName | read-only | mandatory | An object containing the name of the media gateway. |
| 1.3.6.1.4.1.6889.2.8.1.143.6.1.3 | Columng3mgrecruleRecRule | read-only | mandatory | An object containing the recovery rule type that has been selected for the media gateway (possible values are 'immediately', '0-active-calls', 'time-day-window… |
| 1.3.6.1.4.1.6889.2.8.1.144 | Nodeg3commproc | |||
| 1.3.6.1.4.1.6889.2.8.1.144.1 | Scalarg3commprocTage | read-only | mandatory | The number of timeticks since the processor channel data was last extracted from the switch by the Proxy Agent. This object along with the g3commprocTintvl obj… |
| 1.3.6.1.4.1.6889.2.8.1.144.2 | Scalarg3commprocTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the agent. When a GET or GET-NEXT request for the data is… |
| 1.3.6.1.4.1.6889.2.8.1.144.3 | Scalarg3commprocTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.144.4 | Scalarg3commprocTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.144.5 | Scalarg3commprocTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.144.6 | Tableg3commprocTable | not-accessible | mandatory | A list of g3commproc entries. |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1 | Rowg3commprocEntry | not-accessible | mandatory | A g3commproc entry containing objects of the g3commproc information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.1 | Columng3commprocProcChan | read-only | mandatory | An object containing the processor channel (1-384). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.2 | Columng3commprocEnable | read-only | mandatory | An object containing whether the processor channel is enabled (y or n). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.3 | Columng3commprocApplication | read-only | mandatory | An object containing the application type or adjunct connection used on the channel. Allowed values are 'audix', 'dcs', 'echo', 'fp-mwi', 'gateway', 'mis', and… |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.4 | Columng3commprocGatewayTo | read-only | mandatory | An object identifying which processor channel the specific processor channel is serving as a gateway to (1-384 or blank). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.5 | Columng3commprocMode | read-only | mandatory | An object specifying the mode of the IP session (values include 'c' for client, 's' for server, or blank). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.6 | Columng3commprocInterfaceLink | read-only | mandatory | An object that identifies the physical link carrying the processor channel (values include 1-99, 'p' for processor, or blank). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.7 | Columng3commprocInterfaceChan | read-only | mandatory | An object that identifies the channel number of the TCP/IP listen port channel to carry the processor channel (values 1-64 for link type x.25, 0 or 5000-64500 … |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.8 | Columng3commprocDestNode | read-only | mandatory | An object that identifies the server or adjunct at the far end of the link (values include either an adjunct name, server name, far end IP address, node name, … |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.9 | Columng3commprocTempA | read-only | mandatory | An object internally used by the agent for data storage (will always return blank). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.10 | Columng3commprocTempB | read-only | mandatory | An object internally used by the agent for data storage (will always return blank). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.11 | Columng3commprocDestPort | read-only | mandatory | An object that identifies the port number of the destination (values 0 or 5000-64500 where 0 meaning any port can be used). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.12 | Columng3commprocSessionLocal | read-only | mandatory | An object that specifies the local session number (1-384 or blank). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.13 | Columng3commprocSessionRemote | read-only | mandatory | An object that specifies the remote session number (1-384 or blank). |
| 1.3.6.1.4.1.6889.2.8.1.144.6.1.14 | Columng3commprocMachID | read-only | mandatory | An object that identifies the destination server ID defined on the dial plan of the destination server (values 1-99 or blank). |
| 1.3.6.1.4.1.6889.2.8.1.145 | Nodeg3intvl | |||
| 1.3.6.1.4.1.6889.2.8.1.145.1 | Scalarg3intvltrkSleepintvl | read-write | mandatory | Sleep interval to be used between successive ossi requests. The SleepIntvl should be specified in terms of millisecs. Currently this interval will be used for … |
| 1.3.6.1.4.1.6889.2.8.1.145.2 | Scalarg3intvltrkSleepflag | read-write | mandatory | Flag indicating whether sleep is to be induced or not while doing a walk |
| 1.3.6.1.4.1.6889.2.8.1.145.3 | Scalarg3intvlPollingIntvl | read-write | mandatory | A integer value representing the time interval in which the Record would be repopulated. |
| 1.3.6.1.4.1.6889.2.8.1.146 | Nodeg3jitter | |||
| 1.3.6.1.4.1.6889.2.8.1.146.1 | Scalarg3jitterTage | read-only | mandatory | The number of timeticks since the ip voice-stats data was last extracted from the switch by the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.1.146.2 | Scalarg3jitterTintvl | read-write | mandatory | An object containing the interval for which the ip voice stat data extracted from the switch is considered valid by the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.1.146.3 | Scalarg3jitterTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.146.4 | Scalarg3jitterTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.146.5 | Scalarg3jitterTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.146.6 | Tableg3jitterTable | not-accessible | mandatory | A list of g3jitter entries. |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1 | Rowg3jitterEntry | not-accessible | mandatory | A g3jitter entry containing objects of the g3jitter information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.1 | Columng3jitterRegion | read-only | mandatory | An object containing the network region. |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.2 | Columng3jitterBoardNum | read-only | mandatory | An object containing the Medpro Board location information. |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.3 | Columng3jitterCallingNum | read-only | mandatory | An object containing the number of the endpoint initiating the call(near end). |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.4 | Columng3jitterCalledNum | read-only | mandatory | An object containing the number of the endpoint that received the call (far end). |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.5 | Columng3jitterTime | read-only | mandatory | An object containing the time at which the call was made. |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.6 | Columng3jitterAvg | read-only | mandatory | An object containing the average amount of jitter captured for the call. |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.7 | Columng3jitterPeak | read-only | mandatory | An object containing the peak amount of jitter captured for the call. |
| 1.3.6.1.4.1.6889.2.8.1.146.6.1.8 | Columng3jitterExceed | read-only | mandatory | An object containing the type of Voice/Network Statistics exception that occured during the call.It is implied by the type of report and can be either Jitter/P… |
| 1.3.6.1.4.1.6889.2.8.1.147 | Nodeg3pktloss | |||
