G9983-MIB
108 objects
The objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces using time-division inverse multiplexing (TDIM), as defined in ITU-T Recommendation G.998.3 (G.Bond/TDIM). This MIB module MUST be used in conjunction with the GBOND-MIB module, common to all G.Bond technologies. The following references are used throughout this MIB module: [G.998.3] refers to: ITU-T Recommendation G.998.3: 'Multi-pair bonding using time-division inverse multiplexing', January 2005. [TR-159] refers to: Broadband Forum Technical Report: 'Management Framework for xDSL Bonding', December 2008. Naming Conventions: BCE - Bonding Channel Entity BTU - Bonding Terminating Unit BTU-C - Bonding Terminating Unit, CO side BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sub-layer GBS-C - Generic Bonding Sub-layer, CO side GBS-R - Generic Bonding Sub-layer, Remote Terminal (CPE) side SNR - Signal to Noise Ratio Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Imported Objects
| HC-PerfHist-TC-MIB | -- RFC 2863 HCPerfCurrentCount HCPerfIntervalCount HCPerfInvalidIntervals HCPerfTimeElapsed HCPerfValidIntervals |
| IF-MIB | -- RFC 2580 ifIndex InterfaceIndex |
| SNMPv2-CONF | -- RFC 2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TEXTUAL-CONVENTION RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.210 | Identityg9983MIB | The objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces using time-division inverse multiplexing (TDIM), as defined in ITU-T Re… | ||
| 1.3.6.1.2.1.210.1 | Nodeg9983Objects | |||
| 1.3.6.1.2.1.210.1.1 | Nodeg9983Port | |||
| 1.3.6.1.2.1.210.1.1.0 | Nodeg9983PortNotifications | |||
| 1.3.6.1.2.1.210.1.1.0.1 | Notificationg9983SvcUp | current | This notification indicates that a service, indicated by the g9983OperSvcIdx (mapped to a particular interface indicated by the g9983SvcIfIdx), in a particular… | |
| 1.3.6.1.2.1.210.1.1.0.2 | Notificationg9983SvcDown | current | This notification indicates that a service indicated by the g9983OperSvcIdx (mapped to a particular interface indicated by the g9983SvcIfIdx) in a particular G… | |
| 1.3.6.1.2.1.210.1.1.1 | Tableg9983PortConfTable | not-accessible | current | Table for configuration of G.Bond/TDIM ports. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.2.1.210.1.1.1.1 | Rowg9983PortConfEntry | not-accessible | current | An entry in the G.Bond/TDIM Port Configuration table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex. Additional configuration parameters are … |
| 1.3.6.1.2.1.210.1.1.1.1.1 | Columng9983PortConfFecAdminState | read-write | current | A desired state of the OPTIONAL Forward Error Correction (FEC) function of the G.Bond/TDIM port. A value of 'false' indicates that the FEC function SHALL be di… |
| 1.3.6.1.2.1.210.1.1.1.1.2 | Columng9983PortConfFecWordSize | read-write | current | A FEC code word size, in octets, for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the GBS-R. … |
| 1.3.6.1.2.1.210.1.1.1.1.3 | Columng9983PortConfFecRedundancySize | read-write | current | A FEC redundancy word size, in octets, for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the G… |
| 1.3.6.1.2.1.210.1.1.1.1.4 | Columng9983PortConfFecInterleaverType | read-write | current | An Interleaver type for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the GBS-R. A value of no… |
| 1.3.6.1.2.1.210.1.1.1.1.5 | Columng9983PortConfFecInterleaverDepth | read-write | current | An Interleaver depth for G.Bond/TDIM ports supporting the FEC function. This object is read-write for the GBS-C ports and read-only for the GBS-R. A value of z… |
| 1.3.6.1.2.1.210.1.1.1.1.6 | Columng9983PortConfAdminServices | read-write | current | Desired list of services for a G.Bond/TDIM port. This object is a list of pointers to entries in the g9983SvcTable. The value of this object is a continuous or… |
