GUDEADS-EPC8226-MIB
109 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28507 | Identitygudeads | |||
| 1.3.6.1.4.1.28507.58 | NodegadsEPC8226 | |||
| 1.3.6.1.4.1.28507.58.1 | Nodeepc8226Objects | |||
| 1.3.6.1.4.1.28507.58.1.1 | Nodeepc8226CommonConfig | |||
| 1.3.6.1.4.1.28507.58.1.1.1 | Nodeepc8226SNMPaccess | |||
| 1.3.6.1.4.1.28507.58.1.1.1.1 | Scalarepc8226TrapCtrl | read-write | current | 0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3 |
| 1.3.6.1.4.1.28507.58.1.1.1.2 | Tableepc8226TrapIPTable | not-accessible | current | list of all Trap receiver |
| 1.3.6.1.4.1.28507.58.1.1.1.2.1 | Rowepc8226TrapIPEntry | not-accessible | current | an entry containing management informations regarding the list of trap receivers |
| 1.3.6.1.4.1.28507.58.1.1.1.2.1.1 | Columnepc8226TrapIPIndex | read-only | current | A unique value, greater than zero, for each receiver slot. |
| 1.3.6.1.4.1.28507.58.1.1.1.2.1.2 | Columnepc8226TrapAddr | read-write | current | DNS name or IP address specifying one Trap receiver slot. A port can optionally be specified: 'name:port' An empty string disables this slot. |
| 1.3.6.1.4.1.28507.58.1.2 | Nodeepc8226DeviceConfig | |||
| 1.3.6.1.4.1.28507.58.1.3 | Nodeepc8226IntActors | |||
| 1.3.6.1.4.1.28507.58.1.3.1 | Nodeepc8226relayports | |||
| 1.3.6.1.4.1.28507.58.1.3.1.1 | Scalarepc8226portNumber | read-only | current | The number of Relay Ports |
| 1.3.6.1.4.1.28507.58.1.3.1.2 | Tableepc8226portTable | not-accessible | current | list of all EPC Relay Ports |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1 | Rowepc8226portEntry | not-accessible | current | An entry containing management information applicable to a particular relay port. |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1.1 | Columnepc8226PortIndex | read-only | current | A unique value, greater than zero, for each Relay Port. |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1.2 | Columnepc8226PortName | read-write | current | A textual string containing name of a Relay Port. |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1.3 | Columnepc8226PortState | read-write | current | current state of a Relay Port |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1.4 | Columnepc8226PortSwitchCount | read-only | current | The total number of switch actions ocurred on a Relay Port. Does not count switch commands which will not switch the ralay state, so just real relay switches a… |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1.5 | Columnepc8226PortStartupMode | read-write | current | set Mode of startup sequence (off, on , remember last state) |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1.6 | Columnepc8226PortStartupDelay | read-write | current | Delay in sec for startup action |
| 1.3.6.1.4.1.28507.58.1.3.1.2.1.7 | Columnepc8226PortRepowerTime | read-write | current | Delay in sec for repower port after switching off |
| 1.3.6.1.4.1.28507.58.1.3.10 | Scalarepc8226Buzzer | read-write | current | turn Buzzer on and off |
| 1.3.6.1.4.1.28507.58.1.4 | Nodeepc8226ExtActors | |||
| 1.3.6.1.4.1.28507.58.1.5 | Nodeepc8226IntSensors | |||
| 1.3.6.1.4.1.28507.58.1.5.1 | Nodeepc8226PowerChan | |||
| 1.3.6.1.4.1.28507.58.1.5.1.1 | Scalarepc8226ActivePowerChan | read-only | current | Number of suppported Power Channels. |
| 1.3.6.1.4.1.28507.58.1.5.1.2 | Tableepc8226PowerTable | not-accessible | current | All available Channel Interfaces. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1 | Rowepc8226PowerEntry | not-accessible | current | An entry containing management information applicable to a particular Power Channel. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.1 | Columnepc8226PowerIndex | read-only | current | Index of Power Channel entries |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.2 | Columnepc8226ChanStatus | read-only | current | 0 = data not active, 1 = data valid |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.3 | Columnepc8226AbsEnergyActive | read-only | current | Absolute Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.4 | Columnepc8226PowerActive | read-only | current | Active Power |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.5 | Columnepc8226Current | read-only | current | Actual Curent on Power Channel. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.6 | Columnepc8226Voltage | read-only | current | Actual Voltage on Power Channel |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.7 | Columnepc8226Frequency | read-only | current | Frequency of Power Channel |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.8 | Columnepc8226PowerFactor | read-only | current | Power Factor of Channel between -1.0 and 1.00 |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.9 | Columnepc8226Pangle | read-only | current | Phase Angle between Voltage and L Line Current between -180.0 and 180.0 |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.10 | Columnepc8226PowerApparent | read-only | current | L Line Mean Apparent Power |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.11 | Columnepc8226PowerReactive | read-only | current | L Line Mean Reactive Power |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.12 | Columnepc8226AbsEnergyReactive | read-only | current | Absolute Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.13 | Columnepc8226AbsEnergyActiveResettable | read-write | current | Resettable Absolute Active Energy counter. Writing '0' resets all resettable counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.14 | Columnepc8226AbsEnergyReactiveResettable | read-only | current | Resettable Absolute Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.15 | Columnepc8226ResetTime | read-only | current | Time in seconds since last Energy Counter reset. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.16 | Columnepc8226ForwEnergyActive | read-only | current | Forward Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.17 | Columnepc8226ForwEnergyReactive | read-only | current | Forward Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.18 | Columnepc8226ForwEnergyActiveResettable | read-only | current | Resettable Forward Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.19 | Columnepc8226ForwEnergyReactiveResettable | read-only | current | Resettable Forward Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.20 | Columnepc8226RevEnergyActive | read-only | current | Reverse Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.21 | Columnepc8226RevEnergyReactive | read-only | current | Reverse Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.22 | Columnepc8226RevEnergyActiveResettable | read-only | current | Resettable Reverse Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.1.2.1.23 | Columnepc8226RevEnergyReactiveResettable | read-only | current | Resettable Reverse Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.2 | Tableepc8226OVPTable | not-accessible | current | Overvoltage Protection Table This table may not be present on devices without OVP feature |
| 1.3.6.1.4.1.28507.58.1.5.2.1 | Rowepc8226OVPEntry | not-accessible | current | |
| 1.3.6.1.4.1.28507.58.1.5.2.1.1 | Columnepc8226OVPIndex | read-only | current | |
| 1.3.6.1.4.1.28507.58.1.5.2.1.2 | Columnepc8226OVPStatus | read-only | current | shows the status of the built-in Overvoltage Protection |
| 1.3.6.1.4.1.28507.58.1.5.5 | Nodeepc8226SinglePortPowerChan | |||
| 1.3.6.1.4.1.28507.58.1.5.5.1 | Scalarepc8226spActivePowerChan | read-only | current | Number of Single Port Power Channels. Value is zero on EPC 8220 series. |
| 1.3.6.1.4.1.28507.58.1.5.5.2 | Tableepc8226spPowerTable | not-accessible | current | All available Single Port Power Channel Interfaces. Indices 0-5 mean Ports A1 to A6, 6-11 are Ports B1 to B6. This table may not be present on devices that hav… |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1 | Rowepc8226spPowerEntry | not-accessible | current | An entry containing management information applicable to a particular Single Port Power Channel. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.1 | Columnepc8226spPowerIndex | read-only | current | Index of Single Port Power Channel entries. Indices 0-5 mean Ports A1 to A6, 6-11 are Ports B1 to B6. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.2 | Columnepc8226spChanStatus | read-only | current | 0 = data not active, 1 = data valid |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.3 | Columnepc8226spAbsEnergyActive | read-only | current | Absolute Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.4 | Columnepc8226spPowerActive | read-only | current | Active Power |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.5 | Columnepc8226spCurrent | read-only | current | Actual Curent on Power Channel. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.6 | Columnepc8226spVoltage | read-only | current | Actual Voltage on Power Channel |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.7 | Columnepc8226spFrequency | read-only | current | Frequency of Power Channel |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.8 | Columnepc8226spPowerFactor | read-only | current | Power Factor of Channel between -1.0 and 1.00 |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.9 | Columnepc8226spPangle | read-only | current | Phase Angle between Voltage and L Line Current between -180.0 and 180.0 |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.10 | Columnepc8226spPowerApparent | read-only | current | L Line Mean Apparent Power |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.11 | Columnepc8226spPowerReactive | read-only | current | L Line Mean Reactive Power |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.12 | Columnepc8226spAbsEnergyReactive | read-only | current | Absolute Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.13 | Columnepc8226spAbsEnergyActiveResettable | read-write | current | Resettable Absolute Active Energy counter. Writing '0' resets all resettable counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.14 | Columnepc8226spAbsEnergyReactiveResettable | read-only | current | Resettable Absolute Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.15 | Columnepc8226spResetTime | read-only | current | Time in seconds since last Energy Counter reset. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.16 | Columnepc8226spForwEnergyActive | read-only | current | Forward Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.17 | Columnepc8226spForwEnergyReactive | read-only | current | Forward Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.18 | Columnepc8226spForwEnergyActiveResettable | read-only | current | Resettable Forward Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.19 | Columnepc8226spForwEnergyReactiveResettable | read-only | current | Resettable Forward Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.20 | Columnepc8226spRevEnergyActive | read-only | current | Reverse Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.21 | Columnepc8226spRevEnergyReactive | read-only | current | Reverse Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.22 | Columnepc8226spRevEnergyActiveResettable | read-only | current | Resettable Reverse Active Energy counter. |
| 1.3.6.1.4.1.28507.58.1.5.5.2.1.23 | Columnepc8226spRevEnergyReactiveResettable | read-only | current | Resettable Reverse Reactive Energy counter. |
| 1.3.6.1.4.1.28507.58.1.6 | Nodeepc8226ExtSensors | |||
| 1.3.6.1.4.1.28507.58.1.6.1 | Tableepc8226SensorTable | not-accessible | current | |
| 1.3.6.1.4.1.28507.58.1.6.1.1 | Rowepc8226SensorEntry | not-accessible | current | |
| 1.3.6.1.4.1.28507.58.1.6.1.1.1 | Columnepc8226SensorIndex | read-only | current | |
| 1.3.6.1.4.1.28507.58.1.6.1.1.2 | Columnepc8226TempSensor | read-only | current | actual temperature |
| 1.3.6.1.4.1.28507.58.1.6.1.1.3 | Columnepc8226HygroSensor | read-only | current | actual humidity |
| 1.3.6.1.4.1.28507.58.1.6.1.1.4 | Columnepc8226InputSensor | read-only | current | logical state of input sensor |
| 1.3.6.1.4.1.28507.58.1.6.1.1.5 | Columnepc8226AirPressure | read-only | current | actual air pressure |
| 1.3.6.1.4.1.28507.58.1.6.1.1.6 | Columnepc8226DewPoint | read-only | current | dew point for actual temperature and humidity |
| 1.3.6.1.4.1.28507.58.1.6.1.1.7 | Columnepc8226DewPointDiff | read-only | current | difference between dew point and actual temperature (Temp - DewPoint) |
| 1.3.6.1.4.1.28507.58.2 | Nodeepc8226Conf | |||
| 1.3.6.1.4.1.28507.58.2.1 | Nodeepc8226Groups | |||
| 1.3.6.1.4.1.28507.58.2.1.1 | Groupepc8226BasicGroup | current | Basic objects. | |
| 1.3.6.1.4.1.28507.58.2.1.2 | Groupepc8226NotificationGroup | current | ||
| 1.3.6.1.4.1.28507.58.2.2 | Nodeepc8226Compls | |||
| 1.3.6.1.4.1.28507.58.3 | Nodeevents | |||
| 1.3.6.1.4.1.28507.58.3.1 | Notificationepc8226SwitchEvtPort | current | Event is triggered when a port is switched | |
| 1.3.6.1.4.1.28507.58.3.2 | Notificationepc8226TempEvtSen | current | temperature limits exceeded | |
| 1.3.6.1.4.1.28507.58.3.3 | Notificationepc8226HygroEvtSen | current | hygro limits exceeded | |
| 1.3.6.1.4.1.28507.58.3.4 | Notificationepc8226InputEvtSen | current | change of logical input sensor state | |
| 1.3.6.1.4.1.28507.58.3.5 | Notificationepc8226AirPressureEvtSen | current | Air Pressure limits exceeded | |
| 1.3.6.1.4.1.28507.58.3.6 | Notificationepc8226DewPtDiffEvtSen | current | Dew Point Difference limits exceeded | |
| 1.3.6.1.4.1.28507.58.3.7 | Notificationepc8226OVPEvt | current | Event is triggered when the OVP status changes | |
| 1.3.6.1.4.1.28507.58.3.8 | Notificationepc8226LineAmperageEvt | current | Event is triggered when a measured current is crossing the entered limits | |
| 1.3.6.1.4.1.28507.58.3.9 | Notificationepc8226PortAmperageEvt | current | Event is triggered when a measured current is crossing the entered limits |