MIB Viewer

G700-MG-MIB

405 objects
A MIB to support the Avaya H248 Media Gateways.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType
LOAD-MIBgenAppFileId genAppFileName genAppFileVersionNumber genOpLastFailureIndex genOpLastWarningDisplay
RFC1155-SMITimeTicks
RFC1213-MIBDisplayString
SNMPv2-SMIBEGIN IMPORTS MODULE-IDENTITY enterprises Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.6889Nodeavaya
1.3.6.1.4.1.6889.1Nodeproducts
1.3.6.1.4.1.6889.1.9Nodeg700MediaGateway
1.3.6.1.4.1.6889.2Nodemibs
1.3.6.1.4.1.6889.2.9Nodeg700MediaGatewayMIB
1.3.6.1.4.1.6889.2.9.1IdentitycmgmibA MIB to support the Avaya H248 Media Gateways.
1.3.6.1.4.1.6889.2.9.1.1NodecmgChassis
1.3.6.1.4.1.6889.2.9.1.1.1ScalarcmgHWTyperead-onlycurrentIndicates the type of component. Where 'media-gateway' refers to G700
1.3.6.1.4.1.6889.2.9.1.1.2ScalarcmgModelNumberread-onlycurrentModel number of this component.
1.3.6.1.4.1.6889.2.9.1.1.3ScalarcmgDescriptionread-onlycurrentDescription of this component: G700 Media Gateway.
1.3.6.1.4.1.6889.2.9.1.1.4ScalarcmgSerialNumberread-onlycurrentSerial number of this gateway.
1.3.6.1.4.1.6889.2.9.1.1.5ScalarcmgHWVintageread-onlycurrentHardware version of this gateway.
1.3.6.1.4.1.6889.2.9.1.1.6ScalarcmgHWSuffixread-onlycurrentHardware vintage suffix of this gateway.
1.3.6.1.4.1.6889.2.9.1.1.7ScalarcmgStackPositionread-onlycurrentPosition of this media gateway in the Cajun stack, counting from the bottom of the stack.
1.3.6.1.4.1.6889.2.9.1.1.8ScalarcmgModuleListread-onlycurrentList of the physical media modules installed in this gateway. Meaning of each octet is as follows. 1 Number of slots; in the G700 Media Gateway this is always …
1.3.6.1.4.1.6889.2.9.1.1.9ScalarcmgResetread-writecurrentSetting the value of this attribute to ON is interpreted as a reset command for the whole chassis. It initiates a complete reinitialisation of the chassis and …
1.3.6.1.4.1.6889.2.9.1.1.10NodecmgHardware
1.3.6.1.4.1.6889.2.9.1.1.10.1ScalarcmgCpuTempread-onlycurrentReading of the internal temperature sensor at the CPU, expressed in degrees Celsius.
1.3.6.1.4.1.6889.2.9.1.1.10.2ScalarcmgCpuTempWarningThreshread-onlycurrentInternal enclosure temperature warning threshold, expressed in degrees Celsius. When the temperature at the CPU sensor exceeds the threshold, a trap is sent to…
1.3.6.1.4.1.6889.2.9.1.1.10.3ScalarcmgCpuTempShutdownThreshread-onlycurrentInternal enclosure temperature shutdown threshold, expressed in degrees Celsius. When the temperature at the CPU sensor exceeds the threshold, a trap is sent t…
1.3.6.1.4.1.6889.2.9.1.1.10.4ScalarcmgDspTempread-onlycurrentReading of the internal temperature sensor at the DSPs, expressed in degrees Celsius.
1.3.6.1.4.1.6889.2.9.1.1.10.5ScalarcmgDspTempWarningThreshread-onlycurrentInternal enclosure temperature warning threshold, expressed in degrees Celsius. When the temperature at the DSP sensor exceeds the threshold, a trap is sent to…
1.3.6.1.4.1.6889.2.9.1.1.10.6ScalarcmgDspTempShutdownThreshread-onlycurrentInternal enclosure temperature shutdown threshold, expressed in degrees Celsius. When the temperature at the DSP sensor exceeds the threshold, a trap is sent t…
1.3.6.1.4.1.6889.2.9.1.1.10.7ScalarcmgPowerMgProcessorread-onlycurrentVoltage reading in millivolts at the power supply serving the Media Gateway main processor. Nominal value is +5100 mV. If the reading falls outside the range 4…
1.3.6.1.4.1.6889.2.9.1.1.10.8ScalarcmgPowerMediaModulesread-onlycurrentVoltage reading in millivolts at the power supply serving the Media Modules. Nominal value is -48000 mV. If the reading falls outside the range -43000 to -5300…
1.3.6.1.4.1.6889.2.9.1.1.10.9ScalarcmgPowerVoipComplexread-onlycurrentVoltage reading in millivolts at the power supply serving the VoIP complexes. Nominal value is +3400 mV. If the reading falls outside the range 3200 to 3600 mV…
1.3.6.1.4.1.6889.2.9.1.1.10.10ScalarcmgPowerDspread-onlycurrentVoltage reading in millivolts at the power supply serving the DSP units, derived from VoIP complex power. Nominal value is +1580 mV. If the reading falls outsi…
1.3.6.1.4.1.6889.2.9.1.1.10.11ScalarcmgPower8260read-onlycurrentVoltage reading in millivolts at the power supply serving the 8260 processor, derived from VoIP complex power. Nominal value is +2500 mV. If the reading falls …
1.3.6.1.4.1.6889.2.9.1.1.10.12ScalarcmgHardwareFaultMaskread-onlycurrentEach bit of this value set to '1' indicates a specific fault in the module. Octets are numbered in the order in which they appear in the PDU. Bits are numbered…
1.3.6.1.4.1.6889.2.9.1.1.10.13ScalarcmgHardwareStatusMaskread-onlycurrentEach bit of this value set to '1' indicates a specific status condition in the module. Octets are numbered in the order in which they appear in the PDU. Bits a…
1.3.6.1.4.1.6889.2.9.1.1.10.14ScalarcmgHardwareFanLowSpeedLevelread-writecurrentThe fan speed level mode. Disable(2) is used for normal operation of two fan speeds. Enable(1) is used to activate additional lower speed level. Default is dis…
1.3.6.1.4.1.6889.2.9.1.1.11NodecmgModules
1.3.6.1.4.1.6889.2.9.1.1.11.1TablecmgModuleTablenot-accessiblecurrentTable of physical media modules in this media gateway.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1RowcmgModuleEntrynot-accessiblecurrentAn entry in the table, representing a single media module.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.1ColumncmgModuleSlotread-onlycurrentSlot number of this module.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.2ColumncmgModuleTyperead-onlycurrentType of this module.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.3ColumncmgModuleDescriptionread-onlycurrentDescription of this media module, e.g. 'Avaya E1/T1 media module with integrated CSU/DSU'
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.4ColumncmgModuleNameread-onlycurrentUser-assigned name of this media module.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.5ColumncmgModuleSerialNumberread-onlycurrentSerial number of this module. The first 12 characters are meaningful. Form is yyLLmmnnnnnn, where yy = last 2 digits of the year of manufacture LL = manufactur…
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.6ColumncmgModuleHWVintageread-onlycurrentHardware vintage of this module.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.7ColumncmgModuleHWSuffixread-onlycurrentHardware vintage suffix of this module.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.8ColumncmgModuleFWVersionread-onlycurrentFirmware version of this module. This duplicates information available in the Load MIB. It shows the media module run image version, plus the VoIP engine versi…
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.9ColumncmgModuleNumberOfPortsread-onlycurrentNumber of physical connectors on this module.
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.10ColumncmgModuleFaultMaskread-onlycurrentEach bit of this value set to '1' indicates a specific fault in the module. Octets are numbered in the order in which they appear in the PDU. Bits are numbered…
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.11ColumncmgModuleStatusMaskread-onlycurrentEach bit of this value set to '1' indicates a specific status condition in the module. Octets are numbered in the order in which they appear in the PDU. Bits a…
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.12ColumncmgModuleResetread-writecurrentSetting the value of this attribute to ON is interpreted as a reset command for the module. It initiates a complete reinitialization of the module and of all t…
1.3.6.1.4.1.6889.2.9.1.1.11.1.1.13ColumncmgModuleNumberOfChannelsread-onlycurrentNumber of communications channels or spans on this module. Earlier Avaya products have referred to T1E1 channels as ports. This media gateway calls them channe…
1.3.6.1.4.1.6889.2.9.1.1.11.2NodecmgDsu
1.3.6.1.4.1.6889.2.9.1.1.11.2.1TablecmgDsuConfigTablenot-accessibleobsoleteConfiguration of E1/T1 DSUs in this media gateway.