| 1.3.6.1.2.1.210.1.1.1.1.7 | Columng9983PortConfSvcUpDownEnable | read-write | current | Indicates whether g9983SvcUp and g9983SvcDown notifications should be generated for this interface. A value of true(1) indicates that the notifications are ena… |
| 1.3.6.1.2.1.210.1.1.2 | Tableg9983PortCapTable | not-accessible | current | Table for capabilities of G.Bond/TDIM ports. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.2.1.210.1.1.2.1 | Rowg9983PortCapEntry | not-accessible | current | An entry in the G.Bond/TDIM Port Capability table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex. Additional capabilities are available via t… |
| 1.3.6.1.2.1.210.1.1.2.1.1 | Columng9983PortCapFecSupported | read-only | current | FEC and Interleaver capability of the G.Bond/TDIM port. This object has a value of true(1) when the port supports the FEC and Interleaver function. A value of … |
| 1.3.6.1.2.1.210.1.1.2.1.2 | Columng9983PortCapFecMaxWordSize | read-only | current | A maximum supported FEC code word size, in octets, for G.Bond/TDIM ports supporting the FEC function. A value of zero SHALL be returned if the FEC function is … |
| 1.3.6.1.2.1.210.1.1.2.1.3 | Columng9983PortCapFecMaxRedundancySize | read-only | current | A maximum supported FEC redundancy word size, in octets, for G.Bond/TDIM ports supporting the FEC function. A value of zero SHALL be returned if the FEC functi… |
| 1.3.6.1.2.1.210.1.1.2.1.4 | Columng9983PortCapFecInterleaverTypeSupported | read-only | current | Supported Interleaver types for G.Bond/TDIM ports supporting the FEC function. Possible values are: none - the port does not support interleaving block - the p… |
| 1.3.6.1.2.1.210.1.1.2.1.5 | Columng9983PortCapFecMaxInterleaverDepth | read-only | current | A maximum Interleaver depth for G.Bond/TDIM ports supporting the FEC function. A value of zero SHALL be returned if the Interleaver is not supported. This obje… |
| 1.3.6.1.2.1.210.1.1.3 | Tableg9983PortStatTable | not-accessible | current | This table provides overall status information of G.Bond TDIM ports, complementing the generic status information from the ifTable of the IF-MIB and the gBondP… |
| 1.3.6.1.2.1.210.1.1.3.1 | Rowg9983PortStatEntry | not-accessible | current | An entry in the G.Bond/TDIM Port Status table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex. Note that a G.Bond GBS port runs on top of a si… |
| 1.3.6.1.2.1.210.1.1.3.1.1 | Columng9983PortStatFecOperState | read-only | current | A read-only value indicating the current operational state of the OPTIONAL Forward Error Correction (FEC) function for the G.998.3 port. A value of 'false' ind… |
| 1.3.6.1.2.1.210.1.1.3.1.2 | Columng9983PortStatFltStatus | read-only | current | G.Bond/TDIM port fault status. This is a bitmap of possible conditions. The various bit positions are: serviceDown - at least one of the services defined for t… |
| 1.3.6.1.2.1.210.1.1.3.1.3 | Columng9983PortStatCrc4Errors | read-only | current | The total number of CRC-4 errors (frame header errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted M times. Disconti… |
| 1.3.6.1.2.1.210.1.1.3.1.4 | Columng9983PortStatCrc6Errors | read-only | current | The total number of CRC-6 errors (super-frame errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted 1 time. Discontinu… |
| 1.3.6.1.2.1.210.1.1.3.1.5 | Columng9983PortStatCrc8Errors | read-only | current | The total number of CRC-8 errors (event/message errors) on all pairs in the G.Bond/TDIM port. Simultaneous errors on M lines SHOULD be counted M times. Discont… |
| 1.3.6.1.2.1.210.1.1.4 | Tableg9983OperSvcTable | not-accessible | current | Table of the operational services configured on a G.Bond/TDIM port. This table reflects current actual service configuration, set by the g9983PortConfAdminServ… |
| 1.3.6.1.2.1.210.1.1.4.1 | Rowg9983OperSvcEntry | not-accessible | current | An entry in the G.Bond/TDIM Port Operational Service table, containing the index of an active service entry in the g9983SvcTable. The entry is indexed by the i… |
