GBNDeviceSwitch-MIB
230 objects
ADMIN Common Enterprise MIB definition.
Imported Objects
| ADMIN-MASTER-MIB | gbnDevice |
| Q-BRIDGE-MIB | dot1qStaticMulticastEntry PortList VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.2.2.1 | IdentitygbnDeviceSwitch | ADMIN Common Enterprise MIB definition. | ||
| 1.3.6.1.4.1.13464.1.2.2.1.1 | NodegbnDeviceSwitchMirror | |||
| 1.3.6.1.4.1.13464.1.2.2.1.1.1 | ScalarmirroringPort | read-write | current | This port which all packets send to. |
| 1.3.6.1.4.1.13464.1.2.2.1.1.2 | ScalarmirroredEgrPort | read-write | current | The egress ports which need to monitor. |
| 1.3.6.1.4.1.13464.1.2.2.1.1.3 | ScalarmirroredIgrPort | read-write | current | The ingress ports which need to monitor. |
| 1.3.6.1.4.1.13464.1.2.2.1.1.4 | ScalaringressMirrorMac | read-write | current | The MAC address which will be compared with the ingress frame, Only the matched frame will be mirrored |
| 1.3.6.1.4.1.13464.1.2.2.1.1.5 | ScalaregressMirrorMac | read-write | current | The MAC address which will be compared with the egress frame, Only the matched frame will be mirrored |
| 1.3.6.1.4.1.13464.1.2.2.1.1.6 | ScalaringressMirrorMacType | read-write | current | The destination or source MAC address which will be compared with the ingress frame |
| 1.3.6.1.4.1.13464.1.2.2.1.1.7 | ScalaregressMirrorMacType | read-write | current | The destination or source MAC address which will be compared with the egress frame |
| 1.3.6.1.4.1.13464.1.2.2.1.1.8 | ScalaringressMirrorDivider | read-write | current | the mirror sampling divider |
| 1.3.6.1.4.1.13464.1.2.2.1.1.9 | ScalaregressMirrorDivider | read-write | current | the mirror sampling divider |
| 1.3.6.1.4.1.13464.1.2.2.1.2 | NodegbnDeviceSwitchPort | |||
| 1.3.6.1.4.1.13464.1.2.2.1.2.1 | TableportTypeTable | not-accessible | current | A table of switch interfaces and associated properties. |
| 1.3.6.1.4.1.13464.1.2.2.1.2.1.1 | RowportTypeEntry | not-accessible | current | Table entry for switch interface control and status information. |
| 1.3.6.1.4.1.13464.1.2.2.1.2.1.1.1 | ColumnportNumber | read-only | current | the index of port. |
| 1.3.6.1.4.1.13464.1.2.2.1.2.1.1.2 | ColumnportType | read-only | current | |
| 1.3.6.1.4.1.13464.1.2.2.1.3 | NodegbnDeviceSwitchAggregation | |||
| 1.3.6.1.4.1.13464.1.2.2.1.3.1 | TableaggTable | not-accessible | obsolete | A table that contains information about every Aggregator that is associated with this System. |
| 1.3.6.1.4.1.13464.1.2.2.1.3.1.1 | RowaggEntry | not-accessible | obsolete | A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator. |
| 1.3.6.1.4.1.13464.1.2.2.1.3.1.1.1 | ColumnaggUnit | read-only | obsolete | The Interface Unit of the Aggregation. |
| 1.3.6.1.4.1.13464.1.2.2.1.3.1.1.2 | ColumnaggPort | read-only | obsolete | The MasterPort of the Aggregation. |
| 1.3.6.1.4.1.13464.1.2.2.1.3.1.1.3 | ColumnaggPortListPorts | read-write | obsolete | The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation. |
| 1.3.6.1.4.1.13464.1.2.2.1.3.1.1.4 | ColumnaggRule | read-write | obsolete | The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits … |
| 1.3.6.1.4.1.13464.1.2.2.1.3.1.1.5 | ColumnaggRowstatus | read-write | obsolete | rowstatus of trunk. |
| 1.3.6.1.4.1.13464.1.2.2.1.4 | NodegbnDeviceSwitchL3 | |||
| 1.3.6.1.4.1.13464.1.2.2.1.4.1 | Tablel3Table | not-accessible | current | �˱�Ϊ����оƬ��L3�������ݡ� |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1 | Rowl3Entry | not-accessible | current | ����оƬ��L3����˱�Ϊֻ���� |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1.1 | Columnl3IpAddress | read-only | current | Ŀ��IP��ַ����Ϊ������ |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1.2 | Columnl3NextHopMacAddress | read-only | current | ��һ��IP��MAC��ַ�� |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1.3 | Columnl3Vlan | read-only | current | ��һ��IP���ڵ�VLAN�� |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1.4 | Columnl3Port | read-only | current | ���ĵij��˿ڡ� |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1.5 | Columnl3VPTag | read-only | current | ���ĵ�VPTag�� |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1.6 | Columnl3CreateTime | read-only | current | Create Time,such as 2004-07-29,13:30:15.0 |