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1RowcmgDsuConfigEntrynot-accessibleobsoleteAn entry in the table, representing the configuration of one DSU on a T1/E1 media module.
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.1ColumncmgDsuSlotread-onlyobsoleteSlot number of this DSU.
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.2ColumncmgDsuPortread-onlyobsoletePort number of this DSU.
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.3ColumncmgDsuPortEnableread-writeobsoleteThis object allows a user to take the E1/T1 port out of service for administration. During administration, it may be in an inconsistent state. When administrat…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.4ColumncmgDsuDataFormatread-writeobsoleteData format (channel rate) of this DSU.
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.5ColumncmgDsuFlowControlread-writeobsoleteSpecifies the conditions under which this DSU will send all ones to indicate data port not ready. dtr-rts(1) Monitor both DTR and RTS as described below. If ei…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.6ColumncmgDsuYellowAlarmActionread-writeobsoleteSpecifies the action to take when a yellow alarm is received on the network interface. noAction(1) Ignore yellow alarms. halt(2) Stop transmission and disable …
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.7ColumncmgDsuReceiveClockread-writeobsoleteSpecifies whether data received from the data port is clocked using the DSU internal clock or by an external clock provided by the DTE connected to the port. W…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.8ColumncmgDsuInvertTxCread-writeobsoleteSpecifies whether the clock supplied by the DSU/CSU on the TXC interchange circuit DB (CCITT 114) is phase inverted with respect to the Transmitted Data interc…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.9ColumncmgDsuInvertRxCread-writeobsoleteSpecifies whether the receive clock supplied by the DSU/CSU or DTE is phase inverted.
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.10ColumncmgDsuInvertTxDread-writeobsoleteSpecifies whether the transmitted data stream is logically inverted before being transmitted. This option is useful for applications where HDLC data is being t…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.11ColumncmgDsuInvertRxDread-writeobsoleteSpecifies whether the received data stream is logically inverted. This option is useful for applications where HDLC data is being transported. Inverting the da…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.12ColumncmgDsuPortInitiatedLoopbackread-writeobsoleteSpecifies whether the DSU should accept loopback requests from the DTE port. The local DTE can send an LL or RL signal to the T1/E1 media module in the EIA-530…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.13ColumncmgDsuNetworkInitiatedLoopbackread-writeobsoleteSpecifies whether the DSU should accept in-band loopback requests from the far end, that is, a DSU across the network.
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.14ColumncmgDsuChannelAssignmentsread-writeobsoleteSpecifies which channels are assigned to Voice and which to the DSU. Each bit represents one channel. If the bit is set to 1, the channel is assigned to the DS…
1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.15ColumncmgDsuDataRateread-onlyobsoleteData format (channel rate) of this DSU times the number of channels of type ds0-dsu-channel(5). See cmgChType in cmgChannelTable.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2TablecmgDsuPortStatusTablenot-accessibleobsoleteStatus of E1/T1 DSUs in this media gateway.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1RowcmgDsuPortStatusEntrynot-accessibleobsoleteAn entry in the table, representing the configuration of one DSU on a T1/E1 media module.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.1ColumncmgDsuRTSread-onlyobsoleteState of request-to-send signal from the DTE to the DSU.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.2ColumncmgDsuDTRread-onlyobsoleteState of data-terminal-ready signal from the DTE to the DSU.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.3ColumncmgDsuLLread-onlyobsoleteIs there a DTE local loopback active between the DTE and the DSU?
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.4ColumncmgDsuRLread-onlyobsoleteIs there a remote loopback active in the FPGA?
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.5ColumncmgDsuRLSDread-onlyobsoleteState of the Receive Line Signal Detect from the DSU to the DTE.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.6ColumncmgDsuCTSread-onlyobsoleteState of clear-to-send signal from the DSU to the DTE.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.7ColumncmgDsuDSRread-onlyobsoleteState of data-set-ready signal from the DCE to the DTE.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.8ColumncmgDsuRingread-onlyobsoleteState of the DCE ring indicator signal to the DTE.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.9ColumncmgDsuTestModeread-onlyobsoleteIndicates whether tests are currently in progress.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.10ColumncmgDsuTxDread-onlyobsoleteState of data transmission from the synchronous DTE to the data port on the DSU.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.11ColumncmgDsuRxDread-onlyobsoleteState of data reception at the synchronous DTE from the data port on the DSU/CSU.
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.12ColumncmgDsuFaultMaskread-onlyobsoleteEach bit of this value set to '1' indicates a specific fault in this DSU. Octets are numbered in the order in which they appear in the PDU. Bits are numbered f…
1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.13ColumncmgDsuStatusMaskread-onlyobsoleteEach bit of this value set to '1' indicates a specific status condition in this DSU, or a fault or status condition in its associated CSU. Octets are numbered …
1.3.6.1.4.1.6889.2.9.1.1.11.2.3TablecmgDsuTestTablenot-accessibleobsoleteLoopback tests in effect on DSUs in this media gateway.
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1RowcmgDsuTestEntrynot-accessibleobsoleteAn entry in the table, representing the configuration of one DSU on a T1/E1 media module.
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.1ColumncmgDsuLoopbackPatternread-onlyobsoleteSpecifies the pattern to be sent during a loopback test. allZeroes(1) is most often used to verify B8ZS line encoding. allOnes(2) is most often used to measure…
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.2ColumncmgDsuLocalDteLoopbackread-onlyobsoleteIndicates whether a Local DTE loopback is active, in which a signal received from the DTE is looped back after passing through the transceivers, but before pas…
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.3ColumncmgDsuNearEndDataChannelLoopbackread-onlyobsoleteIndicates whether a Near-end Data Channel loopback is active, in which a signal received from the CSU is looped back after passing through the FIFOs but before…
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.4ColumncmgDsuFarEndDataChannelLoopbackread-onlyobsoleteIndicates whether a Far-end Data Channel loopback is active. This is functionally equivalent to the Near-end Data Channel loopback, except that this loopback w…
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.5ColumncmgDsuRemoteLoopbackread-onlyobsoleteIndicates whether a Remote loopback is active, in which a signal received from the CSU is looped back before entering the FIFOs. This loopback may have been ac…
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.6ColumncmgDsuDataTerminalLoopbackread-onlyobsoleteIndicates whether a Data Terminal loopback is active, in which a signal received from the DTE is looped back after passing through the FIFOs. This loopback can…
1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.7ColumncmgDsuResetread-writeobsoleteSet to on(1) to request reinitialization of the DSU.
1.3.6.1.4.1.6889.2.9.1.1.12NodecmgAnalogPorts
1.3.6.1.4.1.6889.2.9.1.1.12.1TablecmgAnalogPortTablenot-accessiblecurrentTable of analog ports in this media gateway.
1.3.6.1.4.1.6889.2.9.1.1.12.1.1RowcmgAnalogPortEntrynot-accessiblecurrentAn entry in the table, representing a single analog port.
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.1ColumncmgAnalogSlotread-onlycurrentSlot number of this analog port.
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.2ColumncmgAnalogPortread-onlycurrentPort number of this analog port.
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.3ColumncmgAnalogEchoCancellerControlread-writecurrentThe echo canceller control setting for this analog port. auto means that the system will enable or disable the echo canceller as appropriate for each call. fix…
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.4ColumncmgAnalogEchoCancellerConfig1read-writecurrentEcho canceller configuration setting for this analog port (byte 1 of 2). This value is not writeable if cmgAnalogEchoCancellerControl is fixedOn(3) or notSuppo…
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.5ColumncmgAnalogEchoCancellerConfig2read-writecurrentEcho canceller configuration setting for this analog port (byte 2 of 2). This value is not writeable if cmgAnalogEchoCancellerControl is fixedOn(3) or notSuppo…
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.6ColumncmgAnalogBalanceread-writecurrentBalance index.
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.7ColumncmgAnalogReceiveGainread-writecurrentThe receive gain multiplied by 100, for instance -123 indicates -1.23dB.
1.3.6.1.4.1.6889.2.9.1.1.12.1.1.8ColumncmgAnalogTransmitGainread-writecurrentThe transmit gain multiplied by 100, for instance +287 indicates 2.87dB.