| 1.3.6.1.4.1.6889.2.8.1.147.1 | Scalarg3pktlossTage | read-only | mandatory | The number of timeticks since the ip voice-stats data was last extracted from the switch by the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.1.147.2 | Scalarg3pktlossTintvl | read-write | mandatory | An object containing the interval for which the ip voice stat data extracted from the switch is considered valid by the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.1.147.3 | Scalarg3pktlossTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.147.4 | Scalarg3pktlossTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.147.5 | Scalarg3pktlossTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache |
| 1.3.6.1.4.1.6889.2.8.1.147.6 | Tableg3pktlossTable | not-accessible | mandatory | A list of g3pktloss entries. |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1 | Rowg3pktlossEntry | not-accessible | mandatory | A g3pktloss entry containing objects of the g3pktloss information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.1 | Columng3pktlossRegion | read-only | mandatory | An object containing the network region. |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.2 | Columng3pktlossBoardNum | read-only | mandatory | An object containing the Medpro Board location information. |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.3 | Columng3pktlossCallingNum | read-only | mandatory | An object containing the the number of the endpoint initiating the call(near end). |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.4 | Columng3pktlossCalledNum | read-only | mandatory | An object containing the number of the endpoint that received the call (far end). |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.5 | Columng3pktlossTime | read-only | mandatory | An object containing the time at which the call was made. |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.6 | Columng3pktlossTotal | read-only | mandatory | An object containing the total number of packets that were lost for the call.If the actual number of packets is greater than what can fit in this field, all 99… |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.7 | Columng3pktlossPercent | read-only | mandatory | An object containing the packet loss for the call,shown as a percentage. |
| 1.3.6.1.4.1.6889.2.8.1.147.6.1.8 | Columng3pktlossExceed | read-only | mandatory | An object containing the type of Voice/Network Statistics exception that occured during the call.It is implied by the type of report and can be either Jitter/P… |
| 1.3.6.1.4.1.6889.2.8.1.148 | Nodeg3rtdelay | |||
| 1.3.6.1.4.1.6889.2.8.1.148.1 | Scalarg3rtdelayTage | read-only | mandatory | The number of timeticks since the ip voice-stats data was last extracted from the switch by the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.1.148.2 | Scalarg3rtdelayTintvl | read-write | mandatory | An object containing the interval for which the ip voice stat data extracted from the switch is considered valid by the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.1.148.3 | Scalarg3rtdelayTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.148.4 | Scalarg3rtdelayTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.148.5 | Scalarg3rtdelayTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.148.6 | Tableg3rtdelayTable | not-accessible | mandatory | A list of g3rtdelay entries. |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1 | Rowg3rtdelayEntry | not-accessible | mandatory | A g3rtdelay entry containing objects of the g3rtdelay information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.1 | Columng3rtdelayRegion | read-only | mandatory | An object containing the network region. |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.2 | Columng3rtdelayBoardNum | read-only | mandatory | An object containing the Medpro Board location information. |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.3 | Columng3rtdelayCallingNum | read-only | mandatory | An object containing the the number of the endpoint initiating the call(near end). |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.4 | Columng3rtdelayCalledNum | read-only | mandatory | An object containing the number of the endpoint that received the call (far end). |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.5 | Columng3rtdelayTime | read-only | mandatory | An object containing the time at which the call was made. |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.6 | Columng3rtdelayAvg | read-only | mandatory | An object containing the average round trip delay for a packets. |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.7 | Columng3rtdelayPeak | read-only | mandatory | An object containing the peak round trip delay captured for the call |
| 1.3.6.1.4.1.6889.2.8.1.148.6.1.8 | Columng3rtdelayExceed | read-only | mandatory | An object containing the type of Voice/Network Statistics exception that occured during the call.It is implied by the type of report and can be either Jitter/P… |
| 1.3.6.1.4.1.6889.2.8.1.149 | Nodeg3esmainsrv | |||
| 1.3.6.1.4.1.6889.2.8.1.149.1 | Scalarg3esmainsrvClusterId | read-only | mandatory | An object containing the unique module id, for the main server from the license file for this cluster. |
| 1.3.6.1.4.1.6889.2.8.1.149.2 | Scalarg3esmainsrvPlatformType | read-only | mandatory | An object containing the platform type (S8500 or S8700). |
| 1.3.6.1.4.1.6889.2.8.1.149.3 | Scalarg3esmainsrvServerAId | read-only | mandatory | An object containing the Server A id field. Acceptable values are 1-999 and it must be unique. |
| 1.3.6.1.4.1.6889.2.8.1.149.4 | Scalarg3esmainsrvServerAIP | read-only | mandatory | An object containing the IP Address for Server A. |
| 1.3.6.1.4.1.6889.2.8.1.149.5 | Scalarg3esmainsrvServerBId | read-only | mandatory | An object containing the Server B id field. Acceptable values are 1-999 and it must be unique (only available if the platform type is S8700). |
| 1.3.6.1.4.1.6889.2.8.1.149.6 | Scalarg3esmainsrvServerBIP | read-only | mandatory | An object containing the IP Address for Server B. |
| 1.3.6.1.4.1.6889.2.8.1.149.7 | Scalarg3esmainsrvPriorityScore | read-only | mandatory | An object containing a numerical value that allows the customer to assign a preferred cluster (can accept values of 1-100; default is blank). |
| 1.3.6.1.4.1.6889.2.8.1.149.8 | Scalarg3esmainsrvNetComm | read-only | mandatory | An object containing the region the ESS cluster is in (used for localization; can have values between 1-64; default is 1). |
| 1.3.6.1.4.1.6889.2.8.1.149.9 | Scalarg3esmainsrvSystemPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service on a system-wide basis (values can b… |
| 1.3.6.1.4.1.6889.2.8.1.149.10 | Scalarg3esmainsrvLocalPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service in the same network community before… |
| 1.3.6.1.4.1.6889.2.8.1.149.11 | Scalarg3esmainsrvLocalOnly | read-only | mandatory | An object containing a flag indicating that only clusters in the same network community can provide service (values can be 'y' or 'n'; default is 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.150 | Nodeg3survprocess | |||
| 1.3.6.1.4.1.6889.2.8.1.150.1 | Scalarg3survprocessTage | read-only | mandatory | The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3esserversTintvl object… |
| 1.3.6.1.4.1.6889.2.8.1.150.2 | Scalarg3survprocessTintvl | read-write | mandatory | An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the d… |
| 1.3.6.1.4.1.6889.2.8.1.150.3 | Scalarg3survprocessTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.150.4 | Scalarg3survprocessTretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refres… |
