G6-DHCP-MIB
69 objects
Microsens private MIB for Generation 6 Ethernet Switches
Imported Objects
| MICROSENS-G6-MIB | g6 |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3181.10.6.2 | Identityprotocol | Microsens private MIB for Generation 6 Ethernet Switches | ||
| 1.3.6.1.4.1.3181.10.6.2.49 | Nodedhcp | |||
| 1.3.6.1.4.1.3181.10.6.2.49.1 | ScalardhcpEnableDhcpRelay | read-write | current | General enable of dhcp relay function. |
| 1.3.6.1.4.1.3181.10.6.2.49.2 | ScalardhcpEnableDhcpSnooping | read-write | current | General enable of dhcp snooping function. |
| 1.3.6.1.4.1.3181.10.6.2.49.3 | ScalardhcpEnablePppoeSnooping | read-write | current | General enable of PPPoE snooping also known as PPPoE Intermediate Agent function. |
| 1.3.6.1.4.1.3181.10.6.2.49.4 | ScalardhcpEnableArpInspection | read-write | current | General enable of arp inspection function. |
| 1.3.6.1.4.1.3181.10.6.2.49.5 | ScalardhcpUnblockPort | read-write | current | This function may be used to unblock a port that has been set to blocking state due to DHCP flooding or due to ARP storm detection. The shorthand port format l… |
| 1.3.6.1.4.1.3181.10.6.2.49.6 | ScalardhcpClearSnoopingTable | read-write | current | This function may be used to clear the content of the DHCP snooping table. |
| 1.3.6.1.4.1.3181.10.6.2.49.7 | TablerelayConfigTable | not-accessible | current | This configures the DHCP relay option 82. It can be used to supply information from which port a DHCP request came in order to supply an IP based on the physic… |
| 1.3.6.1.4.1.3181.10.6.2.49.7.1 | RowrelayConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.7.1.1 | ColumnrelayConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.7.1.2 | ColumnrelayConfigDhcpServerAddress | read-write | current | Defines host address or network address where the dhcp server(s) resides. Also known as ip_helper_address. |
| 1.3.6.1.4.1.3181.10.6.2.49.7.1.3 | ColumnrelayConfigRemoteIdSource | read-write | current | Defines how the switch is identified when DHCP option 82 is used. (Suboption2) |
| 1.3.6.1.4.1.3181.10.6.2.49.7.1.4 | ColumnrelayConfigCustomRemoteId | read-write | current | This remote id is used for option 82 when 'remote_id_source' is set to USER_DEFINED. |
| 1.3.6.1.4.1.3181.10.6.2.49.7.1.5 | ColumnrelayConfigCircuitIdSource | read-write | current | Defines how the ports are identified when option 82 is used. (Suboption1) |
| 1.3.6.1.4.1.3181.10.6.2.49.8 | TablerelayPortConfigTable | not-accessible | current | This configures the DHCP relay option 82. It can be used to supply information from which port a DHCP request came in order to supply an IP based on the physic… |
| 1.3.6.1.4.1.3181.10.6.2.49.8.1 | RowrelayPortConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.8.1.1 | ColumnrelayPortConfigPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.8.1.2 | ColumnrelayPortConfigEnableDhcpRelay | read-write | current | When enabled incoming DHCP requests are redirected to the dhcp server or network specified in 'dhcp.relay_config' |
| 1.3.6.1.4.1.3181.10.6.2.49.8.1.3 | ColumnrelayPortConfigEnableOption82 | read-write | current | When enabled incoming DHCP requests are modified in 'dhcp.relay_config' |
| 1.3.6.1.4.1.3181.10.6.2.49.9 | TablesnoopingPortConfigTable | not-accessible | current | This configures the DHCP snooping function. DHCP snooping acts like a DHCP firewall between access and link ports. When enabled it ensures that for untrusted p… |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1 | RowsnoopingPortConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.1 | ColumnsnoopingPortConfigPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.2 | ColumnsnoopingPortConfigEnableDhcpSnooping | read-write | current | This enables the DHCP snooping function per port. |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.3 | ColumnsnoopingPortConfigDhcpFiltering | read-write | current | DHCP filtering prevents DHCP responses being injected from a local access port. It acts like a DHCP firewall between access and link ports. |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.4 | ColumnsnoopingPortConfigSnoopingTrust | read-write | current | DHCP responses are only accepted when they ingress on a trusted port. Typically these are the link ports. AUTO uses the port role and declares all up or downli… |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.5 | ColumnsnoopingPortConfigAcceptIngressOption82 | read-write | current | Normally incoming DHCP request incoming with Option 82 set will be discarded. When enabled then this check is ignored. |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.6 | ColumnsnoopingPortConfigMacAddressVerification | read-write | current | When a packet is received on an untrusted interface, and the source MAC address and the DHCP client MAC address do not match and this feature is enabled, the p… |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.7 | ColumnsnoopingPortConfigDhcpRateLimiting | read-write | current | Defines how many DHCP request are accepted per second. When the limit is reached, DHCP flooding is assumed and the port is blocked. The value 0 disables the ra… |
| 1.3.6.1.4.1.3181.10.6.2.49.9.1.8 | ColumnsnoopingPortConfigClearSnoopingStatistics | read-write | current | Reset all DHCP related statistics and reason. The snooping binding table is not affected. |
| 1.3.6.1.4.1.3181.10.6.2.49.10 | TablepppoeConfigTable | not-accessible | current | This table defines the general parameter for PPPoE Intermediate Agent feature. |
| 1.3.6.1.4.1.3181.10.6.2.49.10.1 | RowpppoeConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.10.1.1 | ColumnpppoeConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.10.1.2 | ColumnpppoeConfigVendorId | read-write | current | Vendor identification that this device adds to a PPPoE request before forwarding it to the server. |