| 1.3.6.1.2.1.210.1.1.4.1.1 | Columng9983OperSvcPosition | not-accessible | current | G.Bond/TDIM operational service position indicating relative placement of the associated service pointed to by g9983OperSvcIdx, within the G.Bond/TDIM frame. T… |
| 1.3.6.1.2.1.210.1.1.4.1.2 | Columng9983OperSvcIdx | read-only | current | G.Bond/TDIM operational service index to an existing entry in the g9983SvcTable (value of g9983SvcIdx) describing a particular service. |
| 1.3.6.1.2.1.210.1.1.4.1.3 | Columng9983OperSvcState | read-only | current | G.Bond/TDIM service operational state. Possible values are: up - Service is up and passing traffic. down - Service is down, due to a variety of reasons, e.g., … |
| 1.3.6.1.2.1.210.1.1.5 | Tableg9983SvcTable | not-accessible | current | Table of possible services for G.Bond/TDIM ports. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.2.1.210.1.1.5.1 | Rowg9983SvcEntry | not-accessible | current | An entry in the G.Bond/TDIM Port Service table, containing the management information applicable to a particular service, indexed by the g9983SvcIdx, on a G.Bo… |
| 1.3.6.1.2.1.210.1.1.5.1.1 | Columng9983SvcIdx | not-accessible | current | G.Bond/TDIM service index a particular service entry. |
| 1.3.6.1.2.1.210.1.1.5.1.2 | Columng9983SvcIfIdx | read-create | current | This is a unique index within the ifTable. It represents the interface index of a service to be transmitted over the G.Bond/TDIM service instance. This objects… |
| 1.3.6.1.2.1.210.1.1.5.1.3 | Columng9983SvcType | read-create | current | G.Bond/TDIM service type. Possible values are: ds1 - Clear Channel DS1 (synchronous) e1 - Clear Channel E1 (synchronous) nxds0 - Fractional DS1 (synchronous) n… |
| 1.3.6.1.2.1.210.1.1.5.1.4 | Columng9983SvcSize | read-create | current | Service size, in octets, per bonding sub-block for a specific service identified by g9983SvcIdx. For TDM (synchronous) services with variable size (e.g., fract… |
| 1.3.6.1.2.1.210.1.1.5.1.5 | Columng9983SvcRowStatus | read-create | current | This object controls the creation, modification, or deletion of the associated entry in the g9983SvcTable per the semantics of RowStatus. If an 'active' entry … |
| 1.3.6.1.2.1.210.1.1.6 | Nodeg9983PM | |||
| 1.3.6.1.2.1.210.1.1.6.1 | Tableg9983PortPmCurTable | not-accessible | current | This table contains current Performance Monitoring information for a G.Bond/TDIM port. This table contains live data from the equipment and as such is NOT pers… |
| 1.3.6.1.2.1.210.1.1.6.1.1 | Rowg9983PortPmCurEntry | not-accessible | current | An entry in the G.Bond/TDIM Port PM table. Each entry represents a G.Bond/TDIM port indexed by the ifIndex. |
| 1.3.6.1.2.1.210.1.1.6.1.1.1 | Columng9983PortPmCur15MinValidIntervals | read-only | current | A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute … |
| 1.3.6.1.2.1.210.1.1.6.1.1.2 | Columng9983PortPmCur15MinInvalidIntervals | read-only | current | A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the … |
| 1.3.6.1.2.1.210.1.1.6.1.1.3 | Columng9983PortPmCur15MinTimeElapsed | read-only | current | A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval. This object partially maps to the TR-159 attr… |
| 1.3.6.1.2.1.210.1.1.6.1.1.4 | Columng9983PortPmCur15MinCrc4s | read-only | current | A read-only count of CRC-4 errors (frame header errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simultan… |
| 1.3.6.1.2.1.210.1.1.6.1.1.5 | Columng9983PortPmCur15MinCrc6s | read-only | current | A read-only count of CRC-6 errors (super-frame errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simultane… |
| 1.3.6.1.2.1.210.1.1.6.1.1.6 | Columng9983PortPmCur15MinCrc8s | read-only | current | A read-only count of CRC-8 errors (event/message errors) on all active pairs in the G.Bond/TDIM port during the current 15-minute performance interval. Simulta… |
| 1.3.6.1.2.1.210.1.1.6.1.1.7 | Columng9983PortPmCur1DayValidIntervals | read-only | current | A read-only number of 1-day intervals for which data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collect… |
