G9981-MIB
63 objects
The objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces using ATM inverse multiplexing, as defined in ITU-T Recommendation G.998.1 (G.Bond/ATM). This MIB module MUST be used in conjunction with the GBOND-MIB module, common to all G.Bond technologies. The following references are used throughout this MIB module: [G.998.1] refers to: ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding', January 2005. [TR-159] refers to: Broadband Forum Technical Report: 'Management Framework for xDSL Bonding', December 2008. Naming Conventions: ATM - Asynchronous Transfer Mode BCE - Bonding Channel Entity BTU - Bonding Terminating Unit CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sub-layer GBS-C - Generic Bonding Sub-layer, CO side GBS-R - Generic Bonding Sub-layer, RT (or CPE) side PM - Performance Monitoring RT - Remote Terminal SNR - Signal to Noise Ratio SES - Severely Errored Seconds UAS - Unavailable Seconds Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Imported Objects
| HC-PerfHist-TC-MIB | -- RFC 2863 HCPerfCurrentCount HCPerfIntervalCount HCPerfInvalidIntervals HCPerfTimeElapsed HCPerfValidIntervals |
| IF-MIB | -- RFC 2580 ifIndex |
| SNMPv2-CONF | -- RFC 2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.208 | Identityg9981MIB | The objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces using ATM inverse multiplexing, as defined in ITU-T Recommendation G.99… | ||
| 1.3.6.1.2.1.208.1 | Nodeg9981Objects | |||
| 1.3.6.1.2.1.208.1.1 | Nodeg9981Port | |||
| 1.3.6.1.2.1.208.1.1.0 | Nodeg9981PortNotifications | |||
| 1.3.6.1.2.1.208.1.1.0.1 | Notificationg9981UpDiffDelayToleranceExceeded | current | This notification indicates that the maximum upstream differential delay has exceeded the max upstream differential delay threshold, specified by g9981PortConf… | |
| 1.3.6.1.2.1.208.1.1.0.2 | Notificationg9981DnDiffDelayToleranceExceeded | current | This notification indicates that the maximum downstream differential delay has exceeded the max downstream differential delay threshold, specified by g9981Port… | |
| 1.3.6.1.2.1.208.1.1.1 | Tableg9981PortConfTable | not-accessible | current | Table for configuration of G.Bond/ATM ports. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.2.1.208.1.1.1.1 | Rowg9981PortConfEntry | not-accessible | current | An entry in the G.Bond/ATM Port Configuration table. Each entry represents a G.Bond/ATM port indexed by the ifIndex. Additional configuration parameters are av… |
| 1.3.6.1.2.1.208.1.1.1.1.1 | Columng9981PortConfUpDiffDelayTolerance | read-write | current | A maximum tolerated upstream differential delay (among the member BCEs) of a G.Bond/ATM port, expressed in ms. This object is read-write for the GBS-C ports. I… |
| 1.3.6.1.2.1.208.1.1.1.1.2 | Columng9981PortConfDnDiffDelayTolerance | read-write | current | A maximum tolerated downstream differential delay (among the member BCEs) of a G.Bond/ATM port, expressed in ms. This object is read-write for the GBS-C ports.… |
| 1.3.6.1.2.1.208.1.1.1.1.3 | Columng9981PortConfDiffDelayToleranceExceededEnable | read-write | current | Indicates whether g9981UpDiffDelayToleranceExceeded and g9981DnDiffDelayToleranceExceeded notifications should be generated for G.Bond/ATM port. A value of tru… |
| 1.3.6.1.2.1.208.1.1.2 | Tableg9981PortStatTable | not-accessible | current | This table provides overall status information of G.Bond/ATM ports, complementing the generic status information from the ifTable of the IF-MIB and the gBondFl… |
| 1.3.6.1.2.1.208.1.1.2.1 | Rowg9981PortStatEntry | not-accessible | current | An entry in the G.Bond/ATM Port Status table. Each entry represents a G.Bond/ATM port indexed by the ifIndex. Note that a GBS port runs on top of a single or m… |
| 1.3.6.1.2.1.208.1.1.2.1.1 | Columng9981PortStatRxLostCells | read-only | current | The number of lost ATM cells detected by the G.Bond/ATM port in the receive direction (e.g., upstream direction for a GBS-C port). Discontinuities in the value… |
| 1.3.6.1.2.1.208.1.1.2.1.2 | Columng9981PortStatTxLostCells | read-only | current | The number of lost ATM cells detected by the peer G.Bond/ATM port in the receive direction, i.e., downstream direction for a GBS-C port. This object is irrelev… |
| 1.3.6.1.2.1.208.1.1.2.1.3 | Columng9981PortStatMaxUpDiffDelay | read-only | current | Current maximum upstream differential delay between all operational BCEs in the G.Bond/ATM bonding group, measured in units of 0.1 ms. This object is read-only… |
