H3C-DHCP-SNOOP2-MIB
50 objects
DHCP SNOOPING MIB 2
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressIPv4 |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.124 | Identityh3cDhcpSnoop2 | DHCP SNOOPING MIB 2 | ||
| 1.3.6.1.4.1.2011.10.2.124.1 | Nodeh3cDhcpSnoop2ScalarObjects | |||
| 1.3.6.1.4.1.2011.10.2.124.1.1 | Nodeh3cDhcpSnoop2ConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.124.1.1.1 | Scalarh3cDhcpSnoop2Enabled | read-write | current | If the value of this object is set to 'true', DHCP snooping is enabled. |
| 1.3.6.1.4.1.2011.10.2.124.1.1.2 | Scalarh3cDhcpSnoop2BindDbName | read-write | current | Name of the file that used to store binding information. If the value of the object is set to a zero-length string, the configuration will be removed. |
| 1.3.6.1.4.1.2011.10.2.124.1.1.3 | Scalarh3cDhcpSnoop2BindRefreshIntvl | read-write | current | The refresh interval of the binding information in seconds. |
| 1.3.6.1.4.1.2011.10.2.124.1.1.4 | Scalarh3cDhcpSnoop2BindRefresh | read-write | current | If the value of this object is set to 'on', the binding information will be refreshed immediately. |
| 1.3.6.1.4.1.2011.10.2.124.1.2 | Nodeh3cDhcpSnoop2StatisticsGroup | |||
| 1.3.6.1.4.1.2011.10.2.124.1.2.1 | Scalarh3cDhcpSnoop2PktSentNum | read-only | current | The total number of the packets send by DHCP snooping. |
| 1.3.6.1.4.1.2011.10.2.124.1.2.2 | Scalarh3cDhcpSnoop2PktRcvNum | read-only | current | The total number of the packets received by DHCP snooping. |
| 1.3.6.1.4.1.2011.10.2.124.1.2.3 | Scalarh3cDhcpSnoop2PktDropNum | read-only | current | The total number of the packets dropped by DHCP snooping. |
| 1.3.6.1.4.1.2011.10.2.124.2 | Nodeh3cDhcpSnoop2Tables | |||
| 1.3.6.1.4.1.2011.10.2.124.2.1 | Tableh3cDhcpSnoop2BindTable | not-accessible | current | The table containing information of DHCP clients listened by DHCP snooping. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1 | Rowh3cDhcpSnoop2BindEntry | not-accessible | current | An entry containing information of DHCP clients. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1.1 | Columnh3cDhcpSnoop2BindIpAddr | not-accessible | current | DHCP client's IP addresses collected by DHCP snooping. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1.2 | Columnh3cDhcpSnoop2BindVlanId | not-accessible | current | DHCP client's VLAN ID collected by DHCP snooping. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1.3 | Columnh3cDhcpSnoop2BindSecVlanId | not-accessible | current | DHCP client's second VLAN ID collected by DHCP snooping. 65535 means no second VLAN. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1.4 | Columnh3cDhcpSnoop2BindMacAddr | read-only | current | DHCP client's MAC address collected by DHCP snooping. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1.5 | Columnh3cDhcpSnoop2BindLease | read-only | current | Left lease time in seconds collected by DHCP snooping. The value of this object cannot be 0. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1.6 | Columnh3cDhcpSnoop2BindPortIndex | read-only | current | DHCP client's port index collected by DHCP snooping. The value of zero means unknown port. |
| 1.3.6.1.4.1.2011.10.2.124.2.1.1.7 | Columnh3cDhcpSnoop2BindRowStatus | read-create | current | RowStatus. Only destroy action is allow to use. |
| 1.3.6.1.4.1.2011.10.2.124.2.2 | Tableh3cDhcpSnoop2IfConfigTable | not-accessible | current | A table is used to configure DHCP snooping functions on ports. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1 | Rowh3cDhcpSnoop2IfConfigEntry | not-accessible | current | An entry containing DHCP snooping configurations of ports. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.1 | Columnh3cDhcpSnoop2IfTrustStatus | read-write | current | Trusted status of the port. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.2 | Columnh3cDhcpSnoop2IfCheckMac | read-write | current | If the value is 'true', MAC address of DHCP packets received on the port will be checked. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.3 | Columnh3cDhcpSnoop2IfCheckRequest | read-write | current | If the value is 'true', DHCP request packets will be checked. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.4 | Columnh3cDhcpSnoop2IfRateLimit | read-write | current | The rate limit in Kbps. If the value is 0, there is no rate limit on the port. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.5 | Columnh3cDhcpSnoop2IfRecordBind | read-write | current | If the value is 'true', information of DHCP packets received on the port will be recorded. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.6 | Columnh3cDhcpSnoop2IfMaxLearnNum | read-write | current | The maximum number of binding entries that could be learned on the port. If the value is 0, it means that there is no threshold on the port. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.7 | Columnh3cDhcpSnoop2IfOpt82Enable | read-write | current | If DHCP snooping supports option 82 functions, the value is 'true'. If DHCP snooping does NOT support option 82 functions, the value is 'false'. |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.8 | Columnh3cDhcpSnoop2IfOpt82Strategy | read-write | current | The strategy of DHCP snooping handling option 82. 'drop' indicates DHCP snooping discarding the request packet including option 82. 'keep' indicates DHCP snoop… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.9 | Columnh3cDhcpSnoop2IfOpt82CIDMode | read-write | current | The mode of filling in the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defi… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.10 | Columnh3cDhcpSnoop2IfOpt82CIDNodeType | read-write | current | Type of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of h3cDhcpSnoop2IfOption82CIDMode is set to 'verbos… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.11 | Columnh3cDhcpSnoop2IfOpt82CIDNodeStr | read-write | current | The string defined by user to fill in the node identifier in the verbose mode. If the value of h3cDhcpSnoop2IfOpt82CIDMode is NOT 'verbose', or the value of h3… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.12 | Columnh3cDhcpSnoop2IfOpt82CIDStr | read-write | current | The string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of h3cDhcpSnoop2IfOpt82CIDMode is NOT 'userDe… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.13 | Columnh3cDhcpSnoop2IfOpt82CIDFormat | read-write | current | The format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.14 | Columnh3cDhcpSnoop2IfOpt82RIDMode | read-write | current | The mode of filling in the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'userDefine' is the user-defined mode. 'sysname' is the sysnam… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.15 | Columnh3cDhcpSnoop2IfOpt82RIDStr | read-write | current | The string defined by user to fill in the remote ID in the user-defined mode. If the value of h3cDhcpSnoop2IfOpt82RIDMode is NOT 'userDefine', this object is s… |
| 1.3.6.1.4.1.2011.10.2.124.2.2.1.16 | Columnh3cDhcpSnoop2IfOpt82RIDFormat | read-write | current | The format of DHCP option 82 remote ID in 'normal' mode. 'hex' is the hex format. 'ascii' is the ascii format. If the value of h3cDhcpSnoop2IfOpt82RIDMode is '… |
| 1.3.6.1.4.1.2011.10.2.124.2.3 | Tableh3cDhcpSnoop2IfVlanCIDTable | not-accessible | current | A table containing the information of the circuit ID suboption of DHCP option 82 in VLAN. |
| 1.3.6.1.4.1.2011.10.2.124.2.3.1 | Rowh3cDhcpSnoop2IfVlanCIDEntry | not-accessible | current | An entry containing the information of the circuit ID suboption of DHCP option 82 in VLAN. |
| 1.3.6.1.4.1.2011.10.2.124.2.3.1.1 | Columnh3cDhcpSnoop2IfVlanCIDVlanIndex | not-accessible | current | VLAN ID. |
| 1.3.6.1.4.1.2011.10.2.124.2.3.1.2 | Columnh3cDhcpSnoop2IfVlanCIDStr | read-create | current | The string defined by user to fill in the circuit ID suboption of option 82. |
| 1.3.6.1.4.1.2011.10.2.124.2.3.1.3 | Columnh3cDhcpSnoop2IfVlanCIDRowStatus | read-create | current | Operation status of this table entry. Three actions are used: active, createAndGo, destroy. |
| 1.3.6.1.4.1.2011.10.2.124.2.4 | Tableh3cDhcpSnoop2IfVlanRIDTable | not-accessible | current | A table containing the information of the remote ID suboption of DHCP option 82 in VLAN. |
| 1.3.6.1.4.1.2011.10.2.124.2.4.1 | Rowh3cDhcpSnoop2IfVlanRIDEntry | not-accessible | current | An entry containing the information of the remote ID suboption of DHCP option 82 in VLAN. |
| 1.3.6.1.4.1.2011.10.2.124.2.4.1.1 | Columnh3cDhcpSnoop2IfVlanRIDVlanIndex | not-accessible | current | VLAN ID. |
| 1.3.6.1.4.1.2011.10.2.124.2.4.1.2 | Columnh3cDhcpSnoop2IfVlanRIDMode | read-create | current | The mode of filling in the remote ID suboption of DHCP option 82 in VLAN. 'sysname' indicates using the device sysname to fill in the suboption. 'userDefine' i… |
| 1.3.6.1.4.1.2011.10.2.124.2.4.1.3 | Columnh3cDhcpSnoop2IfVlanRIDStr | read-create | current | The string used to fill in the remote ID suboption. If the value of h3cDhcpSnoop2IfVlanRIDMode is NOT 'userDefine', this object is set with a zero-length strin… |
| 1.3.6.1.4.1.2011.10.2.124.2.4.1.4 | Columnh3cDhcpSnoop2IfVlanRIDRowStatus | read-create | current | Operation status of this table entry. Three actions are used: active, createAndGo, destroy. |