GENERAL-MGMT-MIB
38 objects
The structure of general management information for enterprise.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| SW3600PRIMGMT-MIB | dXS-3600-32S |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.127.1.20 | IdentityswGeneralMgmtMIB | The structure of general management information for enterprise. | ||
| 1.3.6.1.4.1.171.10.127.1.20.0 | NodeswGenMgmtNotifications | |||
| 1.3.6.1.4.1.171.10.127.1.20.1 | NodeswGenMgmtMIBObjects | |||
| 1.3.6.1.4.1.171.10.127.1.20.1.1 | NodeswGenMgmtGroup | |||
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1 | NodeswGenFileSystemMgmt | |||
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1 | TableswGenFileSystemMgmtTable | not-accessible | current | A list of MIB File System Basic Configuration entries supported by the file update of this agent. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1 | RowswGenFileSystemMgmtEntry | not-accessible | current | A File System basic configuration entry that contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.1 | ColumnswGenFileSystemMgmtIndex | not-accessible | current | The table index for the file entry. This object describes the file type. runtime-code (1), cfg-file (2), log-file (3) |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.2 | ColumnswGenFileSystemMgmtDscr | read-only | current | The description of the software file purpose in this entry. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.3 | ColumnswGenFileSystemMgmtServerAddrType | read-write | current | The address type where the file to be downloaded is located, or the address type where the file will be uploaded to. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.4 | ColumnswGenFileSystemMgmtServerAddr | read-write | current | The address where the file is to be downloaded from or uploaded to. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.5 | ColumnswGenFileSystemMgmtInterfaceName | read-write | current | This node is used to specify the interface name when swGenFileSystemMgmtServerAddr is the local link address. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.10 | ColumnswGenFileSystemMgmtTranserProtocol | read-write | current | The file transfer protocol. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.11 | ColumnswGenFileSystemMgmtUserName | read-write | current | The user name to access the server. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.12 | ColumnswGenFileSystemMgmtPassword | read-write | current | The password to access the server. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.20 | ColumnswGenFileSystemMgmtServerFileName | read-write | current | The name of the file to be downloaded from or uploaded to the server. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.21 | ColumnswGenFileSystemMgmtDeviceFileName | read-write | current | The name of the file to be downloaded to the device, or uploaded from the device. When downloading or uploading, the swGenFileSystemMgmtServerFileName object m… |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.30 | ColumnswGenFileSystemMgmtLoadType | read-write | current | This object allows the user to select a download or upload function for the file. Note: For systems that do not support changes to this object, setting a value… |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.1.1.1.100 | ColumnswGenFileSystemMgmtCtrl | read-write | current | This object allows the user to download runtime software. The settings will take effect when the system restarts. See Note (1) below Note 1: For systems which … |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.5 | TableswGenFileSystemBootupFileMgmtTable | not-accessible | current | This table indicates the information about the bootup files. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1 | RowswGenFileSystemBootupFileMgmtEntry | not-accessible | current | A list of information about the bootup files for each unit of the switch stack. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.1 | ColumnswGenMgmtUnitID | not-accessible | current | The object indicates the unit ID. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.3 | ColumnswGenFileSystemBootImage | read-write | current | When displayed, it shows the current bootup image file name. When set, the bootup image file with the set name will be set as the bootup image. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.5 | ColumnswGenFileSystemBootConfig | read-write | current | When displayed, it shows the current bootup configuration file name. When set, the configuration file with the set name will be set as the bootup configuration. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.10 | ColumnswGenFileSystemActiveConfigIncrement | read-write | current | If increment is specified, then the existing configuration will not be cleared before applying of the new configuration. If it is not specified, then the exist… |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.5.1.11 | ColumnswGenFileSystemActiveConfig | read-write | current | When displayed, it shows NULL. When set, the configuration file with the set name will be active at once, but the set name will not be set as the bootup config… |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8 | TableswGenExpansionModuleMgmtTable | not-accessible | current | This table indicates the information about the Boot-up Expansion Module and current Expansion Module. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1 | RowswGenExpansionModuleMgmtEntry | not-accessible | current | A list of information about the bootup files for each unit of the switch stack. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.2 | ColumnswGenExpansionModuleMgmtSlotID | not-accessible | current | The object indicates the expansion module slot ID. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.3 | ColumnswGenExpansionModuleMgmtBootup | read-only | current | It displays the expansion module name which the device boot up with. if no expansion module exist when boot up, it displays 'none'. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.4 | ColumnswGenExpansionModuleMgmtCurrent | read-only | current | It displays the current exsit expansion module name. if no expansion module exist, it displays 'none'. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.5 | ColumnswGenExpansionModuleBootupPortModeInfo | read-only | current | This object is a set of port mode for boot up DXS-3600-EM-4QXS module indications. Every bytes are presented to a port of the DXS-3600-EM-4QXS, if the module i… |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.6 | ColumnswGenExpansionModuleCurrentPortModeMGT | read-write | current | This object is a set of port mode for current insert DXS-3600-EM-4QXS module indications. Every bytes are presented to a port of the DXS-3600-EM-4QXS, it will … |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.8.1.7 | ColumnswGenExpansionModuleEquippedModulePortMode | read-only | current | This object is a set of port mode for current insert DXS-3600-EM-4QXS module indications. Every bytes are presented to a port of the DXS-3600-EM-4QXS, if the m… |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.10 | ScalarswGenMgmtReboot | read-write | current | Used to restart the switch. |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.11 | ScalarswGenMgmtSaveConfigFileName | read-write | current | The name of the configuration file that will be saved to the device. When swGenMgmtSave is set to configuration(2): If the swGenMgmtSaveConfigFileName is no NU… |
| 1.3.6.1.4.1.171.10.127.1.20.1.1.12 | ScalarswGenMgmtSave | read-write | current | This indicates the method of saving information to the NV-RAM of the device. other(1) - No action. configuration(2) - Save configuration. log(3) - Save log. al… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Ipv6Address | OCTET STRING (SIZE (16)) UnitList ::= OCTET STRING(SIZE (0..3)) | current | This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order. |