MIB Viewer

GBOND-MIB

102 objects
The objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces, as defined in ITU-T Recommendations G.998.1, G.998.2, and G.998.3. This MIB module MUST be used in conjunction with a bonding scheme-specific MIB module, that is, G9981-MIB, G9982-MIB, or G9983-MIB. The following references are used throughout this MIB module: [G.998.1] refers to: ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding', January 2005. [G.998.2] refers to: ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair bonding', January 2005. [G.998.3] refers to: ITU-T Recommendation G.998.3: 'Multi-pair bonding using time-division inverse multiplexing', January 2005. [TR-159] refers to: Broadband Forum Technical Report: 'Management Framework for xDSL Bonding', December 2008. Naming Conventions: BCE - Bonding Channel Entity BTU - Bonding Terminating Unit BTU-C - Bonding Terminating Unit, CO side BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sub-layer PM - Performance Monitoring SNR - Signal to Noise Ratio TCA - Threshold Crossing Alert Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Imported Objects
HC-PerfHist-TC-MIB-- RFC 2863 HCPerfCurrentCount HCPerfIntervalCount HCPerfIntervalThreshold HCPerfInvalidIntervals HCPerfTimeElapsed HCPerfTotalCount HCPerfValidIntervals
IANA-GBOND-TC-MIB-- RFC 3705 IANAgBondScheme IANAgBondSchemeList
IF-MIB-- RFC 3411 ifIndex
SNMP-FRAMEWORK-MIB-- RFC 2580 SnmpAdminString
SNMPv2-CONF-- RFC 2579 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIGauge32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC-- RFC 2578 TEXTUAL-CONVENTION PhysAddress RowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.2.1.211IdentitygBondMIBThe objects in this MIB module are used to manage the multi-pair bonded xDSL interfaces, as defined in ITU-T Recommendations G.998.1, G.998.2, and G.998.3. Thi…
1.3.6.1.2.1.211.1NodegBondObjects
1.3.6.1.2.1.211.1.1NodegBondPort
1.3.6.1.2.1.211.1.1.0NodegBondPortNotifications
1.3.6.1.2.1.211.1.1.0.1NotificationgBondLowUpRateCrossingcurrentThis notification indicates that the G.Bond port's upstream data rate has reached/dropped below or exceeded the low upstream rate threshold, specified by gBond…
1.3.6.1.2.1.211.1.1.0.2NotificationgBondLowDnRateCrossingcurrentThis notification indicates that the G.Bond port's downstream data rate has reached/dropped below or exceeded the low downstream rate threshold, specified by g…
1.3.6.1.2.1.211.1.1.0.3NotificationgBondPmTca15MinESCrossingcurrentThis notification indicates that the Errored Seconds threshold, specified by gBondPortPmTcaProfileThresh15MinES, has been reached or exceeded for the GBS port.…
1.3.6.1.2.1.211.1.1.0.4NotificationgBondPmTca15MinSESCrossingcurrentThis notification indicates that the Severely Errored Seconds threshold, specified by gBondPortPmTcaProfileThresh15MinSES, has been reached or exceeded for the…
1.3.6.1.2.1.211.1.1.0.5NotificationgBondPmTca15MinUASCrossingcurrentThis notification indicates that the Unavailable Seconds threshold, specified by gBondPortPmTcaProfileThresh15MinUAS, has been reached or exceeded for the GBS …
1.3.6.1.2.1.211.1.1.0.6NotificationgBondPmTca1DayESCrossingcurrentThis notification indicates that the Errored Seconds threshold, specified by gBondPortPmTcaProfileThresh1DayES, has been reached or exceeded for the GBS port. …
1.3.6.1.2.1.211.1.1.0.7NotificationgBondPmTca1DaySESCrossingcurrentThis notification indicates that the Severely Errored Seconds threshold, specified by gBondPortPmTcaProfileThresh1DaySES, has been reached or exceeded for the …
1.3.6.1.2.1.211.1.1.0.8NotificationgBondPmTca1DayUASCrossingcurrentThis notification indicates that the Unavailable Seconds threshold, specified by gBondPortPmTcaProfileThresh1DayUAS, has been reached or exceeded for the GBS p…
1.3.6.1.2.1.211.1.1.1TablegBondPortConfTablenot-accessiblecurrentTable for configuration of G.Bond GBS ports. Entries in this table MUST be maintained in a persistent manner.
