G6-LLDP-MIB
155 objects
Microsens private MIB for Generation 6 Ethernet Switches
Imported Objects
| MICROSENS-G6-MIB | g6 |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3181.10.6.2 | Identityprotocol | Microsens private MIB for Generation 6 Ethernet Switches | ||
| 1.3.6.1.4.1.3181.10.6.2.43 | Nodelldp | |||
| 1.3.6.1.4.1.3181.10.6.2.43.1 | TableconfigTable | not-accessible | current | General settings for LLDP (link layer discovery protocol). This protocol is used to identify the directly attached neighbor devices. This is useful to build a … |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1 | RowconfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.1 | ColumnconfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.2 | ColumnconfigEnableLldp | read-write | current | This generally enables the link layer discovery protocol (LLDP). |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.3 | ColumnconfigEnableCdp | read-write | current | This enables Cisco discovery protocol. Check cdp_version parameter to select CDP version. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.4 | ColumnconfigLldpEnabledPorts | read-write | current | This parameter permits port selective LLDP enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example =… |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.5 | ColumnconfigReceiveOnly | read-write | current | This enables receive only mode. LLDP will not send any frames. It will only listen to its neighbours. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.6 | ColumnconfigForwardToLink | read-write | current | This mode forwards all received LLDP packets to the uplink port. In combination with receive_only option enabled this unit keeps quiet and all LLDP handling sh… |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.7 | ColumnconfigAdvertizedMedClass | read-write | current | Enables emission of LLDP-MED frames of a certain class. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.8 | ColumnconfigDisableMedInventory | read-write | current | Disable LLDP-MED inventory TLV transmission. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.9 | ColumnconfigDisableVoiceVlanTlv | read-write | current | Disable voice vlan indication TLV transmission. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.10 | ColumnconfigCdpVersion | read-write | current | Determines which version CDP messages are used. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.11 | ColumnconfigVoiceVlanPrio | read-write | current | Layer 2 priority used for voice vlan in voip application. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.12 | ColumnconfigVoiceVlanSignalPrio | read-write | current | Layer 2 priority used for voice vlan signaling in voip application. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.13 | ColumnconfigVoiceDscp | read-write | current | DiffServ codepoint (0-63) for voip application |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.14 | ColumnconfigSignalingDscp | read-write | current | DiffServ codepoint (0-63) for voip signaling |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.15 | ColumnconfigTimeToLive | read-write | current | The time to live value defines the time for which the lldp transmitted details are valid and can be displayed in the status. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.16 | ColumnconfigTxDelay | read-write | current | Transmission delay in seconds between successive LLDP frame transmissions initiated by changes in the LLDP local configuration. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.17 | ColumnconfigMsgTxInterval | read-write | current | The interval at which LLDP frames are transmitted on behalf of this LLDP agent. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.18 | ColumnconfigForceLldpTransmission | read-write | current | Force to send LLDP packets even when there is no LLDP peer detected. |
| 1.3.6.1.4.1.3181.10.6.2.43.1.1.19 | ColumnconfigLldpResponsePreferred | read-write | current | When enabled LLDP responses takes precende over CDP protocol responses. |
| 1.3.6.1.4.1.3181.10.6.2.43.2 | TablelocalCoordinatesTable | not-accessible | current | Detailed GPS information about the pysical location of this device may be entered here. |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1 | RowlocalCoordinatesEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.1 | ColumnlocalCoordinatesIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.2 | ColumnlocalCoordinatesLatitude | read-write | current | A value in degrees such as: 50,123 |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.3 | ColumnlocalCoordinatesLatResolution | read-write | current | A value in bits. Higher value is more accurate. |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.4 | ColumnlocalCoordinatesLongitude | read-write | current | A value in degrees such as: 50,123 |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.5 | ColumnlocalCoordinatesLongResolution | read-write | current | A value in bits. Higher value is more accurate. |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.6 | ColumnlocalCoordinatesAltitude | read-write | current | A value in meters. |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.7 | ColumnlocalCoordinatesAltResolution | read-write | current | A value in bits. Higher value is more accurate. |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.8 | ColumnlocalCoordinatesAltType | read-write | current | Defines in which way the altitude is interpreted. |
| 1.3.6.1.4.1.3181.10.6.2.43.2.1.9 | ColumnlocalCoordinatesDatum | read-write | current | Name of the map the given coordinates are based upon. |
