MIB Viewer

GBNDeviceSWAPI-MIB

206 objects
SWAPI for Switch End Driver 100Mb/s and 1000Mb/s Management.
Imported Objects
ADMIN-MASTER-MIBgbnDevice
IANAifType-MIBIANAifType
RFC1213-MIBDisplayString PhysAddress
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIBITS Counter32 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCMacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.13464.1.2.2.2IdentitybcmSwapiSWAPI for Switch End Driver 100Mb/s and 1000Mb/s Management.
1.3.6.1.4.1.13464.1.2.2.2.1NodesMIBConformance
1.3.6.1.4.1.13464.1.2.2.2.1.1NodesMIBGroups
1.3.6.1.4.1.13464.1.2.2.2.1.1.3GroupsMIBDot1dGroupcurrentSwapi dot1d support objects.
1.3.6.1.4.1.13464.1.2.2.2.1.1.4GroupsMIBRMONGroupcurrentSwapi RMON support objects.
1.3.6.1.4.1.13464.1.2.2.2.1.1.5GroupsMIBMauGroupcurrentSwapi MAU support objects.
1.3.6.1.4.1.13464.1.2.2.2.1.1.6GroupsMIBDot1pGroupcurrentSwapi Dot1p dependent support objects.
1.3.6.1.4.1.13464.1.2.2.2.1.1.7GroupsMIBDot1QGroupcurrentSwapi Dot1Q dependent support objects.
1.3.6.1.4.1.13464.1.2.2.2.1.1.8GroupsMIBDot3GroupcurrentSwapi RFC1643 dependent support objects.
1.3.6.1.4.1.13464.1.2.2.2.1.1.9GroupsMIBArchGroupcurrentSwapi architectural dependent support objects.
1.3.6.1.4.1.13464.1.2.2.2.1.2NodesMIBCompliances
1.3.6.1.4.1.13464.1.2.2.2.1.2.1CompliancesMIBCompliancecurrentThe compliance statement for s module.
1.3.6.1.4.1.13464.1.2.2.2.2NodesRFC1573MIB
1.3.6.1.4.1.13464.1.2.2.2.2.3NodesRFC1573Interfaces
1.3.6.1.4.1.13464.1.2.2.2.4NodesRFC1493MIB
1.3.6.1.4.1.13464.1.2.2.2.4.1NodesDot1dBase
1.3.6.1.4.1.13464.1.2.2.2.4.1.4TablesDot1dBasePortTablenot-accessiblecurrentA table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1RowsDot1dBasePortEntrynot-accessiblecurrentA list of information for each port of the bridge.
1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1.1ColumnsDot1dBasePortread-onlycurrentThe port number of the port for which this entry contains bridge management information.
1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1.2ColumnsDot1dBaseIfIndexread-onlycurrentThe value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.
1.3.6.1.4.1.13464.1.2.2.2.4.1.4.1.5ColumnsDot1dBasePortMtuExceededDiscardsread-onlycurrentThe number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
1.3.6.1.4.1.13464.1.2.2.2.4.2NodesDot1dStp
1.3.6.1.4.1.13464.1.2.2.2.4.2.15TablesDot1dStpPortTablenot-accessiblecurrentA table that contains port-specific information for the Spanning Tree Protocol.
1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1RowsDot1dStpPortEntrynot-accessiblecurrentA list of information maintained by every port about the Spanning Tree Protocol state for that port.
1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1.1ColumnsDot1dStpPortread-onlycurrentThe port number of the port for which this entry contains Spanning Tree Protocol management information.
1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1.2ColumnsDot1dStpPortStateread-writecurrentThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the …
1.3.6.1.4.1.13464.1.2.2.2.4.2.15.1.3ColumnsDot1dStpPortEnableread-writecurrentThe enabled/disabled status of the port.
