G6-MSP1000-MIB
263 objects
Microsens private MIB for Generation 6 Ethernet Switches
Imported Objects
| MICROSENS-G6-MIB | g6 |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3181.10.6.1 | Identitydevice | Microsens private MIB for Generation 6 Ethernet Switches | ||
| 1.3.6.1.4.1.3181.10.6.1.94 | Nodemsp1000 | |||
| 1.3.6.1.4.1.3181.10.6.1.94.1 | TablesystemConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.1.1 | RowsystemConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.1.1.1 | ColumnsystemConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.1.1.2 | ColumnsystemConfigNmsOperationMode | read-write | current | Read and learn in PASSIVE mode or ACTIVE mode forcing configuration upon the other modules. |
| 1.3.6.1.4.1.3181.10.6.1.94.1.1.3 | ColumnsystemConfigCoreMode | read-write | current | Use V2 unless used with an older system running in V1 mode. Only change when instructed. |
| 1.3.6.1.4.1.3181.10.6.1.94.1.1.4 | ColumnsystemConfigNodeId | read-write | current | Node Id used when NMS is used in combination with SEEmiles V5 management software. When in doubt use default node id 60000. |
| 1.3.6.1.4.1.3181.10.6.1.94.1.1.5 | ColumnsystemConfigDisableLegacyAccess | read-write | current | When set network access via SEEmiles is no longer possible. |
| 1.3.6.1.4.1.3181.10.6.1.94.2 | TableslotConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1 | RowslotConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1.1 | ColumnslotConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1.2 | ColumnslotConfigModule | read-write | current | Defines which module is expected to be placed in this slot. This should be identical to the actual hardware. The value may be set prior to actual roll-out to p… |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1.3 | ColumnslotConfigSparepartMode | read-write | current | When enabled the module is operating normally but will not generate any alarms. This is useful for modules that are inserted but only used as spare and are not… |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1.4 | ColumnslotConfigPort1Alias | read-write | current | User defined port name for easier reference. |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1.5 | ColumnslotConfigPort2Alias | read-write | current | User defined port name for easier reference. |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1.6 | ColumnslotConfigPort3Alias | read-write | current | User defined port name for easier reference. |
| 1.3.6.1.4.1.3181.10.6.1.94.2.1.7 | ColumnslotConfigPort4Alias | read-write | current | User defined port name for easier reference. |
| 1.3.6.1.4.1.3181.10.6.1.94.3 | Tablex2gConfigTable | not-accessible | current | This table is used to define any X2G or OFX-3 modules in the system. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1 | Rowx2gConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.1 | Columnx2gConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.2 | Columnx2gConfigPort1Datarate | read-write | current | This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to th… |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.3 | Columnx2gConfigPort2Datarate | read-write | current | This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to th… |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.4 | Columnx2gConfigPort3Datarate | read-write | current | This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to th… |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.5 | Columnx2gConfigPort4Datarate | read-write | current | This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to th… |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.6 | Columnx2gConfigCrossConnect | read-write | current | This parameter defines the data path through the module. It is also used to setup a permanent bit error rate test. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.7 | Columnx2gConfigDeactivatePort1 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.8 | Columnx2gConfigDeactivatePort2 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.9 | Columnx2gConfigDeactivatePort3 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.10 | Columnx2gConfigDeactivatePort4 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.11 | Columnx2gConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.12 | Columnx2gConfigLossOfSignalHandling | read-write | current | When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the currently a… |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.13 | Columnx2gConfigOptimizedFor8b10b | read-write | current | Enable this feature when Ethernet or FibreChannel is used. Do not set when SDH is used on any port. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.14 | Columnx2gConfigBertPattern | read-write | current | Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.15 | Columnx2gConfigSfpDeltaInterval | read-write | current | This enables and defines the interval in which the optical receive power level of each SFP is read and compared to previous value. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.16 | Columnx2gConfigSfpDeltaThreshold | read-write | current | This defines how much the optical receive power level can differ between successive reads before a warning trap is generated. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.17 | Columnx2gConfigBackupTrigger | read-write | current | Defines under which optical signal condition an automated backup is initiated. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.18 | Columnx2gConfigStayWithLastLink | read-write | current | When set the backup switch remains in last position even when signal returns. Still the backup warning turns off after the delay set under backup_end parameter… |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.19 | Columnx2gConfigBackupEnd | read-write | current | Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated. |