| 1.3.6.1.4.1.6889.2.8.1.150.5 | Scalarg3survprocessTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.150.6 | Tableg3survprocessTable | not-accessible | mandatory | A list of g3survprocess entries. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1 | Rowg3survprocessEntry | not-accessible | mandatory | A g3survprocess entry containing objects of the g3survprocess information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.1 | Columng3survprocessClusterId | read-only | mandatory | An object containing the unique module id, for the enterprise survivable server, from the license file for this cluster. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.2 | Columng3survprocessPlatformType | read-only | mandatory | An object containing the platform type (S8500 or S8700). |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.3 | Columng3survprocessActvesrvNodeName | read-only | mandatory | An Object containing the name of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.4 | Columng3survprocessActivesrvIP | read-only | mandatory | An object containing the IP Address for Active Server in case of Duplex-ESS. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.5 | Columng3survprocessServerAID | read-only | mandatory | An object containing the server ID of Server A |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.6 | Columng3survprocessServerAnodename | read-only | mandatory | An object containing the nodename of Server A in case of Duplex-ess. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.7 | Columng3survprocessServerAIP | read-only | mandatory | An object containing the IP Address for Server A. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.8 | Columng3survprocessServerBID | read-only | mandatory | An object containing the server ID of Server B |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.9 | Columng3survprocessServerBnodename | read-only | mandatory | An object containing the nodename of Server B in case of Duplex-ess |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.10 | Columng3survprocessServerBIP | read-only | mandatory | An object containing the IP Address for Server B. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.11 | Columng3survprocessSystemPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service on a system-wide basis (values can b… |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.12 | Columng3survprocessPriorityscore | read-only | mandatory | An object containing a numerical value that allows the customer to assign a preferred cluster (can accept values of 1-100; default is blank). |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.13 | Columng3survprocessLocalPref | read-only | mandatory | An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service in the same network community before… |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.14 | Columng3survprocessLocalOnly | read-only | mandatory | An object containing a flag indicating that only clusters in the same network community can provide service (values can be 'y' or 'n'; default is 'n'). |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.15 | Columng3survprocessActvservV6NodeName | read-only | mandatory | An Object containing the IPV6 name of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.16 | Columng3survprocessActivesrvV6IP | read-only | mandatory | An object containing the V6IP Address for Active Server in case of Duplex-ESS. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.17 | Columng3survprocessServerAV6NodeName | read-only | mandatory | An object containing the V6 nodename of Server A in case of Duplex-ess. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.18 | Columng3survprocessServerAV6IP | read-only | mandatory | An object containing the IPV6 Address for Server A. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.19 | Columng3survprocessServerBV6NodeName | read-only | mandatory | An object containing the V6 nodename of ServerB in case of Duplex-ess. |
| 1.3.6.1.4.1.6889.2.8.1.150.6.1.20 | Columng3survprocessServerBV6IP | read-only | mandatory | |
| 1.3.6.1.4.1.6889.2.8.1.151 | Nodeg3nodenameipv4 | |||
| 1.3.6.1.4.1.6889.2.8.1.151.1 | Scalarg3nodenameipv4Tage | read-only | mandatory | The number of timeticks since the node name data was last extracted from the switch by the MVSubAgent. This object along with the g3nodenameintvl object allows… |
| 1.3.6.1.4.1.6889.2.8.1.151.2 | Scalarg3nodenameipv4Tintvl | read-write | mandatory | An object containing the interval for which the node name data extracted from the switch is considered valid by the MVSubAgent. When a GET or GET-NEXT request … |
| 1.3.6.1.4.1.6889.2.8.1.151.3 | Scalarg3nodenameipv4Tdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.151.4 | Scalarg3nodenameipv4Tretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.151.5 | Scalarg3nodenameipv4Tcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.151.6 | Tableg3nodenameipv4Table | not-accessible | mandatory | A list of g3nodenameipv4 entries. |
| 1.3.6.1.4.1.6889.2.8.1.151.6.1 | Rowg3nodenameipv4Entry | not-accessible | mandatory | A g3nodenameipv4 entry containing objects of the g3nodenameipv4 information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.151.6.1.1 | Columng3nodenameipv4Name | read-only | mandatory | This MIB variable displays the names of all the nodes that are administered on the system. |
| 1.3.6.1.4.1.6889.2.8.1.151.6.1.2 | Columng3nodenameipv4Type | read-only | mandatory | An object containing the type of the node. |
| 1.3.6.1.4.1.6889.2.8.1.151.6.1.3 | Columng3nodenameipv4IP | read-only | mandatory | An Object displaying the IPAddress of the node name |
| 1.3.6.1.4.1.6889.2.8.1.152 | Nodeg3nodenameipv6 | |||
| 1.3.6.1.4.1.6889.2.8.1.152.1 | Scalarg3nodenameipv6Tage | read-only | mandatory | The number of timeticks since the node name data was last extracted from the switch by the MVSubAgent. This object along with the g3nodenameintvl object allows… |
| 1.3.6.1.4.1.6889.2.8.1.152.2 | Scalarg3nodenameipv6Tintvl | read-write | mandatory | An object containing the interval for which the node name data extracted from the switch is considered valid by the MVSubAgent. When a GET or GET-NEXT request … |
| 1.3.6.1.4.1.6889.2.8.1.152.3 | Scalarg3nodenameipv6Tdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data. |
| 1.3.6.1.4.1.6889.2.8.1.152.4 | Scalarg3nodenameipv6Tretrieve | read-write | mandatory | An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refre… |
| 1.3.6.1.4.1.6889.2.8.1.152.5 | Scalarg3nodenameipv6Tcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.152.6 | Tableg3nodenameipv6Table | not-accessible | mandatory | A list of g3nodenameipv6 entries. |
| 1.3.6.1.4.1.6889.2.8.1.152.6.1 | Rowg3nodenameipv6Entry | not-accessible | mandatory | A g3nodenameipv6 entry containing objects of the g3nodenameipv6 information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.152.6.1.1 | Columng3nodenameipv6Name | read-only | mandatory | This MIB variable displays the names of all the nodes that are administered on the system. |
| 1.3.6.1.4.1.6889.2.8.1.152.6.1.2 | Columng3nodenameipv6Type | read-only | mandatory | An object containing the type of the node |
| 1.3.6.1.4.1.6889.2.8.1.152.6.1.3 | Columng3nodenameipv6IP | read-only | mandatory | An Object displaying the IPAddress |
| 1.3.6.1.4.1.6889.2.8.1.153 | Nodeg3lspall | |||
| 1.3.6.1.4.1.6889.2.8.1.153.1 | Scalarg3lspallTage | read-only | mandatory | The number of timeticks since the survivable processor |
| 1.3.6.1.4.1.6889.2.8.1.153.2 | Scalarg3lspallTintvl | read-write | mandatory | An object containing the interval for which the data extracted |
| 1.3.6.1.4.1.6889.2.8.1.153.3 | Scalarg3lspallTdelay | read-only | mandatory | An object containing the delay encountered in updating the cached data |
| 1.3.6.1.4.1.6889.2.8.1.153.4 | Scalarg3lspallTretrieve | read-write | mandatory | An INTEGER object containing a flag that is 'update' if the cached |
