GBNDeviceOEM-MIB
31 objects
GBN Broadcom BCM5600 StrataSwitch OEM-Product Enterprise MIB definition.
Imported Objects
| ADMIN-MASTER-MIB | gbnDevice |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.3 | Identitybcm5600 | GBN Broadcom BCM5600 StrataSwitch OEM-Product Enterprise MIB definition. | ||
| 1.3.6.1.4.1.13464.1.2.2.3.1 | NodeoemArchIface | |||
| 1.3.6.1.4.1.13464.1.2.2.3.1.1 | TableoemArchIfaceTable | not-accessible | current | A table of switch interfaces and associated properties. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1 | RowoemArchIfaceEntry | not-accessible | current | Table entry for switch interface control and status information. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.1 | ColumnoemArchIfaceUnit | read-only | current | An index that uniquely identifies a unit in the TiNet Switch stack. If an invalid value is used for the index, a SNMP 'noSuchName' error (SNMPv1) or 'noSuchIns… |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.2 | ColumnoemArchIfacePort | read-only | current | An index that uniquely identifies a GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator) within the oemArchIfaceUnit. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.3 | ColumnoemArchIfaceLLWHPort | read-only | current | A value that uniquely identifies a GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator) in the GBN BCM5600 stack. This is a 'Layered Linear With Hole… |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.4 | ColumnoemArchIfaceIfIndex | read-only | current | The ifIndex of this GBN Application 'logical port' (i.e., IEEE 802.3ad Aggregator). Note that an ifIndex value of 34603009 (0x02100001) represents the Aggregat… |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.5 | ColumnoemArchIfaceName | read-write | current | DURABLE: The textual name of this interface, e.g., 'John'. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.6 | ColumnoemArchIfaceEnable | read-write | current | DURABLE: { true:all } This object is true(1) when this interface is enabled and false(1) when it is disabled. For this product, this is the ONLY way to enable … |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.7 | ColumnoemArchIfaceSTPEnable | read-write | current | DURABLE: { true:all } This object is true(1) when Spanning Tree operation is enabled for this interface and false(2) when it is disabled. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.8 | ColumnoemArchIfaceLink | read-only | current | The state of Link Detect on this interface. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.9 | ColumnoemArchIfaceDuplexSpeedSet | read-write | current | DURABLE: { autonegotiate:all } The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99… |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.10 | ColumnoemArchIfaceDuplexSpeedGet | read-only | current | The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unkn… |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.11 | ColumnoemArchIfacePortLoop | read-write | current | The state of Link Detect on this interface. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.12 | ColumnoemArchIfaceFlowControl | read-write | current | DURABLE: { enable } Set the flow control on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.13 | ColumnoemArchIfaceTxVlanTagPkts | read-only | current | The number of VLAN tagged packets transmitted on this interface. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.14 | ColumnoemArchIfaceTxL3Pkts | read-only | current | The number of Layer 3 packets transmitted on this interface. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.15 | ColumnoemArchIfaceTxL3AbortedPkts | read-only | current | The number of Layer 3 transmit packets aborted on this interface. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.16 | ColumnoemArchIfaceRxIpInHdrErrors | read-only | current | The number of Layer 3 packets received on this interface that were discarded due to IP header errors (e.g., bad checksum, invalid versions, format errors). |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.17 | ColumnoemArchIfaceL2Tunneling | read-write | current | When l2 entities (such as STP bridges) conneted across a VPN network, l2 PDUs need delivering through VPN without being processed.To achieve this, users need e… |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.18 | ColumnoemArchIfaceLinkUpTime | read-only | current | The duration of linkup on this interface. The unit is second. |
| 1.3.6.1.4.1.13464.1.2.2.3.1.1.1.19 | ColumnoemArchIfaceMasterMode | read-write | current | The master/slave mode on this interface. |
| 1.3.6.1.4.1.13464.1.2.2.3.2 | NodeoemChip | |||
| 1.3.6.1.4.1.13464.1.2.2.3.2.1 | ScalaroemChipStub | read-write | current | This object is a place holder for the OEM Chip interface. |
| 1.3.6.1.4.1.13464.1.2.2.3.3 | NodeoemProdConformance | |||
| 1.3.6.1.4.1.13464.1.2.2.3.3.1 | NodeoemProdGroups | |||
| 1.3.6.1.4.1.13464.1.2.2.3.3.1.1 | GroupoemArchIfaceGroup | current | This group configures and retrieves Architecture interface specific objects. | |
| 1.3.6.1.4.1.13464.1.2.2.3.3.1.2 | GroupoemChipGroup | current | This group configures OEM Chip specific objects. | |
| 1.3.6.1.4.1.13464.1.2.2.3.3.2 | NodeoemProdCompliances | |||
| 1.3.6.1.4.1.13464.1.2.2.3.3.2.1 | ComplianceoemProdCompliance | current | The compliance statement. |