| 1.3.6.1.4.1.3181.10.6.2.49.10.1.3 | ColumnpppoeConfigRemoteIdSource | read-write | current | The remote id identifies the client that requests a PPPoE connection. |
| 1.3.6.1.4.1.3181.10.6.2.49.10.1.4 | ColumnpppoeConfigCustomRemoteId | read-write | current | This field is only used in a PPPoE request when the remote_id_source is set to USER_DEFINED. |
| 1.3.6.1.4.1.3181.10.6.2.49.10.1.5 | ColumnpppoeConfigCircuitIdSource | read-write | current | This field defines how the port on which a PPPoE request comes in is identified. |
| 1.3.6.1.4.1.3181.10.6.2.49.11 | TablepppoePortConfigTable | not-accessible | current | This table permits port specific enable of the PPPoE Intermediate Agent feature. |
| 1.3.6.1.4.1.3181.10.6.2.49.11.1 | RowpppoePortConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.11.1.1 | ColumnpppoePortConfigPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.11.1.2 | ColumnpppoePortConfigEnablePppoeSnooping | read-write | current | Enables PPPoE intermediate agent function also known as PPPoE Snooping for this port. Also observe the general enable parameter for PPPoE. |
| 1.3.6.1.4.1.3181.10.6.2.49.12 | TablearpInspectionPortConfigTable | not-accessible | current | This table defines the parameter for Dynamic ARP Inspection per port. These features should generally be used with untrusted ports. |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1 | RowarpInspectionPortConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.1 | ColumnarpInspectionPortConfigPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.2 | ColumnarpInspectionPortConfigEnableArpInspection | read-write | current | Generally enables Dynamic ARP Inspection. The details need to be configured per VLAN in separate table. This feature helps preventing from man-in-the-middle at… |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.3 | ColumnarpInspectionPortConfigArpRateLimiting | read-write | current | Defines how many ARP request are accepted per second. When the limit is reached, a DOS attack is assumed and the port is shut down. The value 0 disables the ra… |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.4 | ColumnarpInspectionPortConfigInspectionDatabase | read-write | current | When set to another value than NONE, the MAC-IP relationship of the incoming ARPs is verified against the selected table. This ensures that only valid MACs ent… |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.5 | ColumnarpInspectionPortConfigArpAclName | read-write | current | Name of the ACL (access control list) which declares which IP/MAC relations are acceptible. Note: ACLs are configured under Management.ACL. Several ACL may be … |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.6 | ColumnarpInspectionPortConfigAclDefaultLogic | read-write | current | Defines which action is taken when none of the ACL records matches. Default is deny which blocks the ARP. |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.7 | ColumnarpInspectionPortConfigSourceMacValidation | read-write | current | Checks the source MAC address in the Ethernet header against the sender MAC address in the ARP body. This check is performed on both ARP requests and responses… |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.8 | ColumnarpInspectionPortConfigDestMacValidation | read-write | current | Checks the destination MAC address in the Ethernet header against the target MAC address in ARP body. This check is performed for ARP responses. Packets with d… |
| 1.3.6.1.4.1.3181.10.6.2.49.12.1.9 | ColumnarpInspectionPortConfigIpRangeValidation | read-write | current | Checks ARP for invalid addresses. Invalid addresses include 0.0.0.0, 255.255.255.255, and all IP multicast and loopback addresses. Sender IP addresses are chec… |
| 1.3.6.1.4.1.3181.10.6.2.49.100 | TablesnoopingStatisticsTable | not-accessible | current | Statistics indicating activity of DHCP snooping. |
| 1.3.6.1.4.1.3181.10.6.2.49.100.1 | RowsnoopingStatisticsEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.100.1.1 | ColumnsnoopingStatisticsPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.100.1.2 | ColumnsnoopingStatisticsTrustMode | read-only | current | Reflects the determined trust mode. |
| 1.3.6.1.4.1.3181.10.6.2.49.100.1.3 | ColumnsnoopingStatisticsNumberOfDhcpProcessed | read-only | current | Counts the number of dhcp messages processed. |
| 1.3.6.1.4.1.3181.10.6.2.49.100.1.4 | ColumnsnoopingStatisticsNumberOfDhcpDropped | read-only | current | Counts the number of dhcp messages dropped. |
| 1.3.6.1.4.1.3181.10.6.2.49.100.1.5 | ColumnsnoopingStatisticsLastDropReason | read-only | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.101 | TablesnoopingTableTable | not-accessible | current | This table lists the MAC-IP bindings of the untrusted ports (only) as discovered through DHCP snooping. |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1 | RowsnoopingTableEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.1 | ColumnsnoopingTableIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.2 | ColumnsnoopingTableMac | read-only | current | MAC address entry |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.3 | ColumnsnoopingTableIp | read-only | current | IP address associated with this MAC. |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.4 | ColumnsnoopingTablePort | read-only | current | Port number for MAC address |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.5 | ColumnsnoopingTableVlan | read-only | current | if non zero this MAC is part of this VLAN. |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.6 | ColumnsnoopingTableLastUpdated | read-only | current | Time stamp when this record was written |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.7 | ColumnsnoopingTableLastUpdatedEpoch | read-only | current | Time stamp in alternate format |
| 1.3.6.1.4.1.3181.10.6.2.49.101.1.8 | ColumnsnoopingTableLeaseTime | read-only | current | Lease time as reported by DHCP server |