1.3.6.1.4.1.13464.1.2.2.2.4.4NodesDot1dTp
1.3.6.1.4.1.13464.1.2.2.2.4.4.1ScalarsDot1dTpLearnedEntryDiscardsread-onlycurrentThe total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the…
1.3.6.1.4.1.13464.1.2.2.2.4.4.2ScalarsDot1dTpAgingTimeread-writecurrentThe timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.But in TiNet S2008Ei, t…
1.3.6.1.4.1.13464.1.2.2.2.4.4.3TablesDot1dTpFdbTablenot-accessiblemandatoryA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1RowsDot1dTpFdbEntrynot-accessiblemandatoryInformation about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.1ColumnsDot1dTpFdbAddressread-onlymandatoryA unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.2ColumnsDot1dTpFdbPortread-onlymandatoryEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAdd…
1.3.6.1.4.1.13464.1.2.2.2.4.4.3.1.3ColumnsDot1dTpFdbStatusread-onlymandatoryThe status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co…
1.3.6.1.4.1.13464.1.2.2.2.5NodesRFC1757MIB
1.3.6.1.4.1.13464.1.2.2.2.5.1NodesRFC1757Statistics
1.3.6.1.4.1.13464.1.2.2.2.5.1.1TablesEtherStatsTablenot-accessiblecurrentA list of Ethernet statistics entries.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1RowsEtherStatsEntrynot-accessiblecurrentA collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.1ColumnsEtherStatsIndexread-onlycurrentThe value of this object uniquely identifies this etherStats entry. Defined as a single port via the MIB-II ifIndex.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.3ColumnsEtherStatsDropEventsread-onlycurrentThe total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets …
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.4ColumnsEtherStatsOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can …
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.5ColumnsEtherStatsPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.6ColumnsEtherStatsBroadcastPktsread-onlycurrentThe total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.7ColumnsEtherStatsMulticastPktsread-onlycurrentThe total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.8ColumnsEtherStatsCRCAlignErrorsread-onlycurrentThe total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.9ColumnsEtherStatsUndersizePktsread-onlycurrentThe total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.10ColumnsEtherStatsOversizePktsread-onlycurrentThe total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.11ColumnsEtherStatsFragmentsread-onlycurrentThe total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.12ColumnsEtherStatsJabbersread-onlycurrentThe total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.13ColumnsEtherStatsCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.14ColumnsEtherStatsPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.15ColumnsEtherStatsPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS …
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.16ColumnsEtherStatsPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.17ColumnsEtherStatsPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.18ColumnsEtherStatsPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FC…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.19ColumnsEtherStatsPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including F…
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.20ColumnsEtherStatsRXMACControlFramesread-onlycurrentThe total number of MAC control frames received.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.21ColumnsEtherStatsRXPauseMACCtrlFramesread-onlycurrentThe total number of pause frames received.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.22ColumnsEtherStatsTXPauseMACCtrlFramesread-onlycurrentThe total number of pause frames transmitted.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.23ColumnsEtherStatsBcmIPMCBridgedPcktsread-onlycurrentThe total number of IPMC packets bridged.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.24ColumnsEtherStatsBcmIPMCRoutedPcktsread-onlycurrentThe total number of IPMC packets routed.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.25ColumnsEtherStatsBcmIPMCInDroppedPcktsread-onlycurrentThe total number of IPMC dropped packets for this port in the ingress.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.26ColumnsEtherStatsBcmIPMCOutDroppedPcktsread-onlycurrentThe total number of IPMC dropped packets for this port in the egress.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.27ColumnsEtherStatsIfInFrameRateread-onlycurrentThe ingress packet rate of this port.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.28ColumnsEtherStatsIfInOctetRateread-onlycurrentThe ingress octet rate of this port.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.29ColumnsEtherStatsIfOutFrameRateread-onlycurrentThe egress packet rate of this port.
1.3.6.1.4.1.13464.1.2.2.2.5.1.1.1.30ColumnsEtherStatsIfOutOctetRateread-onlycurrentThe egress octet rate of this port.
