GBNPlatformOAM-MIB
159 objects
ADMIN Common Enterprise MIB definition.
Imported Objects
| ADMIN-MASTER-MIB | gbnPlatform |
| Q-BRIDGE-MIB | dot1qStaticMulticastEntry PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.2.1.1 | IdentitygbnPlatformOAM | ADMIN Common Enterprise MIB definition. | ||
| 1.3.6.1.4.1.13464.1.2.1.1.1 | NodegbnPlatformOAMSysIf | |||
| 1.3.6.1.4.1.13464.1.2.1.1.1.1 | ScalarsysIfMACAddr | read-write | current | DURABLE: { '000000000000'H } The base (i.e., first) MAC address used by the gbn agent for its in-band ports. |
| 1.3.6.1.4.1.13464.1.2.1.1.1.2 | ScalarsysIfIpAddress | read-write | current | DURABLE: { '00000000'H } The IP Address for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'. |
| 1.3.6.1.4.1.13464.1.2.1.1.1.3 | ScalarsysIfIPGateAddress | read-write | current | DURABLE: { '00000000'H } The default Gateway Address (i.e., next hop router) for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'. |
| 1.3.6.1.4.1.13464.1.2.1.1.1.4 | ScalarsysIfIPNetMask | read-write | current | DURABLE: { 'ffffff00'H } The IP NetMask for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'. |
| 1.3.6.1.4.1.13464.1.2.1.1.1.5 | ScalarsysIfIPStatus | read-write | current | This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the gbnCommonIP MIB objects. This allows the user … |
| 1.3.6.1.4.1.13464.1.2.1.1.1.7 | ScalarsysIfBOOTPOnOff | read-write | current | DURABLE: { disable } Enable/Disable BOOTP operation for the gbn agent. When 'disable(2)', no BOOTPs are transmitted by the Application. When 'enable(1)', the A… |
| 1.3.6.1.4.1.13464.1.2.1.1.1.8 | ScalarsysIfDHCPOnOff | read-write | current | DURABLE: { disable } Enable/Disable DHCP operation for the gbn agent. When 'disable(2)', no DHCPs are transmitted by the Application. When enabled, the Applica… |
| 1.3.6.1.4.1.13464.1.2.1.1.1.9 | TablesysIfManageVLANTbale | not-accessible | mandatory | ManageVlan table |
| 1.3.6.1.4.1.13464.1.2.1.1.1.9.1 | RowsysIfManageVLANEntry | not-accessible | mandatory | ManageVlan entry |
| 1.3.6.1.4.1.13464.1.2.1.1.1.9.1.1 | ColumnsysIfManageVLANVid | read-only | current | ManageVLAN-ID, as an index, the maximum number is 26. |
| 1.3.6.1.4.1.13464.1.2.1.1.1.9.1.2 | ColumnsysIfManageVLANRowStatus | read-write | current | ManageVLAN status |
| 1.3.6.1.4.1.13464.1.2.1.1.2 | NodegbnPlatformOAMSystem | |||
| 1.3.6.1.4.1.13464.1.2.1.1.2.1 | ScalarsoftwarePlate | read-only | current | Software platform used by switches. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.2 | ScalarsoftwareVersion | read-only | current | Software version, the format is V100R001B02D06P03SP3 |
| 1.3.6.1.4.1.13464.1.2.1.1.2.3 | ScalarsoftwareCompiledTimeE | read-only | current | Software Compiled time displayed in English, the format is Feburary 17 2003 15:47:00 |
| 1.3.6.1.4.1.13464.1.2.1.1.2.4 | ScalarsoftwareCompiledTimeC | read-only | current | Software Compiled time displayed in Chinese, the format is 2003nian06yue18ri13dian15fen |
| 1.3.6.1.4.1.13464.1.2.1.1.2.5 | ScalarcpuDescription | read-only | current | System CPU description, the format is Mips 32334, 133MHz |
| 1.3.6.1.4.1.13464.1.2.1.1.2.6 | ScalarsdramDescription | read-only | current | System Memery description, the format is 32M |
| 1.3.6.1.4.1.13464.1.2.1.1.2.7 | ScalarflashDescription | read-only | current | System Flash description, the format is 4096k |
| 1.3.6.1.4.1.13464.1.2.1.1.2.8 | ScalarhardwareVersion | read-only | current | Hardware version, the format is V3.0 |
| 1.3.6.1.4.1.13464.1.2.1.1.2.9 | ScalarbootromVersion | read-only | current | Bootrom version, the format is V2.0 |
| 1.3.6.1.4.1.13464.1.2.1.1.2.10 | ScalarhostName | read-write | current | System host name |
| 1.3.6.1.4.1.13464.1.2.1.1.2.11 | ScalarcpuIdle | read-only | current | The percentage of free CPU in the current system. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.12 | ScalarmemorySize | read-only | current | The current system memory size, unit is byte. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.13 | ScalarmemoryIdle | read-only | current | The current system free memory size, unit is byte. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.14 | NodesystemClock | |||
| 1.3.6.1.4.1.13464.1.2.1.1.2.14.1 | ScalarclockTime | read-write | current | The current calendar time in seconds. The based time is 1979/1/1. Year of the date must be the number between 2000 and 2099 |
| 1.3.6.1.4.1.13464.1.2.1.1.2.14.2 | ScalartimeZoneName | read-write | current | the timezone name,1-32 letters.eg CCT(China Coast, USSR Zone 7) |
