H3C-DOMAIN-MIB
80 objects
The MIB module is used for managing domain.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.46 | Identityh3cDomain | The MIB module is used for managing domain. | ||
| 1.3.6.1.4.1.2011.10.2.46.1 | Nodeh3cDomainControl | |||
| 1.3.6.1.4.1.2011.10.2.46.1.1 | Scalarh3cDomainDefault | read-write | current | Specifies default domain on the equipment. Default value is 'system'. |
| 1.3.6.1.4.1.2011.10.2.46.2 | Nodeh3cDomainTables | |||
| 1.3.6.1.4.1.2011.10.2.46.2.1 | Tableh3cDomainInfoTable | not-accessible | current | The (conceptual) table listing the domains. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1 | Rowh3cDomainInfoEntry | not-accessible | current | An entry (conceptual row) representing a domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.1 | Columnh3cDomainName | not-accessible | current | An index uniquely identifies a domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.2 | Columnh3cDomainState | read-create | current | The state of the domain, which reflects whether the domain is active. Default value is active. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.3 | Columnh3cDomainMaxAccessNum | read-create | current | The maximum number which the domain allows to access. If the value is set to 0, the access limit will be disabled. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.4 | Columnh3cDomainVlanAssignMode | read-create | current | The vlan assignment mode. The mode SHOULD be the same as the mode of corresponding server. 1 (integer) - Integer Vlan assignment mode. 2 (string) - String Vlan… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.5 | Columnh3cDomainIdleCutEnable | read-create | current | The idle cut control. Setting this attribute to true, the connection will be cut when the flow is less than h3cDomainIdleCutMinFlow and lasts h3cDomainIdleCutM… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.6 | Columnh3cDomainIdleCutMaxTime | read-create | current | The maximal time of idle-cut. The unit is minute. If the value of h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMaxTime is meaningless. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.7 | Columnh3cDomainIdleCutMinFlow | read-create | current | The minimal flow of idle-cut. The unit is byte. If the value of h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMinFlow is meaningless. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.8 | Columnh3cDomainMessengerEnable | read-create | current | The messenger service control. If set h3cDomainMessengerEnable to true, h3cDomainMessengerLimitTime and h3cDomainMessengerSpanTime must be set to valid values.… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.9 | Columnh3cDomainMessengerLimitTime | read-create | current | The messenger service limit time. The unit is minute. If the value of h3cDomainMessengerEnable is false, the value of h3cDomainMessengerLimitTime is meaningles… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.10 | Columnh3cDomainMessengerSpanTime | read-create | current | The messenger service span time. The unit is minute. It must be a multiple of 5. If the value of h3cDomainMessengerEnable is false, the value of h3cDomainMesse… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.11 | Columnh3cDomainSelfServiceEnable | read-create | current | The self service control. If set h3cDomainSelfServiceEnable to true, h3cDomainSelfServiceURL must be set to a valid value. Default value is FALSE. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.12 | Columnh3cDomainSelfServiceURL | read-create | current | Self-service URL(Uniform Resource Locator) of the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.13 | Columnh3cDomainAccFailureAction | read-create | current | Defines the action that authentication should be taken if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authenticati… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.14 | Columnh3cDomainRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To de… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.15 | Columnh3cDomainCurrentAccessNum | read-only | current | The current access number of the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.16 | Columnh3cDomainIdleCutTime | read-only | current | Authentication aging time. If no packet is transmitted during the aging time, the authentication is aged out. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.17 | Columnh3cDomainServiceType | read-create | current | Service type of users in the domain, including hsi(1), stb(2), and voip(3). The default value is hsi. The High Speed Internet (hsi) service is applicable to us… |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.18 | Columnh3cDomainIpPoolName | read-create | current | Specifies an IPv4 address pool for users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.1.1.19 | Columnh3cDomainIpv6PoolName | read-create | current | Specifies an IPv6 address pool for users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.2 | Tableh3cDomainSchemeTable | not-accessible | current | The (conceptual) table listing schemes of all domains. |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1 | Rowh3cDomainSchemeEntry | not-accessible | current | An entry (conceptual row) representing an IP pool of a domain |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.1 | Columnh3cDomainSchemeIndex | not-accessible | current | The scheme index of domain, which is an identifier of a domain scheme. |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.2 | Columnh3cDomainSchemeMode | read-create | current | The scheme mode of the domain. Setting h3cDomainSchemeMode to none(1) indicates the domain has none scheme. Setting h3cDomainSchemeMode to local(2) indicates t… |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.3 | Columnh3cDomainAuthSchemeName | read-create | current | The authentication scheme name of domain. If h3cDomainSchemeMode is set to radius, tacacs or ldap, the h3cDomainAuthSchemeName must be configured with a valid … |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.4 | Columnh3cDomainAcctSchemeName | read-create | current | The accounting scheme name of the domain. If h3cDomainSchemeMode is set to radius or tacacs, the h3cDomainAcctSchemeName must be configured with a valid value. |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.5 | Columnh3cDomainSchemeRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which supports active status and createAndGo, destroy operation. To cr… |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.6 | Columnh3cDomainSchemeAAAType | read-create | current | Service Type of the server. |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.7 | Columnh3cDomainSchemeAAAName | read-create | current | The scheme name of the domain, whether the scheme represents accounting, authentication or authorization references the object h3cDomainSchemeAAAType. The valu… |