| 1.3.6.1.4.1.3181.10.6.2.43.3 | TablelocalCivicLocationTable | not-accessible | current | Detailed address information about the physical location of this device may be entered here. These data are forwarded using the LLDP-MED protocol. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1 | RowlocalCivicLocationEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.1 | ColumnlocalCivicLocationIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.2 | ColumnlocalCivicLocationCountryCode | read-write | current | Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.3 | ColumnlocalCivicLocationLanguage | read-write | current | ISO 639 language code used for presenting the address information. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.4 | ColumnlocalCivicLocationNationalSubdivision | read-write | current | National subdivision: state, canton, region, province, or prefecture. Example: Hessen |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.5 | ColumnlocalCivicLocationCounty | read-write | current | County / parish / district. Example: Landkreis Darmstadt |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.6 | ColumnlocalCivicLocationTown | read-write | current | City / township. Example: Frankfurt |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.7 | ColumnlocalCivicLocationDistrict | read-write | current | City district / division / borough / ward. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.8 | ColumnlocalCivicLocationBlock | read-write | current | Neighborhood / block. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.9 | ColumnlocalCivicLocationStreet | read-write | current | Name of the street without house number. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.10 | ColumnlocalCivicLocationLeadingStreetDirection | read-write | current | Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.11 | ColumnlocalCivicLocationTrailingStreetSuffix | read-write | current | Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.12 | ColumnlocalCivicLocationStreetSuffix | read-write | current | Street suffix such as place or avenue. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.13 | ColumnlocalCivicLocationHouseNumber | read-write | current | House number without a possible suffix. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.14 | ColumnlocalCivicLocationHouseNumberSuffix | read-write | current | A modifier to the house number. It does not include parts of the house number. Example: a |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.15 | ColumnlocalCivicLocationLandmark | read-write | current | Landmark or vanity address for easier reference. Example: Airport Frankfurt |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.16 | ColumnlocalCivicLocationAdditionalInfo | read-write | current | Additional location information without specified format. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.17 | ColumnlocalCivicLocationName | read-write | current | Identifies the person or organization associated with the address. Example: Sunshine Airline Office |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.18 | ColumnlocalCivicLocationZipCode | read-write | current | Postal zip code for the address. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.19 | ColumnlocalCivicLocationBuilding | read-write | current | The name of the building if this exists. Example: Terminal Building East |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.20 | ColumnlocalCivicLocationUnit | read-write | current | Unit / appartment / suite. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.21 | ColumnlocalCivicLocationFloor | read-write | current | Floor value. Example: 1 for first floor |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.22 | ColumnlocalCivicLocationRoom | read-write | current | Room number or name. |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.23 | ColumnlocalCivicLocationPlaceType | read-write | current | Place type. Example: Office |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.24 | ColumnlocalCivicLocationScript | read-write | current | The script (from ISO 15924 [14]) used to encode the address information. Default: Latn |
| 1.3.6.1.4.1.3181.10.6.2.43.3.1.25 | ColumnlocalCivicLocationElinNumber | read-write | current | Emergency Call Services (ECS) Emergency Location Identification Number (ELIN). |
| 1.3.6.1.4.1.3181.10.6.2.43.100 | TablereceivedOverviewTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1 | RowreceivedOverviewEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.1 | ColumnreceivedOverviewPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.2 | ColumnreceivedOverviewSysName | read-only | current | System name. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.3 | ColumnreceivedOverviewSysDesc | read-only | current | System description. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.4 | ColumnreceivedOverviewChassisIdSubtype | read-only | current | Type of chassis id. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.5 | ColumnreceivedOverviewChassisId | read-only | current | Chassis id of received frame. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.6 | ColumnreceivedOverviewMgmtIp | read-only | current | Management IP address. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.7 | ColumnreceivedOverviewMgmtOid | read-only | current | Management start OID for SNMP access. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.8 | ColumnreceivedOverviewCapabilities | read-only | current | LLDP capabilities supported. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.9 | ColumnreceivedOverviewCapabilitiesEnabled | read-only | current | LLDP capabilities enabled. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.10 | ColumnreceivedOverviewMedCapabilities | read-only | current | LLDP_MED capabilities. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.11 | ColumnreceivedOverviewPortIdSubtype | read-only | current | Type of port id. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.12 | ColumnreceivedOverviewPortIdentification | read-only | current | Port id. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.13 | ColumnreceivedOverviewPortDescription | read-only | current | Port description. |