1.3.6.1.4.1.6889.2.9.1.1.13NodecmgExpansionUnits
1.3.6.1.4.1.6889.2.9.1.1.13.1TablecmgExpansionUnitsTablenot-accessiblecurrentTable of Expansion Units connected to this media gateway.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1RowcmgExpansionsnot-accessiblecurrentAn entry in the table, representing a single Expansion Unit.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.1ColumncmgExpansionSlotread-onlycurrentExpansion Unit Slot.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.2ColumncmgExpansionModelNumberread-onlycurrentExpansion Unit model.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.3ColumncmgExpansionDescriptionread-onlycurrentExpansion Unit description.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.4ColumncmgExpansionSerialNumberread-onlycurrentExpansion Unit serial number.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.5ColumncmgExpansionHWVintageread-onlycurrentExpansion Unit HW vintage.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.6ColumncmgExpansionHWSuffixread-onlycurrentExpansion Unit HW suffix.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.7ColumncmgExpansionDemandTestread-writecurrentWhen set to on(1), activates on demand test for the Expansion Unit.
1.3.6.1.4.1.6889.2.9.1.1.13.1.1.8ColumncmgExpansionDemandTestResultread-onlycurrentResult of the on demand test for the Expansion Unit. Failure(1) may be the result of a disconnected or bad cable.
1.3.6.1.4.1.6889.2.9.1.1.14ScalarcmgTimeslotMonitoringread-writecurrentTimeslot Monitoring flag. When on, timeslot usage is monitored and traps are sent when thresholds are crossed. Those traps are cmgTimeslotOccupancyFault, cmgTi…
1.3.6.1.4.1.6889.2.9.1.1.15ScalarcmgTimeslotUpperThresholdread-writecurrentTimeslot Upper threshold. The gateway will send trap cmgTimeslotOccupancyFault as soon as the timeslot usage goes above this threshold. This threshold must be …
1.3.6.1.4.1.6889.2.9.1.1.16ScalarcmgTimeslotLowerThresholdread-writecurrentTimeslot Lower threshold. After the gateway has sent a cmgTimeslotOccupancyFault trap, it will send a cmgTimeslotOccupancyClear as soon as the timeslot usage g…
1.3.6.1.4.1.6889.2.9.1.2NodecmgProcessor
1.3.6.1.4.1.6889.2.9.1.2.1NodecmgProcessorConfig
1.3.6.1.4.1.6889.2.9.1.2.1.1ScalarcmgGatewayNumberread-onlycurrentMedia gateway number by which the Call Controller knows this media module.
1.3.6.1.4.1.6889.2.9.1.2.1.2ScalarcmgMACAddressread-onlycurrentMAC address of this processor.
1.3.6.1.4.1.6889.2.9.1.2.1.3ScalarcmgFWVersionread-onlycurrentFirmware version of this gateway.
1.3.6.1.4.1.6889.2.9.1.2.1.4ScalarcmgCurrentIpAddressread-onlycurrentCurrent IP address of this processor. If cmgUseDhcpForIpAddress was on(1) at the time of last startup, this was received from the DHCP server. Otherwise it is …
1.3.6.1.4.1.6889.2.9.1.2.1.7ScalarcmgUseDhcpForIpAddressread-writecurrentSpecifies whether the gateway should get its IP address, default gateway, and subnet mask from the DHCP server, or use the locally administered static IP addre…
1.3.6.1.4.1.6889.2.9.1.2.1.8ScalarcmgUseDhcpForVlanread-writecurrentSpecifies whether the gateway should get its VLAN ID from the DHCP server, or use the locally administered static VLAN ID cmgStatic802Vlan.
1.3.6.1.4.1.6889.2.9.1.2.1.9ScalarcmgDhcpSsonread-writecurrentSpecifies the DHCP Site-Specific Option Number to use with a DHCP request. This gives the DHCP server information about the client's capabilities and propertie…
1.3.6.1.4.1.6889.2.9.1.2.1.10ScalarcmgStaticIpAddressread-writecurrentLocally administered static IP address of this processor. If cmgUseDhcpForIpAddress is on(1), this object is ignored.
1.3.6.1.4.1.6889.2.9.1.2.1.13ScalarcmgDnsServerListread-writecurrentComma-separated list of DNS server IP addresses this processor may use.
1.3.6.1.4.1.6889.2.9.1.2.1.14ScalarcmgDnsHostnameread-onlycurrentDNS Hostname of this processor.
1.3.6.1.4.1.6889.2.9.1.2.1.15ScalarcmgMgpFaultMaskread-onlycurrentEach bit of this value set to '1' indicates a specific fault in the Media Gateway processor. Octets are numbered in the order in which they appear in the PDU. …
1.3.6.1.4.1.6889.2.9.1.2.1.16ScalarcmgCurrentInetAddressTyperead-onlycurrentCurrent IPv6 address type of this processor. The processor can have two IP address one IPv4 and the second IPv6. cmgCurrentIpAddress presents the IPv4 address …
1.3.6.1.4.1.6889.2.9.1.2.1.17ScalarcmgCurrentInetAddressread-onlycurrentThe Inet Address of the processor. 1. The address type of this object is specified in cmgCurrentInetAddressType. 2. Default of cmgCurrentInetAddressType is unk…
1.3.6.1.4.1.6889.2.9.1.2.2NodecmgProcessorQos
1.3.6.1.4.1.6889.2.9.1.2.2.1ScalarcmgQosControlread-onlycurrentSpecifies whether this processor should use the locally administered Quality of Service parameters, or whether it should use the parameters downloaded from the…
1.3.6.1.4.1.6889.2.9.1.2.2.2ScalarcmgRemoteSigDscpread-onlycurrentDiffServ Code Point for signaling traffic on the H.248 link, received from the controller. If cmgQosControl is local(1), this value is ignored.
1.3.6.1.4.1.6889.2.9.1.2.2.3ScalarcmgRemoteSig802Priorityread-onlycurrent802.1 Priority for signaling traffic on the H.248 link, received from the controller. If cmgQosControl is local(1), this value is ignored.
1.3.6.1.4.1.6889.2.9.1.2.2.4ScalarcmgLocalSigDscpread-writecurrentDiffServ Code Point for signaling traffic on the H.248 link, locally administered. If cmgQosControl is remote(2), this value is ignored.
1.3.6.1.4.1.6889.2.9.1.2.2.5ScalarcmgLocalSig802Priorityread-writecurrent802.1 Priority for signaling traffic on the H.248 link, locally administered. If cmgQosControl is remote(2), this value is ignored.
1.3.6.1.4.1.6889.2.9.1.2.2.6ScalarcmgStatic802Vlanread-writecurrent802.1 VLAN ID for this processor, locally administered. If cmgUseDhcpForVlan is on(1), this value is ignored.
1.3.6.1.4.1.6889.2.9.1.2.2.7ScalarcmgCurrent802Vlanread-onlycurrent802.1 VLAN ID currently in use for this processor. If cmgUseDhcpForVlan was on(1) at the last startup, this came from the DHCP server. Otherwise it is equal to…
1.3.6.1.4.1.6889.2.9.1.2.3NodecmgProcessorClock
1.3.6.1.4.1.6889.2.9.1.2.3.1ScalarcmgPrimaryClockSourceread-writecurrentPrimary clock source configured for this processor. If a T1 or BRI module is providing the clock, it reads 'Vs' or 'Vs(pp,pp,...)', where s is slot number and …
1.3.6.1.4.1.6889.2.9.1.2.3.2ScalarcmgSecondaryClockSourceread-writecurrentSecondary clock source configured for this processor. If a T1 or BRI module is providing the clock, it reads 'Vs' or 'Vs(pp,pp,...)', where s is slot number an…
1.3.6.1.4.1.6889.2.9.1.2.3.3ScalarcmgActiveClockSourceread-writecurrentIdentifies the clock source in use at this processor. If cmgClockSourceControl is remote(2), access is read-only. If cmgClockSourceControl is local(1), access …
1.3.6.1.4.1.6889.2.9.1.2.3.4ScalarcmgClockSwitchingread-writecurrentA flag to enable/disable sync switching. If cmgClockSourceControl is remote(2), access is read-only. If cmgClockSourceControl is local(1), access is read-write.
1.3.6.1.4.1.6889.2.9.1.2.3.5ScalarcmgClockSourceControlread-onlycurrentSpecifies whether this processor sync administration parameters are controlled locally or remotely.
1.3.6.1.4.1.6889.2.9.1.3NodecmgControllers
1.3.6.1.4.1.6889.2.9.1.3.1ScalarcmgRegistrationStateread-onlycurrentShows whether this media gateway is currently registered with any call controller.