| 1.3.6.1.2.1.210.1.1.6.1.1.8 | Columng9983PortPmCur1DayInvalidIntervals | read-only | current | A read-only number of 1-day intervals for which data was not always available. The value will typically be zero, except in cases where the data for some interv… |
| 1.3.6.1.2.1.210.1.1.6.1.1.9 | Columng9983PortPmCur1DayTimeElapsed | read-only | current | A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval. |
| 1.3.6.1.2.1.210.1.1.6.1.1.10 | Columng9983PortPmCur1DayCrc4s | read-only | current | A read-only count of CRC-4 errors on the G.Bond/TDIM port in the current 1-day performance interval. This object is inhibited during Severely Errored Seconds (… |
| 1.3.6.1.2.1.210.1.1.6.1.1.11 | Columng9983PortPmCur1DayCrc6s | read-only | current | A read-only count of CRC-6 errors on the G.Bond/TDIM port in the current 1-day performance interval. This object is inhibited during Unavailable Seconds (UAS). |
| 1.3.6.1.2.1.210.1.1.6.1.1.12 | Columng9983PortPmCur1DayCrc8s | read-only | current | A read-only count of CRC-8 errors on the G.Bond/TDIM port in the current 1-day performance interval. This object is inhibited during Unavailable Seconds (UAS). |
| 1.3.6.1.2.1.210.1.1.6.2 | Tableg9983PortPm15MinTable | not-accessible | current | This table contains historical 15-minute buckets of Performance Monitoring information for a G.Bond/TDIM port (a row for each 15-minute interval, up to 96 inte… |
| 1.3.6.1.2.1.210.1.1.6.2.1 | Rowg9983PortPm15MinEntry | not-accessible | current | An entry in the G.Bond/TDIM Port historical 15-minute PM table. Each entry represents Performance Monitoring data for a G.Bond TDIM port, indexed by the ifInde… |
| 1.3.6.1.2.1.210.1.1.6.2.1.1 | Columng9983PortPm15MinIntervalIndex | not-accessible | current | Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object partially maps… |
| 1.3.6.1.2.1.210.1.1.6.2.1.2 | Columng9983PortPm15MinIntervalMoniTime | read-only | current | A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (900 seconds), except… |
| 1.3.6.1.2.1.210.1.1.6.2.1.3 | Columng9983PortPm15MinIntervalCrc4s | read-only | current | A read-only count of CRC-4 errors on the G.Bond/TDIM port during the 15-minute performance history interval. This object is inhibited during Severely Errored S… |
| 1.3.6.1.2.1.210.1.1.6.2.1.4 | Columng9983PortPm15MinIntervalCrc6s | read-only | current | A read-only count of CRC-6 errors on the G.Bond/TDIM port during the 15-minute performance history interval. This object is inhibited during Unavailable Second… |
| 1.3.6.1.2.1.210.1.1.6.2.1.5 | Columng9983PortPm15MinIntervalCrc8s | read-only | current | A read-only count of CRC-8 errors on the G.Bond/TDIM port during the current 15-minute performance interval. This object is inhibited during Unavailable Second… |
| 1.3.6.1.2.1.210.1.1.6.2.1.6 | Columng9983PortPm15MinIntervalValid | read-only | current | A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). … |
| 1.3.6.1.2.1.210.1.1.6.3 | Tableg9983PortPm1DayTable | not-accessible | current | This table contains historical 1-day buckets of Performance Monitoring information for a G.Bond/TDIM port (a row for each 1-day interval, up to 7 intervals). E… |
| 1.3.6.1.2.1.210.1.1.6.3.1 | Rowg9983PortPm1DayEntry | not-accessible | current | An entry in the G.Bond/TDIM Port historical 1-day PM table. Each entry represents Performance Monitoring data for such a port, indexed by the ifIndex, collecte… |
| 1.3.6.1.2.1.210.1.1.6.3.1.1 | Columng9983PortPm1DayIntervalIndex | not-accessible | current | Performance data interval number. 1 is the most recent previous interval; interval 7 is 7 days ago. Intervals 2..7 are OPTIONAL. This object partially maps to … |
| 1.3.6.1.2.1.210.1.1.6.3.1.2 | Columng9983PortPm1DayIntervalMoniTime | read-only | current | A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), exce… |
