G6-PORT-MIB
46 objects
Microsens private MIB for Generation 6 Ethernet Switches
Imported Objects
| MICROSENS-G6-MIB | g6 |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3181.10.6.1 | Identitydevice | Microsens private MIB for Generation 6 Ethernet Switches | ||
| 1.3.6.1.4.1.3181.10.6.1.81 | Nodeport | |||
| 1.3.6.1.4.1.3181.10.6.1.81.1 | TableconfigTable | not-accessible | current | This section defines the basic configuration parameter for each port. |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1 | RowconfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.1 | ColumnconfigPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.2 | ColumnconfigAlias | read-write | current | Alternative descriptive port name, user defineable. |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.3 | ColumnconfigPortOperation | read-write | current | Enables the port for operation. When disabled, port is shut down. |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.4 | ColumnconfigRole | read-write | current | Defines is a port is a regular local user port or a link to the network. This setting is references in various sanity checks throughout the system. When in dou… |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.5 | ColumnconfigSpeed | read-write | current | When Auto-Negotiation is disabled sets the ports data rate to the selected speed. When Auto-Negotiation is enabled it determines the highest data rate advertis… |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.6 | ColumnconfigMtu | read-write | current | MTU used only to have a place holder for SNMP ifTable |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.7 | ColumnconfigLoopProtection | read-write | current | Loop protection detects ethernet loops that can occur when cables are plugged in a way that the data send out of a port come back to the switch on another port… |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.8 | ColumnconfigAutoNegotiation | read-write | current | Enables Auto-Negotiation mode. When Auto-Negotiation mode is enabled, the parameters speed, full_duplex and flow_control determine the advertised port abilites… |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.9 | ColumnconfigFullDuplex | read-write | current | When Auto-Negotiation is disabled sets port to full duplex operation (when disabled, port is in half duplex mode). When Auto-Negotiation is enabled, it determi… |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.10 | ColumnconfigFlowcontrol | read-write | current | When Auto-Negotiation is disabled sets port into flow control mode. When Auto-Negotiation is enabled, it determines the advertisement of flow control capabilit… |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.11 | ColumnconfigMdiMode | read-write | current | Enables Auto MDI/MDI-X mode to automatically adapt port pinout to cable type used. When set to forced, port pinout is fixed. |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.12 | ColumnconfigEnergyEfficiency | read-write | current | Enable Energy Efficient Ethernet mode is only available for copper ports in 1000Base-T mode. |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.13 | ColumnconfigDualMediaMode | read-write | current | Define media selection for dual media ports. This function is only available on ports with dual media Phy. |
| 1.3.6.1.4.1.3181.10.6.1.81.1.1.14 | ColumnconfigAllowedOutgoingPorts | read-write | current | This bitmask may be used to limit the outgoing traffic to certain ports. This feature is also known as port based vlan. Syntax: slot/port, slot/port or use hex… |
| 1.3.6.1.4.1.3181.10.6.1.81.2 | TablemonitorTable | not-accessible | current | Port monitoring is a test tool which permits reading data from on port on another port for trouble shooting purposes. |
| 1.3.6.1.4.1.3181.10.6.1.81.2.1 | RowmonitorEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.81.2.1.1 | ColumnmonitorIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.81.2.1.2 | ColumnmonitorMode | read-write | current | Defines in which mode of port monitoring operation is used. Default is DISABLED for normal operation. |
| 1.3.6.1.4.1.3181.10.6.1.81.2.1.3 | ColumnmonitorSource | read-write | current | Source port(2) of which the traffic is to be monitored. CLI Syntax: 1/1 for first port. 1/1,1/3 for first and third port |
| 1.3.6.1.4.1.3181.10.6.1.81.2.1.4 | ColumnmonitorDestination | read-write | current | Port on which the traffic monitored on the source port shall be copied to. Normally a network sniffer is connected to this port. Please observe that possibly t… |
| 1.3.6.1.4.1.3181.10.6.1.81.3 | ScalarportRestartPort | read-write | current | This function may be used to briefly disabled and enable the port. This may be used to restart port authentication for example. Please supply port number as pa… |
| 1.3.6.1.4.1.3181.10.6.1.81.100 | ScalarportUplinkPorts | read-only | current | Indicates which port(s) are connected to the network. The setting is derived from default setting and may be overridden by port.role setting. |
| 1.3.6.1.4.1.3181.10.6.1.81.101 | ScalarportDownlinkPorts | read-only | current | Indicates to which port(s) a downstream switch is connected. The setting is derived from default setting and may be overridden by port.role setting. |
| 1.3.6.1.4.1.3181.10.6.1.81.102 | TablestatusTable | not-accessible | current | This status table indicates current port status and (negotiated) settings. It also displays if a port is logically blocked due to a certain protocol condition. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1 | RowstatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.1 | ColumnstatusPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.2 | ColumnstatusLinkUp | read-only | current | False: Link is down, True: Link is up. For dual media ports this indicates the status of the active media. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.3 | ColumnstatusLastLinkChange | read-only | current | Time when the link_up status changed the last time. Value may appear illogical if the system time is not properly set. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.4 | ColumnstatusLinkState | read-only | current | Logical port status. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.5 | ColumnstatusRxActivity | read-only | current | Indicates true when data activity on the receiver is detected. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.6 | ColumnstatusTxActivity | read-only | current | Indicates true when data activity on the transmitter is detected. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.7 | ColumnstatusMediaUsed | read-only | current | indicates which media is used for dual media ports |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.8 | ColumnstatusSpeedUsed | read-only | current | Actual (negotiated) port data rate. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.9 | ColumnstatusLoopedPort | read-only | current | Usually empty. When a port loop is detected through loop protection function then the looped port is indicated here. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.10 | ColumnstatusFullDuplexUsed | read-only | current | False: Half duplex, True: Full duplex. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.11 | ColumnstatusFlowcontrolUsed | read-only | current | False: No flow control, True: Use flow control. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.12 | ColumnstatusMdiUsed | read-only | current | False: MDI pinout, True: MDI-X pinout. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.13 | ColumnstatusEeeActive | read-only | current | When true Energy Efficent Ethernet is supported by both ends of the link and is active. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.14 | ColumnstatusBlockingAlgorithm | read-only | current | Flags indicate blocking request by which algorithm per port. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.15 | ColumnstatusLearningAlgorithm | read-only | current | Flags indicate learning request by which algorithm per port. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.16 | ColumnstatusForwardingAlgorithm | read-only | current | Flags indicate forwarding request by which algorithm per port. |
| 1.3.6.1.4.1.3181.10.6.1.81.102.1.17 | ColumnstatusUnauthorizedAlgorithm | read-only | current | Flags indicate use of unauthorized vlan request by which algorithm per port. |