1.3.6.1.4.1.6889.2.9.1.3.2ScalarcmgActiveControllerAddressread-onlycurrentIPv4 Address of the call controller now serving this media gateway. If cmgRegistrationState is notRegistered(2), this will be '0.0.0.0'. If cmgRegistrationStat…
1.3.6.1.4.1.6889.2.9.1.3.3ScalarcmgH248LinkStatusread-onlycurrentStatus of the H.248 link connecting this media gateway to its active call controller.
1.3.6.1.4.1.6889.2.9.1.3.4ScalarcmgH248LinkErrorCoderead-onlycurrentMost recently received H.248 error code affecting the link between this media gateway and its active call controller. If cmgH248LinkStatus is up(1), this value…
1.3.6.1.4.1.6889.2.9.1.3.5ScalarcmgUseDhcpForMgcListread-writecurrentShould this gateway get its controller IP address from the DHCP server, or should it use the locally administered controller list? If this value is on(1), the …
1.3.6.1.4.1.6889.2.9.1.3.6ScalarcmgStaticControllerHostsread-writecurrentComma-separated list of up to four administered static IPv4 and IPv6 addresses for primary and backup call controllers. IPv4 addresses should be in the form '1…
1.3.6.1.4.1.6889.2.9.1.3.7ScalarcmgDhcpControllerHostsread-onlycurrentList of IP addresses for up to four primary and backup call controllers, received from the DHCP server. An IP address may appear more than once in the list. If…
1.3.6.1.4.1.6889.2.9.1.3.8ScalarcmgPrimarySearchTimeread-writecurrentNumber of minutes for the Primary Search Timer.
1.3.6.1.4.1.6889.2.9.1.3.9ScalarcmgTotalSearchTimeread-writecurrentNumber of minutes for the Total Search Timer.
1.3.6.1.4.1.6889.2.9.1.3.10ScalarcmgTransitionPointread-writecurrentValue of the Transition Point.
1.3.6.1.4.1.6889.2.9.1.3.11ScalarcmgActiveControllerSoftwareVersionread-onlycurrentRelease string of the call controller now serving this media gateway. Release string should be in format 'R015x.02.0.947.0' without patch information. If cmgRe…
1.3.6.1.4.1.6889.2.9.1.3.12ScalarcmgActiveControllerInetAddressTyperead-onlycurrentIPv4/IPv6 Address of the call controller now serving this media gateway. If cmgRegistrationState is notRegistered(2), this will be unknown(0). cmgActiveControl…
1.3.6.1.4.1.6889.2.9.1.3.13ScalarcmgActiveControllerInetAddressread-onlycurrentThe Inet Address of the controller that the gateway is registered to. 1. The address type of this object is specified in cmgActiveControllerInetAddressType. 2.…
1.3.6.1.4.1.6889.2.9.1.4NodecmgVoip
1.3.6.1.4.1.6889.2.9.1.4.1ScalarcmgVoipEngineUseDhcpread-writecurrentDetermines whether VoIP engines use their statically administered IP addresses or whether they get their addresses from the DHCP server.
1.3.6.1.4.1.6889.2.9.1.4.2ScalarcmgVoipQosControlread-onlycurrentThis is the same as cmgQosControl in the MG Processor group. That parameter determines whether the gateway uses voice and signaling QoS parameters administered…
1.3.6.1.4.1.6889.2.9.1.4.3NodecmgVoipRemoteParameters
1.3.6.1.4.1.6889.2.9.1.4.3.1NodecmgVoipRemoteQosParameters
1.3.6.1.4.1.6889.2.9.1.4.3.1.1ScalarcmgVoipRemoteBbeDscpread-onlycurrentThe Better-than-Best-Effort DiffServ code point received from the controller. This is a value to be assigned to the code point part of the Differentiated Servi…
1.3.6.1.4.1.6889.2.9.1.4.3.1.2ScalarcmgVoipRemoteEfDscpread-onlycurrentThe Expedited-Forwarding DiffServ code point received from the controller. This is a value to be assigned to the code point part of the Differentiated Services…
1.3.6.1.4.1.6889.2.9.1.4.3.1.3ScalarcmgVoipRemote802Priorityread-onlycurrentThe 802.1 priority received from the call controller. This is a priority value to be assigned to the tag header for priority-tagged voice frames. See IEEE stan…
1.3.6.1.4.1.6889.2.9.1.4.3.1.4ScalarcmgVoipRemoteMinRtpPortread-onlycurrentThe lower end of the range of UDP ports assigned to voice traffic, received from the call controller. Must be less than or equal to cmgVoipRemoteMaxRtpPort.
1.3.6.1.4.1.6889.2.9.1.4.3.1.5ScalarcmgVoipRemoteMaxRtpPortread-onlycurrentThe upper end of the range of UDP ports assigned to voice traffic, received from the call controller. Must be greater than or equal to cmgVoipRemoteMinRtpPort.
1.3.6.1.4.1.6889.2.9.1.4.3.2NodecmgVoipRemoteRtcpParameters
1.3.6.1.4.1.6889.2.9.1.4.3.2.1ScalarcmgVoipRemoteRtcpEnabledread-onlycurrentA flag that determines whether the Media Gateway will collect and report RTCP statistics. See RFC 1889 for a full description of RTCP. If this value is disable…
1.3.6.1.4.1.6889.2.9.1.4.3.2.2ScalarcmgVoipRemoteRtcpMonitorIpAddressread-onlycurrentThe IPv4 address of an RTCP monitor to which the Media Gateway should report its RTCP statistics. cmgVoipRemoteRtcpMonitorIpAddress will present 0.0.0.0 if no …
1.3.6.1.4.1.6889.2.9.1.4.3.2.3ScalarcmgVoipRemoteRtcpMonitorPortread-onlycurrentThe port on the RTCP monitor to which the Media Gateway should report its RTCP statistics.
1.3.6.1.4.1.6889.2.9.1.4.3.2.4ScalarcmgVoipRemoteRtcpReportPeriodread-onlycurrentThe RTCP reporting interval in seconds.
1.3.6.1.4.1.6889.2.9.1.4.3.2.5ScalarcmgVoipRemoteRtcpMonitorInetAddressTyperead-onlycurrentThe IPv6 address type of an RTCP monitor to which the Media Gateway should report its RTCP statistics. User can define sending RTCP monitor packets to IPv4 hos…
1.3.6.1.4.1.6889.2.9.1.4.3.2.6ScalarcmgVoipRemoteRtcpMonitorInetAddressread-onlycurrentThe IPv6 address of an RTCP monitor to which the Media Gateway should report its RTCP statistics. 1. The address type of this object is specified in cmgVoipRem…
1.3.6.1.4.1.6889.2.9.1.4.3.2.7ScalarcmgVoipRemoteRtcpMonitorPortInetAddressread-onlycurrentThe port on the IPv6 RTCP monitor to which the Media Gateway should report its RTCP statistics.
1.3.6.1.4.1.6889.2.9.1.4.3.3NodecmgVoipRemoteRsvpParameters
1.3.6.1.4.1.6889.2.9.1.4.3.3.1ScalarcmgVoipRemoteRsvpEnabledread-onlycurrentA flag that determines whether the VoIP engines should use RSVP to control call admission. See RFC 2205 for a full description of RSVP. If this value is disabl…
1.3.6.1.4.1.6889.2.9.1.4.3.3.2ScalarcmgVoipRemoteRetryOnFailureread-onlycurrentA flag that determines whether the VoIP engines should retry a reservation request after the first one fails. If this value is disabled(2), the next object wil…
1.3.6.1.4.1.6889.2.9.1.4.3.3.3ScalarcmgVoipRemoteRetryDelayread-onlycurrentThe interval in seconds between a reservation request failure and the subsequent retry. If cmgVoipRemoteRetryOnFailure is disabled(2), this object will be igno…
1.3.6.1.4.1.6889.2.9.1.4.3.3.4ScalarcmgVoipRemoteRsvpProfileread-onlycurrentThe RSVP service model to request.
