G6-IGMP-MIB
58 objects
Microsens private MIB for Generation 6 Ethernet Switches
Imported Objects
| MICROSENS-G6-MIB | g6 |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3181.10.6.2 | Identityprotocol | Microsens private MIB for Generation 6 Ethernet Switches | ||
| 1.3.6.1.4.1.3181.10.6.2.40 | Nodeigmp | |||
| 1.3.6.1.4.1.3181.10.6.2.40.1 | ScalarigmpEnableIgmpSnooping | read-write | current | General enable of the IGMP snooping function. When disabled all IGMP snooping in all VLANs is disabled as well. |
| 1.3.6.1.4.1.3181.10.6.2.40.2 | ScalarigmpEnableMldSnooping | read-write | current | General enable of the MLD snooping function. When disabled all MLD snooping in all VLANs is disabled as well. |
| 1.3.6.1.4.1.3181.10.6.2.40.3 | ScalarigmpShowMulticastForVlan | read-write | current | Filter MAC table to show only multicast MACs associated with a given VLAN range. Supply VLAN ID as parameter. Syntax example: igmp.show_multicast_for_vlan = 1-… |
| 1.3.6.1.4.1.3181.10.6.2.40.4 | ScalarigmpShowMulticastForPort | read-write | current | Filter MAC table to show only multicast MACs associated with a given port range. Supply port as parameter. The shorthand port format like 1 for 1/1 may be used… |
| 1.3.6.1.4.1.3181.10.6.2.40.5 | TableconfigTable | not-accessible | current | This table defines IGMP snooping parameter per VLAN. The table entries are referenced by VLAN ID and must match corresponding VLAN filter entires defined under… |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1 | RowconfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.1 | ColumnconfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.2 | ColumnconfigVlanId | read-write | current | Defines IGMP snooping table entry associated with this VLAN ID. This is the key value for the table.VLAN ID 0 is used to define the IGMP settings when VLANs ar… |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.3 | ColumnconfigEnableIgmpSnooping | read-write | current | Enable IGMP (IPv4) snooping for this particular VLAN. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.4 | ColumnconfigEnableMldSnooping | read-write | current | Enable MLD (IPv6) snooping for this particular VLAN. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.5 | ColumnconfigSnoopingPorts | read-write | current | This parameter permits port selective IGMP/MLD snooping enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick set… |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.6 | ColumnconfigStaticRouterPorts | read-write | current | When set corresponding ports will be marked as static router ports. Upon default no ports will be marked. Syntax: slot/port, slot/port or use hex value for qui… |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.7 | ColumnconfigMulticastRouterDetection | read-write | current | Defines the mode for detecting the router port. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.8 | ColumnconfigEnableReportAggregation | read-write | current | When enabled limits the number of reports received from same subnet to be transmitted only once to the router. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.9 | ColumnconfigEnableFloodingUnregisterPkt | read-write | current | When enabled unregistered multicast streams are flooded on all ports (which are member of the source VLAN of this stream). When disabled unregistered multicast… |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.10 | ColumnconfigMcastGroupLimit | read-write | current | Indicates the number of multicast groups in the table. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.11 | ColumnconfigGroupMembershipInterval | read-write | current | IGMP group_membership_interval time in seconds. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.12 | ColumnconfigMaxResponseTime | read-write | current | IGMP response time in seconds. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.13 | ColumnconfigEnableFastLeave | read-write | current | Enables the software to remove the multicast group when it receives an IGMP leave report without first sending an IGMP query message to check if other users st… |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.14 | ColumnconfigLastMemberQueryTime | read-write | current | Sets the interval in seconds that the software waits after sending an IGMP query to verify that no hosts that want to receive a particular multicast group to r… |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.15 | ColumnconfigNeighborDeadInterval | read-write | current | IGMP neighbor dead interval in seconds in case of router_discovery mode. |
| 1.3.6.1.4.1.3181.10.6.2.40.5.1.16 | ColumnconfigRouterAgingTime | read-write | current | IGMP router aging time in seconds. |
| 1.3.6.1.4.1.3181.10.6.2.40.6 | TablestaticMulticastGroupsTable | not-accessible | current | This table may be used to enter the multicast addresses of other protocols beside IGMP, that need to be forwarded when IGMP snooping is enabled. This can be us… |