1.3.6.1.4.1.13464.1.2.2.2.6NodesRFC2239MIB
1.3.6.1.4.1.13464.1.2.2.2.6.2NodesDot3IfMauBasicGroup
1.3.6.1.4.1.13464.1.2.2.2.6.2.1TablesIfMauTablenot-accessiblecurrentTable of descriptive and status information about MAU(s) attached to an interface.
1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1RowsIfMauEntrynot-accessiblecurrentAn entry in the table, containing information about a single MAU.
1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.2ColumnsIfMauIndexread-onlycurrentThis variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same interface (sIfMauIfIndex).
1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.5ColumnsIfMauMediaAvailableread-onlycurrentIf the MAU is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link test fail state/low light function. For an AUI or a coax (in…
1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.7ColumnsIfMauJabberStateread-onlycurrentThe value other(1) is returned if the jabber state is not 2, 3, or 4. The agent must always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) i…
1.3.6.1.4.1.13464.1.2.2.2.6.2.1.1.11ColumnsIfMauDefaultTyperead-writecurrentThis object identifies the default administrative 10 or 100 Mb/s baseband MAU type, to be used in conjunction with the operational MAU type denoted by sIfMauTy…
1.3.6.1.4.1.13464.1.2.2.2.6.5NodesDot3IfMauAutoNegGroup
1.3.6.1.4.1.13464.1.2.2.2.6.5.1TablesIfMauAutoNegTablenot-accessiblecurrentConfiguration and status objects for the auto- negotiation function of MAUs attached to interfaces.
1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1RowsIfMauAutoNegEntrynot-accessiblecurrentAn entry in the table, containing configuration and status information for the auto-negotiation function of a particular MAU.
1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.1ColumnsIfMauAutoNegAdminStatusread-writecurrentSetting this object to enabled(1) will cause the interface which has the auto-negotiation signaling ability to be enabled. If the value of this object is disab…
1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.8ColumnsIfMauAutoNegRestartread-writecurrentIf the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, …
1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.10ColumnsIfMauAutoNegCapAdvertisedBitsread-writecurrentA value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in…
1.3.6.1.4.1.13464.1.2.2.2.6.5.1.1.11ColumnsIfMauAutoNegCapReceivedBitsread-onlycurrentA value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be at…
1.3.6.1.4.1.13464.1.2.2.2.7NodesDot1pMIB
1.3.6.1.4.1.13464.1.2.2.2.7.1NodesDot1dExtBase
1.3.6.1.4.1.13464.1.2.2.2.7.1.1ScalarsDot1dDeviceCapabilitiesread-onlycurrentIndicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed o…
1.3.6.1.4.1.13464.1.2.2.2.7.1.2ScalarsDot1dTrafficClassesEnabledread-writecurrentDURABLE: { true } The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level …
1.3.6.1.4.1.13464.1.2.2.2.7.1.3ScalarsDot1dGmrpStatusread-writecurrentDURABLE: { enable } The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in a…
1.3.6.1.4.1.13464.1.2.2.2.7.1.4TablesDot1dPortCapabilitiesTablenot-accessiblecurrentA table that contains capabilities information about every port that is associated with this bridge.
1.3.6.1.4.1.13464.1.2.2.2.7.1.4.1RowsDot1dPortCapabilitiesEntrynot-accessiblecurrentA set of capabilities information about this port indexed by sDot1dBasePort.
1.3.6.1.4.1.13464.1.2.2.2.7.1.4.1.1ColumnsDot1dPortCapabilitiesread-onlycurrentIndicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB.
1.3.6.1.4.1.13464.1.2.2.2.7.2NodesDot1dPriority
1.3.6.1.4.1.13464.1.2.2.2.7.2.1TablesDot1dPortPriorityTablenot-accessiblecurrentA table that contains information about every port that is associated with this transparent bridge.