1.3.6.1.4.1.6889.2.9.1.4.4NodecmgVoipLocalParameters
1.3.6.1.4.1.6889.2.9.1.4.4.1NodecmgVoipLocalQosParameters
1.3.6.1.4.1.6889.2.9.1.4.4.1.1ScalarcmgVoipLocalBbeDscpread-writecurrentThe Better-than-Best-Effort DiffServ code point received from the controller. This is a value to be assigned to the code point part of the Differentiated Servi…
1.3.6.1.4.1.6889.2.9.1.4.4.1.2ScalarcmgVoipLocalEfDscpread-writecurrentThe Expedited-Forwarding DiffServ code point received from the controller. This is a value to be assigned to the code point part of the Differentiated Services…
1.3.6.1.4.1.6889.2.9.1.4.4.1.3ScalarcmgVoipLocal802Priorityread-writecurrentThe 802.1 priority received from the call controller. This is a priority value to be assigned to the tag header for priority-tagged voice frames. See IEEE stan…
1.3.6.1.4.1.6889.2.9.1.4.4.1.4ScalarcmgVoipLocalMinRtpPortread-writecurrentThe lower end of the range of UDP ports assigned to voice traffic, received from the call controller. Must be less than or equal to cmgVoipLocalMaxRtpPort.
1.3.6.1.4.1.6889.2.9.1.4.4.1.5ScalarcmgVoipLocalMaxRtpPortread-writecurrentThe upper end of the range of UDP ports assigned to voice traffic, received from the call controller. Must be greater than or equal to cmgVoipLocalMinRtpPort.
1.3.6.1.4.1.6889.2.9.1.4.4.2NodecmgVoipLocalRtcpParameters
1.3.6.1.4.1.6889.2.9.1.4.4.2.1ScalarcmgVoipLocalRtcpEnabledread-writecurrentA flag that determines whether the Media Gateway will collect and report RTCP statistics. See RFC 1889 for a full description of RTCP. If this value is disable…
1.3.6.1.4.1.6889.2.9.1.4.4.2.2ScalarcmgVoipLocalRtcpMonitorIpAddressread-writecurrentThe IPv4 address of an RTCP monitor to which the Media Gateway should report its RTCP statistics. cmgVoipLocalRtcpMonitorIpAddress will present 0.0.0.0 if no I…
1.3.6.1.4.1.6889.2.9.1.4.4.2.3ScalarcmgVoipLocalRtcpMonitorPortread-writecurrentThe port on the RTCP monitor to which the Media Gateway should report its RTCP statistics.
1.3.6.1.4.1.6889.2.9.1.4.4.2.4ScalarcmgVoipLocalRtcpReportPeriodread-writecurrentThe RTCP reporting interval in seconds.
1.3.6.1.4.1.6889.2.9.1.4.4.2.5ScalarcmgVoipLocalRtcpMonitorInetAddressTyperead-onlycurrentThe IPv6 address type of an RTCP monitor to which the Media Gateway should report its RTCP statistics. User can define sending RTCP monitor packets to IPv4 hos…
1.3.6.1.4.1.6889.2.9.1.4.4.2.6ScalarcmgVoipLocalRtcpMonitorInetAddressread-onlycurrentThe IPv6 address of an RTCP monitor to which the Media Gateway should report its RTCP statistics. 1. The address type of this object is specified in cmgVoipLoc…
1.3.6.1.4.1.6889.2.9.1.4.4.2.7ScalarcmgVoipLocalRtcpMonitorPortInetAddressread-writecurrentThe port on the IPv6 RTCP monitor to which the Media Gateway should report its RTCP statistics.
1.3.6.1.4.1.6889.2.9.1.4.4.3NodecmgVoipLocalRsvpParameters
1.3.6.1.4.1.6889.2.9.1.4.4.3.1ScalarcmgVoipLocalRsvpEnabledread-writecurrentA flag that determines whether the VoIP engines should use RSVP to control call admission. See RFC 2205 for a full description of RSVP. If this value is disabl…
1.3.6.1.4.1.6889.2.9.1.4.4.3.2ScalarcmgVoipLocalRetryOnFailureread-writecurrentA flag that determines whether the VoIP engines should retry a reservation request after the first one fails. If this value is disabled(2), the next object wil…
1.3.6.1.4.1.6889.2.9.1.4.4.3.3ScalarcmgVoipLocalRetryDelayread-writecurrentThe interval in seconds between a reservation request failure and the subsequent retry. If cmgVoipLocalRetryOnFailure is disabled(2), this object will be ignor…
1.3.6.1.4.1.6889.2.9.1.4.4.3.4ScalarcmgVoipLocalRsvpProfileread-writecurrentThe RSVP service model to request.
1.3.6.1.4.1.6889.2.9.1.4.5TablecmgVoipEngineTablenot-accessiblecurrentTable of VoIP engines in the media gateway.
1.3.6.1.4.1.6889.2.9.1.4.5.1RowcmgVoipEngineEntrynot-accessiblecurrentAn entry in the table representing one VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.1ColumncmgVoipSlotread-onlycurrentLocation of this VoIP engine, either a media module slot (1-4 for G700) or the motherboard (100 for G700, 10 for G350, G250). For G450/G430 the index arrangeme…
1.3.6.1.4.1.6889.2.9.1.4.5.1.2ColumncmgVoipMACAddressread-onlycurrentMAC address of the component hosting this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.3ColumncmgVoipStaticIpAddressread-writecurrentAdministered static IPv4 Address of this VoIP engine. If cmgVoipEngineUseDhcp was off(2) at startup time, this value determined the current IPv4 address of the…
1.3.6.1.4.1.6889.2.9.1.4.5.1.4ColumncmgVoipCurrentIpAddressread-onlycurrentIPv4 Address currently in use at this VoIP engine. If cmgVoipEngineUseDhcp was on(2) at startup time, this value was received from the DHCP server. Otherwise i…
1.3.6.1.4.1.6889.2.9.1.4.5.1.5ColumncmgVoipJitterBufferSizeread-onlycurrentSize in bytes of the dynamic jitter buffer at this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.6ColumncmgVoipTotalChannelsread-onlycurrentTotal channels available to this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.7ColumncmgVoipChannelsInUseread-onlycurrentNumber of channels in use at this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.8ColumncmgVoipAverageOccupancyread-onlycurrent5-minute average occupancy of this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.9ColumncmgVoipHyperactivityread-onlycurrentIndicates whether hyperactivity has been detected by this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.10ColumncmgVoipAdminStateread-onlycurrentMaintenance busy-out state of this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.11ColumncmgVoipDspFWVersionread-onlycurrentFirmware version of the DSP complex on this VoIP engine. This is also available in the Load MIB.
1.3.6.1.4.1.6889.2.9.1.4.5.1.12ColumncmgVoipDspStatusread-onlycurrentStatus of the DSP complex on this VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.13ColumncmgVoipEngineResetread-writecurrentSetting the value of this attribute to ON is interpreted as a reset command for the VoIP engine. It initiates a complete reinitialisation of the VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.5.1.14ColumncmgVoipFaultMaskread-onlycurrentEach bit of this value set to '1' indicates a specific fault in the VoIP engine. Octets are numbered in the order in which they appear in the PDU. Bits are num…
1.3.6.1.4.1.6889.2.9.1.4.5.1.15ColumncmgVoipStaticInetAddressTyperead-onlycurrentAdministered static IPv6 Address Type of the VoIP engine. The VoIP Engine Processor can have two IP addresses: one IPv4 and the second IPv6. cmgVoipStaticIpAdd…
1.3.6.1.4.1.6889.2.9.1.4.5.1.16ColumncmgVoipStaticInetAddressread-onlycurrentAdministered static IPv6 Address of the VoIP engine. 1. The address type of this object is specified in cmgVoipStaticInetAddressType. 2. Default of cmgVoipStat…
1.3.6.1.4.1.6889.2.9.1.4.5.1.17ColumncmgVoipCurrentInetAddressTyperead-onlycurrentIPv6 Address Type currently in use at this VoIP engine. The VoIP Engine Processor can have two IP address one IPv4 and the second IPv6. cmgVoipCurrentIpAddress…
1.3.6.1.4.1.6889.2.9.1.4.5.1.18ColumncmgVoipCurrentInetAddressread-onlycurrentIPv6 Address currently in use at this VoIP engine. 1. The address type of this object is specified in cmgVoipCurrentInetAddressType. 2. Default of cmgVoipCurre…
1.3.6.1.4.1.6889.2.9.1.4.6TablecmgVoipDSPCoreTablenot-accessiblecurrentTable representing the DSP cores in VoIP engine of the media gateway.
1.3.6.1.4.1.6889.2.9.1.4.6.1RowcmgVoipDSPCoreEntrynot-accessiblecurrentAn entry in the table representing one DSP Core of a VoIP engine. This table uses an external index from cmgVoIPEngineTable which selects a DSP SoDIMM/engine m…
1.3.6.1.4.1.6889.2.9.1.4.6.1.1ColumncmgDSPCoreCoreIdread-onlycurrentThe DSP core ID within the specific DSP VoIP engine.