1.3.6.1.2.1.211.1.1.1.1RowgBondPortConfEntrynot-accessiblecurrentAn entry in the G.Bond Port Configuration table. Each entry represents a G.Bond port indexed by the ifIndex. Note that a G.Bond GBS port runs on top of a singl…
1.3.6.1.2.1.211.1.1.1.1.1ColumngBondPortConfAdminSchemeread-writecurrentA desired bonding scheme for a G.Bond GBS port. The following values instruct the port to use the corresponding bonding scheme if supported: none(0) - instruct…
1.3.6.1.2.1.211.1.1.1.1.2ColumngBondPortConfPeerAdminSchemeread-writecurrentA desired bonding scheme for a peer (link partner) G.Bond port (GBS). The following values instruct the peer port to use the corresponding bonding scheme if su…
1.3.6.1.2.1.211.1.1.1.1.3ColumngBondPortConfDiscoveryCoderead-writecurrentA discovery code of the G.Bond port (GBS). A unique 6-octet-long code used by the Discovery function. This object MUST be instantiated for the -O subtype GBS b…
1.3.6.1.2.1.211.1.1.1.1.4ColumngBondPortConfTargetUpDataRateread-writecurrentA desired G.Bond port data rate in the upstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by the…
1.3.6.1.2.1.211.1.1.1.1.5ColumngBondPortConfTargetDnDataRateread-writecurrentA desired G.Bond port data rate in the downstream direction, in Kbps, to be achieved during initialization, under restrictions placed upon the member BCEs by t…
1.3.6.1.2.1.211.1.1.1.1.6ColumngBondPortConfThreshLowUpRateread-writecurrentThis object configures the G.Bond port low upstream rate crossing alarm threshold. When the current value of gBondPortStatUpDataRate for this port reaches/drop…
1.3.6.1.2.1.211.1.1.1.1.7ColumngBondPortConfThreshLowDnRateread-writecurrentThis object configures the G.Bond port low downstream rate crossing alarm threshold. When the current value of gBondPortStatDnDataRate for this port reaches/dr…
1.3.6.1.2.1.211.1.1.1.1.8ColumngBondPortConfLowRateCrossingEnableread-writecurrentIndicates whether gBondLowUpRateCrossing and gBondLowDnRateCrossing notifications should be generated for this interface. A value of true(1) indicates that the…
1.3.6.1.2.1.211.1.1.1.1.9ColumngBondPortConfPmTcaConfProfileread-writecurrentThe value of this object is the index of the row in the GBS Port Alarm Configuration Profile table for Performance Monitoring Threshold Crossing Alerts which a…
1.3.6.1.2.1.211.1.1.1.1.10ColumngBondPortConfPmTcaEnableread-writecurrentIndicates whether the gBondPerfTca*Crossing set of notifications should be generated for this interface. A value of true(1) indicates that the notifications ar…
1.3.6.1.2.1.211.1.1.2TablegBondPortCapTablenot-accessiblecurrentTable for capabilities of G.Bond ports. Entries in this table MUST be maintained in a persistent manner.
