GUDEADS-ENC2302-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28507 | Identitygudeads | |||
| 1.3.6.1.4.1.28507.70 | NodegadsENC2302 | |||
| 1.3.6.1.4.1.28507.70.1 | Nodeenc2302Objects | |||
| 1.3.6.1.4.1.28507.70.1.1 | Nodeenc2302CommonConfig | |||
| 1.3.6.1.4.1.28507.70.1.1.1 | Nodeenc2302SNMPaccess | |||
| 1.3.6.1.4.1.28507.70.1.1.1.1 | Scalarenc2302TrapCtrl | read-write | current | 0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3 |
| 1.3.6.1.4.1.28507.70.1.1.1.2 | Tableenc2302TrapIPTable | not-accessible | current | list of all Trap receiver |
| 1.3.6.1.4.1.28507.70.1.1.1.2.1 | Rowenc2302TrapIPEntry | not-accessible | current | an entry containing management informations regarding the list of trap receivers |
| 1.3.6.1.4.1.28507.70.1.1.1.2.1.1 | Columnenc2302TrapIPIndex | read-only | current | A unique value, greater than zero, for each receiver slot. |
| 1.3.6.1.4.1.28507.70.1.1.1.2.1.2 | Columnenc2302TrapAddr | read-write | current | DNS name or IP address specifying one Trap receiver slot. A port can optionally be specified: 'name:port' An empty string disables this slot. |
| 1.3.6.1.4.1.28507.70.1.2 | Nodeenc2302DeviceConfig | |||
| 1.3.6.1.4.1.28507.70.1.3 | Nodeenc2302IntActors | |||
| 1.3.6.1.4.1.28507.70.1.3.1 | Nodeenc2302relayports | |||
| 1.3.6.1.4.1.28507.70.1.3.1.1 | Scalarenc2302portNumber | read-only | current | The number of Relay Ports |
| 1.3.6.1.4.1.28507.70.1.3.1.2 | Tableenc2302portTable | not-accessible | current | list of all EPC Relay Ports |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1 | Rowenc2302portEntry | not-accessible | current | An entry containing management information applicable to a particular relay port. |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1.1 | Columnenc2302PortIndex | read-only | current | A unique value, greater than zero, for each Relay Port. |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1.2 | Columnenc2302PortName | read-write | current | A textual string containing name of a Relay Port. |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1.3 | Columnenc2302PortState | read-write | current | current state a Relay Port |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1.4 | Columnenc2302PortSwitchCount | read-only | current | The total number of switch actions ocurred on a Relay Port. Does not count switch commands which will not switch the ralay state, so just real relay switches a… |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1.5 | Columnenc2302PortStartupMode | read-write | current | set Mode of startup sequence (off, on , remember last state) |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1.6 | Columnenc2302PortStartupDelay | read-write | current | Delay in sec for startup action |
| 1.3.6.1.4.1.28507.70.1.3.1.2.1.7 | Columnenc2302PortRepowerTime | read-write | current | Delay in sec for repower port after switching off |
| 1.3.6.1.4.1.28507.70.1.4 | Nodeenc2302ExtActors | |||
| 1.3.6.1.4.1.28507.70.1.5 | Nodeenc2302IntSensors | |||
| 1.3.6.1.4.1.28507.70.1.5.6 | Nodeenc2302Inputs | |||
| 1.3.6.1.4.1.28507.70.1.5.6.1 | Scalarenc2302ActiveInputs | read-only | current | Number of suppported Input Channels. |
| 1.3.6.1.4.1.28507.70.1.5.6.2 | Tableenc2302InputTable | not-accessible | current | |
| 1.3.6.1.4.1.28507.70.1.5.6.2.1 | Rowenc2302InputEntry | not-accessible | current | |
| 1.3.6.1.4.1.28507.70.1.5.6.2.1.1 | Columnenc2302InputIndex | read-only | current | |
| 1.3.6.1.4.1.28507.70.1.5.6.2.1.2 | Columnenc2302Input | read-only | current | Input state of device |
| 1.3.6.1.4.1.28507.70.1.6 | Nodeenc2302ExtSensors | |||
| 1.3.6.1.4.1.28507.70.1.6.1 | Tableenc2302SensorTable | not-accessible | current | |
| 1.3.6.1.4.1.28507.70.1.6.1.1 | Rowenc2302SensorEntry | not-accessible | current | |
| 1.3.6.1.4.1.28507.70.1.6.1.1.1 | Columnenc2302SensorIndex | read-only | current | |
| 1.3.6.1.4.1.28507.70.1.6.1.1.2 | Columnenc2302TempSensor | read-only | current | actual temperature |
| 1.3.6.1.4.1.28507.70.1.6.1.1.3 | Columnenc2302HygroSensor | read-only | current | actual humidity |
| 1.3.6.1.4.1.28507.70.1.6.1.1.4 | Columnenc2302InputSensor | read-only | current | logical state of input sensor |
| 1.3.6.1.4.1.28507.70.1.6.1.1.5 | Columnenc2302AirPressure | read-only | current | actual air pressure |
| 1.3.6.1.4.1.28507.70.1.6.1.1.6 | Columnenc2302DewPoint | read-only | current | dew point for actual temperature and humidity |
| 1.3.6.1.4.1.28507.70.1.6.1.1.7 | Columnenc2302DewPointDiff | read-only | current | difference between dew point and actual temperature (Temp - DewPoint) |
| 1.3.6.1.4.1.28507.70.2 | Nodeenc2302Conf | |||
| 1.3.6.1.4.1.28507.70.2.1 | Nodeenc2302Groups | |||
| 1.3.6.1.4.1.28507.70.2.1.1 | Groupenc2302BasicGroup | current | Basic objects. | |
| 1.3.6.1.4.1.28507.70.2.1.2 | Groupenc2302NotificationGroup | current | ||
| 1.3.6.1.4.1.28507.70.2.2 | Nodeenc2302Compls | |||
| 1.3.6.1.4.1.28507.70.3 | Nodeevents | |||
| 1.3.6.1.4.1.28507.70.3.1 | Notificationenc2302SwitchEvtPort | current | Event is triggered when a port is switched | |
| 1.3.6.1.4.1.28507.70.3.2 | Notificationenc2302InputEvt | current | Change of device input. | |
| 1.3.6.1.4.1.28507.70.3.3 | Notificationenc2302TempEvtSen | current | temperature limits exceeded | |
| 1.3.6.1.4.1.28507.70.3.4 | Notificationenc2302HygroEvtSen | current | hygro limits exceeded | |
| 1.3.6.1.4.1.28507.70.3.5 | Notificationenc2302InputEvtSen | current | change of logical input sensor state | |
| 1.3.6.1.4.1.28507.70.3.6 | Notificationenc2302AirPressureEvtSen | current | Air Pressure limits exceeded | |
| 1.3.6.1.4.1.28507.70.3.7 | Notificationenc2302DewPtDiffEvtSen | current | Dew Point Difference limits exceeded |