1.3.6.1.4.1.13464.1.2.2.2.7.2.1.1RowsDot1dPortPriorityEntrynot-accessiblecurrentA list of Default User Priorities for each port of a transparent bridge. This is indexed by sDot1dBasePort.
1.3.6.1.4.1.13464.1.2.2.2.7.2.1.1.1ColumnsDot1dPortDefaultUserPriorityread-writecurrentDURABLE: { 0:all } The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.
1.3.6.1.4.1.13464.1.2.2.2.7.2.1.1.2ColumnsDot1dPortNumTrafficClassesread-onlycurrentThe number of egress traffic classes supported on this port. This object may optionally be read-only.
1.3.6.1.4.1.13464.1.2.2.2.7.2.2TablesDot1dUserPriorityRegenTablenot-accessiblecurrentA list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Tr…
1.3.6.1.4.1.13464.1.2.2.2.7.2.2.1RowsDot1dUserPriorityRegenEntrynot-accessiblecurrentA mapping of incoming User Priority to a Regenerated User Priority.
1.3.6.1.4.1.13464.1.2.2.2.7.2.2.1.1ColumnsDot1dUserPrioritynot-accessiblecurrentThe User Priority for a frame received on this port.
1.3.6.1.4.1.13464.1.2.2.2.7.2.2.1.2ColumnsDot1dRegenUserPriorityread-writecurrentThe Regenerated User Priority the incoming User Priority is mapped to for this port.
1.3.6.1.4.1.13464.1.2.2.2.7.2.3TablesDot1dTrafficClassTablenot-accessiblecurrentA table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(sDot1dPortNumTrafficClasses…
1.3.6.1.4.1.13464.1.2.2.2.7.2.3.1RowsDot1dTrafficClassEntrynot-accessiblecurrentUser Priority to Traffic Class mapping.
1.3.6.1.4.1.13464.1.2.2.2.7.2.3.1.1ColumnsDot1dTrafficClassPrioritynot-accessiblecurrentThe Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated …
1.3.6.1.4.1.13464.1.2.2.2.7.2.3.1.2ColumnsDot1dTrafficClassread-writecurrentDURABLE: { 0:all } The Traffic Class the received frame is mapped to.
1.3.6.1.4.1.13464.1.2.2.2.7.2.4TablesDot1dPortOutboundAccessPriorityTablenot-accessiblecurrentA table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring.
1.3.6.1.4.1.13464.1.2.2.2.7.2.4.1RowsDot1dPortOutboundAccessPriorityEntrynot-accessiblecurrentRegenerated User Priority to Outbound Access Priority mapping.
1.3.6.1.4.1.13464.1.2.2.2.7.2.4.1.1ColumnsDot1dPortOutboundAccessPriorityread-onlycurrentThe Outbound Access Priority the received frame is mapped to.
1.3.6.1.4.1.13464.1.2.2.2.7.2.5TableoemQueueWeightTablenot-accessiblecurrentA table of weight of queue .
1.3.6.1.4.1.13464.1.2.2.2.7.2.5.1RowoemQueueWeightEntrynot-accessiblecurrentTable entry of weight of queue.
1.3.6.1.4.1.13464.1.2.2.2.7.2.5.1.1ColumnoemQueuenot-accessiblecurrentQueue of class
1.3.6.1.4.1.13464.1.2.2.2.7.2.5.1.2ColumnoemQueueWeightread-writecurrentWeight of queue
1.3.6.1.4.1.13464.1.2.2.2.7.2.6TableoemDscpToCosMapTablenot-accessiblecurrentA table mapping evaluated DSCP to CoS.
1.3.6.1.4.1.13464.1.2.2.2.7.2.6.1RowoemDscpToCosMapEntrynot-accessiblecurrentDSCP to CoS mapping.
1.3.6.1.4.1.13464.1.2.2.2.7.2.6.1.1ColumnoemDscpToCosMapDscpread-onlycurrentthe DSCP value used to map to CoS.