| 1.3.6.1.4.1.3181.10.6.1.94.3.1.20 | Columnx2gConfigPermitLinkOverride | read-write | current | Permits the manual selection of a failed link using the link selection. Defaults to false to safeguard against accidential link selection which would result in… |
| 1.3.6.1.4.1.3181.10.6.1.94.4 | TabletxgConfigTable | not-accessible | current | This table is used to define any TXG or XCM-2 modules in the system. |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1 | RowtxgConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.1 | ColumntxgConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.2 | ColumntxgConfigTxgDatarate | read-write | current | This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to th… |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.3 | ColumntxgConfigTxgOperationMode | read-write | current | This parameter defines the data path through the module when an internal cross connect is avalable. It is also used to setup a permanent bit error rate test. (… |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.4 | ColumntxgConfigPort1ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.5 | ColumntxgConfigPort2ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.6 | ColumntxgConfigDeactivatePort1 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.7 | ColumntxgConfigDeactivatePort2 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.8 | ColumntxgConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.9 | ColumntxgConfigLossOfSignalHandling | read-write | current | When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port. |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.10 | ColumntxgConfigBertPattern | read-write | current | Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT. |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.11 | ColumntxgConfigSfpDeltaInterval | read-write | current | This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value. |
| 1.3.6.1.4.1.3181.10.6.1.94.4.1.12 | ColumntxgConfigSfpDeltaThreshold | read-write | current | This defines how much the optical receive power level can differ between successive reads before a warning trap is generated. |
| 1.3.6.1.4.1.3181.10.6.1.94.5 | TablecxgPlusConfigTable | not-accessible | current | This table is used to define any CXG+ or OFC-10 modules in the system. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1 | RowcxgPlusConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.1 | ColumncxgPlusConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.2 | ColumncxgPlusConfigCxgPort12Datarate | read-write | current | The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is pro… |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.3 | ColumncxgPlusConfigCxgPort34Datarate | read-write | current | The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is pro… |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.4 | ColumncxgPlusConfigPort1ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.5 | ColumncxgPlusConfigPort2ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.6 | ColumncxgPlusConfigPort3ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.7 | ColumncxgPlusConfigPort4ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.8 | ColumncxgPlusConfigDeactivatePort1 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.9 | ColumncxgPlusConfigDeactivatePort2 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.10 | ColumncxgPlusConfigDeactivatePort3 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.11 | ColumncxgPlusConfigDeactivatePort4 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.12 | ColumncxgPlusConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.13 | ColumncxgPlusConfigLossOfSignalHandling | read-write | current | When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.14 | ColumncxgPlusConfigSfpDeltaInterval | read-write | current | This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value. |
| 1.3.6.1.4.1.3181.10.6.1.94.5.1.15 | ColumncxgPlusConfigSfpDeltaThreshold | read-write | current | This defines how much the optical receive power level can differ between successive reads before a warning trap is generated. |
| 1.3.6.1.4.1.3181.10.6.1.94.6 | TablecxgConfigTable | not-accessible | current | This table is used to define any CXG or XCM-3 modules in the system. |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1 | RowcxgConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.1 | ColumncxgConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.2 | ColumncxgConfigCxgPort12Datarate | read-write | current | The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is pro… |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.3 | ColumncxgConfigPort1ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.4 | ColumncxgConfigPort2ItuChannel | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.5 | ColumncxgConfigDeactivatePort1 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.6 | ColumncxgConfigDeactivatePort2 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.7 | ColumncxgConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.8 | ColumncxgConfigLossOfSignalHandling | read-write | current | When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port. |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.9 | ColumncxgConfigSfpDeltaInterval | read-write | current | This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value. |
| 1.3.6.1.4.1.3181.10.6.1.94.6.1.10 | ColumncxgConfigSfpDeltaThreshold | read-write | current | This defines how much the optical receive power level can differ between successive reads before a warning trap is generated. |