| 1.3.6.1.4.1.13464.1.2.2.1.4.1.1.7 | Columnl3UpdateTime | read-only | current | Update Time,such as 2004-07-29,13:30:15.0 |
| 1.3.6.1.4.1.13464.1.2.2.1.5 | NodegbnDeviceSwitchLoopTest | |||
| 1.3.6.1.4.1.13464.1.2.2.1.5.1 | ScalarloopTestPortno | read-write | current | port bitmap:Numbers of the port to be tested. The highest bit is port 1, the second bit is port 2, and so on. |
| 1.3.6.1.4.1.13464.1.2.2.1.5.2 | ScalarloopTestType | read-write | current | DURABLE: { 4 } Setting this object to 2-4 enables loop back test. Setting it to 1 disables loop back test. |
| 1.3.6.1.4.1.13464.1.2.2.1.5.3 | ScalarloopTestSuccess | read-only | current | if the highest bit is 0:the port 1 loop fail, 1,the port 1 loop success, and so on. |
| 1.3.6.1.4.1.13464.1.2.2.1.6 | NodegbnDeviceSwitchSRM | |||
| 1.3.6.1.4.1.13464.1.2.2.1.6.1 | ScalarsrmHardwareEnable | read-write | current | Add network routes to hardware table or not.Default is enable. |
| 1.3.6.1.4.1.13464.1.2.2.1.6.2 | ScalarsrmHardwareDEFCPU | read-write | current | The DEF routes goes to CPU. |
| 1.3.6.1.4.1.13464.1.2.2.1.7 | NodegbnDeviceSwitchFlowAlarm | |||
| 1.3.6.1.4.1.13464.1.2.2.1.7.1 | TableportFlowAlarmTable | not-accessible | current | A Table of port flow alarm. |
| 1.3.6.1.4.1.13464.1.2.2.1.7.1.1 | RowportFlowAlarmEntry | not-accessible | current | A list of port flow alarm. |
| 1.3.6.1.4.1.13464.1.2.2.1.7.1.1.1 | ColumnportFlowAlarmPort | read-only | current | The port number. |
| 1.3.6.1.4.1.13464.1.2.2.1.7.1.1.2 | ColumnportFlowAlarmEnable | read-write | current | The enable status of the port flow alarm |
| 1.3.6.1.4.1.13464.1.2.2.1.7.1.1.3 | ColumnportFlowAlarmExceedStatus | read-only | current | The exceed status of the port flow alarm |
| 1.3.6.1.4.1.13464.1.2.2.1.7.1.1.4 | ColumnportFlowAlarmExceedThreshold | read-write | current | The exceed threshold of port flow alarm. |
| 1.3.6.1.4.1.13464.1.2.2.1.7.1.1.5 | ColumnportFlowAlarmNormalThreshold | read-write | current | The normal threshold of port flow alarm. |
| 1.3.6.1.4.1.13464.1.2.2.1.7.2 | ScalarportFlowAlarmGlobalEnable | read-write | current | The global enable status of port flow alarm. |
| 1.3.6.1.4.1.13464.1.2.2.1.7.5 | NodeportFlowAlarmTrap | |||
| 1.3.6.1.4.1.13464.1.2.2.1.7.5.1 | NotificationportFlowAlarmExceedTrap | current | Port ingress packet rate become too big, port flow exceed alarm happen. | |
| 1.3.6.1.4.1.13464.1.2.2.1.7.5.2 | NotificationportFlowAlarmNormalTrap | current | Port ingress packet rate become normal, port flow normal alarm happen. | |
| 1.3.6.1.4.1.13464.1.2.2.1.8 | NodegbnDeviceSwitchQueneScheduer | |||
| 1.3.6.1.4.1.13464.1.2.2.1.8.1 | NodeqosQueueSchedulerGroup | |||
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.1 | ScalarqosWrrQueue1Weight | read-write | current | Weight of 1th queue(%). for 3650, the range is 1 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.2 | ScalarqosWrrQueue2Weight | read-write | current | Weight of 2th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.3 | ScalarqosWrrQueue3Weight | read-write | current | Weight of 3th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.4 | ScalarqosWrrQueue4Weight | read-write | current | Weight of 4th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.5 | ScalarqosWrrMaxDelayValue | read-write | current | the maximum allowable latency for packet transmission on the priorest COS |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.6 | ScalarqosQueueSchedulerMode | read-write | current | queue scheduler mode: strict priority, weighted round robin, strict priority+weighted round robin |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.7 | ScalarqosWrrQueue5Weight | read-write | current | Weight of 5th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.8 | ScalarqosWrrQueue6Weight | read-write | current | Weight of 6th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.9 | ScalarqosWrrQueue7Weight | read-write | current | Weight of 7th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.8.1.10 | ScalarqosWrrQueue8Weight | read-write | current | Weight of 8th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15. |