1.3.6.1.2.1.211.1.1.2.1RowgBondPortCapEntrynot-accessiblecurrentAn entry in the G.Bond Port Capability table. Each entry represents a G.Bond port indexed by the ifIndex. Note that a G.Bond GBS port runs on top of a single o…
1.3.6.1.2.1.211.1.1.2.1.1ColumngBondPortCapSchemesSupportedread-onlycurrentBonding capability of the G.Bond port (GBS). This is a read-only bitmap of the possible bonding schemes supported by the GBS. The various bit positions are: no…
1.3.6.1.2.1.211.1.1.2.1.2ColumngBondPortCapPeerSchemesSupportedread-onlycurrentBonding capability of the peer G.Bond port (GBS). This is a read-only bitmap of the possible bonding schemes supported by the link partner GBS. The various bit…
1.3.6.1.2.1.211.1.1.2.1.3ColumngBondPortCapCapacityread-onlycurrentNumber of BCEs that can be aggregated by the local GBS. The number of BCEs currently assigned to a particular G.Bond port (gBondPortStatNumBCEs) is never great…
1.3.6.1.2.1.211.1.1.2.1.4ColumngBondPortCapPeerCapacityread-onlycurrentNumber of BCEs that can be aggregated by the peer GBS port. A value of 0 is returned when peer Bonding capacity is unknown (peer cannot be reached). This objec…
1.3.6.1.2.1.211.1.1.3TablegBondPortStatTablenot-accessiblecurrentThis table provides overall status information of G.Bond ports, complementing the generic status information from the ifTable of the IF-MIB. Additional status …
1.3.6.1.2.1.211.1.1.3.1RowgBondPortStatEntrynot-accessiblecurrentAn entry in the G.Bond Port Status table. Each entry represents a G.Bond port indexed by the ifIndex. Note that a G.Bond GBS port runs on top of a single or mu…
1.3.6.1.2.1.211.1.1.3.1.1ColumngBondPortStatOperSchemeread-onlycurrentCurrent operating bonding scheme of a G.Bond port. The possible values are: none(0) - bonding bypass on a single-BCE G.998.2 GBS g9981(1) - G.998.1 bonding g99…
1.3.6.1.2.1.211.1.1.3.1.2ColumngBondPortStatPeerOperSchemeread-onlycurrentCurrent operating bonding scheme of a G.Bond port link partner. The possible values are: unknown(0) - peer cannot be reached due to the link state or bonding b…
1.3.6.1.2.1.211.1.1.3.1.3ColumngBondPortStatUpDataRateread-onlycurrentA current G.Bond port operational data rate in the upstream direction, in bps. This object represents an estimation of the sum of individual BCE upstream data …
1.3.6.1.2.1.211.1.1.3.1.4ColumngBondPortStatDnDataRateread-onlycurrentA current G.Bond port operational data rate in the downstream direction, in bps. This object represents an estimation of the sum of individual BCE downstream d…
1.3.6.1.2.1.211.1.1.3.1.5ColumngBondPortStatFltStatusread-onlycurrentG.Bond (GBS) port fault status. This is a bitmap of possible conditions. The various bit positions are: noPeer - Peer GBS cannot be reached (e.g., no BCEs atta…
1.3.6.1.2.1.211.1.1.3.1.6ColumngBondPortStatSideread-onlycurrentG.Bond port mode of operation (subtype). The value of 'subscriber' indicates that the port is designated as '-R' subtype (all BCEs assigned to this port are of…
1.3.6.1.2.1.211.1.1.3.1.7ColumngBondPortStatNumBCEsread-onlycurrentNumber of BCEs that are currently aggregated by the local GBS (assigned to the G.Bond port using the ifStackTable). This number is never greater than gBondPort…
1.3.6.1.2.1.211.1.1.4NodegBondPortPM
1.3.6.1.2.1.211.1.1.4.1TablegBondPortPmCurTablenot-accessiblecurrentThis table contains current Performance Monitoring (PM) information for a GBS port. This table contains live data from the equipment and as such is NOT persist…
1.3.6.1.2.1.211.1.1.4.1.1RowgBondPortPmCurEntrynot-accessiblecurrentAn entry in the G.Bond Port PM table. Each entry represents a G.Bond port indexed by the ifIndex. Note that a G.Bond GBS port runs on top of a single or multip…
1.3.6.1.2.1.211.1.1.4.1.1.1ColumngBondPortPmCurESread-onlycurrentA count of Errored Seconds (ES) on the GBS since the BTU was last restarted. An Errored Second for a G.998.x interface is defined as a count of 1-second interv…
1.3.6.1.2.1.211.1.1.4.1.1.2ColumngBondPortPmCurSESread-onlycurrentA count of Severely Errored Seconds (SES) on the GBS since the BTU was last restarted. A Severely Errored Second for a G.998.x interface is defined as a count …
1.3.6.1.2.1.211.1.1.4.1.1.3ColumngBondPortPmCurUASread-onlycurrentA count of Unavailable Seconds (UAS) on the GBS since the BTU was last restarted. An Unavailable Second for a G.998.x interface is defined as a count of 1-seco…
1.3.6.1.2.1.211.1.1.4.1.1.4ColumngBondPortPmCur15MinValidIntervalsread-onlycurrentA number of 15-minute intervals for which data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collecte…
1.3.6.1.2.1.211.1.1.4.1.1.5ColumngBondPortPmCur15MinInvalidIntervalsread-onlycurrentA number of 15-minute intervals for which data was not always available. The value will typically be zero, except in cases where the data for some intervals ar…
1.3.6.1.2.1.211.1.1.4.1.1.6ColumngBondPortPmCur15MinTimeElapsedread-onlycurrentA count of seconds that have elapsed since the beginning of the current 15-minute performance interval. This object maps to the TR-159 attribute aGroupPerfCurr…
1.3.6.1.2.1.211.1.1.4.1.1.7ColumngBondPortPmCur15MinESread-onlycurrentA count of Errored Seconds (ES) on the GBS in the current 15-minute performance interval. This object maps to the TR-159 attribute aGroupPerfCurr15MinES.