| 1.3.6.1.2.1.210.1.1.6.3.1.3 | Columng9983PortPm1DayIntervalCrc4s | read-only | current | A read-only count of CRC-4 errors on the G.Bond/TDIM port during the 1-day performance history interval. This object is inhibited during Severely Errored Secon… |
| 1.3.6.1.2.1.210.1.1.6.3.1.4 | Columng9983PortPm1DayIntervalCrc6s | read-only | current | A read-only count of CRC-6 errors on the G.Bond/TDIM port during the 1-day performance history interval. This object is inhibited during Unavailable Seconds (U… |
| 1.3.6.1.2.1.210.1.1.6.3.1.5 | Columng9983PortPm1DayIntervalCrc8s | read-only | current | A read-only count of CRC-8 errors on the G.Bond/TDIM port during the current 1-day performance interval. This object is inhibited during Unavailable Seconds (U… |
| 1.3.6.1.2.1.210.1.1.6.3.1.6 | Columng9983PortPm1DayIntervalValid | read-only | current | A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). … |
| 1.3.6.1.2.1.210.1.1.6.4 | Tableg9983SvcPmCurTable | not-accessible | current | This table contains current Performance Monitoring information for the services of a G.Bond/TDIM port. This table contains live data from the equipment and as … |
| 1.3.6.1.2.1.210.1.1.6.4.1 | Rowg9983SvcPmCurEntry | not-accessible | current | An entry in the G.Bond/TDIM Services PM table. Each entry represents a service, indexed by the g9983SvcIdx, in a G.Bond/TDIM port, indexed by the ifIndex. |
| 1.3.6.1.2.1.210.1.1.6.4.1.1 | Columng9983SvcPmCur15MinValidIntervals | read-only | current | A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute … |
| 1.3.6.1.2.1.210.1.1.6.4.1.2 | Columng9983SvcPmCur15MinInvalidIntervals | read-only | current | A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the … |
| 1.3.6.1.2.1.210.1.1.6.4.1.3 | Columng9983SvcPmCur15MinTimeElapsed | read-only | current | A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval. This object partially maps to the TR-159 attr… |
| 1.3.6.1.2.1.210.1.1.6.4.1.4 | Columng9983SvcPmCur15MinDowns | read-only | current | A read-only count of seconds in the current 15-minute performance interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcS… |
| 1.3.6.1.2.1.210.1.1.6.4.1.5 | Columng9983SvcPmCur1DayValidIntervals | read-only | current | A read-only number of 1-day performance history intervals for which the data was collected. The value of this object will be 7 or the maximum number of 1-day h… |
| 1.3.6.1.2.1.210.1.1.6.4.1.6 | Columng9983SvcPmCur1DayInvalidIntervals | read-only | current | A read-only number of 1-day performance history intervals for which the performance data was not always available. The value will typically be zero, except in … |
| 1.3.6.1.2.1.210.1.1.6.4.1.7 | Columng9983SvcPmCur1DayTimeElapsed | read-only | current | A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval. |
| 1.3.6.1.2.1.210.1.1.6.4.1.8 | Columng9983SvcPmCur1DayDowns | read-only | current | A read-only count of seconds in the current 1-day performance interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState… |
| 1.3.6.1.2.1.210.1.1.6.5 | Tableg9983SvcPm15MinTable | not-accessible | current | This table contains historical 15-minute buckets of Performance Monitoring information for the services of a G.Bond/TDIM port (a multi-dimensional row for each… |
| 1.3.6.1.2.1.210.1.1.6.5.1 | Rowg9983SvcPm15MinEntry | not-accessible | current | An entry in the G.Bond/TDIM Service historical 15-minute PM table. Each entry represents Performance Monitoring data for a particular service, indexed by the g… |
| 1.3.6.1.2.1.210.1.1.6.5.1.1 | Columng9983SvcPm15MinIntervalIndex | not-accessible | current | Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object partially maps… |
| 1.3.6.1.2.1.210.1.1.6.5.1.2 | Columng9983SvcPm15MinIntervalMoniTime | read-only | current | A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (900 seconds), except… |
| 1.3.6.1.2.1.210.1.1.6.5.1.3 | Columng9983SvcPm15MinIntervalDowns | read-only | current | A read-only count of seconds in the 15-minute performance history interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcS… |