| 1.3.6.1.4.1.13464.1.2.2.1.9 | NodegbnDeviceSwitchLineRate | |||
| 1.3.6.1.4.1.13464.1.2.2.1.9.1 | TableqosLineRateTable | not-accessible | current | A list of line-rate QOS entries. |
| 1.3.6.1.4.1.13464.1.2.2.1.9.1.1 | RowqosLineRateEntry | not-accessible | current | A list of line-rate QOS entries. |
| 1.3.6.1.4.1.13464.1.2.2.1.9.1.1.1 | ColumnqosLineRateInterface | read-only | current | the line rate interface. |
| 1.3.6.1.4.1.13464.1.2.2.1.9.1.1.2 | ColumnqosLineRateTargetRate | read-write | current | The target rate(Kbps) of the line-rate QOS. Must be a multiple of 64Kbps |
| 1.3.6.1.4.1.13464.1.2.2.1.9.1.1.3 | ColumnqosLineRateTargetBurst | read-write | current | The target burst(Kbps) of the line-rate QOS. Must be a multiple of 64Kbps |
| 1.3.6.1.4.1.13464.1.2.2.1.9.1.1.4 | ColumnqosLineRateTargetRateIngress | read-write | current | The ingress target rate(Kbps) of the line-rate QOS.0 means disable |
| 1.3.6.1.4.1.13464.1.2.2.1.10 | NodegbnDeviceSwitchPortIsolation | |||
| 1.3.6.1.4.1.13464.1.2.2.1.10.1 | NodeportIsolationGroup | |||
| 1.3.6.1.4.1.13464.1.2.2.1.10.1.1 | ScalarportIsolationDownLinkPorts | read-write | current | port isolation down link portlist |
| 1.3.6.1.4.1.13464.1.2.2.1.10.1.2 | TableportIsolationUpLinkTable | not-accessible | current | A list of uplink-ports of portisolation entries. conflict with portIsolationDownLinkPorts. |
| 1.3.6.1.4.1.13464.1.2.2.1.10.1.2.1 | RowportIsolationUpLinkEntry | not-accessible | current | A list of uplink-ports of portisolation entries. |
| 1.3.6.1.4.1.13464.1.2.2.1.10.1.2.1.1 | ColumnportisolationInterface | read-only | current | port index, start from 1. |
| 1.3.6.1.4.1.13464.1.2.2.1.10.1.2.1.2 | ColumnportisolationUplinkList | read-write | current | portlist of uplink ports,when configured , a port can only communicate with it's uplink ports. |
| 1.3.6.1.4.1.13464.1.2.2.1.11 | NodegbnDeviceSwitchStormControl | |||
| 1.3.6.1.4.1.13464.1.2.2.1.11.1 | TablestormControlTable | not-accessible | current | A list of storm control entries. |
| 1.3.6.1.4.1.13464.1.2.2.1.11.1.1 | RowstormControlEntry | not-accessible | current | A list of storm control entries. |
| 1.3.6.1.4.1.13464.1.2.2.1.11.1.1.1 | ColumnstormControlInterface | read-only | current | the storm control interface. |
| 1.3.6.1.4.1.13464.1.2.2.1.11.1.1.2 | ColumnstormControlType | read-only | current | the pack flow type of the storm control. |
| 1.3.6.1.4.1.13464.1.2.2.1.11.1.1.3 | ColumnstormControlTargetRate | read-write | current | the target rate of the storm control. |
| 1.3.6.1.4.1.13464.1.2.2.1.11.1.1.4 | ColumnstormControlRowStatus | read-write | current | row status of the storm control |
| 1.3.6.1.4.1.13464.1.2.2.1.11.1.1.5 | ColumnstormControlMode | read-write | current | the mode of the storm control. |
| 1.3.6.1.4.1.13464.1.2.2.1.12 | NodegbnDeviceSwitchAntiDos | |||
| 1.3.6.1.4.1.13464.1.2.2.1.12.1 | Scalaripfragmnetnumber | read-write | current | The ip fragment number. |
| 1.3.6.1.4.1.13464.1.2.2.1.12.2 | ScalaripTTL | read-write | current | Control IP with TTL=0 packet,default is not traffic to the CPU. |
| 1.3.6.1.4.1.13464.1.2.2.1.13 | NodegbnDeviceSwitchBandWidth | |||
| 1.3.6.1.4.1.13464.1.2.2.1.13.1 | TablebandwidthcontrolTable | not-accessible | current | A table of switch interfaces and associated properties. |
| 1.3.6.1.4.1.13464.1.2.2.1.13.1.1 | RowbandwidthcontrolEntry | not-accessible | current | Table entry for switch interface control and status information. |
| 1.3.6.1.4.1.13464.1.2.2.1.13.1.1.1 | ColumncontrolPort | not-accessible | current | the index of port. |
| 1.3.6.1.4.1.13464.1.2.2.1.13.1.1.2 | ColumnportEgressBandwidthcontrol | read-write | current | Egress Speed Value of port, bandwidth control . |