| 1.3.6.1.4.1.13464.1.2.1.1.2.14.3 | ScalartimeZoneOffset | read-write | current | seconds between current timezone and GMT |
| 1.3.6.1.4.1.13464.1.2.1.1.2.14.4 | ScalaroffsetNegFlag | read-write | current | earlier or latter than GMT,it is true when timeZoneOffset is negative |
| 1.3.6.1.4.1.13464.1.2.1.1.2.15 | ScalarproductName | read-write | current | DURABLE: { 'WindRiver gbn Agent' } The product name associated with this agent. This name is displayed on the console screens and Web pages. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.16 | ScalarsystemReset | read-write | current | Physically performs a hardware reset of the unit. Use with care. A 'reset(2)' resets the unit, a 'resetToDefaults(3)' resets the NVM configuration to factory d… |
| 1.3.6.1.4.1.13464.1.2.1.1.2.17 | ScalarwriteConfig | read-write | current | When set to 'save(2)', config file is saved to NVM (Nonvolatile Memory). NVM save operations may be slow (e.g., erasing/writing Flash device). Consequently, al… |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18 | NodesaveNMInterfaceConfig | |||
| 1.3.6.1.4.1.13464.1.2.1.1.2.18.1 | ScalarnmInterfaceId | read-write | current | interface id of vlan saved for nm_interface configuration. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18.2 | ScalarnmInterfaceIpAddress | read-write | current | ip address saved for nm_interface configuration. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18.3 | ScalarnmInterfaceNetMask | read-write | current | mask saved for nm_interface configuration. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18.4 | ScalarnmInterfaceGateAddress | read-write | current | gateway address saved for nm_interface configuration. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18.5 | ScalarwriteNMInterfaceConifig | read-write | current | We save the nm_interface configuration through setting this Mib. When setting to 'saveNmconfig(1)', nm_interface configuration is starting to be saved. At the … |
| 1.3.6.1.4.1.13464.1.2.1.1.2.18.6 | ScalarwriteNMInterfaceConifigStatus | read-only | current | Reserve the status of process in saving Nmconfig. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.19 | ScalarprodSerialNo | read-only | current | Product Serial Number |
| 1.3.6.1.4.1.13464.1.2.1.1.2.20 | ScalarcpuBusyStatus | read-only | current | CPU busy status |
| 1.3.6.1.4.1.13464.1.2.1.1.2.21 | ScalarcpuBusyAlarmEnable | read-write | current | the enable status of cpu busy alarm. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.22 | ScalarcpuBusyThreshold | read-write | current | CPU busy threshold. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.23 | ScalarcpuUnbusyThreshold | read-write | current | CPU unbusy threshold. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.24 | NodecpuStatusTrap | |||
| 1.3.6.1.4.1.13464.1.2.1.1.2.24.1 | NotificationcpuBusyTrap | current | cpu busy trap. | |
| 1.3.6.1.4.1.13464.1.2.1.1.2.24.2 | NotificationcpuUnbusyTrap | current | cpu unbusy trap. | |
| 1.3.6.1.4.1.13464.1.2.1.1.2.25 | ScalardramAlarmEnable | read-write | current | the enable status of dram alarm. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.26 | ScalardramAlarmThreshold | read-write | current | the DRAM set alarm threshold. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.27 | ScalardramStatus | read-only | current | DRAM Status��Beyond the threshold��. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.28 | ScalardramUtilization | read-only | current | DRAM Utilization. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.29 | NodedramStatusTrap | |||
| 1.3.6.1.4.1.13464.1.2.1.1.2.29.1 | NotificationdramBusyTrap | current | dram trap. | |
| 1.3.6.1.4.1.13464.1.2.1.1.2.30 | ScalarcopyRunSta | read-write | current | copy running-config startup-config. |
| 1.3.6.1.4.1.13464.1.2.1.1.2.31 | ScalarcopyStaRun | read-write | current | copy startup-config running-config. |
| 1.3.6.1.4.1.13464.1.2.1.1.3 | NodegbnPlatformOAMIpAccessControl | |||
| 1.3.6.1.4.1.13464.1.2.1.1.3.1 | TableipAccessControlTable | not-accessible | current | IP address access control table. |
| 1.3.6.1.4.1.13464.1.2.1.1.3.1.1 | RowipAccessControlEntry | not-accessible | current | IP address access control entry. |
| 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.1 | ColumncontrolIpAddress | read-only | current | The accessible ip address of the switch |