1.3.6.1.2.1.211.1.1.4.1.1.8ColumngBondPortPmCur15MinSESread-onlycurrentA count of Severely Errored Seconds (SES) on the GBS in the current 15-minute performance interval. This object maps to the TR-159 attribute aGroupPerfCurr15Mi…
1.3.6.1.2.1.211.1.1.4.1.1.9ColumngBondPortPmCur15MinUASread-onlycurrentA count of Unavailable Seconds (UAS) on the GBS in the current 15-minute performance interval. This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS.
1.3.6.1.2.1.211.1.1.4.1.1.10ColumngBondPortPmCur1DayValidIntervalsread-onlycurrentA number of 1-day intervals for which data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collected by the …
1.3.6.1.2.1.211.1.1.4.1.1.11ColumngBondPortPmCur1DayInvalidIntervalsread-onlycurrentA number of 1-day intervals for which data was not always available. The value will typically be zero, except in cases where the data for some intervals are no…
1.3.6.1.2.1.211.1.1.4.1.1.12ColumngBondPortPmCur1DayTimeElapsedread-onlycurrentA count of seconds that have elapsed since the beginning of the current 1-day performance interval. This object maps to the TR-159 attribute aGroupPerfCurr1Day…
1.3.6.1.2.1.211.1.1.4.1.1.13ColumngBondPortPmCur1DayESread-onlycurrentA count of Errored Seconds (ES) on the GBS in the current 1-day performance interval. This object maps to the TR-159 attribute aGroupPerfCurr1DayES.
1.3.6.1.2.1.211.1.1.4.1.1.14ColumngBondPortPmCur1DaySESread-onlycurrentA count of Severely Errored Seconds (SES) on the GBS in the current 1-day performance interval. This object maps to the TR-159 attribute aGroupPerfCurr1DaySES.
1.3.6.1.2.1.211.1.1.4.1.1.15ColumngBondPortPmCur1DayUASread-onlycurrentA count of Unavailable Seconds (UAS) on the GBS in the current 1-day performance interval. This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS.
1.3.6.1.2.1.211.1.1.4.2TablegBondPortPm15MinTablenot-accessiblecurrentThis table contains historical 15-minute buckets of Performance Monitoring information for a GBS port (a row for each 15-minute interval, up to 96 intervals). …
1.3.6.1.2.1.211.1.1.4.2.1RowgBondPortPm15MinEntrynot-accessiblecurrentAn entry in the G.Bond Port historical 15-minute PM table. Each entry represents Performance Monitoring data for a GBS port, indexed by the ifIndex, collected …
1.3.6.1.2.1.211.1.1.4.2.1.1ColumngBondPortPm15MinIntervalIndexnot-accessiblecurrentPerformance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object maps to the TR…
1.3.6.1.2.1.211.1.1.4.2.1.2ColumngBondPortPm15MinIntervalMoniTimeread-onlycurrentA count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (900 seconds), except in a situ…
1.3.6.1.2.1.211.1.1.4.2.1.3ColumngBondPortPm15MinIntervalESread-onlycurrentA count of Errored Seconds (ES) on the GBS in the 15-minute performance history interval. This object maps to the TR-159 attribute aGroupPerf15MinIntervalES.
