GBNL2Switch-MIB
114 objects
Gbn Common Enterprise MIB definition.
Imported Objects
| ADMIN-MASTER-MIB | gbnL2 |
| Q-BRIDGE-MIB | dot1qStaticMulticastEntry PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.2.4.1 | IdentitygbnL2Switch | Gbn Common Enterprise MIB definition. | ||
| 1.3.6.1.4.1.13464.1.2.4.1.1 | NodegbnL2SwitchPacket | |||
| 1.3.6.1.4.1.13464.1.2.4.1.1.1 | ScalarbroadcastSuppress | read-write | current | Rate limit Value, the maximum number of packets per second the switch should allow to receive . |
| 1.3.6.1.4.1.13464.1.2.4.1.1.2 | ScalardlfForward | read-write | current | Control the flooding of dlf packets. |
| 1.3.6.1.4.1.13464.1.2.4.1.1.3 | TabledlfForwardPortTable | not-accessible | current | A table of dlf packets port control. |
| 1.3.6.1.4.1.13464.1.2.4.1.1.3.1 | RowdlfForwardPortEntry | not-accessible | current | Table entry for dlf packets control. |
| 1.3.6.1.4.1.13464.1.2.4.1.1.3.1.1 | ColumndlfForwardPort | read-only | current | The port number in dlf packets table Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.1.3.1.2 | ColumndlfForwardStatus | read-write | current | The dlf packets flag Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.2 | NodegbnL2SwitchMac | |||
| 1.3.6.1.4.1.13464.1.2.4.1.2.1 | TablemacAddressTable | not-accessible | current | A table of mac address . |
| 1.3.6.1.4.1.13464.1.2.4.1.2.1.1 | RowmacAddressEntry | not-accessible | current | Table entry for mac address . |
| 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.1 | ColumnmacAddressMac | read-only | current | The MAC address in arl table Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.2 | ColumnmacAddressVID | read-only | current | The vlan ID in arl table Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.3 | ColumnmacAddressPort | read-only | current | The port number in arl table Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.4 | ColumnmacAddressStatus | read-write | current | |
| 1.3.6.1.4.1.13464.1.2.4.1.2.1.1.5 | ColumnmacAddressStatic | read-only | current | The Static MAC address in arl table Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.2 | TablemacLearningPortTable | not-accessible | current | A table of mac address learning port control. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.2.1 | RowmacLearningPortEntry | not-accessible | current | Table entry for mac address learning control. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.1 | ColumnmacAddressLearningPort | read-only | current | The port number in mac address learning table Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.2 | ColumnmacAddressLearningStatus | read-write | current | The mac address learning flag Item. |
| 1.3.6.1.4.1.13464.1.2.4.1.2.2.1.3 | ColumnmacAddressMaxCount | read-write | current | the max mac address number of port.In some products, when macAddressLearningPort is 0, macAddressMaxCount is 0 means mac-control-learnig, others means auto-lea… |
| 1.3.6.1.4.1.13464.1.2.4.1.2.3 | ScalarmacAddressLearnCount | read-only | current | The total number of mac-address entries including learnt or configured. |
| 1.3.6.1.4.1.13464.1.2.4.1.3 | NodegbnL2SwitchMulticast | |||
| 1.3.6.1.4.1.13464.1.2.4.1.3.1 | ScalarigmpSnoopEnabled | read-write | current | DURABLE: { false } Setting this object to true(1) enables IGMP Snooping. Setting it to false(2) disables IGMP Snooping. Note that IGMP Snooping can function wi… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.2 | ScalarigmpSnoopAlerts | read-write | current | DURABLE: { false } Setting this object to true(1) enables the IP Router Alert Option (as defined in RFC2113) for transmitted IGMP packets. Setting it to false(… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.3 | ScalarigmpSnoopAging | read-write | current | DURABLE: { 300 } The timeout period in seconds for aging out Multicast Groups dynamically learned with IGMP Snooping. Note that aging operates on a per interfa… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.4 | TableigmpSnoopTable | not-accessible | current | This table, which provides IGMP Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). |
| 1.3.6.1.4.1.13464.1.2.4.1.3.4.1 | RowigmpSnoopEntry | not-accessible | current | Displays by VLAN, Multicast Group, and Multicast receive port the set of ports enabled to forward Multicast Group traffic as determined by the IGMP Snooping ta… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.4.1.1 | ColumnigmpSnoopEgressPorts | read-only | current | This read-only object displays the set of ports enabled to forward specific Multicast Group traffic as determined by the IGMP Snooping task. It should be noted… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.5 | ScalarigmpSnoopDefaultGroupPolicy | read-write | current | The default group learning policy when a group address is not found in IGMP Snooping white-list and black-list |