| 1.3.6.1.4.1.6889.2.8.1.153.5 | Scalarg3lspallTcount | read-only | mandatory | A Gauge object containing the number of data records in the cache. |
| 1.3.6.1.4.1.6889.2.8.1.153.6 | Tableg3lspallTable | not-accessible | mandatory | A list of g3lspall entries. |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1 | Rowg3lspallEntry | not-accessible | mandatory | A g3lspall entry containing objects of the g3lspall information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.1 | Columng3lspallLSP | read-only | mandatory | An INTEGER object containing an index numbering the LSP records |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.2 | Columng3lspallV4NodeName | read-only | mandatory | An object containing the V4 node name of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.3 | Columng3lspallV6NodeName | read-only | mandatory | An object containing the IPV6 node name of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.4 | Columng3lspallIPV4Addr | read-only | mandatory | An object containing the IPV4 address of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.5 | Columng3lspallIPV6Addr | read-only | mandatory | An object containing the IPV6 Address of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.6 | Columng3lspallXlnUpdated | read-only | mandatory | An object containing the date and time of the last translation |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.7 | Columng3lspallNetworkRegion | read-only | mandatory | An object containing the network region of the survivable processor. |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.8 | Columng3lspallType | read-only | mandatory | An object containing the type of the survivable processor (LSP |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.9 | Columng3lspallRegistered | read-only | mandatory | An object indicating whether the survivable processor is |
| 1.3.6.1.4.1.6889.2.8.1.153.6.1.10 | Columng3lspallActive | read-only | mandatory | An object indicating the active state of survivable processor |
| 1.3.6.1.4.1.6889.2.8.1.154 | Nodeg3trunkstaOptions | |||
| 1.3.6.1.4.1.6889.2.8.1.154.1 | Scalarg3trunkstaOptionsBeginAt | read-write | mandatory | An object containing the position to start from. |
| 1.3.6.1.4.1.6889.2.8.1.154.2 | Scalarg3trunkstaOptionsNumTrkGrps | read-write | mandatory | An object stating the Number of Trunk Groups to query. |
| 1.3.6.1.4.1.6889.2.8.1.154.3 | Tableg3trunkstaOptionsTable | not-accessible | mandatory | A list of g3trunkstaOptions entries. |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1 | Rowg3trunkstaOptionsEntry | not-accessible | mandatory | A g3trunkstaOptions entry containing objects of the g3trunkstaOptions information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.1 | Columng3trunkstaOptionsTrunkGroup | read-only | mandatory | An INTEGER Object that uniquely identifies an administered. |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.2 | Columng3trunkstaOptionsMember | read-only | mandatory | An INTEGER Object that uniquely identifies a trunk group member. |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.3 | Columng3trunkstaOptionsServiceState | read-only | mandatory | A DisplayString Object containing the service state of the trunk. |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.4 | Columng3trunkstaOptionsMaintBusy | read-only | mandatory | A DisplayString Object that indicates whether the trunk has been busiedfor maintenance. |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.5 | Columng3trunkstaOptionsConnPort1 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.6 | Columng3trunkstaOptionsConnPort2 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.7 | Columng3trunkstaOptionsConnPort3 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.8 | Columng3trunkstaOptionsConnPort4 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.9 | Columng3trunkstaOptionsConnPort5 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.10 | Columng3trunkstaOptionsConnPort6 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.11 | Columng3trunkstaOptionsConnPort7 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.12 | Columng3trunkstaOptionsConnPort8 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.154.3.1.13 | Columng3trunkstaOptionsConnPort9 | read-only | mandatory | A DisplayString Object that contains the nth port connected |
| 1.3.6.1.4.1.6889.2.8.1.155 | Nodeg3statstaOptions | |||
| 1.3.6.1.4.1.6889.2.8.1.155.1 | Scalarg3statstaOptionsBeginAt | read-write | mandatory | An object containing the position to start from. |
| 1.3.6.1.4.1.6889.2.8.1.155.2 | Scalarg3statstaOptionsNumStations | read-write | mandatory | An object stating the number of stations to query. |
| 1.3.6.1.4.1.6889.2.8.1.155.3 | Tableg3statstaOptionsTable | not-accessible | mandatory | A list of g3statstaOptions entries. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1 | Rowg3statstaOptionsEntry | not-accessible | mandatory | A g3statstaOptions entry containing objects of the g3statstaOptions information sent by the switch. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.1 | Columng3statstaOptionsExtension | read-only | mandatory | A DisplayString Object that uniquely identifies an administered station. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.2 | Columng3statstaOptionsServiceState | read-only | mandatory | A DisplayString Object containing the service state of the station. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.3 | Columng3statstaOptionsMaintBusy | read-only | mandatory | A DisplayString Object that indicates whether the station has been busied for maintenance. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.4 | Columng3statstaOptionsConnPort1 | read-only | mandatory | A DisplayString Object that contains the first port connected to the station. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.5 | Columng3statstaOptionsConnPort2 | read-only | mandatory | |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.6 | Columng3statstaOptionsConnPort3 | read-only | mandatory | |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.7 | Columng3statstaOptionsConnPort4 | read-only | mandatory | |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.8 | Columng3statstaOptionsConnPort5 | read-only | mandatory | |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.9 | Columng3statstaOptionsConnPort6 | read-only | mandatory | |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.10 | Columng3statstaOptionsSACactive | read-only | mandatory | A DisplayString Object that indicates whether SAC has been |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.11 | Columng3statstaOptionsCFdestExt | read-only | mandatory | A DisplayString Object that contains the CF Destination Extension |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.12 | Columng3statstaOptionsRingCutOff | read-only | mandatory | A DisplayString Object that indicates whether Ring Cut Off has been activated for the station. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.13 | Columng3statstaOptionsSerialNbr | read-only | mandatory | A DisplayString Object that contains the serial number for the station. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.14 | Columng3statstaOptionsPartID | read-only | mandatory | A DisplayString Object that contains the part id for the |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.15 | Columng3statstaOptionsSwitchPort | read-only | mandatory | A DisplayString Object that contains the switch port for the station. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.16 | Columng3statstaOptionsSwitchIPAddr | read-only | mandatory | A DisplayString Object that contains the switch-end IP address for the station. |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.17 | Columng3statstaOptionsSwitchIPPort | read-only | mandatory | A DisplayString Object that contains the switch-end IP port nbr for the |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.18 | Columng3statstaOptionsSetIPAddr | read-only | mandatory | A DisplayString Object that contains the set-end IP address for the |