| 1.3.6.1.4.1.3181.10.6.2.40.6.1 | RowstaticMulticastGroupsEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.40.6.1.1 | ColumnstaticMulticastGroupsIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.40.6.1.2 | ColumnstaticMulticastGroupsName | read-write | current | Unique name to reference this entry and to remember whose MAC address is entered. |
| 1.3.6.1.4.1.3181.10.6.2.40.6.1.3 | ColumnstaticMulticastGroupsDescription | read-write | current | Enter any information required to remember what this rule is intended to do. |
| 1.3.6.1.4.1.3181.10.6.2.40.6.1.4 | ColumnstaticMulticastGroupsMulticastMac | read-write | current | MAC address entry. |
| 1.3.6.1.4.1.3181.10.6.2.40.6.1.5 | ColumnstaticMulticastGroupsForwardingPortMask | read-write | current | Enter the ports to which this multicast should be forwarded. A value of 0 disables this entry. Syntax: slot/port, slot/port or use hex value for quick setup. E… |
| 1.3.6.1.4.1.3181.10.6.2.40.6.1.6 | ColumnstaticMulticastGroupsVlanId | read-write | current | VLAN on which the packets is entering. |
| 1.3.6.1.4.1.3181.10.6.2.40.100 | TablestatusTable | not-accessible | current | This table contains operational counters of the IGMP snooping module. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1 | RowstatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.1 | ColumnstatusIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.2 | ColumnstatusIgmpRouterPorts | read-only | current | Displays the igmp router ports list |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.3 | ColumnstatusRxGeneralQueries | read-only | current | Displays the number of received general queries. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.4 | ColumnstatusRxGroupQueries | read-only | current | Displays the number of received group queries. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.5 | ColumnstatusRxReports | read-only | current | Displays the number of received report messages. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.6 | ColumnstatusRxLeaves | read-only | current | Displays the number of received leave messages. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.7 | ColumnstatusRxAdvertisements | read-only | current | Displays the number of received advertisements. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.8 | ColumnstatusRxTerminations | read-only | current | Displays the number of received terminations. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.9 | ColumnstatusRxUnsupported | read-only | current | Displays the number of received unsupported messages. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.10 | ColumnstatusRxErrors | read-only | current | Displays the number of received error packets. |
| 1.3.6.1.4.1.3181.10.6.2.40.100.1.11 | ColumnstatusTxSolicitations | read-only | current | Displays the number of transmitted solicitation messges. |
| 1.3.6.1.4.1.3181.10.6.2.40.101 | TablemldStatusTable | not-accessible | current | This table contains operational counters of the MLD snooping module. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1 | RowmldStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.1 | ColumnmldStatusIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.2 | ColumnmldStatusMldRouterPorts | read-only | current | Displays the igmp router ports list |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.3 | ColumnmldStatusRxGeneralQueries | read-only | current | Displays the number of received general queries. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.4 | ColumnmldStatusRxGroupQueries | read-only | current | Displays the number of received group queries. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.5 | ColumnmldStatusRxReports | read-only | current | Displays the number of received report messages. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.6 | ColumnmldStatusRxLeaves | read-only | current | Displays the number of received leave messages. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.7 | ColumnmldStatusRxAdvertisements | read-only | current | Displays the number of received advertisements. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.8 | ColumnmldStatusRxTerminations | read-only | current | Displays the number of received terminations. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.9 | ColumnmldStatusRxUnsupported | read-only | current | Displays the number of received unsupported messages. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.10 | ColumnmldStatusRxErrors | read-only | current | Displays the number of received error packets. |
| 1.3.6.1.4.1.3181.10.6.2.40.101.1.11 | ColumnmldStatusTxSolicitations | read-only | current | Displays the number of transmitted solicitation messges. |