| 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.2 | ColumncontrolIpMask | read-only | current | The accessible ip address mask of the switch, wildcard supports mask and unmask |
| 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.3 | ColumncontrolTeminal | read-only | current | The client type connected to switch, snmp(1) means connecting switch by SNMP, web(2) means connecting switch by WEB, telnet(3) means connecting switch by telne… |
| 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.4 | ColumncontrolStatus | read-write | current | IP address control status, active(1) means adding the ip address to list, destroy(2) means deleting the ip address from list |
| 1.3.6.1.4.1.13464.1.2.1.1.4 | NodegbnPlatformOAMWatchDog | |||
| 1.3.6.1.4.1.13464.1.2.1.1.4.1 | ScalarsoftDogProxy | read-write | current | Enable/disable the soft dog. |
| 1.3.6.1.4.1.13464.1.2.1.1.5 | NodegbnPlatformOAMMuser | |||
| 1.3.6.1.4.1.13464.1.2.1.1.5.1 | TablemusrTable | not-accessible | current | A Table of usr_name and Password. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.1.1 | RowmusrEntry | not-accessible | current | A list of usr parameters. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.1 | ColumnmusrIndex | not-accessible | current | A simple index into 'gbnCommonUsrTable'. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.2 | ColumnmusrName | read-write | current | A simple usrname of gbnCommonUsrEntry. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.3 | ColumnmusrPassword | read-write | current | A simple password of gbnCommonUsrEntry. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.4 | ColumnmusrType | read-write | current | DURABLE: { NormalUser } A simple UsrType into 'gbnCommonUsrTable'. when 'NomalUser' configuration is limitted |
| 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.5 | ColumnmusrRowStatus | read-write | current | DURABLE: { disable } A simple RowStatus into 'gbnCommonUsrTable'. when 'disable' the user is deleted |
| 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.6 | ColumnmusrPwdEncrypt | read-write | current | DURABLE: { 0 } Password in 'gbnCommonUsrTable' is in format of clear text(0) or enrypt(7). |
| 1.3.6.1.4.1.13464.1.2.1.1.5.2 | ScalarmanageUserAuthenType | read-write | current | Authentication method��1:local, 2:radius, 3:radius first��and then local after failed,4:tacacsplus,5:tacacsplus first, and then local after failed. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.3 | ScalarmanageUserAuthenRadiusName | read-write | current | radius server name. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.4 | ScalarmanageUserAuthChallegeType | read-write | current | Radius authentication method��1:CHAP, 2:PAP. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.5 | ScalarmanageUserTacacsAuthor | read-write | current | authorization afer authenticastion. |
| 1.3.6.1.4.1.13464.1.2.1.1.5.6 | ScalarmanageUserTacacsAccount | read-write | current | accounting after authorization. |
| 1.3.6.1.4.1.13464.1.2.1.1.6 | NodegbnPlatformOAMUpDownLoad | |||
| 1.3.6.1.4.1.13464.1.2.1.1.6.1 | ScalarloadTftpAddress | read-write | current | DURABLE: The IP Address for the TFTP server used for downloading and/or uploading files. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.2 | ScalarloadTftpFileName | read-write | current | DURABLE: The TFTP file path and name. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.3 | ScalarloadType | read-write | current | DURABLE: { application } The type of file to download or upload upon an 'gbnCommonLoadExecute'. application:program file of the switch configuration:configurat… |
| 1.3.6.1.4.1.13464.1.2.1.1.6.4 | ScalarloadExecute | read-write | current | Execute file download or upload procedure. A SET of this object starts the load procedure. Note that the Application and Boot images can only be downloaded. Th… |
| 1.3.6.1.4.1.13464.1.2.1.1.6.5 | ScalarloadExecuteStatus | read-only | current | Provides status on the execute file load progress. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.6 | ScalarloadFtpAddress | read-write | current | DURABLE: The IP Address for the FTP server used for downloading and/or uploading files. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.7 | ScalarloadFtpFileName | read-write | current | DURABLE: The FTP file path and name. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.8 | ScalarloadFtpUserName | read-write | current | DURABLE: The FTP user name. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.9 | ScalarloadFtpUserPassword | read-write | current | DURABLE: The FTP user password. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.10 | ScalarFtpdOnOff | read-write | current | DURABLE: { disable } Enable/Disable Ftpd. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.11 | ScalarFtpdAnonymousOnOff | read-write | current | DURABLE: { disable } Enable/Disable Ftpd anonymous login. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.12 | ScalarloadSlotID | read-write | current | Slot ID |