| 1.3.6.1.2.1.208.1.1.2.1.4 | Columng9981PortStatMaxDnDiffDelay | read-only | current | Current maximum downstream differential delay between all operational BCEs in the G.Bond/ATM bonding group, measured in units of 0.1 ms. This object is read-on… |
| 1.3.6.1.2.1.208.1.1.3 | Nodeg9981PM | |||
| 1.3.6.1.2.1.208.1.1.3.1 | Tableg9981PortPmCurTable | not-accessible | current | This table contains current Performance Monitoring information for a G.Bond/ATM port. This table contains live data from the equipment and as such is NOT persi… |
| 1.3.6.1.2.1.208.1.1.3.1.1 | Rowg9981PortPmCurEntry | not-accessible | current | An entry in the G.Bond/ATM Port PM table. Each entry represents a G.Bond/ATM port indexed by the ifIndex. |
| 1.3.6.1.2.1.208.1.1.3.1.1.1 | Columng9981PortPmCur15MinValidIntervals | read-only | current | A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute … |
| 1.3.6.1.2.1.208.1.1.3.1.1.2 | Columng9981PortPmCur15MinInvalidIntervals | read-only | current | A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the … |
| 1.3.6.1.2.1.208.1.1.3.1.1.3 | Columng9981PortPmCur15MinTimeElapsed | read-only | current | A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval. This object partially maps to the TR-159 attr… |
| 1.3.6.1.2.1.208.1.1.3.1.1.4 | Columng9981PortPmCur15MinRxLostCells | read-only | current | A read-only count of lost ATM cells detected by a G.Bond/ATM port (e.g., the GBS-C) in the receive direction, during the current 15-minute performance history … |
| 1.3.6.1.2.1.208.1.1.3.1.1.5 | Columng9981PortPmCur15MinTxLostCells | read-only | current | A read-only count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the current 15-minute performance history in… |
| 1.3.6.1.2.1.208.1.1.3.1.1.6 | Columng9981PortPmCur15MinUpDiffDelay | read-only | current | A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current… |
| 1.3.6.1.2.1.208.1.1.3.1.1.7 | Columng9981PortPmCur15MinDnDiffDelay | read-only | current | A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS-C (as perceived by the GBS-R), measured in units… |
| 1.3.6.1.2.1.208.1.1.3.1.1.8 | Columng9981PortPmCur1DayValidIntervals | read-only | current | A read-only number of 1-day intervals for which data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collect… |
| 1.3.6.1.2.1.208.1.1.3.1.1.9 | Columng9981PortPmCur1DayInvalidIntervals | read-only | current | A read-only number of 1-day intervals for which data was not always available. The value will typically be zero, except in cases where the data for some interv… |
| 1.3.6.1.2.1.208.1.1.3.1.1.10 | Columng9981PortPmCur1DayTimeElapsed | read-only | current | A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval. |
| 1.3.6.1.2.1.208.1.1.3.1.1.11 | Columng9981PortPmCur1DayRxLostCells | read-only | current | A read-only count of lost ATM cells detected by the G.Bond/ATM port (e.g., the GBS-C) during the current 1-day performance interval. This object is inhibited d… |
| 1.3.6.1.2.1.208.1.1.3.1.1.12 | Columng9981PortPmCur1DayTxLostCells | read-only | current | A read-only count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the current 1-day performance history interv… |
| 1.3.6.1.2.1.208.1.1.3.1.1.13 | Columng9981PortPmCur1DayUpDiffDelay | read-only | current | A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current… |
| 1.3.6.1.2.1.208.1.1.3.1.1.14 | Columng9981PortPmCur1DayDnDiffDelay | read-only | current | A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the curre… |
| 1.3.6.1.2.1.208.1.1.3.2 | Tableg9981PortPm15MinTable | not-accessible | current | This table contains historical 15-minute buckets of Performance Monitoring information for a G.Bond/ATM port (a row for each 15-minute interval, up to 96 inter… |
| 1.3.6.1.2.1.208.1.1.3.2.1 | Rowg9981PortPm15MinEntry | not-accessible | current | An entry in the G.Bond/ATM Port historical 15-minute PM table. Each entry represents Performance Monitoring data for a G.Bond/ATM port, indexed by the ifIndex,… |
| 1.3.6.1.2.1.208.1.1.3.2.1.1 | Columng9981PortPm15MinIntervalIndex | not-accessible | current | Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object partially maps… |
| 1.3.6.1.2.1.208.1.1.3.2.1.2 | Columng9981PortPm15MinIntervalMoniTime | read-only | current | A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (900 seconds), except… |