| 1.3.6.1.2.1.210.1.1.6.5.1.4 | Columng9983SvcPm15MinIntervalValid | read-only | current | A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). … |
| 1.3.6.1.2.1.210.1.1.6.6 | Tableg9983SvcPm1DayTable | not-accessible | current | This table contains historical 1-day buckets of Performance Monitoring information for the services of a G.Bond/TDIM port (a multi-dimensional row for each 1-d… |
| 1.3.6.1.2.1.210.1.1.6.6.1 | Rowg9983SvcPm1DayEntry | not-accessible | current | An entry in the G.Bond/TDIM Service historical 1-day PM table. Each entry represents Performance Monitoring data for a particular service, indexed by the g9983… |
| 1.3.6.1.2.1.210.1.1.6.6.1.1 | Columng9983SvcPm1DayIntervalIndex | not-accessible | current | Performance data interval number. 1 is the most recent previous interval; interval 7 is 7 days ago. Intervals 2..7 are OPTIONAL. This object partially maps to … |
| 1.3.6.1.2.1.210.1.1.6.6.1.2 | Columng9983SvcPm1DayIntervalMoniTime | read-only | current | A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), exce… |
| 1.3.6.1.2.1.210.1.1.6.6.1.3 | Columng9983SvcPm1DayIntervalDowns | read-only | current | A read-only count of seconds in the 1-day performance history interval during which a particular TDIM service was 'down', as indicated by the g9983OperSvcState… |
| 1.3.6.1.2.1.210.1.1.6.6.1.4 | Columng9983SvcPm1DayIntervalValid | read-only | current | A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). … |
| 1.3.6.1.2.1.210.2 | Nodeg9983Conformance | |||
| 1.3.6.1.2.1.210.2.1 | Nodeg9983Groups | |||
| 1.3.6.1.2.1.210.2.1.1 | Groupg9983BasicGroup | current | A collection of objects representing management information for G.Bond/TDIM ports. | |
| 1.3.6.1.2.1.210.2.1.2 | Groupg9983FecGroup | current | A collection of objects supporting the OPTIONAL Forward Error Correction (FEC) and Interleaver function in G.Bond/TDIM ports. | |
| 1.3.6.1.2.1.210.2.1.3 | Groupg9983AlarmConfGroup | current | A collection of objects required for configuration of alarm thresholds and notifications in G.Bond/TDIM ports. | |
| 1.3.6.1.2.1.210.2.1.4 | Groupg9983NotificationGroup | current | This group supports notifications of significant conditions associated with G.Bond/TDIM ports. | |
| 1.3.6.1.2.1.210.2.1.5 | Groupg9983PerfCurrGroup | current | A collection of objects supporting OPTIONAL current Performance Monitoring information for G.Bond/TDIM ports. | |
| 1.3.6.1.2.1.210.2.1.6 | Groupg9983Perf15MinGroup | current | A collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond/TDIM ports, during previous 15-minute intervals. | |
| 1.3.6.1.2.1.210.2.1.7 | Groupg9983Perf1DayGroup | current | A collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond/TDIM ports, during previous 1-day intervals. | |
| 1.3.6.1.2.1.210.2.2 | Nodeg9983Compliances | |||
| 1.3.6.1.2.1.210.2.2.1 | Complianceg9983Compliance | current | The compliance statement for G.Bond/TDIM interfaces. Compliance with the following external compliance statements is REQUIRED: MIB Module Compliance Statement … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| G9983SvcIndex | Unsigned32 (1..255) | current | A unique value, greater than zero, for each service defined in the managed G.Bond/TDIM port. It is RECOMMENDED that values be assigned contiguously starting from 1. The value for each service MUST remain constant at lea… |
| G9983SvcIndexList | OCTET STRING (SIZE (0..60)) | current | This textual convention represents a continuous ordered list of all the services defined for the managed G.Bond/TDIM port. The value of this object is a concatenation of zero or more (up to 60) octets, where each octet … |
| G9983SvcOrderIndex | Unsigned32 (1..60) | current | A unique value, greater than zero, for each service defined in the managed G.Bond/TDIM port, showing its relative position inside the G.Bond/TDIM frame. |