H3C-DSP-MIB
22 objects
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
Imported Objects
| ENTITY-MIB | PhysicalIndex |
| HUAWEI-3COM-OID-MIB | h3cCommon |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.89 | Identityh3cDSP | This MIB is to provide the definition of the DSP(Digital Signal Processing) status. | ||
| 1.3.6.1.4.1.2011.10.2.89.1 | Tableh3cVPMStatusTable | not-accessible | current | The table contains status parameters of VPM(Voice Process Module) card. |
| 1.3.6.1.4.1.2011.10.2.89.1.1 | Rowh3cVPMStatusEntry | not-accessible | current | The entry of VPM status table. |
| 1.3.6.1.4.1.2011.10.2.89.1.1.1 | Columnh3cVPMIndex | accessible-for-notify | current | The index for this entry. The sequence of VPM card in the chassis is from the top to bottom. |
| 1.3.6.1.4.1.2011.10.2.89.1.1.2 | Columnh3cVPMEnPhysicalIndex | read-only | current | The object corresponds to PhysicalIndex in the chassis. |
| 1.3.6.1.4.1.2011.10.2.89.1.1.3 | Columnh3cVPMState | read-only | current | The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need a… |
| 1.3.6.1.4.1.2011.10.2.89.1.1.4 | Columnh3cVPMResourceUtilization | read-only | current | The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handli… |
| 1.3.6.1.4.1.2011.10.2.89.1.1.5 | Columnh3cVPMHiWaterUtilization | read-only | current | The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured. |
| 1.3.6.1.4.1.2011.10.2.89.1.1.6 | Columnh3cVPMMaxChannel | read-only | current | The maximum number of channels can be supported in each VPM card. |
| 1.3.6.1.4.1.2011.10.2.89.2 | Tableh3cDSPStatusTable | not-accessible | current | The table contains status parameters of DSP(Digital Signal Processing) card. |
| 1.3.6.1.4.1.2011.10.2.89.2.1 | Rowh3cDSPStatusEntry | not-accessible | current | The entry of DSP status table. |
| 1.3.6.1.4.1.2011.10.2.89.2.1.1 | Columnh3cDSPIndex | accessible-for-notify | current | The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left. |
| 1.3.6.1.4.1.2011.10.2.89.2.1.2 | Columnh3cDSPVPMIndex | read-only | current | The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this… |
| 1.3.6.1.4.1.2011.10.2.89.2.1.3 | Columnh3cDSPEnPhysicalIndex | read-only | current | The object corresponds to PhysicalIndex in the chassis. |
| 1.3.6.1.4.1.2011.10.2.89.2.1.4 | Columnh3cDSPResetTime | read-only | current | The value of sysUpTime from the last DSP reset occurred. |
| 1.3.6.1.4.1.2011.10.2.89.2.1.5 | Columnh3cDSPMaxChannel | read-only | current | The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality. |
| 1.3.6.1.4.1.2011.10.2.89.2.1.6 | Columnh3cDSPState | read-only | current | The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in of… |
| 1.3.6.1.4.1.2011.10.2.89.2.1.7 | Columnh3cDSPInUseChannel | read-only | current | The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after t… |
| 1.3.6.1.4.1.2011.10.2.89.3 | Nodeh3cDSPTrap | |||
| 1.3.6.1.4.1.2011.10.2.89.3.0 | Nodeh3cDSPTrapPrex | |||
| 1.3.6.1.4.1.2011.10.2.89.3.0.1 | Notificationh3cVPMStateChange | current | This trap is sent when VPM state changes. | |
| 1.3.6.1.4.1.2011.10.2.89.3.0.2 | Notificationh3cDSPStateChange | current | This trap is sent when DSP state changes. |