H3C-CONFIG-MAN-MIB
88 objects
This MIB contains objects for managing the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. There are no constraints on this MIB.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.4 | Identityh3cConfig | This MIB contains objects for managing the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system… | ||
| 1.3.6.1.4.1.2011.10.2.4.1 | Nodeh3cConfigManObjects | |||
| 1.3.6.1.4.1.2011.10.2.4.1.1 | Nodeh3cCfgLog | |||
| 1.3.6.1.4.1.2011.10.2.4.1.1.1 | Scalarh3cCfgRunModifiedLast | read-only | current | The object records the value of sysUpTime when the current configuration running in the system was last modified. The value will be changed immediately after t… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.2 | Scalarh3cCfgRunSavedLast | read-only | current | The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than h3cCf… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.3 | Scalarh3cCfgStartModifiedLast | read-only | current | The object records the value of sysUpTime when the next-startup configuration used currently was last modified. It may have been modified by a save operation o… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.4 | Scalarh3cCfgLogLimitedEntries | read-only | current | The object shows the maximum number of rows in h3cCfgLogTable. The value supported by the system is 10. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.5 | Scalarh3cCfgLogDeletedEntries | read-only | current | The total number of rows deleted from h3cCfgLogTable. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.6 | Scalarh3cCfgLogWantBackup | read-write | current | Decide whether to back up the values of objects for h3cCfgLog. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7 | Tableh3cCfgLogTable | not-accessible | current | Table for logging configuration operations on device . |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1 | Rowh3cCfgLogEntry | not-accessible | current | Information of the entry. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.1 | Columnh3cCfgLogIndex | not-accessible | current | Index of the table beginning from 1. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.2 | Columnh3cCfgLogTime | read-only | current | Specify the sysUpTime when the configuration log was generated. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.3 | Columnh3cCfgLogSrcCmd | read-only | current | Specify the source command which brought the log. Currently, we provide the following types of sources: 1.cmdLine(1):configure log instigated by command line. … |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.4 | Columnh3cCfgLogSrcData | read-only | current | The source of the configuration data event. erase erasing destination runningData operational data alive commandSource the command source itself startupData wh… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.5 | Columnh3cCfgLogDesData | read-only | current | The destination for the configuration data event. unknown unknown runningData operational data alive commandSource the command source itself startupData what t… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.6 | Columnh3cCfgLogTerminalType | read-only | current | Specifies the terminal type. If h3cCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): u… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.7 | Columnh3cCfgLogTerminalUser | read-only | current | The name of logging user which is available when h3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.8 | Columnh3cCfgLogTerminalNum | read-only | current | Specifies the terminal number. If h3cCfgLogSrcCmd is not 'cmdLine', use '-1' |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.9 | Columnh3cCfgLogTerminalLocation | read-only | current | The location of logging user which is available when h3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.10 | Columnh3cCfgLogCmdSrcAddress | read-only | deprecated | The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of h3cCfgLo… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.11 | Columnh3cCfgLogVirHost | read-only | current | The host name of remote system connected if h3cCfgLogTerminalType has the value of 'virtual'. Other, a zero length string. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.12 | Columnh3cCfgLogUserName | read-only | current | The user name used when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a zero length string. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.13 | Columnh3cCfgLogServerAddress | read-only | deprecated | The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. This object is replaced by h3cCfgLogS… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.14 | Columnh3cCfgLogFile | read-only | current | The current configuration file name when h3cCfgLogSrcData has the value of 'netFtp', and h3cCfgLogDesData has the value of 'startupData'. Other, a zero length … |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.15 | Columnh3cCfgLogCmdSrcAddrType | read-only | current | The type of IP address for the h3cCfgLogCmdSrcAddrRev. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.16 | Columnh3cCfgLogCmdSrcAddrRev | read-only | current | The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of h3cCfgLo… |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.17 | Columnh3cCfgLogCmdSrcAddrVPNName | read-only | current | The VPN instance of this operation uses. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.18 | Columnh3cCfgLogServerAddrType | read-only | current | The type of IP address for the h3cCfgLogServerAddrRev. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.19 | Columnh3cCfgLogServerAddrRev | read-only | current | The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.20 | Columnh3cCfgLogServerAddrVPNName | read-only | current | The VPN instance of this operation uses. |