1.3.6.1.4.1.6889.2.9.1.4.6.1.2ColumncmgDSPCoreTotalChannelsread-onlycurrentTotal channels available to this DSP core.
1.3.6.1.4.1.6889.2.9.1.4.6.1.3ColumncmgDSPCoreChannelsInUseread-onlycurrentNumber of channels in use at this DSP core.
1.3.6.1.4.1.6889.2.9.1.4.6.1.4ColumncmgDSPCoreAdminStateread-writecurrentMaintenance busy-out state of this DSP core.
1.3.6.1.4.1.6889.2.9.1.4.6.1.5ColumncmgDSPCoreStatusread-onlycurrentStatus of the DSP Core.
1.3.6.1.4.1.6889.2.9.1.4.6.1.6ColumncmgDSPCoreDemandTestread-writecurrentActivates on demand test for the DSP Core.
1.3.6.1.4.1.6889.2.9.1.4.6.1.7ColumncmgDSPCoreDemandTestResultread-onlycurrentResult of the on demand test for the DSP Core.
1.3.6.1.4.1.6889.2.9.1.4.7ScalarcmgVoipEchoCancellerControlread-writecurrentThe echo canceller control setting for all VoIP engines. auto means that the system will enable or disable the echo cancellers as appropriate for each call. fi…
1.3.6.1.4.1.6889.2.9.1.4.8ScalarcmgVoipEchoCancellerConfig1read-writecurrentEcho canceller configuration setting for all VoIP engines (byte 1 of 2). This value may not be writable if the VoIP firmware is old.
1.3.6.1.4.1.6889.2.9.1.4.9ScalarcmgVoipEchoCancellerConfig2read-writecurrentEcho canceller configuration setting for all VoIP engines (byte 2 of 2). This value may not be writable if the VoIP firmware is old.
1.3.6.1.4.1.6889.2.9.1.4.10ScalarcmgVoipTotalChannelsEnforcedByCMread-onlycurrentTotal channels enforced by Communications Manager.
1.3.6.1.4.1.6889.2.9.1.5NodecmgTraps
1.3.6.1.4.1.6889.2.9.1.5.1TablecmgTrapManagerTablenot-accessiblecurrentTable of trap receivers in this media gateway.
1.3.6.1.4.1.6889.2.9.1.5.1.1RowcmgTrapManagerEntrynot-accessiblecurrentAn entry in the table, representing a single trap receiver.
1.3.6.1.4.1.6889.2.9.1.5.1.1.1ColumncmgTrapManagerAddressread-createcurrentIP address of this trap receiver.
1.3.6.1.4.1.6889.2.9.1.5.1.1.3ColumncmgTrapManagerControlread-createcurrentSpecifies whether this trap receiver is currently receiving traps.
1.3.6.1.4.1.6889.2.9.1.5.1.1.4ColumncmgTrapManagerMaskread-createcurrentA bit mask indicating the trap categories of interest to this trap receiver. Bit Category 0 Power warnings 1 Fan and temperature warnings 2 Application faults …
1.3.6.1.4.1.6889.2.9.1.5.1.1.5ColumncmgTrapManagerRowStatusread-createcurrentThe status of this entry in the table. Available states: active(1), createAndGo(4), destroy(6) The cmgTrapManagerAddress of a new entry must be different from …
1.3.6.1.4.1.6889.2.9.1.5.2NodecmgTrapDefinitions
1.3.6.1.4.1.6889.2.9.1.5.2.1NodecmgTrapVariables
1.3.6.1.4.1.6889.2.9.1.5.2.1.1ScalarcmgTrapLocationaccessible-for-notifycurrentLocation of the problem in the form gggVspp, where ggg Media gateway number, or zero if the gateway is not currently registered with any controller. V The lett…
1.3.6.1.4.1.6889.2.9.1.5.2.1.2ScalarcmgTrapOnBoardaccessible-for-notifycurrentExpected values are 'no' and 'yes'. If a problem is on-board, replacing the media module is likely to resolve the problem.
1.3.6.1.4.1.6889.2.9.1.5.2.1.3ScalarcmgTrapSubsystemaccessible-for-notifycurrentThe high-level subsystem that generated the trap. Expected values are 'HW', 'SW', and 'Net'.
1.3.6.1.4.1.6889.2.9.1.5.2.1.4ScalarcmgTrapOnIccMissingread-writecurrentShould the media gateway send a trap on startup if there is no integrated communications controller in slot 1?
1.3.6.1.4.1.6889.2.9.1.5.2.1.5ScalarcmgTrapModuleaccessible-for-notifycurrentA display string to identify the module type in module insert and remove traps.
1.3.6.1.4.1.6889.2.9.1.5.2.1.6ScalarcmgTrapSeverityaccessible-for-notifycurrentThe severity of the notification.
1.3.6.1.4.1.6889.2.9.1.5.2.1.7ScalarcmgProductIdaccessible-for-notifycurrentThe Product Id of Avaya Device - 10 characters.
1.3.6.1.4.1.6889.2.9.1.5.2.1.8ScalarcmgTrapAvailableTimeslotsaccessible-for-notifycurrentNumber of Timeslots available on this gateway.
1.3.6.1.4.1.6889.2.9.1.5.2.1.9ScalarcmgTrapInUseTimeslotsaccessible-for-notifycurrentNumber of Timeslots in use on this gateway.
1.3.6.1.4.1.6889.2.9.1.5.2.1.10ScalarcmgFipsErrorTypeaccessible-for-notifycurrentThe type of FIPS error.
1.3.6.1.4.1.6889.2.9.1.5.2.2NodecmgTrapTypes
1.3.6.1.4.1.6889.2.9.1.5.2.2.0NodecmgTrapV3separator
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.2NotificationcmgMultipleFanFaultcurrentAt least two fans have been operating at less than 90% of their nominal speed for five minutes or more. This may be an early warning of overheating.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.3NotificationcmgMultipleFanClearcurrentAt least three fans are operating normally. The system should be operable indefinitely without overheating.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.4NotificationcmgPsuFanBriefFaultcurrentThe power supply fan has been operating at less than 90% of its optimal speed for 10 minutes or more, but less than 15 minutes. This may be an early warning of…
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.5NotificationcmgPsuFanBriefClearcurrentThe power supply fan is operating normally.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.6NotificationcmgPsuFanProlongedFaultcurrentThe power supply fan has been operating at less than 90% of its optimal speed for 15 minutes or more. This may be an early warning of overheating.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.7NotificationcmgPsuFanProlongedClearcurrentThe power supply fan is operating normally.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.10NotificationcmgCpuTempWarningFaultcurrentThe temperature sensor at the CPU has exceeded its warning threshold.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.11NotificationcmgCpuTempWarningClearcurrentThe temperature sensor at the CPU has dropped below its warning threshold.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.12NotificationcmgDspTempWarningFaultcurrentThe temperature sensor at the DSP complex has exceeded its warning threshold.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.13NotificationcmgDspTempWarningClearcurrentThe temperature sensor at the DSP complex has dropped below its warning threshold.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.14NotificationcmgTempShutdownFaultcurrentThe CPU temperature sensor has exceeded its shutdown threshold. The system is about to begin controlled shutdown.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.16NotificationcmgMgpPowerFaultcurrentThe voltage reading at the +5.1v power source serving the MG Processor is out of tolerance.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.17NotificationcmgMgpPowerClearcurrentThe voltage reading at the +5.1v power source serving the MG Processor is back within its tolerance range.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.18NotificationcmgMediaModulePowerFaultcurrentThe voltage reading at the -48v power source serving the media modules is out of tolerance.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.19NotificationcmgMediaModulePowerClearcurrentThe voltage reading at the -48v power source serving the media modules is back within its tolerance range.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.20NotificationcmgVoipPowerFaultcurrentThe voltage reading at the +3.4v power source serving the VoIP complexes is out of tolerance.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.21NotificationcmgVoipPowerClearcurrentThe voltage reading at the +3.4v power source serving the VoIP complexes is back within its tolerance range.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.22NotificationcmgDspPowerFaultcurrentThe voltage reading at the +1.58v power source serving the DSP units is out of tolerance.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.23NotificationcmgDspPowerClearcurrentThe voltage reading at the +1.58v power source serving the DSP units is back within its tolerance range.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.24Notificationcmg8260PowerFaultcurrentThe voltage reading at the +2.5v power source serving the 8260 processor is out of tolerance.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.25Notificationcmg8260PowerClearcurrentThe voltage reading at the +2.5v power source serving the 8260 processor is back within its tolerance range.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.26NotificationcmgAuxPowerFaultcurrentThe voltage reading at the -48v auxiliary power source serving the end points is out of tolerance.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.27NotificationcmgAuxPowerClearcurrentThe voltage reading at the -48v auxiliary power source serving the end points is back within its tolerance range.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.28NotificationcmgFanPowerFaultcurrentThe voltage at the +12 auxiliary power source serving the fans is out of tolerance.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.29NotificationcmgFanPowerClearcurrentThe voltage at the +12 auxiliary power source serving the fans is back within its tolerance range.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.30NotificationcmgSyncSignalFaultcurrentSynchronization signal lost.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.31NotificationcmgSyncSignalClearcurrentSynchronization signal normal.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.32NotificationcmgVoipHardwareFaultcurrentOne or more of the DSP complexes serving VoIP engines has failed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.33NotificationcmgVoipHardwareClearcurrentAll the DSP complexes serving VoIP engines are back in service.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.34NotificationcmgSyncSignalWarncurrentSynchronization signal lost.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.35NotificationcmgSyncWarnClearcurrentSynchronization signal normal.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.36NotificationcmgSyncSignalExcesscurrentThe synchronization signal source (primary or secondary) is experiencing excessive failures in a short period of time causing excessive switching to an alterna…
