GENERIC-3COM-VLAN-MIB-1-0-7
38 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | -- RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.10 | Nodegeneric | |||
| 1.3.6.1.4.1.43.10.1 | NodegenExperimental | |||
| 1.3.6.1.4.1.43.10.1.14 | NodegenVirtual | |||
| 1.3.6.1.4.1.43.10.1.14.1 | Nodea3ComVlanGroup | |||
| 1.3.6.1.4.1.43.10.1.14.1.1 | Tablea3ComVlanGlobalMappingTable | not-accessible | mandatory | This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a glob… |
| 1.3.6.1.4.1.43.10.1.14.1.1.1 | Rowa3ComVlanGlobalMappingEntry | not-accessible | mandatory | An individual VLAN interface global mapping entry. Entries in this table are created by setting the a3ComVlanIfGlobalIdentifier object in the a3ComVlanIfTable … |
| 1.3.6.1.4.1.43.10.1.14.1.1.1.1 | Columna3ComVlanGlobalMappingIdentifier | not-accessible | mandatory | An index into the a3ComVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN in… |
| 1.3.6.1.4.1.43.10.1.14.1.1.1.2 | Columna3ComVlanGlobalMappingIfIndex | read-only | mandatory | The value of a3ComVlanIfIndex for the VLAN interface in the a3ComVlanIfTable, which is bound to the global identifier specified by this entry. |
| 1.3.6.1.4.1.43.10.1.14.1.2 | Tablea3ComVlanIfTable | not-accessible | mandatory | This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be … |
| 1.3.6.1.4.1.43.10.1.14.1.2.1 | Rowa3ComVlanIfEntry | not-accessible | mandatory | An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the a3ComNextAvailableVirtIfIn… |
| 1.3.6.1.4.1.43.10.1.14.1.2.1.1 | Columna3ComVlanIfIndex | not-accessible | mandatory | The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the a3ComNextAvailableVirtIfIndex ob… |
| 1.3.6.1.4.1.43.10.1.14.1.2.1.2 | Columna3ComVlanIfDescr | read-write | mandatory | This is a description of the VLAN interface. |
| 1.3.6.1.4.1.43.10.1.14.1.2.1.3 | Columna3ComVlanIfType | read-write | mandatory | The VLAN interface type. |
| 1.3.6.1.4.1.43.10.1.14.1.2.1.4 | Columna3ComVlanIfGlobalIdentifier | read-write | mandatory | An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, th… |
| 1.3.6.1.4.1.43.10.1.14.1.2.1.5 | Columna3ComVlanIfInfo | read-only | mandatory | A TLV encoded information string for the VLAN interface. The information contained within this string corresponds to VLAN information not contained within this… |
| 1.3.6.1.4.1.43.10.1.14.1.2.1.6 | Columna3ComVlanIfStatus | read-write | mandatory | The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: ac… |
| 1.3.6.1.4.1.43.10.1.14.1.2.1.7 | Columna3ComVlanIfModeType | read-write | mandatory | The VLAN mode type for this interface. This object can be set to: usedefault(1) open(2) closed(3) UseDefault Vlans: uses the bridge Vlan Mode value. The bridge… |
| 1.3.6.1.4.1.43.10.1.14.2 | Nodea3ComVlanProtocolsGroup | |||
| 1.3.6.1.4.1.43.10.1.14.2.1 | Tablea3ComIpVlanTable | not-accessible | mandatory | A list of IP VLAN interface information entries. Entries in this table are related to entries in the a3ComVlanIfTable by using the same index. |
| 1.3.6.1.4.1.43.10.1.14.2.1.1 | Rowa3ComIpVlanEntry | not-accessible | mandatory | A a3ComIpVlanEntry contains layer 3 information about a particular IP VLAN interface. Note entries in this table cannot be deleted until the entries in the ifS… |
| 1.3.6.1.4.1.43.10.1.14.2.1.1.1 | Columna3ComIpVlanIpNetAddress | read-write | mandatory | The IP network number for the IP VLAN interface defined in the a3ComVlanIfTable identified with the same index. The IpNetAdress and the IpNetMask must be set a… |
| 1.3.6.1.4.1.43.10.1.14.2.1.1.2 | Columna3ComIpVlanIpNetMask | read-write | mandatory | The IP network mask corresponding to the IP Network address defined by a3ComIpVlanIpNetAddress. The IpNetAdress and the IpNetMask must be set and the row creat… |
| 1.3.6.1.4.1.43.10.1.14.2.1.1.3 | Columna3ComIpVlanStatus | read-write | mandatory | The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: act… |
| 1.3.6.1.4.1.43.10.1.14.2.2 | Tablea3ComVlanProtocolTable | not-accessible | mandatory | This table lists the configured protocols per Vlan. A single entry exists in this list for each protocol configured on a VLAN interface. The a3ComVlanIfType ob… |
| 1.3.6.1.4.1.43.10.1.14.2.2.1 | Rowa3ComVlanProtocolEntry | not-accessible | mandatory | A a3ComVlanProtocolEntry contains a single VLAN to protocol entry. |
| 1.3.6.1.4.1.43.10.1.14.2.2.1.1 | Columna3ComVlanProtocolIfIndex | not-accessible | mandatory | The first indice of this row and the vlan's ifIndex in the ifTable. The value of this object is the same as the corresponding a3ComVlanIfIndex in the a3ComVlan… |
| 1.3.6.1.4.1.43.10.1.14.2.2.1.2 | Columna3ComVlanProtocolIndex | not-accessible | mandatory | The second indice of this row, which identifies one of possible many protocols associated with the VLAN interface identified by this entries first indice. The … |
| 1.3.6.1.4.1.43.10.1.14.2.2.1.3 | Columna3ComVlanProtocolStatus | read-write | mandatory | The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: ac… |
| 1.3.6.1.4.1.43.10.1.14.3 | Nodea3ComVirtualGroup | |||
| 1.3.6.1.4.1.43.10.1.14.3.1 | Scalara3ComNextAvailableVirtIfIndex | read-only | mandatory | The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The curr… |
| 1.3.6.1.4.1.43.10.1.14.4 | Nodea3ComEncapsulationGroup | |||
| 1.3.6.1.4.1.43.10.1.14.4.1 | Tablea3ComVlanEncapsIfTable | not-accessible | mandatory | This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the syst… |
| 1.3.6.1.4.1.43.10.1.14.4.1.1 | Rowa3ComVlanEncapsIfEntry | not-accessible | mandatory | An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the a3ComNextAva… |
| 1.3.6.1.4.1.43.10.1.14.4.1.1.1 | Columna3ComVlanEncapsIfIndex | not-accessible | mandatory | The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by … |
| 1.3.6.1.4.1.43.10.1.14.4.1.1.2 | Columna3ComVlanEncapsIfType | read-write | mandatory | The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. |
| 1.3.6.1.4.1.43.10.1.14.4.1.1.3 | Columna3ComVlanEncapsIfTag | read-write | mandatory | The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. |
| 1.3.6.1.4.1.43.10.1.14.4.1.1.4 | Columna3ComVlanEncapsIfStatus | read-write | mandatory | The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may … |