1.3.6.1.4.1.13464.1.2.2.2.7.2.6.1.2ColumnoemDscpToCosMapCosread-writecurrentthe map result CoS.
1.3.6.1.4.1.13464.1.2.2.2.7.2.7ScalaroemDscpToCosMapStatusread-writecurrentthe DSCP to CoS map status.
1.3.6.1.4.1.13464.1.2.2.2.7.3NodesDot1dGarp
1.3.6.1.4.1.13464.1.2.2.2.7.4NodesDot1dGmrp
1.3.6.1.4.1.13464.1.2.2.2.7.4.1TablesDot1dPortGmrpTablenot-accessiblecurrentA table of GMRP control and status information about every bridge port. Augments the sDot1dBasePortTable.
1.3.6.1.4.1.13464.1.2.2.2.7.4.1.1RowsDot1dPortGmrpEntrynot-accessiblecurrentGMRP control and status information for a bridge port.
1.3.6.1.4.1.13464.1.2.2.2.7.4.1.1.1ColumnsDot1dPortGmrpStatusread-writecurrentThe administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as sDot1dGmrpSta…
1.3.6.1.4.1.13464.1.2.2.2.8NodesDot1QMIB
1.3.6.1.4.1.13464.1.2.2.2.8.1NodesDot1qBase
1.3.6.1.4.1.13464.1.2.2.2.8.1.3ScalarsDot1qMaxSupportedVlansread-onlycurrentThe maximum number of IEEE 802.1Q VLANs that this device supports.
1.3.6.1.4.1.13464.1.2.2.2.8.1.5ScalarsDot1qGvrpStatusread-writecurrentThe administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which i…
1.3.6.1.4.1.13464.1.2.2.2.8.2NodesDot1qTp
1.3.6.1.4.1.13464.1.2.2.2.8.2.1TablesDot1qFdbTablenot-accessiblecurrentA table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automa…
1.3.6.1.4.1.13464.1.2.2.2.8.2.1.1RowsDot1qFdbEntrynot-accessiblecurrentInformation about a specific Filtering Database.
1.3.6.1.4.1.13464.1.2.2.2.8.2.1.1.1ColumnsDot1qFdbIdnot-accessiblecurrentThe identity of this Filtering Database.
1.3.6.1.4.1.13464.1.2.2.2.8.2.1.1.2ColumnsDot1qFdbDynamicCountread-onlycurrentThe current number of dynamic entries in this Filtering Database.
1.3.6.1.4.1.13464.1.2.2.2.8.2.2TablesDot1qTpFdbTablenot-accessiblecurrentA table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1RowsDot1qTpFdbEntrynot-accessiblecurrentInformation about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.1ColumnsDot1qTpFdbAddressnot-accessiblecurrentA unicast MAC address for which the device has forwarding and/or filtering information.