| 1.3.6.1.4.1.3181.10.6.1.94.7 | Tablet4gConfigTable | not-accessible | current | This table is used to define any T4G or OFC-4 modules in the system. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1 | Rowt4gConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.1 | Columnt4gConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.2 | Columnt4gConfigT4gPort12Datarate | read-write | current | The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is pro… |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.3 | Columnt4gConfigT4gPort34Datarate | read-write | current | Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be … |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.4 | Columnt4gConfigT4gOperationMode | read-write | current | This parameter defines the data path through the module when an internal cross connect is avalable. It is also used to setup a permanent bit error rate test. (… |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.5 | Columnt4gConfigDeactivatePort1 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.6 | Columnt4gConfigDeactivatePort2 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.7 | Columnt4gConfigDeactivatePort3 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.8 | Columnt4gConfigDeactivatePort4 | read-write | current | When enabled, the optical interface is disabled and communication is cut. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.9 | Columnt4gConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.10 | Columnt4gConfigLossOfSignalHandling | read-write | current | When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.11 | Columnt4gConfigBertPattern | read-write | current | Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.12 | Columnt4gConfigSfpDeltaInterval | read-write | current | This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value. |
| 1.3.6.1.4.1.3181.10.6.1.94.7.1.13 | Columnt4gConfigSfpDeltaThreshold | read-write | current | This defines how much the optical receive power level can differ between successive reads before a warning trap is generated. |
| 1.3.6.1.4.1.3181.10.6.1.94.8 | Tablem2gConfigTable | not-accessible | current | This table is used to define any M2G or TDM-2 modules in the system. |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1 | Rowm2gConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.1 | Columnm2gConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.2 | Columnm2gConfigChannel1Datarate | read-write | current | Devices the datarate of the first TDM channel (port 1) |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.3 | Columnm2gConfigChannel2Datarate | read-write | current | Devices the datarate of the second TDM channel (port 2) |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.4 | Columnm2gConfigPort1CopperSfp | read-write | current | Set when local copper RJ45 SFP is used and connection cannot be established. |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.5 | Columnm2gConfigPort2CopperSfp | read-write | current | Set when local copper RJ45 SFP is used and connection cannot be established. |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.6 | Columnm2gConfigSfpDeltaInterval | read-write | current | This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value. |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.7 | Columnm2gConfigSfpDeltaThreshold | read-write | current | This defines how much the optical receive power level can differ between successive reads before a warning trap is generated. |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.8 | Columnm2gConfigLinkBackupTrigger | read-write | current | Defines under which optical signal condition an automated backup is initiated. |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.9 | Columnm2gConfigStayWithLastLink | read-write | current | When set the backup switch remains in last position even when signal returns. Still the backup warning turns off after the delay set under backup_end parameter… |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.10 | Columnm2gConfigBackupEnd | read-write | current | Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated. |
| 1.3.6.1.4.1.3181.10.6.1.94.8.1.11 | Columnm2gConfigPermitLinkOverride | read-write | current | Permits the manual selection of a failed link using the link selection. Defaults to false to safeguard against accidential link selection which would result in… |
| 1.3.6.1.4.1.3181.10.6.1.94.9 | Tableom1ConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1 | Rowom1ConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.1 | Columnom1ConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.2 | Columnom1ConfigWavelengthPortA | read-write | current | Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured. |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.3 | Columnom1ConfigLowThresholdPortA | read-write | current | Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event. |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.4 | Columnom1ConfigHighThresholdPortA | read-write | current | Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event. |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.5 | Columnom1ConfigWavelengthPortB | read-write | current | Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured. |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.6 | Columnom1ConfigLowThresholdPortB | read-write | current | Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event. |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.7 | Columnom1ConfigHighThresholdPortB | read-write | current | Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event. |