| 1.3.6.1.4.1.2011.10.2.4.1.1.8 | Scalarh3cCfgFirstTrapTime | accessible-for-notify | current | Time when the first trap is sent. |
| 1.3.6.1.4.1.2011.10.2.4.1.2 | Nodeh3cCfgOperate | |||
| 1.3.6.1.4.1.2011.10.2.4.1.2.1 | Scalarh3cCfgOperateGlobalEntryLimit | read-only | current | The maximum number of copy entries that may be held in h3cCfgOperateTable. A particular setting does not guarantee that much data can be held. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.2 | Scalarh3cCfgOperateEntryAgeOutTime | read-write | current | The number of minutes an unactive h3cCfgOperateEntry SHOULD be kept in the h3cCfgOperateTable before it is active. The object is a factor taken account of when… |
| 1.3.6.1.4.1.2011.10.2.4.1.2.3 | Scalarh3cCfgOperateResultGlobalEntryLimit | read-write | current | The maximum number of copy entries that may be held in h3cCfgOperateResultTable. A particular setting does not guarantee that much data can be held. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4 | Tableh3cCfgOperateTable | not-accessible | current | A table of config-operation requests. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1 | Rowh3cCfgOperateEntry | not-accessible | current | An operate request entry. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.1 | Columnh3cCfgOperateIndex | not-accessible | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.2 | Columnh3cCfgOperateType | read-create | current | Specify the type of operation on configuration. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.3 | Columnh3cCfgOperateProtocol | read-create | current | If the value of h3cCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this node specify the protocol to be used for file transfer . The defa… |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.4 | Columnh3cCfgOperateFileName | read-create | current | When the object of h3cCfgOperateType has the value of net2Startup, net2running, running2Net, running2File or file2Running, the value must be specified. The fil… |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.5 | Columnh3cCfgOperateServerAddress | read-create | deprecated | When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be … |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.6 | Columnh3cCfgOperateUserName | read-create | current | When the operation type is running2Net,net2Running,net2Startup or startup2net, the user name for the ftp server from/to which to download/upload should be spec… |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.7 | Columnh3cCfgOperateUserPassword | read-create | current | When the operation type is running2Net,net2Running,net2Startup or startup2net, the user password for the ftp server from/to which to download/upload should be … |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.8 | Columnh3cCfgOperateEndNotificationSwitch | read-create | current | Specifies whether or not a notification should be issued on the completion of the operation. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.9 | Columnh3cCfgOperateRowStatus | read-create | current | The status of this table entry. When the status is active all the object's value in the entry is not allowed to be modified. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.10 | Columnh3cCfgOperateServerPort | read-create | current | When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or … |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.11 | Columnh3cCfgOperateSrvAddrType | read-create | current | The type of IP address for h3cCfgOperateSrvAddrRev. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.12 | Columnh3cCfgOperateSrvAddrRev | read-create | current | When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be … |
| 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.13 | Columnh3cCfgOperateSrvVPNName | read-create | current | The VPN instance of this operation uses. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5 | Tableh3cCfgOperateResultTable | not-accessible | current | A table of config-operation requests result. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1 | Rowh3cCfgOperateResultEntry | not-accessible | current | The result entries of configuration operation requests. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.1 | Columnh3cCfgOperateResultIndex | not-accessible | current | The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existi… |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.2 | Columnh3cCfgOperateResultOptIndex | read-only | current | The operation index in the h3cCfgOperateTable. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.3 | Columnh3cCfgOperateResultOpType | read-only | current | The operation type in the h3cCfgOperateTable. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.4 | Columnh3cCfgOperateState | read-only | current | The operation state type in the h3cCfgOperateTable. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.5 | Columnh3cCfgOperateTime | read-only | current | Record the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.6 | Columnh3cCfgOperateEndTime | read-only | current | The value of sysUpTime when the configuration operation is finished. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.7 | Columnh3cCfgOperFailReason | read-only | current | The failure reasons of configuration operation. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.8 | Columnh3cCfgOperateFailCmd | read-only | current | The failure cmd of configuration operation. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.9 | Columnh3cCfgOperateFailCmdView | read-only | current | The failure cmd view of configuration operation. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.10 | Columnh3cCfgOperateFailCmdReason | read-only | current | The failure cmd reasons of configuration operation. The failed reason is : 'Failed to execute command.' 'Failed to parse command.' |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6 | Nodeh3cCfgExecuteOperate | |||
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.1 | Scalarh3cCfgExecuteOperateResultEntryLimit | read-write | current | The maximum number of ConfigOperationType entries that may be held in h3cCfgExecuteResultTable. A particular setting does not guarantee that much data can be h… |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2 | Tableh3cCfgExecuteResultTable | not-accessible | current | A table of configuration execute result. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1 | Rowh3cCfgExecuteResultEntry | not-accessible | current | The result entries of configuration execute operation. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.1 | Columnh3cCfgExecuteResultIndex | not-accessible | current | The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existi… |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.2 | Columnh3cCfgExecuteResultOptIndex | read-only | current | The configuration execute operation index in the h3cCfgExecuteResultTable. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.3 | Columnh3cCfgExecuteResultOpType | read-only | current | The operation type in the h3cCfgExecuteResultTable. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.4 | Columnh3cCfgExecuteState | read-only | current | Record the status of the specified operation. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.5 | Columnh3cCfgExecuteTime | read-only | current | Record the time of the execution starts. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.6 | Columnh3cCfgExecuteEndTime | read-only | current | Record the time of the execution is finished. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.7 | Scalarh3cCfgReset | read-write | current | Reboot the device with the default configuration. |
| 1.3.6.1.4.1.2011.10.2.4.1.2.8 | Scalarh3cCfgReset2 | read-write | current | normal:do nothing. reset :reboot the device with the default configuration. 'normal' will be returned when getting. This node differs from h3cCfgReset in value. |
| 1.3.6.1.4.1.2011.10.2.4.2 | Nodeh3cConfigManNotifications | |||
| 1.3.6.1.4.1.2011.10.2.4.2.1 | Notificationh3cCfgManEventlog | current | The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the … | |
| 1.3.6.1.4.1.2011.10.2.4.2.2 | Notificationh3cCfgOperateCompletion | current | When create h3cCfgOperateTable successfully, a notification may be generated. | |
| 1.3.6.1.4.1.2011.10.2.4.2.3 | Notificationh3cCfgInvalidConfigFile | current | When the configuration file is invalid, this notification will be generated. | |
| 1.3.6.1.4.1.2011.10.2.4.3 | Nodeh3cConfigManConformance | |||
| 1.3.6.1.4.1.2011.10.2.4.3.1 | Nodeh3cConfigManCompliances | |||
| 1.3.6.1.4.1.2011.10.2.4.3.1.1 | Complianceh3cConfigManCompliance | current | The statement of compliance for those implementing the configuration management MIB. | |
| 1.3.6.1.4.1.2011.10.2.4.3.2 | Nodeh3cConfigManGroups | |||
| 1.3.6.1.4.1.2011.10.2.4.3.2.1 | Grouph3cCfgManLogGroup | current | A collection of objects configuration log group. | |
| 1.3.6.1.4.1.2011.10.2.4.3.2.2 | Grouph3cCfgOperateGroup | current | A group of configuration operation. | |
| 1.3.6.1.4.1.2011.10.2.4.3.2.3 | Grouph3cCfgManNotificationGroup | current | Collection of notification objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ConfigOperationStateType | INTEGER { opInProgress(1), opSuccess(2), opInvalidOperation(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeOut(18), opUnknownFailure(19), opInvalidConfigFile(20), opSlaveFull(21), opCopyToSlaveFailure(22) } | current | The status of the specified operation. opInProgress : Specified operation is active. opOperationSuccess : Specified operation is supported and completed successfully. opInvalidOperation : Command invalid or command/prot… |
| ConfigOperationType | INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6), running2File(7), file2Running(8) } | current | Specify operation types on configuration. Currently, the following types of operations are provided: running2Startup(1): Update the next-startup configuration file with the current configuration running in the system. T… |