| 1.3.6.1.4.1.3181.10.6.2.43.100.1.14 | ColumnreceivedOverviewPortVlan | read-only | current | Port vlan identifier. Related to port_default_vlan_id. |
| 1.3.6.1.4.1.3181.10.6.2.43.101 | TablereceivedCoordinatesTable | not-accessible | current | Detailed GPS information about the pysical location of the attached device for each port are visible here if provided through the LLDP-MED protocol. |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1 | RowreceivedCoordinatesEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.1 | ColumnreceivedCoordinatesPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.2 | ColumnreceivedCoordinatesLatitude | read-only | current | A value in degrees such as: 50,123 |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.3 | ColumnreceivedCoordinatesLatResolution | read-only | current | A value in bits. Higher value is more accurate. |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.4 | ColumnreceivedCoordinatesLongitude | read-only | current | A value in degrees such as: 50,123 |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.5 | ColumnreceivedCoordinatesLongResolution | read-only | current | A value in bits. Higher value is more accurate. |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.6 | ColumnreceivedCoordinatesAltitude | read-only | current | A value in meters or the floor level depending on definition. |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.7 | ColumnreceivedCoordinatesAltResolution | read-only | current | A value in bits. Higher value is more accurate. |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.8 | ColumnreceivedCoordinatesAltUnit | read-only | current | Defines in which way the altitude is interpreted. |
| 1.3.6.1.4.1.3181.10.6.2.43.101.1.9 | ColumnreceivedCoordinatesDatum | read-only | current | Name of the map the given coordinates are based upon. |
| 1.3.6.1.4.1.3181.10.6.2.43.102 | TablereceivedCivicLocationsTable | not-accessible | current | Detailed address information about the physical location of the attached device for each port are visible here if provided through the LLDP-MED protocol. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1 | RowreceivedCivicLocationsEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.1 | ColumnreceivedCivicLocationsPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.2 | ColumnreceivedCivicLocationsCountryCode | read-only | current | Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.3 | ColumnreceivedCivicLocationsLanguage | read-only | current | ISO 639 language code used for presenting the address information. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.4 | ColumnreceivedCivicLocationsNationalSubdivision | read-only | current | National subdivision: state, canton, region, province, or prefecture. Example: Hessen. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.5 | ColumnreceivedCivicLocationsCounty | read-only | current | County / parish / district. Example: Landkreis Darmstadt |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.6 | ColumnreceivedCivicLocationsTown | read-only | current | City / township. Example: Frankfurt |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.7 | ColumnreceivedCivicLocationsDistrict | read-only | current | City district / division / borough / ward. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.8 | ColumnreceivedCivicLocationsBlock | read-only | current | Neighborhood / block. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.9 | ColumnreceivedCivicLocationsStreet | read-only | current | Name of the street without house number. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.10 | ColumnreceivedCivicLocationsLeadingStreetDirection | read-only | current | Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.11 | ColumnreceivedCivicLocationsTrailingStreetSuffix | read-only | current | Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.12 | ColumnreceivedCivicLocationsStreetSuffix | read-only | current | Street suffix such as place or avenue. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.13 | ColumnreceivedCivicLocationsHouseNumber | read-only | current | House number without a possible suffix. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.14 | ColumnreceivedCivicLocationsHouseNumberSuffix | read-only | current | A modifier to the house number. It does not include parts of the house number. Example: a |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.15 | ColumnreceivedCivicLocationsLandmark | read-only | current | Landmark or vanity address for easier reference. Example: Airport Frankfurt |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.16 | ColumnreceivedCivicLocationsAdditionalInfo | read-only | current | Additional location information without specified format. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.17 | ColumnreceivedCivicLocationsName | read-only | current | Identifies the person or organization associated with the address. Example: Sunshine Airline Office |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.18 | ColumnreceivedCivicLocationsZipCode | read-only | current | Postal zip code for the address. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.19 | ColumnreceivedCivicLocationsBuilding | read-only | current | The name of the building if this exists. Example: Terminal Building East |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.20 | ColumnreceivedCivicLocationsUnit | read-only | current | Unit / appartment / suite. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.21 | ColumnreceivedCivicLocationsFloor | read-only | current | Floor value. Example: 1 for first floor. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.22 | ColumnreceivedCivicLocationsRoom | read-only | current | Room number or name. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.23 | ColumnreceivedCivicLocationsPlaceType | read-only | current | Place type. Example: Office. |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.24 | ColumnreceivedCivicLocationsScript | read-only | current | The script (from ISO 15924 [14]) used to encode the address information. Default: Latn |