| 1.3.6.1.4.1.3181.10.6.1.94.9.1.8 | Columnom1ConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.10 | Tablelp1ConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1 | Rowlp1ConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.1 | Columnlp1ConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.2 | Columnlp1ConfigWavelengthPortA | read-write | current | Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.3 | Columnlp1ConfigLowThresholdPortA | read-write | current | Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event and a backup when configured. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.4 | Columnlp1ConfigHighThresholdPortA | read-write | current | Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event and a backup when configured. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.5 | Columnlp1ConfigWavelengthPortB | read-write | current | Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.6 | Columnlp1ConfigLowThresholdPortB | read-write | current | Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event and a backup when configured. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.7 | Columnlp1ConfigHighThresholdPortB | read-write | current | Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event and a backup when configured. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.8 | Columnlp1ConfigBackupCriteria | read-write | current | Defines under which optical signal condition an automated backup is initiated. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.9 | Columnlp1ConfigStayWithLastLink | read-write | current | When set the backup switch remains in last position even when signal return. Still the backup warning turns off after the delay set under backup_end parameter … |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.10 | Columnlp1ConfigBackupEnd | read-write | current | Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated. |
| 1.3.6.1.4.1.3181.10.6.1.94.10.1.11 | Columnlp1ConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.11 | TableemConfigTable | not-accessible | current | Configuration for EDFA amplifier modules EM2 and EM3. |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1 | RowemConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.1 | ColumnemConfigIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.2 | ColumnemConfigEdfaOperationMode | read-write | current | Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured. |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.3 | ColumnemConfigLossOfSignalHandling | read-write | current | Defines if loss of input signal turns off the EDFA pump (PERCOLATE) or not (LOCAL) |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.4 | ColumnemConfigSignalGain | read-write | current | Desired signal gain in dB. |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.5 | ColumnemConfigMaxOutputPower | read-write | current | Maximum output power permitted to exit the module. |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.6 | ColumnemConfigLowThresholdEdfaIn | read-write | current | This corresponds to the unamplified input signal before entering the EDFA section. Defines the lower optical signal level in dBm. A signal level below this thr… |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.7 | ColumnemConfigHighThresholdEdfaIn | read-write | current | This corresponds to the unamplified input signal before entering the EDFA section. Defines the upper optical signal level in dBm. A signal level above this thr… |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.8 | ColumnemConfigLowThresholdPortB | read-write | current | Port B is the unamplified return path through the module. Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an ev… |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.9 | ColumnemConfigHighThresholdPortB | read-write | current | Port B is the unamplified return path through the module. Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an ev… |
| 1.3.6.1.4.1.3181.10.6.1.94.11.1.10 | ColumnemConfigFrontPanelMode | read-write | current | Determines what is displayed on the front panel, when available. Also controls the modules local buttons. |
| 1.3.6.1.4.1.3181.10.6.1.94.12 | TablemoduleControlTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1 | RowmoduleControlEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.1 | ColumnmoduleControlIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.2 | ColumnmoduleControlEnterPassword | read-write | current | This command will set the module password. Only required when the nms_operation_mode is set to passive mode. Enter the password before configuration or actions… |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.3 | ColumnmoduleControlRebootModule | read-write | current | This command will restart the module. All communication will be disrupted! Syntax: reboot_module = CONFIRM. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.4 | ColumnmoduleControlWarmStart | read-write | current | This command will warm start the module. Communication shall not be disrupted. (Firmware dependend) Syntax: warm_start = CONFIRM. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.5 | ColumnmoduleControlClearCounter | read-write | current | This command will clear all module and port related statistics counter. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.6 | ColumnmoduleControlSwitchOffBackup | read-write | current | For a module that supports backup and which currently is in backup condition this command will revert to normal operation. If this would disrupt traffic a warn… |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.7 | ColumnmoduleControlSwitchToBackup | read-write | current | For a module that supports backup this command will switch to the backup link. If this would disrupt traffic because backup link is not available a warning is … |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.8 | ColumnmoduleControlAutomaticBackup | read-write | current | This command returns a manually overridden backup module to normal automatic mode. No parameter are required. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.9 | ColumnmoduleControlWriteDisplay | read-write | current | Writes to the front panel display of the module. Only for modules that offer a front panel display. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.10 | ColumnmoduleControlLedTest | read-write | current | This will start the modules LED test and will return the LED back up automatic mode after a few seconds. May be also be used to identify a certain module. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.11 | ColumnmoduleControlLoopOff | read-write | current | Turns all loops off |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.12 | ColumnmoduleControlLoopPort1 | read-write | current | Tries to engage a loop at port 1. Note not all modules support loops. View port status to check success. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.13 | ColumnmoduleControlLoopPort2 | read-write | current | Tries to engage a loop at port 2. Note not all modules support loops. View port status to check success. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.14 | ColumnmoduleControlLoopPort3 | read-write | current | Tries to engage a loop at port 3. Note not all modules support loops. View port status to check success. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.15 | ColumnmoduleControlLoopPort4 | read-write | current | Tries to engage a loop at port 4. Note not all modules support loops. View port status to check success. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.16 | ColumnmoduleControlBertRestart | read-write | current | Resynchronizes BERT. Only has an effect if a BERT is available on the module and configured to be active. |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.17 | ColumnmoduleControlBertInsertError | read-write | current | Inserts an error in the data pattern. This can be used to confirm that a BERT is actually operating. Only has an effect if a BERT is available on the module an… |
| 1.3.6.1.4.1.3181.10.6.1.94.12.1.18 | ColumnmoduleControlBertClearCounter | read-write | current | Clears the BERT counter. Only has an effect if a BERT is available on the module and configured to be active. |
| 1.3.6.1.4.1.3181.10.6.1.94.100 | TablesystemStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1 | RowsystemStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1.1 | ColumnsystemStatusIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1.2 | ColumnsystemStatusAnyErrorCondition | read-only | current | True when any error condition is currently present in any module. |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1.3 | ColumnsystemStatusAnyTestMode | read-only | current | True when any module is in loopback test or has a backup engaged. |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1.4 | ColumnsystemStatusAnySparePart | read-only | current | True when any module is marked as spare part. |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1.5 | ColumnsystemStatusUsedNodeId | read-only | current | Actually used node id as discovered from device |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1.6 | ColumnsystemStatusLocalRack | read-only | current | Indicates in which rack the mangement module over which this information is retrieved is inserted. |
| 1.3.6.1.4.1.3181.10.6.1.94.100.1.7 | ColumnsystemStatusLocalSlot | read-only | current | Indicates in which slot the mangement module over which this information is retrieved is inserted. |
| 1.3.6.1.4.1.3181.10.6.1.94.101 | TablemoduleInventoryTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1 | RowmoduleInventoryEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.1 | ColumnmoduleInventoryIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.2 | ColumnmoduleInventoryExpectedModule | read-only | current | Name of module configured for this slot. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.3 | ColumnmoduleInventoryModule | read-only | current | Name of module actually discovered in this slot. This name should be equal to the above name otherwise configuration may not apply properly. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.4 | ColumnmoduleInventoryType | read-only | current | General functional type of module inserted. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.5 | ColumnmoduleInventoryBoardCode | read-only | current | Internal code of actually inserted module. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.6 | ColumnmoduleInventoryAdditionalInfo | read-only | current | Additional information that may be saved in some modules during production. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.7 | ColumnmoduleInventorySerialNumber | read-only | current | Serial number as stored within the hardware. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.8 | ColumnmoduleInventoryOccupiedSlots | read-only | current | Number of slots taken by this module. Usually 1. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.9 | ColumnmoduleInventoryProjectNumber | read-only | current | Internal hardware project number |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.10 | ColumnmoduleInventoryBuildVersion | read-only | current | Precise build code for hardware version tracking. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.11 | ColumnmoduleInventoryProductionDate | read-only | current | Production data of the module |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.12 | ColumnmoduleInventoryMfgTestInfo | read-only | current | Internal information for quality management. Manufacturing Site / Test Site / Test Person |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.13 | ColumnmoduleInventoryNumberOfOpticalPorts | read-only | current | Indicates the number of actively monitored optical ports of this type of module. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.14 | ColumnmoduleInventoryNumberOfSfpPorts | read-only | current | Indicates the number of optical SFP or SFP+ ports of this type of module. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.15 | ColumnmoduleInventoryNumberOfXfpPorts | read-only | current | Indicates the number of optical XFP ports of this type of module. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.16 | ColumnmoduleInventoryCoreFirmwareVersion | read-only | current | Core operating system software version. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.17 | ColumnmoduleInventoryCoreFirmwareDate | read-only | current | Core operating system software creation date. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.18 | ColumnmoduleInventoryApplFirmwareVersion | read-only | current | Application software version. |
| 1.3.6.1.4.1.3181.10.6.1.94.101.1.19 | ColumnmoduleInventoryApplFirmwareDate | read-only | current | Application software creation date. |
| 1.3.6.1.4.1.3181.10.6.1.94.102 | TablemoduleStatusTable | not-accessible | current | This table holds a record for each module in the system. Note that not all modules deliver every kind of status. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1 | RowmoduleStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.1 | ColumnmoduleStatusIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.2 | ColumnmoduleStatusModule | read-only | current | Name of module actually discovered in this slot. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.3 | ColumnmoduleStatusSystemOk | read-only | current | True when the module has booted and appears ok. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.4 | ColumnmoduleStatusErrorCondition | read-only | current | True when any error condition is currently present. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.5 | ColumnmoduleStatusTestMode | read-only | current | True when module is in loopback test or a backup is engaged. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.6 | ColumnmoduleStatusSparePart | read-only | current | True when module is marked as spare part. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.7 | ColumnmoduleStatusUptime | read-only | current | Uptime since last reboot in seconds. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.8 | ColumnmoduleStatusTimeSinceCounterReset | read-only | current | How long ago have the statistics counter been restarted. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.9 | ColumnmoduleStatusTemperature | read-only | current | Temperature value in centigrade. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.10 | ColumnmoduleStatusTooHot | read-only | current | True when module is running too hot. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.11 | ColumnmoduleStatusBackupState | read-only | current | Indicates if a backup is active and in which state. |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.12 | ColumnmoduleStatusBackupCounter | read-only | current | Counts the number of times this module has initiated a backup (if backup feature is available for this module type). |
| 1.3.6.1.4.1.3181.10.6.1.94.102.1.13 | ColumnmoduleStatusBackupDuration | read-only | current | How long the backup has been activated in total since last value reset. |
| 1.3.6.1.4.1.3181.10.6.1.94.103 | TableportStatusTable | not-accessible | current | This table holds a record for each optical port of the system. Note that not all modules deliver every kind of statistic. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1 | RowportStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.1 | ColumnportStatusPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.2 | ColumnportStatusModule | read-only | current | Name of module in which this port is present. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.3 | ColumnportStatusLocation | read-only | current | Textual description of port location. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.4 | ColumnportStatusSnmpPort | read-only | current | Slot and port representation as used in SNMP. Formula is Slot*10000 + Port*10. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.5 | ColumnportStatusAlias | read-only | current | Configured alias nickname of this port. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.6 | ColumnportStatusAdminStatus | read-only | current | Reflects the administrative setting of this port. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.7 | ColumnportStatusOperStatus | read-only | current | Indicates the combined operation port status. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.8 | ColumnportStatusDetailedStatus | read-only | current | Indicates detailed issues related to the port. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.9 | ColumnportStatusPortDatarate | read-only | current | Reflects the data rate setting of this port. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.10 | ColumnportStatusUpdateTimeStamp | read-only | current | Indicates the time when this record was last updated. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.11 | ColumnportStatusTimeSinceValueReset | read-only | current | Time since when the following statistics have been accumulated. They restart upon module power up or on forced value reset. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.12 | ColumnportStatusTimeSinceLastError | read-only | current | Time since last input signal loss or input signal too high. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.13 | ColumnportStatusTimeSignalTooLow | read-only | current | Total time the input signal was below threshold. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.14 | ColumnportStatusSignalTooLowCounter | read-only | current | Number of times a transition to signal too low has occured. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.15 | ColumnportStatusTimeSignalTooHigh | read-only | current | Total time the input signal was above high threshold. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.16 | ColumnportStatusSignalTooHighCounter | read-only | current | Number of times a transition to signal too high has occured. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.17 | ColumnportStatusLowThreshold | read-only | current | Defined signal too low threshold. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.18 | ColumnportStatusCurrentInputSignal | read-only | current | Actual current signal level. |
| 1.3.6.1.4.1.3181.10.6.1.94.103.1.19 | ColumnportStatusHighThreshold | read-only | current | Defined signal too high threshold. |
| 1.3.6.1.4.1.3181.10.6.1.94.104 | TableemStatusTable | not-accessible | current | Optical amplifier status |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1 | RowemStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.1 | ColumnemStatusIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.2 | ColumnemStatusSystemOk | read-only | current | True when no errors are present |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.3 | ColumnemStatusErrors | read-only | current | Indicates various optical error conditions. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.4 | ColumnemStatusHardwareCode | read-only | current | Details codes about the installed hardware components. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.5 | ColumnemStatusTimeSincePowerError | read-only | current | How long ago since the last time the output power was in error condition. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.6 | ColumnemStatusTimeWithPowerLoss | read-only | current | Accumulated time the output power has been down. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.7 | ColumnemStatusInputSignalLowCounter | read-only | current | Number of times a loss of signal has occured. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.8 | ColumnemStatusInputPower | read-only | current | Optical input power of port A. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.9 | ColumnemStatusSignalGain | read-only | current | Indicates how strong the input signal is amplified. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.10 | ColumnemStatusOptimalFlatGain | read-only | current | Indicates the best gain setting for an even amplification accross the wavelength channels |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.11 | ColumnemStatusBackReflection | read-only | current | The value should be low and indicates cable issues if not. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.12 | ColumnemStatusSignalOutputPower | read-only | current | Indicated the actually achieved optical signal output power. |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.13 | ColumnemStatusTotalOutputPower | read-only | current | Indicated the actually achieved optical output power leaving the module (including noise). |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.14 | ColumnemStatusMinOutputPower | read-only | current | Indicates the minimum optical output level that must be send out |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.15 | ColumnemStatusMaxOutputPower | read-only | current | Indicates the maximum optical output level that can be send out |
| 1.3.6.1.4.1.3181.10.6.1.94.104.1.16 | ColumnemStatusCfgOutputPower | read-only | current | Indicated the desired configured optical output power |
| 1.3.6.1.4.1.3181.10.6.1.94.105 | TablebertStatusTable | not-accessible | current | Displays the results of the bit error rate tester (BERT) if it is present and enabled in a slot |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1 | RowbertStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.1 | ColumnbertStatusIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.2 | ColumnbertStatusLocation | read-only | current | Textual description of BERT port location. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.3 | ColumnbertStatusBertOperation | read-only | current | Indicates the general bit error rate tester operational status. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.4 | ColumnbertStatusTotalErrors | read-only | current | Number of errored bits. Only valid when BERT is synchronized. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.5 | ColumnbertStatusTimeSinceLastError | read-only | current | Seconds elapsed since the last error was detected. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.6 | ColumnbertStatusTotalTestTime | read-only | current | Accumulated time how long the test was run since last value clear. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.7 | ColumnbertStatusErroredTime | read-only | current | Accumulated seconds in which at least on errored bit was detected. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.8 | ColumnbertStatusBitErrorRate | read-only | current | Averaged bit error rate during test interval. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.9 | ColumnbertStatusBerSinceLastError | read-only | current | Bit error rate since last error. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.10 | ColumnbertStatusTheoreticalBer | read-only | current | Theoretical best possible error rate in the given time frame of the current test interval. |
| 1.3.6.1.4.1.3181.10.6.1.94.105.1.11 | ColumnbertStatusAvailability | read-only | current | Relation of transmitted vs. Errored bits. |