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.37NotificationcmgSyncExcessClearcurrentSynchronization signal source which was causing excessive switching due to excessive failures is now normal.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.38NotificationcmgVoipCoreFaultcurrentOne or more of the DSP Cores serving VoIP engines has failed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.39NotificationcmgVoipCoreClearcurrentAll the DSP Cores serving VoIP engines are back in service.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.50NotificationcmgModuleRemovecurrentA media module has been removed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.52NotificationcmgModuleInsertFaultcurrentMedia module insertion sequence has failed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.53NotificationcmgModuleInsertSuccesscurrentA media module has been inserted.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.54NotificationcmgMgBusyoutcurrentAn administrator has moved a media module or port to the busy-out state.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.55NotificationcmgMgReleasecurrentAn administrator has moved a media module or port from the busy-out state back into service.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.56NotificationcmgUnsupportedMmEnrolementcurrentThe event is sent when a module is inserted to a slot where it can be identified but not supported due to hardware limitations.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.57NotificationcmgDataModuleAwohConflictcurrentThis event is generated when a data module is found in a slot that was Administered without hardware as a voice module in the call controller.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.70NotificationcmgFirmwareDownloadBeguncurrentThe media gateway has begun download of a software module.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.71NotificationcmgFirmwareDownloadSuccesscurrentThe media gateway has completed successful download of a software module.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.73NotificationcmgRegistrationSuccesscurrentThe media gateway has successfully registered with a controller.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.74NotificationcmgMgManualResetcurrentThe media gateway is beginning a user-requested reset operation.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.75NotificationcmgModuleManualResetcurrentA media module is beginning a user-requested reset operation.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.76NotificationcmgVoipManualResetcurrentA VoIP engine is beginning a user-requested reset operation.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.77NotificationcmgDsuManualResetobsoleteAn E1/T1 DSU is beginning a user-requested reset operation.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.78NotificationcmgConfigUploadBeguncurrentThe media gateway has begun upload of a configuration file.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.79NotificationcmgConfigUploadSuccesscurrentThe media gateway has completed successful upload of a configuration file.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.90NotificationcmgMemoryFaultcurrentMain processor memory has issued a failure warning.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.91NotificationcmgMemoryClearcurrentMain processor memory is back in normal service.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.92NotificationcmgDhcpRequestFaultcurrentThe media gateway cannot contact its DHCP server, or the server failed to respond to a request.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.93NotificationcmgDhcpRequestClearcurrentThe media gateway has received a successful response to a DHCP request.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.94NotificationcmgFirmwareDownloadFaultcurrentAn attempt to download a software module has failed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.96NotificationcmgProcessRestartcurrentOne or more media gateway software processes have terminated and been restarted by the software task manager.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.97NotificationcmgProcessRestartClearcurrentMedia gateway software processes are running normally.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.98NotificationcmgIccMissingFaultcurrentAn Internal Communications Controller expected in slot 1 is missing.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.99NotificationcmgIccMissingClearcurrentThe Internal Communications Controller expected in slot 1 is present.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.100NotificationcmgIccAutoResetcurrentThe Media gateway has automatically reset the Internal Communications Controller.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.101NotificationcmgIccAutoResetClearcurrentThe Internal Communications Controller is running normally.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.102NotificationcmgPrimaryControllerFaultcurrentThe media gateway cannot contact the first controller in its controller list.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.103NotificationcmgPrimaryControllerClearcurrentThe media gateway has successfully contacted the first controller in its controller list.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.104NotificationcmgNoControllerFaultcurrentThe media gateway cannot contact any controller in its controller lists.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.105NotificationcmgNoControllerClearcurrentThe media gateway has successfully contacted one of the controllers in its controller lists.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.106NotificationcmgRegistrationFaultcurrentThe media gateway cannot register with any controller in its controller list.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.108NotificationcmgH248LinkDowncurrentThe H.248 link between the media gateway and its controller is down.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.109NotificationcmgH248LinkUpcurrentThe H.248 link between the media gateway and its controller is back in service.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.110NotificationcmgTestFaultcurrentA maintenance test has failed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.111NotificationcmgTestClearcurrentFailed maintenance tests have succeeded.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.112NotificationcmgTestThresholdFaultcurrentMaintenance test failure count has exceeded its reporting threshold.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.113NotificationcmgTestThresholdClearcurrentMaintenance test failure count has dropped below its reporting threshold.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.114NotificationcmgMgAutoResetcurrentThe media gateway is beginning automatic reinitialization.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.116NotificationcmgModuleAutoResetcurrentOne of the media modules is beginning automatic reinitialization.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.117NotificationcmgModuleAutoResetClearcurrentThe reset media module is running normally.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.118NotificationcmgModulePostFaultcurrentA media module has failed its power-on startup test.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.119NotificationcmgModulePostClearcurrentMedia module power-on startup test successful.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.120NotificationcmgModuleParameterFaultcurrentA media module has failed its parameter exchange.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.121NotificationcmgModuleParameterClearcurrentMedia module parameter exchange successful.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.122NotificationcmgConfigUploadFaultcurrentAn attempt to upload a configuration file has failed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.124NotificationcmgVoipOccFaultcurrentOne or more of the VoIP engines in the media gateway is over its occupancy threshold, as measured by a snapshot: (Channels In Use)/(Total Channels).
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.125NotificationcmgVoipOccClearcurrentAll the VoIP engines in the media gateway are operating below occupancy threshold, as measured by a snapshot: (Channels In Use)/(Total Channels).
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.126NotificationcmgVoipAvgOccFaultcurrentOne or more of the VoIP engines in the media gateway is over its average occupancy threshold.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.127NotificationcmgVoipAvgOccClearcurrentAll the VoIP engines in the media gateway are operating below occupancy threshold, as measured by a snapshot: (Channels In Use)/(Total Channels).