1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.2ColumnsDot1qTpFdbPortread-onlycurrentEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAdd…
1.3.6.1.4.1.13464.1.2.2.2.8.2.2.1.3ColumnsDot1qTpFdbStatusread-onlycurrentThe status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corr…
1.3.6.1.4.1.13464.1.2.2.2.8.2.5TablesDot1qForwardUnregisteredTablenot-accessiblecurrentA table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which there is…
1.3.6.1.4.1.13464.1.2.2.2.8.2.5.1RowsDot1qForwardUnregisteredEntrynot-accessiblecurrentForwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forw…
1.3.6.1.4.1.13464.1.2.2.2.8.2.5.1.1ColumnsDot1qForwardUnregisteredPortsread-writecurrentThe complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. …
1.3.6.1.4.1.13464.1.2.2.2.8.3NodesDot1qStatic
1.3.6.1.4.1.13464.1.2.2.2.8.3.1TablesDot1qStaticUnicastTablenot-accessiblecurrentA table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management spe…
1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1RowsDot1qStaticUnicastEntrynot-accessiblecurrentFiltering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and…
1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1.1ColumnsDot1qStaticUnicastAddressnot-accessiblecurrentThe destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1.2ColumnsDot1qStaticUnicastReceivePortnot-accessiblecurrentEither the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z…
1.3.6.1.4.1.13464.1.2.2.2.8.3.1.1.3ColumnsDot1qStaticUnicastAllowedToGoToread-writecurrentThe set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of port…
1.3.6.1.4.1.13464.1.2.2.2.8.3.2TablesDot1qStaticMulticastTablenot-accessiblecurrentA table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management s…
1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1RowsDot1qStaticMulticastEntrynot-accessiblecurrentFiltering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port …
1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.1ColumnsDot1qStaticMulticastAddressnot-accessiblecurrentThe destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.2ColumnsDot1qStaticMulticastReceivePortnot-accessiblecurrentEither the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z…
1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.3ColumnsDot1qStaticMulticastStaticEgressPortsread-writecurrentThe set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of …
1.3.6.1.4.1.13464.1.2.2.2.8.3.2.1.5ColumnsDot1qStaticMulticastStatusread-writecurrentThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll…
1.3.6.1.4.1.13464.1.2.2.2.8.4NodesDot1qVlan
1.3.6.1.4.1.13464.1.2.2.2.8.4.2TablesDot1qVlanCurrentTablenot-accessiblecurrentA table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically create…
1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1RowsDot1qVlanCurrentEntrynot-accessiblecurrentInformation for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.1ColumnsDot1qVlanTimeMarknot-accessiblecurrentA TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.2ColumnsDot1qVlanIndexnot-accessiblecurrentThe VLAN-ID or other identifier refering to this VLAN.
1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.3ColumnsDot1qVlanFdbIdread-onlycurrentThe Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the sDot1qFdbTable. This value is allocated automatically by the device whene…
1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.4ColumnsDot1qVlanCurrentEgressPortsread-onlycurrentThe set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
1.3.6.1.4.1.13464.1.2.2.2.8.4.2.1.5ColumnsDot1qVlanCurrentUntaggedPortsread-onlycurrentThe set of ports which are transmitting traffic for this VLAN as untagged frames.
1.3.6.1.4.1.13464.1.2.2.2.8.4.3TablesDot1qVlanStaticTablenot-accessiblecurrentA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi…
1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1RowsDot1qVlanStaticEntrynot-accessiblecurrentStatic information for a VLAN configured into the device by (local or network) management.
1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.2ColumnsDot1qVlanStaticEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Re…
1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.4ColumnsDot1qVlanStaticUntaggedPortsread-createcurrentThe set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (sDot1qVlanIndex = 1) is…
1.3.6.1.4.1.13464.1.2.2.2.8.4.3.1.5ColumnsDot1qVlanStaticRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.13464.1.2.2.2.8.4.5TablesDot1qPortVlanTablenot-accessiblecurrentA table containing per port control and status information for VLAN configuration in the device.
1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1RowsDot1qPortVlanEntrynot-accessiblecurrentInformation controlling VLAN configuration for a port on the device. This is indexed by sDot1dBasePort.
1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.1ColumnsDot1qPvidread-writecurrentDURABLE: { 1:all } The PVID, the VLAN ID assigned to untagged frames or Prority-Tagged frames received on this port.
1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.2ColumnsDot1qPortAcceptableFrameTypesread-writecurrentDURABLE: { 1:all } When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1…
1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.3ColumnsDot1qPortIngressFilteringread-writecurrentDURABLE: { 2:all } When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the …
1.3.6.1.4.1.13464.1.2.2.2.8.4.5.1.4ColumnsDot1qPortGvrpStatusread-writecurrentThe state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this…
1.3.6.1.4.1.13464.1.2.2.2.9NodesRFC1643MIB
1.3.6.1.4.1.13464.1.2.2.2.9.1NodesRFC1643Dot3
1.3.6.1.4.1.13464.1.2.2.2.9.1.2TablesDot3StatsTablenot-accessiblecurrentStatistics for a collection of ethernet-like interfaces attached to a particular system.