| 1.3.6.1.4.1.6889.2.8.1.155.3.1.19 | Columng3statstaOptionsSetIPPort | read-only | mandatory | A DisplayString Object that contains the set-end IP port nbr for the |
| 1.3.6.1.4.1.6889.2.8.1.250 | Nodeg3busyrls | |||
| 1.3.6.1.4.1.6889.2.8.1.250.1 | Scalarg3busyrlsAction | read-write | mandatory | The last action performed on a specified object. This field must be set in conjunction with the g3busyrlsObject field. |
| 1.3.6.1.4.1.6889.2.8.1.250.2 | Scalarg3busyrlsObject | read-write | mandatory | The object associated with the last action. This field must be set in conjunction with the g3busyrlsTrunkGroup, g3busyrlsTrunkMember, g3busyrlsBoard, and g3bus… |
| 1.3.6.1.4.1.6889.2.8.1.250.3 | Scalarg3busyrlsTrunkGroup | read-write | mandatory | The trunk group number associated with the g3busyrlsObject field. This field is only applicable if the g3busyrlsObject field is set to 'trunk'. |
| 1.3.6.1.4.1.6889.2.8.1.250.4 | Scalarg3busyrlsTrunkMember | read-write | mandatory | The trunk group member associated with the g3busyrlsObject field. This field is only applicable if the g3busyrlsObject field is set to 'trunk'. This field eith… |
| 1.3.6.1.4.1.6889.2.8.1.250.5 | Scalarg3busyrlsBoard | read-write | mandatory | A DisplayString that uniquely identifies a board location (cabinet(01-22):carrier(A-E):slot(01-20)) associated with the g3busyrlsObject field. This field is on… |
| 1.3.6.1.4.1.6889.2.8.1.250.6 | Scalarg3busyrlsPort | read-write | mandatory | The port location associated with the g3busyrlsObject field. This field is only applicable if the g3busyrlsObject field is set to 'board'. This field either co… |
| 1.3.6.1.4.1.6889.2.8.2 | Nodeg3proxmib | |||
| 1.3.6.1.4.1.6889.2.8.2.1 | Nodeg3client | |||
| 1.3.6.1.4.1.6889.2.8.2.1.1 | Tableg3clientTable | not-accessible | mandatory | A list of g3client entries. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1 | Rowg3clientEntry | not-accessible | mandatory | A g3client entry containing objects of the g3client information for the G3 Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.1 | Columng3clientCommunity | read-only | mandatory | A DisplayString Object containing the Community substring for a G3 client. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.2 | Columng3clientCustomerId | read-only | mandatory | A DisplayString Object containing the Customer ID for a G3 client. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.3 | Columng3clientDescription | read-only | mandatory | A DisplayString Object containing the Description for a G3 client. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.4 | Columng3clientExternalName | read-only | mandatory | A DisplayString Object containing the External Name for a G3 client. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.5 | Columng3clientConnectStatus | read-only | mandatory | A DisplayString Object containing the Connection Status for a G3 client. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.6 | Columng3clientSubmapType | read-only | mandatory | The type of submap on which the managed node icon is to be placed on the NMS ('generic' = '0', 'usa' = '1', and 'custom' = '2'). |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.7 | Columng3clientState | read-only | mandatory | An INTEGER object containing a numeric value representing the state in which to place the managed node icon on the NMS if the g3connectSubmapType is set to 'us… |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.8 | Columng3clientSubmapName | read-only | mandatory | A DisplayString Object containing the submap name in which to place the managed node icon on the NMS if g3clientSubmapType is set to 'custom'. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.9 | Columng3clientConnectType | read-only | mandatory | A DisplayString Object containing the Connection Type for a G3 client. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.10 | Columng3clientDynamicTimeout | read-only | mandatory | An INTEGER object containing the number of idle minutes to wait before a dynamic connection is dropped. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.11 | Columng3clientEnumType | read-only | mandatory | The enumerated type of submap on which the managed node icon is to be placed on the NMS. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.12 | Columng3clientEnumState | read-only | mandatory | An INTEGER object containing an enumerated value of the state in which to place the managed node icon on the NMS if the g3connectEnumType is set to 'usa'. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.13 | Columng3clientDialString1 | read-only | mandatory | A DisplayString Object containing the first dial string administered for the managed node. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.14 | Columng3clientDialString2 | read-only | mandatory | A DisplayString Object containing the second dial string administered for the managed node. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.15 | Columng3clientProductID | read-only | mandatory | A DisplayString Object containing the product ID of the managed node. |
| 1.3.6.1.4.1.6889.2.8.2.1.1.1.16 | Columng3clientTableIndex | not-accessible | mandatory | An INTEGER object containing an index numbering the G3 client entry. |
| 1.3.6.1.4.1.6889.2.8.2.2 | Nodeg3agent | |||
| 1.3.6.1.4.1.6889.2.8.2.2.1 | Scalarg3agentSubmapType | read-only | mandatory | A DisplayString object containing a value that indicates the default type of submap used in administering managed node locations ('generic', 'usa', or 'custom'… |
| 1.3.6.1.4.1.6889.2.8.2.2.2 | Scalarg3agentState | read-only | mandatory | A DisplayString object containing a value that indicates the default state used in administering managed node locations if the g3agentSubmapType field is set t… |
| 1.3.6.1.4.1.6889.2.8.2.2.3 | Scalarg3agentSubmapName | read-only | mandatory | A DisplayString Object that contains the default Submap Name used in administering managed node locations if the g3agentSubmapType field is set to 'custom'. |
| 1.3.6.1.4.1.6889.2.8.2.2.4 | Scalarg3agentRelease | read-only | mandatory | A DisplayString object containing the release of the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.2.2.5 | Scalarg3agentDomainName | read-only | mandatory | A DisplayString object containing the Domain Name of the Proxy Agent. |
| 1.3.6.1.4.1.6889.2.8.2.2.6 | Scalarg3agentSnmpPolling | read-only | mandatory | This field identifies whether or not the Proxy Agent is configured to connect to and poll G3, ECS, and MCU node types for data. The value of this field is dete… |
| 1.3.6.1.4.1.6889.2.8.2.2.7 | Scalarg3agentSnmpTraps | read-only | mandatory | This field identifies whether or not the Agent is configured to provide SNMP traps to the NMS. |
| 1.3.6.1.4.1.6889.2.8.2.2.8 | Scalarg3agentSnmpSet | read-only | mandatory | This field identifies whether or not the Proxy Agent is configured to provide the customer with limited ability to perform some maintenance commands on G3, ECS… |
| 1.3.6.1.4.1.6889.2.8.2.2.9 | Scalarg3agentActiveName | read-only | mandatory | A DisplayString object containing the name of the aliased active server. |
| 1.3.6.1.4.1.6889.2.8.2.2.10 | Scalarg3agentActiveIP | read-only | mandatory | A DisplayString object containing the IP address of the aliased active server. |
| 1.3.6.1.4.1.6889.2.8.2.2.11 | Scalarg3agentServer1Name | read-only | mandatory | A DisplayString object containing the name of server 1. |