| 1.3.6.1.4.1.13464.1.2.2.1.13.1.1.3 | ColumnportIngressBandwidthcontrol | read-write | current | Ingress Speed Value of port, bandwidth control . |
| 1.3.6.1.4.1.13464.1.2.2.1.14 | NodegbnDeviceSwitchHigigStatistics | |||
| 1.3.6.1.4.1.13464.1.2.2.1.14.1 | TablehigigStatisticsTable | not-accessible | current | A table of Higig Statistics Info. |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1 | RowhigigStatisticsEntry | not-accessible | current | Table entry for Higig Statistics information. |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.1 | Columnunit | not-accessible | current | unit number. |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.2 | Columnhigig | not-accessible | current | higig number. |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.3 | ColumnsnEtherStatsPkts64Octets | read-only | current | The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.4 | ColumnsnEtherStatsPkts65to127Octets | read-only | current | The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.5 | ColumnsnEtherStatsPkts128to255Octets | read-only | current | The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.6 | ColumnsnEtherStatsPkts256to511Octets | read-only | current | The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.7 | ColumnsnEtherStatsPkts512to1023Octets | read-only | current | The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.8 | ColumnsnEtherStatsPkts1024to1518Octets | read-only | current | The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.9 | Columnsndot1dTpPortInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.10 | ColumnsnifInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.11 | ColumnsnifInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.12 | ColumnsnifInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.13 | ColumnsnifInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.14 | ColumnsnifInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in t… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.15 | ColumnsnifInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.16 | ColumnsnDot3StatsFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.17 | ColumnsnDot3StatsSymbolErrors | read-only | current | For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in ha… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.18 | ColumnsnDot3StatsCarrierSenseErrors | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.19 | ColumnsnEtherStatsUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.20 | ColumnsnEtherStatsOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.21 | ColumnsnEtherStatsFragments | read-only | current | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.22 | ColumnsnEtherStatsJabbers | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.23 | Columnsndot1dTpPortOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.24 | ColumnsnifOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.25 | ColumnsnifOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.26 | ColumnsnifOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.27 | ColumnsnifOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.28 | ColumnsnifOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.29 | ColumnsnifOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.30 | ColumnsnDot3StatsDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.31 | ColumnsnEtherStatsCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3… |
| 1.3.6.1.4.1.13464.1.2.2.1.14.1.1.32 | ColumnsnDot3StatsLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.4.1.13464.1.2.2.1.15 | NodegbnDeviceSwitchChannelStats | |||