| 1.3.6.1.4.1.13464.1.2.1.1.6.13 | TableloadHistoryTable | not-accessible | current | A table of load history table. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.13.1 | RowloadHistoryEntry | not-accessible | current | A list of load history parameters. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.13.1.1 | ColumnloadHistoryIndex | not-accessible | current | A simple index into 'loadHistoryTable'. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.13.1.2 | ColumnloadHistoryFile | read-only | current | Load history file name. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.13.1.3 | ColumnloadHistoryTime | read-only | current | Time of load history file. |
| 1.3.6.1.4.1.13464.1.2.1.1.6.13.1.4 | ColumnloadHistoryStatus | read-only | current | Status of load history file. |
| 1.3.6.1.4.1.13464.1.2.1.1.7 | NodegbnPlatformOAMSnmp | |||
| 1.3.6.1.4.1.13464.1.2.1.1.7.1 | TablesnmpCommunityToViewTable | not-accessible | current | A table of SNMPv1/v2c community string to view name mappings. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.1.1 | RowsnmpCommunityToViewEntry | not-accessible | current | A list of community-to-view parameters. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.1 | ColumnsnmpComm2ViewIndex | not-accessible | current | A simple index into 'gbnCommonCommunityToViewTable'. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.2 | ColumnsnmpComm2ViewCommName | read-create | current | DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a va… |
| 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.3 | ColumnsnmpComm2ViewViewName | read-create | current | DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyViewName' in the 'vacmViewTree… |
| 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.4 | ColumnsnmpComm2ViewPermission | read-create | current | DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite… |
| 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.5 | ColumnsnmpComm2ViewRowStatus | read-create | current | DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - su… |
| 1.3.6.1.4.1.13464.1.2.1.1.7.2 | TablesnmpNotifyTypeTable | not-accessible | current | A table of SNMPv1/v2c notify type . |
| 1.3.6.1.4.1.13464.1.2.1.1.7.2.1 | RowsnmpNotifyTypeEntry | not-accessible | current | A list of notify type parameters. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.2.1.1 | ColumnsnmpPrivateNotifyType | read-only | current | notify type. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.2.1.2 | ColumnsnmpNotifyTypeStatus | read-write | current | It signifies if the traps with corresponding notify-type can be sent. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.3 | NodegbnPlatformOAMSnmpNotifyType | |||
| 1.3.6.1.4.1.13464.1.2.1.1.7.3.1 | NotificationsnmpNotifyTypeSaveConfiguration | current | A private type for traps or informs. It signifies that the SNMPv2 entity have just saved the configuration. | |
| 1.3.6.1.4.1.13464.1.2.1.1.7.4 | ScalarsnmpTrapSource | read-write | current | The id of vlan or supervlan which interface traps or informs are sent from belongs to. vlan id: 0-4094; supervlan id: 0-11. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.5 | TablesnmpRemoteEngineTable | not-accessible | current | A table of remote engine . |
| 1.3.6.1.4.1.13464.1.2.1.1.7.5.1 | RowsnmpRemoteEngineEntry | not-accessible | current | A list of remote engine. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.1 | ColumnsnmpRemoteEngineID | not-accessible | current | The remote engine's id.Note that the engine id can only appear once in the table. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.2 | ColumnsnmpRemoteHostTAddr | read-write | current | The ip and port number of remote host.Note that the value including ip and port number can only appear once in the table. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.3 | ColumnsnmpDeleteRemoteEngineTableRow | read-write | current | You can delete a row by setting the value to 'deleteRow(1)'. |