| 1.3.6.1.4.1.13464.1.2.4.1.3.6 | ScalarigmpSnoopMaxResponseTime | read-write | current | The timeout period in seconds waited before determinating whether a group port should be deleted or not after received a leave packet |
| 1.3.6.1.4.1.13464.1.2.4.1.3.7 | TableigmpSnoopPortTable | not-accessible | current | Used to config IGMP Snooping port options,such as group-limit and fast-leave. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.7.1 | RowigmpSnoopPortEntry | not-accessible | current | Entries of igmpSnoopPortTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.1 | ColumnigmpSnoopPort | read-only | current | Index that uniquely identifies a Ap port within igmpSnoopPortTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.2 | ColumnigmpSnoopPortFastLeave | read-write | current | The fast-leave option of a IGMP Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.3 | ColumnigmpSnoopPortGroupLimit | read-write | current | The max number of Multicast groups a port can learn. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.7.1.4 | ColumnigmpSnoopPortMcastVlan | read-write | current | Specify a multicast vlan for a port.IGMP report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the repor… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.8 | TableigmpSnoopGroupTable | not-accessible | current | This table is used to config IGMP Snooping white-list and black-list. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.8.1 | RowigmpSnoopGroupEntry | not-accessible | current | Entries of igmpSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.1 | ColumnigmpSnoopGroupAddress | not-accessible | current | An index that uniquely identifies a multicast mac-address within igmpSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.2 | ColumnigmpSnoopGroupPort | not-accessible | current | An index that uniquely identifies a Ap port within igmpSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.3 | ColumnigmpSnoopGroupVLAN | not-accessible | current | An index that uniquely identifies a VLAN ID within igmpSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.8.1.4 | ColumnigmpSnoopGroupPolicy | read-write | current | This entry is used to config IGMP Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by igm… |
| 1.3.6.1.4.1.13464.1.2.4.1.3.9 | ScalarcrossVlanMulticastEnabled | read-write | current | Setting this object to true(1) enables cross-vlan multicast. Setting it to false(2) disables cross-vlan multicast. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.10 | TablecrossVlanMulticastTable | not-accessible | current | Used to config port info of cross-vlan multicast,such as tag/untag and vlanid of tag. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.10.1 | RowcrossVlanMulticastEntry | not-accessible | current | Entries of crossVlanMulticastPortTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.1 | ColumncrossVlanPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.2 | ColumncrossVlanPortTag | read-write | current | Setting this object to true(1) of tag. Setting it to false(2) of untag. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.10.1.3 | ColumncrossVlanPortVid | read-write | current | The vlanid of tag port. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.11 | ScalarigmpSnoopRoutePortForward | read-write | current | If the status is enabled, the route port can be added into the group automatically when an igmp snooping group is created . If the status is disabled, it will … |
| 1.3.6.1.4.1.13464.1.2.4.1.3.12 | TableigmpSnoopProfileTable | not-accessible | current | This table is used to config IGMP Snooping white-list and black-list. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.12.1 | RowigmpSnoopProfileEntry | not-accessible | current | Entries of igmpSnoopProfileTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.1 | ColumnprofileId | read-only | current | An index that uniquely identifies a profile within igmpSnoopProfileTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.2 | ColumnprofileDescription | read-write | current | This entry is used to config profile description. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.3 | ColumnprofileLimit | read-write | current | This entry is used to config group learning policy in the profile. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.4 | ColumnprofilePortList | read-write | current | This entry is used to config ports to reference the profile. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.12.1.5 | ColumnprofileRowStatus | read-write | current | This entry is used to create or delete a profile within igmpSnoopProfileTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.13 | TableigmpSnoopProfileIpRangeTable | not-accessible | current | This table is used to config ip ranges within profiles listed in igmpSnoopProfileTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.13.1 | RowigmpSnoopProfileIpRangeEntry | not-accessible | current | Entries of igmpSnoopProfileIpRangeTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.1 | ColumnipRangeStartIp | read-only | current | An index that uniquely identifies a start ip address. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.2 | ColumnipRangeEndIp | read-only | current | An index that uniquely identifies an end ip address. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.3 | ColumnipRangeVlanId | read-only | current | An index that uniquely identifies a vlan. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.13.1.4 | ColumnipRangeRowStatus | read-write | current | This entry is used to create or delete an ip range within igmpSnoopProfileIpRangeTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.14 | TableigmpSnoopProfileMacRangeTable | not-accessible | current | This table is used to config mac ranges within profiles listed in igmpSnoopProfileTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.14.1 | RowigmpSnoopProfileMacRangeEntry | not-accessible | current | Entries of igmpSnoopProfileMacRangeTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.1 | ColumnmacRangeStartMac | read-only | current | An index that uniquely identifies a start mac address. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.2 | ColumnmacRangeEndMac | read-only | current | An index that uniquely identifies an end mac address. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.3 | ColumnmacRangeVlanId | read-only | current | An index that uniquely identifies a vlan. |
| 1.3.6.1.4.1.13464.1.2.4.1.3.14.1.4 | ColumnmacRangeRowStatus | read-write | current | This entry is used to create or delete a mac range within igmpSnoopProfileMacRangeTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.4 | NodegbnL2SwitchVLAN | |||
| 1.3.6.1.4.1.13464.1.2.4.1.4.1 | TableportModeTable | not-accessible | current | A Table of port mode. |
| 1.3.6.1.4.1.13464.1.2.4.1.4.1.1 | RowportModeEntry | not-accessible | current | A list of portmode parameters. |
| 1.3.6.1.4.1.13464.1.2.4.1.4.1.1.1 | ColumnportNumber | read-only | current | port number'. |
| 1.3.6.1.4.1.13464.1.2.4.1.4.1.1.2 | ColumnportMode | read-write | current | type of mode |
| 1.3.6.1.4.1.13464.1.2.4.1.5 | NodegbnL2SwitchLacpGroup | |||
| 1.3.6.1.4.1.13464.1.2.4.1.5.1 | ScalarchannelGroupCreate | read-write | current | Create a channel group . |
| 1.3.6.1.4.1.13464.1.2.4.1.5.2 | ScalarchannelGroupDelete | read-write | current | Delete a channel group. Make sure there is no member in this group . |
| 1.3.6.1.4.1.13464.1.2.4.1.5.3 | TablechannelGroupTable | not-accessible | current | A table that contains information about every Lacp channel group that is associated with this System. This table is supported in products:TiNet S3750,TiNet S35… |
| 1.3.6.1.4.1.13464.1.2.4.1.5.3.1 | RowchannelGroupEntry | not-accessible | current | A list of the Lacp channel group parameters. This is indexed by the group index. |
| 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.1 | ColumnchannelGroupIndex | read-only | current | The Index of the Lacp Channel group. |
| 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.2 | ColumnchannelGroupPortList | read-write | current | The complete set of ports currently associated with this Group. Each bit set in this list represents an Actor Port member of this Group. |
| 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.3 | ColumnchannelGroupRule | read-write | mandatory | The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits … |
| 1.3.6.1.4.1.13464.1.2.4.1.5.3.1.4 | ColumnchannelGroupRowstatus | read-write | current | rowstatus of channel group. |
| 1.3.6.1.4.1.13464.1.2.4.1.6 | NodegbnL2SwitchLacpPort | |||
| 1.3.6.1.4.1.13464.1.2.4.1.6.1 | TablelacpPortModeTable | not-accessible | current | A table that contains information about every Lacp channel group that is associated with this System. This table is supported in products:TiNet S3750,TiNet S35… |
| 1.3.6.1.4.1.13464.1.2.4.1.6.1.1 | RowlacpPortModeEntry | not-accessible | current | The port mode of lacp. This is indexed by the port number. |
| 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.1 | ColumnlacpPortIndex | read-only | current | The Index of the lacp port. |
| 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.2 | ColumnlacpPortMode | read-write | current | The mode of the Lacp Channel group.Static:link aggregation is static configguration,and lacp protocol do not run. Active:the port in this mode can send lacp pd… |
| 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.3 | ColumnlacpPortRowstatus | read-only | current | rowstatus of lacp port. |