| 1.3.6.1.4.1.13464.1.2.2.1.15.1 | TablechannelStatsTable | not-accessible | current | A table of Channel group Statistics Info(32). |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1 | RowchannelStatsEntry | not-accessible | current | Table entry for Channel Statistics information(32). |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.1 | ColumnchannelGroupIndex | read-only | current | The configed channel-group index list. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.2 | ColumnchannelInOctetRate | read-only | current | The ingress octet rate of this channel-group. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.3 | ColumnchannelInFrameRate | read-only | current | The ingress packet rate of this channel-group. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.4 | ColumnchannelOutOctetRate | read-only | current | The egress octet rate of this channel-group. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.5 | ColumnchannelOutFrameRate | read-only | current | The egress packet rate of this channel-group. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.6 | ColumnchannelPkts64Octets | read-only | current | The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets) in this channel-gr… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.7 | ColumnchannelPkts65to127Octets | read-only | current | The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.8 | ColumnchannelPkts128to255Octets | read-only | current | The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.9 | ColumnchannelPkts256to511Octets | read-only | current | The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.10 | ColumnchannelPkts512to1023Octets | read-only | current | The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.11 | ColumnchannelPkts1024to1518Octets | read-only | current | The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.12 | ColumnchannelInFrames | read-only | mandatory | The number of frames that have been received by this channel-group from its segment. Note that a frame received on the interface corresponding to this channel-… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.13 | ColumnchannelInOctets | read-only | current | The total number of octets received on the channel-group, including framing characters. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.14 | ColumnchannelInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.15 | ColumnchannelInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.16 | ColumnchannelInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.17 | ColumnchannelInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in t… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.18 | ColumnchannelInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.19 | ColumnchannelFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.20 | ColumnchannelSymbolErrors | read-only | current | For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in ha… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.21 | ColumnchannelCarrierSenseErrors | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.22 | ColumnchannelUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.23 | ColumnchannelOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.24 | ColumnchannelFragments | read-only | current | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.25 | ColumnchannelJabbers | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.26 | ColumnchannelOutFrames | read-only | mandatory | The number of frames that have been transmitted by this channel-group to its segment. Note that a frame transmitted on the interface corresponding to this port… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.27 | ColumnchannelOutOctets | read-only | current | The total number of octets transmitted out of the channel-group, including framing characters. Discontinuities in the value of this counter can occur at re-ini… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.28 | ColumnchannelOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.29 | ColumnchannelOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.30 | ColumnchannelOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.31 | ColumnchannelOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.32 | ColumnchannelOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.33 | ColumnchannelDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.34 | ColumnchannelCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.1.1.35 | ColumnchannelLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2 | TablechannelStatsXTable | not-accessible | current | A table of Channel group Statistics Info(64). |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1 | RowchannelStatsXEntry | not-accessible | current | Table entry for Channel Statistics information(64). |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.1 | ColumnchannelHCInFrames | read-only | current | The number of frames that have been received by this channel-group from its segment. Note that a frame received on the interface corresponding to this channel-… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.2 | ColumnchannelHCInOctets | read-only | current | The total number of octets received on the channel-group, including framing characters. This object is a 64-bit version of channelInOctets. Discontinuities in … |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.3 | ColumnchannelHCInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.4 | ColumnchannelHCInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.5 | ColumnchannelHCInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.6 | ColumnchannelHCInDiscards | read-only | current | Count of valid frames that have been received by this channel-group from its segment which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.7 | ColumnchannelHCOutFrames | read-only | current | The number of frames that have been transmitted by this channel-group to its segment. Note that a frame transmitted on the interface corresponding to this chan… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.8 | ColumnchannelHCOutOctets | read-only | current | The total number of octets transmitted out of the channel-group, including framing characters. This object is a 64-bit version of channelOutOctets. Discontinui… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.9 | ColumnchannelHCOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.10 | ColumnchannelHCOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.13464.1.2.2.1.15.2.1.11 | ColumnchannelHCOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.13464.1.2.2.1.16 | NodegbnDeviceSwitchRmoteMirror | |||
| 1.3.6.1.4.1.13464.1.2.2.1.16.1 | TableremoteMirrorVlanTable | not-accessible | current | A table of switch interfaces and associated properties. |
| 1.3.6.1.4.1.13464.1.2.2.1.16.1.1 | RowremoteMirrorVlanEntry | not-accessible | current | Table entry for switch interface control and status information. |
| 1.3.6.1.4.1.13464.1.2.2.1.16.1.1.1 | ColumnremoteMirrorVlanIndex | read-only | current | the index of remote mirror vlan. |
| 1.3.6.1.4.1.13464.1.2.2.1.16.1.1.2 | ColumnremoteMirrorVlanEnable | read-write | current | 1:enable. 2 disable |
| 1.3.6.1.4.1.13464.1.2.2.1.16.2 | ScalarremoteMirrorRspanVlanSet | read-write | current | set rspan vlan on src-switch, 0:means no rspan vlan;don't set vlan 1 to be rspan vlan |
| 1.3.6.1.4.1.13464.1.2.2.1.16.3 | ScalarremoteMirrorEnable | read-write | current | enable remote mirror on src-switch |
| 1.3.6.1.4.1.13464.1.2.2.1.17 | NodegbnDeviceSwitchPortSFPInfo | |||
| 1.3.6.1.4.1.13464.1.2.2.1.17.1 | TableportSFPInfoTable | not-accessible | current | A table of switch interfaces and associated properties. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1 | RowportSFPInfoEntry | not-accessible | current | Table entry for switch interface control and status information. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.1 | ColumnportSFPNumber | read-only | current | The index of port. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.2 | ColumntransceiverType | read-only | current | Transceiver type |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.3 | Columncompliance | read-only | current | Compliance type |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.4 | ColumnconnectorType | read-only | current | Connector type |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.5 | ColumnwaveLength | read-only | current | Wave length. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.6 | ColumntransferDistance | read-only | current | Transfer distance. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.7 | ColumndigitalDiagnosticMonitor | read-only | current | Digital Diagnostic Monitor. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.8 | ColumnvendorName | read-only | current | Vendor Name. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.9 | ColumnmanuSerialNumber | read-only | current | Manufacture Serial Number. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.10 | ColumnmanufacturingDate | read-only | current | Manufacturing Date. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.11 | Columntemperature | read-only | current | Temperature of sfp. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.12 | Columnvoltage | read-only | current | Voltage of sfp. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.13 | ColumnbiasCurrent | read-only | current | bias Current. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.14 | ColumnbiasHighThreshold | read-only | current | bias Current High Threshold. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.15 | ColumnbiasLowThreshold | read-only | current | bias Current Low Threshold. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.16 | ColumnrxPower | read-only | current | RX Power. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.17 | ColumnrxPowerHighThreshold | read-only | current | RX Power High Threshold. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.18 | ColumnrxPowerLowThreshold | read-only | current | RX Power Low Threshold. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.19 | ColumntxPower | read-only | current | TX Power. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.20 | ColumntxPowerHighThreshold | read-only | current | TX Power High Threshold. |
| 1.3.6.1.4.1.13464.1.2.2.1.17.1.1.21 | ColumntxPowerLowThreshold | read-only | current | TX Power Low Threshold. |
| 1.3.6.1.4.1.13464.1.2.2.1.18 | NodegbnDeviceSwitchPortAvgRate | |||
| 1.3.6.1.4.1.13464.1.2.2.1.18.1 | ScalarportRateStatisticsInterval | read-write | current | port average rate statistics time interval, unit is minute, default is 5 minutes. |
| 1.3.6.1.4.1.13464.1.2.2.1.18.2 | TableportAvgRateTable | not-accessible | current | A table of port average rate statistics info(32). |
| 1.3.6.1.4.1.13464.1.2.2.1.18.2.1 | RowportAvgRateEntry | not-accessible | current | Table entry for port average rate statistics information(32). |
| 1.3.6.1.4.1.13464.1.2.2.1.18.2.1.1 | ColumnportIndex | read-only | current | The port index list. |
| 1.3.6.1.4.1.13464.1.2.2.1.18.2.1.2 | ColumnportInOctetRate | read-only | current | The ingress octet rate of this port. |
| 1.3.6.1.4.1.13464.1.2.2.1.18.2.1.3 | ColumnportInFrameRate | read-only | current | The ingress packet rate of this port. |
| 1.3.6.1.4.1.13464.1.2.2.1.18.2.1.4 | ColumnportOutOctetRate | read-only | current | The egress octet rate of this port. |
| 1.3.6.1.4.1.13464.1.2.2.1.18.2.1.5 | ColumnportOutFrameRate | read-only | current | The egress packet rate of this port. |
| 1.3.6.1.4.1.13464.1.2.2.1.19 | NodegbnDeviceSwitchPortbandwidthUtilization | |||
| 1.3.6.1.4.1.13464.1.2.2.1.19.1 | ScalarportBandwidthUtilizationEnable | read-write | current | The port bandwidth switch. |
| 1.3.6.1.4.1.13464.1.2.2.1.19.2 | TableportBandwidthUtilizationTable | not-accessible | current | A table of port bandwidth utilization info(32). |
| 1.3.6.1.4.1.13464.1.2.2.1.19.2.2 | RowportBandwidthUtilizationEntry | not-accessible | current | Table entry for port bandwidth utilization information(32). |
| 1.3.6.1.4.1.13464.1.2.2.1.19.2.2.1 | ColumnportBandIndex | read-only | current | The port index list. |
| 1.3.6.1.4.1.13464.1.2.2.1.19.2.2.2 | ColumnportInBandwidthUtilization | read-only | current | The ingress bandwidth utilization of this port. |
| 1.3.6.1.4.1.13464.1.2.2.1.19.2.2.3 | ColumnportOutBandwidthUtilization | read-only | current | The egress bandwidth utilization of this port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MirrorMacType | INTEGER { null(0), destination (1), source(2) } | current | null��destination��source |