| 1.3.6.1.4.1.6889.2.8.2.2.12 | Scalarg3agentServer1IP | read-only | mandatory | A DisplayString object containing the IP address of server 1. |
| 1.3.6.1.4.1.6889.2.8.2.2.13 | Scalarg3agentServer1State | read-only | mandatory | This field identifies whether server 1 is currently active or on standby. |
| 1.3.6.1.4.1.6889.2.8.2.2.14 | Scalarg3agentServer2Name | read-only | mandatory | A DisplayString object containing the name of server 2. |
| 1.3.6.1.4.1.6889.2.8.2.2.15 | Scalarg3agentServer2IP | read-only | mandatory | A DisplayString object containing the IP address of server 2. |
| 1.3.6.1.4.1.6889.2.8.2.2.16 | Scalarg3agentServer2State | read-only | mandatory | This field identifies whether server 2 is currently active or on standby. |
| 1.3.6.1.4.1.6889.2.8.2.2.17 | Scalarg3agentCLANIP | read-only | mandatory | A DisplayString object containing the registration IP address for the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig and g3agentEssCo… |
| 1.3.6.1.4.1.6889.2.8.2.2.18 | Scalarg3agentPrim1IP | read-only | mandatory | A DisplayString object containing the file synchronization address for Server A of the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig… |
| 1.3.6.1.4.1.6889.2.8.2.2.19 | Scalarg3agentPrim2IP | read-only | mandatory | A DisplayString object containing the file synchronization address for Server B of the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig… |
| 1.3.6.1.4.1.6889.2.8.2.2.20 | Scalarg3agentServerType | read-only | mandatory | A DisplayString object containing the hardware server type. |
| 1.3.6.1.4.1.6889.2.8.2.2.21 | Scalarg3agentOfferType | read-only | mandatory | A DisplayString object containing the software offer type. |
| 1.3.6.1.4.1.6889.2.8.2.2.22 | Scalarg3agentLspConfig | read-only | mandatory | A DisplayString object indicating whether the switch is configured as an LSP (possible values are 'lsp8700', 'lsp8300', 'icc', and 'unset'). |
| 1.3.6.1.4.1.6889.2.8.2.2.23 | Scalarg3agentEssConfig | read-only | mandatory | A DisplayString object indicating whether the switch is configured as an ESS (possible values are 'ess8700', 'ess8500', 'main', and 'unset'). |
| 1.3.6.1.4.1.6889.2.8.2.2.24 | Scalarg3agentPrim3IP | read-only | mandatory | A DisplayString object containing the file synchronization address for the alternate Server A of the LSP or ESS or blank (dependent on the values set in the g3… |
| 1.3.6.1.4.1.6889.2.8.2.2.25 | Scalarg3agentPrim4IP | read-only | mandatory | A DisplayString object containing the file synchronization address for the alternate Server B of the LSP or ESS or blank (dependent on the values set in the g3… |
| 1.3.6.1.4.1.6889.2.8.2.2.26 | Scalarg3agentStdbyRefresh | read-only | mandatory | A DisplayString object containing the information whether the Standby Server is Refreshed or not and is it ready to go for an interchange. |
| 1.3.6.1.4.1.6889.2.8.2.3 | Nodeg3trap | |||
| 1.3.6.1.4.1.6889.2.8.2.3.1 | Scalarg3trapDestination | read-write | mandatory | A DisplayString Object containing the trap destination IP address. |
| 1.3.6.1.4.1.6889.2.8.2.3.2 | Scalarg3trapFilterNumber | read-write | mandatory | An INTEGER object containing the filter number for the specified trap destination IP address (1-500). |
| 1.3.6.1.4.1.6889.2.8.2.3.3 | Scalarg3trapApplicationID | read-write | mandatory | An INTEGER object containing an ID specifying from which application the filter was administered. This field can take on values of 1-100. IDs 1-50 are reserved… |
| 1.3.6.1.4.1.6889.2.8.2.3.4 | Scalarg3trapOperation | read-write | mandatory | This field indicates whether the alarm filter is to be added or deleted from the set of filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.5 | Scalarg3trapActive | read-write | mandatory | This field indicates whether or not active alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filter… |
| 1.3.6.1.4.1.6889.2.8.2.3.6 | Scalarg3trapResolved | read-write | mandatory | This field indicates whether or not resolved alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filt… |
| 1.3.6.1.4.1.6889.2.8.2.3.7 | Scalarg3trapMajor | read-write | mandatory | This field indicates whether or not major alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.8 | Scalarg3trapMinor | read-write | mandatory | This field indicates whether or not minor alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.9 | Scalarg3trapWarning | read-write | mandatory | This field indicates whether or not warning alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filte… |
| 1.3.6.1.4.1.6889.2.8.2.3.10 | Scalarg3trapInterval | read-only | mandatory | This field indicates the time window for which alarms are to be collected. This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.11 | Scalarg3trapFromMonth | read-only | mandatory | This field indicates the month from which the alarm polling is to begin (1-12). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.12 | Scalarg3trapFromDay | read-only | mandatory | This field indicates the day of the month from which the alarm polling is to begin (1-31). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.13 | Scalarg3trapFromHour | read-only | mandatory | This field indicates the hour of the day from which the alarm polling is to begin (0-23). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.14 | Scalarg3trapFromMinute | read-only | mandatory | This field indicates the minute of the hour from which the alarm polling is to begin (0-59). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.15 | Scalarg3trapToMonth | read-only | mandatory | This field indicates the month from which the alarm polling is to begin (1-12). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.16 | Scalarg3trapToDay | read-only | mandatory | This field indicates the day of the month from which the alarm polling is to begin (1-31). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.17 | Scalarg3trapToHour | read-only | mandatory | This field indicates the hour of the day from which the alarm polling is to begin (0-23). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.18 | Scalarg3trapToMinute | read-only | mandatory | This field indicates the minute of the hour from which the alarm polling is to begin (0-59). This is an old field that is now obsolete. |
| 1.3.6.1.4.1.6889.2.8.2.3.19 | Scalarg3trapMediaGateway | read-write | mandatory | This field indicates the media gateway number (1-250) for alarms to be trapped. This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.20 | Scalarg3trapCabinet | read-write | mandatory | This field indicates the cabinet number (1-64) for alarms to be trapped. This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.21 | Scalarg3trapPortNetwork | read-only | mandatory | This field indicates the port network number (1-64) for alarms to be trapped. This field only applies to CM alarm filters. It is a future place holder. Current… |
| 1.3.6.1.4.1.6889.2.8.2.3.22 | Scalarg3trapBoardNumber | read-write | mandatory | A DisplayString Object containing the board number for alarms to be trapped. This field is of the form cabinet(1-64):carrier(A-E):slot(0-20) or gateway(1-250):… |
| 1.3.6.1.4.1.6889.2.8.2.3.23 | Scalarg3trapPort | read-write | mandatory | A DisplayString Object containing the port number for alarms to be trapped. This field is of the form cabinet(1-64):carrier(A-E):slot(0-20):circuit(1-256) or g… |
