GUDEADS-ATS3020-MIB
64 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28507 | Identitygudeads | |||
| 1.3.6.1.4.1.28507.40 | NodegadsATS3020 | |||
| 1.3.6.1.4.1.28507.40.0 | Nodeats3020Events | |||
| 1.3.6.1.4.1.28507.40.0.1 | Notificationats3020PrimaryPowerChangeEvt | current | Event is triggered when a primary power changes | |
| 1.3.6.1.4.1.28507.40.0.2 | Notificationats3020SecondaryPowerChangeEvt | current | Event is triggered when a secondary power changes | |
| 1.3.6.1.4.1.28507.40.0.3 | Notificationats3020PowerSelectEvt | current | Event is triggered when power changes between primary and secondary | |
| 1.3.6.1.4.1.28507.40.0.4 | Notificationats3020TempEvtSen1 | current | temperature limits exceeded | |
| 1.3.6.1.4.1.28507.40.0.5 | Notificationats3020HygroEvtSen1 | current | hygro limits exceeded | |
| 1.3.6.1.4.1.28507.40.0.6 | Notificationats3020InputEvtSen1 | current | change of logical input sensor state | |
| 1.3.6.1.4.1.28507.40.0.7 | Notificationats3020AmperageEvt1 | current | Event is triggered when a measured current is crossing the entered limits | |
| 1.3.6.1.4.1.28507.40.1 | Nodeats3020Objects | |||
| 1.3.6.1.4.1.28507.40.1.1 | Nodeats3020CommonConfig | |||
| 1.3.6.1.4.1.28507.40.1.1.1 | Nodeats3020SNMPaccess | |||
| 1.3.6.1.4.1.28507.40.1.1.1.1 | Scalarats3020TrapCtrl | read-write | current | 0 = off 1 = Ver. 1 2 = Ver. 2c |
| 1.3.6.1.4.1.28507.40.1.1.1.2 | Tableats3020TrapIPTable | not-accessible | current | list of all Trap receiver |
| 1.3.6.1.4.1.28507.40.1.1.1.2.1 | Rowats3020TrapIPEntry | not-accessible | current | an entry containing management informations regarding the list of trap receivers |
| 1.3.6.1.4.1.28507.40.1.1.1.2.1.1 | Columnats3020TrapIPIndex | not-accessible | current | A unique value, greater than zero, for each receiver slot. |
| 1.3.6.1.4.1.28507.40.1.1.1.2.1.2 | Columnats3020TrapAddr | read-write | current | DNS name or IP address specifying one Trap receiver slot. A port can optionally be specified: 'name:port' An empty string disables this slot. |
| 1.3.6.1.4.1.28507.40.1.3 | Nodeats3020IntActors | |||
| 1.3.6.1.4.1.28507.40.1.3.10 | Scalarats3020Buzzer | read-write | current | turn Buzzer on and off |
| 1.3.6.1.4.1.28507.40.1.5 | Nodeats3020IntSensors | |||
| 1.3.6.1.4.1.28507.40.1.5.1 | Nodeats3020PowerChan | |||
| 1.3.6.1.4.1.28507.40.1.5.1.1 | Scalarats3020ActivePowerChan | read-only | current | Number of suppported Power Channels. |
| 1.3.6.1.4.1.28507.40.1.5.1.2 | Tableats3020PowerTable | not-accessible | current | All available Channel Interfaces. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1 | Rowats3020PowerEntry | not-accessible | current | An entry containing management information applicable to a particular Power Channel. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.1 | Columnats3020PowerIndex | not-accessible | current | Index of Power Channel entries |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.2 | Columnats3020ChanStatus | read-only | current | 0 = data not active, 1 = data valid |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.3 | Columnats3020AbsEnergyActive | read-only | current | Absolute Active Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.4 | Columnats3020PowerActive | read-only | current | Active Power |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.5 | Columnats3020Current | read-only | current | Actual Curent on Power Channel. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.6 | Columnats3020Voltage | read-only | current | Actual Voltage on Power Channel |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.7 | Columnats3020Frequency | read-only | current | Frequency of Power Channel |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.8 | Columnats3020PowerFactor | read-only | current | Power Factor of Channel between -1.0 and 1.00 |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.9 | Columnats3020Pangle | read-only | current | Phase Angle between Voltage and L Line Current between -180.0 and 180.0 |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.10 | Columnats3020PowerApparent | read-only | current | L Line Mean Apparent Power |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.11 | Columnats3020PowerReactive | read-only | current | L Line Mean Reactive Power |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.12 | Columnats3020AbsEnergyReactive | read-only | current | Absolute Reactive Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.13 | Columnats3020AbsEnergyActiveResettable | read-only | current | Resettable Absolute Active Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.14 | Columnats3020AbsEnergyReactiveResettable | read-only | current | Resettable Absolute Reactive Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.15 | Columnats3020ResetTime | read-only | current | Time in seconds since last Energy Counter reset. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.16 | Columnats3020ForwEnergyActive | read-only | current | Forward Active Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.17 | Columnats3020ForwEnergyReactive | read-only | current | Forward Reactive Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.18 | Columnats3020ForwEnergyActiveResettable | read-only | current | Resettable Forward Active Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.19 | Columnats3020ForwEnergyReactiveResettable | read-only | current | Resettable Forward Reactive Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.20 | Columnats3020RevEnergyActive | read-only | current | Reverse Active Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.21 | Columnats3020RevEnergyReactive | read-only | current | Reverse Reactive Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.22 | Columnats3020RevEnergyActiveResettable | read-only | current | Resettable Reverse Active Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.1.2.1.23 | Columnats3020RevEnergyReactiveResettable | read-only | current | Resettable Reverse Reactive Energy counter. |
| 1.3.6.1.4.1.28507.40.1.5.11 | Nodeats3020PowerInfo | |||
| 1.3.6.1.4.1.28507.40.1.5.11.1 | Scalarats3020PrimPowAvail | read-only | current | not zero if primary Power available |
| 1.3.6.1.4.1.28507.40.1.5.11.2 | Scalarats3020SecPowAvail | read-only | current | not zero if secondary Power available |
| 1.3.6.1.4.1.28507.40.1.5.11.4 | Scalarats3020PowerSelect | read-only | current | if 1, power is primary if 2, power is secondary |
| 1.3.6.1.4.1.28507.40.1.6 | Nodeats3020ExtSensors | |||
| 1.3.6.1.4.1.28507.40.1.6.1 | Tableats3020SensorTable | not-accessible | current | |
| 1.3.6.1.4.1.28507.40.1.6.1.1 | Rowats3020SensorEntry | not-accessible | current | |
| 1.3.6.1.4.1.28507.40.1.6.1.1.1 | Columnats3020SensorIndex | not-accessible | current | |
| 1.3.6.1.4.1.28507.40.1.6.1.1.2 | Columnats3020TempSensor | read-only | current | actual temperature, a value of -9999 indicates that data is not available |
| 1.3.6.1.4.1.28507.40.1.6.1.1.3 | Columnats3020HygroSensor | read-only | current | actual humidity, a value of -9999 indicates that data is not available |
| 1.3.6.1.4.1.28507.40.1.6.1.1.4 | Columnats3020InputSensor | read-only | current | logical state of input sensor |
| 1.3.6.1.4.1.28507.40.3 | Nodeats3020Conf | |||
| 1.3.6.1.4.1.28507.40.3.1 | Nodeats3020Groups | |||
| 1.3.6.1.4.1.28507.40.3.1.1 | Groupats3020BasicGroup | current | Basic objects. | |
| 1.3.6.1.4.1.28507.40.3.1.2 | Groupats3020NotificationGroup | current | ||
| 1.3.6.1.4.1.28507.40.3.2 | Nodeats3020Compls |