| 1.3.6.1.4.1.13464.1.2.1.1.7.6 | ScalarsnmpTrapSourceType | read-write | current | The type of the interface which traps or informs are sent from. 1: vlan interface; 2: supervlan interface. |
| 1.3.6.1.4.1.13464.1.2.1.1.8 | NodegbnPlatformOAMSntpClient | |||
| 1.3.6.1.4.1.13464.1.2.1.1.9 | NodegbnPlatformOAMSyslog | |||
| 1.3.6.1.4.1.13464.1.2.1.1.10 | NodegbnPlatformOAMPortCar | |||
| 1.3.6.1.4.1.13464.1.2.1.1.10.1 | TableportCarTable | not-accessible | current | A Table of port CAR. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.1.1 | RowportCarEntry | not-accessible | current | A list of port CAR. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.1 | ColumnportCarPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.2 | ColumnportCarEnable | read-write | current | The enable status of the port CAR |
| 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.3 | ColumnportDiscardBpdu | read-write | current | The enable status of the port discard BPDU |
| 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.4 | ColumnportCarRateBpdu | read-write | current | The port CAR max packet receive rate. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.2 | ScalarportCarGlobalEnable | read-write | current | The global enable status of port CAR. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.3 | ScalarportCarOpenTime | read-write | current | The closed port Re-open time. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.4 | ScalardiscardBpdu | read-write | current | discard specific BPDU, bit 0 for STP packet, bit 1 for GVRP packet, bit 2 for GMRP packet. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.5 | ScalarportCarRate | read-write | current | The global port CAR max packet receive rate. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.6 | ScalarcpuCarRate | read-write | current | The CPU CAR max packet receive rate. value 0 is default 400/4000 pps |
| 1.3.6.1.4.1.13464.1.2.1.1.10.7 | TablecpuLimitTable | not-accessible | current | A Table of cpu limit. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.7.1 | RowcpuLimitEntry | not-accessible | current | A list of cpu limit. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.7.1.1 | ColumncpuLimitType | read-only | current | The cpu limit type. |
| 1.3.6.1.4.1.13464.1.2.1.1.10.7.1.2 | ColumncpuLimitSpeed | read-write | current | The CPU limit packet receive rate. value 0 is default pps |
| 1.3.6.1.4.1.13464.1.2.1.1.11 | NodegbnPlatformOAMSsh | |||
| 1.3.6.1.4.1.13464.1.2.1.1.12 | NodegbnPlatformOAMMailalarm | |||
| 1.3.6.1.4.1.13464.1.2.1.1.13 | NodegbnPlatformOAMVctRun | |||
| 1.3.6.1.4.1.13464.1.2.1.1.13.1 | TablevctRunTable | not-accessible | current | A Table of VCT run. |
| 1.3.6.1.4.1.13464.1.2.1.1.13.1.1 | RowvctRunEntry | not-accessible | current | A list of VCT run. |
| 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.1 | ColumnvctRunPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.2 | ColumnvctRunEnable | read-write | current | The enable status of the VCT run |
| 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.3 | ColumnvctAutoRunEnable | read-write | current | The enable status of the VCT auto run |
| 1.3.6.1.4.1.13464.1.2.1.1.13.2 | ScalarvctAutoRunGlobalEnable | read-write | current | The global enable status of VCT auto run. |
| 1.3.6.1.4.1.13464.1.2.1.1.13.3 | ScalarvctRunGlobalEnable | read-write | current | The global enable status of VCT run. |
| 1.3.6.1.4.1.13464.1.2.1.1.14 | NodegbnPlatformOAMVctRunResult | |||
| 1.3.6.1.4.1.13464.1.2.1.1.14.1 | TablevctRunResultTable | not-accessible | current | A Table of VCT run result. |
| 1.3.6.1.4.1.13464.1.2.1.1.14.1.1 | RowvctRunResultEntry | not-accessible | current | A list of VCT run result. |
| 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.1 | ColumnvctRunResultPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.2 | ColumnvctRunResultTxRxPairNo | not-accessible | current | The tx rx pair NO. |
| 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.3 | ColumnvctRunResultStatus | read-only | current | The status of the VCT run result |
| 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.4 | ColumnvctRunResultErrorLocation | read-only | current | The error location of the VCT run result. length(m) |
| 1.3.6.1.4.1.13464.1.2.1.1.15 | NodegbnPlatformOAMTelnet | |||
| 1.3.6.1.4.1.13464.1.2.1.1.16 | NodegbnPlatformOAMIpControl | |||
| 1.3.6.1.4.1.13464.1.2.1.1.16.1 | ScalaripControlTtl | read-write | current | Enable/disable the ip control ttl |