| 1.3.6.1.4.1.3181.10.6.2.43.102.1.25 | ColumnreceivedCivicLocationsElinNumber | read-only | current | Emergency Call Services (ECS) Emergency Location Identification Number (ELIN). |
| 1.3.6.1.4.1.3181.10.6.2.43.103 | TablereceivedPoliciesTable | not-accessible | current | Detailed information about the attached applications. |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1 | RowreceivedPoliciesEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1.1 | ColumnreceivedPoliciesPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1.2 | ColumnreceivedPoliciesApplicationType | read-only | current | Valid application types. |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1.3 | ColumnreceivedPoliciesPolicyDefined | read-only | current | False indicates policy is unknown. True indicates policy is defined. |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1.4 | ColumnreceivedPoliciesTaggedVlan | read-only | current | When set VLAN tagging is used. |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1.5 | ColumnreceivedPoliciesVlanId | read-only | current | 0 - only the priority level is significant. / IEEE 802.1q VLAN ID (VID) value. Related to voice vlan. |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1.6 | ColumnreceivedPoliciesLayer2Priority | read-only | current | IEEE 802.1d / IEEE 802.1p Layer 2 Priority. |
| 1.3.6.1.4.1.3181.10.6.2.43.103.1.7 | ColumnreceivedPoliciesDscp | read-only | current | DiffServ/Differentiated Services Code Point (DSCP) value as defined in IETF RFC 2474 for the specified application type. |
| 1.3.6.1.4.1.3181.10.6.2.43.104 | TablereceivedInventoryInfosTable | not-accessible | current | This table lists general inventory data of the attached equipment. |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1 | RowreceivedInventoryInfosEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.1 | ColumnreceivedInventoryInfosPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.2 | ColumnreceivedInventoryInfosHardwareRevision | read-only | current | Hardware version |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.3 | ColumnreceivedInventoryInfosFirmwareRevision | read-only | current | Firmware version |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.4 | ColumnreceivedInventoryInfosSoftwareRevision | read-only | current | Software version |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.5 | ColumnreceivedInventoryInfosSerialNumber | read-only | current | Serial number |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.6 | ColumnreceivedInventoryInfosManufacturer | read-only | current | Manufacturer name |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.7 | ColumnreceivedInventoryInfosModelName | read-only | current | Vendor-specific model name |
| 1.3.6.1.4.1.3181.10.6.2.43.104.1.8 | ColumnreceivedInventoryInfosAssetId | read-only | current | Vendor-specific asset tracking identifier |
| 1.3.6.1.4.1.3181.10.6.2.43.105 | TablereceivedPoeInfosTable | not-accessible | current | Detailed PoE information about the attached applications. |
| 1.3.6.1.4.1.3181.10.6.2.43.105.1 | RowreceivedPoeInfosEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.105.1.1 | ColumnreceivedPoeInfosPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.105.1.2 | ColumnreceivedPoeInfosType | read-only | current | Type of PoE equipment. |
| 1.3.6.1.4.1.3181.10.6.2.43.105.1.3 | ColumnreceivedPoeInfosSource | read-only | current | Describes the power source. |
| 1.3.6.1.4.1.3181.10.6.2.43.105.1.4 | ColumnreceivedPoeInfosPriority | read-only | current | Indicates priority of this device. |
| 1.3.6.1.4.1.3181.10.6.2.43.105.1.5 | ColumnreceivedPoeInfosValue | read-only | current | Indicates the power available from the PSE via this port expressed in units of 0.1 watts on the remote device. |
| 1.3.6.1.4.1.3181.10.6.2.43.106 | TablereceivedPoeControlTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1 | RowreceivedPoeControlEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.1 | ColumnreceivedPoeControlPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.2 | ColumnreceivedPoeControlType | read-only | current | Indicates device type. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.3 | ColumnreceivedPoeControlPoePowerSupported | read-only | current | Indicates if PoE is supported by the interface. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.4 | ColumnreceivedPoeControlPoePowerEnabled | read-only | current | Indicates if PoE is enabled for this interface. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.5 | ColumnreceivedPoeControlPairControl | read-only | current | Indicates if the pair selection can be controlled on the given port |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.6 | ColumnreceivedPoeControlPowerPairs | read-only | current | Indicates which pins of the plug are used for power. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.7 | ColumnreceivedPoeControlPowerClass | read-only | current | Required PoE class. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.8 | ColumnreceivedPoeControlDeviceType | read-only | current | Type of PoE equipment. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.9 | ColumnreceivedPoeControlSource | read-only | current | Indicates the power source. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.10 | ColumnreceivedPoeControlPriority | read-only | current | Priority of the attached port. |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.11 | ColumnreceivedPoeControlPdRequestedPower | read-only | current | PD requested power value |
| 1.3.6.1.4.1.3181.10.6.2.43.106.1.12 | ColumnreceivedPoeControlPseAllocatedPower | read-only | current | PSE allocated power value |