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.128NotificationcmgVoipAutoResetcurrentA VoIP engine has begun automatic reset.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.129NotificationcmgVoipAutoResetClearcurrentA VoIP engine has completed automatic reset, and is running normally.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.130NotificationcmgDsuFpgaConfigureFaultobsoleteThe DSU in one of the E1/T1 media modules failed to configure its Field Programmable Gateway Array.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.131NotificationcmgDsuFpgaConfigureClearobsoleteThe DSU in one of the E1/T1 media modules has successfully configured its Field Programmable Gateway Array.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.132NotificationcmgDsuAutoResetobsoleteA DSU in one of the E1/T1 media modules has begun automatic reset.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.133NotificationcmgDsuAutoResetClearobsoleteA DSU in one of the E1/T1 media modules has completed automatic reset, and is running normally.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.134NotificationcmgDsuDteDtrFaultobsoleteOne of the E1/T1 media modules has detected that the DTR signal from its DTE is off. This indicates that the DTE is not connected or not functioning.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.135NotificationcmgDsuDteDtrClearobsoleteOne of the E1/T1 media modules has detected that the DTR signal from its DTE is back to normal.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.136NotificationcmgDsuDteRtsFaultobsoleteAn E1/T1 media module has detected that the RTS signal from its DTE is not on whenever the DTE requests to send data and during data transfer. This indicates t…
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.137NotificationcmgDsuDteRtsClearobsoleteAn E1/T1 media module has detected that the RTS signal from its DTE is back to normal.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.138NotificationcmgDsuTxDFaultobsoleteAn E1/T1 media module has detected that the data received from the local DTE to be sent to the far end is either all ones or all zeroes.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.139NotificationcmgDsuTxDClearobsoleteThe E1/T1 media module is receiving normal data from the local DTE to be sent to the far end.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.140NotificationcmgDsuRxDFailureobsoleteAn E1/T1 media module has detected that the data received from the far end to be sent to the local DTE is either all ones or all zeroes.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.141NotificationcmgDsuRxDClearobsoleteThe E1/T1 media module is receiving normal data from the far end to be sent to the local DTE.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.142NotificationcmgVoipIpConfigFaultcurrentThere is an IP configuration failure in the VoIP Engine. No static IP address has been supplied or the firmware is getting indications that this is a duplicate…
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.143NotificationcmgVoipIpConfigClearcurrentThe IP configuration of the VoIP Engine is successful.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.144NotificationcmgConfigDownloadFaultcurrentAn attempt to download a configuration file has failed.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.145NotificationcmgConfigDownloadBeguncurrentThe media gateway has begun download of a configuration file.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.146NotificationcmgConfigDownloadSuccesscurrentThe media gateway has completed successful download of a configuration file.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.147NotificationcmgTimeslotOccupancyFaultcurrentTimeslot usage is over the occupancy threshold, as measured by a snapshot: (Timeslots In Use)/(Total Timeslots).
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.148NotificationcmgTimeslotOccupancyClearcurrentTimeslot usage is below the occupancy threshold, as measured by a snapshot: (Timeslots In Use)/(Total Timeslots).
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.149NotificationcmgTimeslotAvailabilityFaultcurrentNo more Timeslot are available on this gateway.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.150NotificationcmgTimeslotAvailabilityClearcurrentTimeslots are again available on this gateway, usage is below the occupancy threshold, as measured by a snapshot: (Timeslots In Use)/(Total Timeslots).
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.151NotificationcmgRegistrationSuccessInetAddresscurrentThe media gateway has successfully registered with a controller. This trap is identical to cmgRegistrationSuccess but with INET Address varbind instead of IPv4…
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.152NotificationcmgRegistrationFaultInetAddresscurrentThe media gateway cannot register with any controller in its controller list. This trap is identical to cmgRegistrationFault but with INET Address varbind inst…
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.153NotificationcmgDs1Layer2DowncurrentISDN Layer-2 is down on a Ds1.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.154NotificationcmgDs1Layer2UpcurrentISDN Layer-2 is established on a Ds1.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.155NotificationcmgFipsErrorModecurrentThe Gateway is in FIPS error mode.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.156NotificationcmgCertErrorCertRevokedcurrentA Gateway TLS Certificate was revoked.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.157NotificationcmgCrlAccessDeniedcurrentThe Gateway could not access a Certificate Revocation List.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.158NotificationcmgCrlFileSizecurrentThe Gateway could not download a Certificate Revocation List due to filesystem limitations.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.159NotificationcmgCertErrorCertExpiredcurrentA Gateway TLS Certificate has expired.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.160NotificationcmgCertErrorNearExpirycurrentA Gateway TLS Certificate is near expiry and should be updated.
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.161NotificationcmgCertErrorIdAuthenticationcurrentA Gateway TLS Certificate could not be authenticated
1.3.6.1.4.1.6889.2.9.1.5.2.2.0.162NotificationcmgOcspAccessDeniedcurrentThe Gateway could not access an OCSP Responder.
1.3.6.1.4.1.6889.2.9.1.5.2.2.95NotificationcmgFirmwareDownloadWarningcurrentNon critical event occur during attempt to download a software module.
1.3.6.1.4.1.6889.2.9.1.6NodecmgContactClosures
1.3.6.1.4.1.6889.2.9.1.6.1TablecmgContactClosuresTablenot-accessiblecurrentThis table is used for managing contact closure adjunct port. The adjunct box contains two relays.
1.3.6.1.4.1.6889.2.9.1.6.1.1RowcmgContactClosuresEntrynot-accessiblecurrent
1.3.6.1.4.1.6889.2.9.1.6.1.1.1ColumncmgCcModuleread-onlycurrent
1.3.6.1.4.1.6889.2.9.1.6.1.1.2ColumncmgCcPortread-onlycurrent
1.3.6.1.4.1.6889.2.9.1.6.1.1.3ColumncmgCcRelayread-onlycurrentEach contact closure port can control two relays on the adjunct
1.3.6.1.4.1.6889.2.9.1.6.1.1.4ColumncmgCcAdminStateread-writecurrentThe admin state of the contact-closure where: Auto(1): The Contact Closure is controlled by the call Controller. Trigger(2): The contact closure relay is trigg…
1.3.6.1.4.1.6889.2.9.1.6.1.1.5ColumncmgCcPulseDurationread-writecurrentThe number of second the relay is triggred after each pulse activation signal is received from the call-controller.
1.3.6.1.4.1.6889.2.9.1.6.1.1.6ColumncmgCcStatusread-onlycurrentThe actual contact closure relay state
1.3.6.1.4.1.6889.2.9.1.7NodecmgETR
1.3.6.1.4.1.6889.2.9.1.7.1TablecmgETRTablenot-accessiblecurrentEmergency Transfer Function Table (short circuit Line and Trunk ports in case of call-controller connectivity problems)
1.3.6.1.4.1.6889.2.9.1.7.1.1RowcmgETREntrynot-accessiblecurrent
1.3.6.1.4.1.6889.2.9.1.7.1.1.1ColumncmgEtrModuleread-onlycurrentModule number - 10 on G450
1.3.6.1.4.1.6889.2.9.1.7.1.1.2ColumncmgEtrAdminStateread-writecurrentModule's ETR administration state where: off(1): ETR is turned off without checking if there is an active call among trunk-line port pairs auto(2): ETR is turn…
1.3.6.1.4.1.6889.2.9.1.7.1.1.3ColumncmgEtrNumberOfPairsread-onlycurrentThe number of ETR TRUNK-LINE pairs
1.3.6.1.4.1.6889.2.9.1.7.1.1.4ColumncmgEtrStatusread-onlycurrentThe current status of the ETR function
1.3.6.1.4.1.6889.2.9.1.7.1.1.5ColumncmgEtrCurrentLoopDetectread-writecurrentEach bit in the bit-mask represents a current-loop-detector of one trunk-line ETR pairs. The bit is set when current is detected
1.3.6.1.4.1.6889.2.9.1.8NodecmgDynamicCAC
1.3.6.1.4.1.6889.2.9.1.8.1ScalarcmgDynCacStatusread-onlycurrentDynamic CAC status
1.3.6.1.4.1.6889.2.9.1.8.2ScalarcmgDynCacRBBLread-onlycurrentThe last Reported BBL value sent to the MGC
1.3.6.1.4.1.6889.2.9.1.8.3ScalarcmgDynCacLastUpdateread-onlycurrentThe last time (sysUpTime) a 'dynamic CAC' event was sent to the MGC
1.3.6.1.4.1.6889.2.9.1.9NodecmgSLAMonitor
1.3.6.1.4.1.6889.2.9.1.9.1ScalarcmgSLAMonitorStateread-writecurrentThe current state of the SLA Monitor.
1.3.6.1.4.1.6889.2.9.1.9.2ScalarcmgSLAMonitorServerInetAddressTyperead-onlycurrentThe IP address type (IPv4 or IPv6) of this SLA Monitor server.
1.3.6.1.4.1.6889.2.9.1.9.3ScalarcmgSLAMonitorServerInetAddressread-onlycurrentThe IPv4 or IPv6 address of the SLA Monitor server.
1.3.6.1.4.1.6889.2.9.1.9.4ScalarcmgSLAMonitorServerPortread-onlycurrentThe SLA Monitor server port.
1.3.6.1.4.1.6889.2.9.1.9.10ScalarcmgSLAMonitorPacketCaptureModeread-writecurrentThe SLA Monitor packet capture mode.
1.3.6.1.4.1.6889.2.9.1.9.99ScalarcmgSLAMonitorVersionread-onlycurrentThe SLA Monitor firmware version.
Type Definitions
NameSyntaxStatusDescription
CmgItuPerceivedSeverityINTEGER { cleared (1), indeterminate (2), critical (3), major (4), minor (5), warning (6) }currentITU perceived severity values
CmgModuleSlotINTEGER (1..9)currentgateway module slot number
MIB Viewer