| 1.3.6.1.4.1.2011.10.2.46.2.2.1.8 | Columnh3cDomainSchemeAccessMode | read-create | current | The access mode of the domain scheme. |
| 1.3.6.1.4.1.2011.10.2.46.2.3 | Tableh3cDomainIpPoolTable | not-accessible | current | The (conceptual) table listing IP pools of all domains. |
| 1.3.6.1.4.1.2011.10.2.46.2.3.1 | Rowh3cDomainIpPoolEntry | not-accessible | current | An entry (conceptual row) representing an IP pool of a domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.3.1.1 | Columnh3cDomainIpPoolNum | not-accessible | current | The number of IP pool, which is an identifier of an IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.3.1.2 | Columnh3cDomainIpPoolLowIpAddrType | read-create | current | The low IP addresses type (IPv4 or IPv6) of IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.3.1.3 | Columnh3cDomainIpPoolLowIpAddr | read-create | current | The low IP address of IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.3.1.4 | Columnh3cDomainIpPoolLen | read-create | current | The length of IP pool. Default value is 1. |
| 1.3.6.1.4.1.2011.10.2.46.2.3.1.5 | Columnh3cDomainIpPoolRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To cr… |
| 1.3.6.1.4.1.2011.10.2.46.2.4 | Tableh3cDomainStatTable | not-accessible | current | The (conceptual) table listing Domain statistics. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1 | Rowh3cDomainStatEntry | not-accessible | current | An entry (conceptual row) representing statistics of a domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.1 | Columnh3cDomainAccessedNum | read-only | current | Total number of users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.2 | Columnh3cDomainOnlineNum | read-only | current | Number of online users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.3 | Columnh3cDomainOnlinePPPUser | read-only | current | Number of online PPP users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.4 | Columnh3cDomainOnlineIPoEUser | read-only | current | Number of online IPoE users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.5 | Columnh3cDomainOnlinePPPoEUser | read-only | current | Number of online PPPoE users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.6 | Columnh3cDomainOnlinePPPoAUser | read-only | current | Number of online PPPoA users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.7 | Columnh3cDomainOnlinePPPoFRUser | read-only | current | Number of online PPPoFR users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.8 | Columnh3cDomainOnlineLacUser | read-only | current | Number of online LAC users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.9 | Columnh3cDomainOnlineLnsUser | read-only | current | Number of online LNS users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.10 | Columnh3cDomainOnlineIPoEBindAuthUser | read-only | current | Number of online IPoE users that use bind authentication in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.11 | Columnh3cDomainOnlineIPoEWebAuthUser | read-only | current | Number of online IPoE users that use WEB authentication in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.4.1.12 | Columnh3cDomainOnlineLeasedUser | read-only | current | Number of online IPoE Leased users in the domain. |
| 1.3.6.1.4.1.2011.10.2.46.2.5 | Tableh3cDomainIPPoolStatTable | not-accessible | current | The (conceptual) table listing IP pool statistics. |
| 1.3.6.1.4.1.2011.10.2.46.2.5.1 | Rowh3cDomainIPPoolStatEntry | not-accessible | current | An entry (conceptual row) representing statistics of an IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.5.1.1 | Columnh3cDomainIPTotalNum | read-only | current | Total number of addresses in the IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.5.1.2 | Columnh3cDomainIPUsedNum | read-only | current | Number of addresses already used in the IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.5.1.3 | Columnh3cDomainIPConflictNum | read-only | current | Number of conflicting addresses in the IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.5.1.4 | Columnh3cDomainIPExcludeNum | read-only | current | Number of addresses excluded from the IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.5.1.5 | Columnh3cDomainIPIdleNum | read-only | current | Number of idle addresses in the IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.2.5.1.6 | Columnh3cDomainIPUsedPercent | read-only | current | Address occupancy rate in the IP pool. |
| 1.3.6.1.4.1.2011.10.2.46.3 | Nodeh3cDomainGlobalStat | |||
| 1.3.6.1.4.1.2011.10.2.46.3.1 | Scalarh3cDomainGlobalAccessedNum | read-only | current | Number of users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.2 | Scalarh3cDomainGlobalOnlineNum | read-only | current | Number of online users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.3 | Scalarh3cDomainGlobalOnlinePPPUser | read-only | current | Number of online PPP users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.4 | Scalarh3cDomainGlobalOnlineIPoEUser | read-only | current | Number of online IPoE users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.5 | Scalarh3cDomainGlobalOnlinePPPoEUser | read-only | current | Number of online PPPoE users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.6 | Scalarh3cDomainGlobalOnlinePPPoAUser | read-only | current | Number of online PPPoA users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.7 | Scalarh3cDomainGlobalOnlinePPPoFRUser | read-only | current | Number of online PPPoFR users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.8 | Scalarh3cDomainGlobalOnlineLacUser | read-only | current | Number of online LAC users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.9 | Scalarh3cDomainGlobalOnlineLnsUser | read-only | current | Number of online LNS users in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.10 | Scalarh3cDomainGlobalOnlineIPoEBindAuthUser | read-only | current | Number of online IPoE users that use bind authentication in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.11 | Scalarh3cDomainGlobalOnlineIPoEWebAuthUser | read-only | current | Number of online IPoE users that use WEB authentication in all domains. |
| 1.3.6.1.4.1.2011.10.2.46.3.12 | Scalarh3cDomainGlobalOnlineLeasedUser | read-only | current | Number of online IPoE Leased users in all domains. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cAAATypeDomainScheme | INTEGER { accounting(1), authentication(2), authorization(3), none(4) } | current | The service type of the server. |
| H3cAccessModeofDomainScheme | INTEGER { default(1), login(2), lanAccess(3), portal(4), ppp(5), gcm(6), dvpn(7), dhcp(8), voice(9), superauthen(10), command(11), reserved(12) } | current | The access mode of the domain. |
| H3cModeOfDomainScheme | INTEGER { none(1), local(2), radius(3), tacacs(4), ldap(5) } | current | The scheme mode of the domain. none: indicates the domain has no scheme. local:indicates the domain will use local-server as a scheme. radius:indicates the domain will use radius scheme. tacacs:indicates the domain will… |