1.3.6.1.2.1.211.1.1.4.2.1.4ColumngBondPortPm15MinIntervalSESread-onlycurrentA count of Severely Errored Seconds (SES) on the GBS in the 15-minute performance history interval. This object maps to the TR-159 attribute aGroupPerf15MinInt…
1.3.6.1.2.1.211.1.1.4.2.1.5ColumngBondPortPm15MinIntervalUASread-onlycurrentA count of Unavailable Seconds (UAS) on the GBS in the current 15-minute performance interval. This object maps to the TR-159 attribute aGroupPerf15MinInterval…
1.3.6.1.2.1.211.1.1.4.2.1.6ColumngBondPortPm15MinIntervalValidread-onlycurrentA read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). …
1.3.6.1.2.1.211.1.1.4.3TablegBondPortPm1DayTablenot-accessiblecurrentThis table contains historical 1-day buckets of Performance Monitoring information for a GBS port (a row for each 1-day interval, up to 7 intervals). Entries i…
1.3.6.1.2.1.211.1.1.4.3.1RowgBondPortPm1DayEntrynot-accessiblecurrentAn entry in the G.Bond Port historical 1-day PM table. Each entry represents Performance Monitoring data for a GBS port, indexed by the ifIndex, collected duri…
1.3.6.1.2.1.211.1.1.4.3.1.1ColumngBondPortPm1DayIntervalIndexnot-accessiblecurrentPerformance data interval number. 1 is the most recent previous interval; interval 7 is 7 days ago. Intervals 2..7 are OPTIONAL. This object maps to the TR-159…
1.3.6.1.2.1.211.1.1.4.3.1.2ColumngBondPortPm1DayIntervalMoniTimeread-onlycurrentA count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), except in a si…
1.3.6.1.2.1.211.1.1.4.3.1.3ColumngBondPortPm1DayIntervalESread-onlycurrentA count of Errored Seconds (ES) on the GBS in the 1-day performance history interval. This object maps to the TR-159 attribute aGroupPerf1DayIntervalES.
1.3.6.1.2.1.211.1.1.4.3.1.4ColumngBondPortPm1DayIntervalSESread-onlycurrentA count of Severely Errored Seconds (SES) on the GBS in the 1-day performance history interval. This object maps to the TR-159 attribute aGroupPerf1DayInterval…
1.3.6.1.2.1.211.1.1.4.3.1.5ColumngBondPortPm1DayIntervalUASread-onlycurrentA count of Unavailable Seconds (UAS) on the GBS in the current 1-day performance interval. This object maps to the TR-159 attribute aGroupPerf1DayIntervalUAS.
1.3.6.1.2.1.211.1.1.4.3.1.6ColumngBondPortPm1DayIntervalValidread-onlycurrentA read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). …
1.3.6.1.2.1.211.1.1.4.4TablegBondPortPmTcaProfileTablenot-accessiblecurrentThis table supports definitions of Performance Monitoring (PM) Threshold Crossing Alert (TCA) configuration profiles for GBS ports. Entries in this table MUST …
1.3.6.1.2.1.211.1.1.4.4.1RowgBondPortPmTcaProfileEntrynot-accessiblecurrentAn entry in the GBS PM TCA Configuration table. Each entry corresponds to a single TCA configuration profile. Each profile contains a set of parameters for set…
1.3.6.1.2.1.211.1.1.4.4.1.1ColumngBondPortPmTcaProfileNamenot-accessiblecurrentThis object is a unique index (name) associated with this GBS PM TCA profile.