| 1.3.6.1.4.1.6889.2.8.2.3.24 | Scalarg3trapCategory | read-write | mandatory | This field contains the alarm category (if applicable). This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.25 | Scalarg3trapMaintenanceObject | read-write | mandatory | This field contains the alarm maintenance object (if applicable). This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.26 | Scalarg3trapExtension | read-write | mandatory | This field indicates the extension number for alarms to be trapped. This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.27 | Scalarg3trapTrunkGroup | read-write | mandatory | This field indicates the trunk group number for alarms to be trapped (1-2000). This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.28 | Scalarg3trapTrunkMember | read-write | mandatory | This field indicates the trunk member with a given trunk group for alarms to be trapped (1-255). This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.29 | Scalarg3trapErrorCode | read-write | mandatory | This field indicates the error code for alarms to be trapped. This field only applies to CM alarm filters. |
| 1.3.6.1.4.1.6889.2.8.2.3.30 | Scalarg3trapAlarmType | read-write | mandatory | This field indicates the alarm type for alarms to be trapped. The allowed values are 'A' for application alarms, '*' for security alarms, 'S' for system alarms… |
| 1.3.6.1.4.1.6889.2.8.2.3.31 | Scalarg3trapAlarmSource | read-write | mandatory | This field contains a string indicating the alarm source to be trapped. The possible values are defined in CM alarm maintenance rules. This field only applies … |
| 1.3.6.1.4.1.6889.2.8.2.3.32 | Scalarg3trapEventID | read-write | mandatory | This field contains an event ID associated with a specific alarm source to be trapped. Possible event ID values are documented in CM maintenance documentation.… |
| 1.3.6.1.4.1.6889.2.8.2.3.33 | Scalarg3trapWarmRestart | read-write | mandatory | This field indicates whether or not WARM restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notifications. |
| 1.3.6.1.4.1.6889.2.8.2.3.34 | Scalarg3trapCold2Restart | read-write | mandatory | This field indicates whether or not COLD2 restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notification… |
| 1.3.6.1.4.1.6889.2.8.2.3.35 | Scalarg3trapCold1Restart | read-write | mandatory | This field indicates whether or not COLD1 restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notification… |
| 1.3.6.1.4.1.6889.2.8.2.3.36 | Scalarg3trapReboot | read-write | mandatory | This field indicates whether or not REBOOT restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notificatio… |
| 1.3.6.1.4.1.6889.2.8.2.3.37 | Scalarg3trapXReboot | read-write | mandatory | This field indicates whether or not XREBOOT restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notificati… |
| 1.3.6.1.4.1.6889.2.8.2.3.38 | Scalarg3trapHotPeiRestart | read-write | mandatory | This field indicates whether or not HOTPEI restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notificatio… |
| 1.3.6.1.4.1.6889.2.8.2.3.39 | Scalarg3trapInterchange | read-write | mandatory | This field indicates whether or not only restarts involving a interchange are to have traps generated. It can take on the values 'y' (only restarts involving a… |
| 1.3.6.1.4.1.6889.2.8.2.3.40 | Scalarg3trapCraftInitiated | read-write | mandatory | This field indicates whether or not restarts that are craft initiated are to have traps generated. It can take on the vaules 'y' (only craft initiated restarts… |
| 1.3.6.1.4.1.6889.2.8.2.3.41 | Scalarg3trapFilterType | read-write | mandatory | This field indicates the type of the filter. It is defaulted to a value of 'cm-alarm' if the user does not specify a filter type when adding a new filter. |
| 1.3.6.1.4.1.6889.2.8.2.4 | Nodeg3filter | |||
| 1.3.6.1.4.1.6889.2.8.2.4.1 | Scalarg3filterFilterStatus | read-write | mandatory | This field indicates the state of alarm trap filter table. A value of 'current' indicates that the set of alarm filters are up-to-date and active and that no f… |
| 1.3.6.1.4.1.6889.2.8.2.4.2 | Tableg3filterTable | not-accessible | mandatory | A list of g3filter entries. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1 | Rowg3filterEntry | not-accessible | mandatory | A g3filter entry containing objects of the active filter information for CM alarms stored in the SNMP agent. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.1 | Columng3filterDestination | read-only | mandatory | A DisplayString Object containing the trap destination IP address. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.2 | Columng3filterFilterNumber | read-only | mandatory | An INTEGER object containing the filter number for the specified trap destination IP address. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.3 | Columng3filterApplicationID | read-only | mandatory | An INTEGER object containing the application ID that administered the alarm filter. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.4 | Columng3filterActive | read-only | mandatory | This field indicates whether or not active alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.5 | Columng3filterResolved | read-only | mandatory | This field indicates whether or not resolved alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.6 | Columng3filterMajor | read-only | mandatory | This field indicates whether or not major alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.7 | Columng3filterMinor | read-only | mandatory | This field indicates whether or not minor alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.8 | Columng3filterWarning | read-only | mandatory | This field indicates whether or not warning alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.9 | Columng3filterMediaGateway | read-only | mandatory | This field indicates the media gateway number (1-250) for alarms to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.10 | Columng3filterCabinet | read-only | mandatory | This field indicates the cabinet number (1-64) for alarms to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.11 | Columng3filterPortNetwork | read-only | mandatory | This field indicates the port network number (1-64) for alarms to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.12 | Columng3filterBoardNumber | read-only | mandatory | This field indicates the board location for alarms are to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.13 | Columng3filterPort | read-only | mandatory | This field indicates the port location for alarms are to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.14 | Columng3filterCategory | read-only | mandatory | This field indicates the alarm category for alarms are to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.15 | Columng3filterMaintenanceObject | read-only | mandatory | This field indicates the maintenance object name for alarms are to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.16 | Columng3filterExtension | read-only | mandatory | This field indicates the extension number for alarms are to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.17 | Columng3filterTrunkGroup | read-only | mandatory | This field indicates the trunk group number for alarms are to be trapped (1-2000). |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.18 | Columng3filterTrunkMember | read-only | mandatory | This field indicates the trunk member with a given trunk group for alarms are to be trapped (1-255). |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.19 | Columng3filterErrorCode | read-only | mandatory | This field indicates the error code for alarms are to be trapped. |
| 1.3.6.1.4.1.6889.2.8.2.4.2.1.20 | Columng3filterTableIndex | not-accessible | mandatory | An INTEGER object containing an index numbering the filter entry. |
| 1.3.6.1.4.1.6889.2.8.2.4.3 | Scalarg3filterApplication | read-write | mandatory | An INTEGER object containing an ID specifying from which application filtering was administered. This field can take on values of 1-100. IDs 1-50 are reserved … |