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1RowsDot3StatsEntrynot-accessiblecurrentStatistics for a particular interface to an ethernet-like medium.
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.1ColumnsDot3StatsIndexread-onlycurrentAn index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.2ColumnsDot3StatsAlignmentErrorsread-onlycurrentA count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.3ColumnsDot3StatsFCSErrorsread-onlycurrentA count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.4ColumnsDot3StatsSingleCollisionFramesread-onlycurrentA count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.5ColumnsDot3StatsMultipleCollisionFramesread-onlycurrentA count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.6ColumnsDot3StatsSQETestErrorsread-onlycurrentA count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section …
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.7ColumnsDot3StatsDeferredTransmissionsread-onlycurrentA count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.8ColumnsDot3StatsLateCollisionsread-onlycurrentThe number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve …
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.9ColumnsDot3StatsExcessiveCollisionsread-onlycurrentA count of frames for which transmission on a particular interface fails due to excessive collisions.
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.10ColumnsDot3StatsInternalMacTransmitErrorsread-onlycurrentA count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.11ColumnsDot3StatsCarrierSenseErrorsread-onlycurrentThe number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.13ColumnsDot3StatsFrameTooLongsread-onlycurrentA count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.16ColumnsDot3StatsInternalMacReceiveErrorsread-onlycurrentA count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of …
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.17ColumnsDot3StatsEtherChipSetread-onlycurrentThis object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of sever…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.18ColumnsDot3StatsSymbolErrorsread-onlycurrentFor an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in ha…
1.3.6.1.4.1.13464.1.2.2.2.9.1.2.1.19ColumnsDot3StatsDuplexStatusread-onlycurrentThe current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mod…
1.3.6.1.4.1.13464.1.2.2.2.10NodesDot1XMIB
1.3.6.1.4.1.13464.1.2.2.2.10.1NodesDot1xBase
1.3.6.1.4.1.13464.1.2.2.2.10.1.1ScalarsDot1xStatusread-writecurrent802.1x status
1.3.6.1.4.1.13464.1.2.2.2.4096NodesArch
1.3.6.1.4.1.13464.1.2.2.2.4096.1NodesArchSwitchInfo
1.3.6.1.4.1.13464.1.2.2.2.4096.2NodesSwitchStatsInfo
1.3.6.1.4.1.13464.1.2.2.2.4096.2.1TablesSwitchStatsTablenot-accessiblecurrentA list of interface entries. The number of entries is given by the value of ifNumber.
1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1RowsSwitchStatsEntrynot-accessiblecurrentAn interface entry containing objects at the subnetwork layer and below for a particular interface.
1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.1ColumnsSwitchPortIndexread-onlycurrentA unique value, uses linear port number with holes.
1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.2ColumnsSwitchStatsTXOctetsNoErrread-onlycurrentThe number of octets transmitted from the interface. This number does not include octets in error.
1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.3ColumnsSwitchStatsTXPacketsNoErrread-onlycurrentThe number of packets transmitted from the interface. This number does not include packets in error.
1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.4ColumnsSwitchStatsRXOctetsNoErrread-onlycurrentThe number of octets received on the interface. This number does not include octets in error.
1.3.6.1.4.1.13464.1.2.2.2.4096.2.1.1.5ColumnsSwitchStatsRXPacketsNoErrread-onlycurrentThe number of packets received on the interface. This number does not include packets in error.
Type Definitions
NameSyntaxStatusDescription
EnabledStatusINTEGER { enabled(1), disabled(2) }currentA simple status value for the object.
PortListOCTET STRINGcurrentEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…
TimeFilterTimeTickscurrent
VlanIndexUnsigned32currentA value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan…
MIB Viewer