GERP-MIB
20 objects
The gerp MIB is targeted at easing gerp configuration via snmp tools.
Imported Objects
| GREENTECH-MASTER-MIB | gbnL2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.2.4.7 | IdentitygerpMib | The gerp MIB is targeted at easing gerp configuration via snmp tools. | ||
| 1.3.6.1.4.1.13464.1.2.4.7.1 | NodegerpMIBObjects | |||
| 1.3.6.1.4.1.13464.1.2.4.7.1.1 | Nodegerp | |||
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.1 | ScalargerpOnoff | read-write | current | Enable/disable gerp function for this bridge. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.2 | ScalargerpHealthTime | read-write | current | The hello timer is used by master or edge node for ring health detection. The correct operational formula: FailedTimer >= 3 * HelloTimer |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.3 | ScalargerpHealthTimeout | read-write | current | The timeout value used by master during ring health detection. The correct operational formula: FailedTimer >= 3 * HelloTimer |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.4 | ScalargerpMajorFaultTime | read-only | current | The timeout value used by assitant edge during ring health detection. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.5 | ScalargerpPrefwdTimeout | read-only | current | The block timeout value used by node when portup event occurs. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.6 | TablegerpDomainTable | not-accessible | current | A table that contains domain-specific information. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1 | RowgerpDomainEntry | not-accessible | current | A list of information maintained by every domain. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.1 | ColumngerpDomainId | not-accessible | current | The domain ID is used when network is managed in unit of domain, one domain should be a set of contiguous bridges. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.2 | ColumngerpMVlanId | read-write | current | The manage VLAN ID of the domain. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7 | TablegerpRingTable | not-accessible | current | A table that contains domain-and-ring-specific information. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1 | RowgerpRingEntry | not-accessible | current | A list of information maintained by every ring. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.1 | ColumngerpRingId | not-accessible | current | The identifier of ethernet ring which reside in a domain. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.2 | ColumngerpRingLevel | read-write | current | The ring level,0 means master ring, while 1 means sub ring. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.3 | ColumngerpBrdgRole | read-write | current | The bridge role in ethernet ring. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.4 | ColumngerpPriComPortId | read-write | current | The primary port id when bridge is master or transmit,the common port id otherwise. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.5 | ColumngerpSecEdgePortId | read-write | current | The secondary port id when bridge is master or transmit,the edge port id otherwise. |
| 1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.6 | ColumngerpRowStatus | read-write | current | This object indicates the status of this ring. |