1.3.6.1.2.1.211.1.1.4.4.1.2ColumngBondPortPmTcaProfileThresh15MinESread-createcurrentA desired threshold for the number of Errored Seconds (ES) within any given 15-minute performance data collection interval. If the number of ESs in a particula…
1.3.6.1.2.1.211.1.1.4.4.1.3ColumngBondPortPmTcaProfileThresh15MinSESread-createcurrentA desired threshold for the number of Severely Errored Seconds (SES) within any given 15-minute performance data collection interval. If the number of SESs in …
1.3.6.1.2.1.211.1.1.4.4.1.4ColumngBondPortPmTcaProfileThresh15MinUASread-createcurrentA desired threshold for the number of Unavailable Seconds (UAS) within any given 15-minute performance data collection interval. If the number of UASs in a par…
1.3.6.1.2.1.211.1.1.4.4.1.5ColumngBondPortPmTcaProfileThresh1DayESread-createcurrentA desired threshold for the number of Errored Seconds (ES) within any given 1-day performance data collection interval. If the number of ESs in a particular 1-…
1.3.6.1.2.1.211.1.1.4.4.1.6ColumngBondPortPmTcaProfileThresh1DaySESread-createcurrentA desired threshold for the number of Severely Errored Seconds (SES) within any given 1-day performance data collection interval. If the number of SESs in a pa…
1.3.6.1.2.1.211.1.1.4.4.1.7ColumngBondPortPmTcaProfileThresh1DayUASread-createcurrentA desired threshold for the number of Unavailable Seconds (UAS) within any given 1-day performance data collection interval. If the number of UASs in a particu…
1.3.6.1.2.1.211.1.1.4.4.1.8ColumngBondPortPmTcaProfileRowStatusread-createcurrentThis object controls the creation, modification, or deletion of the associated entry in the gBondPortPmTcaProfileTable per the semantics of RowStatus. If an 'a…
1.3.6.1.2.1.211.1.2NodegBondBce
1.3.6.1.2.1.211.1.2.1TablegBondBceConfTablenot-accessiblecurrentTable for configuration of G.Bond common aspects for the Bonding Channel Entity (BCE) ports (modems/channels). Entries in this table MUST be maintained in a pe…
1.3.6.1.2.1.211.1.2.1.1RowgBondBceConfEntrynot-accessiblecurrentAn entry in the G.Bond BCE Configuration table. Each entry represents common aspects of a G.Bond BCE port indexed by the ifIndex. Note that a G.Bond BCE port c…
1.3.6.1.2.1.211.1.2.1.1.1ColumngBondBceConfRemoteDiscoveryCoderead-writecurrentA remote discovery code of the BCE port at the CO. A 6-octet-long discovery code of the peer GBS connected via the BCE. Reading this object results in a Discov…
1.3.6.1.2.1.211.2NodegBondConformance
1.3.6.1.2.1.211.2.1NodegBondGroups
1.3.6.1.2.1.211.2.1.1GroupgBondBasicGroupcurrentA collection of objects representing management information common to all types of G.Bond ports.
1.3.6.1.2.1.211.2.1.2GroupgBondDiscoveryGroupcurrentA collection of objects supporting OPTIONAL G.Bond discovery in G.Bond ports.
1.3.6.1.2.1.211.2.1.3GroupgBondMultiSchemeGroupcurrentA collection of objects providing OPTIONAL management information for G.Bond ports supporting multiple bonding schemes.
1.3.6.1.2.1.211.2.1.4GroupgBondTcaConfGroupcurrentA collection of objects required for configuration of alarm thresholds and notifications in G.Bond ports.
1.3.6.1.2.1.211.2.1.5GroupgBondTcaNotificationGroupcurrentThis group supports notifications of significant conditions (non-PM threshold crossing alerts) associated with G.Bond ports.
1.3.6.1.2.1.211.2.1.6GroupgBondPmCurGroupcurrentA collection of objects supporting OPTIONAL current Performance Monitoring information for G.Bond ports.
1.3.6.1.2.1.211.2.1.7GroupgBondPm15MinGroupcurrentA collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond ports, during previous 15-minute intervals.
1.3.6.1.2.1.211.2.1.8GroupgBondPm1DayGroupcurrentA collection of objects supporting OPTIONAL historical Performance Monitoring information for G.Bond ports, during previous 1-day intervals.
1.3.6.1.2.1.211.2.1.9GroupgBondPmTcaConfGroupcurrentA collection of objects required for configuration of Performance Monitoring Threshold Crossing Alert notifications in G.Bond ports.
1.3.6.1.2.1.211.2.1.10GroupgBondPmTcaNotificationGroupcurrentThis group supports notifications of Performance Monitoring Threshold Crossing Alerts associated with G.Bond ports.
1.3.6.1.2.1.211.2.2NodegBondCompliances
1.3.6.1.2.1.211.2.2.1CompliancegBondCompliancecurrentThe compliance statement for G.Bond interfaces. Compliance with the following external compliance statements is REQUIRED: MIB Module Compliance Statement IF-MI…
Type Definitions
NameSyntaxStatusDescription
GBondPm1DayIntervalThresholdUnsigned32 (0..86400)currentThis textual convention defines a range of values that may be set in a fault threshold alarm control for a 1-day Performance Monitoring interval. As the number of seconds in a 1-day interval numbers at most 86400, objec…