| 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.4 | ColumnlacpPortGroupIndex | read-only | current | channel group index of port. |
| 1.3.6.1.4.1.13464.1.2.4.1.6.1.1.5 | ColumnlacpPortState | read-only | current | lacp selected state of channel group member: down(1) means the port is link down member of channel group. nobndl(2) means the port is unselected member of chan… |
| 1.3.6.1.4.1.13464.1.2.4.1.6.2 | NotificationlacpPortStateChangeTrap | current | A trap is sent to the management entity when the lacp selected state of channel group member is changed. | |
| 1.3.6.1.4.1.13464.1.2.4.1.7 | NodegbnL2SwitchMLD | |||
| 1.3.6.1.4.1.13464.1.2.4.1.7.1 | ScalarmldSnoopEnabled | read-write | current | DURABLE: { false } Setting this object to true(1) enables MLD Snooping. Setting it to false(2) disables MLD Snooping. Note that MLD Snooping can function with … |
| 1.3.6.1.4.1.13464.1.2.4.1.7.2 | ScalarmldSnoopAlerts | read-write | current | DURABLE: { false } Setting this object to true(1) enables the IP Router Alert Option (as defined in RFC2113) for transmitted MLD packets. Setting it to false(2… |
| 1.3.6.1.4.1.13464.1.2.4.1.7.3 | ScalarmldSnoopAging | read-write | current | DURABLE: { 300 } The timeout period in seconds for aging out MLD Groups dynamically learned with MLD Snooping. Note that aging operates on a per interface per … |
| 1.3.6.1.4.1.13464.1.2.4.1.7.4 | TablemldSnoopTable | not-accessible | current | This table, which provides MLD Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). |
| 1.3.6.1.4.1.13464.1.2.4.1.7.4.1 | RowmldSnoopEntry | not-accessible | current | Displays by VLAN, MLD Group, and MLD receive port the set of ports enabled to forward MLD Group traffic as determined by the MLD Snooping task. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.4.1.1 | ColumnmldSnoopEgressPorts | read-only | current | This read-only object displays the set of ports enabled to forward specific MLD Group traffic as determined by the MLD Snooping task. It should be noted that t… |
| 1.3.6.1.4.1.13464.1.2.4.1.7.5 | ScalarmldSnoopDefaultGroupPolicy | read-write | current | The default group learning policy when a group address is not found in MLD Snooping white-list and black-list |
| 1.3.6.1.4.1.13464.1.2.4.1.7.6 | ScalarmldSnoopMaxResponseTime | read-write | current | The timeout period in seconds waited before determinating whether a group port should be deleted or not after received a leave packet |
| 1.3.6.1.4.1.13464.1.2.4.1.7.7 | TablemldSnoopPortTable | not-accessible | current | Used to config MLD Snooping port options,such as group-limit and fast-leave. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.7.1 | RowmldSnoopPortEntry | not-accessible | current | Entries of mldSnoopPortTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.1 | ColumnmldSnoopPort | read-only | current | Index that uniquely identifies a Ap port within mldSnoopPortTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.2 | ColumnmldSnoopPortFastLeave | read-write | current | The fast-leave option of a MLD Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be … |
| 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.3 | ColumnmldSnoopPortGroupLimit | read-write | current | The max number of MLD groups a port can learn. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.7.1.4 | ColumnmldSnoopPortMcastVlan | read-write | current | Specify a multicast vlan for a port.MLD report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the report… |
| 1.3.6.1.4.1.13464.1.2.4.1.7.8 | TablemldSnoopGroupTable | not-accessible | current | This table is used to config MLD Snooping white-list and black-list. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.8.1 | RowmldSnoopGroupEntry | not-accessible | current | Entries of mldSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.1 | ColumnmldSnoopGroupAddress | not-accessible | current | An index that uniquely identifies a multicast mac-address within mldSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.2 | ColumnmldSnoopGroupPort | not-accessible | current | An index that uniquely identifies a Ap port within mldSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.3 | ColumnmldSnoopGroupVLAN | not-accessible | current | An index that uniquely identifies a VLAN ID within mldSnoopGroupTable. |
| 1.3.6.1.4.1.13464.1.2.4.1.7.8.1.4 | ColumnmldSnoopGroupPolicy | read-write | current | This entry is used to config MLD Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by mldS… |
| 1.3.6.1.4.1.13464.1.2.4.1.7.9 | ScalarmldSnoopRoutePortForward | read-write | current | If the status is enabled, the route port can be added into the group automatically when an mld snooping group is created . If the status is disabled, it will b… |