| 1.3.6.1.2.1.208.1.1.3.2.1.3 | Columng9981PortPm15MinIntervalRxLostCells | read-only | current | A read-only count of lost ATM cells detected by a G.Bond/ATM port (e.g., the GBS-C) in the receive direction, during the 15-minute performance history interval… |
| 1.3.6.1.2.1.208.1.1.3.2.1.4 | Columng9981PortPm15MinIntervalTxLostCells | read-only | current | A read-only count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the 15-minute performance history interval. … |
| 1.3.6.1.2.1.208.1.1.3.2.1.5 | Columng9981PortPm15MinIntervalUpDiffDelay | read-only | current | A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS, measured in units of 0.1 ms, during the 15-minute… |
| 1.3.6.1.2.1.208.1.1.3.2.1.6 | Columng9981PortPm15MinIntervalDnDiffDelay | read-only | current | A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS, as perceived by its peer port, measured in unit… |
| 1.3.6.1.2.1.208.1.1.3.2.1.7 | Columng9981PortPm15MinIntervalValid | read-only | current | A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). … |
| 1.3.6.1.2.1.208.1.1.3.3 | Tableg9981PortPm1DayTable | not-accessible | current | This table contains historical 1-day buckets of Performance Monitoring information for a G.Bond/ATM port (a row for each 1-day interval, up to 7 intervals). En… |
| 1.3.6.1.2.1.208.1.1.3.3.1 | Rowg9981PortPm1DayEntry | not-accessible | current | An entry in the G.Bond/ATM Port historical 1-day PM table. Each entry represents Performance Monitoring data for such a port, indexed by the ifIndex, collected… |
| 1.3.6.1.2.1.208.1.1.3.3.1.1 | Columng9981PortPm1DayIntervalIndex | not-accessible | current | Performance data interval number. 1 is the most recent previous interval; interval 7 is 24 hours ago. Intervals 2..7 are OPTIONAL. This object partially maps t… |
| 1.3.6.1.2.1.208.1.1.3.3.1.2 | Columng9981PortPm1DayIntervalMoniTime | read-only | current | A count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), except in a si… |
| 1.3.6.1.2.1.208.1.1.3.3.1.3 | Columng9981PortPm1DayIntervalRxLostCells | read-only | current | A count of lost ATM cells detected by the G.Bond/ATM port (e.g., the GBS-C) during the 1-day performance history interval. This object is inhibited during Seve… |
| 1.3.6.1.2.1.208.1.1.3.3.1.4 | Columng9981PortPm1DayIntervalTxLostCells | read-only | current | A count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the 1-day performance history interval. This object is… |
| 1.3.6.1.2.1.208.1.1.3.3.1.5 | Columng9981PortPm1DayIntervalUpDiffDelay | read-only | current | A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the 1-day p… |
| 1.3.6.1.2.1.208.1.1.3.3.1.6 | Columng9981PortPm1DayIntervalDnDiffDelay | read-only | current | A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the 1-day… |
| 1.3.6.1.2.1.208.1.1.3.3.1.7 | Columng9981PortPm1DayIntervalValid | read-only | current | A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). … |
| 1.3.6.1.2.1.208.2 | Nodeg9981Conformance | |||
| 1.3.6.1.2.1.208.2.1 | Nodeg9981Groups | |||
| 1.3.6.1.2.1.208.2.1.1 | Groupg9981BasicGroup | current | A collection of objects representing management information for a G.Bond/ATM port. | |
| 1.3.6.1.2.1.208.2.1.2 | Groupg9981AlarmConfGroup | current | A collection of objects required for configuration of alarm thresholds and notifications in G.Bond/ATM ports. | |
| 1.3.6.1.2.1.208.2.1.3 | Groupg9981NotificationGroup | current | This group supports notifications of significant conditions associated with G.Bond/ATM ports. | |
| 1.3.6.1.2.1.208.2.1.4 | Groupg9981PerfCurrGroup | current | A collection of objects supporting OPTIONAL current Performance Monitoring information for G.Bond/ATM ports. | |
| 1.3.6.1.2.1.208.2.1.5 | Groupg9981Perf15MinGroup | current | A collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond/ATM ports, during previous 15-minute intervals. | |
| 1.3.6.1.2.1.208.2.1.6 | Groupg9981Perf1DayGroup | current | A collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond/ATM ports, during previous 1-day intervals. | |
| 1.3.6.1.2.1.208.2.2 | Nodeg9981Compliances | |||
| 1.3.6.1.2.1.208.2.2.1 | Complianceg9981Compliance | current | The compliance statement for G.Bond/ATM interfaces. Compliance with the following external compliance statements is REQUIRED: MIB Module Compliance Statement I… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MilliSeconds | Unsigned32 | current | Represents time unit value in milliseconds. |