G6-QOS-MIB
37 objects
Microsens private MIB for Generation 6 Ethernet Switches
Imported Objects
| MICROSENS-G6-MIB | g6 |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3181.10.6.2 | Identityprotocol | Microsens private MIB for Generation 6 Ethernet Switches | ||
| 1.3.6.1.4.1.3181.10.6.2.83 | Nodeqos | |||
| 1.3.6.1.4.1.3181.10.6.2.83.1 | ScalarqosEnableQos | read-write | current | Generally enables quality of service functions. |
| 1.3.6.1.4.1.3181.10.6.2.83.2 | TableconfigTable | not-accessible | current | This section configures the base QOS settings. |
| 1.3.6.1.4.1.3181.10.6.2.83.2.1 | RowconfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.83.2.1.1 | ColumnconfigPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.83.2.1.2 | ColumnconfigEnable802dot1p | read-write | current | Enable prioritisation of received packets based on their VLAN priority value according to IEEE 802.1p. |
| 1.3.6.1.4.1.3181.10.6.2.83.2.1.3 | ColumnconfigEnableDiffserv | read-write | current | Enable prioritisation of received packets based on the DSCP value in their IP header. |
| 1.3.6.1.4.1.3181.10.6.2.83.2.1.4 | ColumnconfigPriorityScheme | read-write | current | Selection of prioritsation method. |
| 1.3.6.1.4.1.3181.10.6.2.83.2.1.5 | ColumnconfigForceDefaultPriorityQueue | read-write | current | When enabled the default_priority_queue value is used for this port. |
| 1.3.6.1.4.1.3181.10.6.2.83.2.1.6 | ColumnconfigDefaultPriorityQueue | read-write | current | Default priority value for port. Received packets are handeled according to this setting if VLAN tag and IP header priority is disabled. |
| 1.3.6.1.4.1.3181.10.6.2.83.3 | Tableieee802dot1pPrioMappingTable | not-accessible | current | Mapping of the 8 VLAN priority values on the device internal 4 queues (0-3). 802.1p mapping: Prio 0-7 on Queues 1/0/0/1/2/2/3/3. |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1 | Rowieee802dot1pPrioMappingEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.1 | Columnieee802dot1pPrioMappingIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.2 | Columnieee802dot1pPrioMappingTag0 | read-write | current | Default value: QUEUE_1 |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.3 | Columnieee802dot1pPrioMappingTag1 | read-write | current | Default value: QUEUE_0 |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.4 | Columnieee802dot1pPrioMappingTag2 | read-write | current | Default value: QUEUE_0 |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.5 | Columnieee802dot1pPrioMappingTag3 | read-write | current | Default value: QUEUE_1 |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.6 | Columnieee802dot1pPrioMappingTag4 | read-write | current | Default value: QUEUE_2 |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.7 | Columnieee802dot1pPrioMappingTag5 | read-write | current | Default value: QUEUE_2 |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.8 | Columnieee802dot1pPrioMappingTag6 | read-write | current | Default value: QUEUE_3 |
| 1.3.6.1.4.1.3181.10.6.2.83.3.1.9 | Columnieee802dot1pPrioMappingTag7 | read-write | current | Default value: QUEUE_3 |
| 1.3.6.1.4.1.3181.10.6.2.83.4 | TablediffservPrioMappingTable | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.83.4.1 | RowdiffservPrioMappingEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.83.4.1.1 | ColumndiffservPrioMappingIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.83.4.1.2 | ColumndiffservPrioMappingDscp | read-write | current | Mapping of the 64 DiffServ Codepoints (0-63) on the device internal queues. |
| 1.3.6.1.4.1.3181.10.6.2.83.5 | TablerateShapingTable | not-accessible | current | This section defines optional bandwidth limiting features. |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1 | RowrateShapingEntry | not-accessible | current | |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.1 | ColumnrateShapingPortIndex | not-accessible | current | Automatically generated |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.2 | ColumnrateShapingEgressBandwidthPercent | read-write | current | Limits the outgoing frame rate by extending the interframe gap. Egress rate shaping is independend of the frame type. Provide a percentage value of the selecte… |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.3 | ColumnrateShapingIngressUnicastPercent | read-write | current | Limits the incoming unicast frame rate. Excess unicast frames are dropped and lead to port flow control frames. Provide a percentage value of the selected port… |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.4 | ColumnrateShapingIngressMulticastPercent | read-write | current | Limits the incoming multicast frame rate. Excess multicast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for u… |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.5 | ColumnrateShapingIngressBroadcastPercent | read-write | current | Limits the incoming broadcast frame rate. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for u… |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.6 | ColumnrateShapingIngressUser1Percent | read-write | current | Limits the incoming frames as defined for this group. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 … |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.7 | ColumnrateShapingIngressUser2Percent | read-write | current | Limits the incoming frames as defined for this group. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 … |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.8 | ColumnrateShapingUser1FrameTypes | read-write | current | Select for which frame types igress rate shaping should be applied. |
| 1.3.6.1.4.1.3181.10.6.2.83.5.1.9 | ColumnrateShapingUser2FrameTypes | read-write | current | Select for which frame types igress rate shaping should be applied and which leads to port flow control frames. |