| 1.3.6.1.4.1.6889.2.8.2.4.4 | Scalarg3filterTrapTest | read-write | mandatory | An INTEGER object specifying whether test trap generation is enabled or disabled. This field can be set to 1 to enable test trap generation.By default it is se… |
| 1.3.6.1.4.1.6889.2.8.2.5 | Nodeg3maintobj | |||
| 1.3.6.1.4.1.6889.2.8.2.5.1 | Tableg3maintobjTable | not-accessible | mandatory | A list of g3maintobj entries. |
| 1.3.6.1.4.1.6889.2.8.2.5.1.1 | Rowg3maintobjEntry | not-accessible | mandatory | A g3maintobj entry containing a CM maintenance object string. |
| 1.3.6.1.4.1.6889.2.8.2.5.1.1.1 | Columng3maintobjMOname | read-only | mandatory | A DisplayString Object containing a CM maintenance object string. |
| 1.3.6.1.4.1.6889.2.8.2.5.1.1.2 | Columng3maintobjTableIndex | not-accessible | mandatory | An INTEGER object containing an index numbering the maintenance object entry. |
| 1.3.6.1.4.1.6889.2.8.2.6 | Nodeg3category | |||
| 1.3.6.1.4.1.6889.2.8.2.6.1 | Tableg3categoryTable | not-accessible | mandatory | A list of g3category entries. |
| 1.3.6.1.4.1.6889.2.8.2.6.1.1 | Rowg3categoryEntry | not-accessible | mandatory | A g3category entry containing a CM alarm category and list of maintenance objects associated with the category. |
| 1.3.6.1.4.1.6889.2.8.2.6.1.1.1 | Columng3categoryCategory | read-only | mandatory | A DisplayString Object containing a CM alarm category string. |
| 1.3.6.1.4.1.6889.2.8.2.6.1.1.2 | Columng3categoryMOName | read-only | mandatory | A DisplayString Object containing a CM maintenance object name. |
| 1.3.6.1.4.1.6889.2.8.2.6.1.1.3 | Columng3categoryTableIndex | not-accessible | mandatory | An INTEGER object containing an index numbering the category entry. |
| 1.3.6.1.4.1.6889.2.8.2.7 | Nodeg3platsrc | |||
| 1.3.6.1.4.1.6889.2.8.2.7.1 | Tableg3platsrcTable | not-accessible | mandatory | A list of g3platsrc entries. |
| 1.3.6.1.4.1.6889.2.8.2.7.1.1 | Rowg3platsrcEntry | not-accessible | mandatory | A g3platsrc entry containing a platform alarm source. |
| 1.3.6.1.4.1.6889.2.8.2.7.1.1.1 | Columng3platsrcSource | read-only | mandatory | A DisplayString Object containing a platform alarm source string. |
| 1.3.6.1.4.1.6889.2.8.2.7.1.1.2 | Columng3platsrcTableIndex | not-accessible | mandatory | An INTEGER object containing an index numbering the alarm source entry. |
| 1.3.6.1.4.1.6889.2.8.2.8 | Nodeg3platfilt | |||
| 1.3.6.1.4.1.6889.2.8.2.8.1 | Tableg3platfiltTable | not-accessible | mandatory | A list of g3platfilt entries. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1 | Rowg3platfiltEntry | not-accessible | mandatory | A g3platfilt entry containing objects of the active filter information for platform alarms stored in the SNMP agent. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.1 | Columng3platfiltDestination | read-only | mandatory | A DisplayString Object containing the trap destination IP address. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.2 | Columng3platfiltFilterNumber | read-only | mandatory | An INTEGER object containing the platfilt number for the specified trap destination IP address. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.3 | Columng3platfiltApplicationID | read-only | mandatory | An INTEGER object containing the application ID that administered the alarm filter. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.4 | Columng3platfiltActive | read-only | mandatory | This field indicates whether or not active alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.5 | Columng3platfiltResolved | read-only | mandatory | This field indicates whether or not resolved alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.6 | Columng3platfiltMajor | read-only | mandatory | This field indicates whether or not major alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.7 | Columng3platfiltMinor | read-only | mandatory | This field indicates whether or not minor alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.8 | Columng3platfiltWarning | read-only | mandatory | This field indicates whether or not warning alarms are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.9 | Columng3platfiltAlarmType | read-only | mandatory | This field indicates the alarm type for alarms to be trapped. The allowed values are 'A' for application alarms, '*' for security alarms, 'S' for system alarms… |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.10 | Columng3platfiltAlarmSource | read-only | mandatory | This field contains a string indicating the alarm source to be trapped. The possible values are defined in CM alarm maintenance rules. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.11 | Columng3platfiltEventID | read-only | mandatory | This field contains an event ID associated with a specific alarm source to be trapped. Possible event ID values are documented in CM maintenance documentation. |
| 1.3.6.1.4.1.6889.2.8.2.8.1.1.12 | Columng3platfiltTableIndex | not-accessible | mandatory | An INTEGER object containing an index numbering the filter entry. |
| 1.3.6.1.4.1.6889.2.8.2.9 | Nodeg3rstfilt | |||
| 1.3.6.1.4.1.6889.2.8.2.9.1 | Tableg3rstfiltTable | not-accessible | mandatory | A list of g3rstfilt entries. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1 | Rowg3rstfiltEntry | not-accessible | mandatory | A g3rstfilt entry containing objects of the active filter information for system restart notifications stored in the SNMP agent. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.1 | Columng3rstfiltDestination | read-only | mandatory | A DisplayString Object containing the trap destination IP address. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.2 | Columng3rstfiltFilterNumber | read-only | mandatory | An INTEGER object containing the rstfilt number for the specified trap destination IP address. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.3 | Columng3rstfiltApplicationID | read-only | mandatory | An INTEGER object containing the application ID that administered the alarm filter. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.4 | Columng3rstfiltWarmRestart | read-only | mandatory | This field indicates whether or not WARM restarts are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.5 | Columng3rstfiltCold2Restart | read-only | mandatory | This field indicates whether or not COLD2 restarts are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.6 | Columng3rstfiltCold1Restart | read-only | mandatory | This field indicates whether or not COLD1 restarts are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.7 | Columng3rstfiltReboot | read-only | mandatory | This field indicates whether or not REBOOT restarts are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.8 | Columng3rstfiltXReboot | read-only | mandatory | This field indicates whether or not XREBOOT restarts are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.9 | Columng3rstfiltHotPeiRestart | read-only | mandatory | This field indicates whether or not HOTPEI restarts are to have traps generated. |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.10 | Columng3rstfiltInterchange | read-only | mandatory | This field indicates whether or not restarts involving a interchange are to have traps generated. A value of 'y' indicates that only restarts involving an inte… |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.11 | Columng3rstfiltCraftInitiated | read-only | mandatory | This field indicates whether or restarts that are craft initiated are to have traps generated. A value of 'y' indicates that a trap would be generated only if … |
| 1.3.6.1.4.1.6889.2.8.2.9.1.1.12 | Columng3rstfiltTableIndex | not-accessible | mandatory | An INTEGER object containing an index numbering the filter entry. |